[MIPS] Sibyte: Split and move clock code.
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
This commit is contained in:
Родитель
f3f9ad0edc
Коммит
217dd11e9d
|
@ -733,15 +733,27 @@ config ARCH_MAY_HAVE_PC_FDC
|
|||
config BOOT_RAW
|
||||
bool
|
||||
|
||||
config CEVT_BCM1480
|
||||
bool
|
||||
|
||||
config CEVT_GT641XX
|
||||
bool
|
||||
|
||||
config CEVT_R4K
|
||||
bool
|
||||
|
||||
config CEVT_SB1250
|
||||
bool
|
||||
|
||||
config CEVT_TXX9
|
||||
bool
|
||||
|
||||
config CSRC_BCM1480
|
||||
bool
|
||||
|
||||
config CSRC_SB1250
|
||||
bool
|
||||
|
||||
config CFE
|
||||
bool
|
||||
|
||||
|
|
|
@ -8,9 +8,13 @@ obj-y += cpu-probe.o branch.o entry.o genex.o irq.o process.o \
|
|||
ptrace.o reset.o semaphore.o setup.o signal.o syscall.o \
|
||||
time.o topology.o traps.o unaligned.o
|
||||
|
||||
obj-$(CONFIG_CEVT_BCM1480) += cevt-bcm1480.o
|
||||
obj-$(CONFIG_CEVT_R4K) += cevt-r4k.o
|
||||
obj-$(CONFIG_CEVT_GT641XX) += cevt-gt641xx.o
|
||||
obj-$(CONFIG_CEVT_SB1250) += cevt-sb1250.o
|
||||
obj-$(CONFIG_CEVT_TXX9) += cevt-txx9.o
|
||||
obj-$(CONFIG_CSRC_BCM1480) += csrc-bcm1480.o
|
||||
obj-$(CONFIG_CSRC_SB1250) += csrc-sb1250.o
|
||||
|
||||
binfmt_irix-objs := irixelf.o irixinv.o irixioctl.o irixsig.o \
|
||||
irix5sys.o sysirix.o
|
||||
|
|
|
@ -0,0 +1,149 @@
|
|||
/*
|
||||
* Copyright (C) 2000,2001,2004 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/percpu.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/bcm1480_regs.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/bcm1480_int.h>
|
||||
#include <asm/sibyte/bcm1480_scd.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
|
||||
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
|
||||
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
|
||||
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
|
||||
|
||||
/*
|
||||
* The general purpose timer ticks at 1MHz independent if
|
||||
* the rest of the system
|
||||
*/
|
||||
static void sibyte_set_mode(enum clock_event_mode mode,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
__raw_writeq(0, cfg);
|
||||
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
/* Stop the timer until we actually program a shot */
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
__raw_writeq(0, cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
__raw_writeq(delta - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct clock_event_device *cd = dev_id;
|
||||
void __iomem *cfg;
|
||||
unsigned long tmode;
|
||||
|
||||
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
|
||||
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
|
||||
else
|
||||
tmode = 0;
|
||||
|
||||
/* ACK interrupt */
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
____raw_writeq(tmode, cfg);
|
||||
|
||||
cd->event_handler(cd);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
|
||||
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
|
||||
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
|
||||
|
||||
void __cpuinit sb1480_clockevent_init(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
|
||||
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
|
||||
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
|
||||
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
|
||||
|
||||
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
|
||||
|
||||
sprintf(name, "bcm1480-counter-%d", cpu);
|
||||
cd->name = name;
|
||||
cd->features = CLOCK_EVT_FEAT_PERIODIC |
|
||||
CLOCK_EVT_FEAT_ONESHOT;
|
||||
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
|
||||
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
|
||||
cd->min_delta_ns = clockevent_delta2ns(1, cd);
|
||||
cd->rating = 200;
|
||||
cd->irq = irq;
|
||||
cd->cpumask = cpumask_of_cpu(cpu);
|
||||
cd->set_next_event = sibyte_next_event;
|
||||
cd->set_mode = sibyte_set_mode;
|
||||
clockevents_register_device(cd);
|
||||
|
||||
bcm1480_mask_irq(cpu, irq);
|
||||
|
||||
/*
|
||||
* Map the timer interrupt to IP[4] of this cpu
|
||||
*/
|
||||
__raw_writeq(IMR_IP4_VAL,
|
||||
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
|
||||
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
|
||||
|
||||
bcm1480_unmask_irq(cpu, irq);
|
||||
|
||||
action->handler = sibyte_counter_handler;
|
||||
action->flags = IRQF_DISABLED | IRQF_PERCPU;
|
||||
action->name = name;
|
||||
action->dev_id = cd;
|
||||
setup_irq(irq, action);
|
||||
}
|
|
@ -0,0 +1,148 @@
|
|||
/*
|
||||
* Copyright (C) 2000, 2001 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/percpu.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/sb1250_int.h>
|
||||
#include <asm/sibyte/sb1250_scd.h>
|
||||
|
||||
#define IMR_IP2_VAL K_INT_MAP_I0
|
||||
#define IMR_IP3_VAL K_INT_MAP_I1
|
||||
#define IMR_IP4_VAL K_INT_MAP_I2
|
||||
|
||||
/*
|
||||
* The general purpose timer ticks at 1MHz independent if
|
||||
* the rest of the system
|
||||
*/
|
||||
static void sibyte_set_mode(enum clock_event_mode mode,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
__raw_writeq(0, cfg);
|
||||
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
/* Stop the timer until we actually program a shot */
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
__raw_writeq(0, cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
__raw_writeq(delta - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct clock_event_device *cd = dev_id;
|
||||
void __iomem *cfg;
|
||||
unsigned long tmode;
|
||||
|
||||
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
|
||||
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
|
||||
else
|
||||
tmode = 0;
|
||||
|
||||
/* ACK interrupt */
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
____raw_writeq(tmode, cfg);
|
||||
|
||||
cd->event_handler(cd);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
|
||||
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
|
||||
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
|
||||
|
||||
void __cpuinit sb1250_clockevent_init(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
unsigned int irq = K_INT_TIMER_0 + cpu;
|
||||
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
|
||||
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
|
||||
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
|
||||
|
||||
/* Only have 4 general purpose timers, and we use last one as hpt */
|
||||
BUG_ON(cpu > 2);
|
||||
|
||||
sprintf(name, "sb1250-counter-%d", cpu);
|
||||
cd->name = name;
|
||||
cd->features = CLOCK_EVT_FEAT_PERIODIC |
|
||||
CLOCK_EVT_FEAT_ONESHOT;
|
||||
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
|
||||
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
|
||||
cd->min_delta_ns = clockevent_delta2ns(1, cd);
|
||||
cd->rating = 200;
|
||||
cd->irq = irq;
|
||||
cd->cpumask = cpumask_of_cpu(cpu);
|
||||
cd->set_next_event = sibyte_next_event;
|
||||
cd->set_mode = sibyte_set_mode;
|
||||
clockevents_register_device(cd);
|
||||
|
||||
sb1250_mask_irq(cpu, irq);
|
||||
|
||||
/*
|
||||
* Map the timer interrupt to IP[4] of this cpu
|
||||
*/
|
||||
__raw_writeq(IMR_IP4_VAL,
|
||||
IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
|
||||
(irq << 3)));
|
||||
|
||||
sb1250_unmask_irq(cpu, irq);
|
||||
|
||||
action->handler = sibyte_counter_handler;
|
||||
action->flags = IRQF_DISABLED | IRQF_PERCPU;
|
||||
action->name = name;
|
||||
action->dev_id = cd;
|
||||
setup_irq(irq, action);
|
||||
}
|
|
@ -0,0 +1,54 @@
|
|||
/*
|
||||
* Copyright (C) 2000,2001,2004 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clocksource.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/bcm1480_regs.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/bcm1480_int.h>
|
||||
#include <asm/sibyte/bcm1480_scd.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
|
||||
static cycle_t bcm1480_hpt_read(void)
|
||||
{
|
||||
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
|
||||
}
|
||||
|
||||
struct clocksource bcm1480_clocksource = {
|
||||
.name = "zbbus-cycles",
|
||||
.rating = 200,
|
||||
.read = bcm1480_hpt_read,
|
||||
.mask = CLOCKSOURCE_MASK(64),
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
void __init sb1480_clocksource_init(void)
|
||||
{
|
||||
struct clocksource *cs = &bcm1480_clocksource;
|
||||
unsigned int plldiv;
|
||||
unsigned long zbbus;
|
||||
|
||||
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
|
||||
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
|
||||
clocksource_set_clock(cs, zbbus);
|
||||
clocksource_register(cs);
|
||||
}
|
|
@ -0,0 +1,70 @@
|
|||
/*
|
||||
* Copyright (C) 2000, 2001 Broadcom Corporation
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation; either version 2
|
||||
* of the License, or (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clocksource.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/sb1250_int.h>
|
||||
#include <asm/sibyte/sb1250_scd.h>
|
||||
|
||||
#define SB1250_HPT_NUM 3
|
||||
#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
|
||||
|
||||
/*
|
||||
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
|
||||
* again.
|
||||
*/
|
||||
static cycle_t sb1250_hpt_read(void)
|
||||
{
|
||||
unsigned int count;
|
||||
|
||||
count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
|
||||
|
||||
return SB1250_HPT_VALUE - count;
|
||||
}
|
||||
|
||||
struct clocksource bcm1250_clocksource = {
|
||||
.name = "MIPS",
|
||||
.rating = 200,
|
||||
.read = sb1250_hpt_read,
|
||||
.mask = CLOCKSOURCE_MASK(23),
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
void __init sb1250_clocksource_init(void)
|
||||
{
|
||||
struct clocksource *cs = &bcm1250_clocksource;
|
||||
|
||||
/* Setup hpt using timer #3 but do not enable irq for it */
|
||||
__raw_writeq(0,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_CFG)));
|
||||
__raw_writeq(SB1250_HPT_VALUE,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_INIT)));
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_CFG)));
|
||||
|
||||
clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
|
||||
clocksource_register(cs);
|
||||
}
|
|
@ -1,5 +1,7 @@
|
|||
config SIBYTE_SB1250
|
||||
bool
|
||||
select CEVT_SB1250
|
||||
select CSRC_SB1250
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select SIBYTE_ENABLE_LDT_IF_PCI
|
||||
|
@ -9,6 +11,8 @@ config SIBYTE_SB1250
|
|||
|
||||
config SIBYTE_BCM1120
|
||||
bool
|
||||
select CEVT_SB1250
|
||||
select CSRC_SB1250
|
||||
select IRQ_CPU
|
||||
select SIBYTE_BCM112X
|
||||
select SIBYTE_HAS_ZBUS_PROFILING
|
||||
|
@ -16,6 +20,8 @@ config SIBYTE_BCM1120
|
|||
|
||||
config SIBYTE_BCM1125
|
||||
bool
|
||||
select CEVT_SB1250
|
||||
select CSRC_SB1250
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select SIBYTE_BCM112X
|
||||
|
@ -24,6 +30,8 @@ config SIBYTE_BCM1125
|
|||
|
||||
config SIBYTE_BCM1125H
|
||||
bool
|
||||
select CEVT_SB1250
|
||||
select CSRC_SB1250
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select SIBYTE_BCM112X
|
||||
|
@ -33,12 +41,16 @@ config SIBYTE_BCM1125H
|
|||
|
||||
config SIBYTE_BCM112X
|
||||
bool
|
||||
select CEVT_SB1250
|
||||
select CSRC_SB1250
|
||||
select IRQ_CPU
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
select SIBYTE_HAS_ZBUS_PROFILING
|
||||
|
||||
config SIBYTE_BCM1x80
|
||||
bool
|
||||
select CEVT_BCM1480
|
||||
select CSRC_BCM1480
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select SIBYTE_HAS_ZBUS_PROFILING
|
||||
|
@ -47,6 +59,8 @@ config SIBYTE_BCM1x80
|
|||
|
||||
config SIBYTE_BCM1x55
|
||||
bool
|
||||
select CEVT_BCM1480
|
||||
select CSRC_BCM1480
|
||||
select HW_HAS_PCI
|
||||
select IRQ_CPU
|
||||
select SIBYTE_SB1xxx_SOC
|
||||
|
|
|
@ -15,164 +15,10 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/percpu.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/bcm1480_regs.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/bcm1480_int.h>
|
||||
#include <asm/sibyte/bcm1480_scd.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
|
||||
|
||||
#define IMR_IP2_VAL K_BCM1480_INT_MAP_I0
|
||||
#define IMR_IP3_VAL K_BCM1480_INT_MAP_I1
|
||||
#define IMR_IP4_VAL K_BCM1480_INT_MAP_I2
|
||||
|
||||
/*
|
||||
* The general purpose timer ticks at 1MHz independent if
|
||||
* the rest of the system
|
||||
*/
|
||||
static void sibyte_set_mode(enum clock_event_mode mode,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
__raw_writeq(0, cfg);
|
||||
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
/* Stop the timer until we actually program a shot */
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
__raw_writeq(0, cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
__raw_writeq(delta - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct clock_event_device *cd = dev_id;
|
||||
void __iomem *cfg;
|
||||
unsigned long tmode;
|
||||
|
||||
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
|
||||
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
|
||||
else
|
||||
tmode = 0;
|
||||
|
||||
/* ACK interrupt */
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
____raw_writeq(tmode, cfg);
|
||||
|
||||
cd->event_handler(cd);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
|
||||
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
|
||||
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
|
||||
|
||||
void __cpuinit sb1480_clockevent_init(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
unsigned int irq = K_BCM1480_INT_TIMER_0 + cpu;
|
||||
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
|
||||
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
|
||||
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
|
||||
|
||||
BUG_ON(cpu > 3); /* Only have 4 general purpose timers */
|
||||
|
||||
sprintf(name, "bcm1480-counter-%d", cpu);
|
||||
cd->name = name;
|
||||
cd->features = CLOCK_EVT_FEAT_PERIODIC |
|
||||
CLOCK_EVT_FEAT_ONESHOT;
|
||||
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
|
||||
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
|
||||
cd->min_delta_ns = clockevent_delta2ns(1, cd);
|
||||
cd->rating = 200;
|
||||
cd->irq = irq;
|
||||
cd->cpumask = cpumask_of_cpu(cpu);
|
||||
cd->set_next_event = sibyte_next_event;
|
||||
cd->set_mode = sibyte_set_mode;
|
||||
clockevents_register_device(cd);
|
||||
|
||||
bcm1480_mask_irq(cpu, irq);
|
||||
|
||||
/*
|
||||
* Map the timer interrupt to IP[4] of this cpu
|
||||
*/
|
||||
__raw_writeq(IMR_IP4_VAL,
|
||||
IOADDR(A_BCM1480_IMR_REGISTER(cpu,
|
||||
R_BCM1480_IMR_INTERRUPT_MAP_BASE_H) + (irq << 3)));
|
||||
|
||||
bcm1480_unmask_irq(cpu, irq);
|
||||
|
||||
action->handler = sibyte_counter_handler;
|
||||
action->flags = IRQF_DISABLED | IRQF_PERCPU;
|
||||
action->name = name;
|
||||
action->dev_id = cd;
|
||||
setup_irq(irq, action);
|
||||
}
|
||||
|
||||
static cycle_t bcm1480_hpt_read(void)
|
||||
{
|
||||
return (cycle_t) __raw_readq(IOADDR(A_SCD_ZBBUS_CYCLE_COUNT));
|
||||
}
|
||||
|
||||
struct clocksource bcm1480_clocksource = {
|
||||
.name = "zbbus-cycles",
|
||||
.rating = 200,
|
||||
.read = bcm1480_hpt_read,
|
||||
.mask = CLOCKSOURCE_MASK(64),
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
void __init sb1480_clocksource_init(void)
|
||||
{
|
||||
struct clocksource *cs = &bcm1480_clocksource;
|
||||
unsigned int plldiv;
|
||||
unsigned long zbbus;
|
||||
|
||||
plldiv = G_BCM1480_SYS_PLL_DIV(__raw_readq(IOADDR(A_SCD_SYSTEM_CFG)));
|
||||
zbbus = ((plldiv >> 1) * 50000000) + ((plldiv & 1) * 25000000);
|
||||
clocksource_set_clock(cs, zbbus);
|
||||
clocksource_register(cs);
|
||||
}
|
||||
extern void sb1480_clockevent_init(void);
|
||||
extern void sb1480_clocksource_init(void);
|
||||
|
||||
void __init plat_time_init(void)
|
||||
{
|
||||
|
|
|
@ -15,180 +15,10 @@
|
|||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
|
||||
*/
|
||||
#include <linux/clockchips.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/percpu.h>
|
||||
#include <linux/init.h>
|
||||
|
||||
#include <asm/addrspace.h>
|
||||
#include <asm/io.h>
|
||||
#include <asm/time.h>
|
||||
|
||||
#include <asm/sibyte/sb1250.h>
|
||||
#include <asm/sibyte/sb1250_regs.h>
|
||||
#include <asm/sibyte/sb1250_int.h>
|
||||
#include <asm/sibyte/sb1250_scd.h>
|
||||
|
||||
#define IMR_IP2_VAL K_INT_MAP_I0
|
||||
#define IMR_IP3_VAL K_INT_MAP_I1
|
||||
#define IMR_IP4_VAL K_INT_MAP_I2
|
||||
|
||||
#define SB1250_HPT_NUM 3
|
||||
#define SB1250_HPT_VALUE M_SCD_TIMER_CNT /* max value */
|
||||
|
||||
/*
|
||||
* The general purpose timer ticks at 1MHz independent if
|
||||
* the rest of the system
|
||||
*/
|
||||
static void sibyte_set_mode(enum clock_event_mode mode,
|
||||
struct clock_event_device *evt)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
switch (mode) {
|
||||
case CLOCK_EVT_MODE_PERIODIC:
|
||||
__raw_writeq(0, cfg);
|
||||
__raw_writeq((V_SCD_TIMER_FREQ / HZ) - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_ONESHOT:
|
||||
/* Stop the timer until we actually program a shot */
|
||||
case CLOCK_EVT_MODE_SHUTDOWN:
|
||||
__raw_writeq(0, cfg);
|
||||
break;
|
||||
|
||||
case CLOCK_EVT_MODE_UNUSED: /* shuddup gcc */
|
||||
case CLOCK_EVT_MODE_RESUME:
|
||||
;
|
||||
}
|
||||
}
|
||||
|
||||
static int sibyte_next_event(unsigned long delta, struct clock_event_device *cd)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
void __iomem *cfg, *init;
|
||||
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
init = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_INIT));
|
||||
|
||||
__raw_writeq(delta - 1, init);
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE, cfg);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static irqreturn_t sibyte_counter_handler(int irq, void *dev_id)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
struct clock_event_device *cd = dev_id;
|
||||
void __iomem *cfg;
|
||||
unsigned long tmode;
|
||||
|
||||
if (cd->mode == CLOCK_EVT_MODE_PERIODIC)
|
||||
tmode = M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS;
|
||||
else
|
||||
tmode = 0;
|
||||
|
||||
/* ACK interrupt */
|
||||
cfg = IOADDR(A_SCD_TIMER_REGISTER(cpu, R_SCD_TIMER_CFG));
|
||||
____raw_writeq(tmode, cfg);
|
||||
|
||||
cd->event_handler(cd);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static DEFINE_PER_CPU(struct clock_event_device, sibyte_hpt_clockevent);
|
||||
static DEFINE_PER_CPU(struct irqaction, sibyte_hpt_irqaction);
|
||||
static DEFINE_PER_CPU(char [18], sibyte_hpt_name);
|
||||
|
||||
void __cpuinit sb1250_clockevent_init(void)
|
||||
{
|
||||
unsigned int cpu = smp_processor_id();
|
||||
unsigned int irq = K_INT_TIMER_0 + cpu;
|
||||
struct irqaction *action = &per_cpu(sibyte_hpt_irqaction, cpu);
|
||||
struct clock_event_device *cd = &per_cpu(sibyte_hpt_clockevent, cpu);
|
||||
unsigned char *name = per_cpu(sibyte_hpt_name, cpu);
|
||||
|
||||
/* Only have 4 general purpose timers, and we use last one as hpt */
|
||||
BUG_ON(cpu > 2);
|
||||
|
||||
sprintf(name, "sb1250-counter-%d", cpu);
|
||||
cd->name = name;
|
||||
cd->features = CLOCK_EVT_FEAT_PERIODIC |
|
||||
CLOCK_EVT_FEAT_ONESHOT;
|
||||
clockevent_set_clock(cd, V_SCD_TIMER_FREQ);
|
||||
cd->max_delta_ns = clockevent_delta2ns(0x7fffff, cd);
|
||||
cd->min_delta_ns = clockevent_delta2ns(1, cd);
|
||||
cd->rating = 200;
|
||||
cd->irq = irq;
|
||||
cd->cpumask = cpumask_of_cpu(cpu);
|
||||
cd->set_next_event = sibyte_next_event;
|
||||
cd->set_mode = sibyte_set_mode;
|
||||
clockevents_register_device(cd);
|
||||
|
||||
sb1250_mask_irq(cpu, irq);
|
||||
|
||||
/*
|
||||
* Map the timer interrupt to IP[4] of this cpu
|
||||
*/
|
||||
__raw_writeq(IMR_IP4_VAL,
|
||||
IOADDR(A_IMR_REGISTER(cpu, R_IMR_INTERRUPT_MAP_BASE) +
|
||||
(irq << 3)));
|
||||
|
||||
sb1250_unmask_irq(cpu, irq);
|
||||
|
||||
action->handler = sibyte_counter_handler;
|
||||
action->flags = IRQF_DISABLED | IRQF_PERCPU;
|
||||
action->name = name;
|
||||
action->dev_id = cd;
|
||||
setup_irq(irq, action);
|
||||
}
|
||||
|
||||
/*
|
||||
* The HPT is free running from SB1250_HPT_VALUE down to 0 then starts over
|
||||
* again.
|
||||
*/
|
||||
static cycle_t sb1250_hpt_read(void)
|
||||
{
|
||||
unsigned int count;
|
||||
|
||||
count = G_SCD_TIMER_CNT(__raw_readq(IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM, R_SCD_TIMER_CNT))));
|
||||
|
||||
return SB1250_HPT_VALUE - count;
|
||||
}
|
||||
|
||||
struct clocksource bcm1250_clocksource = {
|
||||
.name = "MIPS",
|
||||
.rating = 200,
|
||||
.read = sb1250_hpt_read,
|
||||
.mask = CLOCKSOURCE_MASK(23),
|
||||
.flags = CLOCK_SOURCE_IS_CONTINUOUS,
|
||||
};
|
||||
|
||||
void __init sb1250_clocksource_init(void)
|
||||
{
|
||||
struct clocksource *cs = &bcm1250_clocksource;
|
||||
|
||||
/* Setup hpt using timer #3 but do not enable irq for it */
|
||||
__raw_writeq(0,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_CFG)));
|
||||
__raw_writeq(SB1250_HPT_VALUE,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_INIT)));
|
||||
__raw_writeq(M_SCD_TIMER_ENABLE | M_SCD_TIMER_MODE_CONTINUOUS,
|
||||
IOADDR(A_SCD_TIMER_REGISTER(SB1250_HPT_NUM,
|
||||
R_SCD_TIMER_CFG)));
|
||||
|
||||
clocksource_set_clock(cs, V_SCD_TIMER_FREQ);
|
||||
clocksource_register(cs);
|
||||
}
|
||||
extern void sb1250_clocksource_init(void);
|
||||
extern void sb1250_clockevent_init(void);
|
||||
|
||||
void __init plat_time_init(void)
|
||||
{
|
||||
|
|
Загрузка…
Ссылка в новой задаче