From 21a75f0915dde8674708b39abfcda113911c49b1 Mon Sep 17 00:00:00 2001 From: Jay Vosburgh Date: Tue, 2 Feb 2016 13:35:56 -0800 Subject: [PATCH] bonding: Fix ARP monitor validation The current logic in bond_arp_rcv will accept an incoming ARP for validation if (a) the receiving slave is either "active" (which includes the currently active slave, or the current ARP slave) or, (b) there is a currently active slave, and it has received an ARP since it became active. For case (b), the receiving slave isn't the currently active slave, and is receiving the original broadcast ARP request, not an ARP reply from the target. This logic can fail if there is no currently active slave. In this situation, the ARP probe logic cycles through all slaves, assigning each in turn as the "current_arp_slave" for one arp_interval, then setting that one as "active," and sending an ARP probe from that slave. The current logic expects the ARP reply to arrive on the sending current_arp_slave, however, due to switch FDB updating delays, the reply may be directed to another slave. This can arise if the bonding slaves and switch are working, but the ARP target is not responding. When the ARP target recovers, a condition may result wherein the ARP target host replies faster than the switch can update its forwarding table, causing each ARP reply to be sent to the previous current_arp_slave. This will never pass the logic in bond_arp_rcv, as neither of the above conditions (a) or (b) are met. Some experimentation on a LAN shows ARP reply round trips in the 200 usec range, but my available switches never update their FDB in less than 4000 usec. This patch changes the logic in bond_arp_rcv to additionally accept an ARP reply for validation on any slave if there is a current ARP slave and it sent an ARP probe during the previous arp_interval. Fixes: aeea64ac717a ("bonding: don't trust arp requests unless active slave really works") Cc: Veaceslav Falico Cc: Andy Gospodarek Signed-off-by: Jay Vosburgh Signed-off-by: David S. Miller --- drivers/net/bonding/bond_main.c | 39 +++++++++++++++++++++++---------- 1 file changed, 28 insertions(+), 11 deletions(-) diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 56b560558884..65a4107749df 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -214,6 +214,8 @@ static void bond_uninit(struct net_device *bond_dev); static struct rtnl_link_stats64 *bond_get_stats(struct net_device *bond_dev, struct rtnl_link_stats64 *stats); static void bond_slave_arr_handler(struct work_struct *work); +static bool bond_time_in_interval(struct bonding *bond, unsigned long last_act, + int mod); /*---------------------------- General routines -----------------------------*/ @@ -2459,7 +2461,7 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, struct slave *slave) { struct arphdr *arp = (struct arphdr *)skb->data; - struct slave *curr_active_slave; + struct slave *curr_active_slave, *curr_arp_slave; unsigned char *arp_ptr; __be32 sip, tip; int alen, is_arp = skb->protocol == __cpu_to_be16(ETH_P_ARP); @@ -2506,26 +2508,41 @@ int bond_arp_rcv(const struct sk_buff *skb, struct bonding *bond, &sip, &tip); curr_active_slave = rcu_dereference(bond->curr_active_slave); + curr_arp_slave = rcu_dereference(bond->current_arp_slave); - /* Backup slaves won't see the ARP reply, but do come through - * here for each ARP probe (so we swap the sip/tip to validate - * the probe). In a "redundant switch, common router" type of - * configuration, the ARP probe will (hopefully) travel from - * the active, through one switch, the router, then the other - * switch before reaching the backup. + /* We 'trust' the received ARP enough to validate it if: * - * We 'trust' the arp requests if there is an active slave and - * it received valid arp reply(s) after it became active. This - * is done to avoid endless looping when we can't reach the + * (a) the slave receiving the ARP is active (which includes the + * current ARP slave, if any), or + * + * (b) the receiving slave isn't active, but there is a currently + * active slave and it received valid arp reply(s) after it became + * the currently active slave, or + * + * (c) there is an ARP slave that sent an ARP during the prior ARP + * interval, and we receive an ARP reply on any slave. We accept + * these because switch FDB update delays may deliver the ARP + * reply to a slave other than the sender of the ARP request. + * + * Note: for (b), backup slaves are receiving the broadcast ARP + * request, not a reply. This request passes from the sending + * slave through the L2 switch(es) to the receiving slave. Since + * this is checking the request, sip/tip are swapped for + * validation. + * + * This is done to avoid endless looping when we can't reach the * arp_ip_target and fool ourselves with our own arp requests. */ - if (bond_is_active_slave(slave)) bond_validate_arp(bond, slave, sip, tip); else if (curr_active_slave && time_after(slave_last_rx(bond, curr_active_slave), curr_active_slave->last_link_up)) bond_validate_arp(bond, slave, tip, sip); + else if (curr_arp_slave && (arp->ar_op == htons(ARPOP_REPLY)) && + bond_time_in_interval(bond, + dev_trans_start(curr_arp_slave->dev), 1)) + bond_validate_arp(bond, slave, sip, tip); out_unlock: if (arp != (struct arphdr *)skb->data)