PCI: aardvark: Implement re-issuing config requests on CRS response
Commit 43f5c77bcb
("PCI: aardvark: Fix reporting CRS value") fixed
handling of CRS response and when CRSSVE flag was not enabled it marked CRS
response as failed transaction (due to simplicity).
But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
for PIO config response and so we can with a small change implement
re-issuing of config requests as described in PCIe base specification.
This change implements re-issuing of config requests when response is CRS.
Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
transaction is marked as failed and an all-ones value is returned as
before.
We do this by returning appropriate error codes from function
advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
reissues transaction.
Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
This commit is contained in:
Родитель
67cb2a4c93
Коммит
223dec14a0
|
@ -603,6 +603,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
u32 reg;
|
||||
unsigned int status;
|
||||
char *strcomp_status, *str_posted;
|
||||
int ret;
|
||||
|
||||
reg = advk_readl(pcie, PIO_STAT);
|
||||
status = (reg & PIO_COMPLETION_STATUS_MASK) >>
|
||||
|
@ -627,6 +628,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
case PIO_COMPLETION_STATUS_OK:
|
||||
if (reg & PIO_ERR_STATUS) {
|
||||
strcomp_status = "COMP_ERR";
|
||||
ret = -EFAULT;
|
||||
break;
|
||||
}
|
||||
/* Get the read result */
|
||||
|
@ -634,9 +636,11 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
*val = advk_readl(pcie, PIO_RD_DATA);
|
||||
/* No error */
|
||||
strcomp_status = NULL;
|
||||
ret = 0;
|
||||
break;
|
||||
case PIO_COMPLETION_STATUS_UR:
|
||||
strcomp_status = "UR";
|
||||
ret = -EOPNOTSUPP;
|
||||
break;
|
||||
case PIO_COMPLETION_STATUS_CRS:
|
||||
if (allow_crs && val) {
|
||||
|
@ -654,6 +658,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
*/
|
||||
*val = CFG_RD_CRS_VAL;
|
||||
strcomp_status = NULL;
|
||||
ret = 0;
|
||||
break;
|
||||
}
|
||||
/* PCIe r4.0, sec 2.3.2, says:
|
||||
|
@ -669,21 +674,24 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
* Request and taking appropriate action, e.g., complete the
|
||||
* Request to the host as a failed transaction.
|
||||
*
|
||||
* To simplify implementation do not re-issue the Configuration
|
||||
* Request and complete the Request as a failed transaction.
|
||||
* So return -EAGAIN and caller (pci-aardvark.c driver) will
|
||||
* re-issue request again up to the PIO_RETRY_CNT retries.
|
||||
*/
|
||||
strcomp_status = "CRS";
|
||||
ret = -EAGAIN;
|
||||
break;
|
||||
case PIO_COMPLETION_STATUS_CA:
|
||||
strcomp_status = "CA";
|
||||
ret = -ECANCELED;
|
||||
break;
|
||||
default:
|
||||
strcomp_status = "Unknown";
|
||||
ret = -EINVAL;
|
||||
break;
|
||||
}
|
||||
|
||||
if (!strcomp_status)
|
||||
return 0;
|
||||
return ret;
|
||||
|
||||
if (reg & PIO_NON_POSTED_REQ)
|
||||
str_posted = "Non-posted";
|
||||
|
@ -693,7 +701,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
|
|||
dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
|
||||
str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
|
||||
|
||||
return -EFAULT;
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int advk_pcie_wait_pio(struct advk_pcie *pcie)
|
||||
|
@ -701,13 +709,13 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
|
|||
struct device *dev = &pcie->pdev->dev;
|
||||
int i;
|
||||
|
||||
for (i = 0; i < PIO_RETRY_CNT; i++) {
|
||||
for (i = 1; i <= PIO_RETRY_CNT; i++) {
|
||||
u32 start, isr;
|
||||
|
||||
start = advk_readl(pcie, PIO_START);
|
||||
isr = advk_readl(pcie, PIO_ISR);
|
||||
if (!start && isr)
|
||||
return 0;
|
||||
return i;
|
||||
udelay(PIO_RETRY_DELAY);
|
||||
}
|
||||
|
||||
|
@ -898,6 +906,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
|
|||
int where, int size, u32 *val)
|
||||
{
|
||||
struct advk_pcie *pcie = bus->sysdata;
|
||||
int retry_count;
|
||||
bool allow_crs;
|
||||
u32 reg;
|
||||
int ret;
|
||||
|
@ -940,16 +949,22 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
|
|||
/* Program the data strobe */
|
||||
advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
|
||||
|
||||
/* Clear PIO DONE ISR and start the transfer */
|
||||
advk_writel(pcie, 1, PIO_ISR);
|
||||
advk_writel(pcie, 1, PIO_START);
|
||||
retry_count = 0;
|
||||
do {
|
||||
/* Clear PIO DONE ISR and start the transfer */
|
||||
advk_writel(pcie, 1, PIO_ISR);
|
||||
advk_writel(pcie, 1, PIO_START);
|
||||
|
||||
ret = advk_pcie_wait_pio(pcie);
|
||||
if (ret < 0)
|
||||
goto try_crs;
|
||||
ret = advk_pcie_wait_pio(pcie);
|
||||
if (ret < 0)
|
||||
goto try_crs;
|
||||
|
||||
retry_count += ret;
|
||||
|
||||
/* Check PIO status and get the read result */
|
||||
ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
|
||||
} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
|
||||
|
||||
/* Check PIO status and get the read result */
|
||||
ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
|
||||
if (ret < 0)
|
||||
goto fail;
|
||||
|
||||
|
@ -981,6 +996,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|||
struct advk_pcie *pcie = bus->sysdata;
|
||||
u32 reg;
|
||||
u32 data_strobe = 0x0;
|
||||
int retry_count;
|
||||
int offset;
|
||||
int ret;
|
||||
|
||||
|
@ -1022,19 +1038,22 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
|
|||
/* Program the data strobe */
|
||||
advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
|
||||
|
||||
/* Clear PIO DONE ISR and start the transfer */
|
||||
advk_writel(pcie, 1, PIO_ISR);
|
||||
advk_writel(pcie, 1, PIO_START);
|
||||
retry_count = 0;
|
||||
do {
|
||||
/* Clear PIO DONE ISR and start the transfer */
|
||||
advk_writel(pcie, 1, PIO_ISR);
|
||||
advk_writel(pcie, 1, PIO_START);
|
||||
|
||||
ret = advk_pcie_wait_pio(pcie);
|
||||
if (ret < 0)
|
||||
return PCIBIOS_SET_FAILED;
|
||||
ret = advk_pcie_wait_pio(pcie);
|
||||
if (ret < 0)
|
||||
return PCIBIOS_SET_FAILED;
|
||||
|
||||
ret = advk_pcie_check_pio_status(pcie, false, NULL);
|
||||
if (ret < 0)
|
||||
return PCIBIOS_SET_FAILED;
|
||||
retry_count += ret;
|
||||
|
||||
return PCIBIOS_SUCCESSFUL;
|
||||
ret = advk_pcie_check_pio_status(pcie, false, NULL);
|
||||
} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
|
||||
|
||||
return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
|
||||
}
|
||||
|
||||
static struct pci_ops advk_pcie_ops = {
|
||||
|
|
Загрузка…
Ссылка в новой задаче