iio: potentiometer: add driver for Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X
The following functionalities are supported: - write, read from volatile memory Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdf Signed-off-by: Slawomir Stepien <sst@poczta.fm> Reviewed-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: Jonathan Cameron <jic23@kernel.org>
This commit is contained in:
Slawomir Stepien
Jonathan Cameron
Родитель
6154a108fa
Коммит
22d199a539
|
|
@ -0,0 +1,84 @@
|
|||
* Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer
|
||||
driver
|
||||
|
||||
The node for this driver must be a child node of a SPI controller, hence
|
||||
all mandatory properties described in
|
||||
|
||||
Documentation/devicetree/bindings/spi/spi-bus.txt
|
||||
|
||||
must be specified.
|
||||
|
||||
Required properties:
|
||||
- compatible: Must be one of the following, depending on the
|
||||
model:
|
||||
"microchip,mcp4131-502"
|
||||
"microchip,mcp4131-103"
|
||||
"microchip,mcp4131-503"
|
||||
"microchip,mcp4131-104"
|
||||
"microchip,mcp4132-502"
|
||||
"microchip,mcp4132-103"
|
||||
"microchip,mcp4132-503"
|
||||
"microchip,mcp4132-104"
|
||||
"microchip,mcp4141-502"
|
||||
"microchip,mcp4141-103"
|
||||
"microchip,mcp4141-503"
|
||||
"microchip,mcp4141-104"
|
||||
"microchip,mcp4142-502"
|
||||
"microchip,mcp4142-103"
|
||||
"microchip,mcp4142-503"
|
||||
"microchip,mcp4142-104"
|
||||
"microchip,mcp4151-502"
|
||||
"microchip,mcp4151-103"
|
||||
"microchip,mcp4151-503"
|
||||
"microchip,mcp4151-104"
|
||||
"microchip,mcp4152-502"
|
||||
"microchip,mcp4152-103"
|
||||
"microchip,mcp4152-503"
|
||||
"microchip,mcp4152-104"
|
||||
"microchip,mcp4161-502"
|
||||
"microchip,mcp4161-103"
|
||||
"microchip,mcp4161-503"
|
||||
"microchip,mcp4161-104"
|
||||
"microchip,mcp4162-502"
|
||||
"microchip,mcp4162-103"
|
||||
"microchip,mcp4162-503"
|
||||
"microchip,mcp4162-104"
|
||||
"microchip,mcp4231-502"
|
||||
"microchip,mcp4231-103"
|
||||
"microchip,mcp4231-503"
|
||||
"microchip,mcp4231-104"
|
||||
"microchip,mcp4232-502"
|
||||
"microchip,mcp4232-103"
|
||||
"microchip,mcp4232-503"
|
||||
"microchip,mcp4232-104"
|
||||
"microchip,mcp4241-502"
|
||||
"microchip,mcp4241-103"
|
||||
"microchip,mcp4241-503"
|
||||
"microchip,mcp4241-104"
|
||||
"microchip,mcp4242-502"
|
||||
"microchip,mcp4242-103"
|
||||
"microchip,mcp4242-503"
|
||||
"microchip,mcp4242-104"
|
||||
"microchip,mcp4251-502"
|
||||
"microchip,mcp4251-103"
|
||||
"microchip,mcp4251-503"
|
||||
"microchip,mcp4251-104"
|
||||
"microchip,mcp4252-502"
|
||||
"microchip,mcp4252-103"
|
||||
"microchip,mcp4252-503"
|
||||
"microchip,mcp4252-104"
|
||||
"microchip,mcp4261-502"
|
||||
"microchip,mcp4261-103"
|
||||
"microchip,mcp4261-503"
|
||||
"microchip,mcp4261-104"
|
||||
"microchip,mcp4262-502"
|
||||
"microchip,mcp4262-103"
|
||||
"microchip,mcp4262-503"
|
||||
"microchip,mcp4262-104"
|
||||
|
||||
Example:
|
||||
mcp4131: mcp4131@0 {
|
||||
compatible = "mcp4131-502";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <500000>;
|
||||
};
|
||||
|
|
@ -5,6 +5,24 @@
|
|||
|
||||
menu "Digital potentiometers"
|
||||
|
||||
config MCP4131
|
||||
tristate "Microchip MCP413X/414X/415X/416X/423X/424X/425X/426X Digital Potentiometer driver"
|
||||
depends on SPI
|
||||
help
|
||||
Say yes here to build support for the Microchip
|
||||
MCP4131, MCP4132,
|
||||
MCP4141, MCP4142,
|
||||
MCP4151, MCP4152,
|
||||
MCP4161, MCP4162,
|
||||
MCP4231, MCP4232,
|
||||
MCP4241, MCP4242,
|
||||
MCP4251, MCP4252,
|
||||
MCP4261, MCP4262,
|
||||
digital potentiomenter chips.
|
||||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called mcp4131.
|
||||
|
||||
config MCP4531
|
||||
tristate "Microchip MCP45xx/MCP46xx Digital Potentiometer driver"
|
||||
depends on I2C
|
||||
|
|
|
|||
|
|
@ -3,5 +3,6 @@
|
|||
#
|
||||
|
||||
# When adding new entries keep the list in alphabetical order
|
||||
obj-$(CONFIG_MCP4131) += mcp4131.o
|
||||
obj-$(CONFIG_MCP4531) += mcp4531.o
|
||||
obj-$(CONFIG_TPL0102) += tpl0102.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,494 @@
|
|||
/*
|
||||
* Industrial I/O driver for Microchip digital potentiometers
|
||||
*
|
||||
* Copyright (c) 2016 Slawomir Stepien
|
||||
* Based on: Peter Rosin's code from mcp4531.c
|
||||
*
|
||||
* Datasheet: http://ww1.microchip.com/downloads/en/DeviceDoc/22060b.pdf
|
||||
*
|
||||
* DEVID #Wipers #Positions Resistor Opts (kOhm)
|
||||
* mcp4131 1 129 5, 10, 50, 100
|
||||
* mcp4132 1 129 5, 10, 50, 100
|
||||
* mcp4141 1 129 5, 10, 50, 100
|
||||
* mcp4142 1 129 5, 10, 50, 100
|
||||
* mcp4151 1 257 5, 10, 50, 100
|
||||
* mcp4152 1 257 5, 10, 50, 100
|
||||
* mcp4161 1 257 5, 10, 50, 100
|
||||
* mcp4162 1 257 5, 10, 50, 100
|
||||
* mcp4231 2 129 5, 10, 50, 100
|
||||
* mcp4232 2 129 5, 10, 50, 100
|
||||
* mcp4241 2 129 5, 10, 50, 100
|
||||
* mcp4242 2 129 5, 10, 50, 100
|
||||
* mcp4251 2 257 5, 10, 50, 100
|
||||
* mcp4252 2 257 5, 10, 50, 100
|
||||
* mcp4261 2 257 5, 10, 50, 100
|
||||
* mcp4262 2 257 5, 10, 50, 100
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License version 2 as published by
|
||||
* the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/*
|
||||
* TODO:
|
||||
* 1. Write wiper setting to EEPROM for EEPROM capable models.
|
||||
*/
|
||||
|
||||
#include <linux/cache.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/export.h>
|
||||
#include <linux/iio/iio.h>
|
||||
#include <linux/iio/types.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/mutex.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/spi/spi.h>
|
||||
|
||||
#define MCP4131_WRITE (0x00 << 2)
|
||||
#define MCP4131_READ (0x03 << 2)
|
||||
|
||||
#define MCP4131_WIPER_SHIFT 4
|
||||
#define MCP4131_CMDERR(r) ((r[0]) & 0x02)
|
||||
#define MCP4131_RAW(r) ((r[0]) == 0xff ? 0x100 : (r[1]))
|
||||
|
||||
struct mcp4131_cfg {
|
||||
int wipers;
|
||||
int max_pos;
|
||||
int kohms;
|
||||
};
|
||||
|
||||
enum mcp4131_type {
|
||||
MCP413x_502 = 0,
|
||||
MCP413x_103,
|
||||
MCP413x_503,
|
||||
MCP413x_104,
|
||||
MCP414x_502,
|
||||
MCP414x_103,
|
||||
MCP414x_503,
|
||||
MCP414x_104,
|
||||
MCP415x_502,
|
||||
MCP415x_103,
|
||||
MCP415x_503,
|
||||
MCP415x_104,
|
||||
MCP416x_502,
|
||||
MCP416x_103,
|
||||
MCP416x_503,
|
||||
MCP416x_104,
|
||||
MCP423x_502,
|
||||
MCP423x_103,
|
||||
MCP423x_503,
|
||||
MCP423x_104,
|
||||
MCP424x_502,
|
||||
MCP424x_103,
|
||||
MCP424x_503,
|
||||
MCP424x_104,
|
||||
MCP425x_502,
|
||||
MCP425x_103,
|
||||
MCP425x_503,
|
||||
MCP425x_104,
|
||||
MCP426x_502,
|
||||
MCP426x_103,
|
||||
MCP426x_503,
|
||||
MCP426x_104,
|
||||
};
|
||||
|
||||
static const struct mcp4131_cfg mcp4131_cfg[] = {
|
||||
[MCP413x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
|
||||
[MCP413x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
|
||||
[MCP413x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
|
||||
[MCP413x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
|
||||
[MCP414x_502] = { .wipers = 1, .max_pos = 128, .kohms = 5, },
|
||||
[MCP414x_103] = { .wipers = 1, .max_pos = 128, .kohms = 10, },
|
||||
[MCP414x_503] = { .wipers = 1, .max_pos = 128, .kohms = 50, },
|
||||
[MCP414x_104] = { .wipers = 1, .max_pos = 128, .kohms = 100, },
|
||||
[MCP415x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
|
||||
[MCP415x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
|
||||
[MCP415x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
|
||||
[MCP415x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
|
||||
[MCP416x_502] = { .wipers = 1, .max_pos = 256, .kohms = 5, },
|
||||
[MCP416x_103] = { .wipers = 1, .max_pos = 256, .kohms = 10, },
|
||||
[MCP416x_503] = { .wipers = 1, .max_pos = 256, .kohms = 50, },
|
||||
[MCP416x_104] = { .wipers = 1, .max_pos = 256, .kohms = 100, },
|
||||
[MCP423x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
|
||||
[MCP423x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
|
||||
[MCP423x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
|
||||
[MCP423x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
|
||||
[MCP424x_502] = { .wipers = 2, .max_pos = 128, .kohms = 5, },
|
||||
[MCP424x_103] = { .wipers = 2, .max_pos = 128, .kohms = 10, },
|
||||
[MCP424x_503] = { .wipers = 2, .max_pos = 128, .kohms = 50, },
|
||||
[MCP424x_104] = { .wipers = 2, .max_pos = 128, .kohms = 100, },
|
||||
[MCP425x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
|
||||
[MCP425x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
|
||||
[MCP425x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
|
||||
[MCP425x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
|
||||
[MCP426x_502] = { .wipers = 2, .max_pos = 256, .kohms = 5, },
|
||||
[MCP426x_103] = { .wipers = 2, .max_pos = 256, .kohms = 10, },
|
||||
[MCP426x_503] = { .wipers = 2, .max_pos = 256, .kohms = 50, },
|
||||
[MCP426x_104] = { .wipers = 2, .max_pos = 256, .kohms = 100, },
|
||||
};
|
||||
|
||||
struct mcp4131_data {
|
||||
struct spi_device *spi;
|
||||
const struct mcp4131_cfg *cfg;
|
||||
struct mutex lock;
|
||||
u8 buf[2] ____cacheline_aligned;
|
||||
};
|
||||
|
||||
#define MCP4131_CHANNEL(ch) { \
|
||||
.type = IIO_RESISTANCE, \
|
||||
.indexed = 1, \
|
||||
.output = 1, \
|
||||
.channel = (ch), \
|
||||
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
||||
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
||||
}
|
||||
|
||||
static const struct iio_chan_spec mcp4131_channels[] = {
|
||||
MCP4131_CHANNEL(0),
|
||||
MCP4131_CHANNEL(1),
|
||||
};
|
||||
|
||||
static int mcp4131_read(struct spi_device *spi, void *buf, size_t len)
|
||||
{
|
||||
struct spi_transfer t = {
|
||||
.tx_buf = buf, /* We need to send addr, cmd and 12 bits */
|
||||
.rx_buf = buf,
|
||||
.len = len,
|
||||
};
|
||||
struct spi_message m;
|
||||
|
||||
spi_message_init(&m);
|
||||
spi_message_add_tail(&t, &m);
|
||||
|
||||
return spi_sync(spi, &m);
|
||||
}
|
||||
|
||||
static int mcp4131_read_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int *val, int *val2, long mask)
|
||||
{
|
||||
int err;
|
||||
struct mcp4131_data *data = iio_priv(indio_dev);
|
||||
int address = chan->channel;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
mutex_lock(&data->lock);
|
||||
|
||||
data->buf[0] = (address << MCP4131_WIPER_SHIFT) | MCP4131_READ;
|
||||
data->buf[1] = 0;
|
||||
|
||||
err = mcp4131_read(data->spi, data->buf, 2);
|
||||
if (err) {
|
||||
mutex_unlock(&data->lock);
|
||||
return err;
|
||||
}
|
||||
|
||||
/* Error, bad address/command combination */
|
||||
if (!MCP4131_CMDERR(data->buf)) {
|
||||
mutex_unlock(&data->lock);
|
||||
return -EIO;
|
||||
}
|
||||
|
||||
*val = MCP4131_RAW(data->buf);
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
return IIO_VAL_INT;
|
||||
|
||||
case IIO_CHAN_INFO_SCALE:
|
||||
*val = 1000 * data->cfg->kohms;
|
||||
*val2 = data->cfg->max_pos;
|
||||
return IIO_VAL_FRACTIONAL;
|
||||
}
|
||||
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
static int mcp4131_write_raw(struct iio_dev *indio_dev,
|
||||
struct iio_chan_spec const *chan,
|
||||
int val, int val2, long mask)
|
||||
{
|
||||
int err;
|
||||
struct mcp4131_data *data = iio_priv(indio_dev);
|
||||
int address = chan->channel << MCP4131_WIPER_SHIFT;
|
||||
|
||||
switch (mask) {
|
||||
case IIO_CHAN_INFO_RAW:
|
||||
if (val > data->cfg->max_pos || val < 0)
|
||||
return -EINVAL;
|
||||
break;
|
||||
|
||||
default:
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mutex_lock(&data->lock);
|
||||
|
||||
data->buf[0] = address << MCP4131_WIPER_SHIFT;
|
||||
data->buf[0] |= MCP4131_WRITE | (val >> 8);
|
||||
data->buf[1] = val & 0xFF; /* 8 bits here */
|
||||
|
||||
err = spi_write(data->spi, data->buf, 2);
|
||||
mutex_unlock(&data->lock);
|
||||
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct iio_info mcp4131_info = {
|
||||
.read_raw = mcp4131_read_raw,
|
||||
.write_raw = mcp4131_write_raw,
|
||||
.driver_module = THIS_MODULE,
|
||||
};
|
||||
|
||||
static int mcp4131_probe(struct spi_device *spi)
|
||||
{
|
||||
int err;
|
||||
struct device *dev = &spi->dev;
|
||||
unsigned long devid = spi_get_device_id(spi)->driver_data;
|
||||
struct mcp4131_data *data;
|
||||
struct iio_dev *indio_dev;
|
||||
|
||||
indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
|
||||
if (!indio_dev)
|
||||
return -ENOMEM;
|
||||
|
||||
data = iio_priv(indio_dev);
|
||||
spi_set_drvdata(spi, indio_dev);
|
||||
data->spi = spi;
|
||||
data->cfg = &mcp4131_cfg[devid];
|
||||
|
||||
mutex_init(&data->lock);
|
||||
|
||||
indio_dev->dev.parent = dev;
|
||||
indio_dev->info = &mcp4131_info;
|
||||
indio_dev->channels = mcp4131_channels;
|
||||
indio_dev->num_channels = data->cfg->wipers;
|
||||
indio_dev->name = spi_get_device_id(spi)->name;
|
||||
|
||||
err = devm_iio_device_register(dev, indio_dev);
|
||||
if (err) {
|
||||
dev_info(&spi->dev, "Unable to register %s\n", indio_dev->name);
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#if defined(CONFIG_OF)
|
||||
static const struct of_device_id mcp4131_dt_ids[] = {
|
||||
{ .compatible = "microchip,mcp4131-502",
|
||||
.data = &mcp4131_cfg[MCP413x_502] },
|
||||
{ .compatible = "microchip,mcp4131-103",
|
||||
.data = &mcp4131_cfg[MCP413x_103] },
|
||||
{ .compatible = "microchip,mcp4131-503",
|
||||
.data = &mcp4131_cfg[MCP413x_503] },
|
||||
{ .compatible = "microchip,mcp4131-104",
|
||||
.data = &mcp4131_cfg[MCP413x_104] },
|
||||
{ .compatible = "microchip,mcp4132-502",
|
||||
.data = &mcp4131_cfg[MCP413x_502] },
|
||||
{ .compatible = "microchip,mcp4132-103",
|
||||
.data = &mcp4131_cfg[MCP413x_103] },
|
||||
{ .compatible = "microchip,mcp4132-503",
|
||||
.data = &mcp4131_cfg[MCP413x_503] },
|
||||
{ .compatible = "microchip,mcp4132-104",
|
||||
.data = &mcp4131_cfg[MCP413x_104] },
|
||||
{ .compatible = "microchip,mcp4141-502",
|
||||
.data = &mcp4131_cfg[MCP414x_502] },
|
||||
{ .compatible = "microchip,mcp4141-103",
|
||||
.data = &mcp4131_cfg[MCP414x_103] },
|
||||
{ .compatible = "microchip,mcp4141-503",
|
||||
.data = &mcp4131_cfg[MCP414x_503] },
|
||||
{ .compatible = "microchip,mcp4141-104",
|
||||
.data = &mcp4131_cfg[MCP414x_104] },
|
||||
{ .compatible = "microchip,mcp4142-502",
|
||||
.data = &mcp4131_cfg[MCP414x_502] },
|
||||
{ .compatible = "microchip,mcp4142-103",
|
||||
.data = &mcp4131_cfg[MCP414x_103] },
|
||||
{ .compatible = "microchip,mcp4142-503",
|
||||
.data = &mcp4131_cfg[MCP414x_503] },
|
||||
{ .compatible = "microchip,mcp4142-104",
|
||||
.data = &mcp4131_cfg[MCP414x_104] },
|
||||
{ .compatible = "microchip,mcp4151-502",
|
||||
.data = &mcp4131_cfg[MCP415x_502] },
|
||||
{ .compatible = "microchip,mcp4151-103",
|
||||
.data = &mcp4131_cfg[MCP415x_103] },
|
||||
{ .compatible = "microchip,mcp4151-503",
|
||||
.data = &mcp4131_cfg[MCP415x_503] },
|
||||
{ .compatible = "microchip,mcp4151-104",
|
||||
.data = &mcp4131_cfg[MCP415x_104] },
|
||||
{ .compatible = "microchip,mcp4152-502",
|
||||
.data = &mcp4131_cfg[MCP415x_502] },
|
||||
{ .compatible = "microchip,mcp4152-103",
|
||||
.data = &mcp4131_cfg[MCP415x_103] },
|
||||
{ .compatible = "microchip,mcp4152-503",
|
||||
.data = &mcp4131_cfg[MCP415x_503] },
|
||||
{ .compatible = "microchip,mcp4152-104",
|
||||
.data = &mcp4131_cfg[MCP415x_104] },
|
||||
{ .compatible = "microchip,mcp4161-502",
|
||||
.data = &mcp4131_cfg[MCP416x_502] },
|
||||
{ .compatible = "microchip,mcp4161-103",
|
||||
.data = &mcp4131_cfg[MCP416x_103] },
|
||||
{ .compatible = "microchip,mcp4161-503",
|
||||
.data = &mcp4131_cfg[MCP416x_503] },
|
||||
{ .compatible = "microchip,mcp4161-104",
|
||||
.data = &mcp4131_cfg[MCP416x_104] },
|
||||
{ .compatible = "microchip,mcp4162-502",
|
||||
.data = &mcp4131_cfg[MCP416x_502] },
|
||||
{ .compatible = "microchip,mcp4162-103",
|
||||
.data = &mcp4131_cfg[MCP416x_103] },
|
||||
{ .compatible = "microchip,mcp4162-503",
|
||||
.data = &mcp4131_cfg[MCP416x_503] },
|
||||
{ .compatible = "microchip,mcp4162-104",
|
||||
.data = &mcp4131_cfg[MCP416x_104] },
|
||||
{ .compatible = "microchip,mcp4231-502",
|
||||
.data = &mcp4131_cfg[MCP423x_502] },
|
||||
{ .compatible = "microchip,mcp4231-103",
|
||||
.data = &mcp4131_cfg[MCP423x_103] },
|
||||
{ .compatible = "microchip,mcp4231-503",
|
||||
.data = &mcp4131_cfg[MCP423x_503] },
|
||||
{ .compatible = "microchip,mcp4231-104",
|
||||
.data = &mcp4131_cfg[MCP423x_104] },
|
||||
{ .compatible = "microchip,mcp4232-502",
|
||||
.data = &mcp4131_cfg[MCP423x_502] },
|
||||
{ .compatible = "microchip,mcp4232-103",
|
||||
.data = &mcp4131_cfg[MCP423x_103] },
|
||||
{ .compatible = "microchip,mcp4232-503",
|
||||
.data = &mcp4131_cfg[MCP423x_503] },
|
||||
{ .compatible = "microchip,mcp4232-104",
|
||||
.data = &mcp4131_cfg[MCP423x_104] },
|
||||
{ .compatible = "microchip,mcp4241-502",
|
||||
.data = &mcp4131_cfg[MCP424x_502] },
|
||||
{ .compatible = "microchip,mcp4241-103",
|
||||
.data = &mcp4131_cfg[MCP424x_103] },
|
||||
{ .compatible = "microchip,mcp4241-503",
|
||||
.data = &mcp4131_cfg[MCP424x_503] },
|
||||
{ .compatible = "microchip,mcp4241-104",
|
||||
.data = &mcp4131_cfg[MCP424x_104] },
|
||||
{ .compatible = "microchip,mcp4242-502",
|
||||
.data = &mcp4131_cfg[MCP424x_502] },
|
||||
{ .compatible = "microchip,mcp4242-103",
|
||||
.data = &mcp4131_cfg[MCP424x_103] },
|
||||
{ .compatible = "microchip,mcp4242-503",
|
||||
.data = &mcp4131_cfg[MCP424x_503] },
|
||||
{ .compatible = "microchip,mcp4242-104",
|
||||
.data = &mcp4131_cfg[MCP424x_104] },
|
||||
{ .compatible = "microchip,mcp4251-502",
|
||||
.data = &mcp4131_cfg[MCP425x_502] },
|
||||
{ .compatible = "microchip,mcp4251-103",
|
||||
.data = &mcp4131_cfg[MCP425x_103] },
|
||||
{ .compatible = "microchip,mcp4251-503",
|
||||
.data = &mcp4131_cfg[MCP425x_503] },
|
||||
{ .compatible = "microchip,mcp4251-104",
|
||||
.data = &mcp4131_cfg[MCP425x_104] },
|
||||
{ .compatible = "microchip,mcp4252-502",
|
||||
.data = &mcp4131_cfg[MCP425x_502] },
|
||||
{ .compatible = "microchip,mcp4252-103",
|
||||
.data = &mcp4131_cfg[MCP425x_103] },
|
||||
{ .compatible = "microchip,mcp4252-503",
|
||||
.data = &mcp4131_cfg[MCP425x_503] },
|
||||
{ .compatible = "microchip,mcp4252-104",
|
||||
.data = &mcp4131_cfg[MCP425x_104] },
|
||||
{ .compatible = "microchip,mcp4261-502",
|
||||
.data = &mcp4131_cfg[MCP426x_502] },
|
||||
{ .compatible = "microchip,mcp4261-103",
|
||||
.data = &mcp4131_cfg[MCP426x_103] },
|
||||
{ .compatible = "microchip,mcp4261-503",
|
||||
.data = &mcp4131_cfg[MCP426x_503] },
|
||||
{ .compatible = "microchip,mcp4261-104",
|
||||
.data = &mcp4131_cfg[MCP426x_104] },
|
||||
{ .compatible = "microchip,mcp4262-502",
|
||||
.data = &mcp4131_cfg[MCP426x_502] },
|
||||
{ .compatible = "microchip,mcp4262-103",
|
||||
.data = &mcp4131_cfg[MCP426x_103] },
|
||||
{ .compatible = "microchip,mcp4262-503",
|
||||
.data = &mcp4131_cfg[MCP426x_503] },
|
||||
{ .compatible = "microchip,mcp4262-104",
|
||||
.data = &mcp4131_cfg[MCP426x_104] },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, mcp4131_dt_ids);
|
||||
#endif /* CONFIG_OF */
|
||||
|
||||
static const struct spi_device_id mcp4131_id[] = {
|
||||
{ "mcp4131-502", MCP413x_502 },
|
||||
{ "mcp4131-103", MCP413x_103 },
|
||||
{ "mcp4131-503", MCP413x_503 },
|
||||
{ "mcp4131-104", MCP413x_104 },
|
||||
{ "mcp4132-502", MCP413x_502 },
|
||||
{ "mcp4132-103", MCP413x_103 },
|
||||
{ "mcp4132-503", MCP413x_503 },
|
||||
{ "mcp4132-104", MCP413x_104 },
|
||||
{ "mcp4141-502", MCP414x_502 },
|
||||
{ "mcp4141-103", MCP414x_103 },
|
||||
{ "mcp4141-503", MCP414x_503 },
|
||||
{ "mcp4141-104", MCP414x_104 },
|
||||
{ "mcp4142-502", MCP414x_502 },
|
||||
{ "mcp4142-103", MCP414x_103 },
|
||||
{ "mcp4142-503", MCP414x_503 },
|
||||
{ "mcp4142-104", MCP414x_104 },
|
||||
{ "mcp4151-502", MCP415x_502 },
|
||||
{ "mcp4151-103", MCP415x_103 },
|
||||
{ "mcp4151-503", MCP415x_503 },
|
||||
{ "mcp4151-104", MCP415x_104 },
|
||||
{ "mcp4152-502", MCP415x_502 },
|
||||
{ "mcp4152-103", MCP415x_103 },
|
||||
{ "mcp4152-503", MCP415x_503 },
|
||||
{ "mcp4152-104", MCP415x_104 },
|
||||
{ "mcp4161-502", MCP416x_502 },
|
||||
{ "mcp4161-103", MCP416x_103 },
|
||||
{ "mcp4161-503", MCP416x_503 },
|
||||
{ "mcp4161-104", MCP416x_104 },
|
||||
{ "mcp4162-502", MCP416x_502 },
|
||||
{ "mcp4162-103", MCP416x_103 },
|
||||
{ "mcp4162-503", MCP416x_503 },
|
||||
{ "mcp4162-104", MCP416x_104 },
|
||||
{ "mcp4231-502", MCP423x_502 },
|
||||
{ "mcp4231-103", MCP423x_103 },
|
||||
{ "mcp4231-503", MCP423x_503 },
|
||||
{ "mcp4231-104", MCP423x_104 },
|
||||
{ "mcp4232-502", MCP423x_502 },
|
||||
{ "mcp4232-103", MCP423x_103 },
|
||||
{ "mcp4232-503", MCP423x_503 },
|
||||
{ "mcp4232-104", MCP423x_104 },
|
||||
{ "mcp4241-502", MCP424x_502 },
|
||||
{ "mcp4241-103", MCP424x_103 },
|
||||
{ "mcp4241-503", MCP424x_503 },
|
||||
{ "mcp4241-104", MCP424x_104 },
|
||||
{ "mcp4242-502", MCP424x_502 },
|
||||
{ "mcp4242-103", MCP424x_103 },
|
||||
{ "mcp4242-503", MCP424x_503 },
|
||||
{ "mcp4242-104", MCP424x_104 },
|
||||
{ "mcp4251-502", MCP425x_502 },
|
||||
{ "mcp4251-103", MCP425x_103 },
|
||||
{ "mcp4251-503", MCP425x_503 },
|
||||
{ "mcp4251-104", MCP425x_104 },
|
||||
{ "mcp4252-502", MCP425x_502 },
|
||||
{ "mcp4252-103", MCP425x_103 },
|
||||
{ "mcp4252-503", MCP425x_503 },
|
||||
{ "mcp4252-104", MCP425x_104 },
|
||||
{ "mcp4261-502", MCP426x_502 },
|
||||
{ "mcp4261-103", MCP426x_103 },
|
||||
{ "mcp4261-503", MCP426x_503 },
|
||||
{ "mcp4261-104", MCP426x_104 },
|
||||
{ "mcp4262-502", MCP426x_502 },
|
||||
{ "mcp4262-103", MCP426x_103 },
|
||||
{ "mcp4262-503", MCP426x_503 },
|
||||
{ "mcp4262-104", MCP426x_104 },
|
||||
{}
|
||||
};
|
||||
MODULE_DEVICE_TABLE(spi, mcp4131_id);
|
||||
|
||||
static struct spi_driver mcp4131_driver = {
|
||||
.driver = {
|
||||
.name = "mcp4131",
|
||||
.of_match_table = of_match_ptr(mcp4131_dt_ids),
|
||||
},
|
||||
.probe = mcp4131_probe,
|
||||
.id_table = mcp4131_id,
|
||||
};
|
||||
|
||||
module_spi_driver(mcp4131_driver);
|
||||
|
||||
MODULE_AUTHOR("Slawomir Stepien <sst@poczta.fm>");
|
||||
MODULE_DESCRIPTION("MCP4131 digital potentiometer");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
Загрузка…
Ссылка в новой задаче