spi: Add s3c64xx SPI Controller driver
Each SPI controller has exactly one CS line and as such doesn't provide for multi-cs. We implement a workaround to support multi-cs by _not_ configuring the mux'ed CS pin for each SPI controller. The CS mechanism is assumed to be fully machine specific - the driver doesn't even assume some GPIO pin is used to control the CS. The driver selects between DMA and POLLING mode depending upon the xfer size - DMA mode for xfers bigger than FIFO size, POLLING mode otherwise. The driver has been designed to be capable of running SoCs since s3c64xx and till date, for that reason some of the register fields have been passed via, SoC specific, platform data. Signed-off-by: Jassi Brar <jassi.brar@samsung.com> Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
This commit is contained in:
Родитель
6aed4ee9b4
Коммит
230d42d422
|
@ -240,6 +240,13 @@ config SPI_S3C24XX_GPIO
|
|||
the inbuilt hardware cannot provide the transfer mode, or
|
||||
where the board is using non hardware connected pins.
|
||||
|
||||
config SPI_S3C64XX
|
||||
tristate "Samsung S3C64XX series type SPI"
|
||||
depends on ARCH_S3C64XX && EXPERIMENTAL
|
||||
select S3C64XX_DMA
|
||||
help
|
||||
SPI driver for Samsung S3C64XX and newer SoCs.
|
||||
|
||||
config SPI_SH_MSIOF
|
||||
tristate "SuperH MSIOF SPI controller"
|
||||
depends on SUPERH && HAVE_CLK
|
||||
|
|
|
@ -33,6 +33,7 @@ obj-$(CONFIG_SPI_MPC8xxx) += spi_mpc8xxx.o
|
|||
obj-$(CONFIG_SPI_PPC4xx) += spi_ppc4xx.o
|
||||
obj-$(CONFIG_SPI_S3C24XX_GPIO) += spi_s3c24xx_gpio.o
|
||||
obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24xx_hw.o
|
||||
obj-$(CONFIG_SPI_S3C64XX) += spi_s3c64xx.o
|
||||
obj-$(CONFIG_SPI_TXX9) += spi_txx9.o
|
||||
obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o
|
||||
obj-$(CONFIG_SPI_XILINX_OF) += xilinx_spi_of.o
|
||||
|
|
Разница между файлами не показана из-за своего большого размера
Загрузить разницу
Загрузка…
Ссылка в новой задаче