diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig
index f2f71c20093f..4191ae08f4c8 100644
--- a/arch/arm/mach-omap2/Kconfig
+++ b/arch/arm/mach-omap2/Kconfig
@@ -192,12 +192,6 @@ config MACH_OMAP2_TUSB6010
 	depends on ARCH_OMAP2 && SOC_OMAP2420
 	default y if MACH_NOKIA_N8X0
 
-config MACH_OMAP_2430SDP
-	bool "OMAP 2430 SDP board"
-	depends on SOC_OMAP2430
-	default y
-	select OMAP_PACKAGE_ZAC
-
 config MACH_OMAP3_BEAGLE
 	bool "OMAP3 BEAGLE board"
 	depends on ARCH_OMAP3
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 15bd1db73a26..e0b5429f7e5f 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -237,7 +237,6 @@ obj-$(CONFIG_SOC_OMAP2420)		+= msdi.o
 
 # Specific board support
 obj-$(CONFIG_MACH_OMAP_GENERIC)		+= board-generic.o pdata-quirks.o
-obj-$(CONFIG_MACH_OMAP_2430SDP)		+= board-2430sdp.o
 obj-$(CONFIG_MACH_OMAP3_BEAGLE)		+= board-omap3beagle.o
 obj-$(CONFIG_MACH_DEVKIT8000)     	+= board-devkit8000.o
 obj-$(CONFIG_MACH_OMAP_LDP)		+= board-ldp.o
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
deleted file mode 100644
index c711ad6ac067..000000000000
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ /dev/null
@@ -1,273 +0,0 @@
-/*
- * linux/arch/arm/mach-omap2/board-2430sdp.c
- *
- * Copyright (C) 2006 Texas Instruments
- *
- * Modified from mach-omap2/board-generic.c
- *
- * Initial Code : Based on a patch from Komal Shah and Richard Woodruff
- * Updated the Code for 2430 SDP : Syed Mohammed Khasim
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/physmap.h>
-#include <linux/mmc/host.h>
-#include <linux/delay.h>
-#include <linux/i2c/twl.h>
-#include <linux/regulator/machine.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/usb/phy.h>
-
-#include <asm/mach-types.h>
-#include <asm/mach/arch.h>
-#include <asm/mach/map.h>
-
-#include "common.h"
-#include "gpmc.h"
-#include "gpmc-smc91x.h"
-
-#include <video/omapdss.h>
-#include <video/omap-panel-data.h>
-
-#include "mux.h"
-#include "hsmmc.h"
-#include "common-board-devices.h"
-
-#define SDP2430_CS0_BASE	0x04000000
-#define SECONDARY_LCD_GPIO		147
-
-static struct mtd_partition sdp2430_partitions[] = {
-	/* bootloader (U-Boot, etc) in first sector */
-	{
-		.name		= "bootloader",
-		.offset		= 0,
-		.size		= SZ_256K,
-		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
-	 },
-	/* bootloader params in the next sector */
-	{
-		.name		= "params",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_128K,
-		.mask_flags	= 0,
-	 },
-	/* kernel */
-	{
-		.name		= "kernel",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= SZ_2M,
-		.mask_flags	= 0
-	},
-	/* file system */
-	{
-		.name		= "filesystem",
-		.offset		= MTDPART_OFS_APPEND,
-		.size		= MTDPART_SIZ_FULL,
-		.mask_flags	= 0
-	}
-};
-
-static struct physmap_flash_data sdp2430_flash_data = {
-	.width		= 2,
-	.parts		= sdp2430_partitions,
-	.nr_parts	= ARRAY_SIZE(sdp2430_partitions),
-};
-
-static struct resource sdp2430_flash_resource = {
-	.start		= SDP2430_CS0_BASE,
-	.end		= SDP2430_CS0_BASE + SZ_64M - 1,
-	.flags		= IORESOURCE_MEM,
-};
-
-static struct platform_device sdp2430_flash_device = {
-	.name		= "physmap-flash",
-	.id		= 0,
-	.dev = {
-		.platform_data	= &sdp2430_flash_data,
-	},
-	.num_resources	= 1,
-	.resource	= &sdp2430_flash_resource,
-};
-
-/* LCD */
-#define SDP2430_LCD_PANEL_BACKLIGHT_GPIO	91
-#define SDP2430_LCD_PANEL_ENABLE_GPIO		154
-
-static const struct display_timing sdp2430_lcd_videomode = {
-	.pixelclock	= { 0, 5400000, 0 },
-
-	.hactive = { 0, 240, 0 },
-	.hfront_porch = { 0, 3, 0 },
-	.hback_porch = { 0, 39, 0 },
-	.hsync_len = { 0, 3, 0 },
-
-	.vactive = { 0, 320, 0 },
-	.vfront_porch = { 0, 2, 0 },
-	.vback_porch = { 0, 7, 0 },
-	.vsync_len = { 0, 1, 0 },
-
-	.flags = DISPLAY_FLAGS_HSYNC_LOW | DISPLAY_FLAGS_VSYNC_LOW |
-		DISPLAY_FLAGS_DE_HIGH | DISPLAY_FLAGS_PIXDATA_POSEDGE,
-};
-
-static struct panel_dpi_platform_data sdp2430_lcd_pdata = {
-	.name                   = "lcd",
-	.source                 = "dpi.0",
-
-	.data_lines		= 16,
-
-	.display_timing		= &sdp2430_lcd_videomode,
-
-	.enable_gpio		= SDP2430_LCD_PANEL_ENABLE_GPIO,
-	.backlight_gpio		= SDP2430_LCD_PANEL_BACKLIGHT_GPIO,
-};
-
-static struct platform_device sdp2430_lcd_device = {
-	.name                   = "panel-dpi",
-	.id                     = 0,
-	.dev.platform_data      = &sdp2430_lcd_pdata,
-};
-
-static struct omap_dss_board_info sdp2430_dss_data = {
-	.default_display_name = "lcd",
-};
-
-static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_flash_device,
-	&sdp2430_lcd_device,
-};
-
-#if IS_ENABLED(CONFIG_SMC91X)
-
-static struct omap_smc91x_platform_data board_smc91x_data = {
-	.cs		= 5,
-	.gpio_irq	= 149,
-	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
-				IORESOURCE_IRQ_LOWLEVEL,
-
-};
-
-static void __init board_smc91x_init(void)
-{
-	omap_mux_init_gpio(149, OMAP_PIN_INPUT);
-	gpmc_smc91x_init(&board_smc91x_data);
-}
-
-#else
-
-static inline void board_smc91x_init(void)
-{
-}
-
-#endif
-
-static struct regulator_consumer_supply sdp2430_vmmc1_supplies[] = {
-	REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"),
-};
-
-/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */
-static struct regulator_init_data sdp2430_vmmc1 = {
-	.constraints = {
-		.min_uV			= 1850000,
-		.max_uV			= 3150000,
-		.valid_modes_mask	= REGULATOR_MODE_NORMAL
-					| REGULATOR_MODE_STANDBY,
-		.valid_ops_mask		= REGULATOR_CHANGE_VOLTAGE
-					| REGULATOR_CHANGE_MODE
-					| REGULATOR_CHANGE_STATUS,
-	},
-	.num_consumer_supplies	= ARRAY_SIZE(sdp2430_vmmc1_supplies),
-	.consumer_supplies	= &sdp2430_vmmc1_supplies[0],
-};
-
-static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-};
-
-static struct twl4030_platform_data sdp2430_twldata = {
-	/* platform_data for children goes here */
-	.gpio		= &sdp2430_gpio_data,
-	.vmmc1		= &sdp2430_vmmc1,
-};
-
-static struct i2c_board_info __initdata sdp2430_i2c1_boardinfo[] = {
-	{
-		I2C_BOARD_INFO("isp1301_omap", 0x2D),
-		.flags = I2C_CLIENT_WAKE,
-	},
-};
-
-static int __init omap2430_i2c_init(void)
-{
-	sdp2430_i2c1_boardinfo[0].irq = gpio_to_irq(78);
-	omap_register_i2c_bus(1, 100, sdp2430_i2c1_boardinfo,
-			ARRAY_SIZE(sdp2430_i2c1_boardinfo));
-	omap_pmic_init(2, 100, "twl4030", 7 + OMAP_INTC_START,
-			&sdp2430_twldata);
-	return 0;
-}
-
-static struct omap2_hsmmc_info mmc[] __initdata = {
-	{
-		.mmc		= 1,
-		.caps		= MMC_CAP_4_BIT_DATA,
-		.gpio_cd	= -EINVAL,
-		.gpio_wp	= -EINVAL,
-		.ext_clock	= 1,
-	},
-	{}	/* Terminator */
-};
-
-#ifdef CONFIG_OMAP_MUX
-static struct omap_board_mux board_mux[] __initdata = {
-	{ .reg_offset = OMAP_MUX_TERMINATOR },
-};
-#endif
-
-static void __init omap_2430sdp_init(void)
-{
-	omap2430_mux_init(board_mux, OMAP_PACKAGE_ZAC);
-
-	omap2430_i2c_init();
-
-	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
-	omap_serial_init();
-	omap_sdrc_init(NULL, NULL);
-	omap_hsmmc_init(mmc);
-
-	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP);
-	usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb");
-	usb_musb_init(NULL);
-
-	board_smc91x_init();
-
-	/* Turn off secondary LCD backlight */
-	gpio_request_one(SECONDARY_LCD_GPIO, GPIOF_OUT_INIT_LOW,
-			 "Secondary LCD backlight");
-
-	omap_display_init(&sdp2430_dss_data);
-}
-
-MACHINE_START(OMAP_2430SDP, "OMAP2430 sdp2430 board")
-	/* Maintainer: Syed Khasim - Texas Instruments Inc */
-	.atag_offset	= 0x100,
-	.reserve	= omap_reserve,
-	.map_io		= omap243x_map_io,
-	.init_early	= omap2430_init_early,
-	.init_irq	= omap2_init_irq,
-	.handle_irq	= omap2_intc_handle_irq,
-	.init_machine	= omap_2430sdp_init,
-	.init_late	= omap2430_init_late,
-	.init_time	= omap2_sync32k_timer_init,
-	.restart	= omap2xxx_restart,
-MACHINE_END