microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Staging: bcm: fix CodingStyle warnings/errors reported by checkpatch.pl in led_control.h 

This is a patch to the led_control.h file that fixes numerous warnings
and errors reported by the checkpatch.pl tool. There still remain a few
more, but as this is my first attempt at a commit, I'm not going to be
too adventurous!

Signed-off-by: Gerard Ryan <gerard@ryan.lt>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Gerard Ryan 2012-02-10 01:54:50 +00:00 коммит произвёл Greg Kroah-Hartman
Родитель 073863432f
Коммит 242501ce5d
1 изменённых файлов: 36 добавлений и 38 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

74
drivers/staging/bcm/led_control.h
Просмотреть файл

@ -4,11 +4,11 @@
/*************************TYPE DEF**********************/
#define NUM_OF_LEDS 4
#define DSD_START_OFFSET 0x0200
#define EEPROM_VERSION_OFFSET 0x020E
#define EEPROM_HW_PARAM_POINTER_ADDRESS 0x0218
#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220
#define GPIO_SECTION_START_OFFSET 0x03
#define DSD_START_OFFSET 0x0200
#define EEPROM_VERSION_OFFSET 0x020E
#define EEPROM_HW_PARAM_POINTER_ADDRESS 0x0218
#define EEPROM_HW_PARAM_POINTER_ADDRRES_MAP5 0x0220
#define GPIO_SECTION_START_OFFSET 0x03
#define COMPATIBILITY_SECTION_LENGTH 42
#define COMPATIBILITY_SECTION_LENGTH_MAP5 84
@ -18,27 +18,27 @@
#define EEPROM_MAP5_MINORVERSION 0
#define MAX_NUM_OF_BLINKS 10
#define NUM_OF_GPIO_PINS 16
#define MAX_NUM_OF_BLINKS 10
#define NUM_OF_GPIO_PINS 16
#define DISABLE_GPIO_NUM 0xFF
#define EVENT_SIGNALED 1
#define DISABLE_GPIO_NUM 0xFF
#define EVENT_SIGNALED 1
#define MAX_FILE_NAME_BUFFER_SIZE 100
#define MAX_FILE_NAME_BUFFER_SIZE 100
#define TURN_ON_LED(GPIO, index) do{ \
#define TURN_ON_LED(GPIO, index) do { \
UINT gpio_val = GPIO; \
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG, &gpio_val ,sizeof(gpio_val)) : \
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
}while(0);
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)); \
} while (0);
#define TURN_OFF_LED(GPIO, index) do { \
UINT gpio_val = GPIO; \
(Adapter->LEDInfo.LEDState[index].BitPolarity == 1) ? \
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_CLR_REG,&gpio_val ,sizeof(gpio_val)) : \
wrmaltWithLock(Adapter,BCM_GPIO_OUTPUT_SET_REG,&gpio_val ,sizeof(gpio_val)); \
}while(0);
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_CLR_REG, &gpio_val, sizeof(gpio_val)) : \
wrmaltWithLock(Adapter, BCM_GPIO_OUTPUT_SET_REG, &gpio_val, sizeof(gpio_val)); \
} while (0);
#define B_ULONG32 unsigned long
@ -50,7 +50,7 @@ typedef enum _LEDColors{
BLUE_LED = 2,
YELLOW_LED = 3,
GREEN_LED = 4
} LEDColors; /*Enumerated values of different LED types*/
} LEDColors; /*Enumerated values of different LED types*/
typedef enum LedEvents {
SHUTDOWN_EXIT = 0x00,
@ -62,43 +62,41 @@ typedef enum LedEvents {
LOWPOWER_MODE_ENTER = 0x20,
IDLEMODE_CONTINUE = 0x40,
IDLEMODE_EXIT = 0x80,
LED_THREAD_INACTIVE = 0x100, //Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold.
LED_THREAD_ACTIVE = 0x200 //Makes the LED Thread Active back.
} LedEventInfo_t; /*Enumerated values of different driver states*/
LED_THREAD_INACTIVE = 0x100, /* Makes the LED thread Inactivce. It wil be equivallent to putting the thread on hold. */
LED_THREAD_ACTIVE = 0x200 /* Makes the LED Thread Active back. */
} LedEventInfo_t; /* Enumerated values of different driver states */
#define DRIVER_HALT 0xff
/*Structure which stores the information of different LED types
* and corresponding LED state information of driver states*/
typedef struct LedStateInfo_t
{
/*
* Structure which stores the information of different LED types
* and corresponding LED state information of driver states
*/
typedef struct LedStateInfo_t {
UCHAR LED_Type; /* specify GPIO number - use 0xFF if not used */
UCHAR LED_On_State; /* Bits set or reset for different states */
UCHAR LED_Blink_State; /* Bits set or reset for blinking LEDs for different states */
UCHAR GPIO_Num;
UCHAR BitPolarity; /*To represent whether H/W is normal polarity or reverse
polarity*/
}LEDStateInfo, *pLEDStateInfo;
UCHAR BitPolarity; /* To represent whether H/W is normal polarity or reverse polarity */
} LEDStateInfo, *pLEDStateInfo;
typedef struct _LED_INFO_STRUCT
{
typedef struct _LED_INFO_STRUCT {
LEDStateInfo LEDState[NUM_OF_LEDS];
BOOLEAN bIdleMode_tx_from_host; /*Variable to notify whether driver came out
from idlemode due to Host or target*/
BOOLEAN bIdleMode_tx_from_host; /* Variable to notify whether driver came out from idlemode due to Host or target*/
BOOLEAN bIdle_led_off;
wait_queue_head_t notify_led_event;
wait_queue_head_t idleModeSyncEvent;
struct task_struct *led_cntrl_threadid;
int led_thread_running;
struct task_struct *led_cntrl_threadid;
int led_thread_running;
BOOLEAN bLedInitDone;
} LED_INFO_STRUCT, *PLED_INFO_STRUCT;
//LED Thread state.
#define BCM_LED_THREAD_DISABLED 0 //LED Thread is not running.
#define BCM_LED_THREAD_RUNNING_ACTIVELY 1 //LED thread is running.
#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 //LED thread has been put on hold
/* LED Thread state. */
#define BCM_LED_THREAD_DISABLED 0 /* LED Thread is not running. */
#define BCM_LED_THREAD_RUNNING_ACTIVELY 1 /* LED thread is running. */
#define BCM_LED_THREAD_RUNNING_INACTIVELY 2 /*LED thread has been put on hold*/