microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

spi: convert drivers to use bits_per_word_mask 

Fill in the recently added spi_master.bits_per_word_mask field in as
many drivers as possible. Make related cleanups, such as removing any
redundant error-checking, or empty setup callbacks.

Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
This commit is contained in:
Stephen Warren 2013-05-21 20:36:35 -06:00 коммит произвёл Mark Brown
Родитель 2922a8de99
Коммит 24778be20f
28 изменённых файлов: 46 добавлений и 280 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

12
drivers/spi/spi-altera.c
Просмотреть файл

@ -103,16 +103,6 @@ static void altera_spi_chipsel(struct spi_device *spi, int value)
}
}
static int altera_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
{
return 0;
}
static int altera_spi_setup(struct spi_device *spi)
{
return 0;
}
static inline unsigned int hw_txbyte(struct altera_spi *hw, int count)
{
if (hw->tx) {
@ -231,7 +221,6 @@ static int altera_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = 16;
master->mode_bits = SPI_CS_HIGH;
master->setup = altera_spi_setup;
hw = spi_master_get_devdata(master);
platform_set_drvdata(pdev, hw);
@ -240,7 +229,6 @@ static int altera_spi_probe(struct platform_device *pdev)
hw->bitbang.master = spi_master_get(master);
if (!hw->bitbang.master)
return err;
hw->bitbang.setup_transfer = altera_spi_setupxfer;
hw->bitbang.chipselect = altera_spi_chipsel;
hw->bitbang.txrx_bufs = altera_spi_txrx;

4
drivers/spi/spi-ath79.c
Просмотреть файл

@ -155,9 +155,6 @@ static int ath79_spi_setup(struct spi_device *spi)
{
int status = 0;
if (spi->bits_per_word > 32)
return -EINVAL;
if (!spi->controller_state) {
status = ath79_spi_setup_cs(spi);
if (status)
@ -226,6 +223,7 @@ static int ath79_spi_probe(struct platform_device *pdev)
pdata = pdev->dev.platform_data;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->setup = ath79_spi_setup;
master->cleanup = ath79_spi_cleanup;
if (pdata) {

9
drivers/spi/spi-atmel.c
Просмотреть файл

@ -1268,13 +1268,6 @@ static int atmel_spi_setup(struct spi_device *spi)
return -EINVAL;
}
if (bits < 8 || bits > 16) {
dev_dbg(&spi->dev,
"setup: invalid bits_per_word %u (8 to 16)\n",
bits);
return -EINVAL;
}
/* see notes above re chipselect */
if (!atmel_spi_is_v2(as)
&& spi->chip_select == 0
@ -1515,7 +1508,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
master->num_chipselect = master->dev.of_node ? 0 : 4;

12
drivers/spi/spi-au1550.c
Просмотреть файл

@ -248,11 +248,6 @@ static int au1550_spi_setupxfer(struct spi_device *spi, struct spi_transfer *t)
hz = t->speed_hz;
}
if (bpw < 4 || bpw > 24) {
dev_err(&spi->dev, "setupxfer: invalid bits_per_word=%d\n",
bpw);
return -EINVAL;
}
if (hz > spi->max_speed_hz || hz > hw->freq_max || hz < hw->freq_min) {
dev_err(&spi->dev, "setupxfer: clock rate=%d out of range\n",
hz);
@ -296,12 +291,6 @@ static int au1550_spi_setup(struct spi_device *spi)
{
struct au1550_spi *hw = spi_master_get_devdata(spi->master);
if (spi->bits_per_word < 4 || spi->bits_per_word > 24) {
dev_err(&spi->dev, "setup: invalid bits_per_word=%d\n",
spi->bits_per_word);
return -EINVAL;
}
if (spi->max_speed_hz == 0)
spi->max_speed_hz = hw->freq_max;
if (spi->max_speed_hz > hw->freq_max
@ -782,6 +771,7 @@ static int au1550_spi_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 24);
hw = spi_master_get_devdata(master);

20
drivers/spi/spi-bcm63xx.c
Просмотреть файл

@ -124,17 +124,6 @@ static void bcm63xx_spi_setup_transfer(struct spi_device *spi,
/* the spi->mode bits understood by this driver: */
#define MODEBITS (SPI_CPOL | SPI_CPHA)
static int bcm63xx_spi_setup(struct spi_device *spi)
{
if (spi->bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, spi->bits_per_word);
return -EINVAL;
}
return 0;
}
static int bcm63xx_txrx_bufs(struct spi_device *spi, struct spi_transfer *first,
unsigned int num_transfers)
{
@ -277,13 +266,6 @@ static int bcm63xx_spi_transfer_one(struct spi_master *master,
* full-duplex transfers.
*/
list_for_each_entry(t, &m->transfers, transfer_list) {
if (t->bits_per_word != 8) {
dev_err(&spi->dev, "%s, unsupported bits_per_word=%d\n",
__func__, t->bits_per_word);
status = -EINVAL;
goto exit;
}
if (!first)
first = t;
@ -430,11 +412,11 @@ static int bcm63xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdata->bus_num;
master->num_chipselect = pdata->num_chipselect;
master->setup = bcm63xx_spi_setup;
master->prepare_transfer_hardware = bcm63xx_spi_prepare_transfer;
master->unprepare_transfer_hardware = bcm63xx_spi_unprepare_transfer;
master->transfer_one_message = bcm63xx_spi_transfer_one;
master->mode_bits = MODEBITS;
master->bits_per_word_mask = SPI_BPW_MASK(8);
bs->msg_type_shift = pdata->msg_type_shift;
bs->msg_ctl_width = pdata->msg_ctl_width;
bs->tx_io = (u8 *)(bs->regs + bcm63xx_spireg(SPI_MSG_DATA));

10
drivers/spi/spi-bfin-sport.c
Просмотреть файл

@ -417,7 +417,7 @@ bfin_sport_spi_pump_transfers(unsigned long data)
/* Bits per word setup */
bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0)
if (bits_per_word == 16)
drv_data->ops = &bfin_sport_transfer_ops_u16;
else
drv_data->ops = &bfin_sport_transfer_ops_u8;
@ -600,13 +600,6 @@ bfin_sport_spi_setup(struct spi_device *spi)
}
}
if (spi->bits_per_word % 8) {
dev_err(&spi->dev, "%d bits_per_word is not supported\n",
spi->bits_per_word);
ret = -EINVAL;
goto error;
}
/* translate common spi framework into our register
* following configure contents are same for tx and rx.
*/
@ -778,6 +771,7 @@ static int bfin_sport_spi_probe(struct platform_device *pdev)
drv_data->pin_req = platform_info->pin_req;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->bus_num = pdev->id;
master->num_chipselect = platform_info->num_chipselect;
master->cleanup = bfin_sport_spi_cleanup;

21
drivers/spi/spi-bfin5xx.c
Просмотреть файл

@ -643,21 +643,16 @@ static void bfin_spi_pump_transfers(unsigned long data)
/* Bits per word setup */
bits_per_word = transfer->bits_per_word;
if (bits_per_word % 16 == 0) {
if (bits_per_word == 16) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = (transfer->len) >> 1;
cr_width = BIT_CTL_WORDSIZE;
drv_data->ops = &bfin_bfin_spi_transfer_ops_u16;
} else if (bits_per_word % 8 == 0) {
} else if (bits_per_word == 8) {
drv_data->n_bytes = bits_per_word/8;
drv_data->len = transfer->len;
cr_width = 0;
drv_data->ops = &bfin_bfin_spi_transfer_ops_u8;
} else {
dev_err(&drv_data->pdev->dev, "transfer: unsupported bits_per_word\n");
message->status = -EINVAL;
bfin_spi_giveback(drv_data);
return;
}
cr = bfin_read(&drv_data->regs->ctl) & ~(BIT_CTL_TIMOD | BIT_CTL_WORDSIZE);
cr |= cr_width;
@ -808,13 +803,13 @@ static void bfin_spi_pump_transfers(unsigned long data)
bfin_write(&drv_data->regs->tdbr, chip->idle_tx_val);
else {
int loop;
if (bits_per_word % 16 == 0) {
if (bits_per_word == 16) {
u16 *buf = (u16 *)drv_data->tx;
for (loop = 0; loop < bits_per_word / 16;
loop++) {
bfin_write(&drv_data->regs->tdbr, *buf++);
}
} else if (bits_per_word % 8 == 0) {
} else if (bits_per_word == 8) {
u8 *buf = (u8 *)drv_data->tx;
for (loop = 0; loop < bits_per_word / 8; loop++)
bfin_write(&drv_data->regs->tdbr, *buf++);
@ -1033,12 +1028,6 @@ static int bfin_spi_setup(struct spi_device *spi)
chip->ctl_reg &= bfin_ctl_reg;
}
if (spi->bits_per_word % 8) {
dev_err(&spi->dev, "%d bits_per_word is not supported\n",
spi->bits_per_word);
goto error;
}
/* translate common spi framework into our register */
if (spi->mode & ~(SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST)) {
dev_err(&spi->dev, "unsupported spi modes detected\n");
@ -1299,7 +1288,7 @@ static int bfin_spi_probe(struct platform_device *pdev)
/* the spi->mode bits supported by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->bus_num = pdev->id;
master->num_chipselect = platform_info->num_chipselect;
master->cleanup = bfin_spi_cleanup;

7
drivers/spi/spi-clps711x.c
Просмотреть файл

@ -42,12 +42,6 @@ static int spi_clps711x_setup(struct spi_device *spi)
{
struct spi_clps711x_data *hw = spi_master_get_devdata(spi->master);
if (spi->bits_per_word != 8) {
dev_err(&spi->dev, "Unsupported master bus width %i\n",
spi->bits_per_word);
return -EINVAL;
}
/* We are expect that SPI-device is not selected */
gpio_direction_output(hw->chipselect[spi->chip_select],
!(spi->mode & SPI_CS_HIGH));
@ -190,6 +184,7 @@ static int spi_clps711x_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->mode_bits = SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->num_chipselect = pdata->num_chipselect;
master->setup = spi_clps711x_setup;
master->transfer_one_message = spi_clps711x_transfer_one_message;

11
drivers/spi/spi-coldfire-qspi.c
Просмотреть файл

@ -312,10 +312,7 @@ static int mcfqspi_transfer_one_message(struct spi_master *master,
bool cs_high = spi->mode & SPI_CS_HIGH;
u16 qmr = MCFQSPI_QMR_MSTR;
if (t->bits_per_word)
qmr |= t->bits_per_word << 10;
else
qmr |= spi->bits_per_word << 10;
qmr |= t->bits_per_word << 10;
if (spi->mode & SPI_CPHA)
qmr |= MCFQSPI_QMR_CPHA;
if (spi->mode & SPI_CPOL)
@ -377,11 +374,6 @@ static int mcfqspi_unprepare_transfer_hw(struct spi_master *master)
static int mcfqspi_setup(struct spi_device *spi)
{
if ((spi->bits_per_word < 8) || (spi->bits_per_word > 16)) {
dev_dbg(&spi->dev, "%d bits per word is not supported\n",
spi->bits_per_word);
return -EINVAL;
}
if (spi->chip_select >= spi->master->num_chipselect) {
dev_dbg(&spi->dev, "%d chip select is out of range\n",
spi->chip_select);
@ -477,6 +469,7 @@ static int mcfqspi_probe(struct platform_device *pdev)
mcfqspi->dev = &pdev->dev;
master->mode_bits = SPI_CS_HIGH | SPI_CPOL | SPI_CPHA;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(8, 16);
master->setup = mcfqspi_setup;
master->transfer_one_message = mcfqspi_transfer_one_message;
master->prepare_transfer_hardware = mcfqspi_prepare_transfer_hw;

8
drivers/spi/spi-davinci.c
Просмотреть файл

@ -299,16 +299,15 @@ static int davinci_spi_setup_transfer(struct spi_device *spi,
* Assign function pointer to appropriate transfer method
* 8bit, 16bit or 32bit transfer
*/
if (bits_per_word <= 8 && bits_per_word >= 2) {
if (bits_per_word <= 8) {
dspi->get_rx = davinci_spi_rx_buf_u8;
dspi->get_tx = davinci_spi_tx_buf_u8;
dspi->bytes_per_word[spi->chip_select] = 1;
} else if (bits_per_word <= 16 && bits_per_word >= 2) {
} else {
dspi->get_rx = davinci_spi_rx_buf_u16;
dspi->get_tx = davinci_spi_tx_buf_u16;
dspi->bytes_per_word[spi->chip_select] = 2;
} else
return -EINVAL;
}
if (!hz)
hz = spi->max_speed_hz;
@ -933,6 +932,7 @@ static int davinci_spi_probe(struct platform_device *pdev)
master->dev.of_node = pdev->dev.of_node;
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_chipselect;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(2, 16);
master->setup = davinci_spi_setup;
dspi->bitbang.chipselect = davinci_spi_chipselect;

26
drivers/spi/spi-dw.c
Просмотреть файл

@ -457,19 +457,7 @@ static void pump_transfers(unsigned long data)
}
if (transfer->bits_per_word) {
bits = transfer->bits_per_word;
switch (bits) {
case 8:
case 16:
dws->n_bytes = dws->dma_width = bits >> 3;
break;
default:
printk(KERN_ERR "MRST SPI0: unsupported bits:"
"%db\n", bits);
message->status = -EIO;
goto early_exit;
}
dws->n_bytes = dws->dma_width = bits >> 3;
cr0 = (bits - 1)
| (chip->type << SPI_FRF_OFFSET)
| (spi->mode << SPI_MODE_OFFSET)
@ -629,9 +617,6 @@ static int dw_spi_setup(struct spi_device *spi)
struct dw_spi_chip *chip_info = NULL;
struct chip_data *chip;
if (spi->bits_per_word != 8 && spi->bits_per_word != 16)
return -EINVAL;
/* Only alloc on first setup */
chip = spi_get_ctldata(spi);
if (!chip) {
@ -660,16 +645,12 @@ static int dw_spi_setup(struct spi_device *spi)
chip->enable_dma = chip_info->enable_dma;
}
if (spi->bits_per_word <= 8) {
if (spi->bits_per_word == 8) {
chip->n_bytes = 1;
chip->dma_width = 1;
} else if (spi->bits_per_word <= 16) {
} else if (spi->bits_per_word == 16) {
chip->n_bytes = 2;
chip->dma_width = 2;
} else {
/* Never take >16b case for MRST SPIC */
dev_err(&spi->dev, "invalid wordsize\n");
return -EINVAL;
}
chip->bits_per_word = spi->bits_per_word;
@ -824,6 +805,7 @@ int dw_spi_add_host(struct dw_spi *dws)
}
master->mode_bits = SPI_CPOL | SPI_CPHA;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
master->bus_num = dws->bus_num;
master->num_chipselect = dws->num_cs;
master->cleanup = dw_spi_cleanup;

11
drivers/spi/spi-ep93xx.c
Просмотреть файл

@ -296,12 +296,6 @@ static int ep93xx_spi_setup(struct spi_device *spi)
struct ep93xx_spi *espi = spi_master_get_devdata(spi->master);
struct ep93xx_spi_chip *chip;
if (spi->bits_per_word < 4 || spi->bits_per_word > 16) {
dev_err(&espi->pdev->dev, "invalid bits per word %d\n",
spi->bits_per_word);
return -EINVAL;
}
chip = spi_get_ctldata(spi);
if (!chip) {
dev_dbg(&espi->pdev->dev, "initial setup for %s\n",
@ -365,10 +359,6 @@ static int ep93xx_spi_transfer(struct spi_device *spi, struct spi_message *msg)
/* first validate each transfer */
list_for_each_entry(t, &msg->transfers, transfer_list) {
if (t->bits_per_word) {
if (t->bits_per_word < 4 || t->bits_per_word > 16)
return -EINVAL;
}
if (t->speed_hz && t->speed_hz < espi->min_rate)
return -EINVAL;
}
@ -1046,6 +1036,7 @@ static int ep93xx_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = info->num_chipselect;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
platform_set_drvdata(pdev, master);

9
drivers/spi/spi-fsl-espi.c
Просмотреть файл

@ -144,10 +144,6 @@ static int fsl_espi_setup_transfer(struct spi_device *spi,
if (!bits_per_word)
bits_per_word = spi->bits_per_word;
/* Make sure its a bit width we support [4..16] */
if ((bits_per_word < 4) || (bits_per_word > 16))
return -EINVAL;
if (!hz)
hz = spi->max_speed_hz;
@ -157,12 +153,10 @@ static int fsl_espi_setup_transfer(struct spi_device *spi,
cs->get_tx = mpc8xxx_spi_tx_buf_u32;
if (bits_per_word <= 8) {
cs->rx_shift = 8 - bits_per_word;
} else if (bits_per_word <= 16) {
} else
cs->rx_shift = 16 - bits_per_word;
if (spi->mode & SPI_LSB_FIRST)
cs->get_tx = fsl_espi_tx_buf_lsb;
} else {
return -EINVAL;
}
mpc8xxx_spi->rx_shift = cs->rx_shift;
@ -609,6 +603,7 @@ static struct spi_master * fsl_espi_probe(struct device *dev,
if (ret)
goto err_probe;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
master->setup = fsl_espi_setup;
mpc8xxx_spi = spi_master_get_devdata(master);

4
drivers/spi/spi-gpio.c
Просмотреть файл

@ -239,9 +239,6 @@ static int spi_gpio_setup(struct spi_device *spi)
struct spi_gpio *spi_gpio = spi_to_spi_gpio(spi);
struct device_node *np = spi->master->dev.of_node;
if (spi->bits_per_word > 32)
return -EINVAL;
if (np) {
/*
* In DT environments, the CS GPIOs have already been
@ -446,6 +443,7 @@ static int spi_gpio_probe(struct platform_device *pdev)
if (pdata)
spi_gpio->pdata = *pdata;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->flags = master_flags;
master->bus_num = pdev->id;
master->num_chipselect = SPI_N_CHIPSEL;

6
drivers/spi/spi-imx.c
Просмотреть файл

@ -698,11 +698,10 @@ static int spi_imx_setupxfer(struct spi_device *spi,
} else if (config.bpw <= 16) {
spi_imx->rx = spi_imx_buf_rx_u16;
spi_imx->tx = spi_imx_buf_tx_u16;
} else if (config.bpw <= 32) {
}
spi_imx->rx = spi_imx_buf_rx_u32;
spi_imx->tx = spi_imx_buf_tx_u32;
} else
BUG();
}
spi_imx->devtype_data->config(spi_imx, &config);
@ -783,6 +782,7 @@ static int spi_imx_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, master);
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->bus_num = pdev->id;
master->num_chipselect = num_cs;

7
drivers/spi/spi-mxs.c
Просмотреть файл

@ -75,12 +75,6 @@ static int mxs_spi_setup_transfer(struct spi_device *dev,
if (t && t->bits_per_word)
bits_per_word = t->bits_per_word;
if (bits_per_word != 8) {
dev_err(&dev->dev, "%s, unsupported bits_per_word=%d\n",
__func__, bits_per_word);
return -EINVAL;
}
hz = dev->max_speed_hz;
if (t && t->speed_hz)
hz = min(hz, t->speed_hz);
@ -548,6 +542,7 @@ static int mxs_spi_probe(struct platform_device *pdev)
master->transfer_one_message = mxs_spi_transfer_one;
master->setup = mxs_spi_setup;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->mode_bits = SPI_CPOL | SPI_CPHA;
master->num_chipselect = 3;
master->dev.of_node = np;

13
drivers/spi/spi-nuc900.c
Просмотреть файл

@ -174,17 +174,6 @@ static void nuc900_spi_gobusy(struct nuc900_spi *hw)
spin_unlock_irqrestore(&hw->lock, flags);
}
static int nuc900_spi_setupxfer(struct spi_device *spi,
struct spi_transfer *t)
{
return 0;
}
static int nuc900_spi_setup(struct spi_device *spi)
{
return 0;
}
static inline unsigned int hw_txbyte(struct nuc900_spi *hw, int count)
{
return hw->tx ? hw->tx[count] : 0;
@ -377,10 +366,8 @@ static int nuc900_spi_probe(struct platform_device *pdev)
master->num_chipselect = hw->pdata->num_cs;
master->bus_num = hw->pdata->bus_num;
hw->bitbang.master = hw->master;
hw->bitbang.setup_transfer = nuc900_spi_setupxfer;
hw->bitbang.chipselect = nuc900_spi_chipsel;
hw->bitbang.txrx_bufs = nuc900_spi_txrx;
hw->bitbang.master->setup = nuc900_spi_setup;
hw->res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (hw->res == NULL) {

12
drivers/spi/spi-omap-100k.c
Просмотреть файл

@ -298,12 +298,6 @@ static int omap1_spi100k_setup(struct spi_device *spi)
struct omap1_spi100k *spi100k;
struct omap1_spi100k_cs *cs = spi->controller_state;
if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
spi->bits_per_word);
return -EINVAL;
}
spi100k = spi_master_get_devdata(spi->master);
if (!cs) {
@ -451,10 +445,7 @@ static int omap1_spi100k_transfer(struct spi_device *spi, struct spi_message *m)
unsigned len = t->len;
if (t->speed_hz > OMAP1_SPI100K_MAX_FREQ
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
|| t->bits_per_word > 32))) {
|| (len && !(rx_buf || tx_buf))) {
dev_dbg(&spi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@ -509,6 +500,7 @@ static int omap1_spi100k_probe(struct platform_device *pdev)
master->cleanup = NULL;
master->num_chipselect = 2;
master->mode_bits = MODEBITS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
dev_set_drvdata(&pdev->dev, master);

13
drivers/spi/spi-omap2-mcspi.c
Просмотреть файл

@ -857,12 +857,6 @@ static int omap2_mcspi_setup(struct spi_device *spi)
struct omap2_mcspi_dma *mcspi_dma;
struct omap2_mcspi_cs *cs = spi->controller_state;
if (spi->bits_per_word < 4 || spi->bits_per_word > 32) {
dev_dbg(&spi->dev, "setup: unsupported %d bit words\n",
spi->bits_per_word);
return -EINVAL;
}
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
if (!cs) {
@ -1072,10 +1066,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
unsigned len = t->len;
if (t->speed_hz > OMAP2_MCSPI_MAX_FREQ
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
|| t->bits_per_word > 32))) {
|| (len && !(rx_buf || tx_buf))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@ -1196,7 +1187,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
master->setup = omap2_mcspi_setup;
master->prepare_transfer_hardware = omap2_prepare_transfer;
master->unprepare_transfer_hardware = omap2_unprepare_transfer;

13
drivers/spi/spi-ppc4xx.c
Просмотреть файл

@ -190,12 +190,6 @@ static int spi_ppc4xx_setupxfer(struct spi_device *spi, struct spi_transfer *t)
speed = min(t->speed_hz, spi->max_speed_hz);
}
if (bits_per_word != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
bits_per_word);
return -EINVAL;
}
if (!speed || (speed > spi->max_speed_hz)) {
dev_err(&spi->dev, "invalid speed_hz (%d)\n", speed);
return -EINVAL;
@ -229,12 +223,6 @@ static int spi_ppc4xx_setup(struct spi_device *spi)
{
struct spi_ppc4xx_cs *cs = spi->controller_state;
if (spi->bits_per_word != 8) {
dev_err(&spi->dev, "invalid bits-per-word (%d)\n",
spi->bits_per_word);
return -EINVAL;
}
if (!spi->max_speed_hz) {
dev_err(&spi->dev, "invalid max_speed_hz (must be non-zero)\n");
return -EINVAL;
@ -465,6 +453,7 @@ static int spi_ppc4xx_of_probe(struct platform_device *op)
bbp->use_dma = 0;
bbp->master->setup = spi_ppc4xx_setup;
bbp->master->cleanup = spi_ppc4xx_cleanup;
bbp->master->bits_per_word_mask = SPI_BPW_MASK(8);
/* the spi->mode bits understood by this driver: */
bbp->master->mode_bits =

20
drivers/spi/spi-pxa2xx.c
Просмотреть файл

@ -881,21 +881,6 @@ static int setup(struct spi_device *spi)
rx_thres = RX_THRESH_DFLT;
}
if (!pxa25x_ssp_comp(drv_data)
&& (spi->bits_per_word < 4 || spi->bits_per_word > 32)) {
dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
"b/w not 4-32 for type non-PXA25x_SSP\n",
drv_data->ssp_type, spi->bits_per_word);
return -EINVAL;
} else if (pxa25x_ssp_comp(drv_data)
&& (spi->bits_per_word < 4
|| spi->bits_per_word > 16)) {
dev_err(&spi->dev, "failed setup: ssp_type=%d, bits/wrd=%d "
"b/w not 4-16 for type PXA25x_SSP\n",
drv_data->ssp_type, spi->bits_per_word);
return -EINVAL;
}
/* Only alloc on first setup */
chip = spi_get_ctldata(spi);
if (!chip) {
@ -1011,9 +996,6 @@ static int setup(struct spi_device *spi)
chip->n_bytes = 4;
chip->read = u32_reader;
chip->write = u32_writer;
} else {
dev_err(&spi->dev, "invalid wordsize\n");
return -ENODEV;
}
chip->bits_per_word = spi->bits_per_word;
@ -1190,11 +1172,13 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
drv_data->ioaddr = ssp->mmio_base;
drv_data->ssdr_physical = ssp->phys_base + SSDR;
if (pxa25x_ssp_comp(drv_data)) {
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 16);
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE;
drv_data->dma_cr1 = 0;
drv_data->clear_sr = SSSR_ROR;
drv_data->mask_sr = SSSR_RFS | SSSR_TFS | SSSR_ROR;
} else {
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
drv_data->int_cr1 = SSCR1_TIE | SSCR1_RIE | SSCR1_TINTE;
drv_data->dma_cr1 = DEFAULT_DMA_CR1;
drv_data->clear_sr = SSSR_ROR | SSSR_TINT;

3
drivers/spi/spi-s3c64xx.c
Просмотреть файл

@ -1314,7 +1314,8 @@ static int s3c64xx_spi_probe(struct platform_device *pdev)
master->unprepare_transfer_hardware = s3c64xx_spi_unprepare_transfer;
master->num_chipselect = sci->num_cs;
master->dma_alignment = 8;
master->bits_per_word_mask = BIT(32 - 1) | BIT(16 - 1) | BIT(8 - 1);
master->bits_per_word_mask = SPI_BPW_MASK(32) | SPI_BPW_MASK(16) |
SPI_BPW_MASK(8);
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;

6
drivers/spi/spi-sirf.c
Просмотреть файл

@ -425,10 +425,6 @@ spi_sirfsoc_setup_transfer(struct spi_device *spi, struct spi_transfer *t)
rxfifo_ctrl = SIRFSOC_SPI_FIFO_THD(SIRFSOC_SPI_FIFO_SIZE / 2) |
SIRFSOC_SPI_FIFO_WIDTH_DWORD;
break;
default:
dev_err(&spi->dev, "Bits per word %d not supported\n",
bits_per_word);
return -EINVAL;
}
if (!(spi->mode & SPI_CS_HIGH))
@ -556,6 +552,8 @@ static int spi_sirfsoc_probe(struct platform_device *pdev)
sspi->bitbang.txrx_bufs = spi_sirfsoc_transfer;
sspi->bitbang.master->setup = spi_sirfsoc_setup;
master->bus_num = pdev->id;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(12) |
SPI_BPW_MASK(16) | SPI_BPW_MASK(32);
sspi->bitbang.master->dev.of_node = pdev->dev.of_node;
sspi->p = pinctrl_get_select_default(&pdev->dev);

16
drivers/spi/spi-ti-ssp.c
Просмотреть файл

@ -237,14 +237,6 @@ static void ti_ssp_spi_work(struct work_struct *work)
spin_unlock(&hw->lock);
}
static int ti_ssp_spi_setup(struct spi_device *spi)
{
if (spi->bits_per_word > 32)
return -EINVAL;
return 0;
}
static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m)
{
struct ti_ssp_spi *hw;
@ -269,12 +261,6 @@ static int ti_ssp_spi_transfer(struct spi_device *spi, struct spi_message *m)
dev_err(&spi->dev, "invalid xfer, full duplex\n");
return -EINVAL;
}
if (t->bits_per_word > 32) {
dev_err(&spi->dev, "invalid xfer width %d\n",
t->bits_per_word);
return -EINVAL;
}
}
spin_lock(&hw->lock);
@ -337,8 +323,8 @@ static int ti_ssp_spi_probe(struct platform_device *pdev)
master->bus_num = pdev->id;
master->num_chipselect = pdata->num_cs;
master->mode_bits = MODE_BITS;
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(1, 32);
master->flags = SPI_MASTER_HALF_DUPLEX;
master->setup = ti_ssp_spi_setup;
master->transfer = ti_ssp_spi_transfer;
error = spi_register_master(master);

17
drivers/spi/spi-topcliff-pch.c
Просмотреть файл

@ -472,11 +472,6 @@ static int pch_spi_setup(struct spi_device *pspi)
dev_dbg(&pspi->dev, "%s 8 bits per word\n", __func__);
}
if ((pspi->bits_per_word != 8) && (pspi->bits_per_word != 16)) {
dev_err(&pspi->dev, "%s Invalid bits per word\n", __func__);
return -EINVAL;
}
/* Check baud rate setting */
/* if baud rate of chip is greater than
max we can support,return error */
@ -537,17 +532,6 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
/* if baud rate has been specified validate the same */
if (transfer->speed_hz > PCH_MAX_BAUDRATE)
transfer->speed_hz = PCH_MAX_BAUDRATE;
/* if bits per word has been specified validate the same */
if (transfer->bits_per_word) {
if ((transfer->bits_per_word != 8)
&& (transfer->bits_per_word != 16)) {
retval = -EINVAL;
dev_err(&pspi->dev,
"%s Invalid bits per word\n", __func__);
goto err_return_spinlock;
}
}
}
spin_unlock_irqrestore(&data->lock, flags);
@ -1442,6 +1426,7 @@ static int pch_spi_pd_probe(struct platform_device *plat_dev)
master->setup = pch_spi_setup;
master->transfer = pch_spi_transfer;
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST;
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
data->board_dat = board_dat;
data->plat_dev = plat_dev;

8
drivers/spi/spi-txx9.c
Просмотреть файл

@ -116,17 +116,12 @@ static void txx9spi_cs_func(struct spi_device *spi, struct txx9spi *c,
static int txx9spi_setup(struct spi_device *spi)
{
struct txx9spi *c = spi_master_get_devdata(spi->master);
u8 bits_per_word;
if (!spi->max_speed_hz
|| spi->max_speed_hz > c->max_speed_hz
|| spi->max_speed_hz < c->min_speed_hz)
return -EINVAL;
bits_per_word = spi->bits_per_word;
if (bits_per_word != 8 && bits_per_word != 16)
return -EINVAL;
if (gpio_direction_output(spi->chip_select,
!(spi->mode & SPI_CS_HIGH))) {
dev_err(&spi->dev, "Cannot setup GPIO for chipselect.\n");
@ -319,8 +314,6 @@ static int txx9spi_transfer(struct spi_device *spi, struct spi_message *m)
if (!t->tx_buf && !t->rx_buf && t->len)
return -EINVAL;
if (bits_per_word != 8 && bits_per_word != 16)
return -EINVAL;
if (t->len & ((bits_per_word >> 3) - 1))
return -EINVAL;
if (speed_hz < c->min_speed_hz || speed_hz > c->max_speed_hz)
@ -411,6 +404,7 @@ static int txx9spi_probe(struct platform_device *dev)
master->setup = txx9spi_setup;
master->transfer = txx9spi_transfer;
master->num_chipselect = (u16)UINT_MAX; /* any GPIO numbers */
master->bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16);
ret = spi_register_master(master);
if (ret)

12
drivers/spi/spi-xcomm.c
Просмотреть файл

@ -76,7 +76,7 @@ static int spi_xcomm_setup_transfer(struct spi_xcomm *spi_xcomm,
{
unsigned int speed;
if ((t->bits_per_word && t->bits_per_word != 8) || t->len > 62)
if (t->len > 62)
return -EINVAL;
speed = t->speed_hz ? t->speed_hz : spi->max_speed_hz;
@ -209,14 +209,6 @@ static int spi_xcomm_transfer_one(struct spi_master *master,
return status;
}
static int spi_xcomm_setup(struct spi_device *spi)
{
if (spi->bits_per_word != 8)
return -EINVAL;
return 0;
}
static int spi_xcomm_probe(struct i2c_client *i2c,
const struct i2c_device_id *id)
{
@ -233,8 +225,8 @@ static int spi_xcomm_probe(struct i2c_client *i2c,
master->num_chipselect = 16;
master->mode_bits = SPI_CPHA | SPI_CPOL | SPI_3WIRE;
master->bits_per_word_mask = SPI_BPW_MASK(8);
master->flags = SPI_MASTER_HALF_DUPLEX;
master->setup = spi_xcomm_setup;
master->transfer_one_message = spi_xcomm_transfer_one;
master->dev.of_node = i2c->dev.of_node;
i2c_set_clientdata(i2c, master);

16
drivers/spi/spi-xilinx.c
Просмотреть файл

@ -232,21 +232,6 @@ static int xilinx_spi_setup_transfer(struct spi_device *spi,
return 0;
}
static int xilinx_spi_setup(struct spi_device *spi)
{
/* always return 0, we can not check the number of bits.
* There are cases when SPI setup is called before any driver is
* there, in that case the SPI core defaults to 8 bits, which we
* do not support in some cases. But if we return an error, the
* SPI device would not be registered and no driver can get hold of it
* When the driver is there, it will call SPI setup again with the
* correct number of bits per transfer.
* If a driver setups with the wrong bit number, it will fail when
* it tries to do a transfer
*/
return 0;
}
static void xilinx_spi_fill_tx_fifo(struct xilinx_spi *xspi)
{
u8 sr;
@ -377,7 +362,6 @@ struct spi_master *xilinx_spi_init(struct device *dev, struct resource *mem,
xspi->bitbang.chipselect = xilinx_spi_chipselect;
xspi->bitbang.setup_transfer = xilinx_spi_setup_transfer;
xspi->bitbang.txrx_bufs = xilinx_spi_txrx_bufs;
xspi->bitbang.master->setup = xilinx_spi_setup;
init_completion(&xspi->done);
if (!request_mem_region(mem->start, resource_size(mem),