microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

viafb: Separate global and fb-specific data 

This patch moves data of interest into a new viafb_dev structure which
describes the device as a whole; the idea here is to create a separation
between what all devices may need and what the framebuffer device in
particular needs.

I've also made some small steps toward thinning out the global.h mess.

Cc: ScottFang@viatech.com.cn
Cc: JosephChan@via.com.tw
Cc: Harald Welte <laforge@gnumonks.org>
Acked-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
This commit is contained in:
Jonathan Corbet 2010-04-22 13:48:09 -06:00
Родитель f045f77bc0
Коммит 24b4d82e47
12 изменённых файлов: 265 добавлений и 185 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

14
drivers/video/via/accel.c
Просмотреть файл

@ -18,6 +18,7 @@
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "global.h"
/*
@ -321,8 +322,7 @@ int viafb_init_engine(struct fb_info *info)
u32 vq_start_addr, vq_end_addr, vq_start_low, vq_end_low, vq_high,
vq_len, chip_name = viapar->shared->chip_info.gfx_chip_name;
engine = ioremap_nocache(info->fix.mmio_start, info->fix.mmio_len);
viapar->shared->engine_mmio = engine;
engine = viapar->shared->vdev->engine_mmio;
if (!engine) {
printk(KERN_WARNING "viafb_init_accel: ioremap failed, "
"hardware acceleration disabled\n");
@ -465,7 +465,7 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
struct viafb_par *viapar = info->par;
u32 temp, iga_path = viapar->iga_path;
temp = readl(viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
temp = readl(viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
switch (Status) {
case HW_Cursor_ON:
temp |= 0x1;
@ -482,7 +482,7 @@ void viafb_show_hw_cursor(struct fb_info *info, int Status)
default:
temp &= 0x7FFFFFFF;
}
writel(temp, viapar->shared->engine_mmio + VIA_REG_CURSOR_MODE);
writel(temp, viapar->shared->vdev->engine_mmio + VIA_REG_CURSOR_MODE);
}
void viafb_wait_engine_idle(struct fb_info *info)
@ -490,6 +490,7 @@ void viafb_wait_engine_idle(struct fb_info *info)
struct viafb_par *viapar = info->par;
int loop = 0;
u32 mask;
void __iomem *engine = viapar->shared->vdev->engine_mmio;
switch (viapar->shared->chip_info.twod_engine) {
case VIA_2D_ENG_H5:
@ -498,7 +499,7 @@ void viafb_wait_engine_idle(struct fb_info *info)
VIA_3D_ENG_BUSY_M1;
break;
default:
while (!(readl(viapar->shared->engine_mmio + VIA_REG_STATUS) &
while (!(readl(engine + VIA_REG_STATUS) &
VIA_VR_QUEUE_BUSY) && (loop < MAXLOOP)) {
loop++;
cpu_relax();
@ -507,8 +508,7 @@ void viafb_wait_engine_idle(struct fb_info *info)
break;
}
while ((readl(viapar->shared->engine_mmio + VIA_REG_STATUS) & mask) &&
(loop < MAXLOOP)) {
while ((readl(engine + VIA_REG_STATUS) & mask) && (loop < MAXLOOP)) {
loop++;
cpu_relax();
}

2
drivers/video/via/dvi.c
Просмотреть файл

@ -18,6 +18,8 @@
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "via_i2c.h"
#include "global.h"
static void tmds_register_write(int index, u8 data);

2
drivers/video/via/global.h
Просмотреть файл

@ -35,14 +35,12 @@
#include "debug.h"
#include "via-core.h"
#include "viafbdev.h"
#include "chip.h"
#include "accel.h"
#include "share.h"
#include "dvi.h"
#include "viamode.h"
#include "via_i2c.h"
#include "hw.h"
#include "lcd.h"

131
drivers/video/via/hw.c
Просмотреть файл

@ -18,7 +18,7 @@
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "global.h"
static struct pll_map pll_value[] = {
@ -526,8 +526,7 @@ static void dvi_patch_skew_dvp_low(void);
static void set_dvi_output_path(int set_iga, int output_interface);
static void set_lcd_output_path(int set_iga, int output_interface);
static void load_fix_bit_crtc_reg(void);
static void init_gfx_chip_info(struct pci_dev *pdev,
const struct pci_device_id *pdi);
static void init_gfx_chip_info(int chip_type);
static void init_tmds_chip_info(void);
static void init_lvds_chip_info(void);
static void device_screen_off(void);
@ -1911,10 +1910,9 @@ void viafb_fill_crtc_timing(struct crt_mode_table *crt_table,
}
void viafb_init_chip_info(struct pci_dev *pdev,
const struct pci_device_id *pdi)
void viafb_init_chip_info(int chip_type)
{
init_gfx_chip_info(pdev, pdi);
init_gfx_chip_info(chip_type);
init_tmds_chip_info();
init_lvds_chip_info();
@ -1981,12 +1979,11 @@ void viafb_update_device_setting(int hres, int vres,
}
}
static void init_gfx_chip_info(struct pci_dev *pdev,
const struct pci_device_id *pdi)
static void init_gfx_chip_info(int chip_type)
{
u8 tmp;
viaparinfo->chip_info->gfx_chip_name = pdi->driver_data;
viaparinfo->chip_info->gfx_chip_name = chip_type;
/* Check revision of CLE266 Chip */
if (viaparinfo->chip_info->gfx_chip_name == UNICHROME_CLE266) {
@ -2489,122 +2486,6 @@ static void disable_second_display_channel(void)
viafb_write_reg_mask(CR6A, VIACR, BIT6, BIT6);
}
static u_int16_t via_function3[] = {
CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3,
};
/* Get the BIOS-configured framebuffer size from PCI configuration space
* of function 3 in the respective chipset */
int viafb_get_fb_size_from_pci(void)
{
int i;
u_int8_t offset = 0;
u_int32_t FBSize;
u_int32_t VideoMemSize;
/* search for the "FUNCTION3" device in this chipset */
for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
struct pci_dev *pdev;
pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
NULL);
if (!pdev)
continue;
DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
switch (pdev->device) {
case CLE266_FUNCTION3:
case KM400_FUNCTION3:
offset = 0xE0;
break;
case CN400_FUNCTION3:
case CN700_FUNCTION3:
case CX700_FUNCTION3:
case KM800_FUNCTION3:
case KM890_FUNCTION3:
case P4M890_FUNCTION3:
case P4M900_FUNCTION3:
case VX800_FUNCTION3:
case VX855_FUNCTION3:
/*case CN750_FUNCTION3: */
offset = 0xA0;
break;
}
if (!offset)
break;
pci_read_config_dword(pdev, offset, &FBSize);
pci_dev_put(pdev);
}
if (!offset) {
printk(KERN_ERR "cannot determine framebuffer size\n");
return -EIO;
}
FBSize = FBSize & 0x00007000;
DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
if (viaparinfo->chip_info->gfx_chip_name < UNICHROME_CX700) {
switch (FBSize) {
case 0x00004000:
VideoMemSize = (16 << 20); /*16M */
break;
case 0x00005000:
VideoMemSize = (32 << 20); /*32M */
break;
case 0x00006000:
VideoMemSize = (64 << 20); /*64M */
break;
default:
VideoMemSize = (32 << 20); /*32M */
break;
}
} else {
switch (FBSize) {
case 0x00001000:
VideoMemSize = (8 << 20); /*8M */
break;
case 0x00002000:
VideoMemSize = (16 << 20); /*16M */
break;
case 0x00003000:
VideoMemSize = (32 << 20); /*32M */
break;
case 0x00004000:
VideoMemSize = (64 << 20); /*64M */
break;
case 0x00005000:
VideoMemSize = (128 << 20); /*128M */
break;
case 0x00006000:
VideoMemSize = (256 << 20); /*256M */
break;
case 0x00007000: /* Only on VX855/875 */
VideoMemSize = (512 << 20); /*512M */
break;
default:
VideoMemSize = (32 << 20); /*32M */
break;
}
}
return VideoMemSize;
}
void viafb_set_dpa_gfx(int output_interface, struct GFX_DPA_SETTING\
*p_gfx_dpa_setting)

4
drivers/video/via/hw.h
Просмотреть файл

@ -900,15 +900,13 @@ int viafb_setmode(struct VideoModeTable *vmode_tbl, int video_bpp,
struct VideoModeTable *vmode_tbl1, int video_bpp1);
void viafb_fill_var_timing_info(struct fb_var_screeninfo *var, int refresh,
struct VideoModeTable *vmode_tbl);
void viafb_init_chip_info(struct pci_dev *pdev,
const struct pci_device_id *pdi);
void viafb_init_chip_info(int chip_type);
void viafb_init_dac(int set_iga);
int viafb_get_pixclock(int hres, int vres, int vmode_refresh);
int viafb_get_refresh(int hres, int vres, u32 float_refresh);
void viafb_update_device_setting(int hres, int vres, int bpp,
int vmode_refresh, int flag);
int viafb_get_fb_size_from_pci(void);
void viafb_set_iga_path(void);
void viafb_set_primary_address(u32 addr);
void viafb_set_secondary_address(u32 addr);

3
drivers/video/via/lcd.c
Просмотреть файл

@ -18,7 +18,8 @@
* Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "via_i2c.h"
#include "global.h"
#include "lcdtbl.h"

185
drivers/video/via/via-core.c
Просмотреть файл

@ -7,9 +7,12 @@
/*
* Core code for the Via multifunction framebuffer device.
*/
#include "via-core.h"
#include "via_i2c.h"
#include "global.h"
#include <linux/module.h>
#include <linux/platform_device.h>
#include "global.h" /* Includes everything under the sun */
/*
* The default port config.
@ -23,6 +26,169 @@ static struct via_port_cfg adap_configs[] = {
{ 0, 0, 0, 0 }
};
/*
* We currently only support one viafb device (will there ever be
* more than one?), so just declare it globally here.
*/
static struct viafb_dev global_dev;
/*
* Figure out how big our framebuffer memory is. Kind of ugly,
* but evidently we can't trust the information found in the
* fbdev configuration area.
*/
static u16 via_function3[] = {
CLE266_FUNCTION3, KM400_FUNCTION3, CN400_FUNCTION3, CN700_FUNCTION3,
CX700_FUNCTION3, KM800_FUNCTION3, KM890_FUNCTION3, P4M890_FUNCTION3,
P4M900_FUNCTION3, VX800_FUNCTION3, VX855_FUNCTION3,
};
/* Get the BIOS-configured framebuffer size from PCI configuration space
* of function 3 in the respective chipset */
static int viafb_get_fb_size_from_pci(int chip_type)
{
int i;
u8 offset = 0;
u32 FBSize;
u32 VideoMemSize;
/* search for the "FUNCTION3" device in this chipset */
for (i = 0; i < ARRAY_SIZE(via_function3); i++) {
struct pci_dev *pdev;
pdev = pci_get_device(PCI_VENDOR_ID_VIA, via_function3[i],
NULL);
if (!pdev)
continue;
DEBUG_MSG(KERN_INFO "Device ID = %x\n", pdev->device);
switch (pdev->device) {
case CLE266_FUNCTION3:
case KM400_FUNCTION3:
offset = 0xE0;
break;
case CN400_FUNCTION3:
case CN700_FUNCTION3:
case CX700_FUNCTION3:
case KM800_FUNCTION3:
case KM890_FUNCTION3:
case P4M890_FUNCTION3:
case P4M900_FUNCTION3:
case VX800_FUNCTION3:
case VX855_FUNCTION3:
/*case CN750_FUNCTION3: */
offset = 0xA0;
break;
}
if (!offset)
break;
pci_read_config_dword(pdev, offset, &FBSize);
pci_dev_put(pdev);
}
if (!offset) {
printk(KERN_ERR "cannot determine framebuffer size\n");
return -EIO;
}
FBSize = FBSize & 0x00007000;
DEBUG_MSG(KERN_INFO "FB Size = %x\n", FBSize);
if (chip_type < UNICHROME_CX700) {
switch (FBSize) {
case 0x00004000:
VideoMemSize = (16 << 20); /*16M */
break;
case 0x00005000:
VideoMemSize = (32 << 20); /*32M */
break;
case 0x00006000:
VideoMemSize = (64 << 20); /*64M */
break;
default:
VideoMemSize = (32 << 20); /*32M */
break;
}
} else {
switch (FBSize) {
case 0x00001000:
VideoMemSize = (8 << 20); /*8M */
break;
case 0x00002000:
VideoMemSize = (16 << 20); /*16M */
break;
case 0x00003000:
VideoMemSize = (32 << 20); /*32M */
break;
case 0x00004000:
VideoMemSize = (64 << 20); /*64M */
break;
case 0x00005000:
VideoMemSize = (128 << 20); /*128M */
break;
case 0x00006000:
VideoMemSize = (256 << 20); /*256M */
break;
case 0x00007000: /* Only on VX855/875 */
VideoMemSize = (512 << 20); /*512M */
break;
default:
VideoMemSize = (32 << 20); /*32M */
break;
}
}
return VideoMemSize;
}
/*
* Figure out and map our MMIO regions.
*/
static int __devinit via_pci_setup_mmio(struct viafb_dev *vdev)
{
/*
* Hook up to the device registers.
*/
vdev->engine_start = pci_resource_start(vdev->pdev, 1);
vdev->engine_len = pci_resource_len(vdev->pdev, 1);
/* If this fails, others will notice later */
vdev->engine_mmio = ioremap_nocache(vdev->engine_start,
vdev->engine_len);
/*
* Likewise with I/O memory.
*/
vdev->fbmem_start = pci_resource_start(vdev->pdev, 0);
vdev->fbmem_len = viafb_get_fb_size_from_pci(vdev->chip_type);
if (vdev->fbmem_len < 0)
return vdev->fbmem_len;
vdev->fbmem = ioremap_nocache(vdev->fbmem_start, vdev->fbmem_len);
if (vdev->fbmem == NULL)
return -ENOMEM;
return 0;
}
static void __devexit via_pci_teardown_mmio(struct viafb_dev *vdev)
{
iounmap(vdev->fbmem);
iounmap(vdev->engine_mmio);
}
static int __devinit via_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
@ -32,23 +198,35 @@ static int __devinit via_pci_probe(struct pci_dev *pdev,
ret = pci_enable_device(pdev);
if (ret)
return ret;
/*
* Global device initialization.
*/
memset(&global_dev, 0, sizeof(global_dev));
global_dev.pdev = pdev;
global_dev.chip_type = ent->driver_data;
spin_lock_init(&global_dev.reg_lock);
ret = via_pci_setup_mmio(&global_dev);
if (ret)
goto out_disable;
/*
* Create the I2C busses. Bailing out on failure seems extreme,
* but that's what the code did before.
*/
ret = viafb_create_i2c_busses(adap_configs);
if (ret)
goto out_disable;
goto out_teardown;
/*
* Set up the framebuffer.
*/
ret = via_fb_pci_probe(pdev, ent);
ret = via_fb_pci_probe(&global_dev);
if (ret)
goto out_i2c;
return 0;
out_i2c:
viafb_delete_i2c_busses();
out_teardown:
via_pci_teardown_mmio(&global_dev);
out_disable:
pci_disable_device(pdev);
return ret;
@ -58,6 +236,7 @@ static void __devexit via_pci_remove(struct pci_dev *pdev)
{
viafb_delete_i2c_busses();
via_fb_pci_remove(pdev);
via_pci_teardown_mmio(&global_dev);
pci_disable_device(pdev);
}

38
drivers/video/via/via-core.h
Просмотреть файл

@ -22,6 +22,9 @@
#ifndef __VIA_CORE_H__
#define __VIA_CORE_H__
#include <linux/spinlock.h>
#include <linux/pci.h>
/*
* A description of each known serial I2C/GPIO port.
*/
@ -49,7 +52,38 @@ enum viafb_i2c_adap {
struct via_port_cfg {
enum via_port_type type;
enum via_port_mode mode;
u_int16_t io_port;
u_int8_t ioport_index;
u16 io_port;
u8 ioport_index;
};
/*
* This is the global viafb "device" containing stuff needed by
* all subdevs.
*/
struct viafb_dev {
struct pci_dev *pdev;
int chip_type;
/*
* Spinlock for access to device registers. Not yet
* globally used.
*/
spinlock_t reg_lock;
/*
* The framebuffer MMIO region. Little, if anything, touches
* this memory directly, and certainly nothing outside of the
* framebuffer device itself. We *do* have to be able to allocate
* chunks of this memory for other devices, though.
*/
unsigned long fbmem_start;
long fbmem_len;
void __iomem *fbmem;
/*
* The MMIO region for device registers.
*/
unsigned long engine_start;
unsigned long engine_len;
void __iomem *engine_mmio;
};
#endif /* __VIA_CORE_H__ */

2
drivers/video/via/via_i2c.c
Просмотреть файл

@ -19,6 +19,8 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "via_i2c.h"
#include "global.h"
/*

54
drivers/video/via/viafbdev.c
Просмотреть файл

@ -24,6 +24,7 @@
#include <linux/stat.h>
#define _MASTER_FILE
#include "via-core.h"
#include "global.h"
static char *viafb_name = "Via";
@ -220,7 +221,7 @@ static int viafb_check_var(struct fb_var_screeninfo *var,
/* Adjust var according to our driver's own table */
viafb_fill_var_timing_info(var, viafb_refresh, vmode_entry);
if (info->var.accel_flags & FB_ACCELF_TEXT &&
!ppar->shared->engine_mmio)
!ppar->shared->vdev->engine_mmio)
info->var.accel_flags = 0;
return 0;
@ -695,7 +696,7 @@ static void viafb_fillrect(struct fb_info *info,
rop = 0xF0;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: fillrect\n");
if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_FILL,
if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_FILL,
rect->width, rect->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, rect->dx, rect->dy,
NULL, 0, 0, 0, 0, fg_color, 0, rop))
@ -717,7 +718,7 @@ static void viafb_copyarea(struct fb_info *info,
return;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: copyarea\n");
if (shared->hw_bitblt(shared->engine_mmio, VIA_BITBLT_COLOR,
if (shared->hw_bitblt(shared->vdev->engine_mmio, VIA_BITBLT_COLOR,
area->width, area->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, area->dx, area->dy,
NULL, viapar->vram_addr, info->fix.line_length,
@ -754,7 +755,7 @@ static void viafb_imageblit(struct fb_info *info,
op = VIA_BITBLT_COLOR;
DEBUG_MSG(KERN_DEBUG "viafb 2D engine: imageblit\n");
if (shared->hw_bitblt(shared->engine_mmio, op,
if (shared->hw_bitblt(shared->vdev->engine_mmio, op,
image->width, image->height, info->var.bits_per_pixel,
viapar->vram_addr, info->fix.line_length, image->dx, image->dy,
(u32 *)image->data, 0, 0, 0, 0, fg_color, bg_color, 0))
@ -764,7 +765,7 @@ static void viafb_imageblit(struct fb_info *info,
static int viafb_cursor(struct fb_info *info, struct fb_cursor *cursor)
{
struct viafb_par *viapar = info->par;
void __iomem *engine = viapar->shared->engine_mmio;
void __iomem *engine = viapar->shared->vdev->engine_mmio;
u32 temp, xx, yy, bg_color = 0, fg_color = 0,
chip_name = viapar->shared->chip_info.gfx_chip_name;
int i, j = 0, cur_size = 64;
@ -1732,8 +1733,7 @@ static int parse_mode(const char *str, u32 *xres, u32 *yres)
}
int __devinit via_fb_pci_probe(struct pci_dev *pdev,
const struct pci_device_id *ent)
int __devinit via_fb_pci_probe(struct viafb_dev *vdev)
{
u32 default_xres, default_yres;
struct VideoModeTable *vmode_entry;
@ -1750,7 +1750,7 @@ int __devinit via_fb_pci_probe(struct pci_dev *pdev,
*/
viafbinfo = framebuffer_alloc(viafb_par_length +
ALIGN(sizeof(struct viafb_shared), BITS_PER_LONG/8),
&pdev->dev);
&vdev->pdev->dev);
if (!viafbinfo) {
printk(KERN_ERR"Could not allocate memory for viafb_info.\n");
return -ENOMEM;
@ -1758,6 +1758,7 @@ int __devinit via_fb_pci_probe(struct pci_dev *pdev,
viaparinfo = (struct viafb_par *)viafbinfo->par;
viaparinfo->shared = viafbinfo->par + viafb_par_length;
viaparinfo->shared->vdev = vdev;
viaparinfo->vram_addr = 0;
viaparinfo->tmds_setting_info = &viaparinfo->shared->tmds_setting_info;
viaparinfo->lvds_setting_info = &viaparinfo->shared->lvds_setting_info;
@ -1765,7 +1766,6 @@ int __devinit via_fb_pci_probe(struct pci_dev *pdev,
&viaparinfo->shared->lvds_setting_info2;
viaparinfo->crt_setting_info = &viaparinfo->shared->crt_setting_info;
viaparinfo->chip_info = &viaparinfo->shared->chip_info;
spin_lock_init(&viaparinfo->reg_lock);
if (viafb_dual_fb)
viafb_SAMM_ON = 1;
@ -1776,25 +1776,20 @@ int __devinit via_fb_pci_probe(struct pci_dev *pdev,
if (!viafb_SAMM_ON)
viafb_dual_fb = 0;
viafb_init_chip_info(pdev, ent);
viaparinfo->fbmem = pci_resource_start(pdev, 0);
viaparinfo->memsize = viafb_get_fb_size_from_pci();
if (viaparinfo->memsize < 0) {
rc = viaparinfo->memsize;
goto out_fb_release;
}
viafb_init_chip_info(vdev->chip_type);
/*
* The framebuffer will have been successfully mapped by
* the core (or we'd not be here), but we still need to
* set up our own accounting.
*/
viaparinfo->fbmem = vdev->fbmem_start;
viaparinfo->memsize = vdev->fbmem_len;
viaparinfo->fbmem_free = viaparinfo->memsize;
viaparinfo->fbmem_used = 0;
viafbinfo->screen_base = ioremap_nocache(viaparinfo->fbmem,
viaparinfo->memsize);
if (!viafbinfo->screen_base) {
printk(KERN_ERR "ioremap of fbmem failed\n");
rc = -ENOMEM;
goto out_fb_release;
}
viafbinfo->screen_base = vdev->fbmem;
viafbinfo->fix.mmio_start = pci_resource_start(pdev, 1);
viafbinfo->fix.mmio_len = pci_resource_len(pdev, 1);
viafbinfo->fix.mmio_start = vdev->engine_start;
viafbinfo->fix.mmio_len = vdev->engine_len;
viafbinfo->node = 0;
viafbinfo->fbops = &viafb_ops;
viafbinfo->flags = FBINFO_DEFAULT | FBINFO_HWACCEL_YPAN;
@ -1862,12 +1857,13 @@ int __devinit via_fb_pci_probe(struct pci_dev *pdev,
viafbinfo->var = default_var;
if (viafb_dual_fb) {
viafbinfo1 = framebuffer_alloc(viafb_par_length, &pdev->dev);
viafbinfo1 = framebuffer_alloc(viafb_par_length,
&vdev->pdev->dev);
if (!viafbinfo1) {
printk(KERN_ERR
"allocate the second framebuffer struct error\n");
rc = -ENOMEM;
goto out_unmap_screen;
goto out_fb_release;
}
viaparinfo1 = viafbinfo1->par;
memcpy(viaparinfo1, viaparinfo, viafb_par_length);
@ -1958,8 +1954,6 @@ out_dealloc_cmap:
out_fb1_release:
if (viafbinfo1)
framebuffer_release(viafbinfo1);
out_unmap_screen:
iounmap(viafbinfo->screen_base);
out_fb_release:
framebuffer_release(viafbinfo);
return rc;
@ -1972,8 +1966,6 @@ void __devexit via_fb_pci_remove(struct pci_dev *pdev)
unregister_framebuffer(viafbinfo);
if (viafb_dual_fb)
unregister_framebuffer(viafbinfo1);
iounmap((void *)viafbinfo->screen_base);
iounmap(viaparinfo->shared->engine_mmio);
framebuffer_release(viafbinfo);
if (viafb_dual_fb)

13
drivers/video/via/viafbdev.h
Просмотреть файл

@ -30,7 +30,6 @@
#include "share.h"
#include "chip.h"
#include "hw.h"
#include "via_i2c.h"
#define VERSION_MAJOR 2
#define VERSION_KERNEL 6 /* For kernel 2.6 */
@ -42,6 +41,7 @@
struct viafb_shared {
struct proc_dir_entry *proc_entry; /*viafb proc entry */
struct viafb_dev *vdev; /* Global dev info */
/* All the information will be needed to set engine */
struct tmds_setting_information tmds_setting_info;
@ -51,7 +51,6 @@ struct viafb_shared {
struct chip_information chip_info;
/* hardware acceleration stuff */
void __iomem *engine_mmio;
u32 cursor_vram_addr;
u32 vq_vram_addr; /* virtual queue address in video ram */
int (*hw_bitblt)(void __iomem *engine, u8 op, u32 width, u32 height,
@ -72,14 +71,6 @@ struct viafb_par {
struct viafb_shared *shared;
/*
* (jc) I believe one should use locking to protect against
* concurrent access to the device ports and registers. Thus,
* this lock. Use of it is *far* from universal, though...
* someday...
*/
spinlock_t reg_lock;
/* All the information will be needed to set engine */
/* depreciated, use the ones in shared directly */
struct tmds_setting_information *tmds_setting_info;
@ -107,7 +98,7 @@ u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information
void viafb_gpio_i2c_write_mask_lvds(struct lvds_setting_information
*plvds_setting_info, struct lvds_chip_information
*plvds_chip_info, struct IODATA io_data);
int via_fb_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
int via_fb_pci_probe(struct viafb_dev *vdev);
void via_fb_pci_remove(struct pci_dev *pdev);
/* Temporary */
int viafb_init(void);

2
drivers/video/via/vt1636.c
Просмотреть файл

@ -19,6 +19,8 @@
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
*/
#include "via-core.h"
#include "via_i2c.h"
#include "global.h"
u8 viafb_gpio_i2c_read_lvds(struct lvds_setting_information