ARM: PNX4008: convert watchdog to use clk API enable/disable calls

clk_set_rate() is not supposed to be used to turn clocks on and off.
That's what clk_enable/clk_disable is for.

Acked-by: Wim Van Sebroeck <wim@iguana.be>
Acked-by: Vitaly Wool <vitalywool@gmail.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mach-pnx4008/clock.c

@@ -740,10 +740,10 @@ static struct clk wdt_ck = {
 	.name = "wdt_ck",
 	.parent = &per_ck,
 	.flags = NEEDS_INITIALIZATION,
-	.round_rate = &on_off_round_rate,
-	.set_rate = &on_off_set_rate,
 	.enable_shift = 0,
 	.enable_reg = TIMCLKCTRL_REG,
+	.enable = clk_reg_enable,
+	.disable = clk_reg_disable,
 };
 
 /* These clocks are visible outside this module

drivers/watchdog/pnx4008_wdt.c

@@ -96,9 +96,6 @@ static void wdt_enable(void)
 {
 	spin_lock(&io_lock);
 
-	if (wdt_clk)
-		clk_set_rate(wdt_clk, 1);
-
 	/* stop counter, initiate counter reset */
 	__raw_writel(RESET_COUNT, WDTIM_CTRL(wdt_base));
 	/*wait for reset to complete. 100% guarantee event */
@@ -125,19 +122,25 @@ static void wdt_disable(void)
 	spin_lock(&io_lock);
 
 	__raw_writel(0, WDTIM_CTRL(wdt_base));	/*stop counter */
-	if (wdt_clk)
-		clk_set_rate(wdt_clk, 0);
 
 	spin_unlock(&io_lock);
 }
 
 static int pnx4008_wdt_open(struct inode *inode, struct file *file)
 {
+	int ret;
+
 	if (test_and_set_bit(WDT_IN_USE, &wdt_status))
 		return -EBUSY;
 
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
+	ret = clk_enable(wdt_clk);
+	if (ret) {
+		clear_bit(WDT_IN_USE, &wdt_status);
+		return ret;
+	}
+
 	wdt_enable();
 
 	return nonseekable_open(inode, file);
@@ -225,6 +228,7 @@ static int pnx4008_wdt_release(struct inode *inode, struct file *file)
 		printk(KERN_WARNING "WATCHDOG: Device closed unexpectdly\n");
 
 	wdt_disable();
+	clk_disable(wdt_clk);
 	clear_bit(WDT_IN_USE, &wdt_status);
 	clear_bit(WDT_OK_TO_CLOSE, &wdt_status);
 
@@ -279,19 +283,27 @@ static int __devinit pnx4008_wdt_probe(struct platform_device *pdev)
 		release_resource(wdt_mem);
 		kfree(wdt_mem);
 		goto out;
-	} else
-		clk_set_rate(wdt_clk, 1);
+	}
+
+	ret = clk_enable(wdt_clk);
+	if (ret) {
+		release_resource(wdt_mem);
+		kfree(wdt_mem);
+		goto out;
+	}
 
 	ret = misc_register(&pnx4008_wdt_miscdev);
 	if (ret < 0) {
 		printk(KERN_ERR MODULE_NAME "cannot register misc device\n");
 		release_resource(wdt_mem);
 		kfree(wdt_mem);
-		clk_set_rate(wdt_clk, 0);
+		clk_disable(wdt_clk);
+		clk_put(wdt_clk);
 	} else {
 		boot_status = (__raw_readl(WDTIM_RES(wdt_base)) & WDOG_RESET) ?
 		    WDIOF_CARDRESET : 0;
 		wdt_disable();		/*disable for now */
+		clk_disable(wdt_clk);
 		set_bit(WDT_DEVICE_INITED, &wdt_status);
 	}
 
@@ -302,11 +314,10 @@ out:
 static int __devexit pnx4008_wdt_remove(struct platform_device *pdev)
 {
 	misc_deregister(&pnx4008_wdt_miscdev);
-	if (wdt_clk) {
-		clk_set_rate(wdt_clk, 0);
-		clk_put(wdt_clk);
-		wdt_clk = NULL;
-	}
+
+	clk_disable(wdt_clk);
+	clk_put(wdt_clk);
+
 	if (wdt_mem) {
 		release_resource(wdt_mem);
 		kfree(wdt_mem);