microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branch 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip 

Pull x86 mm updates from Ingo Molnar:
 "The dominant change in this cycle was the continued work to isolate
  kernel drivers from MTRR legacies: this tree gets rid of all kernel
  internal driver interfaces to MTRRs (mostly by rewriting it to proper
  PAT interfaces), the only access left is the /proc/mtrr ABI.

  This work was done by Luis R Rodriguez.

  There's also some related PCI interface additions for which I've
  Cc:-ed Bjorn"

* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
  x86/mm/mtrr: Remove kernel internal MTRR interfaces: unexport mtrr_add() and mtrr_del()
  s390/io: Add pci_iomap_wc() and pci_iomap_wc_range()
  drivers/dma/iop-adma: Use dma_alloc_writecombine() kernel-style
  drivers/video/fbdev/vt8623fb: Use arch_phys_wc_add() and pci_iomap_wc()
  drivers/video/fbdev/s3fb: Use arch_phys_wc_add() and pci_iomap_wc()
  drivers/video/fbdev/arkfb.c: Use arch_phys_wc_add() and pci_iomap_wc()
  PCI: Add pci_iomap_wc() variants
  drivers/video/fbdev/gxt4500: Use pci_ioremap_wc_bar() to map framebuffer
  drivers/video/fbdev/kyrofb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()
  drivers/video/fbdev/i740fb: Use arch_phys_wc_add() and pci_ioremap_wc_bar()
  PCI: Add pci_ioremap_wc_bar()
  x86/mm: Make kernel/check.c explicitly non-modular
  x86/mm/pat: Make mm/pageattr[-test].c explicitly non-modular
  x86/mm/pat: Add comments to cachemode translation tables
  arch/*/io.h: Add ioremap_uc() to all architectures
  drivers/video/fbdev/atyfb: Use arch_phys_wc_add() and ioremap_wc()
  drivers/video/fbdev/atyfb: Replace MTRR UC hole with strong UC
  drivers/video/fbdev/atyfb: Clarify ioremap() base and length used
  drivers/video/fbdev/atyfb: Carve out framebuffer length fudging into a helper
  x86/mm, asm-generic: Add IOMMU ioremap_uc() variant default
  ...
This commit is contained in:
Linus Torvalds 2015-09-01 10:07:40 -07:00
Родитель 2962156d5c 2baa891e42
Коммит 25525bea46
32 изменённых файлов: 254 добавлений и 222 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

20
Documentation/x86/mtrr.txt
Просмотреть файл

@ -6,10 +6,22 @@ Luis R. Rodriguez <mcgrof@do-not-panic.com> - April 9, 2015
===============================================================================
Phasing out MTRR use
MTRR use is replaced on modern x86 hardware with PAT. Over time the only type
of effective MTRR that is expected to be supported will be for write-combining.
As MTRR use is phased out device drivers should use arch_phys_wc_add() to make
MTRR effective on non-PAT systems while a no-op on PAT enabled systems.
MTRR use is replaced on modern x86 hardware with PAT. Direct MTRR use by
drivers on Linux is now completely phased out, device drivers should use
arch_phys_wc_add() in combination with ioremap_wc() to make MTRR effective on
non-PAT systems while a no-op but equally effective on PAT enabled systems.
Even if Linux does not use MTRRs directly, some x86 platform firmware may still
set up MTRRs early before booting the OS. They do this as some platform
firmware may still have implemented access to MTRRs which would be controlled
and handled by the platform firmware directly. An example of platform use of
MTRRs is through the use of SMI handlers, one case could be for fan control,
the platform code would need uncachable access to some of its fan control
registers. Such platform access does not need any Operating System MTRR code in
place other than mtrr_type_lookup() to ensure any OS specific mapping requests
are aligned with platform MTRR setup. If MTRRs are only set up by the platform
firmware code though and the OS does not make any specific MTRR mapping
requests mtrr_type_lookup() should always return MTRR_TYPE_INVALID.
For details refer to Documentation/x86/pat.txt.

1
arch/avr32/include/asm/io.h
Просмотреть файл

@ -297,6 +297,7 @@ extern void __iounmap(void __iomem *addr);
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
#define ioremap_uc ioremap_nocache
#define cached(addr) P1SEGADDR(addr)
#define uncached(addr) P2SEGADDR(addr)

1
arch/frv/include/asm/io.h
Просмотреть файл

@ -278,6 +278,7 @@ static inline void __iomem *ioremap_fullcache(unsigned long physaddr, unsigned l
}
#define ioremap_wc ioremap_nocache
#define ioremap_uc ioremap_nocache
extern void iounmap(void volatile __iomem *addr);

1
arch/m32r/include/asm/io.h
Просмотреть файл

@ -69,6 +69,7 @@ extern void iounmap(volatile void __iomem *addr);
#define ioremap_nocache(off,size) ioremap(off,size)
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
#define ioremap_uc ioremap_nocache
/*
* IO bus memory addresses are also 1:1 with the physical address

1
arch/m68k/include/asm/io_mm.h
Просмотреть файл

@ -468,6 +468,7 @@ static inline void __iomem *ioremap_nocache(unsigned long physaddr, unsigned lon
{
return __ioremap(physaddr, size, IOMAP_NOCACHE_SER);
}
#define ioremap_uc ioremap_nocache
static inline void __iomem *ioremap_wt(unsigned long physaddr,
unsigned long size)
{

1
arch/mn10300/include/asm/io.h
Просмотреть файл

@ -283,6 +283,7 @@ static inline void __iomem *ioremap_nocache(unsigned long offset, unsigned long
#define ioremap_wc ioremap_nocache
#define ioremap_wt ioremap_nocache
#define ioremap_uc ioremap_nocache
static inline void iounmap(void __iomem *addr)
{

1
arch/powerpc/include/asm/io.h
Просмотреть файл

@ -721,6 +721,7 @@ extern void __iomem *ioremap_prot(phys_addr_t address, unsigned long size,
unsigned long flags);
extern void __iomem *ioremap_wc(phys_addr_t address, unsigned long size);
#define ioremap_nocache(addr, size) ioremap((addr), (size))
#define ioremap_uc(addr, size) ioremap((addr), (size))
extern void iounmap(volatile void __iomem *addr);

2
arch/s390/include/asm/io.h
Просмотреть файл

@ -57,6 +57,8 @@ static inline void ioport_unmap(void __iomem *p)
*/
#define pci_iomap pci_iomap
#define pci_iounmap pci_iounmap
#define pci_iomap_wc pci_iomap
#define pci_iomap_wc_range pci_iomap_range
#define memcpy_fromio(dst, src, count) zpci_memcpy_fromio(dst, src, count)
#define memcpy_toio(dst, src, count) zpci_memcpy_toio(dst, src, count)

1
arch/sh/include/asm/io.h
Просмотреть файл

@ -368,6 +368,7 @@ static inline int iounmap_fixed(void __iomem *addr) { return -EINVAL; }
#endif
#define ioremap_nocache ioremap
#define ioremap_uc ioremap
#define iounmap __iounmap
/*

1
arch/tile/include/asm/io.h
Просмотреть файл

@ -55,6 +55,7 @@ extern void iounmap(volatile void __iomem *addr);
#define ioremap_nocache(physaddr, size) ioremap(physaddr, size)
#define ioremap_wc(physaddr, size) ioremap(physaddr, size)
#define ioremap_wt(physaddr, size) ioremap(physaddr, size)
#define ioremap_uc(physaddr, size) ioremap(physaddr, size)
#define ioremap_fullcache(physaddr, size) ioremap(physaddr, size)
#define mmiowb()

2
arch/x86/include/asm/io.h
Просмотреть файл

@ -180,6 +180,8 @@ static inline unsigned int isa_virt_to_bus(volatile void *address)
*/
extern void __iomem *ioremap_nocache(resource_size_t offset, unsigned long size);
extern void __iomem *ioremap_uc(resource_size_t offset, unsigned long size);
#define ioremap_uc ioremap_uc
extern void __iomem *ioremap_cache(resource_size_t offset, unsigned long size);
extern void __iomem *ioremap_prot(resource_size_t offset, unsigned long size,
unsigned long prot_val);

5
arch/x86/kernel/check.c
Просмотреть файл

@ -1,4 +1,4 @@
#include <linux/module.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/kthread.h>
#include <linux/workqueue.h>
@ -163,6 +163,5 @@ static int start_periodic_check_for_corruption(void)
schedule_delayed_work(&bios_check_work, 0);
return 0;
}
module_init(start_periodic_check_for_corruption);
device_initcall(start_periodic_check_for_corruption);

2
arch/x86/kernel/cpu/mtrr/main.c
Просмотреть файл

@ -448,7 +448,6 @@ int mtrr_add(unsigned long base, unsigned long size, unsigned int type,
return mtrr_add_page(base >> PAGE_SHIFT, size >> PAGE_SHIFT, type,
increment);
}
EXPORT_SYMBOL(mtrr_add);
/**
* mtrr_del_page - delete a memory type region
@ -537,7 +536,6 @@ int mtrr_del(int reg, unsigned long base, unsigned long size)
return -EINVAL;
return mtrr_del_page(reg, base >> PAGE_SHIFT, size >> PAGE_SHIFT);
}
EXPORT_SYMBOL(mtrr_del);
/**
* arch_phys_wc_add - add a WC MTRR and handle errors if PAT is unavailable

7
arch/x86/mm/init.c
Просмотреть файл

@ -30,8 +30,11 @@
/*
* Tables translating between page_cache_type_t and pte encoding.
*
* Minimal supported modes are defined statically, they are modified
* during bootup if more supported cache modes are available.
* The default values are defined statically as minimal supported mode;
* WC and WT fall back to UC-. pat_init() updates these values to support
* more cache modes, WC and WT, when it is safe to do so. See pat_init()
* for the details. Note, __early_ioremap() used during early boot-time
* takes pgprot_t (pte encoding) and does not use these tables.
*
* Index into __cachemode2pte_tbl[] is the cachemode.
*

1
arch/x86/mm/init_32.c
Просмотреть файл

@ -137,6 +137,7 @@ page_table_range_init_count(unsigned long start, unsigned long end)
vaddr = start;
pgd_idx = pgd_index(vaddr);
pmd_idx = pmd_index(vaddr);
for ( ; (pgd_idx < PTRS_PER_PGD) && (vaddr != end); pgd_idx++) {
for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end);

4
arch/x86/mm/pageattr-test.c
Просмотреть файл

@ -8,6 +8,7 @@
#include <linux/kthread.h>
#include <linux/random.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/mm.h>
#include <linux/vmalloc.h>
@ -256,5 +257,4 @@ static int start_pageattr_test(void)
return 0;
}
module_init(start_pageattr_test);
device_initcall(start_pageattr_test);

1
arch/x86/mm/pageattr.c
Просмотреть файл

@ -4,7 +4,6 @@
*/
#include <linux/highmem.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/mm.h>
#include <linux/interrupt.h>

9
drivers/dma/iop-adma.c
Просмотреть файл

@ -1300,10 +1300,11 @@ static int iop_adma_probe(struct platform_device *pdev)
* note: writecombine gives slightly better performance, but
* requires that we explicitly flush the writes
*/
if ((adev->dma_desc_pool_virt = dma_alloc_writecombine(&pdev->dev,
plat_data->pool_size,
&adev->dma_desc_pool,
GFP_KERNEL)) == NULL) {
adev->dma_desc_pool_virt = dma_alloc_writecombine(&pdev->dev,
plat_data->pool_size,
&adev->dma_desc_pool,
GFP_KERNEL);
if (!adev->dma_desc_pool_virt) {
ret = -ENOMEM;
goto err_free_adev;
}

14
drivers/pci/pci.c
Просмотреть файл

@ -138,6 +138,20 @@ void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar)
return ioremap_nocache(res->start, resource_size(res));
}
EXPORT_SYMBOL_GPL(pci_ioremap_bar);
void __iomem *pci_ioremap_wc_bar(struct pci_dev *pdev, int bar)
{
/*
* Make sure the BAR is actually a memory resource, not an IO resource
*/
if (!(pci_resource_flags(pdev, bar) & IORESOURCE_MEM)) {
WARN_ON(1);
return NULL;
}
return ioremap_wc(pci_resource_start(pdev, bar),
pci_resource_len(pdev, bar));
}
EXPORT_SYMBOL_GPL(pci_ioremap_wc_bar);
#endif

36
drivers/video/fbdev/arkfb.c
Просмотреть файл

@ -26,13 +26,9 @@
#include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */
#include <video/vga.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
struct arkfb_info {
int mclk_freq;
int mtrr_reg;
int wc_cookie;
struct dac_info *dac;
struct vgastate state;
@ -102,10 +98,6 @@ static const struct svga_timing_regs ark_timing_regs = {
static char *mode_option = "640x480-8@60";
#ifdef CONFIG_MTRR
static int mtrr = 1;
#endif
MODULE_AUTHOR("(c) 2007 Ondrej Zajicek <santiago@crfreenet.org>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("fbdev driver for ARK 2000PV");
@ -115,11 +107,6 @@ MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
module_param_named(mode, mode_option, charp, 0444);
MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)");
#ifdef CONFIG_MTRR
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
#endif
static int threshold = 4;
module_param(threshold, int, 0644);
@ -1002,7 +989,7 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
info->fix.smem_len = pci_resource_len(dev, 0);
/* Map physical IO memory address into kernel space */
info->screen_base = pci_iomap(dev, 0, 0);
info->screen_base = pci_iomap_wc(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
dev_err(info->device, "iomap for framebuffer failed\n");
@ -1057,14 +1044,8 @@ static int ark_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
par->mtrr_reg = -1;
par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
}
#endif
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
info->fix.smem_len);
return 0;
/* Error handling */
@ -1092,14 +1073,7 @@ static void ark_pci_remove(struct pci_dev *dev)
if (info) {
struct arkfb_info *par = info->par;
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
#endif
arch_phys_wc_del(par->wc_cookie);
dac_release(par->dac);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);

5
drivers/video/fbdev/aty/atyfb.h
Просмотреть файл

@ -182,10 +182,7 @@ struct atyfb_par {
unsigned long irq_flags;
unsigned int irq;
spinlock_t int_lock;
#ifdef CONFIG_MTRR
int mtrr_aper;
int mtrr_reg;
#endif
int wc_cookie;
u32 mem_cntl;
struct crtc saved_crtc;
union aty_pll saved_pll;

109
drivers/video/fbdev/aty/atyfb_base.c
Просмотреть файл

@ -98,9 +98,6 @@
#ifdef CONFIG_PMAC_BACKLIGHT
#include <asm/backlight.h>
#endif
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
/*
* Debug flags.
@ -303,9 +300,7 @@ static struct fb_ops atyfb_ops = {
};
static bool noaccel;
#ifdef CONFIG_MTRR
static bool nomtrr;
#endif
static int vram;
static int pll;
static int mclk;
@ -427,6 +422,20 @@ static struct {
#endif /* CONFIG_FB_ATY_CT */
};
/*
* Last page of 8 MB (4 MB on ISA) aperture is MMIO,
* unless the auxiliary register aperture is used.
*/
static void aty_fudge_framebuffer_len(struct fb_info *info)
{
struct atyfb_par *par = (struct atyfb_par *) info->par;
if (!par->aux_start &&
(info->fix.smem_len == 0x800000 ||
(par->bus_type == ISA && info->fix.smem_len == 0x400000)))
info->fix.smem_len -= GUI_RESERVE;
}
static int correct_chipset(struct atyfb_par *par)
{
u8 rev;
@ -2603,14 +2612,7 @@ static int aty_init(struct fb_info *info)
if (par->pll_ops->resume_pll)
par->pll_ops->resume_pll(info, &par->pll);
/*
* Last page of 8 MB (4 MB on ISA) aperture is MMIO,
* unless the auxiliary register aperture is used.
*/
if (!par->aux_start &&
(info->fix.smem_len == 0x800000 ||
(par->bus_type == ISA && info->fix.smem_len == 0x400000)))
info->fix.smem_len -= GUI_RESERVE;
aty_fudge_framebuffer_len(info);
/*
* Disable register access through the linear aperture
@ -2621,25 +2623,13 @@ static int aty_init(struct fb_info *info)
aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, par) |
BUS_APER_REG_DIS, par);
#ifdef CONFIG_MTRR
par->mtrr_aper = -1;
par->mtrr_reg = -1;
if (!nomtrr) {
/* Cover the whole resource. */
par->mtrr_aper = mtrr_add(par->res_start, par->res_size,
MTRR_TYPE_WRCOMB, 1);
if (par->mtrr_aper >= 0 && !par->aux_start) {
/* Make a hole for mmio. */
par->mtrr_reg = mtrr_add(par->res_start + 0x800000 -
GUI_RESERVE, GUI_RESERVE,
MTRR_TYPE_UNCACHABLE, 1);
if (par->mtrr_reg < 0) {
mtrr_del(par->mtrr_aper, 0, 0);
par->mtrr_aper = -1;
}
}
}
#endif
if (!nomtrr)
/*
* Only the ioremap_wc()'d area will get WC here
* since ioremap_uc() was used on the entire PCI BAR.
*/
par->wc_cookie = arch_phys_wc_add(par->res_start,
par->res_size);
info->fbops = &atyfb_ops;
info->pseudo_palette = par->pseudo_palette;
@ -2767,17 +2757,8 @@ aty_init_exit:
/* restore video mode */
aty_set_crtc(par, &par->saved_crtc);
par->pll_ops->set_pll(info, &par->saved_pll);
arch_phys_wc_del(par->wc_cookie);
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
if (par->mtrr_aper >= 0) {
mtrr_del(par->mtrr_aper, 0, 0);
par->mtrr_aper = -1;
}
#endif
return ret;
}
@ -3459,7 +3440,11 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
}
info->fix.mmio_start = raddr;
par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
/*
* By using strong UC we force the MTRR to never have an
* effect on the MMIO region on both non-PAT and PAT systems.
*/
par->ati_regbase = ioremap_uc(info->fix.mmio_start, 0x1000);
if (par->ati_regbase == NULL)
return -ENOMEM;
@ -3482,7 +3467,24 @@ static int atyfb_setup_generic(struct pci_dev *pdev, struct fb_info *info,
/* Map in frame buffer */
info->fix.smem_start = addr;
info->screen_base = ioremap(addr, 0x800000);
/*
* The framebuffer is not always 8 MiB, that's just the size of the
* PCI BAR. We temporarily abuse smem_len here to store the size
* of the BAR. aty_init() will later correct it to match the actual
* framebuffer size.
*
* On devices that don't have the auxiliary register aperture, the
* registers are housed at the top end of the framebuffer PCI BAR.
* aty_fudge_framebuffer_len() is used to reduce smem_len to not
* overlap with the registers.
*/
info->fix.smem_len = 0x800000;
aty_fudge_framebuffer_len(info);
info->screen_base = ioremap_wc(info->fix.smem_start,
info->fix.smem_len);
if (info->screen_base == NULL) {
ret = -ENOMEM;
goto atyfb_setup_generic_fail;
@ -3554,6 +3556,7 @@ static int atyfb_pci_probe(struct pci_dev *pdev,
return -ENOMEM;
}
par = info->par;
par->bus_type = PCI;
info->fix = atyfb_fix;
info->device = &pdev->dev;
par->pci_id = pdev->device;
@ -3655,7 +3658,8 @@ static int __init atyfb_atari_probe(void)
* Map the video memory (physical address given)
* to somewhere in the kernel address space.
*/
info->screen_base = ioremap(phys_vmembase[m64_num], phys_size[m64_num]);
info->screen_base = ioremap_wc(phys_vmembase[m64_num],
phys_size[m64_num]);
info->fix.smem_start = (unsigned long)info->screen_base; /* Fake! */
par->ati_regbase = ioremap(phys_guiregbase[m64_num], 0x10000) +
0xFC00ul;
@ -3721,17 +3725,8 @@ static void atyfb_remove(struct fb_info *info)
if (M64_HAS(MOBIL_BUS))
aty_bl_exit(info->bl_dev);
#endif
arch_phys_wc_del(par->wc_cookie);
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
if (par->mtrr_aper >= 0) {
mtrr_del(par->mtrr_aper, 0, 0);
par->mtrr_aper = -1;
}
#endif
#ifndef __sparc__
if (par->ati_regbase)
iounmap(par->ati_regbase);
@ -3847,10 +3842,8 @@ static int __init atyfb_setup(char *options)
while ((this_opt = strsep(&options, ",")) != NULL) {
if (!strncmp(this_opt, "noaccel", 7)) {
noaccel = 1;
#ifdef CONFIG_MTRR
} else if (!strncmp(this_opt, "nomtrr", 6)) {
nomtrr = 1;
#endif
} else if (!strncmp(this_opt, "vram:", 5))
vram = simple_strtoul(this_opt + 5, NULL, 0);
else if (!strncmp(this_opt, "pll:", 4))
@ -4020,7 +4013,5 @@ module_param(comp_sync, int, 0);
MODULE_PARM_DESC(comp_sync, "Set composite sync signal to low (0) or high (1)");
module_param(mode, charp, 0);
MODULE_PARM_DESC(mode, "Specify resolution as \"<xres>x<yres>[-<bpp>][@<refresh>]\" ");
#ifdef CONFIG_MTRR
module_param(nomtrr, bool, 0);
MODULE_PARM_DESC(nomtrr, "bool: disable use of MTRR registers");
#endif

2
drivers/video/fbdev/gxt4500.c
Просмотреть файл

@ -662,7 +662,7 @@ static int gxt4500_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
info->fix.smem_start = fb_phys;
info->fix.smem_len = pci_resource_len(pdev, 1);
info->screen_base = pci_ioremap_bar(pdev, 1);
info->screen_base = pci_ioremap_wc_bar(pdev, 1);
if (!info->screen_base) {
dev_err(&pdev->dev, "gxt4500: cannot map framebuffer\n");
goto err_unmap_regs;

35
drivers/video/fbdev/i740fb.c
Просмотреть файл

@ -27,24 +27,15 @@
#include <linux/console.h>
#include <video/vga.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include "i740_reg.h"
static char *mode_option;
#ifdef CONFIG_MTRR
static int mtrr = 1;
#endif
struct i740fb_par {
unsigned char __iomem *regs;
bool has_sgram;
#ifdef CONFIG_MTRR
int mtrr_reg;
#endif
int wc_cookie;
bool ddc_registered;
struct i2c_adapter ddc_adapter;
struct i2c_algo_bit_data ddc_algo;
@ -1040,7 +1031,7 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
goto err_request_regions;
}
info->screen_base = pci_ioremap_bar(dev, 0);
info->screen_base = pci_ioremap_wc_bar(dev, 0);
if (!info->screen_base) {
dev_err(info->device, "error remapping base\n");
ret = -ENOMEM;
@ -1144,13 +1135,9 @@ static int i740fb_probe(struct pci_dev *dev, const struct pci_device_id *ent)
fb_info(info, "%s frame buffer device\n", info->fix.id);
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
par->mtrr_reg = -1;
par->mtrr_reg = mtrr_add(info->fix.smem_start,
info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
}
#endif
if (mtrr)
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
info->fix.smem_len);
return 0;
err_reg_framebuffer:
@ -1177,13 +1164,7 @@ static void i740fb_remove(struct pci_dev *dev)
if (info) {
struct i740fb_par *par = info->par;
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
#endif
arch_phys_wc_del(par->wc_cookie);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
if (par->ddc_registered)
@ -1287,10 +1268,8 @@ static int __init i740fb_setup(char *options)
while ((opt = strsep(&options, ",")) != NULL) {
if (!*opt)
continue;
#ifdef CONFIG_MTRR
else if (!strncmp(opt, "mtrr:", 5))
mtrr = simple_strtoul(opt + 5, NULL, 0);
#endif
else
mode_option = opt;
}
@ -1327,7 +1306,5 @@ MODULE_DESCRIPTION("fbdev driver for Intel740");
module_param(mode_option, charp, 0444);
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
#ifdef CONFIG_MTRR
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
#endif

33
drivers/video/fbdev/kyro/fbdev.c
Просмотреть файл

@ -22,9 +22,6 @@
#include <linux/pci.h>
#include <asm/io.h>
#include <linux/uaccess.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
#include <video/kyro.h>
@ -84,9 +81,7 @@ static device_info_t deviceInfo;
static char *mode_option = NULL;
static int nopan = 0;
static int nowrap = 1;
#ifdef CONFIG_MTRR
static int nomtrr = 0;
#endif
/* PCI driver prototypes */
static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent);
@ -570,10 +565,8 @@ static int __init kyrofb_setup(char *options)
nopan = 1;
} else if (strcmp(this_opt, "nowrap") == 0) {
nowrap = 1;
#ifdef CONFIG_MTRR
} else if (strcmp(this_opt, "nomtrr") == 0) {
nomtrr = 1;
#endif
} else {
mode_option = this_opt;
}
@ -691,17 +684,16 @@ static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
currentpar->regbase = deviceInfo.pSTGReg =
ioremap_nocache(kyro_fix.mmio_start, kyro_fix.mmio_len);
if (!currentpar->regbase)
goto out_free_fb;
info->screen_base = ioremap_nocache(kyro_fix.smem_start,
kyro_fix.smem_len);
info->screen_base = pci_ioremap_wc_bar(pdev, 0);
if (!info->screen_base)
goto out_unmap_regs;
#ifdef CONFIG_MTRR
if (!nomtrr)
currentpar->mtrr_handle =
mtrr_add(kyro_fix.smem_start,
kyro_fix.smem_len,
MTRR_TYPE_WRCOMB, 1);
#endif
currentpar->wc_cookie = arch_phys_wc_add(kyro_fix.smem_start,
kyro_fix.smem_len);
kyro_fix.ypanstep = nopan ? 0 : 1;
kyro_fix.ywrapstep = nowrap ? 0 : 1;
@ -745,8 +737,10 @@ static int kyrofb_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
return 0;
out_unmap:
iounmap(currentpar->regbase);
iounmap(info->screen_base);
out_unmap_regs:
iounmap(currentpar->regbase);
out_free_fb:
framebuffer_release(info);
return -EINVAL;
@ -770,12 +764,7 @@ static void kyrofb_remove(struct pci_dev *pdev)
iounmap(info->screen_base);
iounmap(par->regbase);
#ifdef CONFIG_MTRR
if (par->mtrr_handle)
mtrr_del(par->mtrr_handle,
info->fix.smem_start,
info->fix.smem_len);
#endif
arch_phys_wc_del(par->wc_cookie);
unregister_framebuffer(info);
framebuffer_release(info);

35
drivers/video/fbdev/s3fb.c
Просмотреть файл

@ -28,13 +28,9 @@
#include <linux/i2c.h>
#include <linux/i2c-algo-bit.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
struct s3fb_info {
int chip, rev, mclk_freq;
int mtrr_reg;
int wc_cookie;
struct vgastate state;
struct mutex open_lock;
unsigned int ref_count;
@ -154,11 +150,7 @@ static const struct svga_timing_regs s3_timing_regs = {
static char *mode_option;
#ifdef CONFIG_MTRR
static int mtrr = 1;
#endif
static int fasttext = 1;
@ -170,11 +162,8 @@ module_param(mode_option, charp, 0444);
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
module_param_named(mode, mode_option, charp, 0444);
MODULE_PARM_DESC(mode, "Default video mode ('640x480-8@60', etc) (deprecated)");
#ifdef CONFIG_MTRR
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
#endif
module_param(fasttext, int, 0644);
MODULE_PARM_DESC(fasttext, "Enable S3 fast text mode (1=enable, 0=disable, default=1)");
@ -1168,7 +1157,7 @@ static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
info->fix.smem_len = pci_resource_len(dev, 0);
/* Map physical IO memory address into kernel space */
info->screen_base = pci_iomap(dev, 0, 0);
info->screen_base = pci_iomap_wc(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
dev_err(info->device, "iomap for framebuffer failed\n");
@ -1365,12 +1354,9 @@ static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
par->mtrr_reg = -1;
par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
}
#endif
if (mtrr)
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
info->fix.smem_len);
return 0;
@ -1405,14 +1391,7 @@ static void s3_pci_remove(struct pci_dev *dev)
if (info) {
par = info->par;
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
#endif
arch_phys_wc_del(par->wc_cookie);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);
@ -1551,10 +1530,8 @@ static int __init s3fb_setup(char *options)
if (!*opt)
continue;
#ifdef CONFIG_MTRR
else if (!strncmp(opt, "mtrr:", 5))
mtrr = simple_strtoul(opt + 5, NULL, 0);
#endif
else if (!strncmp(opt, "fasttext:", 9))
fasttext = simple_strtoul(opt + 9, NULL, 0);
else

31
drivers/video/fbdev/vt8623fb.c
Просмотреть файл

@ -26,13 +26,9 @@
#include <linux/console.h> /* Why should fb driver call console functions? because console_lock() */
#include <video/vga.h>
#ifdef CONFIG_MTRR
#include <asm/mtrr.h>
#endif
struct vt8623fb_info {
char __iomem *mmio_base;
int mtrr_reg;
int wc_cookie;
struct vgastate state;
struct mutex open_lock;
unsigned int ref_count;
@ -99,10 +95,7 @@ static struct svga_timing_regs vt8623_timing_regs = {
/* Module parameters */
static char *mode_option = "640x480-8@60";
#ifdef CONFIG_MTRR
static int mtrr = 1;
#endif
MODULE_AUTHOR("(c) 2006 Ondrej Zajicek <santiago@crfreenet.org>");
MODULE_LICENSE("GPL");
@ -112,11 +105,8 @@ module_param(mode_option, charp, 0644);
MODULE_PARM_DESC(mode_option, "Default video mode ('640x480-8@60', etc)");
module_param_named(mode, mode_option, charp, 0);
MODULE_PARM_DESC(mode, "Default video mode e.g. '648x480-8@60' (deprecated)");
#ifdef CONFIG_MTRR
module_param(mtrr, int, 0444);
MODULE_PARM_DESC(mtrr, "Enable write-combining with MTRR (1=enable, 0=disable, default=1)");
#endif
/* ------------------------------------------------------------------------- */
@ -710,7 +700,7 @@ static int vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
info->fix.mmio_len = pci_resource_len(dev, 1);
/* Map physical IO memory address into kernel space */
info->screen_base = pci_iomap(dev, 0, 0);
info->screen_base = pci_iomap_wc(dev, 0, 0);
if (! info->screen_base) {
rc = -ENOMEM;
dev_err(info->device, "iomap for framebuffer failed\n");
@ -781,12 +771,9 @@ static int vt8623_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
/* Record a reference to the driver data */
pci_set_drvdata(dev, info);
#ifdef CONFIG_MTRR
if (mtrr) {
par->mtrr_reg = -1;
par->mtrr_reg = mtrr_add(info->fix.smem_start, info->fix.smem_len, MTRR_TYPE_WRCOMB, 1);
}
#endif
if (mtrr)
par->wc_cookie = arch_phys_wc_add(info->fix.smem_start,
info->fix.smem_len);
return 0;
@ -816,13 +803,7 @@ static void vt8623_pci_remove(struct pci_dev *dev)
if (info) {
struct vt8623fb_info *par = info->par;
#ifdef CONFIG_MTRR
if (par->mtrr_reg >= 0) {
mtrr_del(par->mtrr_reg, 0, 0);
par->mtrr_reg = -1;
}
#endif
arch_phys_wc_del(par->wc_cookie);
unregister_framebuffer(info);
fb_dealloc_cmap(&info->cmap);

30
include/asm-generic/io.h
Просмотреть файл

@ -736,6 +736,35 @@ static inline void *phys_to_virt(unsigned long address)
}
#endif
/**
* DOC: ioremap() and ioremap_*() variants
*
* If you have an IOMMU your architecture is expected to have both ioremap()
* and iounmap() implemented otherwise the asm-generic helpers will provide a
* direct mapping.
*
* There are ioremap_*() call variants, if you have no IOMMU we naturally will
* default to direct mapping for all of them, you can override these defaults.
* If you have an IOMMU you are highly encouraged to provide your own
* ioremap variant implementation as there currently is no safe architecture
* agnostic default. To avoid possible improper behaviour default asm-generic
* ioremap_*() variants all return NULL when an IOMMU is available. If you've
* defined your own ioremap_*() variant you must then declare your own
* ioremap_*() variant as defined to itself to avoid the default NULL return.
*/
#ifdef CONFIG_MMU
#ifndef ioremap_uc
#define ioremap_uc ioremap_uc
static inline void __iomem *ioremap_uc(phys_addr_t offset, size_t size)
{
return NULL;
}
#endif
#else /* !CONFIG_MMU */
/*
* Change "struct page" to physical address.
*
@ -743,7 +772,6 @@ static inline void *phys_to_virt(unsigned long address)
* you'll need to provide your own definitions.
*/
#ifndef CONFIG_MMU
#ifndef ioremap
#define ioremap ioremap
static inline void __iomem *ioremap(phys_addr_t offset, size_t size)

14
include/asm-generic/pci_iomap.h
Просмотреть файл

@ -15,9 +15,13 @@ struct pci_dev;
#ifdef CONFIG_PCI
/* Create a virtual mapping cookie for a PCI BAR (memory or IO) */
extern void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long max);
extern void __iomem *pci_iomap_wc(struct pci_dev *dev, int bar, unsigned long max);
extern void __iomem *pci_iomap_range(struct pci_dev *dev, int bar,
unsigned long offset,
unsigned long maxlen);
extern void __iomem *pci_iomap_wc_range(struct pci_dev *dev, int bar,
unsigned long offset,
unsigned long maxlen);
/* Create a virtual mapping cookie for a port on a given PCI device.
* Do not call this directly, it exists to make it easier for architectures
* to override */
@ -34,12 +38,22 @@ static inline void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned lon
return NULL;
}
static inline void __iomem *pci_iomap_wc(struct pci_dev *dev, int bar, unsigned long max)
{
return NULL;
}
static inline void __iomem *pci_iomap_range(struct pci_dev *dev, int bar,
unsigned long offset,
unsigned long maxlen)
{
return NULL;
}
static inline void __iomem *pci_iomap_wc_range(struct pci_dev *dev, int bar,
unsigned long offset,
unsigned long maxlen)
{
return NULL;
}
#endif
#endif /* __ASM_GENERIC_IO_H */

1
include/linux/pci.h
Просмотреть файл

@ -1710,6 +1710,7 @@ static inline void pci_mmcfg_late_init(void) { }
int pci_ext_cfg_avail(void);
void __iomem *pci_ioremap_bar(struct pci_dev *pdev, int bar);
void __iomem *pci_ioremap_wc_bar(struct pci_dev *pdev, int bar);
#ifdef CONFIG_PCI_IOV
int pci_iov_virtfn_bus(struct pci_dev *dev, int id);

4
include/video/kyro.h
Просмотреть файл

@ -35,9 +35,7 @@ struct kyrofb_info {
/* Useful to hold depth here for Linux */
u8 PIXDEPTH;
#ifdef CONFIG_MTRR
int mtrr_handle;
#endif
int wc_cookie;
};
extern int kyro_dev_init(void);

66
lib/pci_iomap.c
Просмотреть файл

@ -51,6 +51,51 @@ void __iomem *pci_iomap_range(struct pci_dev *dev,
}
EXPORT_SYMBOL(pci_iomap_range);
/**
* pci_iomap_wc_range - create a virtual WC mapping cookie for a PCI BAR
* @dev: PCI device that owns the BAR
* @bar: BAR number
* @offset: map memory at the given offset in BAR
* @maxlen: max length of the memory to map
*
* Using this function you will get a __iomem address to your device BAR.
* You can access it using ioread*() and iowrite*(). These functions hide
* the details if this is a MMIO or PIO address space and will just do what
* you expect from them in the correct way. When possible write combining
* is used.
*
* @maxlen specifies the maximum length to map. If you want to get access to
* the complete BAR from offset to the end, pass %0 here.
* */
void __iomem *pci_iomap_wc_range(struct pci_dev *dev,
int bar,
unsigned long offset,
unsigned long maxlen)
{
resource_size_t start = pci_resource_start(dev, bar);
resource_size_t len = pci_resource_len(dev, bar);
unsigned long flags = pci_resource_flags(dev, bar);
if (flags & IORESOURCE_IO)
return NULL;
if (len <= offset || !start)
return NULL;
len -= offset;
start += offset;
if (maxlen && len > maxlen)
len = maxlen;
if (flags & IORESOURCE_MEM)
return ioremap_wc(start, len);
/* What? */
return NULL;
}
EXPORT_SYMBOL_GPL(pci_iomap_wc_range);
/**
* pci_iomap - create a virtual mapping cookie for a PCI BAR
* @dev: PCI device that owns the BAR
@ -70,4 +115,25 @@ void __iomem *pci_iomap(struct pci_dev *dev, int bar, unsigned long maxlen)
return pci_iomap_range(dev, bar, 0, maxlen);
}
EXPORT_SYMBOL(pci_iomap);
/**
* pci_iomap_wc - create a virtual WC mapping cookie for a PCI BAR
* @dev: PCI device that owns the BAR
* @bar: BAR number
* @maxlen: length of the memory to map
*
* Using this function you will get a __iomem address to your device BAR.
* You can access it using ioread*() and iowrite*(). These functions hide
* the details if this is a MMIO or PIO address space and will just do what
* you expect from them in the correct way. When possible write combining
* is used.
*
* @maxlen specifies the maximum length to map. If you want to get access to
* the complete BAR without checking for its length first, pass %0 here.
* */
void __iomem *pci_iomap_wc(struct pci_dev *dev, int bar, unsigned long maxlen)
{
return pci_iomap_wc_range(dev, bar, 0, maxlen);
}
EXPORT_SYMBOL_GPL(pci_iomap_wc);
#endif /* CONFIG_PCI */