ata: pata_hpt3x2n: disable fast interrupts in prereset() method

The PIO/DMA mode setting function is hardly a good place for disabling
the fast interrupts on a channel -- let's move that code to the driver's
prereset() method instead.

Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>

drivers/ata/pata_hpt3x2n.c

@@ -24,7 +24,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt3x2n"
-#define DRV_VERSION	"0.3.17"
+#define DRV_VERSION	"0.3.18"
 
 enum {
 	PCI66		=	(1 << 1),
@@ -166,6 +166,7 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 		{ 0x50, 1, 0x04, 0x04 },
 		{ 0x54, 1, 0x04, 0x04 }
 	};
+	u8 mcr2;
 
 	if (!pci_test_config_bits(pdev, &hpt3x2n_enable_bits[ap->port_no]))
 		return -ENOENT;
@@ -174,6 +175,11 @@ static int hpt3x2n_pre_reset(struct ata_link *link, unsigned long deadline)
 	pci_write_config_byte(pdev, 0x50 + 4 * ap->port_no, 0x37);
 	udelay(100);
 
+	/* Fast interrupt prediction disable, hold off interrupt disable */
+	pci_read_config_byte(pdev, 0x51 + 4 * ap->port_no, &mcr2);
+	mcr2 &= ~0x07;
+	pci_write_config_byte(pdev, 0x51 + 4 * ap->port_no, mcr2);
+
 	return ata_sff_prereset(link, deadline);
 }
 
@@ -181,17 +187,8 @@ static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev,
 			     u8 mode)
 {
 	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
-	u32 addr1, addr2;
+	int addr = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
 	u32 reg, timing, mask;
-	u8 fast;
-
-	addr1 = 0x40 + 4 * (adev->devno + 2 * ap->port_no);
-	addr2 = 0x51 + 4 * ap->port_no;
-
-	/* Fast interrupt prediction disable, hold off interrupt disable */
-	pci_read_config_byte(pdev, addr2, &fast);
-	fast &= ~0x07;
-	pci_write_config_byte(pdev, addr2, fast);
 
 	/* Determine timing mask and find matching mode entry */
 	if (mode < XFER_MW_DMA_0)
@@ -203,9 +200,9 @@ static void hpt3x2n_set_mode(struct ata_port *ap, struct ata_device *adev,
 
 	timing = hpt3x2n_find_mode(ap, mode);
 
-	pci_read_config_dword(pdev, addr1, &reg);
+	pci_read_config_dword(pdev, addr, &reg);
 	reg = (reg & ~mask) | (timing & mask);
-	pci_write_config_dword(pdev, addr1, reg);
+	pci_write_config_dword(pdev, addr, reg);
 }
 
 /**