diff --git a/Documentation/devicetree/bindings/display/atmel,lcdc.txt b/Documentation/devicetree/bindings/display/atmel,lcdc.txt index acb5a0132127..b5e355ada2fa 100644 --- a/Documentation/devicetree/bindings/display/atmel,lcdc.txt +++ b/Documentation/devicetree/bindings/display/atmel,lcdc.txt @@ -9,7 +9,6 @@ Required properties: "atmel,at91sam9g45-lcdc" , "atmel,at91sam9g45es-lcdc" , "atmel,at91sam9rl-lcdc" , - "atmel,at32ap-lcdc" - reg : Should contain 1 register ranges(address and length). Can contain an additional register range(address and length) for fixed framebuffer memory. Useful for dedicated memories. diff --git a/Documentation/devicetree/bindings/net/cdns,macb.yaml b/Documentation/devicetree/bindings/net/cdns,macb.yaml index dfb2860ca771..318f4efe7f6f 100644 --- a/Documentation/devicetree/bindings/net/cdns,macb.yaml +++ b/Documentation/devicetree/bindings/net/cdns,macb.yaml @@ -51,7 +51,6 @@ properties: - atmel,sama5d2-gem # GEM IP (10/100) on Atmel sama5d2 SoCs - atmel,sama5d3-gem # Gigabit IP on Atmel sama5d3 SoCs - atmel,sama5d4-gem # GEM IP (10/100) on Atmel sama5d4 SoCs - - cdns,at32ap7000-macb # Other 10/100 usage or use the generic form - cdns,np4-macb # NP4 SoC devices - microchip,sama7g5-emac # Microchip SAMA7G5 ethernet interface - microchip,sama7g5-gem # Microchip SAMA7G5 gigabit ethernet interface @@ -164,7 +163,7 @@ unevaluatedProperties: false examples: - | macb0: ethernet@fffc4000 { - compatible = "cdns,at32ap7000-macb"; + compatible = "cdns,macb"; reg = <0xfffc4000 0x4000>; interrupts = <21>; phy-mode = "rmii"; diff --git a/drivers/dma/dw/core.c b/drivers/dma/dw/core.c index 7ab83fe601ed..97ba3bfc10b1 100644 --- a/drivers/dma/dw/core.c +++ b/drivers/dma/dw/core.c @@ -29,9 +29,6 @@ * (DW_ahb_dmac) which is used with various AMBA 2.0 systems (not all * of which use ARM any more). See the "Databook" from Synopsys for * information beyond what licensees probably provide. - * - * The driver has been tested with the Atmel AT32AP7000, which does not - * support descriptor writeback. */ /* The set of bus widths supported by the DMA controller */ diff --git a/drivers/mfd/atmel-smc.c b/drivers/mfd/atmel-smc.c index d96f1d689e7f..f3bad2b52f17 100644 --- a/drivers/mfd/atmel-smc.c +++ b/drivers/mfd/atmel-smc.c @@ -240,7 +240,7 @@ EXPORT_SYMBOL_GPL(atmel_smc_cs_conf_set_cycle); * @conf: the SMC CS conf to apply * * Applies an SMC CS configuration. - * Only valid on at91sam9/avr32 SoCs. + * Only valid on at91sam9 SoCs. */ void atmel_smc_cs_conf_apply(struct regmap *regmap, int cs, const struct atmel_smc_cs_conf *conf) @@ -281,7 +281,7 @@ EXPORT_SYMBOL_GPL(atmel_hsmc_cs_conf_apply); * @conf: the SMC CS conf object to store the current conf * * Retrieve the SMC CS configuration. - * Only valid on at91sam9/avr32 SoCs. + * Only valid on at91sam9 SoCs. */ void atmel_smc_cs_conf_get(struct regmap *regmap, int cs, struct atmel_smc_cs_conf *conf) diff --git a/drivers/misc/atmel-ssc.c b/drivers/misc/atmel-ssc.c index 69f9b0336410..7f9f562d6433 100644 --- a/drivers/misc/atmel-ssc.c +++ b/drivers/misc/atmel-ssc.c @@ -276,7 +276,7 @@ static struct platform_driver ssc_driver = { }; module_platform_driver(ssc_driver); -MODULE_AUTHOR("Hans-Christian Egtvedt "); -MODULE_DESCRIPTION("SSC driver for Atmel AVR32 and AT91"); +MODULE_AUTHOR("Hans-Christian Noren Egtvedt "); +MODULE_DESCRIPTION("SSC driver for Atmel AT91"); MODULE_LICENSE("GPL"); MODULE_ALIAS("platform:ssc"); diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c index 494fe961a49d..66c7d08d376a 100644 --- a/drivers/net/ethernet/cadence/macb_main.c +++ b/drivers/net/ethernet/cadence/macb_main.c @@ -4784,7 +4784,6 @@ static const struct macb_config versal_config = { }; static const struct of_device_id macb_dt_ids[] = { - { .compatible = "cdns,at32ap7000-macb" }, { .compatible = "cdns,at91sam9260-macb", .data = &at91sam9260_config }, { .compatible = "cdns,macb" }, { .compatible = "cdns,np4-macb", .data = &np4_config }, diff --git a/drivers/usb/gadget/udc/Kconfig b/drivers/usb/gadget/udc/Kconfig index 43130110a0b4..5756acb07b8d 100644 --- a/drivers/usb/gadget/udc/Kconfig +++ b/drivers/usb/gadget/udc/Kconfig @@ -59,8 +59,8 @@ config USB_ATMEL_USBA tristate "Atmel USBA" depends on ARCH_AT91 help - USBA is the integrated high-speed USB Device controller on - the AT32AP700x, some AT91SAM9 and AT91CAP9 processors from Atmel. + USBA is the integrated high-speed USB Device controller on some + AT91SAM9 and AT91CAP9 processors from Atmel. The fifo_mode parameter is used to select endpoint allocation mode. fifo_mode = 0 is used to let the driver autoconfigure the endpoints. diff --git a/drivers/video/backlight/ltv350qv.c b/drivers/video/backlight/ltv350qv.c index b6d373af6e3f..d54f501e4285 100644 --- a/drivers/video/backlight/ltv350qv.c +++ b/drivers/video/backlight/ltv350qv.c @@ -27,8 +27,7 @@ struct ltv350qv { /* * The power-on and power-off sequences are taken from the * LTV350QV-F04 data sheet from Samsung. The register definitions are - * taken from the S6F2002 command list also from Samsung. Both - * documents are distributed with the AVR32 Linux BSP CD from Atmel. + * taken from the S6F2002 command list also from Samsung. * * There's still some voodoo going on here, but it's a lot better than * in the first incarnation of the driver where all we had was the raw diff --git a/sound/spi/Kconfig b/sound/spi/Kconfig index 44d39fa635ae..f407c37c37fa 100644 --- a/sound/spi/Kconfig +++ b/sound/spi/Kconfig @@ -19,7 +19,7 @@ config SND_AT73C213 DAC can be found on Atmel development boards. This driver requires the Atmel SSC driver for sound sink, a - peripheral found on most AT91 and AVR32 microprocessors. + peripheral found on most AT91 microprocessors. To compile this driver as a module, choose M here: the module will be called snd-at73c213.