watchdog: New watchdog driver for MEN A21 watchdogs
This patch adds the driver for the watchdog devices found on MEN Mikro Elektronik A21 VMEbus CPU Carrier Boards. It has DT-support and uses the watchdog framework. Signed-off-by: Johannes Thumshirn <johannes.thumshirn@men.de> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
This commit is contained in:
Johannes Thumshirn
Wim Van Sebroeck
Родитель
6910ceb5ca
Коммит
26c57ef1ea
|
|
@ -0,0 +1,25 @@
|
|||
Bindings for MEN A21 Watchdog device connected to GPIO lines
|
||||
|
||||
Required properties:
|
||||
- compatible: "men,a021-wdt"
|
||||
- gpios: Specifies the pins that control the Watchdog, order:
|
||||
1: Watchdog enable
|
||||
2: Watchdog fast-mode
|
||||
3: Watchdog trigger
|
||||
4: Watchdog reset cause bit 0
|
||||
5: Watchdog reset cause bit 1
|
||||
6: Watchdog reset cause bit 2
|
||||
|
||||
Optional properties:
|
||||
- None
|
||||
|
||||
Example:
|
||||
watchdog {
|
||||
compatible ="men,a021-wdt";
|
||||
gpios = <&gpio3 9 1 /* WD_EN */
|
||||
&gpio3 10 1 /* WD_FAST */
|
||||
&gpio3 11 1 /* WD_TRIG */
|
||||
&gpio3 6 1 /* RST_CAUSE[0] */
|
||||
&gpio3 7 1 /* RST_CAUSE[1] */
|
||||
&gpio3 8 1>; /* RST_CAUSE[2] */
|
||||
};
|
||||
|
|
@ -5394,6 +5394,12 @@ F: drivers/mtd/
|
|||
F: include/linux/mtd/
|
||||
F: include/uapi/mtd/
|
||||
|
||||
MEN A21 WATCHDOG DRIVER
|
||||
M: Johannes Thumshirn <johannes.thumshirn@men.de>
|
||||
L: linux-watchdog@vger.kernel.org
|
||||
S: Supported
|
||||
F: drivers/watchdog/mena21_wdt.c
|
||||
|
||||
METAG ARCHITECTURE
|
||||
M: James Hogan <james.hogan@imgtec.com>
|
||||
S: Supported
|
||||
|
|
|
|||
|
|
@ -1185,6 +1185,18 @@ config BOOKE_WDT_DEFAULT_TIMEOUT
|
|||
|
||||
The value can be overridden by the wdt_period command-line parameter.
|
||||
|
||||
config MEN_A21_WDT
|
||||
tristate "MEN A21 VME CPU Carrier Board Watchdog Timer"
|
||||
select WATCHDOG_CORE
|
||||
depends on GPIOLIB
|
||||
help
|
||||
Watchdog driver for MEN A21 VMEbus CPU Carrier Boards.
|
||||
|
||||
The driver can also be built as a module. If so, the module will be
|
||||
called mena21_wdt.
|
||||
|
||||
If unsure select N here.
|
||||
|
||||
# PPC64 Architecture
|
||||
|
||||
config WATCHDOG_RTAS
|
||||
|
|
|
|||
|
|
@ -144,6 +144,7 @@ obj-$(CONFIG_8xxx_WDT) += mpc8xxx_wdt.o
|
|||
obj-$(CONFIG_MV64X60_WDT) += mv64x60_wdt.o
|
||||
obj-$(CONFIG_PIKA_WDT) += pika_wdt.o
|
||||
obj-$(CONFIG_BOOKE_WDT) += booke_wdt.o
|
||||
obj-$(CONFIG_MEN_A21_WDT) += mena21_wdt.o
|
||||
|
||||
# PPC64 Architecture
|
||||
obj-$(CONFIG_WATCHDOG_RTAS) += wdrtas.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,270 @@
|
|||
/*
|
||||
* Watchdog driver for the A21 VME CPU Boards
|
||||
*
|
||||
* Copyright (C) 2013 MEN Mikro Elektronik Nuernberg GmbH
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License
|
||||
* as published by the Free Software Foundation
|
||||
*/
|
||||
#include <linux/module.h>
|
||||
#include <linux/moduleparam.h>
|
||||
#include <linux/types.h>
|
||||
#include <linux/kernel.h>
|
||||
#include <linux/slab.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/watchdog.h>
|
||||
#include <linux/uaccess.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/of_gpio.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/bitops.h>
|
||||
|
||||
#define NUM_GPIOS 6
|
||||
|
||||
enum a21_wdt_gpios {
|
||||
GPIO_WD_ENAB,
|
||||
GPIO_WD_FAST,
|
||||
GPIO_WD_TRIG,
|
||||
GPIO_WD_RST0,
|
||||
GPIO_WD_RST1,
|
||||
GPIO_WD_RST2,
|
||||
};
|
||||
|
||||
struct a21_wdt_drv {
|
||||
struct watchdog_device wdt;
|
||||
struct mutex lock;
|
||||
unsigned gpios[NUM_GPIOS];
|
||||
};
|
||||
|
||||
static bool nowayout = WATCHDOG_NOWAYOUT;
|
||||
module_param(nowayout, bool, 0);
|
||||
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
|
||||
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
|
||||
|
||||
static unsigned int a21_wdt_get_bootstatus(struct a21_wdt_drv *drv)
|
||||
{
|
||||
int reset = 0;
|
||||
|
||||
reset |= gpio_get_value(drv->gpios[GPIO_WD_RST0]) ? (1 << 0) : 0;
|
||||
reset |= gpio_get_value(drv->gpios[GPIO_WD_RST1]) ? (1 << 1) : 0;
|
||||
reset |= gpio_get_value(drv->gpios[GPIO_WD_RST2]) ? (1 << 2) : 0;
|
||||
|
||||
return reset;
|
||||
}
|
||||
|
||||
static int a21_wdt_start(struct watchdog_device *wdt)
|
||||
{
|
||||
struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
|
||||
|
||||
mutex_lock(&drv->lock);
|
||||
|
||||
gpio_set_value(drv->gpios[GPIO_WD_ENAB], 1);
|
||||
|
||||
mutex_unlock(&drv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a21_wdt_stop(struct watchdog_device *wdt)
|
||||
{
|
||||
struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
|
||||
|
||||
mutex_lock(&drv->lock);
|
||||
|
||||
gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
|
||||
|
||||
mutex_unlock(&drv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a21_wdt_ping(struct watchdog_device *wdt)
|
||||
{
|
||||
struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
|
||||
|
||||
mutex_lock(&drv->lock);
|
||||
|
||||
gpio_set_value(drv->gpios[GPIO_WD_TRIG], 0);
|
||||
ndelay(10);
|
||||
gpio_set_value(drv->gpios[GPIO_WD_TRIG], 1);
|
||||
|
||||
mutex_unlock(&drv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int a21_wdt_set_timeout(struct watchdog_device *wdt,
|
||||
unsigned int timeout)
|
||||
{
|
||||
struct a21_wdt_drv *drv = watchdog_get_drvdata(wdt);
|
||||
|
||||
if (timeout != 1 && timeout != 30) {
|
||||
dev_err(wdt->dev, "Only 1 and 30 allowed as timeout\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
if (timeout == 30 && wdt->timeout == 1) {
|
||||
dev_err(wdt->dev,
|
||||
"Transition from fast to slow mode not allowed\n");
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
mutex_lock(&drv->lock);
|
||||
|
||||
if (timeout == 1)
|
||||
gpio_set_value(drv->gpios[GPIO_WD_FAST], 1);
|
||||
else
|
||||
gpio_set_value(drv->gpios[GPIO_WD_FAST], 0);
|
||||
|
||||
wdt->timeout = timeout;
|
||||
|
||||
mutex_unlock(&drv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct watchdog_info a21_wdt_info = {
|
||||
.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
|
||||
.identity = "MEN A21 Watchdog",
|
||||
};
|
||||
|
||||
static const struct watchdog_ops a21_wdt_ops = {
|
||||
.owner = THIS_MODULE,
|
||||
.start = a21_wdt_start,
|
||||
.stop = a21_wdt_stop,
|
||||
.ping = a21_wdt_ping,
|
||||
.set_timeout = a21_wdt_set_timeout,
|
||||
};
|
||||
|
||||
static struct watchdog_device a21_wdt = {
|
||||
.info = &a21_wdt_info,
|
||||
.ops = &a21_wdt_ops,
|
||||
.min_timeout = 1,
|
||||
.max_timeout = 30,
|
||||
};
|
||||
|
||||
static int a21_wdt_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device_node *node;
|
||||
struct a21_wdt_drv *drv;
|
||||
unsigned int reset = 0;
|
||||
int num_gpios;
|
||||
int ret;
|
||||
int i;
|
||||
|
||||
drv = devm_kzalloc(&pdev->dev, sizeof(struct a21_wdt_drv), GFP_KERNEL);
|
||||
if (!drv)
|
||||
return -ENOMEM;
|
||||
|
||||
/* Fill GPIO pin array */
|
||||
node = pdev->dev.of_node;
|
||||
|
||||
num_gpios = of_gpio_count(node);
|
||||
if (num_gpios != NUM_GPIOS) {
|
||||
dev_err(&pdev->dev, "gpios DT property wrong, got %d want %d",
|
||||
num_gpios, NUM_GPIOS);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
for (i = 0; i < num_gpios; i++) {
|
||||
int val;
|
||||
|
||||
val = of_get_gpio(node, i);
|
||||
if (val < 0)
|
||||
return val;
|
||||
|
||||
drv->gpios[i] = val;
|
||||
}
|
||||
|
||||
/* Request the used GPIOs */
|
||||
for (i = 0; i < num_gpios; i++) {
|
||||
ret = devm_gpio_request(&pdev->dev, drv->gpios[i],
|
||||
"MEN A21 Watchdog");
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
if (i < GPIO_WD_RST0)
|
||||
ret = gpio_direction_output(drv->gpios[i],
|
||||
gpio_get_value(drv->gpios[i]));
|
||||
else /* GPIO_WD_RST[0..2] are inputs */
|
||||
ret = gpio_direction_input(drv->gpios[i]);
|
||||
if (ret)
|
||||
return ret;
|
||||
}
|
||||
|
||||
mutex_init(&drv->lock);
|
||||
watchdog_init_timeout(&a21_wdt, 30, &pdev->dev);
|
||||
watchdog_set_nowayout(&a21_wdt, nowayout);
|
||||
watchdog_set_drvdata(&a21_wdt, drv);
|
||||
|
||||
reset = a21_wdt_get_bootstatus(drv);
|
||||
if (reset == 2)
|
||||
a21_wdt.bootstatus |= WDIOF_EXTERN1;
|
||||
else if (reset == 4)
|
||||
a21_wdt.bootstatus |= WDIOF_CARDRESET;
|
||||
else if (reset == 5)
|
||||
a21_wdt.bootstatus |= WDIOF_POWERUNDER;
|
||||
else if (reset == 7)
|
||||
a21_wdt.bootstatus |= WDIOF_EXTERN2;
|
||||
|
||||
ret = watchdog_register_device(&a21_wdt);
|
||||
if (ret) {
|
||||
dev_err(&pdev->dev, "Cannot register watchdog device\n");
|
||||
goto err_register_wd;
|
||||
}
|
||||
|
||||
dev_set_drvdata(&pdev->dev, drv);
|
||||
|
||||
dev_info(&pdev->dev, "MEN A21 watchdog timer driver enabled\n");
|
||||
|
||||
return 0;
|
||||
|
||||
err_register_wd:
|
||||
mutex_destroy(&drv->lock);
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int a21_wdt_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
dev_warn(&pdev->dev,
|
||||
"Unregistering A21 watchdog driver, board may reboot\n");
|
||||
|
||||
watchdog_unregister_device(&drv->wdt);
|
||||
|
||||
mutex_destroy(&drv->lock);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static void a21_wdt_shutdown(struct platform_device *pdev)
|
||||
{
|
||||
struct a21_wdt_drv *drv = dev_get_drvdata(&pdev->dev);
|
||||
|
||||
gpio_set_value(drv->gpios[GPIO_WD_ENAB], 0);
|
||||
}
|
||||
|
||||
static const struct of_device_id a21_wdt_ids[] = {
|
||||
{ .compatible = "men,a021-wdt" },
|
||||
{ },
|
||||
};
|
||||
|
||||
static struct platform_driver a21_wdt_driver = {
|
||||
.probe = a21_wdt_probe,
|
||||
.remove = a21_wdt_remove,
|
||||
.shutdown = a21_wdt_shutdown,
|
||||
.driver = {
|
||||
.name = "a21-watchdog",
|
||||
.of_match_table = a21_wdt_ids,
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(a21_wdt_driver);
|
||||
|
||||
MODULE_AUTHOR("MEN Mikro Elektronik");
|
||||
MODULE_DESCRIPTION("MEN A21 Watchdog");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:a21-watchdog");
|
||||
Загрузка…
Ссылка в новой задаче