serial: sh-sci: Add more register documentation
Signed-off-by: Geert Uytterhoeven <geert+renesas@linux-m68k.org> Acked-by: Simon Horman <horms@verge.net.au> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This commit is contained in:
Geert Uytterhoeven
Greg Kroah-Hartman
Родитель
ff43da00e0
Коммит
26de4f1b2f
|
|
@ -911,7 +911,7 @@ static irqreturn_t sci_rx_interrupt(int irq, void *ptr)
|
|||
/* Disable future Rx interrupts */
|
||||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
||||
disable_irq_nosync(irq);
|
||||
scr |= 0x4000;
|
||||
scr |= SCSCR_RDRQE;
|
||||
} else {
|
||||
scr &= ~SCSCR_RIE;
|
||||
}
|
||||
|
|
@ -1200,7 +1200,9 @@ static void sci_set_mctrl(struct uart_port *port, unsigned int mctrl)
|
|||
*/
|
||||
reg = sci_getreg(port, SCFCR);
|
||||
if (reg->size)
|
||||
serial_port_out(port, SCFCR, serial_port_in(port, SCFCR) | 1);
|
||||
serial_port_out(port, SCFCR,
|
||||
serial_port_in(port, SCFCR) |
|
||||
SCFCR_LOOP);
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -1496,9 +1498,9 @@ static void sci_start_tx(struct uart_port *port)
|
|||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
||||
u16 new, scr = serial_port_in(port, SCSCR);
|
||||
if (s->chan_tx)
|
||||
new = scr | 0x8000;
|
||||
new = scr | SCSCR_TDRQE;
|
||||
else
|
||||
new = scr & ~0x8000;
|
||||
new = scr & ~SCSCR_TDRQE;
|
||||
if (new != scr)
|
||||
serial_port_out(port, SCSCR, new);
|
||||
}
|
||||
|
|
@ -1525,7 +1527,7 @@ static void sci_stop_tx(struct uart_port *port)
|
|||
ctrl = serial_port_in(port, SCSCR);
|
||||
|
||||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
||||
ctrl &= ~0x8000;
|
||||
ctrl &= ~SCSCR_TDRQE;
|
||||
|
||||
ctrl &= ~SCSCR_TIE;
|
||||
|
||||
|
|
@ -1539,7 +1541,7 @@ static void sci_start_rx(struct uart_port *port)
|
|||
ctrl = serial_port_in(port, SCSCR) | port_rx_irq_mask(port);
|
||||
|
||||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
||||
ctrl &= ~0x4000;
|
||||
ctrl &= ~SCSCR_RDRQE;
|
||||
|
||||
serial_port_out(port, SCSCR, ctrl);
|
||||
}
|
||||
|
|
@ -1551,7 +1553,7 @@ static void sci_stop_rx(struct uart_port *port)
|
|||
ctrl = serial_port_in(port, SCSCR);
|
||||
|
||||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB)
|
||||
ctrl &= ~0x4000;
|
||||
ctrl &= ~SCSCR_RDRQE;
|
||||
|
||||
ctrl &= ~port_rx_irq_mask(port);
|
||||
|
||||
|
|
@ -1614,7 +1616,7 @@ static void rx_timer_fn(unsigned long arg)
|
|||
u16 scr = serial_port_in(port, SCSCR);
|
||||
|
||||
if (port->type == PORT_SCIFA || port->type == PORT_SCIFB) {
|
||||
scr &= ~0x4000;
|
||||
scr &= ~SCSCR_RDRQE;
|
||||
enable_irq(s->irqs[SCIx_RXI_IRQ]);
|
||||
}
|
||||
serial_port_out(port, SCSCR, scr | SCSCR_RIE);
|
||||
|
|
@ -1871,13 +1873,13 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
|
|||
smr_val = serial_port_in(port, SCSMR) & 3;
|
||||
|
||||
if ((termios->c_cflag & CSIZE) == CS7)
|
||||
smr_val |= 0x40;
|
||||
smr_val |= SCSMR_CHR;
|
||||
if (termios->c_cflag & PARENB)
|
||||
smr_val |= 0x20;
|
||||
smr_val |= SCSMR_PE;
|
||||
if (termios->c_cflag & PARODD)
|
||||
smr_val |= 0x30;
|
||||
smr_val |= SCSMR_PE | SCSMR_ODD;
|
||||
if (termios->c_cflag & CSTOPB)
|
||||
smr_val |= 0x08;
|
||||
smr_val |= SCSMR_STOP;
|
||||
|
||||
uart_update_timeout(port, termios->c_cflag, baud);
|
||||
|
||||
|
|
@ -1885,7 +1887,7 @@ static void sci_set_termios(struct uart_port *port, struct ktermios *termios,
|
|||
__func__, smr_val, cks, t, s->cfg->scscr);
|
||||
|
||||
if (t >= 0) {
|
||||
serial_port_out(port, SCSMR, (smr_val & ~3) | cks);
|
||||
serial_port_out(port, SCSMR, (smr_val & ~SCSMR_CKS) | cks);
|
||||
serial_port_out(port, SCBRR, t);
|
||||
reg = sci_getreg(port, HSSRR);
|
||||
if (reg->size)
|
||||
|
|
|
|||
|
|
@ -10,45 +10,59 @@
|
|||
|
||||
#define SCIx_NOT_SUPPORTED (-1)
|
||||
|
||||
#define SCSCR_TIE (1 << 7)
|
||||
#define SCSCR_RIE (1 << 6)
|
||||
#define SCSCR_TE (1 << 5)
|
||||
#define SCSCR_RE (1 << 4)
|
||||
#define SCSCR_REIE (1 << 3) /* not supported by all parts */
|
||||
#define SCSCR_TOIE (1 << 2) /* not supported by all parts */
|
||||
#define SCSCR_CKE1 (1 << 1)
|
||||
#define SCSCR_CKE0 (1 << 0)
|
||||
/* SCSMR (Serial Mode Register) */
|
||||
#define SCSMR_CHR (1 << 6) /* 7-bit Character Length */
|
||||
#define SCSMR_PE (1 << 5) /* Parity Enable */
|
||||
#define SCSMR_ODD (1 << 4) /* Odd Parity */
|
||||
#define SCSMR_STOP (1 << 3) /* Stop Bit Length */
|
||||
#define SCSMR_CKS 0x0003 /* Clock Select */
|
||||
|
||||
/* SCxSR SCI */
|
||||
#define SCI_TDRE 0x80
|
||||
#define SCI_RDRF 0x40
|
||||
#define SCI_ORER 0x20
|
||||
#define SCI_FER 0x10
|
||||
#define SCI_PER 0x08
|
||||
#define SCI_TEND 0x04
|
||||
/* Serial Control Register (@ = not supported by all parts) */
|
||||
#define SCSCR_TIE (1 << 7) /* Transmit Interrupt Enable */
|
||||
#define SCSCR_RIE (1 << 6) /* Receive Interrupt Enable */
|
||||
#define SCSCR_TE (1 << 5) /* Transmit Enable */
|
||||
#define SCSCR_RE (1 << 4) /* Receive Enable */
|
||||
#define SCSCR_REIE (1 << 3) /* Receive Error Interrupt Enable @ */
|
||||
#define SCSCR_TOIE (1 << 2) /* Timeout Interrupt Enable @ */
|
||||
#define SCSCR_CKE1 (1 << 1) /* Clock Enable 1 */
|
||||
#define SCSCR_CKE0 (1 << 0) /* Clock Enable 0 */
|
||||
/* SCIFA/SCIFB only */
|
||||
#define SCSCR_TDRQE (1 << 15) /* Tx Data Transfer Request Enable */
|
||||
#define SCSCR_RDRQE (1 << 14) /* Rx Data Transfer Request Enable */
|
||||
|
||||
/* SCxSR (Serial Status Register) on SCI */
|
||||
#define SCI_TDRE 0x80 /* Transmit Data Register Empty */
|
||||
#define SCI_RDRF 0x40 /* Receive Data Register Full */
|
||||
#define SCI_ORER 0x20 /* Overrun Error */
|
||||
#define SCI_FER 0x10 /* Framing Error */
|
||||
#define SCI_PER 0x08 /* Parity Error */
|
||||
#define SCI_TEND 0x04 /* Transmit End */
|
||||
|
||||
#define SCI_DEFAULT_ERROR_MASK (SCI_PER | SCI_FER)
|
||||
|
||||
/* SCxSR SCIF, HSCIF */
|
||||
#define SCIF_ER 0x0080
|
||||
#define SCIF_TEND 0x0040
|
||||
#define SCIF_TDFE 0x0020
|
||||
#define SCIF_BRK 0x0010
|
||||
#define SCIF_FER 0x0008
|
||||
#define SCIF_PER 0x0004
|
||||
#define SCIF_RDF 0x0002
|
||||
#define SCIF_DR 0x0001
|
||||
/* SCxSR (Serial Status Register) on SCIF, HSCIF */
|
||||
#define SCIF_ER 0x0080 /* Receive Error */
|
||||
#define SCIF_TEND 0x0040 /* Transmission End */
|
||||
#define SCIF_TDFE 0x0020 /* Transmit FIFO Data Empty */
|
||||
#define SCIF_BRK 0x0010 /* Break Detect */
|
||||
#define SCIF_FER 0x0008 /* Framing Error */
|
||||
#define SCIF_PER 0x0004 /* Parity Error */
|
||||
#define SCIF_RDF 0x0002 /* Receive FIFO Data Full */
|
||||
#define SCIF_DR 0x0001 /* Receive Data Ready */
|
||||
|
||||
#define SCIF_DEFAULT_ERROR_MASK (SCIF_PER | SCIF_FER | SCIF_ER | SCIF_BRK)
|
||||
|
||||
/* SCSPTR, optional */
|
||||
#define SCSPTR_RTSIO (1 << 7)
|
||||
#define SCSPTR_CTSIO (1 << 5)
|
||||
#define SCSPTR_SPB2IO (1 << 1)
|
||||
#define SCSPTR_SPB2DT (1 << 0)
|
||||
/* SCFCR (FIFO Control Register) */
|
||||
#define SCFCR_LOOP (1 << 0) /* Loopback Test */
|
||||
|
||||
/* SCSPTR (Serial Port Register), optional */
|
||||
#define SCSPTR_RTSIO (1 << 7) /* Serial Port RTS Pin Input/Output */
|
||||
#define SCSPTR_CTSIO (1 << 5) /* Serial Port CTS Pin Input/Output */
|
||||
#define SCSPTR_SPB2IO (1 << 1) /* Serial Port Break Input/Output */
|
||||
#define SCSPTR_SPB2DT (1 << 0) /* Serial Port Break Data */
|
||||
|
||||
/* HSSRR HSCIF */
|
||||
#define HSCIF_SRE 0x8000
|
||||
#define HSCIF_SRE 0x8000 /* Sampling Rate Register Enable */
|
||||
|
||||
enum {
|
||||
SCIx_PROBE_REGTYPE,
|
||||
|
|
@ -73,10 +87,19 @@ enum {
|
|||
* Not all registers will exist on all parts.
|
||||
*/
|
||||
enum {
|
||||
SCSMR, SCBRR, SCSCR, SCxSR,
|
||||
SCFCR, SCFDR, SCxTDR, SCxRDR,
|
||||
SCLSR, SCTFDR, SCRFDR, SCSPTR,
|
||||
HSSRR,
|
||||
SCSMR, /* Serial Mode Register */
|
||||
SCBRR, /* Bit Rate Register */
|
||||
SCSCR, /* Serial Control Register */
|
||||
SCxSR, /* Serial Status Register */
|
||||
SCFCR, /* FIFO Control Register */
|
||||
SCFDR, /* FIFO Data Count Register */
|
||||
SCxTDR, /* Transmit (FIFO) Data Register */
|
||||
SCxRDR, /* Receive (FIFO) Data Register */
|
||||
SCLSR, /* Line Status Register */
|
||||
SCTFDR, /* Transmit FIFO Data Count Register */
|
||||
SCRFDR, /* Receive FIFO Data Count Register */
|
||||
SCSPTR, /* Serial Port Register */
|
||||
HSSRR, /* Sampling Rate Register */
|
||||
|
||||
SCIx_NR_REGS,
|
||||
};
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче