[PATCH] cs89x0: fix up after pnx0105 Kconfig symbol renaming

The Kconfig symbol for pnx0105 was recently renamed to ARCH_PNX010X.

Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org>
Cc: dmitry pervushin <dpervushin@ru.mvista.com>
Cc: <dsaxena@plexity.net>
Cc: Jeff Garzik <jgarzik@pobox.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

drivers/net/cs89x0.c

@@ -175,7 +175,7 @@ static unsigned int cs8900_irq_map[] = {1,0,0,0};
 #include <asm/irq.h>
 static unsigned int netcard_portlist[] __initdata = {IXDP2X01_CS8900_VIRT_BASE, 0};
 static unsigned int cs8900_irq_map[] = {IRQ_IXDP2X01_CS8900, 0, 0, 0};
-#elif defined(CONFIG_ARCH_PNX0105)
+#elif defined(CONFIG_ARCH_PNX010X)
 #include <asm/irq.h>
 #include <asm/arch/gpio.h>
 #define CIRRUS_DEFAULT_BASE	IO_ADDRESS(EXT_STATIC2_s0_BASE + 0x200000)	/* = Physical address 0x48200000 */
@@ -351,7 +351,7 @@ writeword(unsigned long base_addr, int portno, int value)
 	__raw_writel((u16)value, base_addr + (portno << 1));
 }
 #else
-#if defined(CONFIG_ARCH_PNX0501)
+#if defined(CONFIG_ARCH_PNX010X)
 static int
 readword(unsigned long base_addr, int portno)
 {
@@ -512,7 +512,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 #endif
         }
 
-#ifdef CONFIG_ARCH_PNX0105
+#ifdef CONFIG_ARCH_PNX010X
 	initialize_ebi();
 
 	/* Map GPIO registers for the pins connected to the CS8900a. */
@@ -780,7 +780,7 @@ cs89x0_probe1(struct net_device *dev, int ioaddr, int modular)
 	} else {
 		i = lp->isa_config & INT_NO_MASK;
 		if (lp->chip_type == CS8900) {
-#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX0105)
+#if defined(CONFIG_ARCH_IXDP2X01) || defined(CONFIG_ARCH_PNX010X)
 		        i = cs8900_irq_map[0];
 #else
 			/* Translate the IRQ using the IRQ mapping table. */
@@ -1256,7 +1256,7 @@ net_open(struct net_device *dev)
 	int i;
 	int ret;
 
-#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX0105) /* uses irq#1, so this won't work */
+#if !defined(CONFIG_SH_HICOSH4) && !defined(CONFIG_ARCH_PNX010X) /* uses irq#1, so this won't work */
 	if (dev->irq < 2) {
 		/* Allow interrupts to be generated by the chip */
 /* Cirrus' release had this: */
@@ -1287,7 +1287,7 @@ net_open(struct net_device *dev)
 	else
 #endif
 	{
-#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX0105)
+#if !defined(CONFIG_ARCH_IXDP2X01) && !defined(CONFIG_ARCH_PNX010X)
 		if (((1 << dev->irq) & lp->irq_map) == 0) {
 			printk(KERN_ERR "%s: IRQ %d is not in our map of allowable IRQs, which is %x\n",
                                dev->name, dev->irq, lp->irq_map);
@@ -1372,7 +1372,7 @@ net_open(struct net_device *dev)
 	case A_CNF_MEDIA_10B_2: result = lp->adapter_cnf & A_CNF_10B_2; break;
         default: result = lp->adapter_cnf & (A_CNF_10B_T | A_CNF_AUI | A_CNF_10B_2);
         }
-#ifdef CONFIG_ARCH_PNX0105
+#ifdef CONFIG_ARCH_PNX010X
 	result = A_CNF_10B_T;
 #endif
         if (!result) {