regulator: add driver for MAX8660/8661
Tested with a MX25-based custom board. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
This commit is contained in:
Wolfram Sang
Liam Girdwood
Родитель
718deb6b61
Коммит
27f37e4bfe
|
|
@ -69,6 +69,13 @@ config REGULATOR_MAX1586
|
|||
regulator via I2C bus. The provided regulator is suitable
|
||||
for PXA27x chips to control VCC_CORE and VCC_USIM voltages.
|
||||
|
||||
config REGULATOR_MAX8660
|
||||
tristate "Maxim 8660/8661 voltage regulator"
|
||||
depends on I2C
|
||||
help
|
||||
This driver controls a Maxim 8660/8661 voltage output
|
||||
regulator via I2C bus.
|
||||
|
||||
config REGULATOR_TWL4030
|
||||
bool "TI TWL4030/TWL5030/TWL6030/TPS695x0 PMIC"
|
||||
depends on TWL4030_CORE
|
||||
|
|
|
|||
|
|
@ -12,6 +12,7 @@ obj-$(CONFIG_REGULATOR_BQ24022) += bq24022.o
|
|||
obj-$(CONFIG_REGULATOR_LP3971) += lp3971.o
|
||||
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
|
||||
obj-$(CONFIG_REGULATOR_TWL4030) += twl-regulator.o
|
||||
obj-$(CONFIG_REGULATOR_MAX8660) += max8660.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-dcdc.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-isink.o
|
||||
obj-$(CONFIG_REGULATOR_WM831X) += wm831x-ldo.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,510 @@
|
|||
/*
|
||||
* max8660.c -- Voltage regulation for the Maxim 8660/8661
|
||||
*
|
||||
* based on max1586.c and wm8400-regulator.c
|
||||
*
|
||||
* Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the Free
|
||||
* Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful, but WITHOUT
|
||||
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
|
||||
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
|
||||
* more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License along with
|
||||
* this program; if not, write to the Free Software Foundation, Inc., 59 Temple
|
||||
* Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*
|
||||
* Some info:
|
||||
*
|
||||
* Datasheet: http://datasheets.maxim-ic.com/en/ds/MAX8660-MAX8661.pdf
|
||||
*
|
||||
* This chip is a bit nasty because it is a write-only device. Thus, the driver
|
||||
* uses shadow registers to keep track of its values. The main problem appears
|
||||
* to be the initialization: When Linux boots up, we cannot know if the chip is
|
||||
* in the default state or not, so we would have to pass such information in
|
||||
* platform_data. As this adds a bit of complexity to the driver, this is left
|
||||
* out for now until it is really needed.
|
||||
*
|
||||
* [A|S|M]DTV1 registers are currently not used, but [A|S|M]DTV2.
|
||||
*
|
||||
* If the driver is feature complete, it might be worth to check if one set of
|
||||
* functions for V3-V7 is sufficient. For maximum flexibility during
|
||||
* development, they are separated for now.
|
||||
*
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/i2c.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/regulator/driver.h>
|
||||
#include <linux/regulator/max8660.h>
|
||||
|
||||
#define MAX8660_DCDC_MIN_UV 725000
|
||||
#define MAX8660_DCDC_MAX_UV 1800000
|
||||
#define MAX8660_DCDC_STEP 25000
|
||||
#define MAX8660_DCDC_MAX_SEL 0x2b
|
||||
|
||||
#define MAX8660_LDO5_MIN_UV 1700000
|
||||
#define MAX8660_LDO5_MAX_UV 2000000
|
||||
#define MAX8660_LDO5_STEP 25000
|
||||
#define MAX8660_LDO5_MAX_SEL 0x0c
|
||||
|
||||
#define MAX8660_LDO67_MIN_UV 1800000
|
||||
#define MAX8660_LDO67_MAX_UV 3300000
|
||||
#define MAX8660_LDO67_STEP 100000
|
||||
#define MAX8660_LDO67_MAX_SEL 0x0f
|
||||
|
||||
enum {
|
||||
MAX8660_OVER1,
|
||||
MAX8660_OVER2,
|
||||
MAX8660_VCC1,
|
||||
MAX8660_ADTV1,
|
||||
MAX8660_ADTV2,
|
||||
MAX8660_SDTV1,
|
||||
MAX8660_SDTV2,
|
||||
MAX8660_MDTV1,
|
||||
MAX8660_MDTV2,
|
||||
MAX8660_L12VCR,
|
||||
MAX8660_FPWM,
|
||||
MAX8660_N_REGS, /* not a real register */
|
||||
};
|
||||
|
||||
struct max8660 {
|
||||
struct i2c_client *client;
|
||||
u8 shadow_regs[MAX8660_N_REGS]; /* as chip is write only */
|
||||
struct regulator_dev *rdev[];
|
||||
};
|
||||
|
||||
static int max8660_write(struct max8660 *max8660, u8 reg, u8 mask, u8 val)
|
||||
{
|
||||
static const u8 max8660_addresses[MAX8660_N_REGS] =
|
||||
{ 0x10, 0x12, 0x20, 0x23, 0x24, 0x29, 0x2a, 0x32, 0x33, 0x39, 0x80 };
|
||||
|
||||
int ret;
|
||||
u8 reg_val = (max8660->shadow_regs[reg] & mask) | val;
|
||||
dev_vdbg(&max8660->client->dev, "Writing reg %02x with %02x\n",
|
||||
max8660_addresses[reg], reg_val);
|
||||
|
||||
ret = i2c_smbus_write_byte_data(max8660->client,
|
||||
max8660_addresses[reg], reg_val);
|
||||
if (ret == 0)
|
||||
max8660->shadow_regs[reg] = reg_val;
|
||||
|
||||
return ret;
|
||||
}
|
||||
|
||||
|
||||
/*
|
||||
* DCDC functions
|
||||
*/
|
||||
|
||||
static int max8660_dcdc_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 val = max8660->shadow_regs[MAX8660_OVER1];
|
||||
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
|
||||
return !!(val & mask);
|
||||
}
|
||||
|
||||
static int max8660_dcdc_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 bit = (rdev_get_id(rdev) == MAX8660_V3) ? 1 : 4;
|
||||
return max8660_write(max8660, MAX8660_OVER1, 0xff, bit);
|
||||
}
|
||||
|
||||
static int max8660_dcdc_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 mask = (rdev_get_id(rdev) == MAX8660_V3) ? ~1 : ~4;
|
||||
return max8660_write(max8660, MAX8660_OVER1, mask, 0);
|
||||
}
|
||||
|
||||
static int max8660_dcdc_list(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
if (selector > MAX8660_DCDC_MAX_SEL)
|
||||
return -EINVAL;
|
||||
return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP;
|
||||
}
|
||||
|
||||
static int max8660_dcdc_get(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
|
||||
u8 selector = max8660->shadow_regs[reg];
|
||||
return MAX8660_DCDC_MIN_UV + selector * MAX8660_DCDC_STEP;
|
||||
}
|
||||
|
||||
static int max8660_dcdc_set(struct regulator_dev *rdev, int min_uV, int max_uV)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 reg, selector, bits;
|
||||
int ret;
|
||||
|
||||
if (min_uV < MAX8660_DCDC_MIN_UV || min_uV > MAX8660_DCDC_MAX_UV)
|
||||
return -EINVAL;
|
||||
if (max_uV < MAX8660_DCDC_MIN_UV || max_uV > MAX8660_DCDC_MAX_UV)
|
||||
return -EINVAL;
|
||||
|
||||
selector = (min_uV - (MAX8660_DCDC_MIN_UV - MAX8660_DCDC_STEP + 1))
|
||||
/ MAX8660_DCDC_STEP;
|
||||
|
||||
ret = max8660_dcdc_list(rdev, selector);
|
||||
if (ret < 0 || ret > max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
reg = (rdev_get_id(rdev) == MAX8660_V3) ? MAX8660_ADTV2 : MAX8660_SDTV2;
|
||||
ret = max8660_write(max8660, reg, 0, selector);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Select target voltage register and activate regulation */
|
||||
bits = (rdev_get_id(rdev) == MAX8660_V3) ? 0x03 : 0x30;
|
||||
return max8660_write(max8660, MAX8660_VCC1, 0xff, bits);
|
||||
}
|
||||
|
||||
static struct regulator_ops max8660_dcdc_ops = {
|
||||
.is_enabled = max8660_dcdc_is_enabled,
|
||||
.list_voltage = max8660_dcdc_list,
|
||||
.set_voltage = max8660_dcdc_set,
|
||||
.get_voltage = max8660_dcdc_get,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* LDO5 functions
|
||||
*/
|
||||
|
||||
static int max8660_ldo5_list(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
if (selector > MAX8660_LDO5_MAX_SEL)
|
||||
return -EINVAL;
|
||||
return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP;
|
||||
}
|
||||
|
||||
static int max8660_ldo5_get(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 selector = max8660->shadow_regs[MAX8660_MDTV2];
|
||||
|
||||
return MAX8660_LDO5_MIN_UV + selector * MAX8660_LDO5_STEP;
|
||||
}
|
||||
|
||||
static int max8660_ldo5_set(struct regulator_dev *rdev, int min_uV, int max_uV)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 selector;
|
||||
int ret;
|
||||
|
||||
if (min_uV < MAX8660_LDO5_MIN_UV || min_uV > MAX8660_LDO5_MAX_UV)
|
||||
return -EINVAL;
|
||||
if (max_uV < MAX8660_LDO5_MIN_UV || max_uV > MAX8660_LDO5_MAX_UV)
|
||||
return -EINVAL;
|
||||
|
||||
selector = (min_uV - (MAX8660_LDO5_MIN_UV - MAX8660_LDO5_STEP + 1))
|
||||
/ MAX8660_LDO5_STEP;
|
||||
ret = max8660_ldo5_list(rdev, selector);
|
||||
if (ret < 0 || ret > max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
ret = max8660_write(max8660, MAX8660_MDTV2, 0, selector);
|
||||
if (ret)
|
||||
return ret;
|
||||
|
||||
/* Select target voltage register and activate regulation */
|
||||
return max8660_write(max8660, MAX8660_VCC1, 0xff, 0xc0);
|
||||
}
|
||||
|
||||
static struct regulator_ops max8660_ldo5_ops = {
|
||||
.list_voltage = max8660_ldo5_list,
|
||||
.set_voltage = max8660_ldo5_set,
|
||||
.get_voltage = max8660_ldo5_get,
|
||||
};
|
||||
|
||||
|
||||
/*
|
||||
* LDO67 functions
|
||||
*/
|
||||
|
||||
static int max8660_ldo67_is_enabled(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 val = max8660->shadow_regs[MAX8660_OVER2];
|
||||
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
|
||||
return !!(val & mask);
|
||||
}
|
||||
|
||||
static int max8660_ldo67_enable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 bit = (rdev_get_id(rdev) == MAX8660_V6) ? 2 : 4;
|
||||
return max8660_write(max8660, MAX8660_OVER2, 0xff, bit);
|
||||
}
|
||||
|
||||
static int max8660_ldo67_disable(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 mask = (rdev_get_id(rdev) == MAX8660_V6) ? ~2 : ~4;
|
||||
return max8660_write(max8660, MAX8660_OVER2, mask, 0);
|
||||
}
|
||||
|
||||
static int max8660_ldo67_list(struct regulator_dev *rdev, unsigned selector)
|
||||
{
|
||||
if (selector > MAX8660_LDO67_MAX_SEL)
|
||||
return -EINVAL;
|
||||
return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP;
|
||||
}
|
||||
|
||||
static int max8660_ldo67_get(struct regulator_dev *rdev)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 shift = (rdev_get_id(rdev) == MAX8660_V6) ? 0 : 4;
|
||||
u8 selector = (max8660->shadow_regs[MAX8660_L12VCR] >> shift) & 0xf;
|
||||
|
||||
return MAX8660_LDO67_MIN_UV + selector * MAX8660_LDO67_STEP;
|
||||
}
|
||||
|
||||
static int max8660_ldo67_set(struct regulator_dev *rdev, int min_uV, int max_uV)
|
||||
{
|
||||
struct max8660 *max8660 = rdev_get_drvdata(rdev);
|
||||
u8 selector;
|
||||
int ret;
|
||||
|
||||
if (min_uV < MAX8660_LDO67_MIN_UV || min_uV > MAX8660_LDO67_MAX_UV)
|
||||
return -EINVAL;
|
||||
if (max_uV < MAX8660_LDO67_MIN_UV || max_uV > MAX8660_LDO67_MAX_UV)
|
||||
return -EINVAL;
|
||||
|
||||
selector = (min_uV - (MAX8660_LDO67_MIN_UV - MAX8660_LDO67_STEP + 1))
|
||||
/ MAX8660_LDO67_STEP;
|
||||
|
||||
ret = max8660_ldo67_list(rdev, selector);
|
||||
if (ret < 0 || ret > max_uV)
|
||||
return -EINVAL;
|
||||
|
||||
if (rdev_get_id(rdev) == MAX8660_V6)
|
||||
return max8660_write(max8660, MAX8660_L12VCR, 0xf0, selector);
|
||||
else
|
||||
return max8660_write(max8660, MAX8660_L12VCR, 0x0f, selector << 4);
|
||||
}
|
||||
|
||||
static struct regulator_ops max8660_ldo67_ops = {
|
||||
.is_enabled = max8660_ldo67_is_enabled,
|
||||
.enable = max8660_ldo67_enable,
|
||||
.disable = max8660_ldo67_disable,
|
||||
.list_voltage = max8660_ldo67_list,
|
||||
.get_voltage = max8660_ldo67_get,
|
||||
.set_voltage = max8660_ldo67_set,
|
||||
};
|
||||
|
||||
static struct regulator_desc max8660_reg[] = {
|
||||
{
|
||||
.name = "V3(DCDC)",
|
||||
.id = MAX8660_V3,
|
||||
.ops = &max8660_dcdc_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "V4(DCDC)",
|
||||
.id = MAX8660_V4,
|
||||
.ops = &max8660_dcdc_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX8660_DCDC_MAX_SEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "V5(LDO)",
|
||||
.id = MAX8660_V5,
|
||||
.ops = &max8660_ldo5_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX8660_LDO5_MAX_SEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "V6(LDO)",
|
||||
.id = MAX8660_V6,
|
||||
.ops = &max8660_ldo67_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
{
|
||||
.name = "V7(LDO)",
|
||||
.id = MAX8660_V7,
|
||||
.ops = &max8660_ldo67_ops,
|
||||
.type = REGULATOR_VOLTAGE,
|
||||
.n_voltages = MAX8660_LDO67_MAX_SEL + 1,
|
||||
.owner = THIS_MODULE,
|
||||
},
|
||||
};
|
||||
|
||||
static int max8660_probe(struct i2c_client *client,
|
||||
const struct i2c_device_id *i2c_id)
|
||||
{
|
||||
struct regulator_dev **rdev;
|
||||
struct max8660_platform_data *pdata = client->dev.platform_data;
|
||||
struct max8660 *max8660;
|
||||
int boot_on, i, id, ret = -EINVAL;
|
||||
|
||||
if (pdata->num_subdevs > MAX8660_V_END) {
|
||||
dev_err(&client->dev, "Too much regulators found!\n");
|
||||
goto out;
|
||||
}
|
||||
|
||||
max8660 = kzalloc(sizeof(struct max8660) +
|
||||
sizeof(struct regulator_dev *) * MAX8660_V_END,
|
||||
GFP_KERNEL);
|
||||
if (!max8660) {
|
||||
ret = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
|
||||
max8660->client = client;
|
||||
rdev = max8660->rdev;
|
||||
|
||||
if (pdata->en34_is_high) {
|
||||
/* Simulate always on */
|
||||
max8660->shadow_regs[MAX8660_OVER1] = 5;
|
||||
} else {
|
||||
/* Otherwise devices can be toggled via software */
|
||||
max8660_dcdc_ops.enable = max8660_dcdc_enable;
|
||||
max8660_dcdc_ops.disable = max8660_dcdc_disable;
|
||||
}
|
||||
|
||||
/*
|
||||
* First, set up shadow registers to prevent glitches. As some
|
||||
* registers are shared between regulators, everything must be properly
|
||||
* set up for all regulators in advance.
|
||||
*/
|
||||
max8660->shadow_regs[MAX8660_ADTV1] =
|
||||
max8660->shadow_regs[MAX8660_ADTV2] =
|
||||
max8660->shadow_regs[MAX8660_SDTV1] =
|
||||
max8660->shadow_regs[MAX8660_SDTV2] = 0x1b;
|
||||
max8660->shadow_regs[MAX8660_MDTV1] =
|
||||
max8660->shadow_regs[MAX8660_MDTV2] = 0x04;
|
||||
|
||||
for (i = 0; i < pdata->num_subdevs; i++) {
|
||||
|
||||
if (!pdata->subdevs[i].platform_data)
|
||||
goto err_free;
|
||||
|
||||
boot_on = pdata->subdevs[i].platform_data->constraints.boot_on;
|
||||
|
||||
switch (pdata->subdevs[i].id) {
|
||||
case MAX8660_V3:
|
||||
if (boot_on)
|
||||
max8660->shadow_regs[MAX8660_OVER1] |= 1;
|
||||
break;
|
||||
|
||||
case MAX8660_V4:
|
||||
if (boot_on)
|
||||
max8660->shadow_regs[MAX8660_OVER1] |= 4;
|
||||
break;
|
||||
|
||||
case MAX8660_V5:
|
||||
break;
|
||||
|
||||
case MAX8660_V6:
|
||||
if (boot_on)
|
||||
max8660->shadow_regs[MAX8660_OVER2] |= 2;
|
||||
break;
|
||||
|
||||
case MAX8660_V7:
|
||||
if (!strcmp(i2c_id->name, "max8661")) {
|
||||
dev_err(&client->dev, "Regulator not on this chip!\n");
|
||||
goto err_free;
|
||||
}
|
||||
|
||||
if (boot_on)
|
||||
max8660->shadow_regs[MAX8660_OVER2] |= 4;
|
||||
break;
|
||||
|
||||
default:
|
||||
dev_err(&client->dev, "invalid regulator %s\n",
|
||||
pdata->subdevs[i].name);
|
||||
goto err_free;
|
||||
}
|
||||
}
|
||||
|
||||
/* Finally register devices */
|
||||
for (i = 0; i < pdata->num_subdevs; i++) {
|
||||
|
||||
id = pdata->subdevs[i].id;
|
||||
|
||||
rdev[i] = regulator_register(&max8660_reg[id], &client->dev,
|
||||
pdata->subdevs[i].platform_data,
|
||||
max8660);
|
||||
if (IS_ERR(rdev[i])) {
|
||||
ret = PTR_ERR(rdev[i]);
|
||||
dev_err(&client->dev, "failed to register %s\n",
|
||||
max8660_reg[id].name);
|
||||
goto err_unregister;
|
||||
}
|
||||
}
|
||||
|
||||
i2c_set_clientdata(client, rdev);
|
||||
dev_info(&client->dev, "Maxim 8660/8661 regulator driver loaded\n");
|
||||
return 0;
|
||||
|
||||
err_unregister:
|
||||
while (--i >= 0)
|
||||
regulator_unregister(rdev[i]);
|
||||
err_free:
|
||||
kfree(max8660);
|
||||
out:
|
||||
return ret;
|
||||
}
|
||||
|
||||
static int max8660_remove(struct i2c_client *client)
|
||||
{
|
||||
struct regulator_dev **rdev = i2c_get_clientdata(client);
|
||||
int i;
|
||||
|
||||
for (i = 0; i < MAX8660_V_END; i++)
|
||||
if (rdev[i])
|
||||
regulator_unregister(rdev[i]);
|
||||
kfree(rdev);
|
||||
i2c_set_clientdata(client, NULL);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static const struct i2c_device_id max8660_id[] = {
|
||||
{ "max8660", 0 },
|
||||
{ "max8661", 0 },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(i2c, max8660_id);
|
||||
|
||||
static struct i2c_driver max8660_driver = {
|
||||
.probe = max8660_probe,
|
||||
.remove = max8660_remove,
|
||||
.driver = {
|
||||
.name = "max8660",
|
||||
},
|
||||
.id_table = max8660_id,
|
||||
};
|
||||
|
||||
static int __init max8660_init(void)
|
||||
{
|
||||
return i2c_add_driver(&max8660_driver);
|
||||
}
|
||||
subsys_initcall(max8660_init);
|
||||
|
||||
static void __exit max8660_exit(void)
|
||||
{
|
||||
i2c_del_driver(&max8660_driver);
|
||||
}
|
||||
module_exit(max8660_exit);
|
||||
|
||||
/* Module information */
|
||||
MODULE_DESCRIPTION("MAXIM 8660/8661 voltage regulator driver");
|
||||
MODULE_AUTHOR("Wolfram Sang");
|
||||
MODULE_LICENSE("GPL v2");
|
||||
|
|
@ -0,0 +1,57 @@
|
|||
/*
|
||||
* max8660.h -- Voltage regulation for the Maxim 8660/8661
|
||||
*
|
||||
* Copyright (C) 2009 Wolfram Sang, Pengutronix e.K.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation; version 2 of the License.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program; if not, write to the Free Software
|
||||
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
|
||||
*/
|
||||
|
||||
#ifndef __LINUX_REGULATOR_MAX8660_H
|
||||
#define __LINUX_REGULATOR_MAX8660_H
|
||||
|
||||
#include <linux/regulator/machine.h>
|
||||
|
||||
enum {
|
||||
MAX8660_V3,
|
||||
MAX8660_V4,
|
||||
MAX8660_V5,
|
||||
MAX8660_V6,
|
||||
MAX8660_V7,
|
||||
MAX8660_V_END,
|
||||
};
|
||||
|
||||
/**
|
||||
* max8660_subdev_data - regulator subdev data
|
||||
* @id: regulator id
|
||||
* @name: regulator name
|
||||
* @platform_data: regulator init data
|
||||
*/
|
||||
struct max8660_subdev_data {
|
||||
int id;
|
||||
char *name;
|
||||
struct regulator_init_data *platform_data;
|
||||
};
|
||||
|
||||
/**
|
||||
* max8660_platform_data - platform data for max8660
|
||||
* @num_subdevs: number of regulators used
|
||||
* @subdevs: pointer to regulators used
|
||||
* @en34_is_high: if EN34 is driven high, regulators cannot be en-/disabled.
|
||||
*/
|
||||
struct max8660_platform_data {
|
||||
int num_subdevs;
|
||||
struct max8660_subdev_data *subdevs;
|
||||
unsigned en34_is_high:1;
|
||||
};
|
||||
#endif
|
||||
Загрузка…
Ссылка в новой задаче