ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
This patch adds basic DT for Microchip lan966x SoC and associated board pcb8291(2-port EVB). Adds peripherals required to allow booting: Interrupt Controller, Clock, Generic ARMv7 Timers, Synopsys Timer, Flexcoms, GPIOs. Also adds other peripherals like crypto(AES/SHA), DMA, Watchdog Timer, TRNG and MCAN0. Signed-off-by: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com> Reviewed-by: Michael Walle <michael@walle.cc> Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com> Link: https://lore.kernel.org/r/20220221080858.14233-1-kavyasree.kotagiri@microchip.com
This commit is contained in:
Kavyasree Kotagiri
Nicolas Ferre
Родитель
e783362eb5
Коммит
290deaa10c
|
|
@ -735,6 +735,8 @@ dtb-$(CONFIG_SOC_IMX7D) += \
|
|||
dtb-$(CONFIG_SOC_IMX7ULP) += \
|
||||
imx7ulp-com.dtb \
|
||||
imx7ulp-evk.dtb
|
||||
dtb-$(CONFIG_SOC_LAN966) += \
|
||||
lan966x-pcb8291.dtb
|
||||
dtb-$(CONFIG_SOC_LS1021A) += \
|
||||
ls1021a-moxa-uc-8410a.dtb \
|
||||
ls1021a-qds.dtb \
|
||||
|
|
|
|||
|
|
@ -0,0 +1,64 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* lan966x_pcb8291.dts - Device Tree file for PCB8291
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "lan966x.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Microchip EVB - LAN9662";
|
||||
compatible = "microchip,lan9662-pcb8291", "microchip,lan9662", "microchip,lan966";
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
aliases {
|
||||
serial0 = &usart3;
|
||||
};
|
||||
};
|
||||
|
||||
&gpio {
|
||||
fc_shrd7_pins: fc_shrd7-pins {
|
||||
pins = "GPIO_49";
|
||||
function = "fc_shrd7";
|
||||
};
|
||||
|
||||
fc_shrd8_pins: fc_shrd8-pins {
|
||||
pins = "GPIO_54";
|
||||
function = "fc_shrd8";
|
||||
};
|
||||
|
||||
fc3_b_pins: fcb3-spi-pins {
|
||||
/* SCK, RXD, TXD */
|
||||
pins = "GPIO_51", "GPIO_52", "GPIO_53";
|
||||
function = "fc3_b";
|
||||
};
|
||||
|
||||
can0_b_pins: can0_b_pins {
|
||||
/* RX, TX */
|
||||
pins = "GPIO_35", "GPIO_36";
|
||||
function = "can0_b";
|
||||
};
|
||||
};
|
||||
|
||||
&can0 {
|
||||
pinctrl-0 = <&can0_b_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&flx3 {
|
||||
atmel,flexcom-mode = <ATMEL_FLEXCOM_MODE_USART>;
|
||||
status = "okay";
|
||||
|
||||
usart3: serial@200 {
|
||||
pinctrl-0 = <&fc3_b_pins>, <&fc_shrd7_pins>, <&fc_shrd8_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,237 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
|
||||
/*
|
||||
* lan966x.dtsi - Device Tree Include file for Microchip LAN966 family SoC
|
||||
*
|
||||
* Copyright (C) 2021 Microchip Technology, Inc. and its subsidiaries
|
||||
*
|
||||
* Author: Kavyasree Kotagiri <kavyasree.kotagiri@microchip.com>
|
||||
*
|
||||
*/
|
||||
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
#include <dt-bindings/interrupt-controller/arm-gic.h>
|
||||
#include <dt-bindings/mfd/atmel-flexcom.h>
|
||||
#include <dt-bindings/dma/at91.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
#include <dt-bindings/clock/microchip,lan966x.h>
|
||||
|
||||
/ {
|
||||
model = "Microchip LAN966 family SoC";
|
||||
compatible = "microchip,lan966";
|
||||
interrupt-parent = <&gic>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
cpu@0 {
|
||||
device_type = "cpu";
|
||||
compatible = "arm,cortex-a7";
|
||||
clock-frequency = <600000000>;
|
||||
reg = <0x0>;
|
||||
};
|
||||
};
|
||||
|
||||
clocks {
|
||||
sys_clk: sys_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <162500000>;
|
||||
};
|
||||
|
||||
cpu_clk: cpu_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <600000000>;
|
||||
};
|
||||
|
||||
ddr_clk: ddr_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <300000000>;
|
||||
};
|
||||
|
||||
nic_clk: nic_clk {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <200000000>;
|
||||
};
|
||||
};
|
||||
|
||||
clks: clock-controller@e00c00a8 {
|
||||
compatible = "microchip,lan966x-gck";
|
||||
#clock-cells = <1>;
|
||||
clocks = <&cpu_clk>, <&ddr_clk>, <&sys_clk>;
|
||||
clock-names = "cpu", "ddr", "sys";
|
||||
reg = <0xe00c00a8 0x38>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupt-parent = <&gic>;
|
||||
interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
|
||||
<GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
|
||||
clock-frequency = <37500000>;
|
||||
};
|
||||
|
||||
soc {
|
||||
compatible = "simple-bus";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
flx0: flexcom@e0040000 {
|
||||
compatible = "atmel,sama5d2-flexcom";
|
||||
reg = <0xe0040000 0x100>;
|
||||
clocks = <&clks GCK_ID_FLEXCOM0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xe0040000 0x800>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
flx1: flexcom@e0044000 {
|
||||
compatible = "atmel,sama5d2-flexcom";
|
||||
reg = <0xe0044000 0x100>;
|
||||
clocks = <&clks GCK_ID_FLEXCOM1>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xe0044000 0x800>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
trng: rng@e0048000 {
|
||||
compatible = "atmel,at91sam9g45-trng";
|
||||
reg = <0xe0048000 0x100>;
|
||||
clocks = <&nic_clk>;
|
||||
};
|
||||
|
||||
aes: crypto@e004c000 {
|
||||
compatible = "atmel,at91sam9g46-aes";
|
||||
reg = <0xe004c000 0x100>;
|
||||
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dma0 AT91_XDMAC_DT_PERID(13)>,
|
||||
<&dma0 AT91_XDMAC_DT_PERID(12)>;
|
||||
dma-names = "rx", "tx";
|
||||
clocks = <&nic_clk>;
|
||||
clock-names = "aes_clk";
|
||||
};
|
||||
|
||||
flx2: flexcom@e0060000 {
|
||||
compatible = "atmel,sama5d2-flexcom";
|
||||
reg = <0xe0060000 0x100>;
|
||||
clocks = <&clks GCK_ID_FLEXCOM2>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xe0060000 0x800>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
flx3: flexcom@e0064000 {
|
||||
compatible = "atmel,sama5d2-flexcom";
|
||||
reg = <0xe0064000 0x100>;
|
||||
clocks = <&clks GCK_ID_FLEXCOM3>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xe0064000 0x800>;
|
||||
status = "disabled";
|
||||
|
||||
usart3: serial@200 {
|
||||
compatible = "atmel,at91sam9260-usart";
|
||||
reg = <0x200 0x200>;
|
||||
interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&nic_clk>;
|
||||
clock-names = "usart";
|
||||
atmel,fifo-size = <32>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
dma0: dma-controller@e0068000 {
|
||||
compatible = "microchip,sama7g5-dma";
|
||||
reg = <0xe0068000 0x1000>;
|
||||
interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#dma-cells = <1>;
|
||||
clocks = <&nic_clk>;
|
||||
clock-names = "dma_clk";
|
||||
};
|
||||
|
||||
sha: crypto@e006c000 {
|
||||
compatible = "atmel,at91sam9g46-sha";
|
||||
reg = <0xe006c000 0xec>;
|
||||
interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
|
||||
dmas = <&dma0 AT91_XDMAC_DT_PERID(14)>;
|
||||
dma-names = "tx";
|
||||
clocks = <&nic_clk>;
|
||||
clock-names = "sha_clk";
|
||||
};
|
||||
|
||||
flx4: flexcom@e0070000 {
|
||||
compatible = "atmel,sama5d2-flexcom";
|
||||
reg = <0xe0070000 0x100>;
|
||||
clocks = <&clks GCK_ID_FLEXCOM4>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0x0 0xe0070000 0x800>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
timer0: timer@e008c000 {
|
||||
compatible = "snps,dw-apb-timer";
|
||||
reg = <0xe008c000 0x400>;
|
||||
clocks = <&nic_clk>;
|
||||
clock-names = "timer";
|
||||
interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
watchdog: watchdog@e0090000 {
|
||||
compatible = "snps,dw-wdt";
|
||||
reg = <0xe0090000 0x1000>;
|
||||
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
|
||||
clocks = <&nic_clk>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
can0: can@e081c000 {
|
||||
compatible = "bosch,m_can";
|
||||
reg = <0xe081c000 0xfc>, <0x00100000 0x4000>;
|
||||
reg-names = "m_can", "message_ram";
|
||||
interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
|
||||
<GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-names = "int0", "int1";
|
||||
clocks = <&clks GCK_ID_MCAN0>, <&clks GCK_ID_MCAN0>;
|
||||
clock-names = "hclk", "cclk";
|
||||
assigned-clocks = <&clks GCK_ID_MCAN0>;
|
||||
assigned-clock-rates = <40000000>;
|
||||
bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
gpio: pinctrl@e2004064 {
|
||||
compatible = "microchip,lan966x-pinctrl";
|
||||
reg = <0xe2004064 0xb4>,
|
||||
<0xe2010024 0x138>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
gpio-ranges = <&gpio 0 0 78>;
|
||||
interrupt-controller;
|
||||
interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
#interrupt-cells = <2>;
|
||||
};
|
||||
|
||||
gic: interrupt-controller@e8c11000 {
|
||||
compatible = "arm,gic-400", "arm,cortex-a7-gic";
|
||||
#interrupt-cells = <3>;
|
||||
interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupt-controller;
|
||||
reg = <0xe8c11000 0x1000>,
|
||||
<0xe8c12000 0x2000>,
|
||||
<0xe8c14000 0x2000>,
|
||||
<0xe8c16000 0x2000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче