Merge branch 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux into drm-next

Pull in first set of changes from Ben for ast on ppc.

I've done a quick boot test on x86 and it still seems to boot.

* 'drm-next-ast-fixes' of ssh://people.freedesktop.org/~/linux:
  drm/ast: Cleanup analog init code path
  drm/ast: Don't assume DVO enabled means SIL164 on uninitialized chips
  drm/ast: Properly initialize P2A base before using it in ast_init_3rdtx()
  drm/ast: POST chip at probe time if VGA not enabled
  drm/ast: Try to use MMIO registers when PIO isn't supported

drivers/gpu/drm/ast/ast_dp501.c

@@ -379,11 +379,39 @@ static bool ast_init_dvo(struct drm_device *dev)
 	return true;
 }
 
+
+static void ast_init_analog(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+	u32 data;
+
+	/*
+	 * Set DAC source to VGA mode in SCU2C via the P2A
+	 * bridge. First configure the P2U to target the SCU
+	 * in case it isn't at this stage.
+	 */
+	ast_write32(ast, 0xf004, 0x1e6e0000);
+	ast_write32(ast, 0xf000, 0x1);
+
+	/* Then unlock the SCU with the magic password */
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+	ast_write32(ast, 0x12000, 0x1688a8a8);
+
+	/* Finally, clear bits [17:16] of SCU2c */
+	data = ast_read32(ast, 0x1202c);
+	data &= 0xfffcffff;
+	ast_write32(ast, 0, data);
+
+	/* Disable DVO */
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xcf, 0x00);
+}
+
 void ast_init_3rdtx(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 	u8 jreg;
-	u32 data;
+
 	if (ast->chip == AST2300 || ast->chip == AST2400) {
 		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
 		switch (jreg & 0x0e) {
@@ -399,12 +427,8 @@ void ast_init_3rdtx(struct drm_device *dev)
 		default:
 			if (ast->tx_chip_type == AST_TX_SIL164)
 				ast_init_dvo(dev);
-			else {
-				ast_write32(ast, 0x12000, 0x1688a8a8);
-				data = ast_read32(ast, 0x1202c);
-				data &= 0xfffcffff;
-				ast_write32(ast, 0, data);
-			}
+			else
+				ast_init_analog(dev);
 		}
 	}
 }

drivers/gpu/drm/ast/ast_drv.h

@@ -125,8 +125,9 @@ struct ast_gem_object;
 
 #define AST_IO_AR_PORT_WRITE		(0x40)
 #define AST_IO_MISC_PORT_WRITE		(0x42)
+#define AST_IO_VGA_ENABLE_PORT		(0x43)
 #define AST_IO_SEQ_PORT			(0x44)
-#define AST_DAC_INDEX_READ		(0x3c7)
+#define AST_IO_DAC_INDEX_READ		(0x47)
 #define AST_IO_DAC_INDEX_WRITE		(0x48)
 #define AST_IO_DAC_DATA		        (0x49)
 #define AST_IO_GR_PORT			(0x4E)
@@ -134,6 +135,8 @@ struct ast_gem_object;
 #define AST_IO_INPUT_STATUS1_READ	(0x5A)
 #define AST_IO_MISC_PORT_READ		(0x4C)
 
+#define AST_IO_MM_OFFSET		(0x380)
+
 #define __ast_read(x) \
 static inline u##x ast_read##x(struct ast_private *ast, u32 reg) { \
 u##x val = 0;\
@@ -381,6 +384,9 @@ int ast_bo_push_sysram(struct ast_bo *bo);
 int ast_mmap(struct file *filp, struct vm_area_struct *vma);
 
 /* ast post */
+void ast_enable_vga(struct drm_device *dev);
+void ast_enable_mmio(struct drm_device *dev);
+bool ast_is_vga_enabled(struct drm_device *dev);
 void ast_post_gpu(struct drm_device *dev);
 u32 ast_mindwm(struct ast_private *ast, u32 r);
 void ast_moutdwm(struct ast_private *ast, u32 r, u32 v);

drivers/gpu/drm/ast/ast_main.c

@@ -63,7 +63,7 @@ uint8_t ast_get_index_reg_mask(struct ast_private *ast,
 }
 
 
-static int ast_detect_chip(struct drm_device *dev)
+static int ast_detect_chip(struct drm_device *dev, bool *need_post)
 {
 	struct ast_private *ast = dev->dev_private;
 	uint32_t data, jreg;
@@ -110,6 +110,21 @@ static int ast_detect_chip(struct drm_device *dev)
 		}
 	}
 
+	/*
+	 * If VGA isn't enabled, we need to enable now or subsequent
+	 * access to the scratch registers will fail. We also inform
+	 * our caller that it needs to POST the chip
+	 * (Assumption: VGA not enabled -> need to POST)
+	 */
+	if (!ast_is_vga_enabled(dev)) {
+		ast_enable_vga(dev);
+		ast_enable_mmio(dev);
+		DRM_INFO("VGA not enabled on entry, requesting chip POST\n");
+		*need_post = true;
+	} else
+		*need_post = false;
+
+	/* Check if we support wide screen */
 	switch (ast->chip) {
 	case AST1180:
 		ast->support_wide_screen = true;
@@ -125,6 +140,7 @@ static int ast_detect_chip(struct drm_device *dev)
 			ast->support_wide_screen = true;
 		else {
 			ast->support_wide_screen = false;
+			/* Read SCU7c (silicon revision register) */
 			ast_write32(ast, 0xf004, 0x1e6e0000);
 			ast_write32(ast, 0xf000, 0x1);
 			data = ast_read32(ast, 0x1207c);
@@ -137,11 +153,29 @@ static int ast_detect_chip(struct drm_device *dev)
 		break;
 	}
 
+	/* Check 3rd Tx option (digital output afaik) */
 	ast->tx_chip_type = AST_TX_NONE;
-	jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
-	if (jreg & 0x80)
-		ast->tx_chip_type = AST_TX_SIL164;
+
+	/*
+	 * VGACRA3 Enhanced Color Mode Register, check if DVO is already
+	 * enabled, in that case, assume we have a SIL164 TMDS transmitter
+	 *
+	 * Don't make that assumption if we the chip wasn't enabled and
+	 * is at power-on reset, otherwise we'll incorrectly "detect" a
+	 * SIL164 when there is none.
+	 */
+	if (!*need_post) {
+		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa3, 0xff);
+		if (jreg & 0x80)
+			ast->tx_chip_type = AST_TX_SIL164;
+	}
+
 	if ((ast->chip == AST2300) || (ast->chip == AST2400)) {
+		/*
+		 * On AST2300 and 2400, look the configuration set by the SoC in
+		 * the SOC scratch register #1 bits 11:8 (interestingly marked
+		 * as "reserved" in the spec)
+		 */
 		jreg = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xd1, 0xff);
 		switch (jreg) {
 		case 0x04:
@@ -162,6 +196,17 @@ static int ast_detect_chip(struct drm_device *dev)
 		}
 	}
 
+	/* Print stuff for diagnostic purposes */
+	switch(ast->tx_chip_type) {
+	case AST_TX_SIL164:
+		DRM_INFO("Using Sil164 TMDS transmitter\n");
+		break;
+	case AST_TX_DP501:
+		DRM_INFO("Using DP501 DisplayPort transmitter\n");
+		break;
+	default:
+		DRM_INFO("Analog VGA only\n");
+	}
 	return 0;
 }
 
@@ -346,6 +391,7 @@ static u32 ast_get_vram_info(struct drm_device *dev)
 int ast_driver_load(struct drm_device *dev, unsigned long flags)
 {
 	struct ast_private *ast;
+	bool need_post;
 	int ret = 0;
 
 	ast = kzalloc(sizeof(struct ast_private), GFP_KERNEL);
@@ -360,13 +406,27 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 		ret = -EIO;
 		goto out_free;
 	}
-	ast->ioregs = pci_iomap(dev->pdev, 2, 0);
-	if (!ast->ioregs) {
-		ret = -EIO;
-		goto out_free;
+
+	/*
+	 * If we don't have IO space at all, use MMIO now and
+	 * assume the chip has MMIO enabled by default (rev 0x20
+	 * and higher).
+	 */
+	if (!(pci_resource_flags(dev->pdev, 2) & IORESOURCE_IO)) {
+		DRM_INFO("platform has no IO space, trying MMIO\n");
+		ast->ioregs = ast->regs + AST_IO_MM_OFFSET;
 	}
 
-	ast_detect_chip(dev);
+	/* "map" IO regs if the above hasn't done so already */
+	if (!ast->ioregs) {
+		ast->ioregs = pci_iomap(dev->pdev, 2, 0);
+		if (!ast->ioregs) {
+			ret = -EIO;
+			goto out_free;
+		}
+	}
+
+	ast_detect_chip(dev, &need_post);
 
 	if (ast->chip != AST1180) {
 		ast_get_dram_info(dev);
@@ -374,6 +434,9 @@ int ast_driver_load(struct drm_device *dev, unsigned long flags)
 		DRM_INFO("dram %d %d %d %08x\n", ast->mclk, ast->dram_type, ast->dram_bus_width, ast->vram_size);
 	}
 
+	if (need_post)
+		ast_post_gpu(dev);
+
 	ret = ast_mm_init(ast);
 	if (ret)
 		goto out_free;

drivers/gpu/drm/ast/ast_post.c

@@ -33,18 +33,23 @@
 
 static void ast_init_dram_2300(struct drm_device *dev);
 
-static void
-ast_enable_vga(struct drm_device *dev)
+void ast_enable_vga(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 
-	ast_io_write8(ast, 0x43, 0x01);
-	ast_io_write8(ast, 0x42, 0x01);
+	ast_io_write8(ast, AST_IO_VGA_ENABLE_PORT, 0x01);
+	ast_io_write8(ast, AST_IO_MISC_PORT_WRITE, 0x01);
 }
 
-#if 0 /* will use later */
-static bool
-ast_is_vga_enabled(struct drm_device *dev)
+void ast_enable_mmio(struct drm_device *dev)
+{
+	struct ast_private *ast = dev->dev_private;
+
+	ast_set_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xa1, 0xff, 0x04);
+}
+
+
+bool ast_is_vga_enabled(struct drm_device *dev)
 {
 	struct ast_private *ast = dev->dev_private;
 	u8 ch;
@@ -52,7 +57,7 @@ ast_is_vga_enabled(struct drm_device *dev)
 	if (ast->chip == AST1180) {
 		/* TODO 1180 */
 	} else {
-		ch = ast_io_read8(ast, 0x43);
+		ch = ast_io_read8(ast, AST_IO_VGA_ENABLE_PORT);
 		if (ch) {
 			ast_open_key(ast);
 			ch = ast_get_index_reg_mask(ast, AST_IO_CRTC_PORT, 0xb6, 0xff);
@@ -61,7 +66,6 @@ ast_is_vga_enabled(struct drm_device *dev)
 	}
 	return 0;
 }
-#endif
 
 static const u8 extreginfo[] = { 0x0f, 0x04, 0x1c, 0xff };
 static const u8 extreginfo_ast2300a0[] = { 0x0f, 0x04, 0x1c, 0xff };
@@ -371,6 +375,7 @@ void ast_post_gpu(struct drm_device *dev)
 	pci_write_config_dword(ast->dev->pdev, 0x04, reg);
 
 	ast_enable_vga(dev);
+	ast_enable_mmio(dev);
 	ast_open_key(ast);
 	ast_set_def_ext_reg(dev);