diff --git a/drivers/gpio/gpio-aspeed.c b/drivers/gpio/gpio-aspeed.c index e44d5de2a120..b966f5e28ebf 100644 --- a/drivers/gpio/gpio-aspeed.c +++ b/drivers/gpio/gpio-aspeed.c @@ -1114,6 +1114,7 @@ static const struct aspeed_gpio_config ast2500_config = static const struct aspeed_bank_props ast2600_bank_props[] = { /* input output */ + {4, 0xffffffff, 0x00ffffff}, /* Q/R/S/T */ {5, 0xffffffff, 0xffffff00}, /* U/V/W/X */ {6, 0x0000ffff, 0x0000ffff}, /* Y/Z */ { }, diff --git a/drivers/gpio/gpio-dwapb.c b/drivers/gpio/gpio-dwapb.c index a5b326754124..2a9046c0fb16 100644 --- a/drivers/gpio/gpio-dwapb.c +++ b/drivers/gpio/gpio-dwapb.c @@ -343,8 +343,8 @@ static int dwapb_irq_set_type(struct irq_data *d, u32 type) #ifdef CONFIG_PM_SLEEP static int dwapb_irq_set_wake(struct irq_data *d, unsigned int enable) { - struct irq_chip_generic *igc = irq_data_get_irq_chip_data(d); - struct dwapb_gpio *gpio = igc->private; + struct gpio_chip *gc = irq_data_get_irq_chip_data(d); + struct dwapb_gpio *gpio = to_dwapb_gpio(gc); struct dwapb_context *ctx = gpio->ports[0].ctx; irq_hw_number_t bit = irqd_to_hwirq(d); diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c index 6d59e3a43761..f7ceb2b11afc 100644 --- a/drivers/gpio/gpio-omap.c +++ b/drivers/gpio/gpio-omap.c @@ -1114,13 +1114,23 @@ static void omap_gpio_idle(struct gpio_bank *bank, bool may_lose_context) { struct device *dev = bank->chip.parent; void __iomem *base = bank->base; - u32 nowake; + u32 mask, nowake; bank->saved_datain = readl_relaxed(base + bank->regs->datain); if (!bank->enabled_non_wakeup_gpios) goto update_gpio_context_count; + /* Check for pending EDGE_FALLING, ignore EDGE_BOTH */ + mask = bank->enabled_non_wakeup_gpios & bank->context.fallingdetect; + mask &= ~bank->context.risingdetect; + bank->saved_datain |= mask; + + /* Check for pending EDGE_RISING, ignore EDGE_BOTH */ + mask = bank->enabled_non_wakeup_gpios & bank->context.risingdetect; + mask &= ~bank->context.fallingdetect; + bank->saved_datain &= ~mask; + if (!may_lose_context) goto update_gpio_context_count; diff --git a/drivers/gpio/gpio-pcie-idio-24.c b/drivers/gpio/gpio-pcie-idio-24.c index a68941d19ac6..2a07fd96707e 100644 --- a/drivers/gpio/gpio-pcie-idio-24.c +++ b/drivers/gpio/gpio-pcie-idio-24.c @@ -28,6 +28,47 @@ #include #include +/* + * PLX PEX8311 PCI LCS_INTCSR Interrupt Control/Status + * + * Bit: Description + * 0: Enable Interrupt Sources (Bit 0) + * 1: Enable Interrupt Sources (Bit 1) + * 2: Generate Internal PCI Bus Internal SERR# Interrupt + * 3: Mailbox Interrupt Enable + * 4: Power Management Interrupt Enable + * 5: Power Management Interrupt + * 6: Slave Read Local Data Parity Check Error Enable + * 7: Slave Read Local Data Parity Check Error Status + * 8: Internal PCI Wire Interrupt Enable + * 9: PCI Express Doorbell Interrupt Enable + * 10: PCI Abort Interrupt Enable + * 11: Local Interrupt Input Enable + * 12: Retry Abort Enable + * 13: PCI Express Doorbell Interrupt Active + * 14: PCI Abort Interrupt Active + * 15: Local Interrupt Input Active + * 16: Local Interrupt Output Enable + * 17: Local Doorbell Interrupt Enable + * 18: DMA Channel 0 Interrupt Enable + * 19: DMA Channel 1 Interrupt Enable + * 20: Local Doorbell Interrupt Active + * 21: DMA Channel 0 Interrupt Active + * 22: DMA Channel 1 Interrupt Active + * 23: Built-In Self-Test (BIST) Interrupt Active + * 24: Direct Master was the Bus Master during a Master or Target Abort + * 25: DMA Channel 0 was the Bus Master during a Master or Target Abort + * 26: DMA Channel 1 was the Bus Master during a Master or Target Abort + * 27: Target Abort after internal 256 consecutive Master Retrys + * 28: PCI Bus wrote data to LCS_MBOX0 + * 29: PCI Bus wrote data to LCS_MBOX1 + * 30: PCI Bus wrote data to LCS_MBOX2 + * 31: PCI Bus wrote data to LCS_MBOX3 + */ +#define PLX_PEX8311_PCI_LCS_INTCSR 0x68 +#define INTCSR_INTERNAL_PCI_WIRE BIT(8) +#define INTCSR_LOCAL_INPUT BIT(11) + /** * struct idio_24_gpio_reg - GPIO device registers structure * @out0_7: Read: FET Outputs 0-7 @@ -92,6 +133,7 @@ struct idio_24_gpio_reg { struct idio_24_gpio { struct gpio_chip chip; raw_spinlock_t lock; + __u8 __iomem *plx; struct idio_24_gpio_reg __iomem *reg; unsigned long irq_mask; }; @@ -334,13 +376,13 @@ static void idio_24_irq_mask(struct irq_data *data) unsigned long flags; const unsigned long bit_offset = irqd_to_hwirq(data) - 24; unsigned char new_irq_mask; - const unsigned long bank_offset = bit_offset/8 * 8; + const unsigned long bank_offset = bit_offset / 8; unsigned char cos_enable_state; raw_spin_lock_irqsave(&idio24gpio->lock, flags); - idio24gpio->irq_mask &= BIT(bit_offset); - new_irq_mask = idio24gpio->irq_mask >> bank_offset; + idio24gpio->irq_mask &= ~BIT(bit_offset); + new_irq_mask = idio24gpio->irq_mask >> bank_offset * 8; if (!new_irq_mask) { cos_enable_state = ioread8(&idio24gpio->reg->cos_enable); @@ -363,12 +405,12 @@ static void idio_24_irq_unmask(struct irq_data *data) unsigned long flags; unsigned char prev_irq_mask; const unsigned long bit_offset = irqd_to_hwirq(data) - 24; - const unsigned long bank_offset = bit_offset/8 * 8; + const unsigned long bank_offset = bit_offset / 8; unsigned char cos_enable_state; raw_spin_lock_irqsave(&idio24gpio->lock, flags); - prev_irq_mask = idio24gpio->irq_mask >> bank_offset; + prev_irq_mask = idio24gpio->irq_mask >> bank_offset * 8; idio24gpio->irq_mask |= BIT(bit_offset); if (!prev_irq_mask) { @@ -455,6 +497,7 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id) struct device *const dev = &pdev->dev; struct idio_24_gpio *idio24gpio; int err; + const size_t pci_plx_bar_index = 1; const size_t pci_bar_index = 2; const char *const name = pci_name(pdev); struct gpio_irq_chip *girq; @@ -469,12 +512,13 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id) return err; } - err = pcim_iomap_regions(pdev, BIT(pci_bar_index), name); + err = pcim_iomap_regions(pdev, BIT(pci_plx_bar_index) | BIT(pci_bar_index), name); if (err) { dev_err(dev, "Unable to map PCI I/O addresses (%d)\n", err); return err; } + idio24gpio->plx = pcim_iomap_table(pdev)[pci_plx_bar_index]; idio24gpio->reg = pcim_iomap_table(pdev)[pci_bar_index]; idio24gpio->chip.label = name; @@ -504,6 +548,12 @@ static int idio_24_probe(struct pci_dev *pdev, const struct pci_device_id *id) /* Software board reset */ iowrite8(0, &idio24gpio->reg->soft_reset); + /* + * enable PLX PEX8311 internal PCI wire interrupt and local interrupt + * input + */ + iowrite8((INTCSR_INTERNAL_PCI_WIRE | INTCSR_LOCAL_INPUT) >> 8, + idio24gpio->plx + PLX_PEX8311_PCI_LCS_INTCSR + 1); err = devm_gpiochip_add_data(dev, &idio24gpio->chip, idio24gpio); if (err) { diff --git a/drivers/gpio/gpio-sifive.c b/drivers/gpio/gpio-sifive.c index c54dd08f2cbf..d5eb9ca11901 100644 --- a/drivers/gpio/gpio-sifive.c +++ b/drivers/gpio/gpio-sifive.c @@ -183,7 +183,7 @@ static int sifive_gpio_probe(struct platform_device *pdev) return PTR_ERR(chip->regs); ngpio = of_irq_count(node); - if (ngpio >= SIFIVE_GPIO_MAX) { + if (ngpio > SIFIVE_GPIO_MAX) { dev_err(dev, "Too many GPIO interrupts (max=%d)\n", SIFIVE_GPIO_MAX); return -ENXIO; diff --git a/drivers/gpio/gpiolib-cdev.h b/drivers/gpio/gpiolib-cdev.h index cb41dd757338..b42644cbffb8 100644 --- a/drivers/gpio/gpiolib-cdev.h +++ b/drivers/gpio/gpiolib-cdev.h @@ -7,22 +7,7 @@ struct gpio_device; -#ifdef CONFIG_GPIO_CDEV - int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt); void gpiolib_cdev_unregister(struct gpio_device *gdev); -#else - -static inline int gpiolib_cdev_register(struct gpio_device *gdev, dev_t devt) -{ - return 0; -} - -static inline void gpiolib_cdev_unregister(struct gpio_device *gdev) -{ -} - -#endif /* CONFIG_GPIO_CDEV */ - #endif /* GPIOLIB_CDEV_H */ diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c index 3cdf9effc13a..089ddcaa9bc6 100644 --- a/drivers/gpio/gpiolib.c +++ b/drivers/gpio/gpiolib.c @@ -480,11 +480,23 @@ static void gpiodevice_release(struct device *dev) kfree(gdev); } +#ifdef CONFIG_GPIO_CDEV +#define gcdev_register(gdev, devt) gpiolib_cdev_register((gdev), (devt)) +#define gcdev_unregister(gdev) gpiolib_cdev_unregister((gdev)) +#else +/* + * gpiolib_cdev_register() indirectly calls device_add(), which is still + * required even when cdev is not selected. + */ +#define gcdev_register(gdev, devt) device_add(&(gdev)->dev) +#define gcdev_unregister(gdev) device_del(&(gdev)->dev) +#endif + static int gpiochip_setup_dev(struct gpio_device *gdev) { int ret; - ret = gpiolib_cdev_register(gdev, gpio_devt); + ret = gcdev_register(gdev, gpio_devt); if (ret) return ret; @@ -500,7 +512,7 @@ static int gpiochip_setup_dev(struct gpio_device *gdev) return 0; err_remove_device: - gpiolib_cdev_unregister(gdev); + gcdev_unregister(gdev); return ret; } @@ -825,7 +837,7 @@ void gpiochip_remove(struct gpio_chip *gc) * be removed, else it will be dangling until the last user is * gone. */ - gpiolib_cdev_unregister(gdev); + gcdev_unregister(gdev); put_device(&gdev->dev); } EXPORT_SYMBOL_GPL(gpiochip_remove); diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h index 07865c601099..2072c260f5d0 100644 --- a/include/uapi/linux/gpio.h +++ b/include/uapi/linux/gpio.h @@ -26,7 +26,7 @@ * struct gpiochip_info - Information about a certain GPIO chip * @name: the Linux kernel name of this GPIO chip * @label: a functional name for this GPIO chip, such as a product - * number, may be empty + * number, may be empty (i.e. label[0] == '\0') * @lines: number of GPIO lines on this chip */ struct gpiochip_info { @@ -98,7 +98,7 @@ struct gpio_v2_line_values { * identifying which field of the attribute union is in use. * @GPIO_V2_LINE_ATTR_ID_FLAGS: flags field is in use * @GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES: values field is in use - * @GPIO_V2_LINE_ATTR_ID_DEBOUNCE: debounce_period_us is in use + * @GPIO_V2_LINE_ATTR_ID_DEBOUNCE: debounce_period_us field is in use */ enum gpio_v2_line_attr_id { GPIO_V2_LINE_ATTR_ID_FLAGS = 1, @@ -110,17 +110,17 @@ enum gpio_v2_line_attr_id { * struct gpio_v2_line_attribute - a configurable attribute of a line * @id: attribute identifier with value from &enum gpio_v2_line_attr_id * @padding: reserved for future use and must be zero filled - * @flags: if id is GPIO_V2_LINE_ATTR_ID_FLAGS, the flags for the GPIO - * line, with values from enum gpio_v2_line_flag, such as - * GPIO_V2_LINE_FLAG_ACTIVE_LOW, GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed + * @flags: if id is %GPIO_V2_LINE_ATTR_ID_FLAGS, the flags for the GPIO + * line, with values from &enum gpio_v2_line_flag, such as + * %GPIO_V2_LINE_FLAG_ACTIVE_LOW, %GPIO_V2_LINE_FLAG_OUTPUT etc, added * together. This overrides the default flags contained in the &struct * gpio_v2_line_config for the associated line. - * @values: if id is GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap + * @values: if id is %GPIO_V2_LINE_ATTR_ID_OUTPUT_VALUES, a bitmap * containing the values to which the lines will be set, with each bit * number corresponding to the index into &struct * gpio_v2_line_request.offsets. - * @debounce_period_us: if id is GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the desired - * debounce period, in microseconds + * @debounce_period_us: if id is %GPIO_V2_LINE_ATTR_ID_DEBOUNCE, the + * desired debounce period, in microseconds */ struct gpio_v2_line_attribute { __u32 id; @@ -147,12 +147,12 @@ struct gpio_v2_line_config_attribute { /** * struct gpio_v2_line_config - Configuration for GPIO lines - * @flags: flags for the GPIO lines, with values from enum - * gpio_v2_line_flag, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW, - * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together. This is the default for + * @flags: flags for the GPIO lines, with values from &enum + * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW, + * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together. This is the default for * all requested lines but may be overridden for particular lines using - * attrs. - * @num_attrs: the number of attributes in attrs + * @attrs. + * @num_attrs: the number of attributes in @attrs * @padding: reserved for future use and must be zero filled * @attrs: the configuration attributes associated with the requested * lines. Any attribute should only be associated with a particular line @@ -175,17 +175,17 @@ struct gpio_v2_line_config { * "my-bitbanged-relay" * @config: requested configuration for the lines. * @num_lines: number of lines requested in this request, i.e. the number - * of valid fields in the GPIO_V2_LINES_MAX sized arrays, set to 1 to + * of valid fields in the %GPIO_V2_LINES_MAX sized arrays, set to 1 to * request a single line * @event_buffer_size: a suggested minimum number of line events that the * kernel should buffer. This is only relevant if edge detection is * enabled in the configuration. Note that this is only a suggested value * and the kernel may allocate a larger buffer or cap the size of the * buffer. If this field is zero then the buffer size defaults to a minimum - * of num_lines*16. + * of @num_lines * 16. * @padding: reserved for future use and must be zero filled * @fd: if successful this field will contain a valid anonymous file handle - * after a GPIO_GET_LINE_IOCTL operation, zero or negative value means + * after a %GPIO_GET_LINE_IOCTL operation, zero or negative value means * error */ struct gpio_v2_line_request { @@ -203,15 +203,16 @@ struct gpio_v2_line_request { * struct gpio_v2_line_info - Information about a certain GPIO line * @name: the name of this GPIO line, such as the output pin of the line on * the chip, a rail or a pin header name on a board, as specified by the - * GPIO chip, may be empty + * GPIO chip, may be empty (i.e. name[0] == '\0') * @consumer: a functional name for the consumer of this GPIO line as set * by whatever is using it, will be empty if there is no current user but * may also be empty if the consumer doesn't set this up - * @flags: flags for the GPIO line, such as GPIO_V2_LINE_FLAG_ACTIVE_LOW, - * GPIO_V2_LINE_FLAG_OUTPUT etc, OR:ed together * @offset: the local offset on this GPIO chip, fill this in when * requesting the line information from the kernel - * @num_attrs: the number of attributes in attrs + * @num_attrs: the number of attributes in @attrs + * @flags: flags for the GPIO lines, with values from &enum + * gpio_v2_line_flag, such as %GPIO_V2_LINE_FLAG_ACTIVE_LOW, + * %GPIO_V2_LINE_FLAG_OUTPUT etc, added together. * @attrs: the configuration attributes associated with the line * @padding: reserved for future use */ @@ -244,7 +245,7 @@ enum gpio_v2_line_changed_type { * of a GPIO line * @info: updated line information * @timestamp_ns: estimate of time of status change occurrence, in nanoseconds - * @event_type: the type of change with a value from enum + * @event_type: the type of change with a value from &enum * gpio_v2_line_changed_type * @padding: reserved for future use */ @@ -269,10 +270,10 @@ enum gpio_v2_line_event_id { /** * struct gpio_v2_line_event - The actual event being pushed to userspace * @timestamp_ns: best estimate of time of event occurrence, in nanoseconds. - * The timestamp_ns is read from CLOCK_MONOTONIC and is intended to allow the - * accurate measurement of the time between events. It does not provide + * The @timestamp_ns is read from %CLOCK_MONOTONIC and is intended to allow + * the accurate measurement of the time between events. It does not provide * the wall-clock time. - * @id: event identifier with value from enum gpio_v2_line_event_id + * @id: event identifier with value from &enum gpio_v2_line_event_id * @offset: the offset of the line that triggered the event * @seqno: the sequence number for this event in the sequence of events for * all the lines in this line request @@ -291,7 +292,7 @@ struct gpio_v2_line_event { }; /* - * ABI v1 + * ABI v1 * * This version of the ABI is deprecated. * Use the latest version of the ABI, defined above, instead. @@ -314,13 +315,13 @@ struct gpio_v2_line_event { * @flags: various flags for this line * @name: the name of this GPIO line, such as the output pin of the line on the * chip, a rail or a pin header name on a board, as specified by the gpio - * chip, may be empty + * chip, may be empty (i.e. name[0] == '\0') * @consumer: a functional name for the consumer of this GPIO line as set by * whatever is using it, will be empty if there is no current user but may * also be empty if the consumer doesn't set this up * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_info instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_info instead. */ struct gpioline_info { __u32 line_offset; @@ -344,17 +345,18 @@ enum { * of a GPIO line * @info: updated line information * @timestamp: estimate of time of status change occurrence, in nanoseconds - * @event_type: one of GPIOLINE_CHANGED_REQUESTED, GPIOLINE_CHANGED_RELEASED - * and GPIOLINE_CHANGED_CONFIG + * @event_type: one of %GPIOLINE_CHANGED_REQUESTED, + * %GPIOLINE_CHANGED_RELEASED and %GPIOLINE_CHANGED_CONFIG + * @padding: reserved for future use * - * Note: struct gpioline_info embedded here has 32-bit alignment on its own, + * The &struct gpioline_info embedded here has 32-bit alignment on its own, * but it works fine with 64-bit alignment too. With its 72 byte size, we can * guarantee there are no implicit holes between it and subsequent members. * The 20-byte padding at the end makes sure we don't add any implicit padding * at the end of the structure on 64-bit architectures. * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_info_changed instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_info_changed instead. */ struct gpioline_info_changed { struct gpioline_info info; @@ -378,13 +380,13 @@ struct gpioline_info_changed { * @lineoffsets: an array of desired lines, specified by offset index for the * associated GPIO device * @flags: desired flags for the desired GPIO lines, such as - * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed + * %GPIOHANDLE_REQUEST_OUTPUT, %GPIOHANDLE_REQUEST_ACTIVE_LOW etc, added * together. Note that even if multiple lines are requested, the same flags * must be applicable to all of them, if you want lines with individual * flags set, request them one by one. It is possible to select * a batch of input or output lines, but they must all have the same * characteristics, i.e. all inputs or all outputs, all active low etc - * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set for a requested + * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set for a requested * line, this specifies the default output value, should be 0 (low) or * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) * @consumer_label: a desired consumer label for the selected GPIO line(s) @@ -392,11 +394,11 @@ struct gpioline_info_changed { * @lines: number of lines requested in this request, i.e. the number of * valid fields in the above arrays, set to 1 to request a single line * @fd: if successful this field will contain a valid anonymous file handle - * after a GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value + * after a %GPIO_GET_LINEHANDLE_IOCTL operation, zero or negative value * means error * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_request instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_request instead. */ struct gpiohandle_request { __u32 lineoffsets[GPIOHANDLES_MAX]; @@ -410,15 +412,15 @@ struct gpiohandle_request { /** * struct gpiohandle_config - Configuration for a GPIO handle request * @flags: updated flags for the requested GPIO lines, such as - * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed + * %GPIOHANDLE_REQUEST_OUTPUT, %GPIOHANDLE_REQUEST_ACTIVE_LOW etc, added * together - * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags, + * @default_values: if the %GPIOHANDLE_REQUEST_OUTPUT is set in flags, * this specifies the default output value, should be 0 (low) or * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high) * @padding: reserved for future use and should be zero filled * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_config instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_config instead. */ struct gpiohandle_config { __u32 flags; @@ -432,8 +434,8 @@ struct gpiohandle_config { * state of a line, when setting the state of lines these should contain * the desired target state * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_values instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_values instead. */ struct gpiohandle_data { __u8 values[GPIOHANDLES_MAX]; @@ -449,17 +451,17 @@ struct gpiohandle_data { * @lineoffset: the desired line to subscribe to events from, specified by * offset index for the associated GPIO device * @handleflags: desired handle flags for the desired GPIO line, such as - * GPIOHANDLE_REQUEST_ACTIVE_LOW or GPIOHANDLE_REQUEST_OPEN_DRAIN + * %GPIOHANDLE_REQUEST_ACTIVE_LOW or %GPIOHANDLE_REQUEST_OPEN_DRAIN * @eventflags: desired flags for the desired GPIO event line, such as - * GPIOEVENT_REQUEST_RISING_EDGE or GPIOEVENT_REQUEST_FALLING_EDGE + * %GPIOEVENT_REQUEST_RISING_EDGE or %GPIOEVENT_REQUEST_FALLING_EDGE * @consumer_label: a desired consumer label for the selected GPIO line(s) * such as "my-listener" * @fd: if successful this field will contain a valid anonymous file handle - * after a GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value + * after a %GPIO_GET_LINEEVENT_IOCTL operation, zero or negative value * means error * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_request instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_request instead. */ struct gpioevent_request { __u32 lineoffset; @@ -469,7 +471,7 @@ struct gpioevent_request { int fd; }; -/** +/* * GPIO event types */ #define GPIOEVENT_EVENT_RISING_EDGE 0x01 @@ -480,8 +482,8 @@ struct gpioevent_request { * @timestamp: best estimate of time of event occurrence, in nanoseconds * @id: event identifier * - * This struct is part of ABI v1 and is deprecated. - * Use struct gpio_v2_line_event instead. + * Note: This struct is part of ABI v1 and is deprecated. + * Use &struct gpio_v2_line_event instead. */ struct gpioevent_data { __u64 timestamp;