phy: mapphone-mdm6600: Improve phy related runtime PM calls

I noticed that phy_pm_runtime_get_sync() and phy_pm_runtime_put() are not
currently doing anything for phy-mapphone-mdm6600, only the sysfs interface
for works for "auto" and "on".

This is because of the shared GPIO pins between mdm6600 USB port and n_gsm
port. We have not enabled runtime PM for the phy driver until after we've
booted up mdm6600 properly to the USB mode. Otherwise phy_create() would
have called pm_runtime_enable() and pm_runtime_no_callbacks() automatically
on init.

Let's fix this by registering the phy a bit later after we've powered up
the mdm6600 USB port.

And as the PM runtime support is only needed for the n_gsm mode and not for
USB, we can allow the device to idle between phy_mdm6600_power_on() and
phy_mdm6600_power_off(). Note that for suspend, runtime_pm is already
disabled for the phy so we need to check for pm_runtime_enabled().

Cc: Johan Hovold <jhovold@gmail.com>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Sebastian Reichel <sre@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
This commit is contained in:
Tony Lindgren 2018-12-02 15:51:35 -08:00 коммит произвёл Kishon Vijay Abraham I
Родитель 72c0339c11
Коммит 2ad2af0816
1 изменённых файлов: 51 добавлений и 20 удалений

Просмотреть файл

@ -16,6 +16,7 @@
#include <linux/gpio/consumer.h>
#include <linux/of_platform.h>
#include <linux/phy/phy.h>
#include <linux/pinctrl/consumer.h>
#define PHY_MDM6600_PHY_DELAY_MS 4000 /* PHY enable 2.2s to 3.5s */
#define PHY_MDM6600_ENABLED_DELAY_MS 8000 /* 8s more total for MDM6600 */
@ -120,12 +121,22 @@ static int phy_mdm6600_power_on(struct phy *x)
{
struct phy_mdm6600 *ddata = phy_get_drvdata(x);
struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
int error;
if (!ddata->enabled)
return -ENODEV;
error = pinctrl_pm_select_default_state(ddata->dev);
if (error)
dev_warn(ddata->dev, "%s: error with default_state: %i\n",
__func__, error);
gpiod_set_value_cansleep(enable_gpio, 1);
/* Allow aggressive PM for USB, it's only needed for n_gsm port */
if (pm_runtime_enabled(&x->dev))
phy_pm_runtime_put(x);
return 0;
}
@ -133,12 +144,26 @@ static int phy_mdm6600_power_off(struct phy *x)
{
struct phy_mdm6600 *ddata = phy_get_drvdata(x);
struct gpio_desc *enable_gpio = ddata->ctrl_gpios[PHY_MDM6600_ENABLE];
int error;
if (!ddata->enabled)
return -ENODEV;
/* Paired with phy_pm_runtime_put() in phy_mdm6600_power_on() */
if (pm_runtime_enabled(&x->dev)) {
error = phy_pm_runtime_get(x);
if (error < 0 && error != -EINPROGRESS)
dev_warn(ddata->dev, "%s: phy_pm_runtime_get: %i\n",
__func__, error);
}
gpiod_set_value_cansleep(enable_gpio, 0);
error = pinctrl_pm_select_sleep_state(ddata->dev);
if (error)
dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
__func__, error);
return 0;
}
@ -529,28 +554,17 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
ddata->dev = &pdev->dev;
platform_set_drvdata(pdev, ddata);
/* Active state selected in phy_mdm6600_power_on() */
error = pinctrl_pm_select_sleep_state(ddata->dev);
if (error)
dev_warn(ddata->dev, "%s: error with sleep_state: %i\n",
__func__, error);
error = phy_mdm6600_init_lines(ddata);
if (error)
return error;
phy_mdm6600_init_irq(ddata);
ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
if (IS_ERR(ddata->generic_phy)) {
error = PTR_ERR(ddata->generic_phy);
goto cleanup;
}
phy_set_drvdata(ddata->generic_phy, ddata);
ddata->phy_provider =
devm_of_phy_provider_register(ddata->dev,
of_phy_simple_xlate);
if (IS_ERR(ddata->phy_provider)) {
error = PTR_ERR(ddata->phy_provider);
goto cleanup;
}
schedule_delayed_work(&ddata->bootup_work, 0);
/*
@ -574,14 +588,31 @@ static int phy_mdm6600_probe(struct platform_device *pdev)
if (error < 0) {
dev_warn(ddata->dev, "failed to wake modem: %i\n", error);
pm_runtime_put_noidle(ddata->dev);
goto cleanup;
}
ddata->generic_phy = devm_phy_create(ddata->dev, NULL, &gpio_usb_ops);
if (IS_ERR(ddata->generic_phy)) {
error = PTR_ERR(ddata->generic_phy);
goto idle;
}
phy_set_drvdata(ddata->generic_phy, ddata);
ddata->phy_provider =
devm_of_phy_provider_register(ddata->dev,
of_phy_simple_xlate);
if (IS_ERR(ddata->phy_provider))
error = PTR_ERR(ddata->phy_provider);
idle:
pm_runtime_mark_last_busy(ddata->dev);
pm_runtime_put_autosuspend(ddata->dev);
return 0;
cleanup:
phy_mdm6600_device_power_off(ddata);
if (error < 0)
phy_mdm6600_device_power_off(ddata);
return error;
}