dt-bindings: soc: qcom: Extend GLINK to cover SMEM

In addition to using GLINK for communication with the RPM it can be
used ontop of SMEM for communicating with remoteprocs, extend the
binding to also describe this case and reference the GLINK binding from
the affected remoteproc bindings.

Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>

Documentation/devicetree/bindings/remoteproc/qcom,adsp.txt

@@ -63,9 +63,10 @@ on the Qualcomm ADSP Hexagon core.
 
 
 = SUBNODES
-The adsp node may have an subnode named "smd-edge" that describes the SMD edge,
-channels and devices related to the ADSP.  See ../soc/qcom/qcom,smd.txt for
-details on how to describe the SMD edge.
+The adsp node may have an subnode named either "smd-edge" or "glink-edge" that
+describes the communication edge, channels and devices related to the ADSP.
+See ../soc/qcom/qcom,smd.txt and ../soc/qcom/qcom,glink.txt for details on how
+to describe these.
 
 
 = EXAMPLE

Documentation/devicetree/bindings/remoteproc/qcom,q6v5.txt

@@ -90,6 +90,11 @@ the memory regions used by the Hexagon firmware. Each sub-node must contain:
 	Value type: <phandle>
 	Definition: reference to the reserved-memory for the region
 
+The Hexagon node may also have an subnode named either "smd-edge" or
+"glink-edge" that describes the communication edge, channels and devices
+related to the Hexagon.  See ../soc/qcom/qcom,smd.txt and
+../soc/qcom/qcom,glink.txt for details on how to describe these.
+
 = EXAMPLE
 The following example describes the resources needed to boot control the
 Hexagon, as it is found on MSM8974 boards.

Documentation/devicetree/bindings/soc/qcom/qcom,glink.txt

@@ -1,11 +1,12 @@
-Qualcomm RPM GLINK binding
+Qualcomm GLINK edge binding
 
-This binding describes the Qualcomm RPM GLINK, a fifo based mechanism for
-communication with the Resource Power Management system on various Qualcomm
-platforms.
+This binding describes a Qualcomm GLINK edge, a fifo based mechanism for
+communication between subsystem-pairs on various Qualcomm platforms. Two types
+of edges can be described by the binding; the GLINK RPM edge and a SMEM based
+edge.
 
 - compatible:
-	Usage: required
+	Usage: required for glink-rpm
 	Value type: <stringlist>
 	Definition: must be "qcom,glink-rpm"
 
@@ -16,7 +17,7 @@ platforms.
 		    signal this processor about communication related events
 
 - qcom,rpm-msg-ram:
-	Usage: required
+	Usage: required for glink-rpm
 	Value type: <prop-encoded-array>
 	Definition: handle to RPM message memory resource