ASoC: Trace Wolfson jack detection IRQs

Add jack detection interrupt trace to Wolfson CODEC drivers.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Liam Girdwood <lrg@slimlogic.co.uk>

sound/soc/codecs/wm8350.c

@@ -26,6 +26,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
+#include <trace/events/asoc.h>
 
 #include "wm8350.h"
 
@@ -1378,10 +1379,12 @@ static irqreturn_t wm8350_hp_jack_handler(int irq, void *data)
 
 	switch (irq - wm8350->irq_base) {
 	case WM8350_IRQ_CODEC_JCK_DET_L:
+		trace_snd_soc_jack_irq("WM8350 HPL");
 		jack = &priv->hpl;
 		break;
 
 	case WM8350_IRQ_CODEC_JCK_DET_R:
+		trace_snd_soc_jack_irq("WM8350 HPR");
 		jack = &priv->hpr;
 		break;
 
@@ -1456,6 +1459,8 @@ static irqreturn_t wm8350_mic_handler(int irq, void *data)
 	u16 reg;
 	int report = 0;
 
+	trace_snd_soc_jack_irq("WM8350 mic");
+
 	reg = wm8350_reg_read(wm8350, WM8350_JACK_PIN_STATUS);
 	if (reg & WM8350_JACK_MICSCD_LVL)
 		report |= priv->mic.short_report;

sound/soc/codecs/wm8903.c

@@ -31,6 +31,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/wm8903.h>
+#include <trace/events/asoc.h>
 
 #include "wm8903.h"
 
@@ -1533,6 +1534,9 @@ static irqreturn_t wm8903_irq(int irq, void *data)
 	mic_report = wm8903->mic_last_report;
 	int_pol = snd_soc_read(codec, WM8903_INTERRUPT_POLARITY_1);
 
+	if (int_val & (WM8903_MICSHRT_EINT | WM8903_MICDET_EINT))
+		trace_snd_soc_jack_irq(dev_name(codec->dev));
+
 	if (int_val & WM8903_MICSHRT_EINT) {
 		dev_dbg(codec->dev, "Microphone short (pol=%x)\n", int_pol);
 

sound/soc/codecs/wm8962.c

@@ -32,6 +32,7 @@
 #include <sound/initval.h>
 #include <sound/tlv.h>
 #include <sound/wm8962.h>
+#include <trace/events/asoc.h>
 
 #include "wm8962.h"
 
@@ -3353,6 +3354,8 @@ static irqreturn_t wm8962_irq(int irq, void *data)
 	if (active & (WM8962_MICSCD_EINT | WM8962_MICD_EINT)) {
 		dev_dbg(codec->dev, "Microphone event detected\n");
 
+		trace_snd_soc_jack_irq(dev_name(codec->dev));
+
 		pm_wakeup_event(codec->dev, 300);
 
 		schedule_delayed_work(&wm8962->mic_work,

sound/soc/codecs/wm8994.c

@@ -28,6 +28,7 @@
 #include <sound/soc.h>
 #include <sound/initval.h>
 #include <sound/tlv.h>
+#include <trace/events/asoc.h>
 
 #include <linux/mfd/wm8994/core.h>
 #include <linux/mfd/wm8994/registers.h>
@@ -2755,6 +2756,8 @@ static irqreturn_t wm8994_mic_irq(int irq, void *data)
 	int reg;
 	int report;
 
+	trace_snd_soc_jack_irq(dev_name(codec->dev));
+
 	reg = snd_soc_read(codec, WM8994_INTERRUPT_RAW_STATUS_2);
 	if (reg < 0) {
 		dev_err(codec->dev, "Failed to read microphone status: %d\n",
@@ -2901,6 +2904,8 @@ static irqreturn_t wm8958_mic_irq(int irq, void *data)
 		goto out;
 	}
 
+	trace_snd_soc_jack_irq(dev_name(codec->dev));
+
 	if (wm8994->jack_cb)
 		wm8994->jack_cb(reg, wm8994->jack_cb_data);
 	else