Char/Misc patches for 4.15-rc1

Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. Note, there will be a merge conflict in drivers/misc/lkdtm_core.c when merging to your tree as one lkdtm patch came in through the perf tree as well as this one. The resolution is to take the const change that this tree provides. All of these have been in linux-next for quite a while with no reported issues. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> -----BEGIN PGP SIGNATURE----- iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWg2Lnw8cZ3JlZ0Brcm9h aC5jb20ACgkQMUfUDdst+ymTUwCgwp46+I8yPlgDH8oe5TxyyJnpdHQAn1XW0i+a sBi6WS87In5v1QO1Rgfc =dH2a -----END PGP SIGNATURE----- Merge tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc updates from Greg KH: "Here is the big set of char/misc and other driver subsystem patches for 4.15-rc1. There are small changes all over here, hyperv driver updates, pcmcia driver updates, w1 driver updats, vme driver updates, nvmem driver updates, and lots of other little one-off driver updates as well. The shortlog has the full details. All of these have been in linux-next for quite a while with no reported issues" * tag 'char-misc-4.15-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (90 commits) VME: Return -EBUSY when DMA list in use w1: keep balance of mutex locks and refcnts MAINTAINERS: Update VME subsystem tree. nvmem: sunxi-sid: add support for A64/H5's SID controller nvmem: imx-ocotp: Update module description nvmem: imx-ocotp: Enable i.MX7D OTP write support nvmem: imx-ocotp: Add i.MX7D timing write clock setup support nvmem: imx-ocotp: Move i.MX6 write clock setup to dedicated function nvmem: imx-ocotp: Add support for banked OTP addressing nvmem: imx-ocotp: Pass parameters via a struct nvmem: imx-ocotp: Restrict OTP write to IMX6 processors nvmem: uniphier: add UniPhier eFuse driver dt-bindings: nvmem: add description for UniPhier eFuse nvmem: set nvmem->owner to nvmem->dev->driver->owner if unset nvmem: qfprom: fix different address space warnings of sparse nvmem: mtk-efuse: fix different address space warnings of sparse nvmem: mtk-efuse: use stack for nvmem_config instead of malloc'ing it nvmem: imx-iim: use stack for nvmem_config instead of malloc'ing it thunderbolt: tb: fix use after free in tb_activate_pcie_devices MAINTAINERS: Add git tree for Thunderbolt development ...
2017-11-16 09:10:59 -08:00 · 2017-11-16 09:10:59 -08:00 · 2bf16b7a73
--- a/Documentation/ABI/stable/sysfs-bus-vmbus
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@ -41,3 +41,73 @@ KernelVersion:	4.5
 Contact:	K. Y. Srinivasan <kys@microsoft.com>
 Description:	The 16 bit vendor ID of the device
 Users:		tools/hv/lsvmbus and user level RDMA libraries
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	VCPU (sub)channel is affinitized to
+Users:		tools/hv/lsvmbus and other debuggig tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/cpu
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	VCPU (sub)channel is affinitized to
+Users:		tools/hv/lsvmbus and other debuggig tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/in_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Inbound channel signaling state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/latency
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel signaling latency
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/out_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Outbound channel signaling state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/pending
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel interrupt pending state
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/read_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes availabble to read
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/write_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes availabble to write
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/events
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have signaled the host
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/vmbus_*/channels/relid/interrupts
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have taken an interrupt (incoming)
+Users:		Debugging tools
--- a/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
+++ b/Documentation/ABI/testing/sysfs-driver-w1_ds28e17
@ -0,0 +1,21 @@
+What:		/sys/bus/w1/devices/19-<id>/speed
+Date:		Sep 2017
+KernelVersion:	4.14
+Contact:	Jan Kandziora <jjj@gmx.de>
+Description:	When written, this file sets the I2C speed on the connected
+		DS28E17 chip. When read, it reads the current setting from
+		the DS28E17 chip.
+		Valid values: 100, 400, 900 [kBaud].
+		Default 100, can be set by w1_ds28e17.speed= module parameter.
+Users:		w1_ds28e17 driver
+
+What:		/sys/bus/w1/devices/19-<id>/stretch
+Date:		Sep 2017
+KernelVersion:	4.14
+Contact:	Jan Kandziora <jjj@gmx.de>
+Description:	When written, this file sets the multiplier used to calculate
+		the busy timeout for I2C operations on the connected DS28E17
+		chip. When read, returns the current setting.
+		Valid values: 1 to 9.
+		Default 1, can be set by w1_ds28e17.stretch= module parameter.
+Users:		w1_ds28e17 driver
--- a/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
+++ b/Documentation/devicetree/bindings/nvmem/allwinner,sunxi-sid.txt
@ -5,6 +5,7 @@ Required properties:
  "allwinner,sun4i-a10-sid"
  "allwinner,sun7i-a20-sid"
  "allwinner,sun8i-h3-sid"
+  "allwinner,sun50i-a64-sid"

 - reg: Should contain registers location and length

--- a/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-efuse.txt
@ -1,4 +1,4 @@
-= Amlogic eFuse device tree bindings =
+= Amlogic Meson GX eFuse device tree bindings =

 Required properties:
 - compatible: should be "amlogic,meson-gxbb-efuse"
--- a/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/amlogic-meson-mx-efuse.txt
@ -0,0 +1,22 @@
+Amlogic Meson6/Meson8/Meson8b efuse
+
+Required Properties:
+- compatible: depending on the SoC this should be one of:
+	- "amlogic,meson6-efuse"
+	- "amlogic,meson8-efuse"
+	- "amlogic,meson8b-efuse"
+- reg: base address and size of the efuse registers
+- clocks: a reference to the efuse core gate clock
+- clock-names: must be "core"
+
+All properties and sub-nodes as well as the consumer bindings
+defined in nvmem.txt in this directory are also supported.
+
+
+Example:
+	efuse: nvmem@0 {
+		compatible = "amlogic,meson8-efuse";
+		reg = <0x0 0x2000>;
+		clocks = <&clkc CLKID_EFUSE>;
+		clock-names = "core";
+	};
--- a/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/rockchip-efuse.txt
@ -6,6 +6,7 @@ Required properties:
  - "rockchip,rk3188-efuse" - for RK3188 SoCs.
  - "rockchip,rk3228-efuse" - for RK3228 SoCs.
  - "rockchip,rk3288-efuse" - for RK3288 SoCs.
+  - "rockchip,rk3368-efuse" - for RK3368 SoCs.
  - "rockchip,rk3399-efuse" - for RK3399 SoCs.
 - reg: Should contain the registers location and exact eFuse size
 - clocks: Should be the clock id of eFuse
--- a/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
+++ b/Documentation/devicetree/bindings/nvmem/snvs-lpgpr.txt
@ -0,0 +1,20 @@
+Device tree bindings for Low Power General Purpose Register found in i.MX6Q/D
+Secure Non-Volatile Storage.
+
+This DT node should be represented as a sub-node of a "syscon",
+"simple-mfd" node.
+
+Required properties:
+- compatible: should be one of the fallowing variants:
+	"fsl,imx6q-snvs-lpgpr" for Freescale i.MX6Q/D/DL/S
+	"fsl,imx6ul-snvs-lpgpr" for Freescale i.MX6UL
+
+Example:
+snvs: snvs@020cc000 {
+	compatible = "fsl,sec-v4.0-mon", "syscon", "simple-mfd";
+	reg = <0x020cc000 0x4000>;
+
+	snvs_lpgpr: snvs-lpgpr {
+		compatible = "fsl,imx6q-snvs-lpgpr";
+	};
+};
--- a/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
+++ b/Documentation/devicetree/bindings/nvmem/uniphier-efuse.txt
@ -0,0 +1,49 @@
+= UniPhier eFuse device tree bindings =
+
+This UniPhier eFuse must be under soc-glue.
+
+Required properties:
+- compatible: should be "socionext,uniphier-efuse"
+- reg: should contain the register location and length
+
+= Data cells =
+Are child nodes of efuse, bindings of which as described in
+bindings/nvmem/nvmem.txt
+
+Example:
+
+	soc-glue@5f900000 {
+		compatible = "socionext,uniphier-ld20-soc-glue-debug",
+			     "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x5f900000 0x2000>;
+
+		efuse@100 {
+			compatible = "socionext,uniphier-efuse";
+			reg = <0x100 0x28>;
+		};
+
+		efuse@200 {
+			compatible = "socionext,uniphier-efuse";
+			reg = <0x200 0x68>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			/* Data cells */
+			usb_mon: usb-mon@54 {
+				reg = <0x54 0xc>;
+			};
+		};
+	};
+
+= Data consumers =
+Are device nodes which consume nvmem data cells.
+
+Example:
+
+	usb {
+		...
+		nvmem-cells = <&usb_mon>;
+		nvmem-cell-names = "usb_mon";
+	}
--- a/Documentation/trace/coresight-cpu-debug.txt
+++ b/Documentation/trace/coresight-cpu-debug.txt
@ -149,11 +149,23 @@ If you want to limit idle states at boot time, you can use "nohlt" or

 At the runtime you can disable idle states with below methods:

-Set latency request to /dev/cpu_dma_latency to disable all CPUs specific idle
-states (if latency = 0uS then disable all idle states):
-# echo "what_ever_latency_you_need_in_uS" > /dev/cpu_dma_latency
+It is possible to disable CPU idle states by way of the PM QoS
+subsystem, more specifically by using the "/dev/cpu_dma_latency"
+interface (see Documentation/power/pm_qos_interface.txt for more
+details).  As specified in the PM QoS documentation the requested
+parameter will stay in effect until the file descriptor is released.
+For example:

-Disable specific CPU's specific idle state:
+# exec 3<> /dev/cpu_dma_latency; echo 0 >&3
+...
+Do some work...
+...
+# exec 3<>-
+
+The same can also be done from an application program.
+
+Disable specific CPU's specific idle state from cpuidle sysfs (see
+Documentation/cpuidle/sysfs.txt):
 # echo 1 > /sys/devices/system/cpu/cpu$cpu/cpuidle/state$state/disable


--- a/Documentation/w1/slaves/00-INDEX
+++ b/Documentation/w1/slaves/00-INDEX
@ -10,3 +10,5 @@ w1_ds2438
 	- The Maxim/Dallas Semiconductor ds2438 smart battery monitor.
 w1_ds28e04
 	- The Maxim/Dallas Semiconductor ds28e04 eeprom.
+w1_ds28e17
+	- The Maxim/Dallas Semiconductor ds28e17 1-Wire-to-I2C Master Bridge.
--- a/Documentation/w1/slaves/w1_ds28e17
+++ b/Documentation/w1/slaves/w1_ds28e17
@ -0,0 +1,68 @@
+Kernel driver w1_ds28e17
+========================
+
+Supported chips:
+  * Maxim DS28E17 1-Wire-to-I2C Master Bridge
+
+supported family codes:
+	W1_FAMILY_DS28E17  0x19
+
+Author: Jan Kandziora <jjj@gmx.de>
+
+
+Description
+-----------
+The DS28E17 is a Onewire slave device which acts as an I2C bus master.
+
+This driver creates a new I2C bus for any DS28E17 device detected. I2C buses
+come and go as the DS28E17 devices come and go. I2C slave devices connected to
+a DS28E17 can be accessed by the kernel or userspace tools as if they were
+connected to a "native" I2C bus master.
+
+
+An udev rule like the following
+-------------------------------------------------------------------------------
+SUBSYSTEM=="i2c-dev", KERNEL=="i2c-[0-9]*", ATTRS{name}=="w1-19-*", \
+        SYMLINK+="i2c-$attr{name}"
+-------------------------------------------------------------------------------
+may be used to create stable /dev/i2c- entries based on the unique id of the
+DS28E17 chip.
+
+
+Driver parameters are:
+
+speed:
+	This sets up the default I2C speed a DS28E17 get configured for as soon
+	it is connected. The power-on default	of the DS28E17 is 400kBaud, but
+	chips may come and go on the Onewire bus without being de-powered and
+	as soon the "w1_ds28e17" driver notices a freshly connected, or
+	reconnected DS28E17 device on the Onewire bus, it will re-apply this
+	setting.
+
+	Valid values are 100, 400, 900 [kBaud]. Any other value means to leave
+	alone the current DS28E17 setting on detect. The default value is 100.
+
+stretch:
+	This sets up the default stretch value used for freshly connected
+	DS28E17 devices. It is a multiplier used on the calculation of the busy
+	wait time for an I2C transfer. This is to account for I2C slave devices
+	which make heavy use of the I2C clock stretching feature and thus, the
+	needed timeout cannot be pre-calculated correctly. As the w1_ds28e17
+	driver checks the DS28E17's busy flag in a loop after the precalculated
+	wait time, it should be hardly needed to tweak this setting.
+
+	Leave it at 1 unless you get ETIMEDOUT errors and a "w1_slave_driver
+	19-00000002dbd8: busy timeout" in the kernel log.
+
+	Valid values are 1 to 9. The default is 1.
+
+
+The driver creates sysfs files /sys/bus/w1/devices/19-<id>/speed and
+/sys/bus/w1/devices/19-<id>/stretch for each device, preloaded with the default
+settings from the driver parameters. They may be changed anytime. In addition a
+directory /sys/bus/w1/devices/19-<id>/i2c-<nnn> for the I2C bus master sysfs
+structure is created.
+
+
+See https://github.com/ianka/w1_ds28e17 for even more information.
+
--- a/5
+++ b/5
@ -5474,7 +5474,7 @@ K:	fmc_d.*register

 FPGA MANAGER FRAMEWORK
 M:	Alan Tull <atull@kernel.org>
-R:	Moritz Fischer <mdf@kernel.org>
+M:	Moritz Fischer <mdf@kernel.org>
 L:	linux-fpga@vger.kernel.org
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/atull/linux-fpga.git
@ -13390,6 +13390,7 @@ M:	Andreas Noever <andreas.noever@gmail.com>
 M:	Michael Jamet <michael.jamet@intel.com>
 M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 M:	Yehezkel Bernat <yehezkel.bernat@intel.com>
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/westeri/thunderbolt.git
 S:	Maintained
 F:	drivers/thunderbolt/
 F:	include/linux/thunderbolt.h
@ -14485,7 +14486,7 @@ M:	Manohar Vanga <manohar.vanga@gmail.com>
 M:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 L:	devel@driverdev.osuosl.org
 S:	Maintained
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc.git
 F:	Documentation/driver-api/vme.rst
 F:	drivers/staging/vme/
 F:	drivers/vme/
--- a/arch/x86/hyperv/hv_init.c
+++ b/arch/x86/hyperv/hv_init.c
@ -210,9 +210,10 @@ void hyperv_cleanup(void)
 }
 EXPORT_SYMBOL_GPL(hyperv_cleanup);

-void hyperv_report_panic(struct pt_regs *regs)
+void hyperv_report_panic(struct pt_regs *regs, long err)
 {
 	static bool panic_reported;
+	u64 guest_id;

 	/*
 	 * We prefer to report panic on 'die' chain as we have proper
@ -223,11 +224,13 @@ void hyperv_report_panic(struct pt_regs *regs)
 		return;
 	panic_reported = true;

-	wrmsrl(HV_X64_MSR_CRASH_P0, regs->ip);
-	wrmsrl(HV_X64_MSR_CRASH_P1, regs->ax);
-	wrmsrl(HV_X64_MSR_CRASH_P2, regs->bx);
-	wrmsrl(HV_X64_MSR_CRASH_P3, regs->cx);
-	wrmsrl(HV_X64_MSR_CRASH_P4, regs->dx);
+	rdmsrl(HV_X64_MSR_GUEST_OS_ID, guest_id);
+
+	wrmsrl(HV_X64_MSR_CRASH_P0, err);
+	wrmsrl(HV_X64_MSR_CRASH_P1, guest_id);
+	wrmsrl(HV_X64_MSR_CRASH_P2, regs->ip);
+	wrmsrl(HV_X64_MSR_CRASH_P3, regs->ax);
+	wrmsrl(HV_X64_MSR_CRASH_P4, regs->sp);

 	/*
 	 * Let Hyper-V know there is crash data available
--- a/arch/x86/include/asm/mshyperv.h
+++ b/arch/x86/include/asm/mshyperv.h
@ -311,7 +311,7 @@ static inline int hv_cpu_number_to_vp_number(int cpu_number)
 void hyperv_init(void);
 void hyperv_setup_mmu_ops(void);
 void hyper_alloc_mmu(void);
-void hyperv_report_panic(struct pt_regs *regs);
+void hyperv_report_panic(struct pt_regs *regs, long err);
 bool hv_is_hypercall_page_setup(void);
 void hyperv_cleanup(void);
 #else /* CONFIG_HYPERV */
--- a/drivers/android/binder.c
+++ b/drivers/android/binder.c
@ -2192,7 +2192,7 @@ static void binder_transaction_buffer_release(struct binder_proc *proc,
 						     off_start,
 						     offp - off_start);
 			if (!parent) {
-				pr_err("transaction release %d bad parent offset",
+				pr_err("transaction release %d bad parent offset\n",
 				       debug_id);
 				continue;
 			}
--- a/drivers/android/binder_alloc.c
+++ b/drivers/android/binder_alloc.c
@ -186,12 +186,12 @@ struct binder_buffer *binder_alloc_prepare_to_free(struct binder_alloc *alloc,
 }

 static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
-				    void *start, void *end,
-				    struct vm_area_struct *vma)
+				    void *start, void *end)
 {
 	void *page_addr;
 	unsigned long user_page_addr;
 	struct binder_lru_page *page;
+	struct vm_area_struct *vma = NULL;
 	struct mm_struct *mm = NULL;
 	bool need_mm = false;

@ -215,7 +215,7 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate,
 		}
 	}

-	if (!vma && need_mm && mmget_not_zero(alloc->vma_vm_mm))
+	if (need_mm && mmget_not_zero(alloc->vma_vm_mm))
 		mm = alloc->vma_vm_mm;

 	if (mm) {
@ -437,7 +437,7 @@ struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc,
 	if (end_page_addr > has_page_addr)
 		end_page_addr = has_page_addr;
 	ret = binder_update_page_range(alloc, 1,
-	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr, NULL);
+	    (void *)PAGE_ALIGN((uintptr_t)buffer->data), end_page_addr);
 	if (ret)
 		return ERR_PTR(ret);

@ -478,7 +478,7 @@ struct binder_buffer *binder_alloc_new_buf_locked(struct binder_alloc *alloc,
 err_alloc_buf_struct_failed:
 	binder_update_page_range(alloc, 0,
 				 (void *)PAGE_ALIGN((uintptr_t)buffer->data),
-				 end_page_addr, NULL);
+				 end_page_addr);
 	return ERR_PTR(-ENOMEM);
 }

@ -562,8 +562,7 @@ static void binder_delete_free_buffer(struct binder_alloc *alloc,
 				   alloc->pid, buffer->data,
 				   prev->data, next ? next->data : NULL);
 		binder_update_page_range(alloc, 0, buffer_start_page(buffer),
-					 buffer_start_page(buffer) + PAGE_SIZE,
-					 NULL);
+					 buffer_start_page(buffer) + PAGE_SIZE);
 	}
 	list_del(&buffer->entry);
 	kfree(buffer);
@ -600,8 +599,7 @@ static void binder_free_buf_locked(struct binder_alloc *alloc,

 	binder_update_page_range(alloc, 0,
 		(void *)PAGE_ALIGN((uintptr_t)buffer->data),
-		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK),
-		NULL);
+		(void *)(((uintptr_t)buffer->data + buffer_size) & PAGE_MASK));

 	rb_erase(&buffer->rb_node, &alloc->allocated_buffers);
 	buffer->free = 1;
@ -984,7 +982,7 @@ binder_shrink_scan(struct shrinker *shrink, struct shrink_control *sc)
 	return ret;
 }

-struct shrinker binder_shrinker = {
+static struct shrinker binder_shrinker = {
 	.count_objects = binder_shrink_count,
 	.scan_objects = binder_shrink_scan,
 	.seeks = DEFAULT_SEEKS,
--- a/drivers/char/pcmcia/cm4000_cs.c
+++ b/drivers/char/pcmcia/cm4000_cs.c
@ -659,9 +659,9 @@ static void terminate_monitor(struct cm4000_dev *dev)
 * is already doing that for you.
 */

-static void monitor_card(unsigned long p)
+static void monitor_card(struct timer_list *t)
 {
-	struct cm4000_dev *dev = (struct cm4000_dev *) p;
+	struct cm4000_dev *dev = from_timer(dev, t, timer);
 	unsigned int iobase = dev->p_dev->resource[0]->start;
 	unsigned short s;
 	struct ptsreq ptsreq;
@ -1374,7 +1374,7 @@ static void start_monitor(struct cm4000_dev *dev)
 	DEBUGP(3, dev, "-> start_monitor\n");
 	if (!dev->monitor_running) {
 		DEBUGP(5, dev, "create, init and add timer\n");
-		setup_timer(&dev->timer, monitor_card, (unsigned long)dev);
+		timer_setup(&dev->timer, monitor_card, 0);
 		dev->monitor_running = 1;
 		mod_timer(&dev->timer, jiffies);
 	} else
--- a/drivers/char/pcmcia/cm4040_cs.c
+++ b/drivers/char/pcmcia/cm4040_cs.c
@ -104,9 +104,9 @@ static inline unsigned char xinb(unsigned short port)

 /* poll the device fifo status register.  not to be confused with
 * the poll syscall. */
-static void cm4040_do_poll(unsigned long dummy)
+static void cm4040_do_poll(struct timer_list *t)
 {
-	struct reader_dev *dev = (struct reader_dev *) dummy;
+	struct reader_dev *dev = from_timer(dev, t, poll_timer);
 	unsigned int obs = xinb(dev->p_dev->resource[0]->start
 				+ REG_OFFSET_BUFFER_STATUS);

@ -465,7 +465,6 @@ static int cm4040_open(struct inode *inode, struct file *filp)

 	link->open = 1;

-	dev->poll_timer.data = (unsigned long) dev;
 	mod_timer(&dev->poll_timer, jiffies + POLL_PERIOD);

 	DEBUGP(2, dev, "<- cm4040_open (successfully)\n");
@ -585,7 +584,7 @@ static int reader_probe(struct pcmcia_device *link)
 	init_waitqueue_head(&dev->poll_wait);
 	init_waitqueue_head(&dev->read_wait);
 	init_waitqueue_head(&dev->write_wait);
-	setup_timer(&dev->poll_timer, cm4040_do_poll, 0);
+	timer_setup(&dev->poll_timer, cm4040_do_poll, 0);

 	ret = reader_config(link, i);
 	if (ret) {
--- a/drivers/char/pcmcia/synclink_cs.c
+++ b/drivers/char/pcmcia/synclink_cs.c
@ -375,7 +375,7 @@ static void reset_device(MGSLPC_INFO *info);
 static void hdlc_mode(MGSLPC_INFO *info);
 static void async_mode(MGSLPC_INFO *info);

-static void tx_timeout(unsigned long context);
+static void tx_timeout(struct timer_list *t);

 static int carrier_raised(struct tty_port *port);
 static void dtr_rts(struct tty_port *port, int onoff);
@ -1289,7 +1289,7 @@ static int startup(MGSLPC_INFO * info, struct tty_struct *tty)

 	memset(&info->icount, 0, sizeof(info->icount));

-	setup_timer(&info->tx_timer, tx_timeout, (unsigned long)info);
+	timer_setup(&info->tx_timer, tx_timeout, 0);

 	/* Allocate and claim adapter resources */
 	retval = claim_resources(info);
@ -3846,9 +3846,9 @@ static void trace_block(MGSLPC_INFO *info,const char* data, int count, int xmit)
 /* HDLC frame time out
 * update stats and do tx completion processing
 */
-static void tx_timeout(unsigned long context)
+static void tx_timeout(struct timer_list *t)
 {
-	MGSLPC_INFO *info = (MGSLPC_INFO*)context;
+	MGSLPC_INFO *info = from_timer(info, t, tx_timer);
 	unsigned long flags;

 	if (debug_level >= DEBUG_LEVEL_INFO)
--- a/drivers/fpga/xilinx-pr-decoupler.c
+++ b/drivers/fpga/xilinx-pr-decoupler.c
@ -79,7 +79,7 @@ static int xlnx_pr_decoupler_enable_show(struct fpga_bridge *bridge)
 	return !status;
 }

-static struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
+static const struct fpga_bridge_ops xlnx_pr_decoupler_br_ops = {
 	.enable_set = xlnx_pr_decoupler_enable_set,
 	.enable_show = xlnx_pr_decoupler_enable_show,
 };
--- a/drivers/fsi/fsi-core.c
+++ b/drivers/fsi/fsi-core.c
@ -185,7 +185,7 @@ static int fsi_slave_calc_addr(struct fsi_slave *slave, uint32_t *addrp,
 	return 0;
 }

-int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
+static int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)
 {
 	struct fsi_master *master = slave->master;
 	uint32_t irq, stat;
@ -215,8 +215,8 @@ int fsi_slave_report_and_clear_errors(struct fsi_slave *slave)

 static int fsi_slave_set_smode(struct fsi_master *master, int link, int id);

-int fsi_slave_handle_error(struct fsi_slave *slave, bool write, uint32_t addr,
-		size_t size)
+static int fsi_slave_handle_error(struct fsi_slave *slave, bool write,
+				  uint32_t addr, size_t size)
 {
 	struct fsi_master *master = slave->master;
 	int rc, link;
--- a/drivers/hv/Makefile
+++ b/drivers/hv/Makefile
@ -3,7 +3,9 @@ obj-$(CONFIG_HYPERV)		+= hv_vmbus.o
 obj-$(CONFIG_HYPERV_UTILS)	+= hv_utils.o
 obj-$(CONFIG_HYPERV_BALLOON)	+= hv_balloon.o

+CFLAGS_hv_trace.o = -I$(src)
+
 hv_vmbus-y := vmbus_drv.o \
 		 hv.o connection.o channel.o \
-		 channel_mgmt.o ring_buffer.o
+		 channel_mgmt.o ring_buffer.o hv_trace.o
 hv_utils-y := hv_util.o hv_kvp.o hv_snapshot.o hv_fcopy.o hv_utils_transport.o
--- a/drivers/hv/channel.c
+++ b/drivers/hv/channel.c
@ -43,6 +43,8 @@ void vmbus_setevent(struct vmbus_channel *channel)
 {
 	struct hv_monitor_page *monitorpage;

+	trace_vmbus_setevent(channel);
+
 	/*
 	 * For channels marked as in "low latency" mode
 	 * bypass the monitor page mechanism.
@ -185,6 +187,8 @@ int vmbus_open(struct vmbus_channel *newchannel, u32 send_ringbuffer_size,
 	ret = vmbus_post_msg(open_msg,
 			     sizeof(struct vmbus_channel_open_channel), true);

+	trace_vmbus_open(open_msg, ret);
+
 	if (ret != 0) {
 		err = ret;
 		goto error_clean_msglist;
@ -234,13 +238,18 @@ int vmbus_send_tl_connect_request(const uuid_le *shv_guest_servie_id,
 				  const uuid_le *shv_host_servie_id)
 {
 	struct vmbus_channel_tl_connect_request conn_msg;
+	int ret;

 	memset(&conn_msg, 0, sizeof(conn_msg));
 	conn_msg.header.msgtype = CHANNELMSG_TL_CONNECT_REQUEST;
 	conn_msg.guest_endpoint_id = *shv_guest_servie_id;
 	conn_msg.host_service_id = *shv_host_servie_id;

-	return vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+	ret = vmbus_post_msg(&conn_msg, sizeof(conn_msg), true);
+
+	trace_vmbus_send_tl_connect_request(&conn_msg, ret);
+
+	return ret;
 }
 EXPORT_SYMBOL_GPL(vmbus_send_tl_connect_request);

@ -433,6 +442,9 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,

 	ret = vmbus_post_msg(gpadlmsg, msginfo->msgsize -
 			     sizeof(*msginfo), true);
+
+	trace_vmbus_establish_gpadl_header(gpadlmsg, ret);
+
 	if (ret != 0)
 		goto cleanup;

@ -448,6 +460,9 @@ int vmbus_establish_gpadl(struct vmbus_channel *channel, void *kbuffer,
 		ret = vmbus_post_msg(gpadl_body,
 				     submsginfo->msgsize - sizeof(*submsginfo),
 				     true);
+
+		trace_vmbus_establish_gpadl_body(gpadl_body, ret);
+
 		if (ret != 0)
 			goto cleanup;

@ -511,6 +526,8 @@ int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
 			     true);

+	trace_vmbus_teardown_gpadl(msg, ret);
+
 	if (ret)
 		goto post_msg_err;

@ -589,6 +606,8 @@ static int vmbus_close_internal(struct vmbus_channel *channel)
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_close_channel),
 			     true);

+	trace_vmbus_close_internal(msg, ret);
+
 	if (ret) {
 		pr_err("Close failed: close post msg return is %d\n", ret);
 		/*
@ -745,6 +764,7 @@ int vmbus_sendpacket_pagebuffer(struct vmbus_channel *channel,
 	desc.dataoffset8 = descsize >> 3; /* in 8-bytes granularity */
 	desc.length8 = (u16)(packetlen_aligned >> 3);
 	desc.transactionid = requestid;
+	desc.reserved = 0;
 	desc.rangecount = pagecount;

 	for (i = 0; i < pagecount; i++) {
@ -788,6 +808,7 @@ int vmbus_sendpacket_mpb_desc(struct vmbus_channel *channel,
 	desc->dataoffset8 = desc_size >> 3; /* in 8-bytes granularity */
 	desc->length8 = (u16)(packetlen_aligned >> 3);
 	desc->transactionid = requestid;
+	desc->reserved = 0;
 	desc->rangecount = 1;

 	bufferlist[0].iov_base = desc;
--- a/drivers/hv/channel_mgmt.c
+++ b/drivers/hv/channel_mgmt.c
@ -350,7 +350,7 @@ static void free_channel(struct vmbus_channel *channel)
 {
 	tasklet_kill(&channel->callback_event);

-	kfree_rcu(channel, rcu);
+	kobject_put(&channel->kobj);
 }

 static void percpu_channel_enq(void *arg)
@ -373,12 +373,15 @@ static void percpu_channel_deq(void *arg)
 static void vmbus_release_relid(u32 relid)
 {
 	struct vmbus_channel_relid_released msg;
+	int ret;

 	memset(&msg, 0, sizeof(struct vmbus_channel_relid_released));
 	msg.child_relid = relid;
 	msg.header.msgtype = CHANNELMSG_RELID_RELEASED;
-	vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
-		       true);
+	ret = vmbus_post_msg(&msg, sizeof(struct vmbus_channel_relid_released),
+			     true);
+
+	trace_vmbus_release_relid(&msg, ret);
 }

 void hv_process_channel_removal(u32 relid)
@ -520,6 +523,14 @@ static void vmbus_process_offer(struct vmbus_channel *newchannel)
 	newchannel->state = CHANNEL_OPEN_STATE;

 	if (!fnew) {
+		struct hv_device *dev
+			= newchannel->primary_channel->device_obj;
+
+		if (vmbus_add_channel_kobj(dev, newchannel)) {
+			atomic_dec(&vmbus_connection.offer_in_progress);
+			goto err_free_chan;
+		}
+
 		if (channel->sc_creation_callback != NULL)
 			channel->sc_creation_callback(newchannel);
 		newchannel->probe_done = true;
@ -805,6 +816,8 @@ static void vmbus_onoffer(struct vmbus_channel_message_header *hdr)

 	offer = (struct vmbus_channel_offer_channel *)hdr;

+	trace_vmbus_onoffer(offer);
+
 	/* Allocate the channel object and save this offer. */
 	newchannel = alloc_channel();
 	if (!newchannel) {
@ -846,6 +859,8 @@ static void vmbus_onoffer_rescind(struct vmbus_channel_message_header *hdr)

 	rescind = (struct vmbus_channel_rescind_offer *)hdr;

+	trace_vmbus_onoffer_rescind(rescind);
+
 	/*
 	 * The offer msg and the corresponding rescind msg
 	 * from the host are guranteed to be ordered -
@ -974,6 +989,8 @@ static void vmbus_onopen_result(struct vmbus_channel_message_header *hdr)

 	result = (struct vmbus_channel_open_result *)hdr;

+	trace_vmbus_onopen_result(result);
+
 	/*
 	 * Find the open msg, copy the result and signal/unblock the wait event
 	 */
@ -1018,6 +1035,8 @@ static void vmbus_ongpadl_created(struct vmbus_channel_message_header *hdr)

 	gpadlcreated = (struct vmbus_channel_gpadl_created *)hdr;

+	trace_vmbus_ongpadl_created(gpadlcreated);
+
 	/*
 	 * Find the establish msg, copy the result and signal/unblock the wait
 	 * event
@ -1066,6 +1085,8 @@ static void vmbus_ongpadl_torndown(

 	gpadl_torndown = (struct vmbus_channel_gpadl_torndown *)hdr;

+	trace_vmbus_ongpadl_torndown(gpadl_torndown);
+
 	/*
 	 * Find the open msg, copy the result and signal/unblock the wait event
 	 */
@ -1109,6 +1130,9 @@ static void vmbus_onversion_response(
 	unsigned long flags;

 	version_response = (struct vmbus_channel_version_response *)hdr;
+
+	trace_vmbus_onversion_response(version_response);
+
 	spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);

 	list_for_each_entry(msginfo, &vmbus_connection.chn_msg_list,
@ -1168,6 +1192,8 @@ void vmbus_onmessage(void *context)
 	hdr = (struct vmbus_channel_message_header *)msg->u.payload;
 	size = msg->header.payload_size;

+	trace_vmbus_on_message(hdr);
+
 	if (hdr->msgtype >= CHANNELMSG_COUNT) {
 		pr_err("Received invalid channel message type %d size %d\n",
 			   hdr->msgtype, size);
@ -1201,9 +1227,11 @@ int vmbus_request_offers(void)

 	msg->msgtype = CHANNELMSG_REQUESTOFFERS;

-
 	ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_message_header),
 			     true);
+
+	trace_vmbus_request_offers(ret);
+
 	if (ret != 0) {
 		pr_err("Unable to request offers - %d\n", ret);

--- a/drivers/hv/connection.c
+++ b/drivers/hv/connection.c
@ -117,6 +117,9 @@ static int vmbus_negotiate_version(struct vmbus_channel_msginfo *msginfo,
 	ret = vmbus_post_msg(msg,
 			     sizeof(struct vmbus_channel_initiate_contact),
 			     true);
+
+	trace_vmbus_negotiate_version(msg, ret);
+
 	if (ret != 0) {
 		spin_lock_irqsave(&vmbus_connection.channelmsg_lock, flags);
 		list_del(&msginfo->msglistentry);
@ -319,6 +322,8 @@ void vmbus_on_event(unsigned long data)
 	struct vmbus_channel *channel = (void *) data;
 	unsigned long time_limit = jiffies + 2;

+	trace_vmbus_on_event(channel);
+
 	do {
 		void (*callback_fn)(void *);

@ -409,6 +414,8 @@ void vmbus_set_event(struct vmbus_channel *channel)
 	if (!channel->is_dedicated_interrupt)
 		vmbus_send_interrupt(child_relid);

+	++channel->sig_events;
+
 	hv_do_fast_hypercall8(HVCALL_SIGNAL_EVENT, channel->sig_event);
 }
 EXPORT_SYMBOL_GPL(vmbus_set_event);
--- a/drivers/hv/hv_trace.c
+++ b/drivers/hv/hv_trace.c
@ -0,0 +1,4 @@
+#include "hyperv_vmbus.h"
+
+#define CREATE_TRACE_POINTS
+#include "hv_trace.h"
--- a/drivers/hv/hv_trace.h
+++ b/drivers/hv/hv_trace.h
@ -0,0 +1,327 @@
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM hyperv
+
+#if !defined(_HV_TRACE_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _HV_TRACE_H
+
+#include <linux/tracepoint.h>
+
+DECLARE_EVENT_CLASS(vmbus_hdr_msg,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr),
+	TP_STRUCT__entry(__field(unsigned int, msgtype)),
+	TP_fast_assign(__entry->msgtype = hdr->msgtype;),
+	TP_printk("msgtype=%u", __entry->msgtype)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_msg_dpc,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr)
+);
+
+DEFINE_EVENT(vmbus_hdr_msg, vmbus_on_message,
+	TP_PROTO(const struct vmbus_channel_message_header *hdr),
+	TP_ARGS(hdr)
+);
+
+TRACE_EVENT(vmbus_onoffer,
+	    TP_PROTO(const struct vmbus_channel_offer_channel *offer),
+	    TP_ARGS(offer),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u8, monitorid)
+		    __field(u16, is_ddc_int)
+		    __field(u32, connection_id)
+		    __array(char, if_type, 16)
+		    __array(char, if_instance, 16)
+		    __field(u16, chn_flags)
+		    __field(u16, mmio_mb)
+		    __field(u16, sub_idx)
+		    ),
+	    TP_fast_assign(__entry->child_relid = offer->child_relid;
+			   __entry->monitorid = offer->monitorid;
+			   __entry->is_ddc_int = offer->is_dedicated_interrupt;
+			   __entry->connection_id = offer->connection_id;
+			   memcpy(__entry->if_type,
+				  &offer->offer.if_type.b, 16);
+			   memcpy(__entry->if_instance,
+				  &offer->offer.if_instance.b, 16);
+			   __entry->chn_flags = offer->offer.chn_flags;
+			   __entry->mmio_mb = offer->offer.mmio_megabytes;
+			   __entry->sub_idx = offer->offer.sub_channel_index;
+		    ),
+	    TP_printk("child_relid 0x%x, monitorid 0x%x, is_dedicated %d, "
+		      "connection_id 0x%x, if_type %pUl, if_instance %pUl, "
+		      "chn_flags 0x%x, mmio_megabytes %d, sub_channel_index %d",
+		      __entry->child_relid, __entry->monitorid,
+		      __entry->is_ddc_int, __entry->connection_id,
+		      __entry->if_type, __entry->if_instance,
+		      __entry->chn_flags, __entry->mmio_mb,
+		      __entry->sub_idx
+		    )
+	);
+
+TRACE_EVENT(vmbus_onoffer_rescind,
+	    TP_PROTO(const struct vmbus_channel_rescind_offer *offer),
+	    TP_ARGS(offer),
+	    TP_STRUCT__entry(__field(u32, child_relid)),
+	    TP_fast_assign(__entry->child_relid = offer->child_relid),
+	    TP_printk("child_relid 0x%x", __entry->child_relid)
+	);
+
+TRACE_EVENT(vmbus_onopen_result,
+	    TP_PROTO(const struct vmbus_channel_open_result *result),
+	    TP_ARGS(result),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, openid)
+		    __field(u32, status)
+		    ),
+	    TP_fast_assign(__entry->child_relid = result->child_relid;
+			   __entry->openid = result->openid;
+			   __entry->status = result->status;
+		    ),
+	    TP_printk("child_relid 0x%x, openid %d, status %d",
+		      __entry->child_relid,  __entry->openid,  __entry->status
+		    )
+	);
+
+TRACE_EVENT(vmbus_ongpadl_created,
+	    TP_PROTO(const struct vmbus_channel_gpadl_created *gpadlcreated),
+	    TP_ARGS(gpadlcreated),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(u32, status)
+		    ),
+	    TP_fast_assign(__entry->child_relid = gpadlcreated->child_relid;
+			   __entry->gpadl = gpadlcreated->gpadl;
+			   __entry->status = gpadlcreated->creation_status;
+		    ),
+	    TP_printk("child_relid 0x%x, gpadl 0x%x, creation_status %d",
+		      __entry->child_relid,  __entry->gpadl,  __entry->status
+		    )
+	);
+
+TRACE_EVENT(vmbus_ongpadl_torndown,
+	    TP_PROTO(const struct vmbus_channel_gpadl_torndown *gpadltorndown),
+	    TP_ARGS(gpadltorndown),
+	    TP_STRUCT__entry(__field(u32, gpadl)),
+	    TP_fast_assign(__entry->gpadl = gpadltorndown->gpadl),
+	    TP_printk("gpadl 0x%x", __entry->gpadl)
+	);
+
+TRACE_EVENT(vmbus_onversion_response,
+	    TP_PROTO(const struct vmbus_channel_version_response *response),
+	    TP_ARGS(response),
+	    TP_STRUCT__entry(
+		    __field(u8, ver)
+		    ),
+	    TP_fast_assign(__entry->ver = response->version_supported;
+		    ),
+	    TP_printk("version_supported %d", __entry->ver)
+	);
+
+TRACE_EVENT(vmbus_request_offers,
+	    TP_PROTO(int ret),
+	    TP_ARGS(ret),
+	    TP_STRUCT__entry(__field(int, ret)),
+	    TP_fast_assign(__entry->ret = ret),
+	    TP_printk("sending ret %d", __entry->ret)
+	);
+
+TRACE_EVENT(vmbus_open,
+	    TP_PROTO(const struct vmbus_channel_open_channel *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, openid)
+		    __field(u32, gpadlhandle)
+		    __field(u32, target_vp)
+		    __field(u32, offset)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->openid = msg->openid;
+		    __entry->gpadlhandle = msg->ringbuffer_gpadlhandle;
+		    __entry->target_vp = msg->target_vp;
+		    __entry->offset = msg->downstream_ringbuffer_pageoffset;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, openid %d, "
+		      "gpadlhandle 0x%x, target_vp 0x%x, offset 0x%x, ret %d",
+		      __entry->child_relid,  __entry->openid,
+		      __entry->gpadlhandle, __entry->target_vp,
+		      __entry->offset, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_close_internal,
+	    TP_PROTO(const struct vmbus_channel_close_channel *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, ret %d", __entry->child_relid,
+		    __entry->ret)
+	);
+
+TRACE_EVENT(vmbus_establish_gpadl_header,
+	    TP_PROTO(const struct vmbus_channel_gpadl_header *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(u16, range_buflen)
+		    __field(u16, rangecount)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->range_buflen = msg->range_buflen;
+		    __entry->rangecount = msg->rangecount;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, gpadl 0x%x, range_buflen %d "
+		      "rangecount %d, ret %d",
+		      __entry->child_relid, __entry->gpadl,
+		      __entry->range_buflen, __entry->rangecount, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_establish_gpadl_body,
+	    TP_PROTO(const struct vmbus_channel_gpadl_body *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, msgnumber)
+		    __field(u32, gpadl)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->msgnumber = msg->msgnumber;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending msgnumber %d, gpadl 0x%x, ret %d",
+		      __entry->msgnumber, __entry->gpadl, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_teardown_gpadl,
+	    TP_PROTO(const struct vmbus_channel_gpadl_teardown *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(u32, gpadl)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->gpadl = msg->gpadl;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, gpadl 0x%x, ret %d",
+		      __entry->child_relid, __entry->gpadl, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_negotiate_version,
+	    TP_PROTO(const struct vmbus_channel_initiate_contact *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, ver)
+		    __field(u32, target_vcpu)
+		    __field(int, ret)
+		    __field(u64, int_page)
+		    __field(u64, mon_page1)
+		    __field(u64, mon_page2)
+		    ),
+	    TP_fast_assign(
+		    __entry->ver = msg->vmbus_version_requested;
+		    __entry->target_vcpu = msg->target_vcpu;
+		    __entry->int_page = msg->interrupt_page;
+		    __entry->mon_page1 = msg->monitor_page1;
+		    __entry->mon_page2 = msg->monitor_page2;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending vmbus_version_requested %d, target_vcpu 0x%x, "
+		      "pages %llx:%llx:%llx, ret %d",
+		      __entry->ver, __entry->target_vcpu, __entry->int_page,
+		      __entry->mon_page1, __entry->mon_page2, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_release_relid,
+	    TP_PROTO(const struct vmbus_channel_relid_released *msg, int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __field(u32, child_relid)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    __entry->child_relid = msg->child_relid;
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending child_relid 0x%x, ret %d",
+		      __entry->child_relid, __entry->ret
+		    )
+	);
+
+TRACE_EVENT(vmbus_send_tl_connect_request,
+	    TP_PROTO(const struct vmbus_channel_tl_connect_request *msg,
+		     int ret),
+	    TP_ARGS(msg, ret),
+	    TP_STRUCT__entry(
+		    __array(char, guest_id, 16)
+		    __array(char, host_id, 16)
+		    __field(int, ret)
+		    ),
+	    TP_fast_assign(
+		    memcpy(__entry->guest_id, &msg->guest_endpoint_id.b, 16);
+		    memcpy(__entry->host_id, &msg->host_service_id.b, 16);
+		    __entry->ret = ret;
+		    ),
+	    TP_printk("sending guest_endpoint_id %pUl, host_service_id %pUl, "
+		      "ret %d",
+		      __entry->guest_id, __entry->host_id, __entry->ret
+		    )
+	);
+
+DECLARE_EVENT_CLASS(vmbus_channel,
+	TP_PROTO(const struct vmbus_channel *channel),
+	TP_ARGS(channel),
+	TP_STRUCT__entry(__field(u32, relid)),
+	TP_fast_assign(__entry->relid = channel->offermsg.child_relid),
+	TP_printk("relid 0x%x", __entry->relid)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_chan_sched,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_setevent,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+DEFINE_EVENT(vmbus_channel, vmbus_on_event,
+	    TP_PROTO(const struct vmbus_channel *channel),
+	    TP_ARGS(channel)
+);
+
+#undef TRACE_INCLUDE_PATH
+#define TRACE_INCLUDE_PATH .
+#undef TRACE_INCLUDE_FILE
+#define TRACE_INCLUDE_FILE hv_trace
+#endif /* _HV_TRACE_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>
--- a/drivers/hv/hyperv_vmbus.h
+++ b/drivers/hv/hyperv_vmbus.h
@ -31,6 +31,8 @@
 #include <linux/hyperv.h>
 #include <linux/interrupt.h>

+#include "hv_trace.h"
+
 /*
 * Timeout for services such as KVP and fcopy.
 */
@ -373,6 +375,8 @@ struct hv_device *vmbus_device_create(const uuid_le *type,

 int vmbus_device_register(struct hv_device *child_device_obj);
 void vmbus_device_unregister(struct hv_device *device_obj);
+int vmbus_add_channel_kobj(struct hv_device *device_obj,
+			   struct vmbus_channel *channel);

 struct vmbus_channel *relid2channel(u32 relid);

--- a/drivers/hv/vmbus_drv.c
+++ b/drivers/hv/vmbus_drv.c
@ -65,7 +65,7 @@ static int hyperv_panic_event(struct notifier_block *nb, unsigned long val,

 	regs = current_pt_regs();

-	hyperv_report_panic(regs);
+	hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }

@ -75,7 +75,7 @@ static int hyperv_die_event(struct notifier_block *nb, unsigned long val,
 	struct die_args *die = (struct die_args *)args;
 	struct pt_regs *regs = die->regs;

-	hyperv_report_panic(regs);
+	hyperv_report_panic(regs, val);
 	return NOTIFY_DONE;
 }

@ -107,28 +107,30 @@ static void print_alias_name(struct hv_device *hv_dev, char *alias_name)
 		sprintf(&alias_name[i], "%02x", hv_dev->dev_type.b[i/2]);
 }

-static u8 channel_monitor_group(struct vmbus_channel *channel)
+static u8 channel_monitor_group(const struct vmbus_channel *channel)
 {
 	return (u8)channel->offermsg.monitorid / 32;
 }

-static u8 channel_monitor_offset(struct vmbus_channel *channel)
+static u8 channel_monitor_offset(const struct vmbus_channel *channel)
 {
 	return (u8)channel->offermsg.monitorid % 32;
 }

-static u32 channel_pending(struct vmbus_channel *channel,
-			   struct hv_monitor_page *monitor_page)
+static u32 channel_pending(const struct vmbus_channel *channel,
+			   const struct hv_monitor_page *monitor_page)
 {
 	u8 monitor_group = channel_monitor_group(channel);
+
 	return monitor_page->trigger_group[monitor_group].pending;
 }

-static u32 channel_latency(struct vmbus_channel *channel,
-			   struct hv_monitor_page *monitor_page)
+static u32 channel_latency(const struct vmbus_channel *channel,
+			   const struct hv_monitor_page *monitor_page)
 {
 	u8 monitor_group = channel_monitor_group(channel);
 	u8 monitor_offset = channel_monitor_offset(channel);
+
 	return monitor_page->latency[monitor_group][monitor_offset];
 }

@ -833,6 +835,8 @@ void vmbus_on_msg_dpc(unsigned long data)

 	hdr = (struct vmbus_channel_message_header *)msg->u.payload;

+	trace_vmbus_on_msg_dpc(hdr);
+
 	if (hdr->msgtype >= CHANNELMSG_COUNT) {
 		WARN_ONCE(1, "unknown msgtype=%d\n", hdr->msgtype);
 		goto msg_handled;
@ -942,6 +946,10 @@ static void vmbus_chan_sched(struct hv_per_cpu_context *hv_cpu)
 			if (channel->rescind)
 				continue;

+			trace_vmbus_chan_sched(channel);
+
+			++channel->interrupts;
+
 			switch (channel->callback_mode) {
 			case HV_CALL_ISR:
 				vmbus_channel_isr(channel);
@ -1133,6 +1141,159 @@ void vmbus_driver_unregister(struct hv_driver *hv_driver)
 }
 EXPORT_SYMBOL_GPL(vmbus_driver_unregister);

+
+/*
+ * Called when last reference to channel is gone.
+ */
+static void vmbus_chan_release(struct kobject *kobj)
+{
+	struct vmbus_channel *channel
+		= container_of(kobj, struct vmbus_channel, kobj);
+
+	kfree_rcu(channel, rcu);
+}
+
+struct vmbus_chan_attribute {
+	struct attribute attr;
+	ssize_t (*show)(const struct vmbus_channel *chan, char *buf);
+	ssize_t (*store)(struct vmbus_channel *chan,
+			 const char *buf, size_t count);
+};
+#define VMBUS_CHAN_ATTR(_name, _mode, _show, _store) \
+	struct vmbus_chan_attribute chan_attr_##_name \
+		= __ATTR(_name, _mode, _show, _store)
+#define VMBUS_CHAN_ATTR_RW(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RW(_name)
+#define VMBUS_CHAN_ATTR_RO(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_RO(_name)
+#define VMBUS_CHAN_ATTR_WO(_name) \
+	struct vmbus_chan_attribute chan_attr_##_name = __ATTR_WO(_name)
+
+static ssize_t vmbus_chan_attr_show(struct kobject *kobj,
+				    struct attribute *attr, char *buf)
+{
+	const struct vmbus_chan_attribute *attribute
+		= container_of(attr, struct vmbus_chan_attribute, attr);
+	const struct vmbus_channel *chan
+		= container_of(kobj, struct vmbus_channel, kobj);
+
+	if (!attribute->show)
+		return -EIO;
+
+	return attribute->show(chan, buf);
+}
+
+static const struct sysfs_ops vmbus_chan_sysfs_ops = {
+	.show = vmbus_chan_attr_show,
+};
+
+static ssize_t out_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+	return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(out_mask);
+
+static ssize_t in_mask_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+	return sprintf(buf, "%u\n", rbi->ring_buffer->interrupt_mask);
+}
+VMBUS_CHAN_ATTR_RO(in_mask);
+
+static ssize_t read_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->inbound;
+
+	return sprintf(buf, "%u\n", hv_get_bytes_to_read(rbi));
+}
+VMBUS_CHAN_ATTR_RO(read_avail);
+
+static ssize_t write_avail_show(const struct vmbus_channel *channel, char *buf)
+{
+	const struct hv_ring_buffer_info *rbi = &channel->outbound;
+
+	return sprintf(buf, "%u\n", hv_get_bytes_to_write(rbi));
+}
+VMBUS_CHAN_ATTR_RO(write_avail);
+
+static ssize_t show_target_cpu(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%u\n", channel->target_cpu);
+}
+VMBUS_CHAN_ATTR(cpu, S_IRUGO, show_target_cpu, NULL);
+
+static ssize_t channel_pending_show(const struct vmbus_channel *channel,
+				    char *buf)
+{
+	return sprintf(buf, "%d\n",
+		       channel_pending(channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(pending, S_IRUGO, channel_pending_show, NULL);
+
+static ssize_t channel_latency_show(const struct vmbus_channel *channel,
+				    char *buf)
+{
+	return sprintf(buf, "%d\n",
+		       channel_latency(channel,
+				       vmbus_connection.monitor_pages[1]));
+}
+VMBUS_CHAN_ATTR(latency, S_IRUGO, channel_latency_show, NULL);
+
+static ssize_t channel_interrupts_show(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%llu\n", channel->interrupts);
+}
+VMBUS_CHAN_ATTR(interrupts, S_IRUGO, channel_interrupts_show, NULL);
+
+static ssize_t channel_events_show(const struct vmbus_channel *channel, char *buf)
+{
+	return sprintf(buf, "%llu\n", channel->sig_events);
+}
+VMBUS_CHAN_ATTR(events, S_IRUGO, channel_events_show, NULL);
+
+static struct attribute *vmbus_chan_attrs[] = {
+	&chan_attr_out_mask.attr,
+	&chan_attr_in_mask.attr,
+	&chan_attr_read_avail.attr,
+	&chan_attr_write_avail.attr,
+	&chan_attr_cpu.attr,
+	&chan_attr_pending.attr,
+	&chan_attr_latency.attr,
+	&chan_attr_interrupts.attr,
+	&chan_attr_events.attr,
+	NULL
+};
+
+static struct kobj_type vmbus_chan_ktype = {
+	.sysfs_ops = &vmbus_chan_sysfs_ops,
+	.release = vmbus_chan_release,
+	.default_attrs = vmbus_chan_attrs,
+};
+
+/*
+ * vmbus_add_channel_kobj - setup a sub-directory under device/channels
+ */
+int vmbus_add_channel_kobj(struct hv_device *dev, struct vmbus_channel *channel)
+{
+	struct kobject *kobj = &channel->kobj;
+	u32 relid = channel->offermsg.child_relid;
+	int ret;
+
+	kobj->kset = dev->channels_kset;
+	ret = kobject_init_and_add(kobj, &vmbus_chan_ktype, NULL,
+				   "%u", relid);
+	if (ret)
+		return ret;
+
+	kobject_uevent(kobj, KOBJ_ADD);
+
+	return 0;
+}
+
 /*
 * vmbus_device_create - Creates and registers a new child device
 * on the vmbus.
@ -1164,7 +1325,8 @@ struct hv_device *vmbus_device_create(const uuid_le *type,
 */
 int vmbus_device_register(struct hv_device *child_device_obj)
 {
-	int ret = 0;
+	struct kobject *kobj = &child_device_obj->device.kobj;
+	int ret;

 	dev_set_name(&child_device_obj->device, "%pUl",
 		     child_device_obj->channel->offermsg.offer.if_instance.b);
@ -1178,13 +1340,32 @@ int vmbus_device_register(struct hv_device *child_device_obj)
 	 * binding...which will eventually call vmbus_match() and vmbus_probe()
 	 */
 	ret = device_register(&child_device_obj->device);
-
-	if (ret)
+	if (ret) {
 		pr_err("Unable to register child device\n");
-	else
-		pr_debug("child device %s registered\n",
-			dev_name(&child_device_obj->device));
+		return ret;
+	}

+	child_device_obj->channels_kset = kset_create_and_add("channels",
+							      NULL, kobj);
+	if (!child_device_obj->channels_kset) {
+		ret = -ENOMEM;
+		goto err_dev_unregister;
+	}
+
+	ret = vmbus_add_channel_kobj(child_device_obj,
+				     child_device_obj->channel);
+	if (ret) {
+		pr_err("Unable to register primary channeln");
+		goto err_kset_unregister;
+	}
+
+	return 0;
+
+err_kset_unregister:
+	kset_unregister(child_device_obj->channels_kset);
+
+err_dev_unregister:
+	device_unregister(&child_device_obj->device);
 	return ret;
 }

--- a/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
+++ b/drivers/hwtracing/coresight/coresight-dynamic-replicator.c
@ -199,8 +199,8 @@ static const struct dev_pm_ops replicator_dev_pm_ops = {

 static const struct amba_id replicator_ids[] = {
 	{
-		.id     = 0x0003b909,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb909,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC-600 */
--- a/drivers/hwtracing/coresight/coresight-etb10.c
+++ b/drivers/hwtracing/coresight/coresight-etb10.c
@ -748,8 +748,8 @@ static const struct dev_pm_ops etb_dev_pm_ops = {

 static const struct amba_id etb_ids[] = {
 	{
-		.id	= 0x0003b907,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb907,
+		.mask	= 0x000fffff,
 	},
 	{ 0, 0},
 };
--- a/drivers/hwtracing/coresight/coresight-etm3x.c
+++ b/drivers/hwtracing/coresight/coresight-etm3x.c
@ -901,33 +901,33 @@ static const struct dev_pm_ops etm_dev_pm_ops = {

 static const struct amba_id etm_ids[] = {
 	{	/* ETM 3.3 */
-		.id	= 0x0003b921,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb921,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.3",
 	},
 	{	/* ETM 3.5 - Cortex-A5 */
-		.id	= 0x0003b955,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb955,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.5",
 	},
 	{	/* ETM 3.5 */
-		.id	= 0x0003b956,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb956,
+		.mask	= 0x000fffff,
 		.data	= "ETM 3.5",
 	},
 	{	/* PTM 1.0 */
-		.id	= 0x0003b950,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb950,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.0",
 	},
 	{	/* PTM 1.1 */
-		.id	= 0x0003b95f,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb95f,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.1",
 	},
 	{	/* PTM 1.1 Qualcomm */
-		.id	= 0x0003006f,
-		.mask	= 0x0003ffff,
+		.id	= 0x000b006f,
+		.mask	= 0x000fffff,
 		.data	= "PTM 1.1",
 	},
 	{ 0, 0},
--- a/drivers/hwtracing/coresight/coresight-funnel.c
+++ b/drivers/hwtracing/coresight/coresight-funnel.c
@ -248,8 +248,8 @@ static const struct dev_pm_ops funnel_dev_pm_ops = {

 static const struct amba_id funnel_ids[] = {
 	{
-		.id     = 0x0003b908,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb908,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC-600 */
--- a/drivers/hwtracing/coresight/coresight-stm.c
+++ b/drivers/hwtracing/coresight/coresight-stm.c
@ -917,13 +917,13 @@ static const struct dev_pm_ops stm_dev_pm_ops = {

 static const struct amba_id stm_ids[] = {
 	{
-		.id     = 0x0003b962,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb962,
+		.mask   = 0x000fffff,
 		.data	= "STM32",
 	},
 	{
-		.id	= 0x0003b963,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb963,
+		.mask	= 0x000fffff,
 		.data	= "STM500",
 	},
 	{ 0, 0},
--- a/drivers/hwtracing/coresight/coresight-tmc.c
+++ b/drivers/hwtracing/coresight/coresight-tmc.c
@ -439,8 +439,8 @@ out:

 static const struct amba_id tmc_ids[] = {
 	{
-		.id     = 0x0003b961,
-		.mask   = 0x0003ffff,
+		.id     = 0x000bb961,
+		.mask   = 0x000fffff,
 	},
 	{
 		/* Coresight SoC 600 TMC-ETR/ETS */
--- a/drivers/hwtracing/coresight/coresight-tpiu.c
+++ b/drivers/hwtracing/coresight/coresight-tpiu.c
@ -194,8 +194,8 @@ static const struct dev_pm_ops tpiu_dev_pm_ops = {

 static const struct amba_id tpiu_ids[] = {
 	{
-		.id	= 0x0003b912,
-		.mask	= 0x0003ffff,
+		.id	= 0x000bb912,
+		.mask	= 0x000fffff,
 	},
 	{
 		.id	= 0x0004b912,
--- a/drivers/misc/altera-stapl/Kconfig
+++ b/drivers/misc/altera-stapl/Kconfig
@ -1,4 +1,5 @@
-comment "Altera FPGA firmware download module"
+comment "Altera FPGA firmware download module (requires I2C)"
+	depends on !I2C

 config ALTERA_STAPL
 	tristate "Altera FPGA firmware download module"
--- a/drivers/misc/genwqe/card_base.h
+++ b/drivers/misc/genwqe/card_base.h
@ -182,6 +182,7 @@ struct dma_mapping {

 	struct list_head card_list;	/* list of usr_maps for card */
 	struct list_head pin_list;	/* list of pinned memory for dev */
+	int write;			/* writable map? useful in unmapping */
 };

 static inline void genwqe_mapping_init(struct dma_mapping *m,
@ -189,6 +190,7 @@ static inline void genwqe_mapping_init(struct dma_mapping *m,
 {
 	memset(m, 0, sizeof(*m));
 	m->type = type;
+	m->write = 1; /* Assume the maps we create are R/W */
 }

 /**
@ -347,6 +349,7 @@ enum genwqe_requ_state {
 * @user_size:      size of user-space memory area
 * @page:           buffer for partial pages if needed
 * @page_dma_addr:  dma address partial pages
+ * @write:          should we write it back to userspace?
 */
 struct genwqe_sgl {
 	dma_addr_t sgl_dma_addr;
@ -356,6 +359,8 @@ struct genwqe_sgl {
 	void __user *user_addr; /* user-space base-address */
 	size_t user_size;       /* size of memory area */

+	int write;
+
 	unsigned long nr_pages;
 	unsigned long fpage_offs;
 	size_t fpage_size;
@ -369,7 +374,7 @@ struct genwqe_sgl {
 };

 int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
-			  void __user *user_addr, size_t user_size);
+			  void __user *user_addr, size_t user_size, int write);

 int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 		     dma_addr_t *dma_list);
--- a/drivers/misc/genwqe/card_dev.c
+++ b/drivers/misc/genwqe/card_dev.c
@ -942,6 +942,10 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)

 				genwqe_mapping_init(m,
 						    GENWQE_MAPPING_SGL_TEMP);
+
+				if (ats_flags == ATS_TYPE_SGL_RD)
+					m->write = 0;
+
 				rc = genwqe_user_vmap(cd, m, (void *)u_addr,
 						      u_size, req);
 				if (rc != 0)
@ -954,7 +958,7 @@ static int ddcb_cmd_fixups(struct genwqe_file *cfile, struct ddcb_requ *req)
 			/* create genwqe style scatter gather list */
 			rc = genwqe_alloc_sync_sgl(cd, &req->sgls[i],
 						   (void __user *)u_addr,
-						   u_size);
+						   u_size, m->write);
 			if (rc != 0)
 				goto err_out;

--- a/drivers/misc/genwqe/card_utils.c
+++ b/drivers/misc/genwqe/card_utils.c
@ -296,7 +296,7 @@ static int genwqe_sgl_size(int num_pages)
 * from user-space into the cached pages.
 */
 int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
-			  void __user *user_addr, size_t user_size)
+			  void __user *user_addr, size_t user_size, int write)
 {
 	int rc;
 	struct pci_dev *pci_dev = cd->pci_dev;
@ -312,6 +312,7 @@ int genwqe_alloc_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,

 	sgl->user_addr = user_addr;
 	sgl->user_size = user_size;
+	sgl->write = write;
 	sgl->sgl_size = genwqe_sgl_size(sgl->nr_pages);

 	if (get_order(sgl->sgl_size) > MAX_ORDER) {
@ -476,14 +477,20 @@ int genwqe_setup_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl,
 int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
 {
 	int rc = 0;
+	size_t offset;
+	unsigned long res;
 	struct pci_dev *pci_dev = cd->pci_dev;

 	if (sgl->fpage) {
-		if (copy_to_user(sgl->user_addr, sgl->fpage + sgl->fpage_offs,
-				 sgl->fpage_size)) {
-			dev_err(&pci_dev->dev, "[%s] err: copying fpage!\n",
-				__func__);
-			rc = -EFAULT;
+		if (sgl->write) {
+			res = copy_to_user(sgl->user_addr,
+				sgl->fpage + sgl->fpage_offs, sgl->fpage_size);
+			if (res) {
+				dev_err(&pci_dev->dev,
+					"[%s] err: copying fpage! (res=%lu)\n",
+					__func__, res);
+				rc = -EFAULT;
+			}
 		}
 		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->fpage,
 					 sgl->fpage_dma_addr);
@ -491,12 +498,16 @@ int genwqe_free_sync_sgl(struct genwqe_dev *cd, struct genwqe_sgl *sgl)
 		sgl->fpage_dma_addr = 0;
 	}
 	if (sgl->lpage) {
-		if (copy_to_user(sgl->user_addr + sgl->user_size -
-				 sgl->lpage_size, sgl->lpage,
-				 sgl->lpage_size)) {
-			dev_err(&pci_dev->dev, "[%s] err: copying lpage!\n",
-				__func__);
-			rc = -EFAULT;
+		if (sgl->write) {
+			offset = sgl->user_size - sgl->lpage_size;
+			res = copy_to_user(sgl->user_addr + offset, sgl->lpage,
+					   sgl->lpage_size);
+			if (res) {
+				dev_err(&pci_dev->dev,
+					"[%s] err: copying lpage! (res=%lu)\n",
+					__func__, res);
+				rc = -EFAULT;
+			}
 		}
 		__genwqe_free_consistent(cd, PAGE_SIZE, sgl->lpage,
 					 sgl->lpage_dma_addr);
@ -599,14 +610,14 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
 	/* pin user pages in memory */
 	rc = get_user_pages_fast(data & PAGE_MASK, /* page aligned addr */
 				 m->nr_pages,
-				 1,		/* write by caller */
+				 m->write,		/* readable/writable */
 				 m->page_list);	/* ptrs to pages */
 	if (rc < 0)
 		goto fail_get_user_pages;

 	/* assumption: get_user_pages can be killed by signals. */
 	if (rc < m->nr_pages) {
-		free_user_pages(m->page_list, rc, 0);
+		free_user_pages(m->page_list, rc, m->write);
 		rc = -EFAULT;
 		goto fail_get_user_pages;
 	}
@ -618,7 +629,7 @@ int genwqe_user_vmap(struct genwqe_dev *cd, struct dma_mapping *m, void *uaddr,
 	return 0;

 fail_free_user_pages:
-	free_user_pages(m->page_list, m->nr_pages, 0);
+	free_user_pages(m->page_list, m->nr_pages, m->write);

 fail_get_user_pages:
 	kfree(m->page_list);
@ -651,7 +662,7 @@ int genwqe_user_vunmap(struct genwqe_dev *cd, struct dma_mapping *m,
 		genwqe_unmap_pages(cd, m->dma_list, m->nr_pages);

 	if (m->page_list) {
-		free_user_pages(m->page_list, m->nr_pages, 1);
+		free_user_pages(m->page_list, m->nr_pages, m->write);

 		kfree(m->page_list);
 		m->page_list = NULL;
--- a/drivers/misc/lkdtm_core.c
+++ b/drivers/misc/lkdtm_core.c
@ -122,7 +122,7 @@ struct crashtype {
 	}

 /* Define the possible types of crashes that can be triggered. */
-struct crashtype crashtypes[] = {
+static const struct crashtype crashtypes[] = {
 	CRASHTYPE(PANIC),
 	CRASHTYPE(BUG),
 	CRASHTYPE(WARNING),
@ -188,8 +188,8 @@ struct crashtype crashtypes[] = {

 /* Global kprobe entry and crashtype. */
 static struct kprobe *lkdtm_kprobe;
-struct crashpoint *lkdtm_crashpoint;
-struct crashtype *lkdtm_crashtype;
+static struct crashpoint *lkdtm_crashpoint;
+static const struct crashtype *lkdtm_crashtype;

 /* Module parameters */
 static int recur_count = -1;
@ -212,7 +212,7 @@ MODULE_PARM_DESC(cpoint_count, " Crash Point Count, number of times the "\


 /* Return the crashtype number or NULL if the name is invalid */
-static struct crashtype *find_crashtype(const char *name)
+static const struct crashtype *find_crashtype(const char *name)
 {
 	int i;

@ -228,7 +228,7 @@ static struct crashtype *find_crashtype(const char *name)
 * This is forced noinline just so it distinctly shows up in the stackdump
 * which makes validation of expected lkdtm crashes easier.
 */
-static noinline void lkdtm_do_action(struct crashtype *crashtype)
+static noinline void lkdtm_do_action(const struct crashtype *crashtype)
 {
 	if (WARN_ON(!crashtype || !crashtype->func))
 		return;
@ -236,7 +236,7 @@ static noinline void lkdtm_do_action(struct crashtype *crashtype)
 }

 static int lkdtm_register_cpoint(struct crashpoint *crashpoint,
-				 struct crashtype *crashtype)
+				 const struct crashtype *crashtype)
 {
 	int ret;

@ -300,7 +300,7 @@ static ssize_t lkdtm_debugfs_entry(struct file *f,
 				   size_t count, loff_t *off)
 {
 	struct crashpoint *crashpoint = file_inode(f)->i_private;
-	struct crashtype *crashtype = NULL;
+	const struct crashtype *crashtype = NULL;
 	char *buf;
 	int err;

@ -368,7 +368,7 @@ static int lkdtm_debugfs_open(struct inode *inode, struct file *file)
 static ssize_t direct_entry(struct file *f, const char __user *user_buf,
 		size_t count, loff_t *off)
 {
-	struct crashtype *crashtype;
+	const struct crashtype *crashtype;
 	char *buf;

 	if (count >= PAGE_SIZE)
@ -404,7 +404,7 @@ static struct dentry *lkdtm_debugfs_root;
 static int __init lkdtm_module_init(void)
 {
 	struct crashpoint *crashpoint = NULL;
-	struct crashtype *crashtype = NULL;
+	const struct crashtype *crashtype = NULL;
 	int ret = -EINVAL;
 	int i;

--- a/drivers/misc/mei/mei-trace.c
+++ b/drivers/misc/mei/mei-trace.c
@ -23,5 +23,4 @@
 EXPORT_TRACEPOINT_SYMBOL(mei_reg_read);
 EXPORT_TRACEPOINT_SYMBOL(mei_reg_write);
 EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_read);
-EXPORT_TRACEPOINT_SYMBOL(mei_pci_cfg_write);
 #endif /* __CHECKER__ */
--- a/drivers/misc/mei/mei-trace.h
+++ b/drivers/misc/mei/mei-trace.h
@ -83,25 +83,6 @@ TRACE_EVENT(mei_pci_cfg_read,
 		  __get_str(dev), __entry->reg, __entry->offs, __entry->val)
 );

-TRACE_EVENT(mei_pci_cfg_write,
-	TP_PROTO(const struct device *dev, const char *reg, u32 offs, u32 val),
-	TP_ARGS(dev, reg, offs, val),
-	TP_STRUCT__entry(
-		__string(dev, dev_name(dev))
-		__field(const char *, reg)
-		__field(u32, offs)
-		__field(u32, val)
-	),
-	TP_fast_assign(
-		__assign_str(dev, dev_name(dev))
-		__entry->reg = reg;
-		__entry->offs = offs;
-		__entry->val = val;
-	),
-	TP_printk("[%s] pci cfg write %s[%#x] = %#x",
-		  __get_str(dev), __entry->reg,  __entry->offs, __entry->val)
-);
-
 #endif /* _MEI_TRACE_H_ */

 /* This part must be outside protection */
--- a/drivers/misc/mic/Kconfig
+++ b/drivers/misc/mic/Kconfig
@ -1,3 +1,5 @@
+menu "Intel MIC & related support"
+
 comment "Intel MIC Bus Driver"

 config INTEL_MIC_BUS
@ -150,3 +152,5 @@ config VOP
 if VOP
 source "drivers/vhost/Kconfig.vringh"
 endif
+
+endmenu
--- a/drivers/nvmem/Kconfig
+++ b/drivers/nvmem/Kconfig
@ -123,6 +123,17 @@ config NVMEM_SUNXI_SID
 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_sunxi_sid.

+config UNIPHIER_EFUSE
+	tristate "UniPhier SoCs eFuse support"
+	depends on ARCH_UNIPHIER || COMPILE_TEST
+	depends on HAS_IOMEM
+	help
+	  This is a simple driver to dump specified values of UniPhier SoC
+	  from eFuse.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-uniphier-efuse.
+
 config NVMEM_VF610_OCOTP
 	tristate "VF610 SoC OCOTP support"
 	depends on SOC_VF610 || COMPILE_TEST
@ -135,13 +146,33 @@ config NVMEM_VF610_OCOTP
 	  be called nvmem-vf610-ocotp.

 config MESON_EFUSE
-	tristate "Amlogic eFuse Support"
+	tristate "Amlogic Meson GX eFuse Support"
 	depends on (ARCH_MESON || COMPILE_TEST) && MESON_SM
 	help
 	  This is a driver to retrieve specific values from the eFuse found on
-	  the Amlogic Meson SoCs.
+	  the Amlogic Meson GX SoCs.

 	  This driver can also be built as a module. If so, the module
 	  will be called nvmem_meson_efuse.

+config MESON_MX_EFUSE
+	tristate "Amlogic Meson6/Meson8/Meson8b eFuse Support"
+	depends on ARCH_MESON || COMPILE_TEST
+	help
+	  This is a driver to retrieve specific values from the eFuse found on
+	  the Amlogic Meson6, Meson8 and Meson8b SoCs.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem_meson_mx_efuse.
+
+config NVMEM_SNVS_LPGPR
+	tristate "Support for Low Power General Purpose Register"
+	depends on SOC_IMX6 || COMPILE_TEST
+	help
+	  This is a driver for Low Power General Purpose Register (LPGPR) available on
+	  i.MX6 SoCs in Secure Non-Volatile Storage (SNVS) of this chip.
+
+	  This driver can also be built as a module. If so, the module
+	  will be called nvmem-snvs-lpgpr.
+
 endif
--- a/drivers/nvmem/Makefile
+++ b/drivers/nvmem/Makefile
@ -27,7 +27,13 @@ obj-$(CONFIG_ROCKCHIP_EFUSE)	+= nvmem_rockchip_efuse.o
 nvmem_rockchip_efuse-y		:= rockchip-efuse.o
 obj-$(CONFIG_NVMEM_SUNXI_SID)	+= nvmem_sunxi_sid.o
 nvmem_sunxi_sid-y		:= sunxi_sid.o
+obj-$(CONFIG_UNIPHIER_EFUSE)	+= nvmem-uniphier-efuse.o
+nvmem-uniphier-efuse-y		:= uniphier-efuse.o
 obj-$(CONFIG_NVMEM_VF610_OCOTP)	+= nvmem-vf610-ocotp.o
 nvmem-vf610-ocotp-y		:= vf610-ocotp.o
 obj-$(CONFIG_MESON_EFUSE)	+= nvmem_meson_efuse.o
 nvmem_meson_efuse-y		:= meson-efuse.o
+obj-$(CONFIG_MESON_MX_EFUSE)	+= nvmem_meson_mx_efuse.o
+nvmem_meson_mx_efuse-y		:= meson-mx-efuse.o
+obj-$(CONFIG_NVMEM_SNVS_LPGPR)	+= nvmem_snvs_lpgpr.o
+nvmem_snvs_lpgpr-y		:= snvs_lpgpr.o
--- a/drivers/nvmem/bcm-ocotp.c
+++ b/drivers/nvmem/bcm-ocotp.c
@ -232,7 +232,6 @@ static struct nvmem_config bcm_otpc_nvmem_config = {
 	.read_only = false,
 	.word_size = 4,
 	.stride = 4,
-	.owner = THIS_MODULE,
 	.reg_read = bcm_otpc_read,
 	.reg_write = bcm_otpc_write,
 };
--- a/drivers/nvmem/core.c
+++ b/drivers/nvmem/core.c
@ -462,6 +462,8 @@ struct nvmem_device *nvmem_register(const struct nvmem_config *config)

 	nvmem->id = rval;
 	nvmem->owner = config->owner;
+	if (!nvmem->owner && config->dev->driver)
+		nvmem->owner = config->dev->driver->owner;
 	nvmem->stride = config->stride;
 	nvmem->word_size = config->word_size;
 	nvmem->size = config->size;
@ -615,7 +617,7 @@ static struct nvmem_device *nvmem_find(const char *name)
 	return to_nvmem_device(d);
 }

-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
 /**
 * of_nvmem_device_get() - Get nvmem device from a given id
 *
@ -753,7 +755,7 @@ static struct nvmem_cell *nvmem_cell_get_from_list(const char *cell_id)
 	return cell;
 }

-#if IS_ENABLED(CONFIG_NVMEM) && IS_ENABLED(CONFIG_OF)
+#if IS_ENABLED(CONFIG_OF)
 /**
 * of_nvmem_cell_get() - Get a nvmem cell from given device node and cell id
 *
@ -946,8 +948,7 @@ void nvmem_cell_put(struct nvmem_cell *cell)
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_put);

-static inline void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell,
-						    void *buf)
+static void nvmem_shift_read_buffer_in_place(struct nvmem_cell *cell, void *buf)
 {
 	u8 *p, *b;
 	int i, bit_offset = cell->bit_offset;
@ -1028,8 +1029,8 @@ void *nvmem_cell_read(struct nvmem_cell *cell, size_t *len)
 }
 EXPORT_SYMBOL_GPL(nvmem_cell_read);

-static inline void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
-						    u8 *_buf, int len)
+static void *nvmem_cell_prepare_write_buffer(struct nvmem_cell *cell,
+					     u8 *_buf, int len)
 {
 	struct nvmem_device *nvmem = cell->nvmem;
 	int i, rc, nbits, bit_offset = cell->bit_offset;
--- a/drivers/nvmem/imx-iim.c
+++ b/drivers/nvmem/imx-iim.c
@ -34,7 +34,6 @@ struct imx_iim_drvdata {
 struct iim_priv {
 	void __iomem *base;
 	struct clk *clk;
-	struct nvmem_config nvmem;
 };

 static int imx_iim_read(void *context, unsigned int offset,
@ -108,7 +107,7 @@ static int imx_iim_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct iim_priv *iim;
 	struct nvmem_device *nvmem;
-	struct nvmem_config *cfg;
+	struct nvmem_config cfg = {};
 	const struct imx_iim_drvdata *drvdata = NULL;

 	iim = devm_kzalloc(dev, sizeof(*iim), GFP_KERNEL);
@ -130,19 +129,16 @@ static int imx_iim_probe(struct platform_device *pdev)
 	if (IS_ERR(iim->clk))
 		return PTR_ERR(iim->clk);

-	cfg = &iim->nvmem;
+	cfg.name = "imx-iim",
+	cfg.read_only = true,
+	cfg.word_size = 1,
+	cfg.stride = 1,
+	cfg.reg_read = imx_iim_read,
+	cfg.dev = dev;
+	cfg.size = drvdata->nregs;
+	cfg.priv = iim;

-	cfg->name = "imx-iim",
-	cfg->read_only = true,
-	cfg->word_size = 1,
-	cfg->stride = 1,
-	cfg->owner = THIS_MODULE,
-	cfg->reg_read = imx_iim_read,
-	cfg->dev = dev;
-	cfg->size = drvdata->nregs;
-	cfg->priv = iim;
-
-	nvmem = nvmem_register(cfg);
+	nvmem = nvmem_register(&cfg);
 	if (IS_ERR(nvmem))
 		return PTR_ERR(nvmem);

--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@ -40,14 +40,19 @@
 #define IMX_OCOTP_ADDR_CTRL_SET		0x0004
 #define IMX_OCOTP_ADDR_CTRL_CLR		0x0008
 #define IMX_OCOTP_ADDR_TIMING		0x0010
-#define IMX_OCOTP_ADDR_DATA		0x0020
+#define IMX_OCOTP_ADDR_DATA0		0x0020
+#define IMX_OCOTP_ADDR_DATA1		0x0030
+#define IMX_OCOTP_ADDR_DATA2		0x0040
+#define IMX_OCOTP_ADDR_DATA3		0x0050

 #define IMX_OCOTP_BM_CTRL_ADDR		0x0000007F
 #define IMX_OCOTP_BM_CTRL_BUSY		0x00000100
 #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
 #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400

-#define DEF_RELAX			20 /* > 16.5ns */
+#define DEF_RELAX			20	/* > 16.5ns */
+#define DEF_FSOURCE			1001	/* > 1000 ns */
+#define DEF_STROBE_PROG			10000	/* IPG clocks */
 #define IMX_OCOTP_WR_UNLOCK		0x3E770000
 #define IMX_OCOTP_READ_LOCKED_VAL	0xBADABADA

@ -57,10 +62,16 @@ struct ocotp_priv {
 	struct device *dev;
 	struct clk *clk;
 	void __iomem *base;
-	unsigned int nregs;
+	const struct ocotp_params *params;
 	struct nvmem_config *config;
 };

+struct ocotp_params {
+	unsigned int nregs;
+	unsigned int bank_address_words;
+	void (*set_timing)(struct ocotp_priv *priv);
+};
+
 static int imx_ocotp_wait_for_busy(void __iomem *base, u32 flags)
 {
 	int count;
@ -121,8 +132,8 @@ static int imx_ocotp_read(void *context, unsigned int offset,
 	index = offset >> 2;
 	count = bytes >> 2;

-	if (count > (priv->nregs - index))
-		count = priv->nregs - index;
+	if (count > (priv->params->nregs - index))
+		count = priv->params->nregs - index;

 	mutex_lock(&ocotp_mutex);

@ -160,32 +171,11 @@ read_end:
 	return ret;
 }

-static int imx_ocotp_write(void *context, unsigned int offset, void *val,
-			   size_t bytes)
+static void imx_ocotp_set_imx6_timing(struct ocotp_priv *priv)
 {
-	struct ocotp_priv *priv = context;
-	u32 *buf = val;
-	int ret;
-
 	unsigned long clk_rate = 0;
 	unsigned long strobe_read, relax, strobe_prog;
 	u32 timing = 0;
-	u32 ctrl;
-	u8 waddr;
-
-	/* allow only writing one complete OTP word at a time */
-	if ((bytes != priv->config->word_size) ||
-	    (offset % priv->config->word_size))
-		return -EINVAL;
-
-	mutex_lock(&ocotp_mutex);
-
-	ret = clk_prepare_enable(priv->clk);
-	if (ret < 0) {
-		mutex_unlock(&ocotp_mutex);
-		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
-		return ret;
-	}

 	/* 47.3.1.3.1
 	 * Program HW_OCOTP_TIMING[STROBE_PROG] and HW_OCOTP_TIMING[RELAX]
@ -204,6 +194,56 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	timing |= (strobe_read << 16) & 0x003F0000;

 	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static void imx_ocotp_set_imx7_timing(struct ocotp_priv *priv)
+{
+	unsigned long clk_rate = 0;
+	u64 fsource, strobe_prog;
+	u32 timing = 0;
+
+	/* i.MX 7Solo Applications Processor Reference Manual, Rev. 0.1
+	 * 6.4.3.3
+	 */
+	clk_rate = clk_get_rate(priv->clk);
+	fsource = DIV_ROUND_UP_ULL((u64)clk_rate * DEF_FSOURCE,
+				   NSEC_PER_SEC) + 1;
+	strobe_prog = DIV_ROUND_CLOSEST_ULL((u64)clk_rate * DEF_STROBE_PROG,
+					    NSEC_PER_SEC) + 1;
+
+	timing = strobe_prog & 0x00000FFF;
+	timing |= (fsource << 12) & 0x000FF000;
+
+	writel(timing, priv->base + IMX_OCOTP_ADDR_TIMING);
+}
+
+static int imx_ocotp_write(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct ocotp_priv *priv = context;
+	u32 *buf = val;
+	int ret;
+
+	u32 ctrl;
+	u8 waddr;
+	u8 word = 0;
+
+	/* allow only writing one complete OTP word at a time */
+	if ((bytes != priv->config->word_size) ||
+	    (offset % priv->config->word_size))
+		return -EINVAL;
+
+	mutex_lock(&ocotp_mutex);
+
+	ret = clk_prepare_enable(priv->clk);
+	if (ret < 0) {
+		mutex_unlock(&ocotp_mutex);
+		dev_err(priv->dev, "failed to prepare/enable ocotp clk\n");
+		return ret;
+	}
+
+	/* Setup the write timing values */
+	priv->params->set_timing(priv);

 	/* 47.3.1.3.2
 	 * Check that HW_OCOTP_CTRL[BUSY] and HW_OCOTP_CTRL[ERROR] are clear.
@ -224,8 +264,23 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * description. Both the unlock code and address can be written in the
 	 * same operation.
 	 */
-	/* OTP write/read address specifies one of 128 word address locations */
-	waddr = offset / 4;
+	if (priv->params->bank_address_words != 0) {
+		/*
+		 * In banked/i.MX7 mode the OTP register bank goes into waddr
+		 * see i.MX 7Solo Applications Processor Reference Manual, Rev.
+		 * 0.1 section 6.4.3.1
+		 */
+		offset = offset / priv->config->word_size;
+		waddr = offset / priv->params->bank_address_words;
+		word  = offset & (priv->params->bank_address_words - 1);
+	} else {
+		/*
+		 * Non-banked i.MX6 mode.
+		 * OTP write/read address specifies one of 128 word address
+		 * locations
+		 */
+		waddr = offset / 4;
+	}

 	ctrl = readl(priv->base + IMX_OCOTP_ADDR_CTRL);
 	ctrl &= ~IMX_OCOTP_BM_CTRL_ADDR;
@ -251,8 +306,43 @@ static int imx_ocotp_write(void *context, unsigned int offset, void *val,
 	 * shift right (with zero fill). This shifting is required to program
 	 * the OTP serially. During the write operation, HW_OCOTP_DATA cannot be
 	 * modified.
+	 * Note: on i.MX7 there are four data fields to write for banked write
+	 *       with the fuse blowing operation only taking place after data0
+	 *	 has been written. This is why data0 must always be the last
+	 *	 register written.
 	 */
-	writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA);
+	if (priv->params->bank_address_words != 0) {
+		/* Banked/i.MX7 mode */
+		switch (word) {
+		case 0:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 1:
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 2:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		case 3:
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA1);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA2);
+			writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA3);
+			writel(0, priv->base + IMX_OCOTP_ADDR_DATA0);
+			break;
+		}
+	} else {
+		/* Non-banked i.MX6 mode */
+		writel(*buf, priv->base + IMX_OCOTP_ADDR_DATA0);
+	}

 	/* 47.4.1.4.5
 	 * Once complete, the controller will clear BUSY. A write request to a
@ -303,17 +393,46 @@ static struct nvmem_config imx_ocotp_nvmem_config = {
 	.read_only = false,
 	.word_size = 4,
 	.stride = 4,
-	.owner = THIS_MODULE,
 	.reg_read = imx_ocotp_read,
 	.reg_write = imx_ocotp_write,
 };

+static const struct ocotp_params imx6q_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sl_params = {
+	.nregs = 64,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6sx_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx6ul_params = {
+	.nregs = 128,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+};
+
+static const struct ocotp_params imx7d_params = {
+	.nregs = 64,
+	.bank_address_words = 4,
+	.set_timing = imx_ocotp_set_imx7_timing,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
-	{ .compatible = "fsl,imx6q-ocotp",  (void *)128 },
-	{ .compatible = "fsl,imx6sl-ocotp", (void *)64 },
-	{ .compatible = "fsl,imx6sx-ocotp", (void *)128 },
-	{ .compatible = "fsl,imx6ul-ocotp", (void *)128 },
-	{ .compatible = "fsl,imx7d-ocotp", (void *)64 },
+	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
+	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
+	{ .compatible = "fsl,imx6sx-ocotp", .data = &imx6sx_params },
+	{ .compatible = "fsl,imx6ul-ocotp", .data = &imx6ul_params },
+	{ .compatible = "fsl,imx7d-ocotp",  .data = &imx7d_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
@ -342,8 +461,8 @@ static int imx_ocotp_probe(struct platform_device *pdev)
 		return PTR_ERR(priv->clk);

 	of_id = of_match_device(imx_ocotp_dt_ids, dev);
-	priv->nregs = (unsigned long)of_id->data;
-	imx_ocotp_nvmem_config.size = 4 * priv->nregs;
+	priv->params = of_device_get_match_data(&pdev->dev);
+	imx_ocotp_nvmem_config.size = 4 * priv->params->nregs;
 	imx_ocotp_nvmem_config.dev = dev;
 	imx_ocotp_nvmem_config.priv = priv;
 	priv->config = &imx_ocotp_nvmem_config;
@ -375,5 +494,5 @@ static struct platform_driver imx_ocotp_driver = {
 module_platform_driver(imx_ocotp_driver);

 MODULE_AUTHOR("Philipp Zabel <p.zabel@pengutronix.de>");
-MODULE_DESCRIPTION("i.MX6 OCOTP fuse box driver");
+MODULE_DESCRIPTION("i.MX6/i.MX7 OCOTP fuse box driver");
 MODULE_LICENSE("GPL v2");
--- a/drivers/nvmem/lpc18xx_eeprom.c
+++ b/drivers/nvmem/lpc18xx_eeprom.c
@ -159,7 +159,6 @@ static struct nvmem_config lpc18xx_nvmem_config = {
 	.word_size = 4,
 	.reg_read = lpc18xx_eeprom_read,
 	.reg_write = lpc18xx_eeprom_gather_write,
-	.owner = THIS_MODULE,
 };

 static int lpc18xx_eeprom_probe(struct platform_device *pdev)
--- a/drivers/nvmem/lpc18xx_otp.c
+++ b/drivers/nvmem/lpc18xx_otp.c
@ -64,7 +64,6 @@ static struct nvmem_config lpc18xx_otp_nvmem_config = {
 	.read_only = true,
 	.word_size = LPC18XX_OTP_WORD_SIZE,
 	.stride = LPC18XX_OTP_WORD_SIZE,
-	.owner = THIS_MODULE,
 	.reg_read = lpc18xx_otp_read,
 };

--- a/drivers/nvmem/meson-efuse.c
+++ b/drivers/nvmem/meson-efuse.c
@ -1,5 +1,5 @@
 /*
- * Amlogic eFuse Driver
+ * Amlogic Meson GX eFuse Driver
 *
 * Copyright (c) 2016 Endless Computers, Inc.
 * Author: Carlo Caione <carlo@endlessm.com>
@ -37,7 +37,6 @@ static int meson_efuse_read(void *context, unsigned int offset,

 static struct nvmem_config econfig = {
 	.name = "meson-efuse",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.read_only = true,
@ -89,5 +88,5 @@ static struct platform_driver meson_efuse_driver = {
 module_platform_driver(meson_efuse_driver);

 MODULE_AUTHOR("Carlo Caione <carlo@endlessm.com>");
-MODULE_DESCRIPTION("Amlogic Meson NVMEM driver");
+MODULE_DESCRIPTION("Amlogic Meson GX NVMEM driver");
 MODULE_LICENSE("GPL v2");
--- a/drivers/nvmem/meson-mx-efuse.c
+++ b/drivers/nvmem/meson-mx-efuse.c
@ -0,0 +1,265 @@
+/*
+ * Amlogic Meson6, Meson8 and Meson8b eFuse Driver
+ *
+ * Copyright (c) 2017 Martin Blumenstingl <martin.blumenstingl@googlemail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ */
+
+#include <linux/bitfield.h>
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/sizes.h>
+#include <linux/slab.h>
+
+#define MESON_MX_EFUSE_CNTL1					0x04
+#define MESON_MX_EFUSE_CNTL1_PD_ENABLE				BIT(27)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY			BIT(26)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_START			BIT(25)
+#define MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE			BIT(24)
+#define MESON_MX_EFUSE_CNTL1_BYTE_WR_DATA			GENMASK(23, 16)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_BUSY			BIT(14)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_START			BIT(13)
+#define MESON_MX_EFUSE_CNTL1_AUTO_WR_ENABLE			BIT(12)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET			BIT(11)
+#define MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK			GENMASK(10, 0)
+
+#define MESON_MX_EFUSE_CNTL2					0x08
+
+#define MESON_MX_EFUSE_CNTL4					0x10
+#define MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE			BIT(10)
+
+struct meson_mx_efuse_platform_data {
+	const char *name;
+	unsigned int word_size;
+};
+
+struct meson_mx_efuse {
+	void __iomem *base;
+	struct clk *core_clk;
+	struct nvmem_device *nvmem;
+	struct nvmem_config config;
+};
+
+static void meson_mx_efuse_mask_bits(struct meson_mx_efuse *efuse, u32 reg,
+				     u32 mask, u32 set)
+{
+	u32 data;
+
+	data = readl(efuse->base + reg);
+	data &= ~mask;
+	data |= (set & mask);
+
+	writel(data, efuse->base + reg);
+}
+
+static int meson_mx_efuse_hw_enable(struct meson_mx_efuse *efuse)
+{
+	int err;
+
+	err = clk_prepare_enable(efuse->core_clk);
+	if (err)
+		return err;
+
+	/* power up the efuse */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE, 0);
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL4,
+				 MESON_MX_EFUSE_CNTL4_ENCRYPT_ENABLE, 0);
+
+	return 0;
+}
+
+static void meson_mx_efuse_hw_disable(struct meson_mx_efuse *efuse)
+{
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_PD_ENABLE);
+
+	clk_disable_unprepare(efuse->core_clk);
+}
+
+static int meson_mx_efuse_read_addr(struct meson_mx_efuse *efuse,
+				    unsigned int addr, u32 *value)
+{
+	int err;
+	u32 regval;
+
+	/* write the address to read */
+	regval = FIELD_PREP(MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, addr);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_MASK, regval);
+
+	/* inform the hardware that we changed the address */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_BYTE_ADDR_SET, 0);
+
+	/* start the read process */
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START);
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_START, 0);
+
+	/*
+	 * perform a dummy read to ensure that the HW has the RD_BUSY bit set
+	 * when polling for the status below.
+	 */
+	readl(efuse->base + MESON_MX_EFUSE_CNTL1);
+
+	err = readl_poll_timeout_atomic(efuse->base + MESON_MX_EFUSE_CNTL1,
+			regval,
+			(!(regval & MESON_MX_EFUSE_CNTL1_AUTO_RD_BUSY)),
+			1, 1000);
+	if (err) {
+		dev_err(efuse->config.dev,
+			"Timeout while reading efuse address %u\n", addr);
+		return err;
+	}
+
+	*value = readl(efuse->base + MESON_MX_EFUSE_CNTL2);
+
+	return 0;
+}
+
+static int meson_mx_efuse_read(void *context, unsigned int offset,
+			       void *buf, size_t bytes)
+{
+	struct meson_mx_efuse *efuse = context;
+	u32 tmp;
+	int err, i, addr;
+
+	err = meson_mx_efuse_hw_enable(efuse);
+	if (err)
+		return err;
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE);
+
+	for (i = offset; i < offset + bytes; i += efuse->config.word_size) {
+		addr = i / efuse->config.word_size;
+
+		err = meson_mx_efuse_read_addr(efuse, addr, &tmp);
+		if (err)
+			break;
+
+		memcpy(buf + i, &tmp, efuse->config.word_size);
+	}
+
+	meson_mx_efuse_mask_bits(efuse, MESON_MX_EFUSE_CNTL1,
+				 MESON_MX_EFUSE_CNTL1_AUTO_RD_ENABLE, 0);
+
+	meson_mx_efuse_hw_disable(efuse);
+
+	return err;
+}
+
+static const struct meson_mx_efuse_platform_data meson6_efuse_data = {
+	.name = "meson6-efuse",
+	.word_size = 1,
+};
+
+static const struct meson_mx_efuse_platform_data meson8_efuse_data = {
+	.name = "meson8-efuse",
+	.word_size = 4,
+};
+
+static const struct meson_mx_efuse_platform_data meson8b_efuse_data = {
+	.name = "meson8b-efuse",
+	.word_size = 4,
+};
+
+static const struct of_device_id meson_mx_efuse_match[] = {
+	{ .compatible = "amlogic,meson6-efuse", .data = &meson6_efuse_data },
+	{ .compatible = "amlogic,meson8-efuse", .data = &meson8_efuse_data },
+	{ .compatible = "amlogic,meson8b-efuse", .data = &meson8b_efuse_data },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, meson_mx_efuse_match);
+
+static int meson_mx_efuse_probe(struct platform_device *pdev)
+{
+	const struct meson_mx_efuse_platform_data *drvdata;
+	struct meson_mx_efuse *efuse;
+	struct resource *res;
+
+	drvdata = of_device_get_match_data(&pdev->dev);
+	if (!drvdata)
+		return -EINVAL;
+
+	efuse = devm_kzalloc(&pdev->dev, sizeof(*efuse), GFP_KERNEL);
+	if (!efuse)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	efuse->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(efuse->base))
+		return PTR_ERR(efuse->base);
+
+	efuse->config.name = devm_kstrdup(&pdev->dev, drvdata->name,
+					  GFP_KERNEL);
+	efuse->config.owner = THIS_MODULE;
+	efuse->config.dev = &pdev->dev;
+	efuse->config.priv = efuse;
+	efuse->config.stride = drvdata->word_size;
+	efuse->config.word_size = drvdata->word_size;
+	efuse->config.size = SZ_512;
+	efuse->config.read_only = true;
+	efuse->config.reg_read = meson_mx_efuse_read;
+
+	efuse->core_clk = devm_clk_get(&pdev->dev, "core");
+	if (IS_ERR(efuse->core_clk)) {
+		dev_err(&pdev->dev, "Failed to get core clock\n");
+		return PTR_ERR(efuse->core_clk);
+	}
+
+	efuse->nvmem = nvmem_register(&efuse->config);
+	if (IS_ERR(efuse->nvmem))
+		return PTR_ERR(efuse->nvmem);
+
+	platform_set_drvdata(pdev, efuse);
+
+	return 0;
+}
+
+static int meson_mx_efuse_remove(struct platform_device *pdev)
+{
+	struct meson_mx_efuse *efuse = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(efuse->nvmem);
+}
+
+static struct platform_driver meson_mx_efuse_driver = {
+	.probe = meson_mx_efuse_probe,
+	.remove = meson_mx_efuse_remove,
+	.driver = {
+		.name = "meson-mx-efuse",
+		.of_match_table = meson_mx_efuse_match,
+	},
+};
+
+module_platform_driver(meson_mx_efuse_driver);
+
+MODULE_AUTHOR("Martin Blumenstingl <martin.blumenstingl@googlemail.com>");
+MODULE_DESCRIPTION("Amlogic Meson MX eFuse NVMEM driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/nvmem/mtk-efuse.c
+++ b/drivers/nvmem/mtk-efuse.c
@ -18,15 +18,19 @@
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>

+struct mtk_efuse_priv {
+	void __iomem *base;
+};
+
 static int mtk_reg_read(void *context,
 			unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct mtk_efuse_priv *priv = context;
 	u32 *val = _val;
 	int i = 0, words = bytes / 4;

 	while (words--)
-		*val++ = readl(base + reg + (i++ * 4));
+		*val++ = readl(priv->base + reg + (i++ * 4));

 	return 0;
 }
@ -34,12 +38,12 @@ static int mtk_reg_read(void *context,
 static int mtk_reg_write(void *context,
 			 unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct mtk_efuse_priv *priv = context;
 	u32 *val = _val;
 	int i = 0, words = bytes / 4;

 	while (words--)
-		writel(*val++, base + reg + (i++ * 4));
+		writel(*val++, priv->base + reg + (i++ * 4));

 	return 0;
 }
@ -49,27 +53,26 @@ static int mtk_efuse_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct nvmem_device *nvmem;
-	struct nvmem_config *econfig;
-	void __iomem *base;
+	struct nvmem_config econfig = {};
+	struct mtk_efuse_priv *priv;

-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
-
-	econfig = devm_kzalloc(dev, sizeof(*econfig), GFP_KERNEL);
-	if (!econfig)
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
 		return -ENOMEM;

-	econfig->stride = 4;
-	econfig->word_size = 4;
-	econfig->reg_read = mtk_reg_read;
-	econfig->reg_write = mtk_reg_write;
-	econfig->size = resource_size(res);
-	econfig->priv = base;
-	econfig->dev = dev;
-	econfig->owner = THIS_MODULE;
-	nvmem = nvmem_register(econfig);
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 4;
+	econfig.word_size = 4;
+	econfig.reg_read = mtk_reg_read;
+	econfig.reg_write = mtk_reg_write;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = nvmem_register(&econfig);
 	if (IS_ERR(nvmem))
 		return PTR_ERR(nvmem);

--- a/drivers/nvmem/mxs-ocotp.c
+++ b/drivers/nvmem/mxs-ocotp.c
@ -118,7 +118,6 @@ static struct nvmem_config ocotp_config = {
 	.name = "mxs-ocotp",
 	.stride = 16,
 	.word_size = 4,
-	.owner = THIS_MODULE,
 	.reg_read = mxs_ocotp_read,
 };

--- a/drivers/nvmem/qfprom.c
+++ b/drivers/nvmem/qfprom.c
@ -17,15 +17,19 @@
 #include <linux/nvmem-provider.h>
 #include <linux/platform_device.h>

+struct qfprom_priv {
+	void __iomem *base;
+};
+
 static int qfprom_reg_read(void *context,
 			unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct qfprom_priv *priv = context;
 	u8 *val = _val;
 	int i = 0, words = bytes;

 	while (words--)
-		*val++ = readb(base + reg + i++);
+		*val++ = readb(priv->base + reg + i++);

 	return 0;
 }
@ -33,12 +37,12 @@ static int qfprom_reg_read(void *context,
 static int qfprom_reg_write(void *context,
 			 unsigned int reg, void *_val, size_t bytes)
 {
-	void __iomem *base = context;
+	struct qfprom_priv *priv = context;
 	u8 *val = _val;
 	int i = 0, words = bytes;

 	while (words--)
-		writeb(*val++, base + reg + i++);
+		writeb(*val++, priv->base + reg + i++);

 	return 0;
 }
@ -52,7 +56,6 @@ static int qfprom_remove(struct platform_device *pdev)

 static struct nvmem_config econfig = {
 	.name = "qfprom",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.reg_read = qfprom_reg_read,
@ -64,16 +67,20 @@ static int qfprom_probe(struct platform_device *pdev)
 	struct device *dev = &pdev->dev;
 	struct resource *res;
 	struct nvmem_device *nvmem;
-	void __iomem *base;
+	struct qfprom_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;

 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	base = devm_ioremap_resource(dev, res);
-	if (IS_ERR(base))
-		return PTR_ERR(base);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);

 	econfig.size = resource_size(res);
 	econfig.dev = dev;
-	econfig.priv = base;
+	econfig.priv = priv;

 	nvmem = nvmem_register(&econfig);
 	if (IS_ERR(nvmem))
--- a/drivers/nvmem/rockchip-efuse.c
+++ b/drivers/nvmem/rockchip-efuse.c
@ -149,7 +149,6 @@ static int rockchip_rk3399_efuse_read(void *context, unsigned int offset,

 static struct nvmem_config econfig = {
 	.name = "rockchip-efuse",
-	.owner = THIS_MODULE,
 	.stride = 1,
 	.word_size = 1,
 	.read_only = true,
@ -177,6 +176,10 @@ static const struct of_device_id rockchip_efuse_match[] = {
 		.compatible = "rockchip,rk3288-efuse",
 		.data = (void *)&rockchip_rk3288_efuse_read,
 	},
+	{
+		.compatible = "rockchip,rk3368-efuse",
+		.data = (void *)&rockchip_rk3288_efuse_read,
+	},
 	{
 		.compatible = "rockchip,rk3399-efuse",
 		.data = (void *)&rockchip_rk3399_efuse_read,
--- a/drivers/nvmem/snvs_lpgpr.c
+++ b/drivers/nvmem/snvs_lpgpr.c
@ -0,0 +1,156 @@
+/*
+ * Copyright (c) 2015 Pengutronix, Steffen Trumtrar <kernel@pengutronix.de>
+ * Copyright (c) 2017 Pengutronix, Oleksij Rempel <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+
+#define IMX6Q_SNVS_HPLR		0x00
+#define IMX6Q_GPR_SL		BIT(5)
+#define IMX6Q_SNVS_LPLR		0x34
+#define IMX6Q_GPR_HL		BIT(5)
+#define IMX6Q_SNVS_LPGPR	0x68
+
+struct snvs_lpgpr_cfg {
+	int offset;
+	int offset_hplr;
+	int offset_lplr;
+};
+
+struct snvs_lpgpr_priv {
+	struct device_d			*dev;
+	struct regmap			*regmap;
+	struct nvmem_config		cfg;
+	const struct snvs_lpgpr_cfg	*dcfg;
+};
+
+static const struct snvs_lpgpr_cfg snvs_lpgpr_cfg_imx6q = {
+	.offset		= IMX6Q_SNVS_LPGPR,
+	.offset_hplr	= IMX6Q_SNVS_HPLR,
+	.offset_lplr	= IMX6Q_SNVS_LPLR,
+};
+
+static int snvs_lpgpr_write(void *context, unsigned int offset, void *val,
+			    size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+	unsigned int lock_reg;
+	int ret;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_hplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX6Q_GPR_SL)
+		return -EPERM;
+
+	ret = regmap_read(priv->regmap, dcfg->offset_lplr, &lock_reg);
+	if (ret < 0)
+		return ret;
+
+	if (lock_reg & IMX6Q_GPR_HL)
+		return -EPERM;
+
+	return regmap_bulk_write(priv->regmap, dcfg->offset + offset, val,
+				bytes / 4);
+}
+
+static int snvs_lpgpr_read(void *context, unsigned int offset, void *val,
+			   size_t bytes)
+{
+	struct snvs_lpgpr_priv *priv = context;
+	const struct snvs_lpgpr_cfg *dcfg = priv->dcfg;
+
+	return regmap_bulk_read(priv->regmap, dcfg->offset + offset,
+			       val, bytes / 4);
+}
+
+static int snvs_lpgpr_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct device_node *node = dev->of_node;
+	struct device_node *syscon_node;
+	struct snvs_lpgpr_priv *priv;
+	struct nvmem_config *cfg;
+	struct nvmem_device *nvmem;
+	const struct snvs_lpgpr_cfg *dcfg;
+
+	if (!node)
+		return -ENOENT;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	dcfg = of_device_get_match_data(dev);
+	if (!dcfg)
+		return -EINVAL;
+
+	syscon_node = of_get_parent(node);
+	if (!syscon_node)
+		return -ENODEV;
+
+	priv->regmap = syscon_node_to_regmap(syscon_node);
+	of_node_put(syscon_node);
+	if (IS_ERR(priv->regmap))
+		return PTR_ERR(priv->regmap);
+
+	priv->dcfg = dcfg;
+
+	cfg = &priv->cfg;
+	cfg->priv = priv;
+	cfg->name = dev_name(dev);
+	cfg->dev = dev;
+	cfg->stride = 4,
+	cfg->word_size = 4,
+	cfg->size = 4,
+	cfg->owner = THIS_MODULE,
+	cfg->reg_read  = snvs_lpgpr_read,
+	cfg->reg_write = snvs_lpgpr_write,
+
+	nvmem = nvmem_register(cfg);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int snvs_lpgpr_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id snvs_lpgpr_dt_ids[] = {
+	{ .compatible = "fsl,imx6q-snvs-lpgpr", .data = &snvs_lpgpr_cfg_imx6q },
+	{ .compatible = "fsl,imx6ul-snvs-lpgpr",
+	  .data = &snvs_lpgpr_cfg_imx6q },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, snvs_lpgpr_dt_ids);
+
+static struct platform_driver snvs_lpgpr_driver = {
+	.probe	= snvs_lpgpr_probe,
+	.remove	= snvs_lpgpr_remove,
+	.driver = {
+		.name	= "snvs_lpgpr",
+		.of_match_table = snvs_lpgpr_dt_ids,
+	},
+};
+module_platform_driver(snvs_lpgpr_driver);
+
+MODULE_AUTHOR("Oleksij Rempel <o.rempel@pengutronix.de>");
+MODULE_DESCRIPTION("Low Power General Purpose Register in i.MX6 Secure Non-Volatile Storage");
+MODULE_LICENSE("GPL v2");
--- a/drivers/nvmem/sunxi_sid.c
+++ b/drivers/nvmem/sunxi_sid.c
@ -40,7 +40,6 @@ static struct nvmem_config econfig = {
 	.read_only = true,
 	.stride = 4,
 	.word_size = 1,
-	.owner = THIS_MODULE,
 };

 struct sunxi_sid_cfg {
@ -199,10 +198,16 @@ static const struct sunxi_sid_cfg sun8i_h3_cfg = {
 	.need_register_readout = true,
 };

+static const struct sunxi_sid_cfg sun50i_a64_cfg = {
+	.value_offset = 0x200,
+	.size = 0x100,
+};
+
 static const struct of_device_id sunxi_sid_of_match[] = {
 	{ .compatible = "allwinner,sun4i-a10-sid", .data = &sun4i_a10_cfg },
 	{ .compatible = "allwinner,sun7i-a20-sid", .data = &sun7i_a20_cfg },
 	{ .compatible = "allwinner,sun8i-h3-sid", .data = &sun8i_h3_cfg },
+	{ .compatible = "allwinner,sun50i-a64-sid", .data = &sun50i_a64_cfg },
 	{/* sentinel */},
 };
 MODULE_DEVICE_TABLE(of, sunxi_sid_of_match);
--- a/drivers/nvmem/uniphier-efuse.c
+++ b/drivers/nvmem/uniphier-efuse.c
@ -0,0 +1,97 @@
+/*
+ * UniPhier eFuse driver
+ *
+ * Copyright (C) 2017 Socionext Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/nvmem-provider.h>
+#include <linux/platform_device.h>
+
+struct uniphier_efuse_priv {
+	void __iomem *base;
+};
+
+static int uniphier_reg_read(void *context,
+			     unsigned int reg, void *_val, size_t bytes)
+{
+	struct uniphier_efuse_priv *priv = context;
+	u32 *val = _val;
+	int offs;
+
+	for (offs = 0; offs < bytes; offs += sizeof(u32))
+		*val++ = readl(priv->base + reg + offs);
+
+	return 0;
+}
+
+static int uniphier_efuse_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	struct nvmem_device *nvmem;
+	struct nvmem_config econfig = {};
+	struct uniphier_efuse_priv *priv;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	priv->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(priv->base))
+		return PTR_ERR(priv->base);
+
+	econfig.stride = 4;
+	econfig.word_size = 4;
+	econfig.read_only = true;
+	econfig.reg_read = uniphier_reg_read;
+	econfig.size = resource_size(res);
+	econfig.priv = priv;
+	econfig.dev = dev;
+	nvmem = nvmem_register(&econfig);
+	if (IS_ERR(nvmem))
+		return PTR_ERR(nvmem);
+
+	platform_set_drvdata(pdev, nvmem);
+
+	return 0;
+}
+
+static int uniphier_efuse_remove(struct platform_device *pdev)
+{
+	struct nvmem_device *nvmem = platform_get_drvdata(pdev);
+
+	return nvmem_unregister(nvmem);
+}
+
+static const struct of_device_id uniphier_efuse_of_match[] = {
+	{ .compatible = "socionext,uniphier-efuse",},
+	{/* sentinel */},
+};
+MODULE_DEVICE_TABLE(of, uniphier_efuse_of_match);
+
+static struct platform_driver uniphier_efuse_driver = {
+	.probe = uniphier_efuse_probe,
+	.remove = uniphier_efuse_remove,
+	.driver = {
+		.name = "uniphier-efuse",
+		.of_match_table = uniphier_efuse_of_match,
+	},
+};
+module_platform_driver(uniphier_efuse_driver);
+
+MODULE_AUTHOR("Keiji Hayashibara <hayashibara.keiji@socionext.com>");
+MODULE_DESCRIPTION("UniPhier eFuse driver");
+MODULE_LICENSE("GPL v2");
--- a/drivers/nvmem/vf610-ocotp.c
+++ b/drivers/nvmem/vf610-ocotp.c
@ -206,7 +206,6 @@ static int vf610_ocotp_read(void *context, unsigned int offset,

 static struct nvmem_config ocotp_config = {
 	.name = "ocotp",
-	.owner = THIS_MODULE,
 	.stride = 4,
 	.word_size = 4,
 	.reg_read = vf610_ocotp_read,
--- a/drivers/parport/parport_ip32.c
+++ b/drivers/parport/parport_ip32.c
@ -1769,7 +1769,7 @@ stop:

 /*--- Default parport operations ---------------------------------------*/

-static __initdata struct parport_operations parport_ip32_ops = {
+static const struct parport_operations parport_ip32_ops __initconst = {
 	.write_data		= parport_ip32_write_data,
 	.read_data		= parport_ip32_read_data,

--- a/drivers/pcmcia/cistpl.c
+++ b/drivers/pcmcia/cistpl.c
@ -1599,7 +1599,7 @@ static ssize_t pccard_store_cis(struct file *filp, struct kobject *kobj,
 }


-struct bin_attribute pccard_cis_attr = {
+const struct bin_attribute pccard_cis_attr = {
 	.attr = { .name = "cis", .mode = S_IRUGO | S_IWUSR },
 	.size = 0x200,
 	.read = pccard_show_cis,
--- a/drivers/pcmcia/cs_internal.h
+++ b/drivers/pcmcia/cs_internal.h
@ -152,7 +152,7 @@ void pcmcia_cleanup_irq(struct pcmcia_socket *s);
 int pcmcia_setup_irq(struct pcmcia_device *p_dev);

 /* cistpl.c */
-extern struct bin_attribute pccard_cis_attr;
+extern const struct bin_attribute pccard_cis_attr;

 int pcmcia_read_cis_mem(struct pcmcia_socket *s, int attr,
 			u_int addr, u_int len, void *ptr);
--- a/drivers/pcmcia/m32r_cfc.c
+++ b/drivers/pcmcia/m32r_cfc.c
@ -380,11 +380,10 @@ static irqreturn_t pcc_interrupt(int irq, void *dev)
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */

-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
 {
 	pr_debug("m32r_cfc: pcc_interrupt_wrapper:\n");
 	pcc_interrupt(0, NULL);
-	init_timer(&poll_timer);
 	poll_timer.expires = jiffies + poll_interval;
 	add_timer(&poll_timer);
 }
@ -758,9 +757,7 @@ static int __init init_m32r_pcc(void)

 	/* Finally, schedule a polling interrupt */
 	if (poll_interval != 0) {
-		poll_timer.function = pcc_interrupt_wrapper;
-		poll_timer.data = 0;
-		init_timer(&poll_timer);
+		timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
 		poll_timer.expires = jiffies + poll_interval;
 		add_timer(&poll_timer);
 	}
--- a/drivers/pcmcia/m32r_pcc.c
+++ b/drivers/pcmcia/m32r_pcc.c
@ -386,10 +386,9 @@ static irqreturn_t pcc_interrupt(int irq, void *dev)
 	return IRQ_RETVAL(handled);
 } /* pcc_interrupt */

-static void pcc_interrupt_wrapper(u_long data)
+static void pcc_interrupt_wrapper(struct timer_list *unused)
 {
 	pcc_interrupt(0, NULL);
-	init_timer(&poll_timer);
 	poll_timer.expires = jiffies + poll_interval;
 	add_timer(&poll_timer);
 }
@ -729,9 +728,7 @@ static int __init init_m32r_pcc(void)

 	/* Finally, schedule a polling interrupt */
 	if (poll_interval != 0) {
-		poll_timer.function = pcc_interrupt_wrapper;
-		poll_timer.data = 0;
-		init_timer(&poll_timer);
+		timer_setup(&poll_timer, pcc_interrupt_wrapper, 0);
 		poll_timer.expires = jiffies + poll_interval;
 		add_timer(&poll_timer);
 	}
--- a/drivers/thunderbolt/tb.c
+++ b/drivers/thunderbolt/tb.c
@ -225,6 +225,7 @@ static void tb_activate_pcie_devices(struct tb *tb)
 			tb_port_info(up_port,
 				     "PCIe tunnel activation failed, aborting\n");
 			tb_pci_free(tunnel);
+			continue;
 		}

 		list_add(&tunnel->list, &tcm->tunnel_list);
--- a/drivers/vme/bridges/vme_ca91cx42.c
+++ b/drivers/vme/bridges/vme_ca91cx42.c
@ -511,7 +511,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 	ca91cx42_bridge = image->parent;

 	/* Find pci_dev container of dev */
-	if (ca91cx42_bridge->parent == NULL) {
+	if (!ca91cx42_bridge->parent) {
 		dev_err(ca91cx42_bridge->parent, "Dev entry NULL\n");
 		return -EINVAL;
 	}
@ -529,14 +529,12 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,
 		image->kern_base = NULL;
 		kfree(image->bus_resource.name);
 		release_resource(&image->bus_resource);
-		memset(&image->bus_resource, 0, sizeof(struct resource));
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 	}

-	if (image->bus_resource.name == NULL) {
+	if (!image->bus_resource.name) {
 		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
-		if (image->bus_resource.name == NULL) {
-			dev_err(ca91cx42_bridge->parent, "Unable to allocate "
-				"memory for resource name\n");
+		if (!image->bus_resource.name) {
 			retval = -ENOMEM;
 			goto err_name;
 		}
@ -562,7 +560,7 @@ static int ca91cx42_alloc_resource(struct vme_master_resource *image,

 	image->kern_base = ioremap_nocache(
 		image->bus_resource.start, size);
-	if (image->kern_base == NULL) {
+	if (!image->kern_base) {
 		dev_err(ca91cx42_bridge->parent, "Failed to remap resource\n");
 		retval = -ENOMEM;
 		goto err_remap;
@ -574,7 +572,7 @@ err_remap:
 	release_resource(&image->bus_resource);
 err_resource:
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 err_name:
 	return retval;
 }
@ -588,7 +586,7 @@ static void ca91cx42_free_resource(struct vme_master_resource *image)
 	image->kern_base = NULL;
 	release_resource(&image->bus_resource);
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 }


@ -1036,10 +1034,8 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 	dev = list->parent->parent->parent;

 	/* XXX descriptor must be aligned on 64-bit boundaries */
-	entry = kmalloc(sizeof(struct ca91cx42_dma_entry), GFP_KERNEL);
-	if (entry == NULL) {
-		dev_err(dev, "Failed to allocate memory for dma resource "
-			"structure\n");
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
 		retval = -ENOMEM;
 		goto err_mem;
 	}
@ -1052,7 +1048,7 @@ static int ca91cx42_dma_list_add(struct vme_dma_list *list,
 		goto err_align;
 	}

-	memset(&entry->descriptor, 0, sizeof(struct ca91cx42_dma_descriptor));
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));

 	if (dest->type == VME_DMA_VME) {
 		entry->descriptor.dctl |= CA91CX42_DCTL_L2V;
@ -1323,7 +1319,7 @@ static int ca91cx42_lm_set(struct vme_lm_resource *lm,

 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			dev_err(dev, "Location monitor callback attached, "
 				"can't reset\n");
@ -1432,7 +1428,7 @@ static int ca91cx42_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}

 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		dev_err(dev, "Existing callback attached\n");
 		return -EBUSY;
@ -1567,7 +1563,7 @@ static int ca91cx42_crcsr_init(struct vme_bridge *ca91cx42_bridge,
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
 						     &bridge->crcsr_bus);
-	if (bridge->crcsr_kernel == NULL) {
+	if (!bridge->crcsr_kernel) {
 		dev_err(&pdev->dev, "Failed to allocate memory for CR/CSR "
 			"image\n");
 		return -ENOMEM;
@ -1618,21 +1614,15 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* We want to support more than one of each bridge so we need to
 	 * dynamically allocate the bridge structure
 	 */
-	ca91cx42_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-
-	if (ca91cx42_bridge == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	ca91cx42_bridge = kzalloc(sizeof(*ca91cx42_bridge), GFP_KERNEL);
+	if (!ca91cx42_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}
 	vme_init_bridge(ca91cx42_bridge);

-	ca91cx42_device = kzalloc(sizeof(struct ca91cx42_driver), GFP_KERNEL);
-
-	if (ca91cx42_device == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	ca91cx42_device = kzalloc(sizeof(*ca91cx42_device), GFP_KERNEL);
+	if (!ca91cx42_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@ -1688,11 +1678,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)

 	/* Add master windows to list */
 	for (i = 0; i < CA91C142_MAX_MASTER; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-			GFP_KERNEL);
-		if (master_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"master resource structure\n");
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@ -1706,7 +1693,7 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			VME_SUPER | VME_USER | VME_PROG | VME_DATA;
 		master_image->width_attr = VME_D8 | VME_D16 | VME_D32 | VME_D64;
 		memset(&master_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(master_image->bus_resource));
 		master_image->kern_base  = NULL;
 		list_add_tail(&master_image->list,
 			&ca91cx42_bridge->master_resources);
@ -1714,11 +1701,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)

 	/* Add slave windows to list */
 	for (i = 0; i < CA91C142_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-			GFP_KERNEL);
-		if (slave_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"slave resource structure\n");
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@ -1741,11 +1725,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)

 	/* Add dma engines to list */
 	for (i = 0; i < CA91C142_MAX_DMA; i++) {
-		dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
-			GFP_KERNEL);
-		if (dma_ctrlr == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"dma resource structure\n");
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
 			retval = -ENOMEM;
 			goto err_dma;
 		}
@ -1762,10 +1743,8 @@ static int ca91cx42_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}

 	/* Add location monitor to list */
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for "
-		"location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}
--- a/drivers/vme/bridges/vme_fake.c
+++ b/drivers/vme/bridges/vme_fake.c
@ -409,7 +409,7 @@ static void fake_lm_check(struct fake_driver *bridge, unsigned long long addr,
 				/* Each location monitor covers 8 bytes */
 				if (((lm_base + (8 * i)) <= addr) &&
 				    ((lm_base + (8 * i) + 8) > addr)) {
-					if (bridge->lm_callback[i] != NULL)
+					if (bridge->lm_callback[i])
 						bridge->lm_callback[i](
 							bridge->lm_data[i]);
 				}
@ -866,7 +866,7 @@ static int fake_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,

 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			pr_err("Location monitor callback attached, can't reset\n");
 			return -EBUSY;
@ -940,7 +940,7 @@ static int fake_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}

 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		pr_err("Existing callback attached\n");
 		return -EBUSY;
@ -978,7 +978,7 @@ static int fake_lm_detach(struct vme_lm_resource *lm, int monitor)
 	/* If all location monitors disabled, disable global Location Monitor */
 	tmp = 0;
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL)
+		if (bridge->lm_callback[i])
 			tmp = 1;
 	}

@ -1003,7 +1003,7 @@ static void *fake_alloc_consistent(struct device *parent, size_t size,
 {
 	void *alloc = kmalloc(size, GFP_KERNEL);

-	if (alloc != NULL)
+	if (alloc)
 		*dma = fake_ptr_to_pci(alloc);

 	return alloc;
@ -1039,7 +1039,7 @@ static int fake_crcsr_init(struct vme_bridge *fake_bridge)
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = kzalloc(VME_CRCSR_BUF_SIZE, GFP_KERNEL);
 	bridge->crcsr_bus = fake_ptr_to_pci(bridge->crcsr_kernel);
-	if (bridge->crcsr_kernel == NULL)
+	if (!bridge->crcsr_kernel)
 		return -ENOMEM;

 	vstat = fake_slot_get(fake_bridge);
@ -1075,14 +1075,14 @@ static int __init fake_init(void)
 	/* If we want to support more than one bridge at some point, we need to
 	 * dynamically allocate this so we get one per device.
 	 */
-	fake_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-	if (fake_bridge == NULL) {
+	fake_bridge = kzalloc(sizeof(*fake_bridge), GFP_KERNEL);
+	if (!fake_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}

-	fake_device = kzalloc(sizeof(struct fake_driver), GFP_KERNEL);
-	if (fake_device == NULL) {
+	fake_device = kzalloc(sizeof(*fake_device), GFP_KERNEL);
+	if (!fake_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@ -1104,9 +1104,8 @@ static int __init fake_init(void)
 	/* Add master windows to list */
 	INIT_LIST_HEAD(&fake_bridge->master_resources);
 	for (i = 0; i < FAKE_MAX_MASTER; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-				GFP_KERNEL);
-		if (master_image == NULL) {
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@ -1131,9 +1130,8 @@ static int __init fake_init(void)
 	/* Add slave windows to list */
 	INIT_LIST_HEAD(&fake_bridge->slave_resources);
 	for (i = 0; i < FAKE_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-				GFP_KERNEL);
-		if (slave_image == NULL) {
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@ -1154,9 +1152,8 @@ static int __init fake_init(void)

 	/* Add location monitor to list */
 	INIT_LIST_HEAD(&fake_bridge->lm_resources);
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		pr_err("Failed to allocate memory for location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}
--- a/drivers/vme/bridges/vme_tsi148.c
+++ b/drivers/vme/bridges/vme_tsi148.c
@ -741,18 +741,16 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,
 		image->kern_base = NULL;
 		kfree(image->bus_resource.name);
 		release_resource(&image->bus_resource);
-		memset(&image->bus_resource, 0, sizeof(struct resource));
+		memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 	}

 	/* Exit here if size is zero */
 	if (size == 0)
 		return 0;

-	if (image->bus_resource.name == NULL) {
+	if (!image->bus_resource.name) {
 		image->bus_resource.name = kmalloc(VMENAMSIZ+3, GFP_ATOMIC);
-		if (image->bus_resource.name == NULL) {
-			dev_err(tsi148_bridge->parent, "Unable to allocate "
-				"memory for resource name\n");
+		if (!image->bus_resource.name) {
 			retval = -ENOMEM;
 			goto err_name;
 		}
@ -778,7 +776,7 @@ static int tsi148_alloc_resource(struct vme_master_resource *image,

 	image->kern_base = ioremap_nocache(
 		image->bus_resource.start, size);
-	if (image->kern_base == NULL) {
+	if (!image->kern_base) {
 		dev_err(tsi148_bridge->parent, "Failed to remap resource\n");
 		retval = -ENOMEM;
 		goto err_remap;
@ -790,7 +788,7 @@ err_remap:
 	release_resource(&image->bus_resource);
 err_resource:
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 err_name:
 	return retval;
 }
@ -804,7 +802,7 @@ static void tsi148_free_resource(struct vme_master_resource *image)
 	image->kern_base = NULL;
 	release_resource(&image->bus_resource);
 	kfree(image->bus_resource.name);
-	memset(&image->bus_resource, 0, sizeof(struct resource));
+	memset(&image->bus_resource, 0, sizeof(image->bus_resource));
 }

 /*
@ -1641,10 +1639,8 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	tsi148_bridge = list->parent->parent;

 	/* Descriptor must be aligned on 64-bit boundaries */
-	entry = kmalloc(sizeof(struct tsi148_dma_entry), GFP_KERNEL);
-	if (entry == NULL) {
-		dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
-			"dma resource structure\n");
+	entry = kmalloc(sizeof(*entry), GFP_KERNEL);
+	if (!entry) {
 		retval = -ENOMEM;
 		goto err_mem;
 	}
@ -1661,7 +1657,7 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	/* Given we are going to fill out the structure, we probably don't
 	 * need to zero it, but better safe than sorry for now.
 	 */
-	memset(&entry->descriptor, 0, sizeof(struct tsi148_dma_descriptor));
+	memset(&entry->descriptor, 0, sizeof(entry->descriptor));

 	/* Fill out source part */
 	switch (src->type) {
@ -1756,8 +1752,9 @@ static int tsi148_dma_list_add(struct vme_dma_list *list,
 	list_add_tail(&entry->list, &list->entries);

 	entry->dma_handle = dma_map_single(tsi148_bridge->parent,
-		&entry->descriptor,
-		sizeof(struct tsi148_dma_descriptor), DMA_TO_DEVICE);
+					   &entry->descriptor,
+					   sizeof(entry->descriptor),
+					   DMA_TO_DEVICE);
 	if (dma_mapping_error(tsi148_bridge->parent, entry->dma_handle)) {
 		dev_err(tsi148_bridge->parent, "DMA mapping error\n");
 		retval = -EINVAL;
@ -1946,7 +1943,7 @@ static int tsi148_lm_set(struct vme_lm_resource *lm, unsigned long long lm_base,

 	/* If we already have a callback attached, we can't move it! */
 	for (i = 0; i < lm->monitors; i++) {
-		if (bridge->lm_callback[i] != NULL) {
+		if (bridge->lm_callback[i]) {
 			mutex_unlock(&lm->mtx);
 			dev_err(tsi148_bridge->parent, "Location monitor "
 				"callback attached, can't reset\n");
@ -2071,7 +2068,7 @@ static int tsi148_lm_attach(struct vme_lm_resource *lm, int monitor,
 	}

 	/* Check that a callback isn't already attached */
-	if (bridge->lm_callback[monitor] != NULL) {
+	if (bridge->lm_callback[monitor]) {
 		mutex_unlock(&lm->mtx);
 		dev_err(tsi148_bridge->parent, "Existing callback attached\n");
 		return -EBUSY;
@ -2208,7 +2205,7 @@ static int tsi148_crcsr_init(struct vme_bridge *tsi148_bridge,
 	/* Allocate mem for CR/CSR image */
 	bridge->crcsr_kernel = pci_zalloc_consistent(pdev, VME_CRCSR_BUF_SIZE,
 						     &bridge->crcsr_bus);
-	if (bridge->crcsr_kernel == NULL) {
+	if (!bridge->crcsr_kernel) {
 		dev_err(tsi148_bridge->parent, "Failed to allocate memory for "
 			"CR/CSR image\n");
 		return -ENOMEM;
@ -2294,19 +2291,15 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	/* If we want to support more than one of each bridge, we need to
 	 * dynamically generate this so we get one per device
 	 */
-	tsi148_bridge = kzalloc(sizeof(struct vme_bridge), GFP_KERNEL);
-	if (tsi148_bridge == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	tsi148_bridge = kzalloc(sizeof(*tsi148_bridge), GFP_KERNEL);
+	if (!tsi148_bridge) {
 		retval = -ENOMEM;
 		goto err_struct;
 	}
 	vme_init_bridge(tsi148_bridge);

-	tsi148_device = kzalloc(sizeof(struct tsi148_driver), GFP_KERNEL);
-	if (tsi148_device == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for device "
-			"structure\n");
+	tsi148_device = kzalloc(sizeof(*tsi148_device), GFP_KERNEL);
+	if (!tsi148_device) {
 		retval = -ENOMEM;
 		goto err_driver;
 	}
@ -2371,10 +2364,9 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		master_num--;

 		tsi148_device->flush_image =
-			kmalloc(sizeof(struct vme_master_resource), GFP_KERNEL);
-		if (tsi148_device->flush_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"flush resource structure\n");
+			kmalloc(sizeof(*tsi148_device->flush_image),
+				GFP_KERNEL);
+		if (!tsi148_device->flush_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@ -2383,17 +2375,14 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		tsi148_device->flush_image->locked = 1;
 		tsi148_device->flush_image->number = master_num;
 		memset(&tsi148_device->flush_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(tsi148_device->flush_image->bus_resource));
 		tsi148_device->flush_image->kern_base  = NULL;
 	}

 	/* Add master windows to list */
 	for (i = 0; i < master_num; i++) {
-		master_image = kmalloc(sizeof(struct vme_master_resource),
-			GFP_KERNEL);
-		if (master_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"master resource structure\n");
+		master_image = kmalloc(sizeof(*master_image), GFP_KERNEL);
+		if (!master_image) {
 			retval = -ENOMEM;
 			goto err_master;
 		}
@ -2410,7 +2399,7 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 			VME_PROG | VME_DATA;
 		master_image->width_attr = VME_D16 | VME_D32;
 		memset(&master_image->bus_resource, 0,
-			sizeof(struct resource));
+		       sizeof(master_image->bus_resource));
 		master_image->kern_base  = NULL;
 		list_add_tail(&master_image->list,
 			&tsi148_bridge->master_resources);
@ -2418,11 +2407,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)

 	/* Add slave windows to list */
 	for (i = 0; i < TSI148_MAX_SLAVE; i++) {
-		slave_image = kmalloc(sizeof(struct vme_slave_resource),
-			GFP_KERNEL);
-		if (slave_image == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"slave resource structure\n");
+		slave_image = kmalloc(sizeof(*slave_image), GFP_KERNEL);
+		if (!slave_image) {
 			retval = -ENOMEM;
 			goto err_slave;
 		}
@ -2442,11 +2428,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)

 	/* Add dma engines to list */
 	for (i = 0; i < TSI148_MAX_DMA; i++) {
-		dma_ctrlr = kmalloc(sizeof(struct vme_dma_resource),
-			GFP_KERNEL);
-		if (dma_ctrlr == NULL) {
-			dev_err(&pdev->dev, "Failed to allocate memory for "
-			"dma resource structure\n");
+		dma_ctrlr = kmalloc(sizeof(*dma_ctrlr), GFP_KERNEL);
+		if (!dma_ctrlr) {
 			retval = -ENOMEM;
 			goto err_dma;
 		}
@ -2465,10 +2448,8 @@ static int tsi148_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 	}

 	/* Add location monitor to list */
-	lm = kmalloc(sizeof(struct vme_lm_resource), GFP_KERNEL);
-	if (lm == NULL) {
-		dev_err(&pdev->dev, "Failed to allocate memory for "
-		"location monitor resource structure\n");
+	lm = kmalloc(sizeof(*lm), GFP_KERNEL);
+	if (!lm) {
 		retval = -ENOMEM;
 		goto err_lm;
 	}
--- a/drivers/vme/vme.c
+++ b/drivers/vme/vme.c
@ -92,23 +92,23 @@ void *vme_alloc_consistent(struct vme_resource *resource, size_t size,
 {
 	struct vme_bridge *bridge;

-	if (resource == NULL) {
+	if (!resource) {
 		printk(KERN_ERR "No resource\n");
 		return NULL;
 	}

 	bridge = find_bridge(resource);
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find bridge\n");
 		return NULL;
 	}

-	if (bridge->parent == NULL) {
+	if (!bridge->parent) {
 		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return NULL;
 	}

-	if (bridge->alloc_consistent == NULL) {
+	if (!bridge->alloc_consistent) {
 		printk(KERN_ERR "alloc_consistent not supported by bridge %s\n",
 		       bridge->name);
 		return NULL;
@ -132,23 +132,23 @@ void vme_free_consistent(struct vme_resource *resource, size_t size,
 {
 	struct vme_bridge *bridge;

-	if (resource == NULL) {
+	if (!resource) {
 		printk(KERN_ERR "No resource\n");
 		return;
 	}

 	bridge = find_bridge(resource);
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find bridge\n");
 		return;
 	}

-	if (bridge->parent == NULL) {
+	if (!bridge->parent) {
 		printk(KERN_ERR "Dev entry NULL for bridge %s\n", bridge->name);
 		return;
 	}

-	if (bridge->free_consistent == NULL) {
+	if (!bridge->free_consistent) {
 		printk(KERN_ERR "free_consistent not supported by bridge %s\n",
 		       bridge->name);
 		return;
@ -208,29 +208,27 @@ int vme_check_window(u32 aspace, unsigned long long vme_base,
 {
 	int retval = 0;

+	if (vme_base + size < size)
+		return -EINVAL;
+
 	switch (aspace) {
 	case VME_A16:
-		if (((vme_base + size) > VME_A16_MAX) ||
-				(vme_base > VME_A16_MAX))
+		if (vme_base + size > VME_A16_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A24:
-		if (((vme_base + size) > VME_A24_MAX) ||
-				(vme_base > VME_A24_MAX))
+		if (vme_base + size > VME_A24_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A32:
-		if (((vme_base + size) > VME_A32_MAX) ||
-				(vme_base > VME_A32_MAX))
+		if (vme_base + size > VME_A32_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_A64:
-		if ((size != 0) && (vme_base > U64_MAX + 1 - size))
-			retval = -EFAULT;
+		/* The VME_A64_MAX limit is actually U64_MAX + 1 */
 		break;
 	case VME_CRCSR:
-		if (((vme_base + size) > VME_CRCSR_MAX) ||
-				(vme_base > VME_CRCSR_MAX))
+		if (vme_base + size > VME_CRCSR_MAX)
 			retval = -EFAULT;
 		break;
 	case VME_USER1:
@ -303,7 +301,7 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 	struct vme_resource *resource = NULL;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@ -313,7 +311,7 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 		slave_image = list_entry(slave_pos,
 			struct vme_slave_resource, list);

-		if (slave_image == NULL) {
+		if (!slave_image) {
 			printk(KERN_ERR "Registered NULL Slave resource\n");
 			continue;
 		}
@ -333,14 +331,13 @@ struct vme_resource *vme_slave_request(struct vme_dev *vdev, u32 address,
 	}

 	/* No free image */
-	if (allocated_image == NULL)
+	if (!allocated_image)
 		goto err_image;

-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_WARNING "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_SLAVE;
 	resource->entry = &allocated_image->list;

@ -389,7 +386,7 @@ int vme_slave_set(struct vme_resource *resource, int enabled,

 	image = list_entry(resource->entry, struct vme_slave_resource, list);

-	if (bridge->slave_set == NULL) {
+	if (!bridge->slave_set) {
 		printk(KERN_ERR "Function not supported\n");
 		return -ENOSYS;
 	}
@ -438,7 +435,7 @@ int vme_slave_get(struct vme_resource *resource, int *enabled,

 	image = list_entry(resource->entry, struct vme_slave_resource, list);

-	if (bridge->slave_get == NULL) {
+	if (!bridge->slave_get) {
 		printk(KERN_ERR "vme_slave_get not supported\n");
 		return -EINVAL;
 	}
@ -465,7 +462,7 @@ void vme_slave_free(struct vme_resource *resource)

 	slave_image = list_entry(resource->entry, struct vme_slave_resource,
 		list);
-	if (slave_image == NULL) {
+	if (!slave_image) {
 		printk(KERN_ERR "Can't find slave resource\n");
 		return;
 	}
@ -505,7 +502,7 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 	struct vme_resource *resource = NULL;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@ -515,7 +512,7 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 		master_image = list_entry(master_pos,
 			struct vme_master_resource, list);

-		if (master_image == NULL) {
+		if (!master_image) {
 			printk(KERN_WARNING "Registered NULL master resource\n");
 			continue;
 		}
@ -536,16 +533,15 @@ struct vme_resource *vme_master_request(struct vme_dev *vdev, u32 address,
 	}

 	/* Check to see if we found a resource */
-	if (allocated_image == NULL) {
+	if (!allocated_image) {
 		printk(KERN_ERR "Can't find a suitable resource\n");
 		goto err_image;
 	}

-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_ERR "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_MASTER;
 	resource->entry = &allocated_image->list;

@ -594,7 +590,7 @@ int vme_master_set(struct vme_resource *resource, int enabled,

 	image = list_entry(resource->entry, struct vme_master_resource, list);

-	if (bridge->master_set == NULL) {
+	if (!bridge->master_set) {
 		printk(KERN_WARNING "vme_master_set not supported\n");
 		return -EINVAL;
 	}
@ -644,7 +640,7 @@ int vme_master_get(struct vme_resource *resource, int *enabled,

 	image = list_entry(resource->entry, struct vme_master_resource, list);

-	if (bridge->master_get == NULL) {
+	if (!bridge->master_get) {
 		printk(KERN_WARNING "%s not supported\n", __func__);
 		return -EINVAL;
 	}
@ -676,7 +672,7 @@ ssize_t vme_master_read(struct vme_resource *resource, void *buf, size_t count,
 	struct vme_master_resource *image;
 	size_t length;

-	if (bridge->master_read == NULL) {
+	if (!bridge->master_read) {
 		printk(KERN_WARNING "Reading from resource not supported\n");
 		return -EINVAL;
 	}
@ -725,7 +721,7 @@ ssize_t vme_master_write(struct vme_resource *resource, void *buf,
 	struct vme_master_resource *image;
 	size_t length;

-	if (bridge->master_write == NULL) {
+	if (!bridge->master_write) {
 		printk(KERN_WARNING "Writing to resource not supported\n");
 		return -EINVAL;
 	}
@ -776,7 +772,7 @@ unsigned int vme_master_rmw(struct vme_resource *resource, unsigned int mask,
 	struct vme_bridge *bridge = find_bridge(resource);
 	struct vme_master_resource *image;

-	if (bridge->master_rmw == NULL) {
+	if (!bridge->master_rmw) {
 		printk(KERN_WARNING "Writing to resource not supported\n");
 		return -EINVAL;
 	}
@ -846,7 +842,7 @@ void vme_master_free(struct vme_resource *resource)

 	master_image = list_entry(resource->entry, struct vme_master_resource,
 		list);
-	if (master_image == NULL) {
+	if (!master_image) {
 		printk(KERN_ERR "Can't find master resource\n");
 		return;
 	}
@ -886,7 +882,7 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	printk(KERN_ERR "No VME resource Attribute tests done\n");

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@ -895,8 +891,7 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	list_for_each(dma_pos, &bridge->dma_resources) {
 		dma_ctrlr = list_entry(dma_pos,
 			struct vme_dma_resource, list);
-
-		if (dma_ctrlr == NULL) {
+		if (!dma_ctrlr) {
 			printk(KERN_ERR "Registered NULL DMA resource\n");
 			continue;
 		}
@ -915,14 +910,13 @@ struct vme_resource *vme_dma_request(struct vme_dev *vdev, u32 route)
 	}

 	/* Check to see if we found a resource */
-	if (allocated_ctrlr == NULL)
+	if (!allocated_ctrlr)
 		goto err_ctrlr;

-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_WARNING "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_DMA;
 	resource->entry = &allocated_ctrlr->list;

@ -951,7 +945,6 @@ EXPORT_SYMBOL(vme_dma_request);
 */
 struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
 {
-	struct vme_dma_resource *ctrlr;
 	struct vme_dma_list *dma_list;

 	if (resource->type != VME_DMA) {
@ -959,15 +952,14 @@ struct vme_dma_list *vme_new_dma_list(struct vme_resource *resource)
 		return NULL;
 	}

-	ctrlr = list_entry(resource->entry, struct vme_dma_resource, list);
-
-	dma_list = kmalloc(sizeof(struct vme_dma_list), GFP_KERNEL);
-	if (dma_list == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for new DMA list\n");
+	dma_list = kmalloc(sizeof(*dma_list), GFP_KERNEL);
+	if (!dma_list)
 		return NULL;
-	}
+
 	INIT_LIST_HEAD(&dma_list->entries);
-	dma_list->parent = ctrlr;
+	dma_list->parent = list_entry(resource->entry,
+				      struct vme_dma_resource,
+				      list);
 	mutex_init(&dma_list->mtx);

 	return dma_list;
@ -990,17 +982,13 @@ struct vme_dma_attr *vme_dma_pattern_attribute(u32 pattern, u32 type)
 	struct vme_dma_attr *attributes;
 	struct vme_dma_pattern *pattern_attr;

-	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}

-	pattern_attr = kmalloc(sizeof(struct vme_dma_pattern), GFP_KERNEL);
-	if (pattern_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for pattern attributes\n");
+	pattern_attr = kmalloc(sizeof(*pattern_attr), GFP_KERNEL);
+	if (!pattern_attr)
 		goto err_pat;
-	}

 	attributes->type = VME_DMA_PATTERN;
 	attributes->private = (void *)pattern_attr;
@ -1034,19 +1022,13 @@ struct vme_dma_attr *vme_dma_pci_attribute(dma_addr_t address)

 	/* XXX Run some sanity checks here */

-	attributes = kmalloc(sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}

-	pci_attr = kmalloc(sizeof(struct vme_dma_pci), GFP_KERNEL);
-	if (pci_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for PCI attributes\n");
+	pci_attr = kmalloc(sizeof(*pci_attr), GFP_KERNEL);
+	if (!pci_attr)
 		goto err_pci;
-	}
-
-

 	attributes->type = VME_DMA_PCI;
 	attributes->private = (void *)pci_attr;
@ -1081,18 +1063,13 @@ struct vme_dma_attr *vme_dma_vme_attribute(unsigned long long address,
 	struct vme_dma_attr *attributes;
 	struct vme_dma_vme *vme_attr;

-	attributes = kmalloc(
-		sizeof(struct vme_dma_attr), GFP_KERNEL);
-	if (attributes == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for attributes structure\n");
+	attributes = kmalloc(sizeof(*attributes), GFP_KERNEL);
+	if (!attributes)
 		goto err_attr;
-	}

-	vme_attr = kmalloc(sizeof(struct vme_dma_vme), GFP_KERNEL);
-	if (vme_attr == NULL) {
-		printk(KERN_ERR "Unable to allocate memory for VME attributes\n");
+	vme_attr = kmalloc(sizeof(*vme_attr), GFP_KERNEL);
+	if (!vme_attr)
 		goto err_vme;
-	}

 	attributes->type = VME_DMA_VME;
 	attributes->private = (void *)vme_attr;
@ -1148,7 +1125,7 @@ int vme_dma_list_add(struct vme_dma_list *list, struct vme_dma_attr *src,
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;

-	if (bridge->dma_list_add == NULL) {
+	if (!bridge->dma_list_add) {
 		printk(KERN_WARNING "Link List DMA generation not supported\n");
 		return -EINVAL;
 	}
@ -1181,7 +1158,7 @@ int vme_dma_list_exec(struct vme_dma_list *list)
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;

-	if (bridge->dma_list_exec == NULL) {
+	if (!bridge->dma_list_exec) {
 		printk(KERN_ERR "Link List DMA execution not supported\n");
 		return -EINVAL;
 	}
@ -1210,14 +1187,14 @@ int vme_dma_list_free(struct vme_dma_list *list)
 	struct vme_bridge *bridge = list->parent->parent;
 	int retval;

-	if (bridge->dma_list_empty == NULL) {
+	if (!bridge->dma_list_empty) {
 		printk(KERN_WARNING "Emptying of Link Lists not supported\n");
 		return -EINVAL;
 	}

 	if (!mutex_trylock(&list->mtx)) {
 		printk(KERN_ERR "Link List in use\n");
-		return -EINVAL;
+		return -EBUSY;
 	}

 	/*
@ -1342,8 +1319,7 @@ void vme_irq_handler(struct vme_bridge *bridge, int level, int statid)

 	call = bridge->irq[level - 1].callback[statid].func;
 	priv_data = bridge->irq[level - 1].callback[statid].priv_data;
-
-	if (call != NULL)
+	if (call)
 		call(level, statid, priv_data);
 	else
 		printk(KERN_WARNING "Spurious VME interrupt, level:%x, vector:%x\n",
@ -1374,7 +1350,7 @@ int vme_irq_request(struct vme_dev *vdev, int level, int statid,
 	struct vme_bridge *bridge;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}
@ -1384,7 +1360,7 @@ int vme_irq_request(struct vme_dev *vdev, int level, int statid,
 		return -EINVAL;
 	}

-	if (bridge->irq_set == NULL) {
+	if (!bridge->irq_set) {
 		printk(KERN_ERR "Configuring interrupts not supported\n");
 		return -EINVAL;
 	}
@ -1423,7 +1399,7 @@ void vme_irq_free(struct vme_dev *vdev, int level, int statid)
 	struct vme_bridge *bridge;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return;
 	}
@ -1433,7 +1409,7 @@ void vme_irq_free(struct vme_dev *vdev, int level, int statid)
 		return;
 	}

-	if (bridge->irq_set == NULL) {
+	if (!bridge->irq_set) {
 		printk(KERN_ERR "Configuring interrupts not supported\n");
 		return;
 	}
@ -1470,7 +1446,7 @@ int vme_irq_generate(struct vme_dev *vdev, int level, int statid)
 	struct vme_bridge *bridge;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}
@ -1480,7 +1456,7 @@ int vme_irq_generate(struct vme_dev *vdev, int level, int statid)
 		return -EINVAL;
 	}

-	if (bridge->irq_generate == NULL) {
+	if (!bridge->irq_generate) {
 		printk(KERN_WARNING "Interrupt generation not supported\n");
 		return -EINVAL;
 	}
@ -1508,7 +1484,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	struct vme_resource *resource = NULL;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		goto err_bus;
 	}
@ -1517,8 +1493,7 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	list_for_each(lm_pos, &bridge->lm_resources) {
 		lm = list_entry(lm_pos,
 			struct vme_lm_resource, list);
-
-		if (lm == NULL) {
+		if (!lm) {
 			printk(KERN_ERR "Registered NULL Location Monitor resource\n");
 			continue;
 		}
@ -1535,14 +1510,13 @@ struct vme_resource *vme_lm_request(struct vme_dev *vdev)
 	}

 	/* Check to see if we found a resource */
-	if (allocated_lm == NULL)
+	if (!allocated_lm)
 		goto err_lm;

-	resource = kmalloc(sizeof(struct vme_resource), GFP_KERNEL);
-	if (resource == NULL) {
-		printk(KERN_ERR "Unable to allocate resource structure\n");
+	resource = kmalloc(sizeof(*resource), GFP_KERNEL);
+	if (!resource)
 		goto err_alloc;
-	}
+
 	resource->type = VME_LM;
 	resource->entry = &allocated_lm->list;

@ -1612,7 +1586,7 @@ int vme_lm_set(struct vme_resource *resource, unsigned long long lm_base,

 	lm = list_entry(resource->entry, struct vme_lm_resource, list);

-	if (bridge->lm_set == NULL) {
+	if (!bridge->lm_set) {
 		printk(KERN_ERR "vme_lm_set not supported\n");
 		return -EINVAL;
 	}
@ -1648,7 +1622,7 @@ int vme_lm_get(struct vme_resource *resource, unsigned long long *lm_base,

 	lm = list_entry(resource->entry, struct vme_lm_resource, list);

-	if (bridge->lm_get == NULL) {
+	if (!bridge->lm_get) {
 		printk(KERN_ERR "vme_lm_get not supported\n");
 		return -EINVAL;
 	}
@ -1685,7 +1659,7 @@ int vme_lm_attach(struct vme_resource *resource, int monitor,

 	lm = list_entry(resource->entry, struct vme_lm_resource, list);

-	if (bridge->lm_attach == NULL) {
+	if (!bridge->lm_attach) {
 		printk(KERN_ERR "vme_lm_attach not supported\n");
 		return -EINVAL;
 	}
@ -1718,7 +1692,7 @@ int vme_lm_detach(struct vme_resource *resource, int monitor)

 	lm = list_entry(resource->entry, struct vme_lm_resource, list);

-	if (bridge->lm_detach == NULL) {
+	if (!bridge->lm_detach) {
 		printk(KERN_ERR "vme_lm_detach not supported\n");
 		return -EINVAL;
 	}
@ -1780,12 +1754,12 @@ int vme_slot_num(struct vme_dev *vdev)
 	struct vme_bridge *bridge;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		printk(KERN_ERR "Can't find VME bus\n");
 		return -EINVAL;
 	}

-	if (bridge->slot_get == NULL) {
+	if (!bridge->slot_get) {
 		printk(KERN_WARNING "vme_slot_num not supported\n");
 		return -EINVAL;
 	}
@ -1808,7 +1782,7 @@ int vme_bus_num(struct vme_dev *vdev)
 	struct vme_bridge *bridge;

 	bridge = vdev->bridge;
-	if (bridge == NULL) {
+	if (!bridge) {
 		pr_err("Can't find VME bus\n");
 		return -EINVAL;
 	}
@ -1888,7 +1862,7 @@ static int __vme_register_driver_bus(struct vme_driver *drv,
 	struct vme_dev *tmp;

 	for (i = 0; i < ndevs; i++) {
-		vdev = kzalloc(sizeof(struct vme_dev), GFP_KERNEL);
+		vdev = kzalloc(sizeof(*vdev), GFP_KERNEL);
 		if (!vdev) {
 			err = -ENOMEM;
 			goto err_devalloc;
@ -2020,30 +1994,26 @@ static int vme_bus_match(struct device *dev, struct device_driver *drv)

 static int vme_bus_probe(struct device *dev)
 {
-	int retval = -ENODEV;
 	struct vme_driver *driver;
 	struct vme_dev *vdev = dev_to_vme_dev(dev);

 	driver = dev->platform_data;
+	if (driver->probe)
+		return driver->probe(vdev);

-	if (driver->probe != NULL)
-		retval = driver->probe(vdev);
-
-	return retval;
+	return -ENODEV;
 }

 static int vme_bus_remove(struct device *dev)
 {
-	int retval = -ENODEV;
 	struct vme_driver *driver;
 	struct vme_dev *vdev = dev_to_vme_dev(dev);

 	driver = dev->platform_data;
+	if (driver->remove)
+		return driver->remove(vdev);

-	if (driver->remove != NULL)
-		retval = driver->remove(vdev);
-
-	return retval;
+	return -ENODEV;
 }

 struct bus_type vme_bus_type = {
--- a/drivers/w1/slaves/Kconfig
+++ b/drivers/w1/slaves/Kconfig
@ -148,4 +148,19 @@ config W1_SLAVE_DS28E04

 	  If you are unsure, say N.

+config W1_SLAVE_DS28E17
+	tristate "1-wire-to-I2C master bridge (DS28E17)"
+	select CRC16
+	depends on I2C
+	help
+	  Say Y here if you want to use the DS28E17 1-wire-to-I2C master bridge.
+	  For each DS28E17 detected, a new I2C adapter is created within the
+	  kernel. I2C devices on that bus can be configured to be used by the
+	  kernel and userspace tools as on any other "native" I2C bus.
+
+	  This driver is also available as a module. If so, the module
+	  will be called w1_ds28e17.
+
+	  If you are unsure, say N.
+
 endmenu
--- a/drivers/w1/slaves/Makefile
+++ b/drivers/w1/slaves/Makefile
@ -18,3 +18,4 @@ obj-$(CONFIG_W1_SLAVE_DS2760)	+= w1_ds2760.o
 obj-$(CONFIG_W1_SLAVE_DS2780)	+= w1_ds2780.o
 obj-$(CONFIG_W1_SLAVE_DS2781)	+= w1_ds2781.o
 obj-$(CONFIG_W1_SLAVE_DS28E04)	+= w1_ds28e04.o
+obj-$(CONFIG_W1_SLAVE_DS28E17)	+= w1_ds28e17.o
--- a/drivers/w1/slaves/w1_ds28e17.c
+++ b/drivers/w1/slaves/w1_ds28e17.c
@ -0,0 +1,771 @@
+/*
+ *	w1_ds28e17.c - w1 family 19 (DS28E17) driver
+ *
+ * Copyright (c) 2016 Jan Kandziora <jjj@gmx.de>
+ *
+ * This source code is licensed under the GNU General Public License,
+ * Version 2. See the file COPYING for more details.
+ */
+
+#include <linux/crc16.h>
+#include <linux/delay.h>
+#include <linux/device.h>
+#include <linux/i2c.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/slab.h>
+#include <linux/types.h>
+#include <linux/uaccess.h>
+
+#define CRC16_INIT 0
+
+#include <linux/w1.h>
+
+#define W1_FAMILY_DS28E17 0x19
+
+/* Module setup. */
+MODULE_LICENSE("GPL v2");
+MODULE_AUTHOR("Jan Kandziora <jjj@gmx.de>");
+MODULE_DESCRIPTION("w1 family 19 driver for DS28E17, 1-wire to I2C master bridge");
+MODULE_ALIAS("w1-family-" __stringify(W1_FAMILY_DS28E17));
+
+
+/* Default I2C speed to be set when a DS28E17 is detected. */
+static int i2c_speed = 100;
+module_param_named(speed, i2c_speed, int, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(speed, "Default I2C speed to be set when a DS28E17 is detected");
+
+/* Default I2C stretch value to be set when a DS28E17 is detected. */
+static char i2c_stretch = 1;
+module_param_named(stretch, i2c_stretch, byte, (S_IRUSR | S_IWUSR));
+MODULE_PARM_DESC(stretch, "Default I2C stretch value to be set when a DS28E17 is detected");
+
+/* DS28E17 device command codes. */
+#define W1_F19_WRITE_DATA_WITH_STOP      0x4B
+#define W1_F19_WRITE_DATA_NO_STOP        0x5A
+#define W1_F19_WRITE_DATA_ONLY           0x69
+#define W1_F19_WRITE_DATA_ONLY_WITH_STOP 0x78
+#define W1_F19_READ_DATA_WITH_STOP       0x87
+#define W1_F19_WRITE_READ_DATA_WITH_STOP 0x2D
+#define W1_F19_WRITE_CONFIGURATION       0xD2
+#define W1_F19_READ_CONFIGURATION        0xE1
+#define W1_F19_ENABLE_SLEEP_MODE         0x1E
+#define W1_F19_READ_DEVICE_REVISION      0xC4
+
+/* DS28E17 status bits */
+#define W1_F19_STATUS_CRC     0x01
+#define W1_F19_STATUS_ADDRESS 0x02
+#define W1_F19_STATUS_START   0x08
+
+/*
+ * Maximum number of I2C bytes to transfer within one CRC16 protected onewire
+ * command.
+ * */
+#define W1_F19_WRITE_DATA_LIMIT 255
+
+/* Maximum number of I2C bytes to read with one onewire command. */
+#define W1_F19_READ_DATA_LIMIT 255
+
+/* Constants for calculating the busy sleep. */
+#define W1_F19_BUSY_TIMEBASES { 90, 23, 10 }
+#define W1_F19_BUSY_GRATUITY  1000
+
+/* Number of checks for the busy flag before timeout. */
+#define W1_F19_BUSY_CHECKS 1000
+
+
+/* Slave specific data. */
+struct w1_f19_data {
+	u8 speed;
+	u8 stretch;
+	struct i2c_adapter adapter;
+};
+
+
+/* Wait a while until the busy flag clears. */
+static int w1_f19_i2c_busy_wait(struct w1_slave *sl, size_t count)
+{
+	const unsigned long timebases[3] = W1_F19_BUSY_TIMEBASES;
+	struct w1_f19_data *data = sl->family_data;
+	unsigned int checks;
+
+	/* Check the busy flag first in any case.*/
+	if (w1_touch_bit(sl->master, 1) == 0)
+		return 0;
+
+	/*
+	 * Do a generously long sleep in the beginning,
+	 * as we have to wait at least this time for all
+	 * the I2C bytes at the given speed to be transferred.
+	 */
+	usleep_range(timebases[data->speed] * (data->stretch) * count,
+		timebases[data->speed] * (data->stretch) * count
+		+ W1_F19_BUSY_GRATUITY);
+
+	/* Now continusly check the busy flag sent by the DS28E17. */
+	checks = W1_F19_BUSY_CHECKS;
+	while ((checks--) > 0) {
+		/* Return success if the busy flag is cleared. */
+		if (w1_touch_bit(sl->master, 1) == 0)
+			return 0;
+
+		/* Wait one non-streched byte timeslot. */
+		udelay(timebases[data->speed]);
+	}
+
+	/* Timeout. */
+	dev_warn(&sl->dev, "busy timeout\n");
+	return -ETIMEDOUT;
+}
+
+
+/* Utility function: result. */
+static size_t w1_f19_error(struct w1_slave *sl, u8 w1_buf[])
+{
+	/* Warnings. */
+	if (w1_buf[0] & W1_F19_STATUS_CRC)
+		dev_warn(&sl->dev, "crc16 mismatch\n");
+	if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+		dev_warn(&sl->dev, "i2c device not responding\n");
+	if ((w1_buf[0] & (W1_F19_STATUS_CRC | W1_F19_STATUS_ADDRESS)) == 0
+			&& w1_buf[1] != 0) {
+		dev_warn(&sl->dev, "i2c short write, %d bytes not acknowledged\n",
+			w1_buf[1]);
+	}
+
+	/* Check error conditions. */
+	if (w1_buf[0] & W1_F19_STATUS_ADDRESS)
+		return -ENXIO;
+	if (w1_buf[0] & W1_F19_STATUS_START)
+		return -EAGAIN;
+	if (w1_buf[0] != 0 || w1_buf[1] != 0)
+		return -EIO;
+
+	/* All ok. */
+	return 0;
+}
+
+
+/* Utility function: write data to I2C slave, single chunk. */
+static int __w1_f19_i2c_write(struct w1_slave *sl,
+	const u8 *command, size_t command_count,
+	const u8 *buffer, size_t count)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[2];
+
+	/* Send command and I2C data to DS28E17. */
+	crc = crc16(CRC16_INIT, command, command_count);
+	w1_write_block(sl->master, command, command_count);
+
+	w1_buf[0] = count;
+	crc = crc16(crc, w1_buf, 1);
+	w1_write_8(sl->master, w1_buf[0]);
+
+	crc = crc16(crc, buffer, count);
+	w1_write_block(sl->master, buffer, count);
+
+	w1_buf[0] = ~(crc & 0xFF);
+	w1_buf[1] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 2);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_read_block(sl->master, w1_buf, 2);
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Return number of bytes written. */
+	return count;
+}
+
+
+/* Write data to I2C slave. */
+static int w1_f19_i2c_write(struct w1_slave *sl, u16 i2c_address,
+	const u8 *buffer, size_t count, bool stop)
+{
+	int result;
+	int remaining = count;
+	const u8 *p;
+	u8 command[2];
+
+	/* Check input. */
+	if (count == 0)
+		return -EOPNOTSUPP;
+
+	/* Check whether we need multiple commands. */
+	if (count <= W1_F19_WRITE_DATA_LIMIT) {
+		/*
+		 * Small data amount. Data can be sent with
+		 * a single onewire command.
+		 */
+
+		/* Send all data to DS28E17. */
+		command[0] = (stop ? W1_F19_WRITE_DATA_WITH_STOP
+			: W1_F19_WRITE_DATA_NO_STOP);
+		command[1] = i2c_address << 1;
+		result = __w1_f19_i2c_write(sl, command, 2, buffer, count);
+	} else {
+		/* Large data amount. Data has to be sent in multiple chunks. */
+
+		/* Send first chunk to DS28E17. */
+		p = buffer;
+		command[0] = W1_F19_WRITE_DATA_NO_STOP;
+		command[1] = i2c_address << 1;
+		result = __w1_f19_i2c_write(sl, command, 2, p,
+			W1_F19_WRITE_DATA_LIMIT);
+		if (result < 0)
+			return result;
+
+		/* Resume to same DS28E17. */
+		if (w1_reset_resume_command(sl->master))
+			return -EIO;
+
+		/* Next data chunk. */
+		p += W1_F19_WRITE_DATA_LIMIT;
+		remaining -= W1_F19_WRITE_DATA_LIMIT;
+
+		while (remaining > W1_F19_WRITE_DATA_LIMIT) {
+			/* Send intermediate chunk to DS28E17. */
+			command[0] = W1_F19_WRITE_DATA_ONLY;
+			result = __w1_f19_i2c_write(sl, command, 1, p,
+					W1_F19_WRITE_DATA_LIMIT);
+			if (result < 0)
+				return result;
+
+			/* Resume to same DS28E17. */
+			if (w1_reset_resume_command(sl->master))
+				return -EIO;
+
+			/* Next data chunk. */
+			p += W1_F19_WRITE_DATA_LIMIT;
+			remaining -= W1_F19_WRITE_DATA_LIMIT;
+		}
+
+		/* Send final chunk to DS28E17. */
+		command[0] = (stop ? W1_F19_WRITE_DATA_ONLY_WITH_STOP
+			: W1_F19_WRITE_DATA_ONLY);
+		result = __w1_f19_i2c_write(sl, command, 1, p, remaining);
+	}
+
+	return result;
+}
+
+
+/* Read data from I2C slave. */
+static int w1_f19_i2c_read(struct w1_slave *sl, u16 i2c_address,
+	u8 *buffer, size_t count)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[5];
+
+	/* Check input. */
+	if (count == 0)
+		return -EOPNOTSUPP;
+
+	/* Send command to DS28E17. */
+	w1_buf[0] = W1_F19_READ_DATA_WITH_STOP;
+	w1_buf[1] = i2c_address << 1 | 0x01;
+	w1_buf[2] = count;
+	crc = crc16(CRC16_INIT, w1_buf, 3);
+	w1_buf[3] = ~(crc & 0xFF);
+	w1_buf[4] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 5);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, count + 1) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_buf[0] = w1_read_8(sl->master);
+	w1_buf[1] = 0;
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Read received I2C data from DS28E17. */
+	return w1_read_block(sl->master, buffer, count);
+}
+
+
+/* Write to, then read data from I2C slave. */
+static int w1_f19_i2c_write_read(struct w1_slave *sl, u16 i2c_address,
+	const u8 *wbuffer, size_t wcount, u8 *rbuffer, size_t rcount)
+{
+	u16 crc;
+	int error;
+	u8 w1_buf[3];
+
+	/* Check input. */
+	if (wcount == 0 || rcount == 0)
+		return -EOPNOTSUPP;
+
+	/* Send command and I2C data to DS28E17. */
+	w1_buf[0] = W1_F19_WRITE_READ_DATA_WITH_STOP;
+	w1_buf[1] = i2c_address << 1;
+	w1_buf[2] = wcount;
+	crc = crc16(CRC16_INIT, w1_buf, 3);
+	w1_write_block(sl->master, w1_buf, 3);
+
+	crc = crc16(crc, wbuffer, wcount);
+	w1_write_block(sl->master, wbuffer, wcount);
+
+	w1_buf[0] = rcount;
+	crc = crc16(crc, w1_buf, 1);
+	w1_buf[1] = ~(crc & 0xFF);
+	w1_buf[2] = ~((crc >> 8) & 0xFF);
+	w1_write_block(sl->master, w1_buf, 3);
+
+	/* Wait until busy flag clears (or timeout). */
+	if (w1_f19_i2c_busy_wait(sl, wcount + rcount + 2) < 0)
+		return -ETIMEDOUT;
+
+	/* Read status from DS28E17. */
+	w1_read_block(sl->master, w1_buf, 2);
+
+	/* Check error conditions. */
+	error = w1_f19_error(sl, w1_buf);
+	if (error < 0)
+		return error;
+
+	/* Read received I2C data from DS28E17. */
+	return w1_read_block(sl->master, rbuffer, rcount);
+}
+
+
+/* Do an I2C master transfer. */
+static int w1_f19_i2c_master_transfer(struct i2c_adapter *adapter,
+	struct i2c_msg *msgs, int num)
+{
+	struct w1_slave *sl = (struct w1_slave *) adapter->algo_data;
+	int i = 0;
+	int result = 0;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Select DS28E17. */
+	if (w1_reset_select_slave(sl)) {
+		i = -EIO;
+		goto error;
+	}
+
+	/* Loop while there are still messages to transfer. */
+	while (i < num) {
+		/*
+		 * Check for special case: Small write followed
+		 * by read to same I2C device.
+		 */
+		if (i < (num-1)
+			&& msgs[i].addr == msgs[i+1].addr
+			&& !(msgs[i].flags & I2C_M_RD)
+			&& (msgs[i+1].flags & I2C_M_RD)
+			&& (msgs[i].len <= W1_F19_WRITE_DATA_LIMIT)) {
+			/*
+			 * The DS28E17 has a combined transfer
+			 * for small write+read.
+			 */
+			result = w1_f19_i2c_write_read(sl, msgs[i].addr,
+				msgs[i].buf, msgs[i].len,
+				msgs[i+1].buf, msgs[i+1].len);
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+
+			/*
+			 * Check if we should interpret the read data
+			 * as a length byte. The DS28E17 unfortunately
+			 * has no read without stop, so we can just do
+			 * another simple read in that case.
+			 */
+			if (msgs[i+1].flags & I2C_M_RECV_LEN) {
+				result = w1_f19_i2c_read(sl, msgs[i+1].addr,
+					&(msgs[i+1].buf[1]), msgs[i+1].buf[0]);
+				if (result < 0) {
+					i = result;
+					goto error;
+				}
+			}
+
+			/* Eat up read message, too. */
+			i++;
+		} else if (msgs[i].flags & I2C_M_RD) {
+			/* Read transfer. */
+			result = w1_f19_i2c_read(sl, msgs[i].addr,
+				msgs[i].buf, msgs[i].len);
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+
+			/*
+			 * Check if we should interpret the read data
+			 * as a length byte. The DS28E17 unfortunately
+			 * has no read without stop, so we can just do
+			 * another simple read in that case.
+			 */
+			if (msgs[i].flags & I2C_M_RECV_LEN) {
+				result = w1_f19_i2c_read(sl,
+					msgs[i].addr,
+					&(msgs[i].buf[1]),
+					msgs[i].buf[0]);
+				if (result < 0) {
+					i = result;
+					goto error;
+				}
+			}
+		} else {
+			/*
+			 * Write transfer.
+			 * Stop condition only for last
+			 * transfer.
+			 */
+			result = w1_f19_i2c_write(sl,
+				msgs[i].addr,
+				msgs[i].buf,
+				msgs[i].len,
+				i == (num-1));
+			if (result < 0) {
+				i = result;
+				goto error;
+			}
+		}
+
+		/* Next message. */
+		i++;
+
+		/* Are there still messages to send/receive? */
+		if (i < num) {
+			/* Yes. Resume to same DS28E17. */
+			if (w1_reset_resume_command(sl->master)) {
+				i = -EIO;
+				goto error;
+			}
+		}
+	}
+
+error:
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	/* Return number of messages processed or error. */
+	return i;
+}
+
+
+/* Get I2C adapter functionality. */
+static u32 w1_f19_i2c_functionality(struct i2c_adapter *adapter)
+{
+	/*
+	 * Plain I2C functions only.
+	 * SMBus is emulated by the kernel's I2C layer.
+	 * No "I2C_FUNC_SMBUS_QUICK"
+	 * No "I2C_FUNC_SMBUS_READ_BLOCK_DATA"
+	 * No "I2C_FUNC_SMBUS_BLOCK_PROC_CALL"
+	 */
+	return I2C_FUNC_I2C |
+		I2C_FUNC_SMBUS_BYTE |
+		I2C_FUNC_SMBUS_BYTE_DATA |
+		I2C_FUNC_SMBUS_WORD_DATA |
+		I2C_FUNC_SMBUS_PROC_CALL |
+		I2C_FUNC_SMBUS_WRITE_BLOCK_DATA |
+		I2C_FUNC_SMBUS_I2C_BLOCK |
+		I2C_FUNC_SMBUS_PEC;
+}
+
+
+/* I2C adapter quirks. */
+static const struct i2c_adapter_quirks w1_f19_i2c_adapter_quirks = {
+	.max_read_len = W1_F19_READ_DATA_LIMIT,
+};
+
+/* I2C algorithm. */
+static const struct i2c_algorithm w1_f19_i2c_algorithm = {
+	.master_xfer    = w1_f19_i2c_master_transfer,
+	.functionality  = w1_f19_i2c_functionality,
+};
+
+
+/* Read I2C speed from DS28E17. */
+static int w1_f19_get_i2c_speed(struct w1_slave *sl)
+{
+	struct w1_f19_data *data = sl->family_data;
+	int result = -EIO;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Select slave. */
+	if (w1_reset_select_slave(sl))
+		goto error;
+
+	/* Read slave configuration byte. */
+	w1_write_8(sl->master, W1_F19_READ_CONFIGURATION);
+	result = w1_read_8(sl->master);
+	if (result < 0 || result > 2) {
+		result = -EIO;
+		goto error;
+	}
+
+	/* Update speed in slave specific data. */
+	data->speed = result;
+
+error:
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return result;
+}
+
+
+/* Set I2C speed on DS28E17. */
+static int __w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+	struct w1_f19_data *data = sl->family_data;
+	const int i2c_speeds[3] = { 100, 400, 900 };
+	u8 w1_buf[2];
+
+	/* Select slave. */
+	if (w1_reset_select_slave(sl))
+		return -EIO;
+
+	w1_buf[0] = W1_F19_WRITE_CONFIGURATION;
+	w1_buf[1] = speed;
+	w1_write_block(sl->master, w1_buf, 2);
+
+	/* Update speed in slave specific data. */
+	data->speed = speed;
+
+	dev_info(&sl->dev, "i2c speed set to %d kBaud\n", i2c_speeds[speed]);
+
+	return 0;
+}
+
+static int w1_f19_set_i2c_speed(struct w1_slave *sl, u8 speed)
+{
+	int result;
+
+	/* Start onewire transaction. */
+	mutex_lock(&sl->master->bus_mutex);
+
+	/* Set I2C speed on DS28E17. */
+	result = __w1_f19_set_i2c_speed(sl, speed);
+
+	/* End onewire transaction. */
+	mutex_unlock(&sl->master->bus_mutex);
+
+	return result;
+}
+
+
+/* Sysfs attributes. */
+
+/* I2C speed attribute for a single chip. */
+static ssize_t speed_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	int result;
+
+	/* Read current speed from slave. Updates data->speed. */
+	result = w1_f19_get_i2c_speed(sl);
+	if (result < 0)
+		return result;
+
+	/* Return current speed value. */
+	return sprintf(buf, "%d\n", result);
+}
+
+static ssize_t speed_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	int error;
+
+	/* Valid values are: "100", "400", "900" */
+	if (count < 3 || count > 4 || !buf)
+		return -EINVAL;
+	if (count == 4 && buf[3] != '\n')
+		return -EINVAL;
+	if (buf[1] != '0' || buf[2] != '0')
+		return -EINVAL;
+
+	/* Set speed on slave. */
+	switch (buf[0]) {
+	case '1':
+		error = w1_f19_set_i2c_speed(sl, 0);
+		break;
+	case '4':
+		error = w1_f19_set_i2c_speed(sl, 1);
+		break;
+	case '9':
+		error = w1_f19_set_i2c_speed(sl, 2);
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (error < 0)
+		return error;
+
+	/* Return bytes written. */
+	return count;
+}
+
+static DEVICE_ATTR_RW(speed);
+
+
+/* Busy stretch attribute for a single chip. */
+static ssize_t stretch_show(struct device *dev, struct device_attribute *attr,
+			     char *buf)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	struct w1_f19_data *data = sl->family_data;
+
+	/* Return current stretch value. */
+	return sprintf(buf, "%d\n", data->stretch);
+}
+
+static ssize_t stretch_store(struct device *dev, struct device_attribute *attr,
+			      const char *buf, size_t count)
+{
+	struct w1_slave *sl = dev_to_w1_slave(dev);
+	struct w1_f19_data *data = sl->family_data;
+
+	/* Valid values are '1' to '9' */
+	if (count < 1 || count > 2 || !buf)
+		return -EINVAL;
+	if (count == 2 && buf[1] != '\n')
+		return -EINVAL;
+	if (buf[0] < '1' || buf[0] > '9')
+		return -EINVAL;
+
+	/* Set busy stretch value. */
+	data->stretch = buf[0] & 0x0F;
+
+	/* Return bytes written. */
+	return count;
+}
+
+static DEVICE_ATTR_RW(stretch);
+
+
+/* All attributes. */
+static struct attribute *w1_f19_attrs[] = {
+	&dev_attr_speed.attr,
+	&dev_attr_stretch.attr,
+	NULL,
+};
+
+static const struct attribute_group w1_f19_group = {
+	.attrs		= w1_f19_attrs,
+};
+
+static const struct attribute_group *w1_f19_groups[] = {
+	&w1_f19_group,
+	NULL,
+};
+
+
+/* Slave add and remove functions. */
+static int w1_f19_add_slave(struct w1_slave *sl)
+{
+	struct w1_f19_data *data = NULL;
+
+	/* Allocate memory for slave specific data. */
+	data = devm_kzalloc(&sl->dev, sizeof(*data), GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+	sl->family_data = data;
+
+	/* Setup default I2C speed on slave. */
+	switch (i2c_speed) {
+	case 100:
+		__w1_f19_set_i2c_speed(sl, 0);
+		break;
+	case 400:
+		__w1_f19_set_i2c_speed(sl, 1);
+		break;
+	case 900:
+		__w1_f19_set_i2c_speed(sl, 2);
+		break;
+	default:
+		/*
+		 * A i2c_speed module parameter of anything else
+		 * than 100, 400, 900 means not to touch the
+		 * speed of the DS28E17.
+		 * We assume 400kBaud, the power-on value.
+		 */
+		data->speed = 1;
+	}
+
+	/*
+	 * Setup default busy stretch
+	 * configuration for the DS28E17.
+	 */
+	data->stretch = i2c_stretch;
+
+	/* Setup I2C adapter. */
+	data->adapter.owner      = THIS_MODULE;
+	data->adapter.algo       = &w1_f19_i2c_algorithm;
+	data->adapter.algo_data  = sl;
+	strcpy(data->adapter.name, "w1-");
+	strcat(data->adapter.name, sl->name);
+	data->adapter.dev.parent = &sl->dev;
+	data->adapter.quirks     = &w1_f19_i2c_adapter_quirks;
+
+	return i2c_add_adapter(&data->adapter);
+}
+
+static void w1_f19_remove_slave(struct w1_slave *sl)
+{
+	struct w1_f19_data *family_data = sl->family_data;
+
+	/* Delete I2C adapter. */
+	i2c_del_adapter(&family_data->adapter);
+
+	/* Free slave specific data. */
+	devm_kfree(&sl->dev, family_data);
+	sl->family_data = NULL;
+}
+
+
+/* Declarations within the w1 subsystem. */
+static struct w1_family_ops w1_f19_fops = {
+	.add_slave = w1_f19_add_slave,
+	.remove_slave = w1_f19_remove_slave,
+	.groups = w1_f19_groups,
+};
+
+static struct w1_family w1_family_19 = {
+	.fid = W1_FAMILY_DS28E17,
+	.fops = &w1_f19_fops,
+};
+
+
+/* Module init and remove functions. */
+static int __init w1_f19_init(void)
+{
+	return w1_register_family(&w1_family_19);
+}
+
+static void __exit w1_f19_fini(void)
+{
+	w1_unregister_family(&w1_family_19);
+}
+
+module_init(w1_f19_init);
+module_exit(w1_f19_fini);
+
--- a/drivers/w1/slaves/w1_therm.c
+++ b/drivers/w1/slaves/w1_therm.c
@ -268,17 +268,18 @@ static inline int w1_therm_eeprom(struct device *device)
 	int ret, max_trying = 10;
 	u8 *family_data = sl->family_data;

-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto post_unlock;
-
 	if (!sl->family_data) {
 		ret = -ENODEV;
-		goto pre_unlock;
+		goto error;
 	}

 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(rom, 0, sizeof(rom));

 	while (max_trying--) {
@ -306,17 +307,17 @@ static inline int w1_therm_eeprom(struct device *device)
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto post_unlock;
+					goto dec_refcnt;
 				}

 				ret = mutex_lock_interruptible(&dev->bus_mutex);
 				if (ret != 0)
-					goto post_unlock;
+					goto dec_refcnt;
 			} else if (!w1_strong_pullup) {
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto pre_unlock;
+					goto mt_unlock;
 				}
 			}

@ -324,11 +325,11 @@ static inline int w1_therm_eeprom(struct device *device)
 		}
 	}

-pre_unlock:
+mt_unlock:
 	mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
 	atomic_dec(THERM_REFCNT(family_data));
+error:
 	return ret;
 }

@ -350,20 +351,22 @@ static inline int w1_DS18B20_precision(struct device *device, int val)

 	if (val > 12 || val < 9) {
 		pr_warn("Unsupported precision\n");
-		return -1;
+		ret = -EINVAL;
+		goto error;
 	}

-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto post_unlock;
-
 	if (!sl->family_data) {
 		ret = -ENODEV;
-		goto pre_unlock;
+		goto error;
 	}

 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(rom, 0, sizeof(rom));

 	/* translate precision to bitmask (see datasheet page 9) */
@ -411,11 +414,10 @@ static inline int w1_DS18B20_precision(struct device *device, int val)
 		}
 	}

-pre_unlock:
 	mutex_unlock(&dev->bus_mutex);
-
-post_unlock:
+dec_refcnt:
 	atomic_dec(THERM_REFCNT(family_data));
+error:
 	return ret;
 }

@ -490,17 +492,18 @@ static ssize_t read_therm(struct device *device,
 	int ret, max_trying = 10;
 	u8 *family_data = sl->family_data;

-	ret = mutex_lock_interruptible(&dev->bus_mutex);
-	if (ret != 0)
-		goto error;
-
 	if (!family_data) {
 		ret = -ENODEV;
-		goto mt_unlock;
+		goto error;
 	}

 	/* prevent the slave from going away in sleep */
 	atomic_inc(THERM_REFCNT(family_data));
+
+	ret = mutex_lock_interruptible(&dev->bus_mutex);
+	if (ret != 0)
+		goto dec_refcnt;
+
 	memset(info->rom, 0, sizeof(info->rom));

 	while (max_trying--) {
@ -542,7 +545,7 @@ static ssize_t read_therm(struct device *device,
 				sleep_rem = msleep_interruptible(tm);
 				if (sleep_rem != 0) {
 					ret = -EINTR;
-					goto dec_refcnt;
+					goto mt_unlock;
 				}
 			}

@ -567,10 +570,10 @@ static ssize_t read_therm(struct device *device,
 			break;
 	}

-dec_refcnt:
-	atomic_dec(THERM_REFCNT(family_data));
 mt_unlock:
 	mutex_unlock(&dev->bus_mutex);
+dec_refcnt:
+	atomic_dec(THERM_REFCNT(family_data));
 error:
 	return ret;
 }
--- a/drivers/w1/w1_io.c
+++ b/drivers/w1/w1_io.c
@ -58,7 +58,7 @@ static u8 w1_read_bit(struct w1_master *dev);
 * @dev:	the master device
 * @bit:	0 - write a 0, 1 - write a 0 read the level
 */
-static u8 w1_touch_bit(struct w1_master *dev, int bit)
+u8 w1_touch_bit(struct w1_master *dev, int bit)
 {
 	if (dev->bus_master->touch_bit)
 		return dev->bus_master->touch_bit(dev->bus_master->data, bit);
@ -69,6 +69,7 @@ static u8 w1_touch_bit(struct w1_master *dev, int bit)
 		return 0;
 	}
 }
+EXPORT_SYMBOL_GPL(w1_touch_bit);

 /**
 * w1_write_bit() - Generates a write-0 or write-1 cycle.
--- a/include/linux/hyperv.h
+++ b/include/linux/hyperv.h
@ -719,6 +719,10 @@ struct vmbus_channel {

 	struct vmbus_close_msg close_msg;

+	/* Statistics */
+	u64	interrupts;	/* Host to Guest interrupts */
+	u64	sig_events;	/* Guest to Host events */
+
 	/* Channel callback's invoked in softirq context */
 	struct tasklet_struct callback_event;
 	void (*onchannel_callback)(void *context);
@ -828,6 +832,11 @@ struct vmbus_channel {
 	 */
 	struct rcu_head rcu;

+	/*
+	 * For sysfs per-channel properties.
+	 */
+	struct kobject			kobj;
+
 	/*
 	 * For performance critical channels (storage, networking
 	 * etc,), Hyper-V has a mechanism to enhance the throughput
@ -1089,6 +1098,7 @@ struct hv_device {
 	struct device device;

 	struct vmbus_channel *channel;
+	struct kset	     *channels_kset;
 };


--- a/include/linux/w1.h
+++ b/include/linux/w1.h
@ -293,6 +293,7 @@ void w1_unregister_family(struct w1_family *family);
 			w1_unregister_family)

 u8 w1_triplet(struct w1_master *dev, int bdir);
+u8 w1_touch_bit(struct w1_master *dev, int bit);
 void w1_write_8(struct w1_master *, u8);
 u8 w1_read_8(struct w1_master *);
 int w1_reset_bus(struct w1_master *);