microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

ARM: SoC: late cleanups 

These could not be part of the first cleanup branch, because they either
 came too late in the cycle, or they have dependencies on other branches.
 Important changes are:
 
 * The integrator platform is almost multiplatform capable after
   some reorganization (Linus Walleij)
 * Minor cleanups on Zynq (Michal Simek)
 * Lots of changes for Exynos and other Samsung platforms, including
   further preparations for multiplatform support and the clocks bindings
   are rearranged.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIVAwUAUz/2IGCrR//JCVInAQI+sA//baZOXHTNRR7uBh5PJgaDFIyNjtBDDyyB
 m+yYgw24n3WP1YWtFhBKza7p5Eh2spWYgffKV/logWM4SC3HjkCUsLkQwruHa2qe
 H/pCknUXqUNiwH76WVbfrABb+0tARjEB+U0QfXh7af7Zk+ZXMqQ1/ItU0YdpJiGO
 mOAI5c6gzpr953cmzuHer8foATmF5DNuJPhPDPYlgeg2+yvXgcnfi9a+AXE8Eqb1
 sZeWUJrqJERBlmsVgihq1+gPJjh0Kw7D9r835JqQeKRnywFgvGbmf5kYriPiEEBt
 hJUUnRHW6GCFQM9MemP0nOaRQlQYJA+EPqzB+0YRps0Gq+3QCIXFzZwLije/eMvr
 2YjpITS2MaTqvag1o4yNmfeG+hGMN6MgbOh9q5kLagTXn/9nsQ6aYkD9tCXw4G08
 bH3PP90AT6jQoNDoac5Pt2xPBPvY1JnnUegw5YmQQAlKeSEaiSJnHaC4gD9jzy7q
 fvoXey/Fz/ZgtZKL0wjbjhUrurS45xqZUW0MlMFOt6U7wdG4wsuemaI2PID6tKp8
 ZmZ5gyHsX+CK4GfmhFFu3XhM8hyRj3/OBSy0/Wls3znFH/6j/X1gvrH87gnS9+ax
 +Ettut5uCutDaUJRymXDlqdF9ysLC3DVHpofQPSCqVZ+IHQkUadypyc6YY1Z5mtQ
 x/nxniFA7/A=
 =1i9x
 -----END PGP SIGNATURE-----

Merge tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late cleanups from Arnd Bergmann:
 "These could not be part of the first cleanup branch, because they
  either came too late in the cycle, or they have dependencies on other
  branches.  Important changes are:

   - The integrator platform is almost multiplatform capable after some
     reorganization (Linus Walleij)
   - Minor cleanups on Zynq (Michal Simek)
   - Lots of changes for Exynos and other Samsung platforms, including
     further preparations for multiplatform support and the clocks
     bindings are rearranged"

* tag 'tags/cleanup2-3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (54 commits)
  devicetree: fix newly added exynos sata bindings
  ARM: EXYNOS: Fix compilation error in cpuidle.c
  ARM: S5P64X0: Explicitly include linux/serial_s3c.h in mach/pm-core.h
  ARM: EXYNOS: Remove hardware.h file
  ARM: SAMSUNG: Remove hardware.h inclusion
  ARM: S3C24XX: Remove invalid code from hardware.h
  dt-bindings: clock: Move exynos-audss-clk.h to dt-bindings/clock
  ARM: dts: Keep some essential LDOs enabled for arndale-octa board
  ARM: dts: Disable MDMA1 node for arndale-octa board
  ARM: S3C64XX: Fix build for implicit serial_s3c.h inclusion
  serial: s3c: Fix build of header without serial_core.h preinclusion
  ARM: EXYNOS: Allow wake-up using GIC interrupts
  ARM: EXYNOS: Stop using legacy Samsung PM code
  ARM: EXYNOS: Remove PM initcalls and useless indirection
  ARM: EXYNOS: Fix abuse of CONFIG_PM
  ARM: SAMSUNG: Move s3c_pm_check_* prototypes to plat/pm-common.h
  ARM: SAMSUNG: Move common save/restore helpers to separate file
  ARM: SAMSUNG: Move Samsung PM debug code into separate file
  ARM: SAMSUNG: Consolidate PM debug functions
  ARM: SAMSUNG: Use debug_ll_addr() to get UART base address
  ...
This commit is contained in:
Linus Torvalds 2014-04-05 15:46:37 -07:00
Родитель d2b150d064 9dfbff16b4
Коммит 2bf73dd61a
92 изменённых файлов: 1157 добавлений и 1370 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

14
Documentation/devicetree/bindings/ata/exynos-sata-phy.txt
Просмотреть файл

@ -1,14 +0,0 @@
* Samsung SATA PHY Controller
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5-sata-phy"
- reg : <registers mapping>
Example:
sata@ffe07000 {
compatible = "samsung,exynos5-sata-phy";
reg = <0xffe07000 0x1000>;
};

31
Documentation/devicetree/bindings/ata/exynos-sata.txt
Просмотреть файл

@ -4,14 +4,27 @@ SATA nodes are defined to describe on-chip Serial ATA controllers.
Each SATA controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5-sata"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
- samsung,sata-freq : <frequency in MHz>
- compatible : compatible list, contains "samsung,exynos5-sata"
- interrupts : <interrupt mapping for SATA IRQ>
- reg : <registers mapping>
- samsung,sata-freq : <frequency in MHz>
- phys : Must contain exactly one entry as specified
in phy-bindings.txt
- phy-names : Must be "sata-phy"
Optional properties:
- clocks : Must contain an entry for each entry in clock-names.
- clock-names : Shall be "sata" for the external SATA bus clock,
and "sclk_sata" for the internal controller clock.
Example:
sata@ffe08000 {
compatible = "samsung,exynos5-sata";
reg = <0xffe08000 0x1000>;
interrupts = <115>;
};
sata@122f0000 {
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122f0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock 277>, <&clock 143>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
phy-names = "sata-phy";
};

4
Documentation/devicetree/bindings/clock/zynq-7000.txt
Просмотреть файл

@ -14,6 +14,7 @@ for all clock consumers of PS clocks.
Required properties:
- #clock-cells : Must be 1
- compatible : "xlnx,ps7-clkc"
- reg : SLCR offset and size taken via syscon < 0x100 0x100 >
- ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ
(usually 33 MHz oscillators are used for Zynq platforms)
- clock-output-names : List of strings used to name the clock outputs. Shall be
@ -87,10 +88,11 @@ Clock outputs:
47: dbg_apb
Example:
clkc: clkc {
clkc: clkc@100 {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
reg = <0x100 0x100>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",

40
Documentation/devicetree/bindings/phy/samsung-phy.txt
Просмотреть файл

@ -74,3 +74,43 @@ phy-consumer@12340000 {
Refer to DT bindings documentation of particular PHY consumer devices for more
information about required PHYs and the way of specification.
Samsung SATA PHY Controller
---------------------------
SATA PHY nodes are defined to describe on-chip SATA Physical layer controllers.
Each SATA PHY controller should have its own node.
Required properties:
- compatible : compatible list, contains "samsung,exynos5250-sata-phy"
- reg : offset and length of the SATA PHY register set;
- #phy-cells : must be zero
- clocks : must be exactly one entry
- clock-names : must be "sata_phyctrl"
- samsung,exynos-sataphy-i2c-phandle : a phandle to the I2C device, no arguments
- samsung,syscon-phandle : a phandle to the PMU system controller, no arguments
Example:
sata_phy: sata-phy@12170000 {
compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
clocks = <&clock 287>;
clock-names = "sata_phyctrl";
#phy-cells = <0>;
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
samsung,syscon-phandle = <&pmu_syscon>;
};
Device-Tree bindings for sataphy i2c client driver
--------------------------------------------------
Required properties:
compatible: Should be "samsung,exynos-sataphy-i2c"
- reg: I2C address of the sataphy i2c device.
Example:
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};

4
arch/arm/Kconfig.debug
Просмотреть файл

@ -1141,7 +1141,7 @@ config DEBUG_UART_8250_FLOW_CONTROL
config DEBUG_UNCOMPRESS
bool
depends on ARCH_MULTIPLATFORM || ARCH_MSM || ARCH_EXYNOS
depends on ARCH_MULTIPLATFORM || ARCH_MSM || PLAT_SAMSUNG
default y if DEBUG_LL && !DEBUG_OMAP2PLUS_UART && \
(!DEBUG_TEGRA_UART || !ZBOOT_ROM)
help
@ -1158,7 +1158,7 @@ config DEBUG_UNCOMPRESS
config UNCOMPRESS_INCLUDE
string
default "debug/uncompress.h" if ARCH_MULTIPLATFORM || ARCH_MSM || \
ARCH_EXYNOS || ARCH_EFM32
PLAT_SAMSUNG || ARCH_EFM32
default "mach/uncompress.h"
config EARLY_PRINTK

5
arch/arm/boot/dts/exynos4.dtsi
Просмотреть файл

@ -86,6 +86,11 @@
reg = <0x10023CE0 0x20>;
};
pd_gps_alive: gps-alive-power-domain@10023D00 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023D00 0x20>;
};
gic: interrupt-controller@10490000 {
compatible = "arm,cortex-a9-gic";
#interrupt-cells = <3>;

2
arch/arm/boot/dts/exynos4210-origen.dts
Просмотреть файл

@ -19,7 +19,7 @@
/ {
model = "Insignal Origen evaluation board based on Exynos4210";
compatible = "insignal,origen", "samsung,exynos4210";
compatible = "insignal,origen", "samsung,exynos4210", "samsung,exynos4";
memory {
reg = <0x40000000 0x10000000

2
arch/arm/boot/dts/exynos4210-smdkv310.dts
Просмотреть файл

@ -19,7 +19,7 @@
/ {
model = "Samsung smdkv310 evaluation board based on Exynos4210";
compatible = "samsung,smdkv310", "samsung,exynos4210";
compatible = "samsung,smdkv310", "samsung,exynos4210", "samsung,exynos4";
memory {
reg = <0x40000000 0x80000000>;

2
arch/arm/boot/dts/exynos4210-trats.dts
Просмотреть файл

@ -17,7 +17,7 @@
/ {
model = "Samsung Trats based on Exynos4210";
compatible = "samsung,trats", "samsung,exynos4210";
compatible = "samsung,trats", "samsung,exynos4210", "samsung,exynos4";
memory {
reg = <0x40000000 0x10000000

2
arch/arm/boot/dts/exynos4210-universal_c210.dts
Просмотреть файл

@ -17,7 +17,7 @@
/ {
model = "Samsung Universal C210 based on Exynos4210 rev0";
compatible = "samsung,universal_c210", "samsung,exynos4210";
compatible = "samsung,universal_c210", "samsung,exynos4210", "samsung,exynos4";
memory {
reg = <0x40000000 0x10000000

2
arch/arm/boot/dts/exynos4210.dtsi
Просмотреть файл

@ -23,7 +23,7 @@
#include "exynos4210-pinctrl.dtsi"
/ {
compatible = "samsung,exynos4210";
compatible = "samsung,exynos4210", "samsung,exynos4";
aliases {
pinctrl0 = &pinctrl_0;

15
arch/arm/boot/dts/exynos4212.dtsi
Просмотреть файл

@ -20,18 +20,13 @@
#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4212";
compatible = "samsung,exynos4212", "samsung,exynos4";
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
};
gic: interrupt-controller@10490000 {
cpu-offset = <0x8000>;
};
interrupt-controller@10440000 {
samsung,combiner-nr = <18>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
<0 107 0>, <0 108 0>;
};
};

2
arch/arm/boot/dts/exynos4412-odroidx.dts
Просмотреть файл

@ -16,7 +16,7 @@
/ {
model = "Hardkernel ODROID-X board based on Exynos4412";
compatible = "hardkernel,odroid-x", "samsung,exynos4412";
compatible = "hardkernel,odroid-x", "samsung,exynos4412", "samsung,exynos4";
memory {
reg = <0x40000000 0x40000000>;

2
arch/arm/boot/dts/exynos4412-origen.dts
Просмотреть файл

@ -17,7 +17,7 @@
/ {
model = "Insignal Origen evaluation board based on Exynos4412";
compatible = "insignal,origen4412", "samsung,exynos4412";
compatible = "insignal,origen4412", "samsung,exynos4412", "samsung,exynos4";
memory {
reg = <0x40000000 0x40000000>;

2
arch/arm/boot/dts/exynos4412-smdk4412.dts
Просмотреть файл

@ -17,7 +17,7 @@
/ {
model = "Samsung SMDK evaluation board based on Exynos4412";
compatible = "samsung,smdk4412", "samsung,exynos4412";
compatible = "samsung,smdk4412", "samsung,exynos4412", "samsung,exynos4";
memory {
reg = <0x40000000 0x40000000>;

2
arch/arm/boot/dts/exynos4412-tiny4412.dts
Просмотреть файл

@ -16,7 +16,7 @@
/ {
model = "FriendlyARM TINY4412 board based on Exynos4412";
compatible = "friendlyarm,tiny4412", "samsung,exynos4412";
compatible = "friendlyarm,tiny4412", "samsung,exynos4412", "samsung,exynos4";
memory {
reg = <0x40000000 0x40000000>;

23
arch/arm/boot/dts/exynos4412-trats2.dts
Просмотреть файл

@ -17,7 +17,7 @@
/ {
model = "Samsung Trats 2 based on Exynos4412";
compatible = "samsung,trats2", "samsung,exynos4412";
compatible = "samsung,trats2", "samsung,exynos4412", "samsung,exynos4";
aliases {
i2c8 = &i2c_ak8975;
@ -106,6 +106,11 @@
};
};
adc: adc@126C0000 {
vdd-supply = <&ldo3_reg>;
status = "okay";
};
i2c@13890000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-slave-addr = <0x10>;
@ -589,4 +594,20 @@
};
};
};
thermistor-ap@0 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 1>; /* AP temperature */
};
thermistor-battery@1 {
compatible = "ntc,ncp15wb473";
pullup-uv = <1800000>; /* VCC_1.8V_AP */
pullup-ohm = <100000>; /* 100K */
pulldown-ohm = <100000>; /* 100K */
io-channels = <&adc 2>; /* Battery temperature */
};
};

16
arch/arm/boot/dts/exynos4412.dtsi
Просмотреть файл

@ -20,19 +20,13 @@
#include "exynos4x12.dtsi"
/ {
compatible = "samsung,exynos4412";
compatible = "samsung,exynos4412", "samsung,exynos4";
combiner: interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
};
gic: interrupt-controller@10490000 {
cpu-offset = <0x4000>;
};
interrupt-controller@10440000 {
samsung,combiner-nr = <20>;
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
<0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
};
};

26
arch/arm/boot/dts/exynos4x12.dtsi
Просмотреть файл

@ -31,6 +31,12 @@
mshc0 = &mshc_0;
};
pmu {
compatible = "arm,cortex-a9-pmu";
interrupt-parent = <&combiner>;
interrupts = <2 2>, <3 2>, <18 2>, <19 2>;
};
pd_isp: isp-power-domain@10023CA0 {
compatible = "samsung,exynos4210-pd";
reg = <0x10023CA0 0x20>;
@ -62,6 +68,14 @@
};
};
combiner: interrupt-controller@10440000 {
interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>,
<0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>,
<0 8 0>, <0 9 0>, <0 10 0>, <0 11 0>,
<0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>,
<0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>;
};
pinctrl_0: pinctrl@11400000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x11400000 0x1000>;
@ -80,6 +94,18 @@
};
};
adc: adc@126C0000 {
compatible = "samsung,exynos-adc-v1";
reg = <0x126C0000 0x100>, <0x10020718 0x4>;
interrupt-parent = <&combiner>;
interrupts = <10 3>;
clocks = <&clock CLK_TSADC>;
clock-names = "adc";
#io-channel-cells = <1>;
io-channel-ranges;
status = "disabled";
};
pinctrl_2: pinctrl@03860000 {
compatible = "samsung,exynos4x12-pinctrl";
reg = <0x03860000 0x1000>;

23
arch/arm/boot/dts/exynos5250-arndale.dts
Просмотреть файл

@ -15,7 +15,7 @@
/ {
model = "Insignal Arndale evaluation board based on EXYNOS5250";
compatible = "insignal,arndale", "samsung,exynos5250";
compatible = "insignal,arndale", "samsung,exynos5250", "samsung,exynos5";
memory {
reg = <0x40000000 0x80000000>;
@ -375,6 +375,27 @@
};
};
i2c@121D0000 {
status = "okay";
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <40000>;
samsung,i2c-slave-addr = <0x38>;
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
sata@122F0000 {
status = "okay";
};
sata-phy@12170000 {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
mmc_0: mmc@12200000 {
status = "okay";
num-slots = <1>;

23
arch/arm/boot/dts/exynos5250-smdk5250.dts
Просмотреть файл

@ -14,7 +14,7 @@
/ {
model = "SAMSUNG SMDK5250 board based on EXYNOS5250";
compatible = "samsung,smdk5250", "samsung,exynos5250";
compatible = "samsung,smdk5250", "samsung,exynos5250", "samsung,exynos5";
aliases {
};
@ -242,16 +242,12 @@
samsung,i2c-slave-addr = <0x38>;
status = "okay";
sata-phy {
compatible = "samsung,sata-phy";
sata_phy_i2c:sata-phy@38 {
compatible = "samsung,exynos-sataphy-i2c";
reg = <0x38>;
};
};
sata@122F0000 {
samsung,sata-freq = <66>;
};
i2c@12C80000 {
samsung,i2c-sda-delay = <100>;
samsung,i2c-max-bus-freq = <66000>;
@ -274,6 +270,15 @@
};
};
sata@122F0000 {
status = "okay";
};
sata-phy@12170000 {
status = "okay";
samsung,exynos-sataphy-i2c-phandle = <&sata_phy_i2c>;
};
mmc@12200000 {
status = "okay";
num-slots = <1>;
@ -310,10 +315,6 @@
};
};
spi_0: spi@12d20000 {
status = "disabled";
};
spi_1: spi@12d30000 {
status = "okay";

2
arch/arm/boot/dts/exynos5250-snow.dts
Просмотреть файл

@ -14,7 +14,7 @@
/ {
model = "Google Snow";
compatible = "google,snow", "samsung,exynos5250";
compatible = "google,snow", "samsung,exynos5250", "samsung,exynos5";
aliases {
i2c104 = &i2c_104;

30
arch/arm/boot/dts/exynos5250.dtsi
Просмотреть файл

@ -21,10 +21,10 @@
#include "exynos5.dtsi"
#include "exynos5250-pinctrl.dtsi"
#include <dt-bindings/clk/exynos-audss-clk.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5250";
compatible = "samsung,exynos5250", "samsung,exynos5";
aliases {
spi0 = &spi_0;
@ -47,6 +47,7 @@
i2c6 = &i2c_6;
i2c7 = &i2c_7;
i2c8 = &i2c_8;
i2c9 = &i2c_9;
pinctrl0 = &pinctrl_0;
pinctrl1 = &pinctrl_1;
pinctrl2 = &pinctrl_2;
@ -235,16 +236,25 @@
};
sata@122F0000 {
compatible = "samsung,exynos5-sata-ahci";
compatible = "snps,dwc-ahci";
samsung,sata-freq = <66>;
reg = <0x122F0000 0x1ff>;
interrupts = <0 115 0>;
clocks = <&clock CLK_SATA>, <&clock CLK_SCLK_SATA>;
clock-names = "sata", "sclk_sata";
phys = <&sata_phy>;
phy-names = "sata-phy";
status = "disabled";
};
sata-phy@12170000 {
compatible = "samsung,exynos5-sata-phy";
sata_phy: sata-phy@12170000 {
compatible = "samsung,exynos5250-sata-phy";
reg = <0x12170000 0x1ff>;
clocks = <&clock 287>;
clock-names = "sata_phyctrl";
#phy-cells = <0>;
samsung,syscon-phandle = <&pmu_system_controller>;
status = "disabled";
};
i2c_0: i2c@12C60000 {
@ -362,7 +372,7 @@
status = "disabled";
};
i2c@121D0000 {
i2c_9: i2c@121D0000 {
compatible = "samsung,exynos5-sata-phy-i2c";
reg = <0x121D0000 0x100>;
#address-cells = <1>;
@ -718,4 +728,12 @@
io-channel-ranges;
status = "disabled";
};
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
clocks = <&clock 348>;
clock-names = "secss";
};
};

17
arch/arm/boot/dts/exynos5420-arndale-octa.dts
Просмотреть файл

@ -16,7 +16,7 @@
/ {
model = "Insignal Arndale Octa evaluation board based on EXYNOS5420";
compatible = "insignal,arndale-octa", "samsung,exynos5420";
compatible = "insignal,arndale-octa", "samsung,exynos5420", "samsung,exynos5";
memory {
reg = <0x20000000 0x80000000>;
@ -113,6 +113,7 @@
regulator-name = "PVDD_APIO_MMCON_1V8";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
};
ldo4_reg: LDO4 {
@ -150,6 +151,7 @@
regulator-name = "PVDD_USB_3V3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
regulator-always-on;
};
ldo10_reg: LDO10 {
@ -218,6 +220,7 @@
regulator-name = "PVDD_MIFS_1V1";
regulator-min-microvolt = <1200000>;
regulator-max-microvolt = <1200000>;
regulator-always-on;
};
ldo24_reg: LDO24 {
@ -361,4 +364,16 @@
gpio-key,wakeup;
};
};
amba {
mdma1: mdma@11C10000 {
/*
* MDMA1 can support both secure and non-secure
* AXI transactions. When this is enabled in the kernel
* for boards that run in secure mode, we are getting
* imprecise external aborts causing the kernel to oops.
*/
status = "disabled";
};
};
};

2
arch/arm/boot/dts/exynos5420-smdk5420.dts
Просмотреть файл

@ -14,7 +14,7 @@
/ {
model = "Samsung SMDK5420 board based on EXYNOS5420";
compatible = "samsung,smdk5420", "samsung,exynos5420";
compatible = "samsung,smdk5420", "samsung,exynos5420", "samsung,exynos5";
memory {
reg = <0x20000000 0x80000000>;

13
arch/arm/boot/dts/exynos5420.dtsi
Просмотреть файл

@ -17,10 +17,10 @@
#include "exynos5.dtsi"
#include "exynos5420-pinctrl.dtsi"
#include <dt-bindings/clk/exynos-audss-clk.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
/ {
compatible = "samsung,exynos5420";
compatible = "samsung,exynos5420", "samsung,exynos5";
aliases {
mshc0 = &mmc_0;
@ -723,4 +723,13 @@
clock-names = "watchdog";
samsung,syscon-phandle = <&pmu_system_controller>;
};
sss@10830000 {
compatible = "samsung,exynos4210-secss";
reg = <0x10830000 0x10000>;
interrupts = <0 112 0>;
clocks = <&clock 471>;
clock-names = "secss";
samsung,power-domain = <&g2d_pd>;
};
};

2
arch/arm/boot/dts/exynos5440-sd5v1.dts
Просмотреть файл

@ -14,7 +14,7 @@
/ {
model = "SAMSUNG SD5v1 board based on EXYNOS5440";
compatible = "samsung,sd5v1", "samsung,exynos5440";
compatible = "samsung,sd5v1", "samsung,exynos5440", "samsung,exynos5";
chosen {
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";

2
arch/arm/boot/dts/exynos5440-ssdk5440.dts
Просмотреть файл

@ -14,7 +14,7 @@
/ {
model = "SAMSUNG SSDK5440 board based on EXYNOS5440";
compatible = "samsung,ssdk5440", "samsung,exynos5440";
compatible = "samsung,ssdk5440", "samsung,exynos5440", "samsung,exynos5";
chosen {
bootargs = "root=/dev/sda2 rw rootwait ignore_loglevel earlyprintk no_console_suspend mem=2048M@0x80000000 mem=6144M@0x100000000 console=ttySAC0,115200";

2
arch/arm/boot/dts/exynos5440.dtsi
Просмотреть файл

@ -13,7 +13,7 @@
#include "skeleton.dtsi"
/ {
compatible = "samsung,exynos5440";
compatible = "samsung,exynos5440", "samsung,exynos5";
interrupt-parent = <&gic>;

44
arch/arm/boot/dts/zynq-7000.dtsi
Просмотреть файл

@ -129,30 +129,28 @@
} ;
slcr: slcr@f8000000 {
compatible = "xlnx,zynq-slcr";
#address-cells = <1>;
#size-cells = <1>;
compatible = "xlnx,zynq-slcr", "syscon";
reg = <0xF8000000 0x1000>;
clocks {
#address-cells = <1>;
#size-cells = <0>;
clkc: clkc {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
fclk-enable = <0>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
};
ranges;
clkc: clkc@100 {
#clock-cells = <1>;
compatible = "xlnx,ps7-clkc";
ps-clk-frequency = <33333333>;
fclk-enable = <0>;
clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x",
"cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x",
"dci", "lqspi", "smc", "pcap", "gem0", "gem1",
"fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1",
"sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1",
"dma", "usb0_aper", "usb1_aper", "gem0_aper",
"gem1_aper", "sdio0_aper", "sdio1_aper",
"spi0_aper", "spi1_aper", "can0_aper", "can1_aper",
"i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper",
"gpio_aper", "lqspi_aper", "smc_aper", "swdt",
"dbg_trc", "dbg_apb";
reg = <0x100 0x100>;
};
};

3
arch/arm/include/debug/zynq.S
Просмотреть файл

@ -42,6 +42,9 @@
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #UART_SR_OFFSET]
tst \rd, #UART_SR_TXEMPTY
beq 1001b
.endm
.macro busyuart,rd,rx

16
arch/arm/mach-exynos/Kconfig
Просмотреть файл

@ -24,7 +24,7 @@ config ARCH_EXYNOS4
select HAVE_SMP
select MIGHT_HAVE_CACHE_L2X0
select PINCTRL
select PM_GENERIC_DOMAINS if PM
select PM_GENERIC_DOMAINS if PM_RUNTIME
select S5P_DEV_MFC
help
Samsung EXYNOS4 SoCs based systems
@ -46,10 +46,8 @@ config CPU_EXYNOS4210
default y
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select ARM_CPU_SUSPEND if PM
select ARM_CPU_SUSPEND if PM_SLEEP
select PINCTRL_EXYNOS
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4210 CPU support
@ -60,8 +58,6 @@ config SOC_EXYNOS4212
depends on ARCH_EXYNOS4
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select S5P_PM if PM
select S5P_SLEEP if PM
select SAMSUNG_DMADEV
help
Enable EXYNOS4212 SoC support
@ -82,9 +78,7 @@ config SOC_EXYNOS5250
depends on ARCH_EXYNOS5
select ARCH_HAS_BANDGAP
select PINCTRL_EXYNOS
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select PM_GENERIC_DOMAINS if PM_RUNTIME
select S5P_DEV_MFC
select SAMSUNG_DMADEV
help
@ -94,9 +88,7 @@ config SOC_EXYNOS5420
bool "SAMSUNG EXYNOS5420"
default y
depends on ARCH_EXYNOS5
select PM_GENERIC_DOMAINS if PM
select S5P_PM if PM
select S5P_SLEEP if PM
select PM_GENERIC_DOMAINS if PM_RUNTIME
help
Enable EXYNOS5420 SoC support

9
arch/arm/mach-exynos/Makefile
Просмотреть файл

@ -12,9 +12,9 @@ obj- :=
# Core
obj-$(CONFIG_ARCH_EXYNOS) += common.o
obj-$(CONFIG_ARCH_EXYNOS) += exynos.o
obj-$(CONFIG_S5P_PM) += pm.o
obj-$(CONFIG_PM_SLEEP) += pm.o sleep.o
obj-$(CONFIG_PM_GENERIC_DOMAINS) += pm_domains.o
obj-$(CONFIG_CPU_IDLE) += cpuidle.o
@ -29,8 +29,3 @@ obj-$(CONFIG_ARCH_EXYNOS) += firmware.o
plus_sec := $(call as-instr,.arch_extension sec,+sec)
AFLAGS_exynos-smc.o :=-Wa,-march=armv7-a$(plus_sec)
# machine support
obj-$(CONFIG_ARCH_EXYNOS4) += mach-exynos4-dt.o
obj-$(CONFIG_ARCH_EXYNOS5) += mach-exynos5-dt.o

17
arch/arm/mach-exynos/common.h
Просмотреть файл

@ -19,14 +19,27 @@ void mct_init(void __iomem *base, int irq_g0, int irq_l0, int irq_l1);
struct map_desc;
void exynos_init_io(void);
void exynos4_restart(enum reboot_mode mode, const char *cmd);
void exynos5_restart(enum reboot_mode mode, const char *cmd);
void exynos_restart(enum reboot_mode mode, const char *cmd);
void exynos_cpuidle_init(void);
void exynos_cpufreq_init(void);
void exynos_init_late(void);
void exynos_firmware_init(void);
#ifdef CONFIG_PINCTRL_EXYNOS
extern u32 exynos_get_eint_wake_mask(void);
#else
static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
#endif
#ifdef CONFIG_PM_SLEEP
extern void __init exynos_pm_init(void);
#else
static inline void exynos_pm_init(void) {}
#endif
extern void exynos_cpu_resume(void);
extern struct smp_operations exynos_smp_ops;
extern void exynos_cpu_die(unsigned int cpu);

3
arch/arm/mach-exynos/cpuidle.c
Просмотреть файл

@ -27,7 +27,6 @@
#include <plat/cpu.h>
#include <plat/pm.h>
#include <mach/pm-core.h>
#include <mach/map.h>
#include "common.h"
@ -128,7 +127,7 @@ static int exynos4_enter_core0_aftr(struct cpuidle_device *dev,
/* Set value of power down register for aftr mode */
exynos_sys_powerdown_conf(SYS_AFTR);
__raw_writel(virt_to_phys(s3c_cpu_resume), REG_DIRECTGO_ADDR);
__raw_writel(virt_to_phys(exynos_cpu_resume), REG_DIRECTGO_ADDR);
__raw_writel(S5P_CHECK_AFTR, REG_DIRECTGO_FLAG);
save_cpu_arch_register();

231
arch/arm/mach-exynos/common.c → arch/arm/mach-exynos/exynos.c
Просмотреть файл

@ -1,105 +1,40 @@
/*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* SAMSUNG EXYNOS Flattened Device Tree enabled machine
*
* Common Codes for EXYNOS
* Copyright (c) 2010-2014 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/bitops.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqchip.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/device.h>
#include <linux/gpio.h>
#include <clocksource/samsung_pwm.h>
#include <linux/sched.h>
#include <linux/serial_core.h>
#include <linux/kernel.h>
#include <linux/serial_s3c.h>
#include <linux/of.h>
#include <linux/of_fdt.h>
#include <linux/of_irq.h>
#include <linux/pm_domain.h>
#include <linux/export.h>
#include <linux/irqdomain.h>
#include <linux/of_address.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/irqchip/chained_irq.h>
#include <linux/of_fdt.h>
#include <linux/of_platform.h>
#include <linux/platform_device.h>
#include <linux/pm_domain.h>
#include <asm/proc-fns.h>
#include <asm/exception.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/memory.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include "common.h"
#include "mfc.h"
#include "regs-pmu.h"
#define L2_AUX_VAL 0x7C470001
#define L2_AUX_MASK 0xC200ffff
static const char name_exynos4210[] = "EXYNOS4210";
static const char name_exynos4212[] = "EXYNOS4212";
static const char name_exynos4412[] = "EXYNOS4412";
static const char name_exynos5250[] = "EXYNOS5250";
static const char name_exynos5420[] = "EXYNOS5420";
static const char name_exynos5440[] = "EXYNOS5440";
static void exynos4_map_io(void);
static void exynos5_map_io(void);
static int exynos_init(void);
static struct cpu_table cpu_ids[] __initdata = {
{
.idcode = EXYNOS4210_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init = exynos_init,
.name = name_exynos4210,
}, {
.idcode = EXYNOS4212_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init = exynos_init,
.name = name_exynos4212,
}, {
.idcode = EXYNOS4412_CPU_ID,
.idmask = EXYNOS4_CPU_MASK,
.map_io = exynos4_map_io,
.init = exynos_init,
.name = name_exynos4412,
}, {
.idcode = EXYNOS5250_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init = exynos_init,
.name = name_exynos5250,
}, {
.idcode = EXYNOS5420_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.map_io = exynos5_map_io,
.init = exynos_init,
.name = name_exynos5420,
}, {
.idcode = EXYNOS5440_SOC_ID,
.idmask = EXYNOS5_SOC_MASK,
.init = exynos_init,
.name = name_exynos5440,
},
};
/* Initial IO mappings */
static struct map_desc exynos4_iodesc[] __initdata = {
{
.virtual = (unsigned long)S3C_VA_SYS,
@ -263,19 +198,11 @@ static struct map_desc exynos5_iodesc[] __initdata = {
},
};
void exynos4_restart(enum reboot_mode mode, const char *cmd)
{
__raw_writel(0x1, S5P_SWRESET);
}
void exynos5_restart(enum reboot_mode mode, const char *cmd)
void exynos_restart(enum reboot_mode mode, const char *cmd)
{
struct device_node *np;
u32 val;
void __iomem *addr;
val = 0x1;
addr = EXYNOS_SWRESET;
u32 val = 0x1;
void __iomem *addr = EXYNOS_SWRESET;
if (of_machine_is_compatible("samsung,exynos5440")) {
u32 status;
@ -315,6 +242,7 @@ void __init exynos_init_late(void)
return;
pm_genpd_poweroff_unused();
exynos_pm_init();
}
static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
@ -345,6 +273,28 @@ static int __init exynos_fdt_map_chipid(unsigned long node, const char *uname,
*
* register the standard cpu IO areas
*/
static void __init exynos_map_io(void)
{
if (soc_is_exynos4())
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
if (soc_is_exynos5())
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
if (soc_is_exynos4210()) {
if (samsung_rev() == EXYNOS4210_REV_0)
iotable_init(exynos4_iodesc0,
ARRAY_SIZE(exynos4_iodesc0));
else
iotable_init(exynos4_iodesc1,
ARRAY_SIZE(exynos4_iodesc1));
iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
}
if (soc_is_exynos4212() || soc_is_exynos4412())
iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
if (soc_is_exynos5250())
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
}
void __init exynos_init_io(void)
{
@ -355,30 +305,7 @@ void __init exynos_init_io(void)
/* detect cpu id and rev. */
s5p_init_cpu(S5P_VA_CHIPID);
s3c_init_cpu(samsung_cpu_id, cpu_ids, ARRAY_SIZE(cpu_ids));
}
static void __init exynos4_map_io(void)
{
iotable_init(exynos4_iodesc, ARRAY_SIZE(exynos4_iodesc));
if (soc_is_exynos4210() && samsung_rev() == EXYNOS4210_REV_0)
iotable_init(exynos4_iodesc0, ARRAY_SIZE(exynos4_iodesc0));
else
iotable_init(exynos4_iodesc1, ARRAY_SIZE(exynos4_iodesc1));
if (soc_is_exynos4210())
iotable_init(exynos4210_iodesc, ARRAY_SIZE(exynos4210_iodesc));
if (soc_is_exynos4212() || soc_is_exynos4412())
iotable_init(exynos4x12_iodesc, ARRAY_SIZE(exynos4x12_iodesc));
}
static void __init exynos5_map_io(void)
{
iotable_init(exynos5_iodesc, ARRAY_SIZE(exynos5_iodesc));
if (soc_is_exynos5250())
iotable_init(exynos5250_iodesc, ARRAY_SIZE(exynos5250_iodesc));
exynos_map_io();
}
struct bus_type exynos_subsys = {
@ -386,10 +313,6 @@ struct bus_type exynos_subsys = {
.dev_name = "exynos-core",
};
static struct device exynos4_dev = {
.bus = &exynos_subsys,
};
static int __init exynos_core_init(void)
{
return subsys_system_register(&exynos_subsys, NULL);
@ -412,9 +335,77 @@ static int __init exynos4_l2x0_cache_init(void)
}
early_initcall(exynos4_l2x0_cache_init);
static int __init exynos_init(void)
static void __init exynos_dt_machine_init(void)
{
printk(KERN_INFO "EXYNOS: Initializing architecture\n");
struct device_node *i2c_np;
const char *i2c_compat = "samsung,s3c2440-i2c";
unsigned int tmp;
int id;
return device_register(&exynos4_dev);
/*
* Exynos5's legacy i2c controller and new high speed i2c
* controller have muxed interrupt sources. By default the
* interrupts for 4-channel HS-I2C controller are enabled.
* If node for first four channels of legacy i2c controller
* are available then re-configure the interrupts via the
* system register.
*/
if (soc_is_exynos5()) {
for_each_compatible_node(i2c_np, NULL, i2c_compat) {
if (of_device_is_available(i2c_np)) {
id = of_alias_get_id(i2c_np, "i2c");
if (id < 4) {
tmp = readl(EXYNOS5_SYS_I2C_CFG);
writel(tmp & ~(0x1 << id),
EXYNOS5_SYS_I2C_CFG);
}
}
}
}
exynos_cpuidle_init();
exynos_cpufreq_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos_dt_compat[] __initconst = {
"samsung,exynos4",
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
"samsung,exynos5",
"samsung,exynos5250",
"samsung,exynos5420",
"samsung,exynos5440",
NULL
};
static void __init exynos_reserve(void)
{
#ifdef CONFIG_S5P_DEV_MFC
int i;
char *mfc_mem[] = {
"samsung,mfc-v5",
"samsung,mfc-v6",
"samsung,mfc-v7",
};
for (i = 0; i < ARRAY_SIZE(mfc_mem); i++)
if (of_scan_flat_dt(s5p_fdt_alloc_mfc_mem, mfc_mem[i]))
break;
#endif
}
DT_MACHINE_START(EXYNOS_DT, "SAMSUNG EXYNOS (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
.init_machine = exynos_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos_dt_compat,
.restart = exynos_restart,
.reserve = exynos_reserve,
MACHINE_END

18
arch/arm/mach-exynos/include/mach/hardware.h
Просмотреть файл

@ -1,18 +0,0 @@
/* linux/arch/arm/mach-exynos4/include/mach/hardware.h
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* EXYNOS4 - Hardware support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H __FILE__
/* currently nothing here, placeholder */
#endif /* __ASM_ARCH_HARDWARE_H */

75
arch/arm/mach-exynos/include/mach/pm-core.h
Просмотреть файл

@ -1,75 +0,0 @@
/* linux/arch/arm/mach-exynos4/include/mach/pm-core.h
*
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Based on arch/arm/mach-s3c2410/include/mach/pm-core.h,
* Copyright 2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* EXYNOS4210 - PM core support for arch/arm/plat-s5p/pm.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_PM_CORE_H
#define __ASM_ARCH_PM_CORE_H __FILE__
#include <linux/of.h>
#include <mach/map.h>
#define S5P_EINT_WAKEUP_MASK (S5P_VA_PMU + 0x0604)
#define S5P_WAKEUP_MASK (S5P_VA_PMU + 0x0608)
#ifdef CONFIG_PINCTRL_EXYNOS
extern u32 exynos_get_eint_wake_mask(void);
#else
static inline u32 exynos_get_eint_wake_mask(void) { return 0xffffffff; }
#endif
static inline void s3c_pm_debug_init_uart(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_prepare_irqs(void)
{
__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
__raw_writel(s3c_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
}
static inline void s3c_pm_arch_stop_clocks(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_show_resume_irqs(void)
{
/* nothing here yet */
}
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save)
{
/* nothing here yet */
}
static inline void s3c_pm_restored_gpios(void)
{
/* nothing here yet */
}
static inline void samsung_pm_saved_gpios(void)
{
/* nothing here yet */
}
/* Compatibility definitions to make plat-samsung/pm.c compile */
#define IRQ_EINT_BIT(x) 1
#define s3c_irqwake_intallow 0
#define s3c_irqwake_eintallow 0
#endif /* __ASM_ARCH_PM_CORE_H */

59
arch/arm/mach-exynos/mach-exynos4-dt.c
Просмотреть файл

@ -1,59 +0,0 @@
/*
* Samsung's EXYNOS4 flattened device tree enabled machine
*
* Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
* http://www.samsung.com
* Copyright (c) 2010-2011 Linaro Ltd.
* www.linaro.org
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <asm/mach/arch.h>
#include <plat/mfc.h>
#include "common.h"
static void __init exynos4_dt_machine_init(void)
{
exynos_cpuidle_init();
exynos_cpufreq_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos4_dt_compat[] __initdata = {
"samsung,exynos4210",
"samsung,exynos4212",
"samsung,exynos4412",
NULL
};
static void __init exynos4_reserve(void)
{
#ifdef CONFIG_S5P_DEV_MFC
struct s5p_mfc_dt_meminfo mfc_mem;
/* Reserve memory for MFC only if it's available */
mfc_mem.compatible = "samsung,mfc-v5";
if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
mfc_mem.lsize);
#endif
}
DT_MACHINE_START(EXYNOS4210_DT, "Samsung Exynos4 (Flattened Device Tree)")
/* Maintainer: Thomas Abraham <thomas.abraham@linaro.org> */
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_early = exynos_firmware_init,
.init_machine = exynos4_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos4_dt_compat,
.restart = exynos4_restart,
.reserve = exynos4_reserve,
MACHINE_END

81
arch/arm/mach-exynos/mach-exynos5-dt.c
Просмотреть файл

@ -1,81 +0,0 @@
/*
* SAMSUNG EXYNOS5250 Flattened Device Tree enabled machine
*
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/of_platform.h>
#include <linux/of_fdt.h>
#include <linux/io.h>
#include <asm/mach/arch.h>
#include <plat/mfc.h>
#include "common.h"
#include "regs-pmu.h"
static void __init exynos5_dt_machine_init(void)
{
struct device_node *i2c_np;
const char *i2c_compat = "samsung,s3c2440-i2c";
unsigned int tmp;
/*
* Exynos5's legacy i2c controller and new high speed i2c
* controller have muxed interrupt sources. By default the
* interrupts for 4-channel HS-I2C controller are enabled.
* If node for first four channels of legacy i2c controller
* are available then re-configure the interrupts via the
* system register.
*/
for_each_compatible_node(i2c_np, NULL, i2c_compat) {
if (of_device_is_available(i2c_np)) {
if (of_alias_get_id(i2c_np, "i2c") < 4) {
tmp = readl(EXYNOS5_SYS_I2C_CFG);
writel(tmp & ~(0x1 << of_alias_get_id(i2c_np, "i2c")),
EXYNOS5_SYS_I2C_CFG);
}
}
}
exynos_cpuidle_init();
exynos_cpufreq_init();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static char const *exynos5_dt_compat[] __initdata = {
"samsung,exynos5250",
"samsung,exynos5420",
"samsung,exynos5440",
NULL
};
static void __init exynos5_reserve(void)
{
#ifdef CONFIG_S5P_DEV_MFC
struct s5p_mfc_dt_meminfo mfc_mem;
/* Reserve memory for MFC only if it's available */
mfc_mem.compatible = "samsung,mfc-v6";
if (of_scan_flat_dt(s5p_fdt_find_mfc_mem, &mfc_mem))
s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize, mfc_mem.loff,
mfc_mem.lsize);
#endif
}
DT_MACHINE_START(EXYNOS5_DT, "SAMSUNG EXYNOS5 (Flattened Device Tree)")
/* Maintainer: Kukjin Kim <kgene.kim@samsung.com> */
.smp = smp_ops(exynos_smp_ops),
.map_io = exynos_init_io,
.init_machine = exynos5_dt_machine_init,
.init_late = exynos_init_late,
.dt_compat = exynos5_dt_compat,
.restart = exynos5_restart,
.reserve = exynos5_reserve,
MACHINE_END

16
arch/arm/mach-exynos/mfc.h Normal file
Просмотреть файл

@ -0,0 +1,16 @@
/*
* Copyright (C) 2013 Samsung Electronics Co.Ltd
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
#ifndef __MACH_EXYNOS_MFC_H
#define __MACH_EXYNOS_MFC_H __FILE__
int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
int depth, void *data);
#endif /* __MACH_EXYNOS_MFC_H */

2
arch/arm/mach-exynos/platsmp.c
Просмотреть файл

@ -26,8 +26,6 @@
#include <asm/smp_scu.h>
#include <asm/firmware.h>
#include <mach/hardware.h>
#include <plat/cpu.h>
#include "common.h"

174
arch/arm/mach-exynos/pm.c
Просмотреть файл

@ -17,24 +17,35 @@
#include <linux/suspend.h>
#include <linux/syscore_ops.h>
#include <linux/io.h>
#include <linux/irqchip/arm-gic.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <asm/cacheflush.h>
#include <asm/hardware/cache-l2x0.h>
#include <asm/smp_scu.h>
#include <asm/suspend.h>
#include <plat/cpu.h>
#include <plat/pm.h>
#include <plat/pm-common.h>
#include <plat/pll.h>
#include <plat/regs-srom.h>
#include <mach/map.h>
#include <mach/pm-core.h>
#include "common.h"
#include "regs-pmu.h"
/**
* struct exynos_wkup_irq - Exynos GIC to PMU IRQ mapping
* @hwirq: Hardware IRQ signal of the GIC
* @mask: Mask in PMU wake-up mask register
*/
struct exynos_wkup_irq {
unsigned int hwirq;
u32 mask;
};
static struct sleep_save exynos5_sys_save[] = {
SAVE_ITEM(EXYNOS5_SYS_I2C_CFG),
};
@ -48,6 +59,46 @@ static struct sleep_save exynos_core_save[] = {
SAVE_ITEM(S5P_SROM_BC3),
};
/*
* GIC wake-up support
*/
static u32 exynos_irqwake_intmask = 0xffffffff;
static const struct exynos_wkup_irq exynos4_wkup_irq[] = {
{ 76, BIT(1) }, /* RTC alarm */
{ 77, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};
static const struct exynos_wkup_irq exynos5250_wkup_irq[] = {
{ 75, BIT(1) }, /* RTC alarm */
{ 76, BIT(2) }, /* RTC tick */
{ /* sentinel */ },
};
static int exynos_irq_set_wake(struct irq_data *data, unsigned int state)
{
const struct exynos_wkup_irq *wkup_irq;
if (soc_is_exynos5250())
wkup_irq = exynos5250_wkup_irq;
else
wkup_irq = exynos4_wkup_irq;
while (wkup_irq->mask) {
if (wkup_irq->hwirq == data->hwirq) {
if (!state)
exynos_irqwake_intmask |= wkup_irq->mask;
else
exynos_irqwake_intmask &= ~wkup_irq->mask;
return 0;
}
++wkup_irq;
}
return -ENOENT;
}
/* For Cortex-A9 Diagnostic and Power control register */
static unsigned int save_arm_register[2];
@ -72,6 +123,10 @@ static void exynos_pm_prepare(void)
{
unsigned int tmp;
/* Set wake-up mask registers */
__raw_writel(exynos_get_eint_wake_mask(), S5P_EINT_WAKEUP_MASK);
__raw_writel(exynos_irqwake_intmask & ~(1 << 31), S5P_WAKEUP_MASK);
s3c_pm_do_save(exynos_core_save, ARRAY_SIZE(exynos_core_save));
if (soc_is_exynos5250()) {
@ -89,42 +144,9 @@ static void exynos_pm_prepare(void)
/* ensure at least INFORM0 has the resume address */
__raw_writel(virt_to_phys(s3c_cpu_resume), S5P_INFORM0);
__raw_writel(virt_to_phys(exynos_cpu_resume), S5P_INFORM0);
}
static int exynos_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = exynos_pm_prepare;
pm_cpu_sleep = exynos_cpu_suspend;
return 0;
}
static struct subsys_interface exynos_pm_interface = {
.name = "exynos_pm",
.subsys = &exynos_subsys,
.add_dev = exynos_pm_add,
};
static __init int exynos_pm_drvinit(void)
{
unsigned int tmp;
if (soc_is_exynos5440())
return 0;
s3c_pm_init();
/* All wakeup disable */
tmp = __raw_readl(S5P_WAKEUP_MASK);
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
return subsys_interface_register(&exynos_pm_interface);
}
arch_initcall(exynos_pm_drvinit);
static int exynos_pm_suspend(void)
{
unsigned long tmp;
@ -220,12 +242,80 @@ static struct syscore_ops exynos_pm_syscore_ops = {
.resume = exynos_pm_resume,
};
static __init int exynos_pm_syscore_init(void)
{
if (soc_is_exynos5440())
return 0;
/*
* Suspend Ops
*/
static int exynos_suspend_enter(suspend_state_t state)
{
int ret;
s3c_pm_debug_init();
S3C_PMDBG("%s: suspending the system...\n", __func__);
S3C_PMDBG("%s: wakeup masks: %08x,%08x\n", __func__,
exynos_irqwake_intmask, exynos_get_eint_wake_mask());
if (exynos_irqwake_intmask == -1U
&& exynos_get_eint_wake_mask() == -1U) {
pr_err("%s: No wake-up sources!\n", __func__);
pr_err("%s: Aborting sleep\n", __func__);
return -EINVAL;
}
s3c_pm_save_uarts();
exynos_pm_prepare();
flush_cache_all();
s3c_pm_check_store();
ret = cpu_suspend(0, exynos_cpu_suspend);
if (ret)
return ret;
s3c_pm_restore_uarts();
S3C_PMDBG("%s: wakeup stat: %08x\n", __func__,
__raw_readl(S5P_WAKEUP_STAT));
s3c_pm_check_restore();
S3C_PMDBG("%s: resuming the system...\n", __func__);
register_syscore_ops(&exynos_pm_syscore_ops);
return 0;
}
arch_initcall(exynos_pm_syscore_init);
static int exynos_suspend_prepare(void)
{
s3c_pm_check_prepare();
return 0;
}
static void exynos_suspend_finish(void)
{
s3c_pm_check_cleanup();
}
static const struct platform_suspend_ops exynos_suspend_ops = {
.enter = exynos_suspend_enter,
.prepare = exynos_suspend_prepare,
.finish = exynos_suspend_finish,
.valid = suspend_valid_only_mem,
};
void __init exynos_pm_init(void)
{
u32 tmp;
/* Platform-specific GIC callback */
gic_arch_extn.irq_set_wake = exynos_irq_set_wake;
/* All wakeup disable */
tmp = __raw_readl(S5P_WAKEUP_MASK);
tmp |= ((0xFF << 8) | (0x1F << 1));
__raw_writel(tmp, S5P_WAKEUP_MASK);
register_syscore_ops(&exynos_pm_syscore_ops);
suspend_set_ops(&exynos_suspend_ops);
}

3
arch/arm/mach-exynos/regs-pmu.h
Просмотреть файл

@ -26,11 +26,12 @@
#define S5P_USE_STANDBY_WFI0 (1 << 16)
#define S5P_USE_STANDBY_WFE0 (1 << 24)
#define S5P_SWRESET S5P_PMUREG(0x0400)
#define EXYNOS_SWRESET S5P_PMUREG(0x0400)
#define EXYNOS5440_SWRESET S5P_PMUREG(0x00C4)
#define S5P_WAKEUP_STAT S5P_PMUREG(0x0600)
#define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604)
#define S5P_WAKEUP_MASK S5P_PMUREG(0x0608)
#define S5P_INFORM0 S5P_PMUREG(0x0800)
#define S5P_INFORM1 S5P_PMUREG(0x0804)

85
arch/arm/mach-exynos/sleep.S Normal file
Просмотреть файл

@ -0,0 +1,85 @@
/*
* Copyright (c) 2013 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* Exynos low-level resume code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
#define CPU_MASK 0xff0ffff0
#define CPU_CORTEX_A9 0x410fc090
/*
* The following code is located into the .data section. This is to
* allow l2x0_regs_phys to be accessed with a relative load while we
* can't rely on any MMU translation. We could have put l2x0_regs_phys
* in the .text section as well, but some setups might insist on it to
* be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
*/
.data
.align
/*
* sleep magic, to allow the bootloader to check for an valid
* image to resume to. Must be the first word before the
* exynos_cpu_resume entry.
*/
.word 0x2bedf00d
/*
* exynos_cpu_resume
*
* resume code entry for bootloader to call
*/
ENTRY(exynos_cpu_resume)
#ifdef CONFIG_CACHE_L2X0
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK
and r0, r0, r1
ldr r1, =CPU_CORTEX_A9
cmp r0, r1
bne skip_l2_resume
adr r0, l2x0_regs_phys
ldr r0, [r0]
cmp r0, #0
beq skip_l2_resume
ldr r1, [r0, #L2X0_R_PHY_BASE]
ldr r2, [r1, #L2X0_CTRL]
tst r2, #0x1
bne skip_l2_resume
ldr r2, [r0, #L2X0_R_AUX_CTRL]
str r2, [r1, #L2X0_AUX_CTRL]
ldr r2, [r0, #L2X0_R_TAG_LATENCY]
str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
ldr r2, [r0, #L2X0_R_DATA_LATENCY]
str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
str r2, [r1, #L2X0_PREFETCH_CTRL]
ldr r2, [r0, #L2X0_R_PWR_CTRL]
str r2, [r1, #L2X0_POWER_CTRL]
mov r2, #1
str r2, [r1, #L2X0_CTRL]
skip_l2_resume:
#endif
b cpu_resume
ENDPROC(exynos_cpu_resume)
#ifdef CONFIG_CACHE_L2X0
.globl l2x0_regs_phys
l2x0_regs_phys:
.long 0
#endif

4
arch/arm/mach-integrator/core.c
Просмотреть файл

@ -25,13 +25,11 @@
#include <linux/of.h>
#include <linux/of_address.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/mach-types.h>
#include <asm/mach/time.h>
#include <asm/pgtable.h>
#include "hardware.h"
#include "cm.h"
#include "common.h"

110
arch/arm/mach-integrator/include/mach/platform.h → arch/arm/mach-integrator/hardware.h
Просмотреть файл

@ -1,4 +1,8 @@
/*
* This file contains the hardware definitions of the Integrator.
*
* Copyright (C) 1998-1999 ARM Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
@ -13,26 +17,28 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
/**************************************************************************
* * Copyright © ARM Limited 1998. All rights reserved.
* ***********************************************************************/
/* ************************************************************************
*
* Integrator address map
*
* ***********************************************************************/
#ifndef INTEGRATOR_HARDWARE_H
#define INTEGRATOR_HARDWARE_H
#ifndef __address_h
#define __address_h 1
/*
* Where in virtual memory the IO devices (timers, system controllers
* and so on)
*/
#define IO_BASE 0xF0000000 // VA of IO
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
/* ========================================================================
* Integrator definitions
* ========================================================================
* ------------------------------------------------------------------------
* Memory definitions
* ------------------------------------------------------------------------
/* macro to get at IO space when running virtually */
#ifdef CONFIG_MMU
#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
#else
#define IO_ADDRESS(x) (x)
#endif
#define __io_address(n) ((void __iomem *)IO_ADDRESS(n))
/*
* Integrator memory map
*
*/
#define INTEGRATOR_BOOT_ROM_LO 0x00000000
#define INTEGRATOR_BOOT_ROM_HI 0x20000000
@ -40,13 +46,13 @@
#define INTEGRATOR_BOOT_ROM_SIZE SZ_512K
/*
* New Core Modules have different amounts of SSRAM, the amount of SSRAM
* fitted can be found in HDR_STAT.
* New Core Modules have different amounts of SSRAM, the amount of SSRAM
* fitted can be found in HDR_STAT.
*
* The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
* the minimum amount of SSRAM fitted on any core module.
* The symbol INTEGRATOR_SSRAM_SIZE is kept, however this now refers to
* the minimum amount of SSRAM fitted on any core module.
*
* New Core Modules also alias the SSRAM.
* New Core Modules also alias the SSRAM.
*
*/
#define INTEGRATOR_SSRAM_BASE 0x00000000
@ -61,7 +67,6 @@
/*
* SDRAM is a SIMM therefore the size is not known.
*
*/
#define INTEGRATOR_SDRAM_BASE 0x00040000
@ -81,10 +86,8 @@
#define INTEGRATOR_LOGIC_MODULE2_BASE 0xE0000000
#define INTEGRATOR_LOGIC_MODULE3_BASE 0xF0000000
/* ------------------------------------------------------------------------
* Integrator header card registers
* ------------------------------------------------------------------------
*
/*
* Integrator header card registers
*/
#define INTEGRATOR_HDR_ID_OFFSET 0x00
#define INTEGRATOR_HDR_PROC_OFFSET 0x04
@ -173,16 +176,12 @@
#define INTEGRATOR_HDR_SDRAM_SPD_OK (1 << 5)
/* ------------------------------------------------------------------------
* Integrator system registers
* ------------------------------------------------------------------------
*
/*
* Integrator system registers
*/
/*
* System Controller
*
*/
#define INTEGRATOR_SC_ID_OFFSET 0x00
#define INTEGRATOR_SC_OSC_OFFSET 0x04
@ -223,7 +222,6 @@
/*
* External Bus Interface
*
*/
#define INTEGRATOR_EBI_BASE 0x12000000
@ -272,7 +270,6 @@
/*
* LED's & Switches
*
*/
#define INTEGRATOR_DBG_ALPHA_OFFSET 0x00
#define INTEGRATOR_DBG_LEDS_OFFSET 0x04
@ -292,32 +289,25 @@
#define INTEGRATOR_CP_SIC_BASE 0xCA000000 /* SIC */
#define INTEGRATOR_CP_CTL_BASE 0xCB000000 /* CP system control */
/* ------------------------------------------------------------------------
* KMI keyboard/mouse definitions
* ------------------------------------------------------------------------
*/
/* PS2 Keyboard interface */
#define KMI0_BASE INTEGRATOR_KBD_BASE
/* PS2 Mouse interface */
#define KMI1_BASE INTEGRATOR_MOUSE_BASE
/* KMI definitions are now in include/asm-arm/hardware/amba_kmi.h -- rmk */
/* ------------------------------------------------------------------------
* Integrator Interrupt Controllers
* ------------------------------------------------------------------------
/*
* Integrator Interrupt Controllers
*
* Offsets from interrupt controller base
*
* System Controller interrupt controller base is
* Offsets from interrupt controller base
*
* System Controller interrupt controller base is
*
* INTEGRATOR_IC_BASE + (header_number << 6)
*
* Core Module interrupt controller base is
* Core Module interrupt controller base is
*
* INTEGRATOR_HDR_IC
*
*/
#define IRQ_STATUS 0
#define IRQ_RAW_STATUS 0x04
@ -335,25 +325,8 @@
#define FIQ_ENABLE_CLEAR 0x2C
/* ------------------------------------------------------------------------
* Interrupts
* ------------------------------------------------------------------------
*
*
* Each Core Module has two interrupts controllers, one on the core module
* itself and one in the system controller on the motherboard. The
* READ_INT macro in target.s reads both interrupt controllers and returns
* a 32 bit bitmask, bits 0 to 23 are interrupts from the system controller
* and bits 24 to 31 are from the core module.
*
* The following definitions relate to the bitmask returned by READ_INT.
*
*/
/* ------------------------------------------------------------------------
* LED's
* ------------------------------------------------------------------------
*
/*
* LED's
*/
#define GREEN_LED 0x01
#define YELLOW_LED 0x02
@ -371,7 +344,6 @@
*
* Timer 0 runs at bus frequency
*/
#define INTEGRATOR_TIMER0_BASE INTEGRATOR_CT_BASE
#define INTEGRATOR_TIMER1_BASE (INTEGRATOR_CT_BASE + 0x100)
#define INTEGRATOR_TIMER2_BASE (INTEGRATOR_CT_BASE + 0x200)
@ -379,4 +351,4 @@
#define INTEGRATOR_CSR_BASE 0x10000000
#define INTEGRATOR_CSR_SIZE 0x10000000
#endif
#endif /* INTEGRATOR_HARDWARE_H */

4
arch/arm/mach-integrator/impd1.c
Просмотреть файл

@ -25,9 +25,9 @@
#include <linux/slab.h>
#include <linux/irqchip/arm-vic.h>
#include <mach/lm.h>
#include <mach/impd1.h>
#include <asm/sizes.h>
#include "lm.h"
#include "impd1.h"
static int module_id;

4
arch/arm/mach-integrator/include/mach/impd1.h → arch/arm/mach-integrator/impd1.h
Просмотреть файл

@ -1,6 +1,3 @@
#define IMPD1_OSC1 0x00
#define IMPD1_OSC2 0x04
#define IMPD1_LOCK 0x08
#define IMPD1_LEDS 0x0c
#define IMPD1_INT 0x10
#define IMPD1_SW 0x14
@ -15,4 +12,3 @@
struct device;
void impd1_tweak_control(struct device *dev, u32 mask, u32 val);

45
arch/arm/mach-integrator/include/mach/hardware.h
Просмотреть файл

@ -1,45 +0,0 @@
/*
* arch/arm/mach-integrator/include/mach/hardware.h
*
* This file contains the hardware definitions of the Integrator.
*
* Copyright (C) 1999 ARM Limited.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef __ASM_ARCH_HARDWARE_H
#define __ASM_ARCH_HARDWARE_H
#include <asm/sizes.h>
/*
* Where in virtual memory the IO devices (timers, system controllers
* and so on)
*/
#define IO_BASE 0xF0000000 // VA of IO
#define IO_SIZE 0x0B000000 // How much?
#define IO_START INTEGRATOR_HDR_BASE // PA of IO
/* macro to get at IO space when running virtually */
#ifdef CONFIG_MMU
#define IO_ADDRESS(x) (((x) & 0x000fffff) | (((x) >> 4) & 0x0ff00000) | IO_BASE)
#else
#define IO_ADDRESS(x) (x)
#endif
#define __io_address(n) ((void __iomem *)IO_ADDRESS(n))
#endif

6
arch/arm/mach-integrator/integrator_ap.c
Просмотреть файл

@ -44,23 +44,21 @@
#include <linux/sched_clock.h>
#include <linux/clk-provider.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/hardware/arm_timer.h>
#include <asm/setup.h>
#include <asm/param.h> /* HZ */
#include <asm/mach-types.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include "hardware.h"
#include "cm.h"
#include "common.h"
#include "pci_v3.h"
#include "lm.h"
/* Base address to the AP system controller */
void __iomem *ap_syscon_base;

17
arch/arm/mach-integrator/integrator_cp.c
Просмотреть файл

@ -27,22 +27,18 @@
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <linux/sys_soc.h>
#include <linux/sched_clock.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
#include <mach/lm.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <plat/clcd.h>
#include <plat/sched_clock.h>
#include "hardware.h"
#include "cm.h"
#include "common.h"
@ -229,11 +225,14 @@ static struct clcd_board clcd_data = {
#define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28)
static u64 notrace intcp_read_sched_clock(void)
{
return readl(REFCOUNTER);
}
static void __init intcp_init_early(void)
{
#ifdef CONFIG_PLAT_VERSATILE_SCHED_CLOCK
versatile_sched_clock_init(REFCOUNTER, 24000000);
#endif
sched_clock_register(intcp_read_sched_clock, 32, 24000000);
}
static const struct of_device_id fpga_irq_of_match[] __initconst = {

4
arch/arm/mach-integrator/leds.c
Просмотреть файл

@ -11,9 +11,7 @@
#include <linux/slab.h>
#include <linux/leds.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include "hardware.h"
#include "cm.h"
#if defined(CONFIG_NEW_LEDS) && defined(CONFIG_LEDS_CLASS)

2
arch/arm/mach-integrator/lm.c
Просмотреть файл

@ -12,7 +12,7 @@
#include <linux/device.h>
#include <linux/slab.h>
#include <mach/lm.h>
#include "lm.h"
#define to_lm_device(d) container_of(d, struct lm_device, dev)
#define to_lm_driver(d) container_of(d, struct lm_driver, drv)

0
arch/arm/mach-integrator/include/mach/lm.h → arch/arm/mach-integrator/lm.h
Просмотреть файл

4
arch/arm/mach-integrator/pci_v3.c
Просмотреть файл

@ -34,15 +34,13 @@
#include <linux/of_pci.h>
#include <video/vga.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <asm/mach/map.h>
#include <asm/signal.h>
#include <asm/mach/pci.h>
#include <asm/irq_regs.h>
#include "pci_v3.h"
#include "hardware.h"
/*
* Where in the memory map does PCI live?

14
arch/arm/mach-s3c24xx/include/mach/hardware.h
Просмотреть файл

@ -1,5 +1,4 @@
/* arch/arm/mach-s3c2410/include/mach/hardware.h
*
/*
* Copyright (c) 2003 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
*
@ -17,20 +16,9 @@
extern unsigned int s3c2410_modify_misccr(unsigned int clr, unsigned int chg);
#ifdef CONFIG_CPU_S3C2440
extern int s3c2440_set_dsc(unsigned int pin, unsigned int value);
#endif /* CONFIG_CPU_S3C2440 */
#endif /* __ASSEMBLY__ */
#include <asm/sizes.h>
#include <mach/map.h>
/* machine specific hardware definitions should go after this */
/* currently here until moved into config (todo) */
#define CONFIG_NO_MULTIWORD_IO
#endif /* __ASM_ARCH_HARDWARE_H */

57
arch/arm/mach-s3c24xx/include/mach/uncompress.h
Просмотреть файл

@ -1,57 +0,0 @@
/* arch/arm/mach-s3c2410/include/mach/uncompress.h
*
* Copyright (c) 2003-2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C2410 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/regs-gpio.h>
#include <mach/map.h>
/* working in physical space... */
#undef S3C2410_GPIOREG
#define S3C2410_GPIOREG(x) ((S3C24XX_PA_GPIO + (x)))
#include <plat/uncompress.h>
static inline int is_arm926(void)
{
unsigned int cpuid;
asm volatile ("mrc p15, 0, %0, c1, c0, 0" : "=r" (cpuid));
return ((cpuid & 0xff0) == 0x260);
}
static void arch_detect_cpu(void)
{
unsigned int cpuid;
cpuid = *((volatile unsigned int *)S3C2410_GSTATUS1);
cpuid &= S3C2410_GSTATUS1_IDMASK;
if (is_arm926() || cpuid == S3C2410_GSTATUS1_2440 ||
cpuid == S3C2410_GSTATUS1_2442 ||
cpuid == S3C2410_GSTATUS1_2416 ||
cpuid == S3C2410_GSTATUS1_2450) {
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
} else {
fifo_mask = S3C2410_UFSTAT_TXMASK;
fifo_max = 15 << S3C2410_UFSTAT_TXSHIFT;
}
uart_base = (volatile u8 *) S3C_PA_UART +
(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */

2
arch/arm/mach-s3c64xx/include/mach/pm-core.h
Просмотреть файл

@ -15,6 +15,8 @@
#ifndef __MACH_S3C64XX_PM_CORE_H
#define __MACH_S3C64XX_PM_CORE_H __FILE__
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)

31
arch/arm/mach-s3c64xx/include/mach/uncompress.h
Просмотреть файл

@ -1,31 +0,0 @@
/* arch/arm/mach-s3c6400/include/mach/uncompress.h
*
* Copyright 2008 Openmoko, Inc.
* Copyright 2008 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C6400 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
/* we do not need to do any cpu detection here at the moment. */
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
uart_base = (volatile u8 *)S3C_PA_UART +
(S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT);
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */

1
arch/arm/mach-s3c64xx/pm.c
Просмотреть файл

@ -332,7 +332,6 @@ static __init int s3c64xx_pm_initcall(void)
{
pm_cpu_prep = s3c64xx_pm_prepare;
pm_cpu_sleep = s3c64xx_cpu_suspend;
pm_uart_udivslot = 1;
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
gpio_request(S3C64XX_GPN(12), "DEBUG_LED0");

2
arch/arm/mach-s5p64x0/include/mach/pm-core.h
Просмотреть файл

@ -12,6 +12,8 @@
* published by the Free Software Foundation.
*/
#include <linux/serial_s3c.h>
#include <mach/regs-gpio.h>
static inline void s3c_pm_debug_init_uart(void)

34
arch/arm/mach-s5p64x0/include/mach/uncompress.h
Просмотреть файл

@ -1,34 +0,0 @@
/* linux/arch/arm/mach-s5p64x0/include/mach/uncompress.h
*
* Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com
*
* S5P64X0 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
unsigned int chipid;
chipid = *(const volatile unsigned int __force *) 0xE0100118;
if ((chipid & 0xff000) == 0x50000)
uart_base = (volatile u8 *)S5P6450_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
else
uart_base = (volatile u8 *)S5P6440_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */

1
arch/arm/mach-s5p64x0/pm.c
Просмотреть файл

@ -161,7 +161,6 @@ static int s5p64x0_pm_add(struct device *dev, struct subsys_interface *sif)
{
pm_cpu_prep = s5p64x0_pm_prepare;
pm_cpu_sleep = s5p64x0_cpu_suspend;
pm_uart_udivslot = 1;
return 0;
}

30
arch/arm/mach-s5pc100/include/mach/uncompress.h
Просмотреть файл

@ -1,30 +0,0 @@
/* arch/arm/mach-s5pc100/include/mach/uncompress.h
*
* Copyright 2009 Samsung Electronics Co.
* Byungho Min <bhmin@samsung.com>
*
* S5PC100 - uncompress code
*
* Based on mach-s3c6400/include/mach/uncompress.h
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
/* we do not need to do any cpu detection here at the moment. */
fifo_mask = S3C2440_UFSTAT_TXMASK;
fifo_max = 63 << S3C2440_UFSTAT_TXSHIFT;
uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */

28
arch/arm/mach-s5pv210/include/mach/uncompress.h
Просмотреть файл

@ -1,28 +0,0 @@
/* linux/arch/arm/mach-s5pv210/include/mach/uncompress.h
*
* Copyright (c) 2010 Samsung Electronics Co., Ltd.
* http://www.samsung.com/
*
* S5PV210 - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_ARCH_UNCOMPRESS_H
#define __ASM_ARCH_UNCOMPRESS_H
#include <mach/map.h>
#include <plat/uncompress.h>
static void arch_detect_cpu(void)
{
/* we do not need to do any cpu detection here at the moment. */
fifo_mask = S5PV210_UFSTAT_TXMASK;
fifo_max = 63 << S5PV210_UFSTAT_TXSHIFT;
uart_base = (volatile u8 *)S5P_PA_UART(CONFIG_S3C_LOWLEVEL_UART_PORT);
}
#endif /* __ASM_ARCH_UNCOMPRESS_H */

1
arch/arm/mach-zynq/Kconfig
Просмотреть файл

@ -9,5 +9,6 @@ config ARCH_ZYNQ
select ICST
select CADENCE_TTC_TIMER
select ARM_GLOBAL_TIMER if !CPU_FREQ
select MFD_SYSCON
help
Support for Xilinx Zynq ARM Cortex A9 Platform

8
arch/arm/mach-zynq/common.c
Просмотреть файл

@ -19,6 +19,7 @@
#include <linux/cpumask.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
#include <linux/clk-provider.h>
#include <linux/clk/zynq.h>
#include <linux/clocksource.h>
#include <linux/of_address.h>
@ -75,11 +76,16 @@ static void __init zynq_init_machine(void)
platform_device_register(&zynq_cpuidle_device);
platform_device_register_full(&devinfo);
zynq_slcr_init();
}
static void __init zynq_timer_init(void)
{
zynq_slcr_init();
zynq_early_slcr_init();
zynq_clock_init();
of_clk_init(NULL);
clocksource_of_init();
}

2
arch/arm/mach-zynq/common.h
Просмотреть файл

@ -20,6 +20,7 @@
void zynq_secondary_startup(void);
extern int zynq_slcr_init(void);
extern int zynq_early_slcr_init(void);
extern void zynq_slcr_system_reset(void);
extern void zynq_slcr_cpu_stop(int cpu);
extern void zynq_slcr_cpu_start(int cpu);
@ -33,7 +34,6 @@ extern int zynq_cpun_start(u32 address, int cpu);
extern struct smp_operations zynq_smp_ops __initdata;
#endif
extern void __iomem *zynq_slcr_base;
extern void __iomem *zynq_scu_base;
/* Hotplug */

104
arch/arm/mach-zynq/slcr.c
Просмотреть файл

@ -15,7 +15,9 @@
*/
#include <linux/io.h>
#include <linux/mfd/syscon.h>
#include <linux/of_address.h>
#include <linux/regmap.h>
#include <linux/clk/zynq.h>
#include "common.h"
@ -29,7 +31,56 @@
#define SLCR_A9_CPU_CLKSTOP 0x10
#define SLCR_A9_CPU_RST 0x1
void __iomem *zynq_slcr_base;
static void __iomem *zynq_slcr_base;
static struct regmap *zynq_slcr_regmap;
/**
* zynq_slcr_write - Write to a register in SLCR block
*
* @val: Value to write to the register
* @offset: Register offset in SLCR block
*
* Return: a negative value on error, 0 on success
*/
static int zynq_slcr_write(u32 val, u32 offset)
{
if (!zynq_slcr_regmap) {
writel(val, zynq_slcr_base + offset);
return 0;
}
return regmap_write(zynq_slcr_regmap, offset, val);
}
/**
* zynq_slcr_read - Read a register in SLCR block
*
* @val: Pointer to value to be read from SLCR
* @offset: Register offset in SLCR block
*
* Return: a negative value on error, 0 on success
*/
static int zynq_slcr_read(u32 *val, u32 offset)
{
if (zynq_slcr_regmap)
return regmap_read(zynq_slcr_regmap, offset, val);
*val = readl(zynq_slcr_base + offset);
return 0;
}
/**
* zynq_slcr_unlock - Unlock SLCR registers
*
* Return: a negative value on error, 0 on success
*/
static inline int zynq_slcr_unlock(void)
{
zynq_slcr_write(SLCR_UNLOCK_MAGIC, SLCR_UNLOCK_OFFSET);
return 0;
}
/**
* zynq_slcr_system_reset - Reset the entire system.
@ -43,16 +94,16 @@ void zynq_slcr_system_reset(void)
* Note that this seems to require raw i/o
* functions or there's a lockup?
*/
writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
zynq_slcr_unlock();
/*
* Clear 0x0F000000 bits of reboot status register to workaround
* the FSBL not loading the bitstream after soft-reboot
* This is a temporary solution until we know more.
*/
reboot = readl(zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
writel(reboot & 0xF0FFFFFF, zynq_slcr_base + SLCR_REBOOT_STATUS_OFFSET);
writel(1, zynq_slcr_base + SLCR_PS_RST_CTRL_OFFSET);
zynq_slcr_read(&reboot, SLCR_REBOOT_STATUS_OFFSET);
zynq_slcr_write(reboot & 0xF0FFFFFF, SLCR_REBOOT_STATUS_OFFSET);
zynq_slcr_write(1, SLCR_PS_RST_CTRL_OFFSET);
}
/**
@ -61,11 +112,13 @@ void zynq_slcr_system_reset(void)
*/
void zynq_slcr_cpu_start(int cpu)
{
u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
u32 reg;
zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg &= ~(SLCR_A9_CPU_RST << cpu);
writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg &= ~(SLCR_A9_CPU_CLKSTOP << cpu);
writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
}
/**
@ -74,18 +127,39 @@ void zynq_slcr_cpu_start(int cpu)
*/
void zynq_slcr_cpu_stop(int cpu)
{
u32 reg = readl(zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
u32 reg;
zynq_slcr_read(&reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
reg |= (SLCR_A9_CPU_CLKSTOP | SLCR_A9_CPU_RST) << cpu;
writel(reg, zynq_slcr_base + SLCR_A9_CPU_RST_CTRL_OFFSET);
zynq_slcr_write(reg, SLCR_A9_CPU_RST_CTRL_OFFSET);
}
/**
* zynq_slcr_init
* Returns 0 on success, negative errno otherwise.
* zynq_slcr_init - Regular slcr driver init
*
* Return: 0 on success, negative errno otherwise.
*
* Called early during boot from platform code to remap SLCR area.
*/
int __init zynq_slcr_init(void)
{
zynq_slcr_regmap = syscon_regmap_lookup_by_compatible("xlnx,zynq-slcr");
if (IS_ERR(zynq_slcr_regmap)) {
pr_err("%s: failed to find zynq-slcr\n", __func__);
return -ENODEV;
}
return 0;
}
/**
* zynq_early_slcr_init - Early slcr init function
*
* Return: 0 on success, negative errno otherwise.
*
* Called very early during boot from platform code to unlock SLCR.
*/
int __init zynq_early_slcr_init(void)
{
struct device_node *np;
@ -101,13 +175,13 @@ int __init zynq_slcr_init(void)
BUG();
}
np->data = (__force void *)zynq_slcr_base;
/* unlock the SLCR so that registers can be changed */
writel(SLCR_UNLOCK_MAGIC, zynq_slcr_base + SLCR_UNLOCK_OFFSET);
zynq_slcr_unlock();
pr_info("%s mapped to %p\n", np->name, zynq_slcr_base);
zynq_clock_init(zynq_slcr_base);
of_node_put(np);
return 0;

2
arch/arm/plat-samsung/Makefile
Просмотреть файл

@ -47,9 +47,11 @@ obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o
# PM support
obj-$(CONFIG_PM_SLEEP) += pm-common.o
obj-$(CONFIG_SAMSUNG_PM) += pm.o
obj-$(CONFIG_SAMSUNG_PM_GPIO) += pm-gpio.o
obj-$(CONFIG_SAMSUNG_PM_CHECK) += pm-check.o
obj-$(CONFIG_SAMSUNG_PM_DEBUG) += pm-debug.o
obj-$(CONFIG_SAMSUNG_WAKEMASK) += wakeup-mask.o
obj-$(CONFIG_SAMSUNG_WDT_RESET) += watchdog-reset.o

1
arch/arm/plat-samsung/clock.c
Просмотреть файл

@ -43,7 +43,6 @@
#include <linux/debugfs.h>
#endif
#include <mach/hardware.h>
#include <asm/irq.h>
#include <plat/cpu-freq.h>

2
arch/arm/plat-samsung/devs.c
Просмотреть файл

@ -31,6 +31,7 @@
#include <linux/mtd/partitions.h>
#include <linux/mmc/host.h>
#include <linux/ioport.h>
#include <linux/sizes.h>
#include <linux/platform_data/s3c-hsudc.h>
#include <linux/platform_data/s3c-hsotg.h>
#include <linux/platform_data/dma-s3c24xx.h>
@ -42,7 +43,6 @@
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/dma.h>
#include <mach/irqs.h>
#include <mach/map.h>

10
arch/arm/plat-samsung/include/plat/cpu.h
Просмотреть файл

@ -20,6 +20,9 @@
extern unsigned long samsung_cpu_id;
#define S3C2410_CPU_ID 0x32410000
#define S3C2410_CPU_MASK 0xFFFFFFFF
#define S3C24XX_CPU_ID 0x32400000
#define S3C24XX_CPU_MASK 0xFFF00000
@ -56,6 +59,7 @@ static inline int is_samsung_##name(void) \
return ((samsung_cpu_id & mask) == (id & mask)); \
}
IS_SAMSUNG_CPU(s3c2410, S3C2410_CPU_ID, S3C2410_CPU_MASK)
IS_SAMSUNG_CPU(s3c24xx, S3C24XX_CPU_ID, S3C24XX_CPU_MASK)
IS_SAMSUNG_CPU(s3c2412, S3C2412_CPU_ID, S3C2412_CPU_MASK)
IS_SAMSUNG_CPU(s3c6400, S3C6400_CPU_ID, S3C64XX_CPU_MASK)
@ -76,8 +80,10 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
defined(CONFIG_CPU_S3C2442) || defined(CONFIG_CPU_S3C244X) || \
defined(CONFIG_CPU_S3C2443)
# define soc_is_s3c24xx() is_samsung_s3c24xx()
# define soc_is_s3c2410() is_samsung_s3c2410()
#else
# define soc_is_s3c24xx() 0
# define soc_is_s3c2410() 0
#endif
#if defined(CONFIG_CPU_S3C2412)
@ -160,6 +166,10 @@ IS_SAMSUNG_CPU(exynos5440, EXYNOS5440_SOC_ID, EXYNOS5_SOC_MASK)
# define soc_is_exynos5440() 0
#endif
#define soc_is_exynos4() (soc_is_exynos4210() || soc_is_exynos4212() || \
soc_is_exynos4412())
#define soc_is_exynos5() (soc_is_exynos5250() || soc_is_exynos5420())
#define IODESC_ENT(x) { (unsigned long)S3C24XX_VA_##x, __phys_to_pfn(S3C24XX_PA_##x), S3C24XX_SZ_##x, MT_DEVICE }
#ifndef KHZ

3
arch/arm/plat-samsung/include/plat/mfc.h
Просмотреть файл

@ -32,7 +32,4 @@ struct s5p_mfc_dt_meminfo {
void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize,
phys_addr_t lbase, unsigned int lsize);
int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
int depth, void *data);
#endif /* __PLAT_SAMSUNG_MFC_H */

110
arch/arm/plat-samsung/include/plat/pm-common.h Normal file
Просмотреть файл

@ -0,0 +1,110 @@
/*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Tomasz Figa <t.figa@samsung.com>
* Copyright (c) 2004 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Written by Ben Dooks, <ben@simtec.co.uk>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __PLAT_SAMSUNG_PM_COMMON_H
#define __PLAT_SAMSUNG_PM_COMMON_H __FILE__
#include <linux/irq.h>
/* sleep save info */
/**
* struct sleep_save - save information for shared peripherals.
* @reg: Pointer to the register to save.
* @val: Holder for the value saved from reg.
*
* This describes a list of registers which is used by the pm core and
* other subsystem to save and restore register values over suspend.
*/
struct sleep_save {
void __iomem *reg;
unsigned long val;
};
#define SAVE_ITEM(x) \
{ .reg = (x) }
/* helper functions to save/restore lists of registers. */
extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
/* PM debug functions */
/**
* struct pm_uart_save - save block for core UART
* @ulcon: Save value for S3C2410_ULCON
* @ucon: Save value for S3C2410_UCON
* @ufcon: Save value for S3C2410_UFCON
* @umcon: Save value for S3C2410_UMCON
* @ubrdiv: Save value for S3C2410_UBRDIV
*
* Save block for UART registers to be held over sleep and restored if they
* are needed (say by debug).
*/
struct pm_uart_save {
u32 ulcon;
u32 ucon;
u32 ufcon;
u32 umcon;
u32 ubrdiv;
u32 udivslot;
};
#ifdef CONFIG_SAMSUNG_PM_DEBUG
/**
* s3c_pm_dbg() - low level debug function for use in suspend/resume.
* @msg: The message to print.
*
* This function is used mainly to debug the resume process before the system
* can rely on printk/console output. It uses the low-level debugging output
* routine printascii() to do its work.
*/
extern void s3c_pm_dbg(const char *msg, ...);
/**
* s3c_pm_debug_init() - suspend/resume low level debug initialization.
* @base: Virtual base of UART to use for suspend/resume debugging.
*
* This function needs to be called before S3C_PMDBG() can be used, to set up
* UART port base address and configuration.
*/
extern void s3c_pm_debug_init(void);
#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
extern void s3c_pm_save_uarts(void);
extern void s3c_pm_restore_uarts(void);
#else
#define S3C_PMDBG(fmt...) pr_debug(fmt)
#define s3c_pm_debug_init() do { } while (0)
static inline void s3c_pm_save_uarts(void) { }
static inline void s3c_pm_restore_uarts(void) { }
#endif
/* suspend memory checking */
#ifdef CONFIG_SAMSUNG_PM_CHECK
extern void s3c_pm_check_prepare(void);
extern void s3c_pm_check_restore(void);
extern void s3c_pm_check_cleanup(void);
extern void s3c_pm_check_store(void);
#else
#define s3c_pm_check_prepare() do { } while (0)
#define s3c_pm_check_restore() do { } while (0)
#define s3c_pm_check_cleanup() do { } while (0)
#define s3c_pm_check_store() do { } while (0)
#endif
#endif

80
arch/arm/plat-samsung/include/plat/pm.h
Просмотреть файл

@ -15,7 +15,7 @@
* management
*/
#include <linux/irq.h>
#include <plat/pm-common.h>
struct device;
@ -54,56 +54,10 @@ extern int (*pm_cpu_sleep)(unsigned long);
extern unsigned long s3c_pm_flags;
extern unsigned char pm_uart_udivslot; /* true to save UART UDIVSLOT */
/* from sleep.S */
extern int s3c2410_cpu_suspend(unsigned long);
/* sleep save info */
/**
* struct sleep_save - save information for shared peripherals.
* @reg: Pointer to the register to save.
* @val: Holder for the value saved from reg.
*
* This describes a list of registers which is used by the pm core and
* other subsystem to save and restore register values over suspend.
*/
struct sleep_save {
void __iomem *reg;
unsigned long val;
};
#define SAVE_ITEM(x) \
{ .reg = (x) }
/**
* struct pm_uart_save - save block for core UART
* @ulcon: Save value for S3C2410_ULCON
* @ucon: Save value for S3C2410_UCON
* @ufcon: Save value for S3C2410_UFCON
* @umcon: Save value for S3C2410_UMCON
* @ubrdiv: Save value for S3C2410_UBRDIV
*
* Save block for UART registers to be held over sleep and restored if they
* are needed (say by debug).
*/
struct pm_uart_save {
u32 ulcon;
u32 ucon;
u32 ufcon;
u32 umcon;
u32 ubrdiv;
u32 udivslot;
};
/* helper functions to save/restore lists of registers. */
extern void s3c_pm_do_save(struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore(const struct sleep_save *ptr, int count);
extern void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count);
#ifdef CONFIG_SAMSUNG_PM
extern int s3c_irq_wake(struct irq_data *data, unsigned int state);
extern int s3c_irqext_wake(struct irq_data *data, unsigned int state);
@ -114,24 +68,6 @@ extern void s3c_cpu_resume(void);
#define s3c_cpu_resume NULL
#endif
/* PM debug functions */
#ifdef CONFIG_SAMSUNG_PM_DEBUG
/**
* s3c_pm_dbg() - low level debug function for use in suspend/resume.
* @msg: The message to print.
*
* This function is used mainly to debug the resume process before the system
* can rely on printk/console output. It uses the low-level debugging output
* routine printascii() to do its work.
*/
extern void s3c_pm_dbg(const char *msg, ...);
#define S3C_PMDBG(fmt...) s3c_pm_dbg(fmt)
#else
#define S3C_PMDBG(fmt...) printk(KERN_DEBUG fmt)
#endif
#ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK
/**
* s3c_pm_debug_smdkled() - Debug PM suspend/resume via SMDK Board LEDs
@ -144,20 +80,6 @@ extern void s3c_pm_debug_smdkled(u32 set, u32 clear);
static inline void s3c_pm_debug_smdkled(u32 set, u32 clear) { }
#endif /* CONFIG_S3C_PM_DEBUG_LED_SMDK */
/* suspend memory checking */
#ifdef CONFIG_SAMSUNG_PM_CHECK
extern void s3c_pm_check_prepare(void);
extern void s3c_pm_check_restore(void);
extern void s3c_pm_check_cleanup(void);
extern void s3c_pm_check_store(void);
#else
#define s3c_pm_check_prepare() do { } while(0)
#define s3c_pm_check_restore() do { } while(0)
#define s3c_pm_check_cleanup() do { } while(0)
#define s3c_pm_check_store() do { } while(0)
#endif
/**
* s3c_pm_configure_extint() - ensure pins are correctly set for IRQ
*

175
arch/arm/plat-samsung/include/plat/uncompress.h
Просмотреть файл

@ -1,175 +0,0 @@
/* arch/arm/plat-samsung/include/plat/uncompress.h
*
* Copyright 2003, 2007 Simtec Electronics
* http://armlinux.simtec.co.uk/
* Ben Dooks <ben@simtec.co.uk>
*
* S3C - uncompress code
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ASM_PLAT_UNCOMPRESS_H
#define __ASM_PLAT_UNCOMPRESS_H
typedef unsigned int upf_t; /* cannot include linux/serial_core.h */
/* uart setup */
unsigned int fifo_mask;
unsigned int fifo_max;
volatile u8 *uart_base;
/* forward declerations */
static void arch_detect_cpu(void);
/* defines for UART registers */
#include <linux/serial_s3c.h>
/* working in physical space... */
#define S3C_WDOGREG(x) ((S3C_PA_WDT + (x)))
#define S3C2410_WTCON S3C_WDOGREG(0x00)
#define S3C2410_WTDAT S3C_WDOGREG(0x04)
#define S3C2410_WTCNT S3C_WDOGREG(0x08)
#define S3C2410_WTCON_RSTEN (1 << 0)
#define S3C2410_WTCON_ENABLE (1 << 5)
#define S3C2410_WTCON_DIV128 (3 << 3)
#define S3C2410_WTCON_PRESCALE(x) ((x) << 8)
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
static __inline__ void
uart_wr(unsigned int reg, unsigned int val)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
*ptr = val;
}
static __inline__ unsigned int
uart_rd(unsigned int reg)
{
volatile unsigned int *ptr;
ptr = (volatile unsigned int *)(reg + uart_base);
return *ptr;
}
/* we can deal with the case the UARTs are being run
* in FIFO mode, so that we don't hold up our execution
* waiting for tx to happen...
*/
static void putc(int ch)
{
if (!config_enabled(CONFIG_DEBUG_LL))
return;
if (uart_rd(S3C2410_UFCON) & S3C2410_UFCON_FIFOMODE) {
int level;
while (1) {
level = uart_rd(S3C2410_UFSTAT);
level &= fifo_mask;
if (level < fifo_max)
break;
}
} else {
/* not using fifos */
while ((uart_rd(S3C2410_UTRSTAT) & S3C2410_UTRSTAT_TXE) != S3C2410_UTRSTAT_TXE)
barrier();
}
/* write byte to transmission register */
uart_wr(S3C2410_UTXH, ch);
}
static inline void flush(void)
{
}
#define __raw_writel(d, ad) \
do { \
*((volatile unsigned int __force *)(ad)) = (d); \
} while (0)
#ifdef CONFIG_S3C_BOOT_ERROR_RESET
static void arch_decomp_error(const char *x)
{
putstr("\n\n");
putstr(x);
putstr("\n\n -- System resetting\n");
__raw_writel(0x4000, S3C2410_WTDAT);
__raw_writel(0x4000, S3C2410_WTCNT);
__raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON);
while(1);
}
#define arch_error arch_decomp_error
#endif
#ifdef CONFIG_S3C_BOOT_UART_FORCE_FIFO
static inline void arch_enable_uart_fifo(void)
{
u32 fifocon;
if (!config_enabled(CONFIG_DEBUG_LL))
return;
fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_FIFOMODE)) {
fifocon |= S3C2410_UFCON_RESETBOTH;
uart_wr(S3C2410_UFCON, fifocon);
/* wait for fifo reset to complete */
while (1) {
fifocon = uart_rd(S3C2410_UFCON);
if (!(fifocon & S3C2410_UFCON_RESETBOTH))
break;
}
uart_wr(S3C2410_UFCON, S3C2410_UFCON_FIFOMODE);
}
}
#else
#define arch_enable_uart_fifo() do { } while(0)
#endif
static void
arch_decomp_setup(void)
{
/* we may need to setup the uart(s) here if we are not running
* on an BAST... the BAST will have left the uarts configured
* after calling linux.
*/
arch_detect_cpu();
/* Enable the UART FIFOs if they where not enabled and our
* configuration says we should turn them on.
*/
arch_enable_uart_fifo();
}
#endif /* __ASM_PLAT_UNCOMPRESS_H */

2
arch/arm/plat-samsung/init.c
Просмотреть файл

@ -25,8 +25,6 @@
#include <linux/platform_device.h>
#include <linux/of.h>
#include <mach/hardware.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>

2
arch/arm/plat-samsung/pm-check.c
Просмотреть файл

@ -19,7 +19,7 @@
#include <linux/ioport.h>
#include <linux/slab.h>
#include <plat/pm.h>
#include <plat/pm-common.h>
#if CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE < 1
#error CONFIG_SAMSUNG_PM_CHECK_CHUNKSIZE must be a positive non-zero value

75
arch/arm/plat-samsung/pm-common.c Normal file
Просмотреть файл

@ -0,0 +1,75 @@
/*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Tomasz Figa <t.figa@samsung.com>
* Copyright (C) 2008 Openmoko, Inc.
* Copyright (C) 2004-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung common power management helper functions.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/io.h>
#include <linux/kernel.h>
#include <plat/pm-common.h>
/* helper functions to save and restore register state */
/**
* s3c_pm_do_save() - save a set of registers for restoration on resume.
* @ptr: Pointer to an array of registers.
* @count: Size of the ptr array.
*
* Run through the list of registers given, saving their contents in the
* array for later restoration when we wakeup.
*/
void s3c_pm_do_save(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
ptr->val = __raw_readl(ptr->reg);
S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
}
}
/**
* s3c_pm_do_restore() - restore register values from the save list.
* @ptr: Pointer to an array of registers.
* @count: Size of the ptr array.
*
* Restore the register values saved from s3c_pm_do_save().
*
* Note, we do not use S3C_PMDBG() in here, as the system may not have
* restore the UARTs state yet
*/
void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
pr_debug("restore %p (restore %08lx, was %08x)\n",
ptr->reg, ptr->val, __raw_readl(ptr->reg));
__raw_writel(ptr->val, ptr->reg);
}
}
/**
* s3c_pm_do_restore_core() - early restore register values from save list.
*
* This is similar to s3c_pm_do_restore() except we try and minimise the
* side effects of the function in case registers that hardware might need
* to work has been restored.
*
* WARNING: Do not put any debug in here that may effect memory or use
* peripherals, as things may be changing!
*/
void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++)
__raw_writel(ptr->val, ptr->reg);
}

97
arch/arm/plat-samsung/pm-debug.c Normal file
Просмотреть файл

@ -0,0 +1,97 @@
/*
* Copyright (C) 2013 Samsung Electronics Co., Ltd.
* Tomasz Figa <t.figa@samsung.com>
* Copyright (C) 2008 Openmoko, Inc.
* Copyright (C) 2004-2008 Simtec Electronics
* Ben Dooks <ben@simtec.co.uk>
* http://armlinux.simtec.co.uk/
*
* Samsung common power management (suspend to RAM) debug support
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/serial_core.h>
#include <linux/io.h>
#include <asm/mach/map.h>
#include <plat/cpu.h>
#include <plat/pm-common.h>
#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/pm-core.h>
#else
static inline void s3c_pm_debug_init_uart(void) {}
static inline void s3c_pm_arch_update_uart(void __iomem *regs,
struct pm_uart_save *save) {}
#endif
static struct pm_uart_save uart_save;
extern void printascii(const char *);
void s3c_pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
va_start(va, fmt);
vsnprintf(buff, sizeof(buff), fmt, va);
va_end(va);
printascii(buff);
}
void s3c_pm_debug_init(void)
{
/* restart uart clocks so we can use them to output */
s3c_pm_debug_init_uart();
}
static inline void __iomem *s3c_pm_uart_base(void)
{
unsigned long paddr;
unsigned long vaddr;
debug_ll_addr(&paddr, &vaddr);
return (void __iomem *)vaddr;
}
void s3c_pm_save_uarts(void)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
save->ulcon = __raw_readl(regs + S3C2410_ULCON);
save->ucon = __raw_readl(regs + S3C2410_UCON);
save->ufcon = __raw_readl(regs + S3C2410_UFCON);
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
if (!soc_is_s3c2410())
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%p]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
regs, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
void s3c_pm_restore_uarts(void)
{
void __iomem *regs = s3c_pm_uart_base();
struct pm_uart_save *save = &uart_save;
s3c_pm_arch_update_uart(regs, save);
__raw_writel(save->ulcon, regs + S3C2410_ULCON);
__raw_writel(save->ucon, regs + S3C2410_UCON);
__raw_writel(save->ufcon, regs + S3C2410_UFCON);
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
if (!soc_is_s3c2410())
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}

145
arch/arm/plat-samsung/pm.c
Просмотреть файл

@ -17,7 +17,6 @@
#include <linux/errno.h>
#include <linux/delay.h>
#include <linux/of.h>
#include <linux/serial_core.h>
#include <linux/serial_s3c.h>
#include <linux/io.h>
@ -25,7 +24,6 @@
#include <asm/suspend.h>
#ifdef CONFIG_SAMSUNG_ATAGS
#include <mach/hardware.h>
#include <mach/map.h>
#ifndef CONFIG_ARCH_EXYNOS
#include <mach/regs-clock.h>
@ -43,93 +41,6 @@
unsigned long s3c_pm_flags;
/* Debug code:
*
* This code supports debug output to the low level UARTs for use on
* resume before the console layer is available.
*/
#ifdef CONFIG_SAMSUNG_PM_DEBUG
extern void printascii(const char *);
void s3c_pm_dbg(const char *fmt, ...)
{
va_list va;
char buff[256];
va_start(va, fmt);
vsnprintf(buff, sizeof(buff), fmt, va);
va_end(va);
printascii(buff);
}
static inline void s3c_pm_debug_init(void)
{
/* restart uart clocks so we can use them to output */
s3c_pm_debug_init_uart();
}
#else
#define s3c_pm_debug_init() do { } while(0)
#endif /* CONFIG_SAMSUNG_PM_DEBUG */
/* Save the UART configurations if we are configured for debug. */
unsigned char pm_uart_udivslot;
#ifdef CONFIG_SAMSUNG_PM_DEBUG
static struct pm_uart_save uart_save;
static void s3c_pm_save_uart(unsigned int uart, struct pm_uart_save *save)
{
void __iomem *regs = S3C_VA_UARTx(uart);
save->ulcon = __raw_readl(regs + S3C2410_ULCON);
save->ucon = __raw_readl(regs + S3C2410_UCON);
save->ufcon = __raw_readl(regs + S3C2410_UFCON);
save->umcon = __raw_readl(regs + S3C2410_UMCON);
save->ubrdiv = __raw_readl(regs + S3C2410_UBRDIV);
if (pm_uart_udivslot)
save->udivslot = __raw_readl(regs + S3C2443_DIVSLOT);
S3C_PMDBG("UART[%d]: ULCON=%04x, UCON=%04x, UFCON=%04x, UBRDIV=%04x\n",
uart, save->ulcon, save->ucon, save->ufcon, save->ubrdiv);
}
static void s3c_pm_save_uarts(void)
{
s3c_pm_save_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
static void s3c_pm_restore_uart(unsigned int uart, struct pm_uart_save *save)
{
void __iomem *regs = S3C_VA_UARTx(uart);
s3c_pm_arch_update_uart(regs, save);
__raw_writel(save->ulcon, regs + S3C2410_ULCON);
__raw_writel(save->ucon, regs + S3C2410_UCON);
__raw_writel(save->ufcon, regs + S3C2410_UFCON);
__raw_writel(save->umcon, regs + S3C2410_UMCON);
__raw_writel(save->ubrdiv, regs + S3C2410_UBRDIV);
if (pm_uart_udivslot)
__raw_writel(save->udivslot, regs + S3C2443_DIVSLOT);
}
static void s3c_pm_restore_uarts(void)
{
s3c_pm_restore_uart(CONFIG_DEBUG_S3C_UART, &uart_save);
}
#else
static void s3c_pm_save_uarts(void) { }
static void s3c_pm_restore_uarts(void) { }
#endif
/* The IRQ ext-int code goes here, it is too small to currently bother
* with its own file. */
@ -154,62 +65,6 @@ int s3c_irqext_wake(struct irq_data *data, unsigned int state)
return 0;
}
/* helper functions to save and restore register state */
/**
* s3c_pm_do_save() - save a set of registers for restoration on resume.
* @ptr: Pointer to an array of registers.
* @count: Size of the ptr array.
*
* Run through the list of registers given, saving their contents in the
* array for later restoration when we wakeup.
*/
void s3c_pm_do_save(struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
ptr->val = __raw_readl(ptr->reg);
S3C_PMDBG("saved %p value %08lx\n", ptr->reg, ptr->val);
}
}
/**
* s3c_pm_do_restore() - restore register values from the save list.
* @ptr: Pointer to an array of registers.
* @count: Size of the ptr array.
*
* Restore the register values saved from s3c_pm_do_save().
*
* Note, we do not use S3C_PMDBG() in here, as the system may not have
* restore the UARTs state yet
*/
void s3c_pm_do_restore(const struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++) {
printk(KERN_DEBUG "restore %p (restore %08lx, was %08x)\n",
ptr->reg, ptr->val, __raw_readl(ptr->reg));
__raw_writel(ptr->val, ptr->reg);
}
}
/**
* s3c_pm_do_restore_core() - early restore register values from save list.
*
* This is similar to s3c_pm_do_restore() except we try and minimise the
* side effects of the function in case registers that hardware might need
* to work has been restored.
*
* WARNING: Do not put any debug in here that may effect memory or use
* peripherals, as things may be changing!
*/
void s3c_pm_do_restore_core(const struct sleep_save *ptr, int count)
{
for (; count > 0; count--, ptr++)
__raw_writel(ptr->val, ptr->reg);
}
/* s3c2410_pm_show_resume_irqs
*
* print any IRQs asserted at resume time (ie, we woke from)

17
arch/arm/plat-samsung/s5p-dev-mfc.c
Просмотреть файл

@ -122,32 +122,35 @@ device_initcall(s5p_mfc_memory_init);
#endif
#ifdef CONFIG_OF
int __init s5p_fdt_find_mfc_mem(unsigned long node, const char *uname,
int __init s5p_fdt_alloc_mfc_mem(unsigned long node, const char *uname,
int depth, void *data)
{
__be32 *prop;
unsigned long len;
struct s5p_mfc_dt_meminfo *mfc_mem = data;
struct s5p_mfc_dt_meminfo mfc_mem;
if (!data)
return 0;
if (!of_flat_dt_is_compatible(node, mfc_mem->compatible))
if (!of_flat_dt_is_compatible(node, data))
return 0;
prop = of_get_flat_dt_prop(node, "samsung,mfc-l", &len);
if (!prop || (len != 2 * sizeof(unsigned long)))
return 0;
mfc_mem->loff = be32_to_cpu(prop[0]);
mfc_mem->lsize = be32_to_cpu(prop[1]);
mfc_mem.loff = be32_to_cpu(prop[0]);
mfc_mem.lsize = be32_to_cpu(prop[1]);
prop = of_get_flat_dt_prop(node, "samsung,mfc-r", &len);
if (!prop || (len != 2 * sizeof(unsigned long)))
return 0;
mfc_mem->roff = be32_to_cpu(prop[0]);
mfc_mem->rsize = be32_to_cpu(prop[1]);
mfc_mem.roff = be32_to_cpu(prop[0]);
mfc_mem.rsize = be32_to_cpu(prop[1]);
s5p_mfc_reserve_mem(mfc_mem.roff, mfc_mem.rsize,
mfc_mem.loff, mfc_mem.lsize);
return 1;
}

1
arch/arm/plat-samsung/s5p-dev-uart.c
Просмотреть файл

@ -18,7 +18,6 @@
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/hardware.h>
#include <mach/map.h>
#include <plat/devs.h>

43
arch/arm/plat-samsung/s5p-sleep.S
Просмотреть файл

@ -23,18 +23,7 @@
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/hardware/cache-l2x0.h>
#define CPU_MASK 0xff0ffff0
#define CPU_CORTEX_A9 0x410fc090
/*
* The following code is located into the .data section. This is to
* allow l2x0_regs_phys to be accessed with a relative load while we
* can't rely on any MMU translation. We could have put l2x0_regs_phys
* in the .text section as well, but some setups might insist on it to
* be truly read-only. (Reference from: arch/arm/kernel/sleep.S)
*/
.data
.align
@ -53,37 +42,5 @@
*/
ENTRY(s3c_cpu_resume)
#ifdef CONFIG_CACHE_L2X0
mrc p15, 0, r0, c0, c0, 0
ldr r1, =CPU_MASK
and r0, r0, r1
ldr r1, =CPU_CORTEX_A9
cmp r0, r1
bne resume_l2on
adr r0, l2x0_regs_phys
ldr r0, [r0]
ldr r1, [r0, #L2X0_R_PHY_BASE]
ldr r2, [r1, #L2X0_CTRL]
tst r2, #0x1
bne resume_l2on
ldr r2, [r0, #L2X0_R_AUX_CTRL]
str r2, [r1, #L2X0_AUX_CTRL]
ldr r2, [r0, #L2X0_R_TAG_LATENCY]
str r2, [r1, #L2X0_TAG_LATENCY_CTRL]
ldr r2, [r0, #L2X0_R_DATA_LATENCY]
str r2, [r1, #L2X0_DATA_LATENCY_CTRL]
ldr r2, [r0, #L2X0_R_PREFETCH_CTRL]
str r2, [r1, #L2X0_PREFETCH_CTRL]
ldr r2, [r0, #L2X0_R_PWR_CTRL]
str r2, [r1, #L2X0_POWER_CTRL]
mov r2, #1
str r2, [r1, #L2X0_CTRL]
resume_l2on:
#endif
b cpu_resume
ENDPROC(s3c_cpu_resume)
#ifdef CONFIG_CACHE_L2X0
.globl l2x0_regs_phys
l2x0_regs_phys:
.long 0
#endif

2
drivers/clk/samsung/clk-exynos-audss.c
Просмотреть файл

@ -17,7 +17,7 @@
#include <linux/module.h>
#include <linux/platform_device.h>
#include <dt-bindings/clk/exynos-audss-clk.h>
#include <dt-bindings/clock/exynos-audss-clk.h>
enum exynos_audss_clk_type {
TYPE_EXYNOS4210,

6
drivers/clk/versatile/clk-impd1.c
Просмотреть файл

@ -13,10 +13,12 @@
#include <linux/io.h>
#include <linux/platform_data/clk-integrator.h>
#include <mach/impd1.h>
#include "clk-icst.h"
#define IMPD1_OSC1 0x00
#define IMPD1_OSC2 0x04
#define IMPD1_LOCK 0x08
struct impd1_clk {
char *vco1name;
struct clk *vco1clk;

87
drivers/clk/zynq/clkc.c
Просмотреть файл

@ -21,34 +21,35 @@
#include <linux/clk/zynq.h>
#include <linux/clk-provider.h>
#include <linux/of.h>
#include <linux/of_address.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/io.h>
static void __iomem *zynq_slcr_base_priv;
static void __iomem *zynq_clkc_base;
#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100)
#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104)
#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108)
#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c)
#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120)
#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124)
#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128)
#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c)
#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140)
#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144)
#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148)
#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c)
#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150)
#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154)
#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158)
#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c)
#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160)
#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164)
#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168)
#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170)
#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4)
#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304)
#define SLCR_ARMPLL_CTRL (zynq_clkc_base + 0x00)
#define SLCR_DDRPLL_CTRL (zynq_clkc_base + 0x04)
#define SLCR_IOPLL_CTRL (zynq_clkc_base + 0x08)
#define SLCR_PLL_STATUS (zynq_clkc_base + 0x0c)
#define SLCR_ARM_CLK_CTRL (zynq_clkc_base + 0x20)
#define SLCR_DDR_CLK_CTRL (zynq_clkc_base + 0x24)
#define SLCR_DCI_CLK_CTRL (zynq_clkc_base + 0x28)
#define SLCR_APER_CLK_CTRL (zynq_clkc_base + 0x2c)
#define SLCR_GEM0_CLK_CTRL (zynq_clkc_base + 0x40)
#define SLCR_GEM1_CLK_CTRL (zynq_clkc_base + 0x44)
#define SLCR_SMC_CLK_CTRL (zynq_clkc_base + 0x48)
#define SLCR_LQSPI_CLK_CTRL (zynq_clkc_base + 0x4c)
#define SLCR_SDIO_CLK_CTRL (zynq_clkc_base + 0x50)
#define SLCR_UART_CLK_CTRL (zynq_clkc_base + 0x54)
#define SLCR_SPI_CLK_CTRL (zynq_clkc_base + 0x58)
#define SLCR_CAN_CLK_CTRL (zynq_clkc_base + 0x5c)
#define SLCR_CAN_MIOCLK_CTRL (zynq_clkc_base + 0x60)
#define SLCR_DBG_CLK_CTRL (zynq_clkc_base + 0x64)
#define SLCR_PCAP_CLK_CTRL (zynq_clkc_base + 0x68)
#define SLCR_FPGA0_CLK_CTRL (zynq_clkc_base + 0x70)
#define SLCR_621_TRUE (zynq_clkc_base + 0xc4)
#define SLCR_SWDT_CLK_SEL (zynq_clkc_base + 0x204)
#define NUM_MIO_PINS 54
@ -569,8 +570,42 @@ static void __init zynq_clk_setup(struct device_node *np)
CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup);
void __init zynq_clock_init(void __iomem *slcr_base)
void __init zynq_clock_init(void)
{
zynq_slcr_base_priv = slcr_base;
of_clk_init(NULL);
struct device_node *np;
struct device_node *slcr;
struct resource res;
np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc");
if (!np) {
pr_err("%s: clkc node not found\n", __func__);
goto np_err;
}
if (of_address_to_resource(np, 0, &res)) {
pr_err("%s: failed to get resource\n", np->name);
goto np_err;
}
slcr = of_get_parent(np);
if (slcr->data) {
zynq_clkc_base = (__force void __iomem *)slcr->data + res.start;
} else {
pr_err("%s: Unable to get I/O memory\n", np->name);
of_node_put(slcr);
goto np_err;
}
pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base);
of_node_put(slcr);
of_node_put(np);
return;
np_err:
of_node_put(np);
BUG();
return;
}

0
include/dt-bindings/clk/exynos-audss-clk.h → include/dt-bindings/clock/exynos-audss-clk.h
Просмотреть файл

2
include/linux/clk/zynq.h
Просмотреть файл

@ -22,7 +22,7 @@
#include <linux/spinlock.h>
void zynq_clock_init(void __iomem *slcr);
void zynq_clock_init(void);
struct clk *clk_register_zynq_pll(const char *name, const char *parent,
void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index,

2
include/linux/serial_s3c.h
Просмотреть файл

@ -233,6 +233,8 @@
#ifndef __ASSEMBLY__
#include <linux/serial_core.h>
/* configuration structure for per-machine configurations for the
* serial port
*