arm64: dts: rockchip: add RK3399-Q7 (Puma) SoM
The RK3399-Q7 SoM is a Qseven-compatible (70mm x 70mm, MXM-230 connector) system-on-module from Theobroma Systems, featuring the Rockchip RK3399. It provides the following feature set: * up to 4GB DDR3 * on-module SPI-NOR flash * on-module eMMC (with 8-bit 1.8V interface) * SD card (on a baseboad) via edge connector * Gigabit Ethernet with on-module Micrel KSZ9031 GbE PHY * HDMI/eDP/2x MIPI-DSI * 2x MIPI-CSI * USB - 1x USB 3.0 dual-role (direct connection) - 2x USB 3.0 host + 1x USB 2.0 (on-module USB 3.0 hub) * on-module STM32 Cortex-M0 companion controller, implementing: - low-power RTC functionality (ISL1208 emulation) - fan controller (AMC6821 emulation) - USB<->CAN bridge controller Signed-off-by: Klaus Goger <klaus.goger@theobroma-systems.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
This commit is contained in:
Klaus Goger
Heiko Stuebner
Родитель
68987f4494
Коммит
2c66fc34e9
|
|
@ -0,0 +1,547 @@
|
|||
/*
|
||||
* Copyright (c) 2017 Theobroma Systems Design und Consulting GmbH
|
||||
*
|
||||
* This file is dual-licensed: you can use it either under the terms
|
||||
* of the GPL or the X11 license, at your option. Note that this dual
|
||||
* licensing only applies to this file, and not this project as a
|
||||
* whole.
|
||||
*
|
||||
* a) This file is free software; you can redistribute it and/or
|
||||
* modify it under the terms of the GNU General Public License as
|
||||
* published by the Free Software Foundation; either version 2 of the
|
||||
* License, or (at your option) any later version.
|
||||
*
|
||||
* This file is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* Or, alternatively,
|
||||
*
|
||||
* b) Permission is hereby granted, free of charge, to any person
|
||||
* obtaining a copy of this software and associated documentation
|
||||
* files (the "Software"), to deal in the Software without
|
||||
* restriction, including without limitation the rights to use,
|
||||
* copy, modify, merge, publish, distribute, sublicense, and/or
|
||||
* sell copies of the Software, and to permit persons to whom the
|
||||
* Software is furnished to do so, subject to the following
|
||||
* conditions:
|
||||
*
|
||||
* The above copyright notice and this permission notice shall be
|
||||
* included in all copies or substantial portions of the Software.
|
||||
*
|
||||
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
|
||||
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
|
||||
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
|
||||
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
|
||||
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
|
||||
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
|
||||
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
|
||||
* OTHER DEALINGS IN THE SOFTWARE.
|
||||
*/
|
||||
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include "rk3399.dtsi"
|
||||
#include "rk3399-opp.dtsi"
|
||||
|
||||
/ {
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&led_pin_module>;
|
||||
|
||||
module-led {
|
||||
label = "module_led";
|
||||
gpios = <&gpio2 RK_PD1 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
panic-indicator;
|
||||
};
|
||||
};
|
||||
|
||||
/*
|
||||
* Overwrite the opp-table for CPUB as this board uses a different
|
||||
* regulator (FAN53555) that only allows 10mV steps and therefore
|
||||
* can't reach the operation point target voltages from rk3399-opp.dtsi
|
||||
*/
|
||||
/delete-node/ opp-table1;
|
||||
cluster1_opp: opp-table1 {
|
||||
compatible = "operating-points-v2";
|
||||
opp-shared;
|
||||
|
||||
opp00 {
|
||||
opp-hz = /bits/ 64 <408000000>;
|
||||
opp-microvolt = <800000>;
|
||||
clock-latency-ns = <40000>;
|
||||
};
|
||||
opp01 {
|
||||
opp-hz = /bits/ 64 <600000000>;
|
||||
opp-microvolt = <800000>;
|
||||
};
|
||||
opp02 {
|
||||
opp-hz = /bits/ 64 <816000000>;
|
||||
opp-microvolt = <830000>;
|
||||
opp-suspend;
|
||||
};
|
||||
opp03 {
|
||||
opp-hz = /bits/ 64 <1008000000>;
|
||||
opp-microvolt = <880000>;
|
||||
};
|
||||
opp04 {
|
||||
opp-hz = /bits/ 64 <1200000000>;
|
||||
opp-microvolt = <950000>;
|
||||
};
|
||||
opp05 {
|
||||
opp-hz = /bits/ 64 <1416000000>;
|
||||
opp-microvolt = <1030000>;
|
||||
};
|
||||
opp06 {
|
||||
opp-hz = /bits/ 64 <1608000000>;
|
||||
opp-microvolt = <1100000>;
|
||||
};
|
||||
opp07 {
|
||||
opp-hz = /bits/ 64 <1800000000>;
|
||||
opp-microvolt = <1200000>;
|
||||
};
|
||||
opp08 {
|
||||
opp-hz = /bits/ 64 <1992000000>;
|
||||
opp-microvolt = <1230000>;
|
||||
turbo-mode;
|
||||
};
|
||||
};
|
||||
|
||||
clkin_gmac: external-gmac-clock {
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <125000000>;
|
||||
clock-output-names = "clkin_gmac";
|
||||
#clock-cells = <0>;
|
||||
};
|
||||
|
||||
vcc1v2_phy: vcc1v2-phy {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc1v2_phy";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc3v3_sys: vcc3v3-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc3v3_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_host: vcc5v0-host-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
gpio = <&gpio4 RK_PA3 GPIO_ACTIVE_HIGH>;
|
||||
enable-active-low;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&vcc5v0_host_en>;
|
||||
regulator-name = "vcc5v0_host";
|
||||
regulator-always-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
|
||||
vcc5v0_sys: vcc5v0-sys {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vcc5v0_sys";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
};
|
||||
|
||||
vdd_log: vdd-log {
|
||||
compatible = "pwm-regulator";
|
||||
pwms = <&pwm2 0 25000 0>;
|
||||
regulator-name = "vdd_log";
|
||||
regulator-min-microvolt = <800000>;
|
||||
regulator-max-microvolt = <1400000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&cpu_b0 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_b1 {
|
||||
cpu-supply = <&vdd_cpu_b>;
|
||||
};
|
||||
|
||||
&cpu_l0 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l1 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l2 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&cpu_l3 {
|
||||
cpu-supply = <&vdd_cpu_l>;
|
||||
};
|
||||
|
||||
&emmc_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&gmac {
|
||||
assigned-clocks = <&cru SCLK_RMII_SRC>;
|
||||
assigned-clock-parents = <&clkin_gmac>;
|
||||
clock_in_out = "input";
|
||||
phy-supply = <&vcc1v2_phy>;
|
||||
phy-mode = "rgmii";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rgmii_pins>;
|
||||
snps,reset-gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_HIGH>;
|
||||
snps,reset-active-low;
|
||||
snps,reset-delays-us = <0 10000 50000>;
|
||||
tx_delay = <0x10>;
|
||||
rx_delay = <0x10>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
i2c-scl-rising-time-ns = <168>;
|
||||
i2c-scl-falling-time-ns = <4>;
|
||||
clock-frequency = <400000>;
|
||||
|
||||
rk808: pmic@1b {
|
||||
compatible = "rockchip,rk808";
|
||||
reg = <0x1b>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <22 IRQ_TYPE_LEVEL_LOW>;
|
||||
#clock-cells = <1>;
|
||||
clock-output-names = "xin32k", "rk808-clkout2";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pmic_int_l>;
|
||||
rockchip,system-power-controller;
|
||||
wakeup-source;
|
||||
|
||||
vcc1-supply = <&vcc5v0_sys>;
|
||||
vcc2-supply = <&vcc5v0_sys>;
|
||||
vcc3-supply = <&vcc5v0_sys>;
|
||||
vcc4-supply = <&vcc5v0_sys>;
|
||||
vcc6-supply = <&vcc5v0_sys>;
|
||||
vcc7-supply = <&vcc5v0_sys>;
|
||||
vcc8-supply = <&vcc3v3_sys>;
|
||||
vcc9-supply = <&vcc5v0_sys>;
|
||||
vcc10-supply = <&vcc5v0_sys>;
|
||||
vcc11-supply = <&vcc5v0_sys>;
|
||||
vcc12-supply = <&vcc3v3_sys>;
|
||||
vddio-supply = <&vcc1v8_pmu>;
|
||||
|
||||
regulators {
|
||||
vdd_center: DCDC_REG1 {
|
||||
regulator-name = "vdd_center";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vdd_cpu_l: DCDC_REG2 {
|
||||
regulator-name = "vdd_cpu_l";
|
||||
regulator-min-microvolt = <750000>;
|
||||
regulator-max-microvolt = <1350000>;
|
||||
regulator-ramp-delay = <6001>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ddr: DCDC_REG3 {
|
||||
regulator-name = "vcc_ddr";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_1v8: DCDC_REG4 {
|
||||
regulator-name = "vcc_1v8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ldo1: LDO_REG1 {
|
||||
regulator-name = "vcc_ldo1";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_hdmi: LDO_REG2 {
|
||||
regulator-name = "vcc1v8_hdmi";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc1v8_pmu: LDO_REG3 {
|
||||
regulator-name = "vcc1v8_pmu";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <1800000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_sd: LDO_REG4 {
|
||||
regulator-name = "vcc_sd";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-on-in-suspend;
|
||||
regulator-suspend-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ldo5: LDO_REG5 {
|
||||
regulator-name = "vcc_ldo5";
|
||||
regulator-min-microvolt = <3000000>;
|
||||
regulator-max-microvolt = <3000000>;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_ldo6: LDO_REG6 {
|
||||
regulator-name = "vcc_ldo6";
|
||||
regulator-min-microvolt = <1500000>;
|
||||
regulator-max-microvolt = <1500000>;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc0v9_hdmi: LDO_REG7 {
|
||||
regulator-name = "vcc0v9_hdmi";
|
||||
regulator-min-microvolt = <900000>;
|
||||
regulator-max-microvolt = <900000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc_efuse: LDO_REG8 {
|
||||
regulator-name = "vcc_efuse";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s3: SWITCH_REG1 {
|
||||
regulator-name = "vcc3v3_s3";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
|
||||
vcc3v3_s0: SWITCH_REG2 {
|
||||
regulator-name = "vcc3v3_s0";
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
regulator-state-mem {
|
||||
regulator-off-in-suspend;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vdd_gpu: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-name = "vdd_gpu";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1230000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c7 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
fan: fan@18 {
|
||||
compatible = "ti,amc6821";
|
||||
reg = <0x18>;
|
||||
cooling-min-state = <0>;
|
||||
cooling-max-state = <9>;
|
||||
#cooling-cells = <2>;
|
||||
};
|
||||
|
||||
rtc_twi: rtc@6f {
|
||||
compatible = "isil,isl1208";
|
||||
reg = <0x6f>;
|
||||
};
|
||||
};
|
||||
|
||||
&i2c8 {
|
||||
status = "okay";
|
||||
clock-frequency = <400000>;
|
||||
|
||||
vdd_cpu_b: regulator@60 {
|
||||
compatible = "fcs,fan53555";
|
||||
reg = <0x60>;
|
||||
vin-supply = <&vcc5v0_sys>;
|
||||
regulator-name = "vdd_cpu_b";
|
||||
regulator-min-microvolt = <600000>;
|
||||
regulator-max-microvolt = <1230000>;
|
||||
regulator-ramp-delay = <1000>;
|
||||
fcs,suspend-voltage-selector = <1>;
|
||||
regulator-always-on;
|
||||
regulator-boot-on;
|
||||
};
|
||||
};
|
||||
|
||||
&io_domains {
|
||||
status = "okay";
|
||||
bt656-supply = <&vcc_1v8>;
|
||||
audio-supply = <&vcc_1v8>;
|
||||
sdmmc-supply = <&vcc_sd>;
|
||||
gpio1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&pmu_io_domains {
|
||||
status = "okay";
|
||||
pmu1830-supply = <&vcc_1v8>;
|
||||
};
|
||||
|
||||
&pwm2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
i2c8 {
|
||||
i2c8_xfer_a: i2c8-xfer {
|
||||
rockchip,pins =
|
||||
<RK_GPIO1 RK_PC4 RK_FUNC_1 &pcfg_pull_up>,
|
||||
<RK_GPIO1 RK_PC5 RK_FUNC_1 &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
led_pin_module: led-module-gpio {
|
||||
rockchip,pins =
|
||||
<RK_GPIO2 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
|
||||
pmic {
|
||||
pmic_int_l: pmic-int-l {
|
||||
rockchip,pins =
|
||||
<RK_GPIO1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
|
||||
};
|
||||
};
|
||||
|
||||
usb2 {
|
||||
vcc5v0_host_en: vcc5v0-host-en {
|
||||
rockchip,pins =
|
||||
<RK_GPIO4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&sdhci {
|
||||
bus-width = <8>;
|
||||
mmc-hs400-1_8v;
|
||||
mmc-hs400-enhanced-strobe;
|
||||
non-removable;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&sdmmc {
|
||||
vqmmc = <&vcc_sd>;
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
norflash: flash@0 {
|
||||
compatible = "jedec,spi-nor";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <50000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&u2phy1 {
|
||||
status = "okay";
|
||||
|
||||
u2phy1_otg: otg-port {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
u2phy1_host: host-port {
|
||||
phy-supply = <&vcc5v0_host>;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&usbdrd3_1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usbdrd_dwc3_1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&usb_host1_ehci {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_host1_ohci {
|
||||
status = "okay";
|
||||
};
|
||||
Загрузка…
Ссылка в новой задаче