microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

[PATCH] ppc32: board-specific part of fs_enet update 

This contains board-specific portion to respect driver changes (for 8272ads ,
885ads and 866ads).  Altered platform_data structures as well as initial setup
routines relevant to fs_enet.

Changes to the mpc8560ads ppc/ code are also introduced, but mainly as
reference, since the entire board support is going to appear in arch/powerpc.

Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
This commit is contained in:
Vitaly Bordug 2006-08-14 23:00:31 -07:00 коммит произвёл Jeff Garzik
Родитель 5b4b845434
Коммит 2ca2d5e84c
15 изменённых файлов: 577 добавлений и 390 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

89
arch/ppc/platforms/85xx/mpc8560_ads.c
Просмотреть файл

@ -29,6 +29,7 @@
#include <linux/initrd.h>
#include <linux/module.h>
#include <linux/fsl_devices.h>
#include <linux/fs_enet_pd.h>
#include <asm/system.h>
#include <asm/pgtable.h>
@ -58,6 +59,71 @@
* Setup the architecture
*
*/
static void init_fcc_ioports(void)
{
struct immap *immap;
struct io_port *io;
u32 tempval;
immap = cpm2_immr;
io = &immap->im_ioport;
/* FCC2/3 are on the ports B/C. */
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB2_DIRB0;
tempval |= PB2_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB2_PSORB0;
tempval |= PB2_PSORB1;
out_be32(&io->iop_psorb, tempval);
tempval = in_be32(&io->iop_pparb);
tempval |= (PB2_DIRB0 | PB2_DIRB1);
out_be32(&io->iop_pparb, tempval);
tempval = in_be32(&io->iop_pdirb);
tempval &= ~PB3_DIRB0;
tempval |= PB3_DIRB1;
out_be32(&io->iop_pdirb, tempval);
tempval = in_be32(&io->iop_psorb);
tempval &= ~PB3_PSORB0;
tempval |= PB3_PSORB1;
out_be32(&io->iop_psorb, tempval);
tempval = in_be32(&io->iop_pparb);
tempval |= (PB3_DIRB0 | PB3_DIRB1);
out_be32(&io->iop_pparb, tempval);
tempval = in_be32(&io->iop_pdirc);
tempval |= PC3_DIRC1;
out_be32(&io->iop_pdirc, tempval);
tempval = in_be32(&io->iop_pparc);
tempval |= PC3_DIRC1;
out_be32(&io->iop_pparc, tempval);
/* Port C has clocks...... */
tempval = in_be32(&io->iop_psorc);
tempval &= ~(CLK_TRX);
out_be32(&io->iop_psorc, tempval);
tempval = in_be32(&io->iop_pdirc);
tempval &= ~(CLK_TRX);
out_be32(&io->iop_pdirc, tempval);
tempval = in_be32(&io->iop_pparc);
tempval |= (CLK_TRX);
out_be32(&io->iop_pparc, tempval);
/* Configure Serial Interface clock routing.
* First, clear all FCC bits to zero,
* then set the ones we want.
*/
immap->im_cpmux.cmx_fcr &= ~(CPMUX_CLK_MASK);
immap->im_cpmux.cmx_fcr |= CPMUX_CLK_ROUTE;
}
static void __init
mpc8560ads_setup_arch(void)
@ -66,6 +132,7 @@ mpc8560ads_setup_arch(void)
unsigned int freq;
struct gianfar_platform_data *pdata;
struct gianfar_mdio_data *mdata;
struct fs_platform_info *fpi;
cpm2_reset();
@ -110,6 +177,28 @@ mpc8560ads_setup_arch(void)
memcpy(pdata->mac_addr, binfo->bi_enet1addr, 6);
}
init_fcc_ioports();
ppc_sys_device_remove(MPC85xx_CPM_FCC1);
fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC2);
if (fpi) {
memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
fpi->bus_id = "0:02";
fpi->phy_addr = 2;
fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[1];
}
fpi = (struct fs_platform_info *) ppc_sys_get_pdata(MPC85xx_CPM_FCC3);
if (fpi) {
memcpy(fpi->macaddr, binfo->bi_enet2addr, 6);
fpi->macaddr[5] += 1;
fpi->bus_id = "0:03";
fpi->phy_addr = 3;
fpi->dpram_offset = (u32)cpm2_immr->im_dprambase;
fpi->fcc_regs_c = (u32)&cpm2_immr->im_fcc_c[2];
}
#ifdef CONFIG_BLK_DEV_INITRD
if (initrd_start)
ROOT_DEV = Root_RAM0;

19
arch/ppc/platforms/85xx/mpc85xx_ads_common.h
Просмотреть файл

@ -45,4 +45,23 @@ extern void mpc85xx_ads_map_io(void) __init;
#define MPC85XX_PCI1_IO_SIZE 0x01000000
/* FCC1 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK9-12 */
#define F1_RXCLK 12
#define F1_TXCLK 11
/* FCC2 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F2_RXCLK 13
#define F2_TXCLK 14
/* FCC3 Clock Source Configuration. These can be
* redefined in the board specific file.
* Can only choose from CLK13-16 */
#define F3_RXCLK 15
#define F3_TXCLK 16
#endif /* __MACH_MPC85XX_ADS_H__ */

152
arch/ppc/platforms/mpc8272ads_setup.c
Просмотреть файл

@ -56,64 +56,51 @@ static struct fs_uart_platform_info mpc8272_uart_pdata[] = {
},
};
static struct fs_mii_bus_info mii_bus_info = {
.method = fsmii_bitbang,
.id = 0,
.i.bitbang = {
.mdio_port = fsiop_portc,
.mdio_bit = 18,
.mdc_port = fsiop_portc,
.mdc_bit = 19,
.delay = 1,
static struct fs_mii_bb_platform_info m82xx_mii_bb_pdata = {
.mdio_dat.bit = 18,
.mdio_dir.bit = 18,
.mdc_dat.bit = 19,
.delay = 1,
};
static struct fs_platform_info mpc82xx_enet_pdata[] = {
[fsid_fcc1] = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.clk_route = CMX1_CLK_ROUTE,
.clk_mask = CMX1_CLK_MASK,
.init_ioports = init_fcc1_ioports,
.mem_offset = FCC1_MEM_OFFSET,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:00",
},
};
[fsid_fcc2] = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.clk_route = CMX2_CLK_ROUTE,
.clk_mask = CMX2_CLK_MASK,
.init_ioports = init_fcc2_ioports,
static struct fs_platform_info mpc82xx_fcc1_pdata = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.clk_route = CMX1_CLK_ROUTE,
.clk_mask = CMX1_CLK_MASK,
.init_ioports = init_fcc1_ioports,
.mem_offset = FCC2_MEM_OFFSET,
.phy_addr = 0,
#ifdef PHY_INTERRUPT
.phy_irq = PHY_INTERRUPT,
#else
.phy_irq = -1;
#endif
.mem_offset = FCC1_MEM_OFFSET,
.bus_info = &mii_bus_info,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
};
static struct fs_platform_info mpc82xx_fcc2_pdata = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.clk_route = CMX2_CLK_ROUTE,
.clk_mask = CMX2_CLK_MASK,
.init_ioports = init_fcc2_ioports,
.phy_addr = 3,
#ifdef PHY_INTERRUPT
.phy_irq = PHY_INTERRUPT,
#else
.phy_irq = -1;
#endif
.mem_offset = FCC2_MEM_OFFSET,
.bus_info = &mii_bus_info,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.bus_id = "0:03",
},
};
static void init_fcc1_ioports(void)
@ -209,20 +196,21 @@ static void __init mpc8272ads_fixup_enet_pdata(struct platform_device *pdev,
bd_t* bi = (void*)__res;
int fs_no = fsid_fcc1+pdev->id-1;
mpc82xx_fcc1_pdata.dpram_offset = mpc82xx_fcc2_pdata.dpram_offset = (u32)cpm2_immr->im_dprambase;
mpc82xx_fcc1_pdata.fcc_regs_c = mpc82xx_fcc2_pdata.fcc_regs_c = (u32)cpm2_immr->im_fcc_c;
switch(fs_no) {
case fsid_fcc1:
memcpy(&mpc82xx_fcc1_pdata.macaddr,bi->bi_enetaddr,6);
pdev->dev.platform_data = &mpc82xx_fcc1_pdata;
break;
case fsid_fcc2:
memcpy(&mpc82xx_fcc2_pdata.macaddr,bi->bi_enetaddr,6);
mpc82xx_fcc2_pdata.macaddr[5] ^= 1;
pdev->dev.platform_data = &mpc82xx_fcc2_pdata;
break;
if(fs_no > ARRAY_SIZE(mpc82xx_enet_pdata)) {
return;
}
mpc82xx_enet_pdata[fs_no].dpram_offset=
(u32)cpm2_immr->im_dprambase;
mpc82xx_enet_pdata[fs_no].fcc_regs_c =
(u32)cpm2_immr->im_fcc_c;
memcpy(&mpc82xx_enet_pdata[fs_no].macaddr,bi->bi_enetaddr,6);
/* prevent dup mac */
if(fs_no == fsid_fcc2)
mpc82xx_enet_pdata[fs_no].macaddr[5] ^= 1;
pdev->dev.platform_data = &mpc82xx_enet_pdata[fs_no];
}
static void mpc8272ads_fixup_uart_pdata(struct platform_device *pdev,
@ -274,6 +262,29 @@ static void init_scc4_uart_ioports(void)
iounmap(immap);
}
static void __init mpc8272ads_fixup_mdio_pdata(struct platform_device *pdev,
int idx)
{
m82xx_mii_bb_pdata.irq[0] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[1] = -1;
m82xx_mii_bb_pdata.irq[2] = -1;
m82xx_mii_bb_pdata.irq[3] = PHY_INTERRUPT;
m82xx_mii_bb_pdata.irq[31] = -1;
m82xx_mii_bb_pdata.mdio_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
m82xx_mii_bb_pdata.mdio_dir.offset =
(u32)&cpm2_immr->im_ioport.iop_pdirc;
m82xx_mii_bb_pdata.mdc_dat.offset =
(u32)&cpm2_immr->im_ioport.iop_pdatc;
pdev->dev.platform_data = &m82xx_mii_bb_pdata;
}
static int mpc8272ads_platform_notify(struct device *dev)
{
static const struct platform_notify_dev_map dev_map[] = {
@ -285,6 +296,10 @@ static int mpc8272ads_platform_notify(struct device *dev)
.bus_id = "fsl-cpm-scc:uart",
.rtn = mpc8272ads_fixup_uart_pdata,
},
{
.bus_id = "fsl-bb-mdio",
.rtn = mpc8272ads_fixup_mdio_pdata,
},
{
.bus_id = NULL
}
@ -319,6 +334,7 @@ int __init mpc8272ads_init(void)
ppc_sys_device_enable(MPC82xx_CPM_SCC4);
#endif
ppc_sys_device_enable(MPC82xx_MDIO_BB);
return 0;
}

192
arch/ppc/platforms/mpc866ads_setup.c
Просмотреть файл

@ -1,10 +1,10 @@
/*arch/ppc/platforms/mpc885ads-setup.c
/*arch/ppc/platforms/mpc866ads-setup.c
*
* Platform setup for the Freescale mpc885ads board
* Platform setup for the Freescale mpc866ads board
*
* Vitaly Bordug <vbordug@ru.mvista.com>
*
* Copyright 2005 MontaVista Software Inc.
* Copyright 2005-2006 MontaVista Software Inc.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
@ -42,49 +42,36 @@ static void setup_scc1_ioports(void);
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
};
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
static struct fs_mii_bus_info scc_mii_bus_info = {
.method = fsmii_fixed,
.id = 0,
.i.fixed.speed = 10,
.i.fixed.duplex = 0,
};
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
static struct fs_platform_info mpc8xx_fec_pdata[] = {
{
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
static struct fs_platform_info mpc8xx_enet_pdata[] = {
[fsid_fec1] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.use_napi = 1,
.napi_weight = 17,
.phy_addr = 15,
.phy_irq = -1,
.init_ioports = setup_fec1_ioports,
.use_rmii = 0,
.bus_id = "0:0f",
.has_phy = 1,
},
[fsid_scc1] = {
.rx_ring = 64,
.tx_ring = 8,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.bus_info = &fec_mii_bus_info,
}
};
static struct fs_platform_info mpc8xx_scc_pdata = {
.rx_ring = 64,
.tx_ring = 8,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.phy_addr = -1,
.phy_irq = -1,
.bus_info = &scc_mii_bus_info,
.init_ioports = setup_scc1_ioports,
.bus_id = "fixed@100:1",
},
};
static struct fs_uart_platform_info mpc866_uart_pdata[] = {
@ -207,63 +194,6 @@ static void setup_scc1_ioports(void)
}
static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
struct fs_platform_info *fpi = pdev->dev.platform_data;
volatile cpm8xx_t *cp;
bd_t *bd = (bd_t *) __res;
char *e;
int i;
/* Get pointer to Communication Processor */
cp = cpmp;
switch (fs_no) {
case fsid_fec1:
fpi = &mpc8xx_fec_pdata[0];
fpi->init_ioports = &setup_fec1_ioports;
break;
case fsid_scc1:
fpi = &mpc8xx_scc_pdata;
fpi->init_ioports = &setup_scc1_ioports;
break;
default:
printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
return;
}
pdev->dev.platform_data = fpi;
fpi->fs_no = fs_no;
e = (unsigned char *)&bd->bi_enetaddr;
for (i = 0; i < 6; i++)
fpi->macaddr[i] = *e++;
fpi->macaddr[5 - pdev->id]++;
}
static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for FEC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
return;
mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
}
static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for SCC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
return;
mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
@ -315,6 +245,56 @@ static void setup_smc2_ioports(void)
}
static int ma_count = 0;
static void mpc866ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
struct fs_platform_info *fpi;
volatile cpm8xx_t *cp;
bd_t *bd = (bd_t *) __res;
char *e;
int i;
/* Get pointer to Communication Processor */
cp = cpmp;
if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
return;
}
fpi = &mpc8xx_enet_pdata[fs_no];
fpi->fs_no = fs_no;
pdev->dev.platform_data = fpi;
e = (unsigned char *)&bd->bi_enetaddr;
for (i = 0; i < 6; i++)
fpi->macaddr[i] = *e++;
fpi->macaddr[5] += ma_count++;
}
static void mpc866ads_fixup_fec_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for FEC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-fec")))
return;
mpc866ads_fixup_enet_pdata(pdev, fsid_fec1 + pdev->id - 1);
}
static void mpc866ads_fixup_scc_enet_pdata(struct platform_device *pdev,
int idx)
{
/* This is for SCC devices only */
if (!pdev || !pdev->name || (!strstr(pdev->name, "fsl-cpm-scc")))
return;
mpc866ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
static void __init mpc866ads_fixup_uart_pdata(struct platform_device *pdev,
int idx)
{
@ -359,6 +339,9 @@ static int mpc866ads_platform_notify(struct device *dev)
int __init mpc866ads_init(void)
{
bd_t *bd = (bd_t *) __res;
struct fs_mii_fec_platform_info* fmpi;
printk(KERN_NOTICE "mpc866ads: Init\n");
platform_notify = mpc866ads_platform_notify;
@ -366,11 +349,20 @@ int __init mpc866ads_init(void)
ppc_sys_device_initfunc();
ppc_sys_device_disable_all();
#ifdef MPC8xx_SECOND_ETH_SCC1
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC1
ppc_sys_device_enable(MPC8xx_CPM_SCC1);
#endif
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
ppc_sys_device_enable(MPC8xx_MDIO_FEC);
fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
&mpc8xx_mdio_fec_pdata;
fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
/* No PHY interrupt line here */
fmpi->irq[0xf] = -1;
/* Since either of the uarts could be used as console, they need to ready */
#ifdef CONFIG_SERIAL_CPM_SMC1
ppc_sys_device_enable(MPC8xx_CPM_SMC1);
@ -381,6 +373,14 @@ int __init mpc866ads_init(void)
ppc_sys_device_enable(MPC8xx_CPM_SMC2);
ppc_sys_device_setfunc(MPC8xx_CPM_SMC2, PPC_SYS_FUNC_UART);
#endif
ppc_sys_device_enable(MPC8xx_MDIO_FEC);
fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
&mpc8xx_mdio_fec_pdata;
fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
/* No PHY interrupt line here */
fmpi->irq[0xf] = -1;
return 0;
}

175
arch/ppc/platforms/mpc885ads_setup.c
Просмотреть файл

@ -38,7 +38,10 @@ extern unsigned char __res[];
static void setup_smc1_ioports(void);
static void setup_smc2_ioports(void);
static void __init mpc885ads_scc_phy_init(char);
static struct fs_mii_fec_platform_info mpc8xx_mdio_fec_pdata;
static void setup_fec1_ioports(void);
static void setup_fec2_ioports(void);
static void setup_scc3_ioports(void);
static struct fs_uart_platform_info mpc885_uart_pdata[] = {
[fsid_smc1_uart] = {
@ -61,23 +64,8 @@ static struct fs_uart_platform_info mpc885_uart_pdata[] = {
},
};
static struct fs_mii_bus_info fec_mii_bus_info = {
.method = fsmii_fec,
.id = 0,
};
static struct fs_mii_bus_info scc_mii_bus_info = {
#ifdef CONFIG_SCC_ENET_8xx_FIXED
.method = fsmii_fixed,
#else
.method = fsmii_fec,
#endif
.id = 0,
};
static struct fs_platform_info mpc8xx_fec_pdata[] = {
{
static struct fs_platform_info mpc8xx_enet_pdata[] = {
[fsid_fec1] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
@ -85,11 +73,12 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = {
.use_napi = 1,
.napi_weight = 17,
.phy_addr = 0,
.phy_irq = SIU_IRQ7,
.init_ioports = setup_fec1_ioports,
.bus_info = &fec_mii_bus_info,
}, {
.bus_id = "0:00",
.has_phy = 1,
},
[fsid_fec2] = {
.rx_ring = 128,
.tx_ring = 16,
.rx_copybreak = 240,
@ -97,35 +86,32 @@ static struct fs_platform_info mpc8xx_fec_pdata[] = {
.use_napi = 1,
.napi_weight = 17,
.phy_addr = 1,
.phy_irq = SIU_IRQ7,
.init_ioports = setup_fec2_ioports,
.bus_info = &fec_mii_bus_info,
}
};
.bus_id = "0:01",
.has_phy = 1,
},
[fsid_scc3] = {
.rx_ring = 64,
.tx_ring = 8,
.rx_copybreak = 240,
static struct fs_platform_info mpc8xx_scc_pdata = {
.rx_ring = 64,
.tx_ring = 8,
.rx_copybreak = 240,
.use_napi = 1,
.napi_weight = 17,
.use_napi = 1,
.napi_weight = 17,
.phy_addr = 2,
#ifdef CONFIG_MPC8xx_SCC_ENET_FIXED
.phy_irq = -1,
.init_ioports = setup_scc3_ioports,
#ifdef CONFIG_FIXED_MII_10_FDX
.bus_id = "fixed@100:1",
#else
.phy_irq = SIU_IRQ7,
#endif
.bus_info = &scc_mii_bus_info,
.bus_id = "0:02",
#endif
},
};
void __init board_init(void)
{
volatile cpm8xx_t *cp = cpmp;
unsigned int *bcsr_io;
cpm8xx_t *cp = cpmp;
unsigned int *bcsr_io;
#ifdef CONFIG_FS_ENET
immap_t *immap = (immap_t *) IMAP_ADDR;
@ -164,6 +150,14 @@ void __init board_init(void)
/* use MDC for MII (common) */
setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
bcsr_io = ioremap(BCSR5, sizeof(unsigned long));
clrbits32(bcsr_io,BCSR5_MII1_EN);
clrbits32(bcsr_io,BCSR5_MII1_RST);
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2
clrbits32(bcsr_io,BCSR5_MII2_EN);
clrbits32(bcsr_io,BCSR5_MII2_RST);
#endif
iounmap(bcsr_io);
#endif
}
@ -194,8 +188,8 @@ static void setup_fec2_ioports(void)
/* configure FEC2 pins */
setbits32(&immap->im_cpm.cp_pepar, 0x0003fffc);
setbits32(&immap->im_cpm.cp_pedir, 0x0003fffc);
setbits32(&immap->im_cpm.cp_peso, 0x00037800);
clrbits32(&immap->im_cpm.cp_peso, 0x000087fc);
setbits32(&immap->im_cpm.cp_peso, 0x00037800);
clrbits32(&immap->im_cpm.cp_cptr, 0x00000080);
}
@ -213,6 +207,8 @@ static void setup_scc3_ioports(void)
/* Enable the PHY.
*/
clrbits32(bcsr_io+4, BCSR4_ETH10_RST);
udelay(1000);
setbits32(bcsr_io+4, BCSR4_ETH10_RST);
/* Configure port A pins for Txd and Rxd.
*/
@ -254,37 +250,38 @@ static void setup_scc3_ioports(void)
clrbits32(&immap->im_cpm.cp_pedir, PE_ENET_TENA);
setbits32(&immap->im_cpm.cp_peso, PE_ENET_TENA);
setbits32(bcsr_io+1, BCSR1_ETHEN);
setbits32(bcsr_io+4, BCSR1_ETHEN);
iounmap(bcsr_io);
}
static int mac_count = 0;
static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
{
struct fs_platform_info *fpi = pdev->dev.platform_data;
volatile cpm8xx_t *cp;
struct fs_platform_info *fpi;
bd_t *bd = (bd_t *) __res;
char *e;
int i;
/* Get pointer to Communication Processor */
cp = cpmp;
if(fs_no > ARRAY_SIZE(mpc8xx_enet_pdata)) {
printk(KERN_ERR"No network-suitable #%d device on bus", fs_no);
return;
}
fpi = &mpc8xx_enet_pdata[fs_no];
switch (fs_no) {
case fsid_fec1:
fpi = &mpc8xx_fec_pdata[0];
fpi->init_ioports = &setup_fec1_ioports;
break;
case fsid_fec2:
fpi = &mpc8xx_fec_pdata[1];
fpi->init_ioports = &setup_fec2_ioports;
break;
case fsid_scc3:
fpi = &mpc8xx_scc_pdata;
fpi->init_ioports = &setup_scc3_ioports;
mpc885ads_scc_phy_init(fpi->phy_addr);
break;
default:
printk(KERN_WARNING"Device %s is not supported!\n", pdev->name);
printk(KERN_WARNING "Device %s is not supported!\n", pdev->name);
return;
}
@ -295,7 +292,7 @@ static void mpc885ads_fixup_enet_pdata(struct platform_device *pdev, int fs_no)
for (i = 0; i < 6; i++)
fpi->macaddr[i] = *e++;
fpi->macaddr[5 - pdev->id]++;
fpi->macaddr[5] += mac_count++;
}
@ -318,58 +315,6 @@ static void __init mpc885ads_fixup_scc_enet_pdata(struct platform_device *pdev,
mpc885ads_fixup_enet_pdata(pdev, fsid_scc1 + pdev->id - 1);
}
/* SCC ethernet controller does not have MII management channel. FEC1 MII
* channel is used to communicate with the 10Mbit PHY.
*/
#define MII_ECNTRL_PINMUX 0x4
#define FEC_ECNTRL_PINMUX 0x00000004
#define FEC_RCNTRL_MII_MODE 0x00000004
/* Make MII read/write commands.
*/
#define mk_mii_write(REG, VAL, PHY_ADDR) (0x50020000 | (((REG) & 0x1f) << 18) | \
((VAL) & 0xffff) | ((PHY_ADDR) << 23))
static void mpc885ads_scc_phy_init(char phy_addr)
{
volatile immap_t *immap;
volatile fec_t *fecp;
bd_t *bd;
bd = (bd_t *) __res;
immap = (immap_t *) IMAP_ADDR; /* pointer to internal registers */
fecp = &(immap->im_cpm.cp_fec);
/* Enable MII pins of the FEC1
*/
setbits16(&immap->im_ioport.iop_pdpar, 0x0080);
clrbits16(&immap->im_ioport.iop_pddir, 0x0080);
/* Set MII speed to 2.5 MHz
*/
out_be32(&fecp->fec_mii_speed,
((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1);
/* Enable FEC pin MUX
*/
setbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
setbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
out_be32(&fecp->fec_mii_data,
mk_mii_write(MII_BMCR, BMCR_ISOLATE, phy_addr));
udelay(100);
out_be32(&fecp->fec_mii_data,
mk_mii_write(MII_ADVERTISE,
ADVERTISE_10HALF | ADVERTISE_CSMA, phy_addr));
udelay(100);
/* Disable FEC MII settings
*/
clrbits32(&fecp->fec_ecntrl, MII_ECNTRL_PINMUX);
clrbits32(&fecp->fec_r_cntrl, FEC_RCNTRL_MII_MODE);
out_be32(&fecp->fec_mii_speed, 0);
}
static void setup_smc1_ioports(void)
{
immap_t *immap = (immap_t *) IMAP_ADDR;
@ -462,6 +407,9 @@ static int mpc885ads_platform_notify(struct device *dev)
int __init mpc885ads_init(void)
{
struct fs_mii_fec_platform_info* fmpi;
bd_t *bd = (bd_t *) __res;
printk(KERN_NOTICE "mpc885ads: Init\n");
platform_notify = mpc885ads_platform_notify;
@ -471,8 +419,17 @@ int __init mpc885ads_init(void)
ppc_sys_device_enable(MPC8xx_CPM_FEC1);
ppc_sys_device_enable(MPC8xx_MDIO_FEC);
fmpi = ppc_sys_platform_devices[MPC8xx_MDIO_FEC].dev.platform_data =
&mpc8xx_mdio_fec_pdata;
fmpi->mii_speed = ((((bd->bi_intfreq + 4999999) / 2500000) / 2) & 0x3F) << 1;
/* No PHY interrupt line here */
fmpi->irq[0xf] = SIU_IRQ7;
#ifdef CONFIG_MPC8xx_SECOND_ETH_SCC3
ppc_sys_device_enable(MPC8xx_CPM_SCC1);
ppc_sys_device_enable(MPC8xx_CPM_SCC3);
#endif
#ifdef CONFIG_MPC8xx_SECOND_ETH_FEC2

82
arch/ppc/platforms/pq2ads_pd.h
Просмотреть файл

@ -29,86 +29,4 @@
#define F3_RXCLK 13
#define F3_TXCLK 14
/* Automatically generates register configurations */
#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
#define PC_F1RXCLK PC_CLK(F1_RXCLK)
#define PC_F1TXCLK PC_CLK(F1_TXCLK)
#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
#define CMX1_CLK_MASK ((uint)0xff000000)
#define PC_F2RXCLK PC_CLK(F2_RXCLK)
#define PC_F2TXCLK PC_CLK(F2_TXCLK)
#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
#define CMX2_CLK_MASK ((uint)0x00ff0000)
#define PC_F3RXCLK PC_CLK(F3_RXCLK)
#define PC_F3TXCLK PC_CLK(F3_TXCLK)
#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
#define CMX3_CLK_MASK ((uint)0x0000ff00)
/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PA1_COL 0x00000001U
#define PA1_CRS 0x00000002U
#define PA1_TXER 0x00000004U
#define PA1_TXEN 0x00000008U
#define PA1_RXDV 0x00000010U
#define PA1_RXER 0x00000020U
#define PA1_TXDAT 0x00003c00U
#define PA1_RXDAT 0x0003c000U
#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
PA1_RXDV | PA1_RXER)
#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PB2_TXER 0x00000001U
#define PB2_RXDV 0x00000002U
#define PB2_TXEN 0x00000004U
#define PB2_RXER 0x00000008U
#define PB2_COL 0x00000010U
#define PB2_CRS 0x00000020U
#define PB2_TXDAT 0x000003c0U
#define PB2_RXDAT 0x00003c00U
#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
PB2_RXER | PB2_RXDV | PB2_TXER)
#define PB2_PSORB1 (PB2_TXEN)
#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PB3_RXDV 0x00004000U
#define PB3_RXER 0x00008000U
#define PB3_TXER 0x00010000U
#define PB3_TXEN 0x00020000U
#define PB3_COL 0x00040000U
#define PB3_CRS 0x00080000U
#define PB3_TXDAT 0x0f000000U
#define PB3_RXDAT 0x00f00000U
#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
#define PB3_PSORB1 0
#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
#endif

89
arch/ppc/syslib/mpc85xx_devices.c
Просмотреть файл

@ -16,9 +16,11 @@
#include <linux/device.h>
#include <linux/serial_8250.h>
#include <linux/fsl_devices.h>
#include <linux/fs_enet_pd.h>
#include <asm/mpc85xx.h>
#include <asm/irq.h>
#include <asm/ppc_sys.h>
#include <asm/cpm2.h>
/* We use offsets for IORESOURCE_MEM since we do not know at compile time
* what CCSRBAR is, will get fixed up by mach_mpc85xx_fixup
@ -82,6 +84,60 @@ static struct fsl_i2c_platform_data mpc85xx_fsl_i2c2_pdata = {
.device_flags = FSL_I2C_DEV_SEPARATE_DFSRR,
};
static struct fs_platform_info mpc85xx_fcc1_pdata = {
.fs_no = fsid_fcc1,
.cp_page = CPM_CR_FCC1_PAGE,
.cp_block = CPM_CR_FCC1_SBLOCK,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.clk_mask = CMX1_CLK_MASK,
.clk_route = CMX1_CLK_ROUTE,
.clk_trx = (PC_F1RXCLK | PC_F1TXCLK),
.mem_offset = FCC1_MEM_OFFSET,
};
static struct fs_platform_info mpc85xx_fcc2_pdata = {
.fs_no = fsid_fcc2,
.cp_page = CPM_CR_FCC2_PAGE,
.cp_block = CPM_CR_FCC2_SBLOCK,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.clk_mask = CMX2_CLK_MASK,
.clk_route = CMX2_CLK_ROUTE,
.clk_trx = (PC_F2RXCLK | PC_F2TXCLK),
.mem_offset = FCC2_MEM_OFFSET,
};
static struct fs_platform_info mpc85xx_fcc3_pdata = {
.fs_no = fsid_fcc3,
.cp_page = CPM_CR_FCC3_PAGE,
.cp_block = CPM_CR_FCC3_SBLOCK,
.rx_ring = 32,
.tx_ring = 32,
.rx_copybreak = 240,
.use_napi = 0,
.napi_weight = 17,
.clk_mask = CMX3_CLK_MASK,
.clk_route = CMX3_CLK_ROUTE,
.clk_trx = (PC_F3RXCLK | PC_F3TXCLK),
.mem_offset = FCC3_MEM_OFFSET,
};
static struct plat_serial8250_port serial_platform_data[] = {
[0] = {
.mapbase = 0x4500,
@ -318,18 +374,27 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC85xx_CPM_FCC1] = {
.name = "fsl-cpm-fcc",
.id = 1,
.num_resources = 3,
.num_resources = 4,
.dev.platform_data = &mpc85xx_fcc1_pdata,
.resource = (struct resource[]) {
{
.name = "fcc_regs",
.start = 0x91300,
.end = 0x9131F,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_regs_c",
.start = 0x91380,
.end = 0x9139F,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_pram",
.start = 0x88400,
.end = 0x884ff,
.flags = IORESOURCE_MEM,
},
{
.start = SIU_INT_FCC1,
.end = SIU_INT_FCC1,
@ -340,18 +405,27 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC85xx_CPM_FCC2] = {
.name = "fsl-cpm-fcc",
.id = 2,
.num_resources = 3,
.num_resources = 4,
.dev.platform_data = &mpc85xx_fcc2_pdata,
.resource = (struct resource[]) {
{
.name = "fcc_regs",
.start = 0x91320,
.end = 0x9133F,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_regs_c",
.start = 0x913A0,
.end = 0x913CF,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_pram",
.start = 0x88500,
.end = 0x885ff,
.flags = IORESOURCE_MEM,
},
{
.start = SIU_INT_FCC2,
.end = SIU_INT_FCC2,
@ -362,18 +436,27 @@ struct platform_device ppc_sys_platform_devices[] = {
[MPC85xx_CPM_FCC3] = {
.name = "fsl-cpm-fcc",
.id = 3,
.num_resources = 3,
.num_resources = 4,
.dev.platform_data = &mpc85xx_fcc3_pdata,
.resource = (struct resource[]) {
{
.name = "fcc_regs",
.start = 0x91340,
.end = 0x9135F,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_regs_c",
.start = 0x913D0,
.end = 0x913FF,
.flags = IORESOURCE_MEM,
},
{
.name = "fcc_pram",
.start = 0x88600,
.end = 0x886ff,
.flags = IORESOURCE_MEM,
},
{
.start = SIU_INT_FCC3,
.end = SIU_INT_FCC3,

8
arch/ppc/syslib/mpc8xx_devices.c
Просмотреть файл

@ -218,6 +218,14 @@ struct platform_device ppc_sys_platform_devices[] = {
},
},
},
[MPC8xx_MDIO_FEC] = {
.name = "fsl-cpm-fec-mdio",
.id = 0,
.num_resources = 0,
},
};
static int __init mach_mpc8xx_fixup(struct platform_device *pdev)

6
arch/ppc/syslib/mpc8xx_sys.c
Просмотреть файл

@ -22,7 +22,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "MPC86X",
.mask = 0xFFFFFFFF,
.value = 0x00000000,
.num_devices = 7,
.num_devices = 8,
.device_list = (enum ppc_sys_devices[])
{
MPC8xx_CPM_FEC1,
@ -32,13 +32,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC8xx_CPM_SCC4,
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
MPC8xx_MDIO_FEC,
},
},
{
.ppc_sys_name = "MPC885",
.mask = 0xFFFFFFFF,
.value = 0x00000000,
.num_devices = 8,
.num_devices = 9,
.device_list = (enum ppc_sys_devices[])
{
MPC8xx_CPM_FEC1,
@ -49,6 +50,7 @@ struct ppc_sys_spec ppc_sys_specs[] = {
MPC8xx_CPM_SCC4,
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
MPC8xx_MDIO_FEC,
},
},
{ /* default match */

5
arch/ppc/syslib/pq2_devices.c
Просмотреть файл

@ -369,6 +369,11 @@ struct platform_device ppc_sys_platform_devices[] = {
},
},
},
[MPC82xx_MDIO_BB] = {
.name = "fsl-bb-mdio",
.id = 0,
.num_resources = 0,
},
};
static int __init mach_mpc82xx_fixup(struct platform_device *pdev)

3
arch/ppc/syslib/pq2_sys.c
Просмотреть файл

@ -139,13 +139,14 @@ struct ppc_sys_spec ppc_sys_specs[] = {
.ppc_sys_name = "8272",
.mask = 0x0000ff00,
.value = 0x00000c00,
.num_devices = 12,
.num_devices = 13,
.device_list = (enum ppc_sys_devices[])
{
MPC82xx_CPM_FCC1, MPC82xx_CPM_FCC2, MPC82xx_CPM_SCC1,
MPC82xx_CPM_SCC2, MPC82xx_CPM_SCC3, MPC82xx_CPM_SCC4,
MPC82xx_CPM_SMC1, MPC82xx_CPM_SMC2, MPC82xx_CPM_SPI,
MPC82xx_CPM_I2C, MPC82xx_CPM_USB, MPC82xx_SEC1,
MPC82xx_MDIO_BB,
},
},
/* below is a list of the 8280 family of processors */

95
include/asm-ppc/cpm2.h
Просмотреть файл

@ -1093,5 +1093,100 @@ typedef struct im_idma {
#define FCC_PSMR_RMII ((uint)0x00020000) /* Use RMII interface */
/* FCC iop & clock configuration. BSP code is responsible to define Fx_RXCLK & Fx_TXCLK
* in order to use clock-computing stuff below for the FCC x
*/
/* Automatically generates register configurations */
#define PC_CLK(x) ((uint)(1<<(x-1))) /* FCC CLK I/O ports */
#define CMXFCR_RF1CS(x) ((uint)((x-5)<<27)) /* FCC1 Receive Clock Source */
#define CMXFCR_TF1CS(x) ((uint)((x-5)<<24)) /* FCC1 Transmit Clock Source */
#define CMXFCR_RF2CS(x) ((uint)((x-9)<<19)) /* FCC2 Receive Clock Source */
#define CMXFCR_TF2CS(x) ((uint)((x-9)<<16)) /* FCC2 Transmit Clock Source */
#define CMXFCR_RF3CS(x) ((uint)((x-9)<<11)) /* FCC3 Receive Clock Source */
#define CMXFCR_TF3CS(x) ((uint)((x-9)<<8)) /* FCC3 Transmit Clock Source */
#define PC_F1RXCLK PC_CLK(F1_RXCLK)
#define PC_F1TXCLK PC_CLK(F1_TXCLK)
#define CMX1_CLK_ROUTE (CMXFCR_RF1CS(F1_RXCLK) | CMXFCR_TF1CS(F1_TXCLK))
#define CMX1_CLK_MASK ((uint)0xff000000)
#define PC_F2RXCLK PC_CLK(F2_RXCLK)
#define PC_F2TXCLK PC_CLK(F2_TXCLK)
#define CMX2_CLK_ROUTE (CMXFCR_RF2CS(F2_RXCLK) | CMXFCR_TF2CS(F2_TXCLK))
#define CMX2_CLK_MASK ((uint)0x00ff0000)
#define PC_F3RXCLK PC_CLK(F3_RXCLK)
#define PC_F3TXCLK PC_CLK(F3_TXCLK)
#define CMX3_CLK_ROUTE (CMXFCR_RF3CS(F3_RXCLK) | CMXFCR_TF3CS(F3_TXCLK))
#define CMX3_CLK_MASK ((uint)0x0000ff00)
#define CPMUX_CLK_MASK (CMX3_CLK_MASK | CMX2_CLK_MASK)
#define CPMUX_CLK_ROUTE (CMX3_CLK_ROUTE | CMX2_CLK_ROUTE)
#define CLK_TRX (PC_F3TXCLK | PC_F3RXCLK | PC_F2TXCLK | PC_F2RXCLK)
/* I/O Pin assignment for FCC1. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PA1_COL 0x00000001U
#define PA1_CRS 0x00000002U
#define PA1_TXER 0x00000004U
#define PA1_TXEN 0x00000008U
#define PA1_RXDV 0x00000010U
#define PA1_RXER 0x00000020U
#define PA1_TXDAT 0x00003c00U
#define PA1_RXDAT 0x0003c000U
#define PA1_PSORA0 (PA1_RXDAT | PA1_TXDAT)
#define PA1_PSORA1 (PA1_COL | PA1_CRS | PA1_TXER | PA1_TXEN | \
PA1_RXDV | PA1_RXER)
#define PA1_DIRA0 (PA1_RXDAT | PA1_CRS | PA1_COL | PA1_RXER | PA1_RXDV)
#define PA1_DIRA1 (PA1_TXDAT | PA1_TXEN | PA1_TXER)
/* I/O Pin assignment for FCC2. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PB2_TXER 0x00000001U
#define PB2_RXDV 0x00000002U
#define PB2_TXEN 0x00000004U
#define PB2_RXER 0x00000008U
#define PB2_COL 0x00000010U
#define PB2_CRS 0x00000020U
#define PB2_TXDAT 0x000003c0U
#define PB2_RXDAT 0x00003c00U
#define PB2_PSORB0 (PB2_RXDAT | PB2_TXDAT | PB2_CRS | PB2_COL | \
PB2_RXER | PB2_RXDV | PB2_TXER)
#define PB2_PSORB1 (PB2_TXEN)
#define PB2_DIRB0 (PB2_RXDAT | PB2_CRS | PB2_COL | PB2_RXER | PB2_RXDV)
#define PB2_DIRB1 (PB2_TXDAT | PB2_TXEN | PB2_TXER)
/* I/O Pin assignment for FCC3. I don't yet know the best way to do this,
* but there is little variation among the choices.
*/
#define PB3_RXDV 0x00004000U
#define PB3_RXER 0x00008000U
#define PB3_TXER 0x00010000U
#define PB3_TXEN 0x00020000U
#define PB3_COL 0x00040000U
#define PB3_CRS 0x00080000U
#define PB3_TXDAT 0x0f000000U
#define PC3_TXDAT 0x00000010U
#define PB3_RXDAT 0x00f00000U
#define PB3_PSORB0 (PB3_RXDAT | PB3_TXDAT | PB3_CRS | PB3_COL | \
PB3_RXER | PB3_RXDV | PB3_TXER | PB3_TXEN)
#define PB3_PSORB1 0
#define PB3_DIRB0 (PB3_RXDAT | PB3_CRS | PB3_COL | PB3_RXER | PB3_RXDV)
#define PB3_DIRB1 (PB3_TXDAT | PB3_TXEN | PB3_TXER)
#define PC3_DIRC1 (PC3_TXDAT)
/* Handy macro to specify mem for FCCs*/
#define FCC_MEM_OFFSET(x) (CPM_FCC_SPECIAL_BASE + (x*128))
#define FCC1_MEM_OFFSET FCC_MEM_OFFSET(0)
#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(1)
#define FCC2_MEM_OFFSET FCC_MEM_OFFSET(2)
#endif /* __CPM2__ */
#endif /* __KERNEL__ */

1
include/asm-ppc/mpc8260.h
Просмотреть файл

@ -82,6 +82,7 @@ enum ppc_sys_devices {
MPC82xx_CPM_SMC2,
MPC82xx_CPM_USB,
MPC82xx_SEC1,
MPC82xx_MDIO_BB,
NUM_PPC_SYS_DEVS,
};

1
include/asm-ppc/mpc8xx.h
Просмотреть файл

@ -110,6 +110,7 @@ enum ppc_sys_devices {
MPC8xx_CPM_SMC1,
MPC8xx_CPM_SMC2,
MPC8xx_CPM_USB,
MPC8xx_MDIO_FEC,
NUM_PPC_SYS_DEVS,
};

50
include/linux/fs_enet_pd.h
Просмотреть файл

@ -69,34 +69,21 @@ enum fs_ioport {
fsiop_porte,
};
struct fs_mii_bus_info {
int method; /* mii method */
int id; /* the id of the mii_bus */
int disable_aneg; /* if the controller needs to negothiate speed & duplex */
int lpa; /* the default board-specific vallues will be applied otherwise */
union {
struct {
int duplex;
int speed;
} fixed;
struct {
/* nothing */
} fec;
struct {
/* nothing */
} scc;
struct {
int mdio_port; /* port & bit for MDIO */
int mdio_bit;
int mdc_port; /* port & bit for MDC */
int mdc_bit;
int delay; /* delay in us */
} bitbang;
} i;
struct fs_mii_bit {
u32 offset;
u8 bit;
u8 polarity;
};
struct fs_mii_bb_platform_info {
struct fs_mii_bit mdio_dir;
struct fs_mii_bit mdio_dat;
struct fs_mii_bit mdc_dat;
int mdio_port; /* port & bit for MDIO */
int mdio_bit;
int mdc_port; /* port & bit for MDC */
int mdc_bit;
int delay; /* delay in us */
int irq[32]; /* irqs per phy's */
};
struct fs_platform_info {
@ -119,6 +106,7 @@ struct fs_platform_info {
u32 device_flags;
int phy_addr; /* the phy address (-1 no phy) */
const char* bus_id;
int phy_irq; /* the phy irq (if it exists) */
const struct fs_mii_bus_info *bus_info;
@ -130,6 +118,10 @@ struct fs_platform_info {
int napi_weight; /* NAPI weight */
int use_rmii; /* use RMII mode */
int has_phy; /* if the network is phy container as well...*/
};
struct fs_mii_fec_platform_info {
u32 irq[32];
u32 mii_speed;
};
#endif