net: amd-xgbe: Alter the port speed bit range

Newer generation Hardware uses the slightly different
port speed bit widths, so alter the existing port speed
bit range to extend support to the newer generation hardware
while maintaining the backward compatibility with older
generation hardware.

The previously reserved bits are now being used which
then requires the adjustment to the BIT values, e.g.:

Before:
   PORT_PROPERTY_0[22:21] - Reserved
   PORT_PROPERTY_0[26:23] - Supported Speeds

After:
   PORT_PROPERTY_0[21] - Reserved
   PORT_PROPERTY_0[26:22] - Supported Speeds

To make this backwards compatible, the existing BIT
definitions for the port speeds are incremented by one
to maintain the original position.

Co-developed-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
Signed-off-by: Raju Rangoju <Raju.Rangoju@amd.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

drivers/net/ethernet/amd/xgbe/xgbe-common.h

@@ -1032,8 +1032,8 @@
 #define XP_PROP_0_PORT_ID_WIDTH			8
 #define XP_PROP_0_PORT_MODE_INDEX		8
 #define XP_PROP_0_PORT_MODE_WIDTH		4
-#define XP_PROP_0_PORT_SPEEDS_INDEX		23
-#define XP_PROP_0_PORT_SPEEDS_WIDTH		4
+#define XP_PROP_0_PORT_SPEEDS_INDEX		22
+#define XP_PROP_0_PORT_SPEEDS_WIDTH		5
 #define XP_PROP_1_MAX_RX_DMA_INDEX		24
 #define XP_PROP_1_MAX_RX_DMA_WIDTH		5
 #define XP_PROP_1_MAX_RX_QUEUES_INDEX		8

drivers/net/ethernet/amd/xgbe/xgbe-phy-v2.c

@@ -124,10 +124,10 @@
 #include "xgbe.h"
 #include "xgbe-common.h"
 
-#define XGBE_PHY_PORT_SPEED_100		BIT(0)
-#define XGBE_PHY_PORT_SPEED_1000	BIT(1)
-#define XGBE_PHY_PORT_SPEED_2500	BIT(2)
-#define XGBE_PHY_PORT_SPEED_10000	BIT(3)
+#define XGBE_PHY_PORT_SPEED_100		BIT(1)
+#define XGBE_PHY_PORT_SPEED_1000	BIT(2)
+#define XGBE_PHY_PORT_SPEED_2500	BIT(3)
+#define XGBE_PHY_PORT_SPEED_10000	BIT(4)
 
 #define XGBE_MUTEX_RELEASE		0x80000000