ASoC: simplify the SSP DMA parameters settings by run-time generation

The SSP DMA parameters can actually be easily generated at run-time since
they are almost similar except for the FIFO width and direction. Another
benefit is the re-use of information from 'struct ssp_device', like SSDR
physical FIFO address and DRCMR register index for both directions.

Signed-off-by: Eric Miao <eric.miao@marvell.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Reviewed-by: pHilipp Zabel <philipp.zabel@gmail.com>
This commit is contained in:
Eric Miao 2009-04-23 17:05:38 +08:00 коммит произвёл Mark Brown
Родитель 1a787e7ad2
Коммит 2d7e71fa23
1 изменённых файлов: 43 добавлений и 160 удалений

Просмотреть файл

@ -50,139 +50,6 @@ struct ssp_priv {
#endif
};
#define PXA2xx_SSP1_BASE 0x41000000
#define PXA27x_SSP2_BASE 0x41700000
#define PXA27x_SSP3_BASE 0x41900000
#define PXA3xx_SSP4_BASE 0x41a00000
static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_out = {
.name = "SSP1 PCM Mono out",
.dev_addr = PXA2xx_SSP1_BASE + SSDR,
.drcmr = &DRCMR(14),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_mono_in = {
.name = "SSP1 PCM Mono in",
.dev_addr = PXA2xx_SSP1_BASE + SSDR,
.drcmr = &DRCMR(13),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_out = {
.name = "SSP1 PCM Stereo out",
.dev_addr = PXA2xx_SSP1_BASE + SSDR,
.drcmr = &DRCMR(14),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp1_pcm_stereo_in = {
.name = "SSP1 PCM Stereo in",
.dev_addr = PXA2xx_SSP1_BASE + SSDR,
.drcmr = &DRCMR(13),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_out = {
.name = "SSP2 PCM Mono out",
.dev_addr = PXA27x_SSP2_BASE + SSDR,
.drcmr = &DRCMR(16),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_mono_in = {
.name = "SSP2 PCM Mono in",
.dev_addr = PXA27x_SSP2_BASE + SSDR,
.drcmr = &DRCMR(15),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_out = {
.name = "SSP2 PCM Stereo out",
.dev_addr = PXA27x_SSP2_BASE + SSDR,
.drcmr = &DRCMR(16),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp2_pcm_stereo_in = {
.name = "SSP2 PCM Stereo in",
.dev_addr = PXA27x_SSP2_BASE + SSDR,
.drcmr = &DRCMR(15),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_out = {
.name = "SSP3 PCM Mono out",
.dev_addr = PXA27x_SSP3_BASE + SSDR,
.drcmr = &DRCMR(67),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_mono_in = {
.name = "SSP3 PCM Mono in",
.dev_addr = PXA27x_SSP3_BASE + SSDR,
.drcmr = &DRCMR(66),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_out = {
.name = "SSP3 PCM Stereo out",
.dev_addr = PXA27x_SSP3_BASE + SSDR,
.drcmr = &DRCMR(67),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp3_pcm_stereo_in = {
.name = "SSP3 PCM Stereo in",
.dev_addr = PXA27x_SSP3_BASE + SSDR,
.drcmr = &DRCMR(66),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_out = {
.name = "SSP4 PCM Mono out",
.dev_addr = PXA3xx_SSP4_BASE + SSDR,
.drcmr = &DRCMR(67),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_mono_in = {
.name = "SSP4 PCM Mono in",
.dev_addr = PXA3xx_SSP4_BASE + SSDR,
.drcmr = &DRCMR(66),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH2,
};
static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_out = {
.name = "SSP4 PCM Stereo out",
.dev_addr = PXA3xx_SSP4_BASE + SSDR,
.drcmr = &DRCMR(67),
.dcmd = DCMD_INCSRCADDR | DCMD_FLOWTRG |
DCMD_BURST16 | DCMD_WIDTH4,
};
static struct pxa2xx_pcm_dma_params pxa_ssp4_pcm_stereo_in = {
.name = "SSP4 PCM Stereo in",
.dev_addr = PXA3xx_SSP4_BASE + SSDR,
.drcmr = &DRCMR(66),
.dcmd = DCMD_INCTRGADDR | DCMD_FLOWSRC |
DCMD_BURST16 | DCMD_WIDTH4,
};
static void dump_registers(struct ssp_device *ssp)
{
dev_dbg(&ssp->pdev->dev, "SSCR0 0x%08x SSCR1 0x%08x SSTO 0x%08x\n",
@ -194,25 +61,33 @@ static void dump_registers(struct ssp_device *ssp)
ssp_read_reg(ssp, SSACD));
}
static struct pxa2xx_pcm_dma_params *ssp_dma_params[4][4] = {
{
&pxa_ssp1_pcm_mono_out, &pxa_ssp1_pcm_mono_in,
&pxa_ssp1_pcm_stereo_out, &pxa_ssp1_pcm_stereo_in,
},
{
&pxa_ssp2_pcm_mono_out, &pxa_ssp2_pcm_mono_in,
&pxa_ssp2_pcm_stereo_out, &pxa_ssp2_pcm_stereo_in,
},
{
&pxa_ssp3_pcm_mono_out, &pxa_ssp3_pcm_mono_in,
&pxa_ssp3_pcm_stereo_out, &pxa_ssp3_pcm_stereo_in,
},
{
&pxa_ssp4_pcm_mono_out, &pxa_ssp4_pcm_mono_in,
&pxa_ssp4_pcm_stereo_out, &pxa_ssp4_pcm_stereo_in,
},
struct pxa2xx_pcm_dma_data {
struct pxa2xx_pcm_dma_params params;
char name[20];
};
static struct pxa2xx_pcm_dma_params *
ssp_get_dma_params(struct ssp_device *ssp, int stereo, int out)
{
struct pxa2xx_pcm_dma_data *dma;
dma = kzalloc(sizeof(struct pxa2xx_pcm_dma_data), GFP_KERNEL);
if (dma == NULL)
return NULL;
snprintf(dma->name, 20, "SSP%d PCM %s %s", ssp->port_id,
stereo ? "Stereo" : "Mono", out ? "out" : "in");
dma->params.name = dma->name;
dma->params.drcmr = &DRCMR(out ? ssp->drcmr_tx : ssp->drcmr_rx);
dma->params.dcmd = (out ? (DCMD_INCSRCADDR | DCMD_FLOWTRG) :
(DCMD_INCTRGADDR | DCMD_FLOWSRC)) |
(stereo ? DCMD_WIDTH4 : DCMD_WIDTH2) | DCMD_BURST16;
dma->params.dev_addr = ssp->phys_base + SSDR;
return &dma->params;
}
static int pxa_ssp_startup(struct snd_pcm_substream *substream,
struct snd_soc_dai *dai)
{
@ -227,6 +102,11 @@ static int pxa_ssp_startup(struct snd_pcm_substream *substream,
clk_enable(priv->dev.ssp->clk);
ssp_disable(&priv->dev);
}
if (cpu_dai->dma_data) {
kfree(cpu_dai->dma_data);
cpu_dai->dma_data = NULL;
}
return ret;
}
@ -241,6 +121,11 @@ static void pxa_ssp_shutdown(struct snd_pcm_substream *substream,
ssp_disable(&priv->dev);
clk_disable(priv->dev.ssp->clk);
}
if (cpu_dai->dma_data) {
kfree(cpu_dai->dma_data);
cpu_dai->dma_data = NULL;
}
}
#ifdef CONFIG_PM
@ -653,25 +538,23 @@ static int pxa_ssp_hw_params(struct snd_pcm_substream *substream,
struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
struct ssp_priv *priv = cpu_dai->private_data;
struct ssp_device *ssp = priv->dev.ssp;
int dma = 0, chn = params_channels(params);
int chn = params_channels(params);
u32 sscr0;
u32 sspsp;
int width = snd_pcm_format_physical_width(params_format(params));
int ttsa = ssp_read_reg(ssp, SSTSA) & 0xf;
/* select correct DMA params */
if (substream->stream != SNDRV_PCM_STREAM_PLAYBACK)
dma = 1; /* capture DMA offset is 1,3 */
/* generate correct DMA params */
if (cpu_dai->dma_data)
kfree(cpu_dai->dma_data);
/* Network mode with one active slot (ttsa == 1) can be used
* to force 16-bit frame width on the wire (for S16_LE), even
* with two channels. Use 16-bit DMA transfers for this case.
*/
if (((chn == 2) && (ttsa != 1)) || (width == 32))
dma += 2; /* 32-bit DMA offset is 2, 16-bit is 0 */
cpu_dai->dma_data = ssp_dma_params[cpu_dai->id][dma];
dev_dbg(&ssp->pdev->dev, "pxa_ssp_hw_params: dma %d\n", dma);
cpu_dai->dma_data = ssp_get_dma_params(ssp,
((chn == 2) && (ttsa != 1)) || (width == 32),
substream->stream == SNDRV_PCM_STREAM_PLAYBACK);
/* we can only change the settings if the port is not in use */
if (ssp_read_reg(ssp, SSCR0) & SSCR0_SSE)