Merge branch 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull x86/hyperv changes from Ingo Molnar:
 "These changes enable Linux guests to boot as 'Modern VM' guest kernels
  on MS-Hyperv hosts"

* 'x86-hyperv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, hyperv: Move a variable to avoid an unused variable warning
  x86, hyperv: Fix build error due to missing <asm/apic.h> include
  x86, hyperv: Correctly guard the local APIC calibration code
  x86, hyperv: Get the local APIC timer frequency from the hypervisor
This commit is contained in:
Linus Torvalds 2013-11-12 11:07:49 +09:00
Родитель 69019d77c7 4c08edd305
Коммит 2dc1733fd4
2 изменённых файлов: 46 добавлений и 0 удалений

Просмотреть файл

@ -27,6 +27,19 @@
#define HV_X64_MSR_VP_RUNTIME_AVAILABLE (1 << 0)
/* Partition Reference Counter (HV_X64_MSR_TIME_REF_COUNT) available*/
#define HV_X64_MSR_TIME_REF_COUNT_AVAILABLE (1 << 1)
/*
* There is a single feature flag that signifies the presence of the MSR
* that can be used to retrieve both the local APIC Timer frequency as
* well as the TSC frequency.
*/
/* Local APIC timer frequency MSR (HV_X64_MSR_APIC_FREQUENCY) is available */
#define HV_X64_MSR_APIC_FREQUENCY_AVAILABLE (1 << 11)
/* TSC frequency MSR (HV_X64_MSR_TSC_FREQUENCY) is available */
#define HV_X64_MSR_TSC_FREQUENCY_AVAILABLE (1 << 11)
/*
* Basic SynIC MSRs (HV_X64_MSR_SCONTROL through HV_X64_MSR_EOM
* and HV_X64_MSR_SINT0 through HV_X64_MSR_SINT15) available
@ -136,6 +149,12 @@
/* MSR used to read the per-partition time reference counter */
#define HV_X64_MSR_TIME_REF_COUNT 0x40000020
/* MSR used to retrieve the TSC frequency */
#define HV_X64_MSR_TSC_FREQUENCY 0x40000022
/* MSR used to retrieve the local APIC timer frequency */
#define HV_X64_MSR_APIC_FREQUENCY 0x40000023
/* Define the virtual APIC registers */
#define HV_X64_MSR_EOI 0x40000070
#define HV_X64_MSR_ICR 0x40000071

Просмотреть файл

@ -15,6 +15,7 @@
#include <linux/clocksource.h>
#include <linux/module.h>
#include <linux/hardirq.h>
#include <linux/efi.h>
#include <linux/interrupt.h>
#include <asm/processor.h>
#include <asm/hypervisor.h>
@ -23,6 +24,8 @@
#include <asm/desc.h>
#include <asm/idle.h>
#include <asm/irq_regs.h>
#include <asm/i8259.h>
#include <asm/apic.h>
struct ms_hyperv_info ms_hyperv;
EXPORT_SYMBOL_GPL(ms_hyperv);
@ -76,6 +79,30 @@ static void __init ms_hyperv_init_platform(void)
printk(KERN_INFO "HyperV: features 0x%x, hints 0x%x\n",
ms_hyperv.features, ms_hyperv.hints);
#ifdef CONFIG_X86_LOCAL_APIC
if (ms_hyperv.features & HV_X64_MSR_APIC_FREQUENCY_AVAILABLE) {
/*
* Get the APIC frequency.
*/
u64 hv_lapic_frequency;
rdmsrl(HV_X64_MSR_APIC_FREQUENCY, hv_lapic_frequency);
hv_lapic_frequency = div_u64(hv_lapic_frequency, HZ);
lapic_timer_frequency = hv_lapic_frequency;
printk(KERN_INFO "HyperV: LAPIC Timer Frequency: %#x\n",
lapic_timer_frequency);
/*
* On Hyper-V, when we are booting off an EFI firmware stack,
* we do not have many legacy devices including PIC, PIT etc.
*/
if (efi_enabled(EFI_BOOT)) {
printk(KERN_INFO "HyperV: Using null_legacy_pic\n");
legacy_pic = &null_legacy_pic;
}
}
#endif
if (ms_hyperv.features & HV_X64_MSR_TIME_REF_COUNT_AVAILABLE)
clocksource_register_hz(&hyperv_cs, NSEC_PER_SEC/100);
}