clk: renesas: r8a779f0: Fix SCIF parent clocks

As serial communication requires a clean clock signal, the Serial
Communication Interfaces with FIFO (SCIF) are clocked by a clock that is
not affected by Spread Spectrum or Fractional Multiplication.

Hence change the parent clocks for the SCIF modules from the S0D12_PER
clock to the SASYNCPERD4 clock (which has the same clock rate), cfr.
R-Car S4-8 Hardware User's Manual rev. 0.81.

Fixes: 24aaff6a6c ("clk: renesas: cpg-mssr: Add support for R-Car S4-8")
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Link: https://lore.kernel.org/r/20221103143440.46449-3-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>

drivers/clk/renesas/r8a779f0-cpg-mssr.c

@@ -144,10 +144,10 @@ static const struct mssr_mod_clk r8a779f0_mod_clks[] __initconst = {
 	DEF_MOD("msiof3",	621,	R8A779F0_CLK_MSO),
 	DEF_MOD("pcie0",	624,	R8A779F0_CLK_S0D2),
 	DEF_MOD("pcie1",	625,	R8A779F0_CLK_S0D2),
-	DEF_MOD("scif0",	702,	R8A779F0_CLK_S0D12_PER),
-	DEF_MOD("scif1",	703,	R8A779F0_CLK_S0D12_PER),
-	DEF_MOD("scif3",	704,	R8A779F0_CLK_S0D12_PER),
-	DEF_MOD("scif4",	705,	R8A779F0_CLK_S0D12_PER),
+	DEF_MOD("scif0",	702,	R8A779F0_CLK_SASYNCPERD4),
+	DEF_MOD("scif1",	703,	R8A779F0_CLK_SASYNCPERD4),
+	DEF_MOD("scif3",	704,	R8A779F0_CLK_SASYNCPERD4),
+	DEF_MOD("scif4",	705,	R8A779F0_CLK_SASYNCPERD4),
 	DEF_MOD("sdhi0",        706,    R8A779F0_CLK_SD0),
 	DEF_MOD("sys-dmac0",	709,	R8A779F0_CLK_S0D3_PER),
 	DEF_MOD("sys-dmac1",	710,	R8A779F0_CLK_S0D3_PER),