Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer

SoCs with few board fixes and a fix for a long time hwmod bug:
 
 - Fix cpsw_emac0 link type for baltos-ir5221
 
 - Fix interrupt type for TWD
 
 - Fix edma memcpy channel allocation for am43x
 
 - Fix am43x-epos sycntimer32k by using the correct assigned clock
 
 - Fix interconnect barrier for dra7
 
 - Fix a long time hwmod bug for updating sysconfig register properly
 
 - Fix flakey booting on dm814x where USB reset needs a delay
 
 And there is one minor change that is not strictly a fix, but is
 good to have for proper hardware detection:
 
 - Detect dra7 silicon revision 2.0 properly
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1
 
 iQIcBAABAgAGBQJW/pp4AAoJEBvUPslcq6VzqQgP/RjKTIdwRnpjUryPwxwMwQ52
 gt9GjqMKvS3IvRyFewsjgTtoB/7l14qz3cVzurYeov+PekbqxnIJG1tVzltGVHQX
 WO13hzSV+Nuaf/4yFCCOcWSVtC4+26DvUCljfcUuxKiAsoXHrAIJJClHTtzqkXWK
 oJ5vipMKe166s7ULB9yKLoqU0wWBSsTqPK2IVjqdyF+eBcyy0BitJBembzWS6c8C
 FqhX3QOkU8PnzmUcJlVzqchA8ES7Cp2cgGnRcdFUV7A8gdBQrDDfAdJwb+CXhSYN
 3Csd++gcU/J3N8Rsbdv1mOVaHjQ+SVk22iWGT9z6FDBzg+S3thknCpDpP9qipV+i
 vV1LsCydKRVvXJO3SN5Pykhdwmod5zw/FSPe+0xyVsk3zxe8jzF3TKWkIeS43POA
 6e6DdhFfxI6u5BQydohOoMwDd/SzRQxA6IxZxpresDWeoE3Ffu4/ZyIhcUsZfcSK
 0kVEc+ayQQnLfN5P1jQ5gWvxWXvQ/p7DBfnDL+kfyShjFHJo5ZO51IVr1rNfdIQc
 fvtklMI82E4lf3qsRtHxrfPUuigWJcslfoQEJ7B3NVyXP7VXmB2iuKRUEI8QuvU4
 AxXwp5qmKVvnUoXNIsX9PGL9FLTokAFJ8YWPvjFOIIHP0JphZ/AEMhgVwbW7Ze6/
 VGjsmATRQqXSYqavc4No
 =5fhs
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Fixes for omaps against v4.6-rc1. Mostly minor fixes for the newer
SoCs with few board fixes and a fix for a long time hwmod bug:

- Fix cpsw_emac0 link type for baltos-ir5221
- Fix interrupt type for TWD
- Fix edma memcpy channel allocation for am43x
- Fix am43x-epos sycntimer32k by using the correct assigned clock
- Fix interconnect barrier for dra7
- Fix a long time hwmod bug for updating sysconfig register properly
- Fix flakey booting on dm814x where USB reset needs a delay

And there is one minor change that is not strictly a fix, but is
good to have for proper hardware detection:

- Detect dra7 silicon revision 2.0 properly

* tag 'omap-for-v4.6/fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  ARM: dts: am335x-baltos-ir5221: fix cpsw_emac0 link type
  ARM: OMAP: Correct interrupt type for ARM TWD
  ARM: DRA722: Add ID detect for Silicon Rev 2.0
  ARM: dts: am43xx: fix edma memcpy channel allocation
  ARM: dts: AM43x-epos: Fix clk parent for synctimer
  ARM: OMAP2: Fix up interconnect barrier initialization for DRA7
  ARM: OMAP2+: hwmod: Fix updating of sysconfig register
  ARM: OMAP2+: Use srst_udelay for USB on dm814x

Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm/boot/dts/am335x-baltos-ir5221.dts

@@ -470,9 +470,12 @@
 };
 
 &cpsw_emac0 {
-	phy_id = <&davinci_mdio>, <0>;
 	phy-mode = "rmii";
 	dual_emac_res_vlan = <1>;
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
 };
 
 &cpsw_emac1 {

arch/arm/boot/dts/am4372.dtsi

@@ -207,7 +207,7 @@
 			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
 				   <&edma_tptc2 0>;
 
-			ti,edma-memcpy-channels = <32 33>;
+			ti,edma-memcpy-channels = <58 59>;
 		};
 
 		edma_tptc0: tptc@49800000 {

arch/arm/boot/dts/am43x-epos-evm.dts

@@ -794,3 +794,8 @@
 	tx-num-evt = <32>;
 	rx-num-evt = <32>;
 };
+
+&synctimer_32kclk {
+	assigned-clocks = <&mux_synctimer32k_ck>;
+	assigned-clock-parents = <&clkdiv32k_ick>;
+};

arch/arm/boot/dts/omap4.dtsi

@@ -70,7 +70,7 @@
 		compatible = "arm,cortex-a9-twd-timer";
 		clocks = <&mpu_periphclk>;
 		reg = <0x48240600 0x20>;
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_LEVEL_HIGH)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_RAW(3) | IRQ_TYPE_EDGE_RISING)>;
 		interrupt-parent = <&gic>;
 	};
 

arch/arm/mach-omap2/id.c

@@ -669,9 +669,9 @@ void __init dra7xxx_check_revision(void)
 		case 0:
 			omap_revision = DRA722_REV_ES1_0;
 			break;
+		case 1:
 		default:
-			/* If we have no new revisions */
-			omap_revision = DRA722_REV_ES1_0;
+			omap_revision = DRA722_REV_ES2_0;
 			break;
 		}
 		break;

arch/arm/mach-omap2/io.c

@@ -368,6 +368,7 @@ void __init omap5_map_io(void)
 void __init dra7xx_map_io(void)
 {
 	iotable_init(dra7xx_io_desc, ARRAY_SIZE(dra7xx_io_desc));
+	omap_barriers_init();
 }
 #endif
 /*

arch/arm/mach-omap2/omap_hwmod.c

@@ -1416,9 +1416,7 @@ static void _enable_sysc(struct omap_hwmod *oh)
 	    (sf & SYSC_HAS_CLOCKACTIVITY))
 		_set_clockactivity(oh, oh->class->sysc->clockact, &v);
 
-	/* If the cached value is the same as the new value, skip the write */
-	if (oh->_sysc_cache != v)
-		_write_sysconfig(v, oh);
+	_write_sysconfig(v, oh);
 
 	/*
 	 * Set the autoidle bit only after setting the smartidle bit
@@ -1481,7 +1479,9 @@ static void _idle_sysc(struct omap_hwmod *oh)
 		_set_master_standbymode(oh, idlemode, &v);
 	}
 
-	_write_sysconfig(v, oh);
+	/* If the cached value is the same as the new value, skip the write */
+	if (oh->_sysc_cache != v)
+		_write_sysconfig(v, oh);
 }
 
 /**

arch/arm/mach-omap2/omap_hwmod_81xx_data.c

@@ -582,9 +582,11 @@ static struct omap_hwmod_ocp_if dm81xx_alwon_l3_slow__gpmc = {
 	.user		= OCP_USER_MPU,
 };
 
+/* USB needs udelay 1 after reset at least on hp t410, use 2 for margin */
 static struct omap_hwmod_class_sysconfig dm81xx_usbhsotg_sysc = {
 	.rev_offs	= 0x0,
 	.sysc_offs	= 0x10,
+	.srst_udelay	= 2,
 	.sysc_flags	= SYSC_HAS_SIDLEMODE | SYSC_HAS_MIDLEMODE |
 				SYSC_HAS_SOFTRESET,
 	.idlemodes	= SIDLE_SMART | MSTANDBY_FORCE | MSTANDBY_SMART,

arch/arm/mach-omap2/soc.h

@@ -489,6 +489,7 @@ IS_OMAP_TYPE(3430, 0x3430)
 #define DRA752_REV_ES2_0	(DRA7XX_CLASS | (0x52 << 16) | (0x20 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
 #define DRA722_REV_ES1_0	(DRA7XX_CLASS | (0x22 << 16) | (0x10 << 8))
+#define DRA722_REV_ES2_0	(DRA7XX_CLASS | (0x22 << 16) | (0x20 << 8))
 
 void omap2xxx_check_revision(void);
 void omap3xxx_check_revision(void);