Merge branch 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux

Pull i2c-embedded fixes from Wolfram Sang:
 "Some bugfixes for the "embedded" part of the I2C subsystem.  The fixes
  affect mostly drivers which have been largely reworked lately and
  where regressions appeared."

* 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux:
  i2c: tegra: protect suspend/resume callbacks with CONFIG_PM_SLEEP
  i2c: diolan-u2c: Fix master_xfer return code
  I2C: OMAP: xfer: fix runtime PM get/put balance on error
  i2c: nomadik: Add default configuration into the Nomadik I2C driver
This commit is contained in:
Linus Torvalds 2012-08-22 10:41:36 -07:00
Родитель fec3c03fb0 371e67c9e1
Коммит 2e2d8c93ae
4 изменённых файлов: 21 добавлений и 12 удалений

Просмотреть файл

@ -405,6 +405,7 @@ static int diolan_usb_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs,
}
}
}
ret = num;
abort:
sret = diolan_i2c_stop(dev);
if (sret < 0 && ret >= 0)

Просмотреть файл

@ -350,10 +350,6 @@ static void setup_i2c_controller(struct nmk_i2c_dev *dev)
i2c_clk = clk_get_rate(dev->clk);
/* fallback to std. mode if machine has not provided it */
if (dev->cfg.clk_freq == 0)
dev->cfg.clk_freq = 100000;
/*
* The spec says, in case of std. mode the divider is
* 2 whereas it is 3 for fast and fastplus mode of
@ -911,20 +907,32 @@ static const struct i2c_algorithm nmk_i2c_algo = {
.functionality = nmk_i2c_functionality
};
static struct nmk_i2c_controller u8500_i2c = {
/*
* Slave data setup time; 250ns, 100ns, and 10ns, which
* is 14, 6 and 2 respectively for a 48Mhz i2c clock.
*/
.slsu = 0xe,
.tft = 1, /* Tx FIFO threshold */
.rft = 8, /* Rx FIFO threshold */
.clk_freq = 400000, /* fast mode operation */
.timeout = 200, /* Slave response timeout(ms) */
.sm = I2C_FREQ_MODE_FAST,
};
static atomic_t adapter_id = ATOMIC_INIT(0);
static int nmk_i2c_probe(struct amba_device *adev, const struct amba_id *id)
{
int ret = 0;
struct nmk_i2c_controller *pdata =
adev->dev.platform_data;
struct nmk_i2c_controller *pdata = adev->dev.platform_data;
struct nmk_i2c_dev *dev;
struct i2c_adapter *adap;
if (!pdata) {
dev_warn(&adev->dev, "no platform data\n");
return -ENODEV;
}
if (!pdata)
/* No i2c configuration found, using the default. */
pdata = &u8500_i2c;
dev = kzalloc(sizeof(struct nmk_i2c_dev), GFP_KERNEL);
if (!dev) {
dev_err(&adev->dev, "cannot allocate memory\n");

Просмотреть файл

@ -584,7 +584,7 @@ omap_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
r = pm_runtime_get_sync(dev->dev);
if (IS_ERR_VALUE(r))
return r;
goto out;
r = omap_i2c_wait_for_bb(dev);
if (r < 0)

Просмотреть файл

@ -712,7 +712,7 @@ static int __devexit tegra_i2c_remove(struct platform_device *pdev)
return 0;
}
#ifdef CONFIG_PM
#ifdef CONFIG_PM_SLEEP
static int tegra_i2c_suspend(struct device *dev)
{
struct tegra_i2c_dev *i2c_dev = dev_get_drvdata(dev);