ARM: OMAP1: Move most of plat/io.h into local iomap.h

There's no need to have these in plat/io.h.

While at it, clean up the includes to group them
like they typically are grouped.

Signed-off-by: Tony Lindgren <tony@atomide.com>

arch/arm/mach-omap1/ams-delta-fiq-handler.S

@@ -15,11 +15,12 @@
 
 #include <linux/linkage.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 
 #include <mach/ams-delta-fiq.h>
 
+#include "iomap.h"
+
 /*
  * GPIO related definitions, copied from arch/arm/plat-omap/gpio.c.
  * Unfortunately, those were not placed in a separate header file.

arch/arm/mach-omap1/ams-delta-fiq.c

@@ -22,6 +22,7 @@
 #include <plat/board-ams-delta.h>
 
 #include <asm/fiq.h>
+
 #include <mach/ams-delta-fiq.h>
 
 static struct fiq_handler fh = {

arch/arm/mach-omap1/board-ams-delta.c

@@ -20,25 +20,27 @@
 #include <linux/platform_device.h>
 #include <linux/serial_8250.h>
 #include <linux/export.h>
+#include <linux/io.h>
 
 #include <media/soc_camera.h>
 
 #include <asm/serial.h>
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <plat/io.h>
 #include <plat/board-ams-delta.h>
 #include <plat/keypad.h>
 #include <plat/mux.h>
 #include <plat/usb.h>
 #include <plat/board.h>
-#include "common.h"
+
+#include <mach/hardware.h>
+#include <mach/ams-delta-fiq.h>
 #include <mach/camera.h>
 
-#include <mach/ams-delta-fiq.h>
+#include "iomap.h"
+#include "common.h"
 
 static u8 ams_delta_latch1_reg;
 static u16 ams_delta_latch2_reg;

arch/arm/mach-omap1/board-fsample.c

@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +31,13 @@
 #include <plat/flash.h>
 #include <plat/fpga.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* fsample is pretty close to p2-sample */
 
 #define fsample_cpld_read(reg) __raw_readb(reg)

arch/arm/mach-omap1/board-h2.c

@@ -31,8 +31,6 @@
 #include <linux/i2c/tps65010.h>
 #include <linux/smc91x.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -43,9 +41,11 @@
 #include <plat/irda.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "board-h2.h"
 
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */

arch/arm/mach-omap1/board-h3.c

@@ -33,21 +33,21 @@
 
 #include <asm/setup.h>
 #include <asm/page.h>
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#include <mach/irqs.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
 #include <plat/dma.h>
-#include "common.h"
 #include <plat/flash.h>
 
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+
+#include "common.h"
 #include "board-h3.h"
 
 /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */

arch/arm/mach-omap1/board-htcherald.c

@@ -27,7 +27,7 @@
 #include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/input.h>
-#include <linux/io.h>
+#include <linux/delay.h>
 #include <linux/gpio.h>
 #include <linux/gpio_keys.h>
 #include <linux/i2c.h>
@@ -41,7 +41,6 @@
 #include <asm/mach/arch.h>
 
 #include <plat/omap7xx.h>
-#include "common.h"
 #include <plat/board.h>
 #include <plat/keypad.h>
 #include <plat/usb.h>
@@ -49,7 +48,7 @@
 
 #include <mach/irqs.h>
 
-#include <linux/delay.h>
+#include "common.h"
 
 /* LCD register definition */
 #define       OMAP_LCDC_CONTROL               (0xfffec000 + 0x00)

arch/arm/mach-omap1/board-innovator.c

@@ -26,7 +26,6 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -37,9 +36,13 @@
 #include <plat/tc.h>
 #include <plat/usb.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/mmc.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 /* At OMAP1610 Innovator the Ethernet is directly connected to CS1 */
 #define INNOVATOR1610_ETHR_START	0x04000300
 

arch/arm/mach-omap1/board-nokia770.c

@@ -21,7 +21,6 @@
 #include <linux/workqueue.h>
 #include <linux/delay.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -30,12 +29,15 @@
 #include <plat/usb.h>
 #include <plat/board.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/hwa742.h>
 #include <plat/lcd_mipid.h>
 #include <plat/mmc.h>
 #include <plat/clock.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 #define ADS7846_PENDOWN_GPIO	15
 
 static const unsigned int nokia770_keymap[] = {

arch/arm/mach-omap1/board-osk.c

@@ -34,15 +34,11 @@
 #include <linux/i2c.h>
 #include <linux/leds.h>
 #include <linux/smc91x.h>
-
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
-
 #include <linux/i2c/tps65010.h>
 
-#include <mach/hardware.h>
-
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -51,6 +47,9 @@
 #include <plat/usb.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 /* At OMAP5912 OSK the Ethernet is directly connected to CS1 */

arch/arm/mach-omap1/board-palmte.c

@@ -28,7 +28,6 @@
 #include <linux/interrupt.h>
 #include <linux/apm-emulation.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,6 +40,9 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
+
+#include <mach/hardware.h>
+
 #include "common.h"
 
 #define PALMTE_USBDETECT_GPIO	0

arch/arm/mach-omap1/board-palmtt.c

@@ -24,8 +24,9 @@
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
 #include <linux/leds.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -39,10 +40,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMTT_USBDETECT_GPIO	0
 #define PALMTT_CABLE_GPIO	1

arch/arm/mach-omap1/board-palmz71.c

@@ -27,8 +27,9 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 #include <linux/mtd/physmap.h>
+#include <linux/spi/spi.h>
+#include <linux/spi/ads7846.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -41,10 +42,10 @@
 #include <plat/board.h>
 #include <plat/irda.h>
 #include <plat/keypad.h>
-#include "common.h"
 
-#include <linux/spi/spi.h>
-#include <linux/spi/ads7846.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 
 #define PALMZ71_USBDETECT_GPIO	0
 #define PALMZ71_PENIRQ_GPIO	6

arch/arm/mach-omap1/board-perseus2.c

@@ -22,7 +22,6 @@
 #include <linux/input.h>
 #include <linux/smc91x.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -32,9 +31,13 @@
 #include <plat/fpga.h>
 #include <plat/flash.h>
 #include <plat/keypad.h>
-#include "common.h"
 #include <plat/board.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+#include "common.h"
+
 static const unsigned int p2_keymap[] = {
 	KEY(0, 0, KEY_UP),
 	KEY(1, 0, KEY_RIGHT),

arch/arm/mach-omap1/board-sx1.c

@@ -28,7 +28,6 @@
 #include <linux/errno.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
@@ -40,10 +39,13 @@
 #include <plat/usb.h>
 #include <plat/tc.h>
 #include <plat/board.h>
-#include "common.h"
 #include <plat/keypad.h>
 #include <plat/board-sx1.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /* Write to I2C device */
 int sx1_i2c_write_byte(u8 devaddr, u8 regoffset, u8 value)
 {

arch/arm/mach-omap1/board-voiceblue.c

@@ -27,18 +27,20 @@
 #include <linux/smc91x.h>
 #include <linux/export.h>
 
-#include <mach/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
 #include <plat/board-voiceblue.h>
-#include "common.h"
 #include <plat/flash.h>
 #include <plat/mux.h>
 #include <plat/tc.h>
 #include <plat/usb.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 static struct plat_serial8250_port voiceblue_ports[] = {
 	{
 		.mapbase	= (unsigned long)(OMAP_CS1_PHYS + 0x40000),

arch/arm/mach-omap1/clock.c

@@ -16,7 +16,6 @@
 #include <linux/errno.h>
 #include <linux/err.h>
 #include <linux/clk.h>
-#include <linux/io.h>
 #include <linux/clkdev.h>
 
 #include <asm/mach-types.h>
@@ -27,6 +26,7 @@
 #include <plat/sram.h>
 #include <plat/clkdev_omap.h>
 
+#include "iomap.h"
 #include "clock.h"
 #include "opp.h"
 

arch/arm/mach-omap1/clock_data.c

@@ -18,7 +18,6 @@
 #include <linux/clk.h>
 #include <linux/cpufreq.h>
 #include <linux/delay.h>
-#include <linux/io.h>
 
 #include <asm/mach-types.h>  /* for machine_is_* */
 
@@ -28,6 +27,7 @@
 #include <plat/sram.h>	/* for omap_sram_reprogram_clock() */
 #include <plat/usb.h>   /* for OTG_BASE */
 
+#include "iomap.h"
 #include "clock.h"
 
 /* Some ARM_IDLECT1 bit shifts - used in struct arm_idlect1_clk */

arch/arm/mach-omap1/devices.c

@@ -15,14 +15,10 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/platform_device.h>
-#include <linux/io.h>
 #include <linux/spi/spi.h>
 
-#include <mach/camera.h>
-#include <mach/hardware.h>
 #include <asm/mach/map.h>
 
-#include "common.h"
 #include <plat/tc.h>
 #include <plat/board.h>
 #include <plat/mux.h>
@@ -30,6 +26,10 @@
 #include <plat/omap7xx.h>
 #include <plat/mcbsp.h>
 
+#include <mach/camera.h>
+#include <mach/hardware.h>
+
+#include "common.h"
 #include "clock.h"
 
 /*-------------------------------------------------------------------------*/

arch/arm/mach-omap1/dma.c

@@ -19,11 +19,11 @@
  */
 
 #include <linux/err.h>
-#include <linux/io.h>
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/init.h>
 #include <linux/device.h>
+#include <linux/io.h>
 
 #include <plat/dma.h>
 #include <plat/tc.h>

arch/arm/mach-omap1/flash.c

@@ -6,10 +6,10 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/io.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 
-#include <plat/io.h>
 #include <plat/tc.h>
 #include <plat/flash.h>
 

arch/arm/mach-omap1/fpga.c

@@ -24,12 +24,15 @@
 #include <linux/errno.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 
 #include <plat/fpga.h>
 
+#include <mach/hardware.h>
+
+#include "iomap.h"
+
 static void fpga_mask_irq(struct irq_data *d)
 {
 	unsigned int irq = d->irq - OMAP_FPGA_IRQ_BASE;

arch/arm/mach-omap1/id.c

@@ -15,6 +15,7 @@
 #include <linux/kernel.h>
 #include <linux/init.h>
 #include <linux/io.h>
+
 #include <plat/cpu.h>
 
 #define OMAP_DIE_ID_0		0xfffe1800

arch/arm/mach-omap1/include/mach/entry-macro.S

@@ -9,10 +9,12 @@
  * License version 2. This program is licensed "as is" without any
  * warranty of any kind, whether express or implied.
  */
+
 #include <mach/hardware.h>
 #include <mach/io.h>
 #include <mach/irqs.h>
-#include <asm/hardware/gic.h>
+
+#include "../../iomap.h"
 
  		.macro	disable_fiq
 		.endm

arch/arm/mach-omap1/io.c

@@ -15,9 +15,12 @@
 
 #include <asm/tlb.h>
 #include <asm/mach/map.h>
+
 #include <plat/mux.h>
 #include <plat/tc.h>
 
+#include "iomap.h"
+#include "common.h"
 #include "clock.h"
 
 extern void omap_check_revision(void);

arch/arm/mach-omap1/iomap.h

@@ -0,0 +1,42 @@
+/*
+ * IO mappings for OMAP1
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the  GNU General Public License along
+ * with this program; if not, write  to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifdef __ASSEMBLER__
+#define IOMEM(x)		(x)
+#else
+#define IOMEM(x)		((void __force __iomem *)(x))
+#endif
+
+#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
+#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
+
+/*
+ * ----------------------------------------------------------------------------
+ * Omap1 specific IO mapping
+ * ----------------------------------------------------------------------------
+ */
+
+#define OMAP1_IO_PHYS		0xFFFB0000
+#define OMAP1_IO_SIZE		0x40000
+#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)

arch/arm/mach-omap1/irq.c

@@ -42,11 +42,13 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
+
 #include <plat/cpu.h>
 
+#include <mach/hardware.h>
+
 #define IRQ_BANK(irq) ((irq) >> 5)
 #define IRQ_BIT(irq)  ((irq) & 0x1f)
 

arch/arm/mach-omap1/lcd_dma.c

@@ -27,9 +27,10 @@
 #include <linux/interrupt.h>
 #include <linux/io.h>
 
+#include <plat/dma.h>
+
 #include <mach/hardware.h>
 #include <mach/lcdc.h>
-#include <plat/dma.h>
 
 int omap_lcd_dma_running(void)
 {

arch/arm/mach-omap1/mcbsp.c

@@ -19,12 +19,15 @@
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
-#include <mach/irqs.h>
 #include <plat/dma.h>
 #include <plat/mux.h>
 #include <plat/cpu.h>
 #include <plat/mcbsp.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
+
 #define DPS_RSTCT2_PER_EN	(1 << 0)
 #define DSP_RSTCT2_WD_PER_EN	(1 << 1)
 

arch/arm/mach-omap1/pm.c

@@ -42,14 +42,13 @@
 #include <linux/sysfs.h>
 #include <linux/module.h>
 #include <linux/io.h>
+#include <linux/atomic.h>
 
 #include <asm/irq.h>
-#include <linux/atomic.h>
 #include <asm/mach/time.h>
 #include <asm/mach/irq.h>
 
 #include <plat/cpu.h>
-#include <mach/irqs.h>
 #include <plat/clock.h>
 #include <plat/sram.h>
 #include <plat/tc.h>
@@ -57,6 +56,9 @@
 #include <plat/dma.h>
 #include <plat/dmtimer.h>
 
+#include <mach/irqs.h>
+
+#include "iomap.h"
 #include "pm.h"
 
 static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE];

arch/arm/mach-omap1/reset.c

@@ -4,9 +4,10 @@
 #include <linux/kernel.h>
 #include <linux/io.h>
 
-#include <mach/hardware.h>
 #include <plat/prcm.h>
 
+#include <mach/hardware.h>
+
 void omap1_restart(char mode, const char *cmd)
 {
 	/*

arch/arm/mach-omap1/sleep.S

@@ -33,8 +33,12 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
+
+#include "iomap.h"
 #include "pm.h"
 
 		.text

arch/arm/mach-omap1/sram.S

@@ -9,10 +9,14 @@
  */
 
 #include <linux/linkage.h>
+
 #include <asm/assembler.h>
+
 #include <mach/io.h>
 #include <mach/hardware.h>
 
+#include "iomap.h"
+
 	.text
 
 /*

arch/arm/mach-omap1/time.c

@@ -45,14 +45,15 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/sched_clock.h>
 
+#include <mach/hardware.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
 
+#include "iomap.h"
 #include "common.h"
 
 #ifdef CONFIG_OMAP_MPU_TIMER

arch/arm/mach-omap1/timer32k.c

@@ -47,14 +47,17 @@
 #include <linux/io.h>
 
 #include <asm/system.h>
-#include <mach/hardware.h>
 #include <asm/leds.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
 #include <asm/mach/time.h>
-#include "common.h"
+
 #include <plat/dmtimer.h>
 
+#include <mach/hardware.h>
+
+#include "common.h"
+
 /*
  * ---------------------------------------------------------------------------
  * 32KHz OS timer

arch/arm/plat-omap/include/plat/io.h

@@ -60,9 +60,6 @@
 #define IOMEM(x)		((void __force __iomem *)(x))
 #endif
 
-#define OMAP1_IO_OFFSET		0x01000000	/* Virtual IO = 0xfefb0000 */
-#define OMAP1_IO_ADDRESS(pa)	IOMEM((pa) - OMAP1_IO_OFFSET)
-
 #define OMAP2_L3_IO_OFFSET	0x90000000
 #define OMAP2_L3_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_L3_IO_OFFSET) /* L3 */
 
@@ -85,16 +82,6 @@
 #define OMAP2_EMU_IO_OFFSET		0xaa800000	/* Emulation */
 #define OMAP2_EMU_IO_ADDRESS(pa)	IOMEM((pa) + OMAP2_EMU_IO_OFFSET)
 
-/*
- * ----------------------------------------------------------------------------
- * Omap1 specific IO mapping
- * ----------------------------------------------------------------------------
- */
-
-#define OMAP1_IO_PHYS		0xFFFB0000
-#define OMAP1_IO_SIZE		0x40000
-#define OMAP1_IO_VIRT		(OMAP1_IO_PHYS - OMAP1_IO_OFFSET)
-
 /*
  * ----------------------------------------------------------------------------
  * Omap2 specific IO mapping