microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6 

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (48 commits)
  net: Fix wrong interpretation of some copy_to_user() results.
  xfrm: alg_key_len & alg_icv_len should be unsigned
  [netdrvr] tehuti: move ioctl perm check closer to function start
  ipv6: Fix typo in net/ipv6/Kconfig
  via-velocity: fix vlan receipt
  tg3: sparse cleanup
  forcedeth: realtek phy crossover detection
  ibm_newemac: Increase MDIO timeouts
  gianfar: Fix skb allocation strategy
  netxen: reduce stack usage of netxen_nic_flash_print
  smc911x: test after postfix decrement fails in smc911x_{reset,drop_pkt}
  net drivers: fix platform driver hotplug/coldplug
  forcedeth: new backoff implementation
  ehea: make things static
  phylib: Add support for board-level PHY fixups
  [netdrvr] atlx: code movement: move atl1 parameter parsing
  atlx: remove flash vendor parameter
  korina: misc cleanup
  korina: fix misplaced return statement
  WAN: Fix confusing insmod error code for C101 too.
  ...
This commit is contained in:
Linus Torvalds 2008-04-25 12:28:28 -07:00
Родитель 2cfed60cc2 653252c230
Коммит 2e561c7b7e
67 изменённых файлов: 1672 добавлений и 728 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

38
Documentation/networking/phy.txt
Просмотреть файл

@ -1,7 +1,7 @@
-------
PHY Abstraction Layer
(Updated 2006-11-30)
(Updated 2008-04-08)
Purpose
@ -291,3 +291,39 @@ Writing a PHY driver
Feel free to look at the Marvell, Cicada, and Davicom drivers in
drivers/net/phy/ for examples (the lxt and qsemi drivers have
not been tested as of this writing)
Board Fixups
Sometimes the specific interaction between the platform and the PHY requires
special handling. For instance, to change where the PHY's clock input is,
or to add a delay to account for latency issues in the data path. In order
to support such contingencies, the PHY Layer allows platform code to register
fixups to be run when the PHY is brought up (or subsequently reset).
When the PHY Layer brings up a PHY it checks to see if there are any fixups
registered for it, matching based on UID (contained in the PHY device's phy_id
field) and the bus identifier (contained in phydev->dev.bus_id). Both must
match, however two constants, PHY_ANY_ID and PHY_ANY_UID, are provided as
wildcards for the bus ID and UID, respectively.
When a match is found, the PHY layer will invoke the run function associated
with the fixup. This function is passed a pointer to the phy_device of
interest. It should therefore only operate on that PHY.
The platform code can either register the fixup using phy_register_fixup():
int phy_register_fixup(const char *phy_id,
u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
Or using one of the two stubs, phy_register_fixup_for_uid() and
phy_register_fixup_for_id():
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
int phy_register_fixup_for_id(const char *phy_id,
int (*run)(struct phy_device *));
The stubs set one of the two matching criteria, and set the other one to
match anything.

1
drivers/net/arm/at91_ether.c
Просмотреть файл

@ -1248,3 +1248,4 @@ module_exit(at91ether_exit)
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver");
MODULE_AUTHOR("Andrew Victor");
MODULE_ALIAS("platform:" DRV_NAME);

2
drivers/net/arm/ep93xx_eth.c
Просмотреть файл

@ -897,6 +897,7 @@ static struct platform_driver ep93xx_eth_driver = {
.remove = ep93xx_eth_remove,
.driver = {
.name = "ep93xx-eth",
.owner = THIS_MODULE,
},
};
@ -914,3 +915,4 @@ static void __exit ep93xx_eth_cleanup_module(void)
module_init(ep93xx_eth_init_module);
module_exit(ep93xx_eth_cleanup_module);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:ep93xx-eth");

138
drivers/net/atlx/atl1.c
Просмотреть файл

@ -90,6 +90,144 @@
/* Temporary hack for merging atl1 and atl2 */
#include "atlx.c"
/*
* This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
#define ATL1_MAX_NIC 4
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED 1
#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
/*
* Interrupt Moderate Timer in units of 2 us
*
* Valid Range: 10-65535
*
* Default Value: 100 (200us)
*/
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static int num_int_mod_timer;
module_param_array_named(int_mod_timer, int_mod_timer, int,
&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
#define DEFAULT_INT_MOD_CNT 100 /* 200us */
#define MAX_INT_MOD_CNT 65000
#define MIN_INT_MOD_CNT 50
struct atl1_option {
enum { enable_option, range_option, list_option } type;
char *name;
char *err;
int def;
union {
struct { /* range_option info */
int min;
int max;
} r;
struct { /* list_option info */
int nr;
struct atl1_opt_list {
int i;
char *str;
} *p;
} l;
} arg;
};
static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
struct pci_dev *pdev)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
switch (opt->type) {
case enable_option:
switch (*value) {
case OPTION_ENABLED:
dev_info(&pdev->dev, "%s enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
dev_info(&pdev->dev, "%s disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
dev_info(&pdev->dev, "%s set to %i\n", opt->name,
*value);
return 0;
}
break;
case list_option:{
int i;
struct atl1_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
dev_info(&pdev->dev, "%s\n",
ent->str);
return 0;
}
}
}
break;
default:
break;
}
dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
/*
* atl1_check_options - Range Checking for Command Line Parameters
* @adapter: board private structure
*
* This routine checks all command line parameters for valid user
* input. If an invalid value is given, or if no user specified
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
*/
void __devinit atl1_check_options(struct atl1_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
int bd = adapter->bd_number;
if (bd >= ATL1_MAX_NIC) {
dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
dev_notice(&pdev->dev, "using defaults for all values\n");
}
{ /* Interrupt Moderate Timer */
struct atl1_option opt = {
.type = range_option,
.name = "Interrupt Moderator Timer",
.err = "using default of "
__MODULE_STRING(DEFAULT_INT_MOD_CNT),
.def = DEFAULT_INT_MOD_CNT,
.arg = {.r = {.min = MIN_INT_MOD_CNT,
.max = MAX_INT_MOD_CNT} }
};
int val;
if (num_int_mod_timer > bd) {
val = int_mod_timer[bd];
atl1_validate_option(&val, &opt, pdev);
adapter->imt = (u16) val;
} else
adapter->imt = (u16) (opt.def);
}
}
/*
* atl1_pci_tbl - PCI Device ID Table
*/

177
drivers/net/atlx/atlx.c
Просмотреть файл

@ -253,181 +253,4 @@ static void atlx_restore_vlan(struct atlx_adapter *adapter)
atlx_vlan_rx_register(adapter->netdev, adapter->vlgrp);
}
/*
* This is the only thing that needs to be changed to adjust the
* maximum number of ports that the driver can manage.
*/
#define ATL1_MAX_NIC 4
#define OPTION_UNSET -1
#define OPTION_DISABLED 0
#define OPTION_ENABLED 1
#define ATL1_PARAM_INIT { [0 ... ATL1_MAX_NIC] = OPTION_UNSET }
/*
* Interrupt Moderate Timer in units of 2 us
*
* Valid Range: 10-65535
*
* Default Value: 100 (200us)
*/
static int __devinitdata int_mod_timer[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static int num_int_mod_timer;
module_param_array_named(int_mod_timer, int_mod_timer, int,
&num_int_mod_timer, 0);
MODULE_PARM_DESC(int_mod_timer, "Interrupt moderator timer");
/*
* flash_vendor
*
* Valid Range: 0-2
*
* 0 - Atmel
* 1 - SST
* 2 - ST
*
* Default Value: 0
*/
static int __devinitdata flash_vendor[ATL1_MAX_NIC+1] = ATL1_PARAM_INIT;
static int num_flash_vendor;
module_param_array_named(flash_vendor, flash_vendor, int, &num_flash_vendor, 0);
MODULE_PARM_DESC(flash_vendor, "SPI flash vendor");
#define DEFAULT_INT_MOD_CNT 100 /* 200us */
#define MAX_INT_MOD_CNT 65000
#define MIN_INT_MOD_CNT 50
#define FLASH_VENDOR_DEFAULT 0
#define FLASH_VENDOR_MIN 0
#define FLASH_VENDOR_MAX 2
struct atl1_option {
enum { enable_option, range_option, list_option } type;
char *name;
char *err;
int def;
union {
struct { /* range_option info */
int min;
int max;
} r;
struct { /* list_option info */
int nr;
struct atl1_opt_list {
int i;
char *str;
} *p;
} l;
} arg;
};
static int __devinit atl1_validate_option(int *value, struct atl1_option *opt,
struct pci_dev *pdev)
{
if (*value == OPTION_UNSET) {
*value = opt->def;
return 0;
}
switch (opt->type) {
case enable_option:
switch (*value) {
case OPTION_ENABLED:
dev_info(&pdev->dev, "%s enabled\n", opt->name);
return 0;
case OPTION_DISABLED:
dev_info(&pdev->dev, "%s disabled\n", opt->name);
return 0;
}
break;
case range_option:
if (*value >= opt->arg.r.min && *value <= opt->arg.r.max) {
dev_info(&pdev->dev, "%s set to %i\n", opt->name,
*value);
return 0;
}
break;
case list_option:{
int i;
struct atl1_opt_list *ent;
for (i = 0; i < opt->arg.l.nr; i++) {
ent = &opt->arg.l.p[i];
if (*value == ent->i) {
if (ent->str[0] != '\0')
dev_info(&pdev->dev, "%s\n",
ent->str);
return 0;
}
}
}
break;
default:
break;
}
dev_info(&pdev->dev, "invalid %s specified (%i) %s\n",
opt->name, *value, opt->err);
*value = opt->def;
return -1;
}
/*
* atl1_check_options - Range Checking for Command Line Parameters
* @adapter: board private structure
*
* This routine checks all command line parameters for valid user
* input. If an invalid value is given, or if no user specified
* value exists, a default value is used. The final value is stored
* in a variable in the adapter structure.
*/
void __devinit atl1_check_options(struct atl1_adapter *adapter)
{
struct pci_dev *pdev = adapter->pdev;
int bd = adapter->bd_number;
if (bd >= ATL1_MAX_NIC) {
dev_notice(&pdev->dev, "no configuration for board#%i\n", bd);
dev_notice(&pdev->dev, "using defaults for all values\n");
}
{ /* Interrupt Moderate Timer */
struct atl1_option opt = {
.type = range_option,
.name = "Interrupt Moderator Timer",
.err = "using default of "
__MODULE_STRING(DEFAULT_INT_MOD_CNT),
.def = DEFAULT_INT_MOD_CNT,
.arg = {.r = {.min = MIN_INT_MOD_CNT,
.max = MAX_INT_MOD_CNT} }
};
int val;
if (num_int_mod_timer > bd) {
val = int_mod_timer[bd];
atl1_validate_option(&val, &opt, pdev);
adapter->imt = (u16) val;
} else
adapter->imt = (u16) (opt.def);
}
{ /* Flash Vendor */
struct atl1_option opt = {
.type = range_option,
.name = "SPI Flash Vendor",
.err = "using default of "
__MODULE_STRING(FLASH_VENDOR_DEFAULT),
.def = DEFAULT_INT_MOD_CNT,
.arg = {.r = {.min = FLASH_VENDOR_MIN,
.max = FLASH_VENDOR_MAX} }
};
int val;
if (num_flash_vendor > bd) {
val = flash_vendor[bd];
atl1_validate_option(&val, &opt, pdev);
adapter->hw.flash_vendor = (u8) val;
} else
adapter->hw.flash_vendor = (u8) (opt.def);
}
}
#endif /* ATLX_C */

1
drivers/net/ax88796.c
Просмотреть файл

@ -1005,3 +1005,4 @@ module_exit(axdrv_exit);
MODULE_DESCRIPTION("AX88796 10/100 Ethernet platform driver");
MODULE_AUTHOR("Ben Dooks, <ben@simtec.co.uk>");
MODULE_LICENSE("GPL v2");
MODULE_ALIAS("platform:ax88796");

7
drivers/net/bfin_mac.c
Просмотреть файл

@ -47,6 +47,7 @@
MODULE_AUTHOR(DRV_AUTHOR);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION(DRV_DESC);
MODULE_ALIAS("platform:bfin_mac");
#if defined(CONFIG_BFIN_MAC_USE_L1)
# define bfin_mac_alloc(dma_handle, size) l1_data_sram_zalloc(size)
@ -1089,8 +1090,9 @@ static struct platform_driver bfin_mac_driver = {
.resume = bfin_mac_resume,
.suspend = bfin_mac_suspend,
.driver = {
.name = DRV_NAME,
},
.name = DRV_NAME,
.owner = THIS_MODULE,
},
};
static int __init bfin_mac_init(void)
@ -1106,3 +1108,4 @@ static void __exit bfin_mac_cleanup(void)
}
module_exit(bfin_mac_cleanup);

2
drivers/net/cpmac.c
Просмотреть файл

@ -42,6 +42,7 @@
MODULE_AUTHOR("Eugene Konev <ejka@imfi.kspu.ru>");
MODULE_DESCRIPTION("TI AR7 ethernet driver (CPMAC)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:cpmac");
static int debug_level = 8;
static int dumb_switch;
@ -1103,6 +1104,7 @@ static int __devexit cpmac_remove(struct platform_device *pdev)
static struct platform_driver cpmac_driver = {
.driver.name = "cpmac",
.driver.owner = THIS_MODULE,
.probe = cpmac_probe,
.remove = __devexit_p(cpmac_remove),
};

1
drivers/net/dm9000.c
Просмотреть файл

@ -1418,3 +1418,4 @@ module_exit(dm9000_cleanup);
MODULE_AUTHOR("Sascha Hauer, Ben Dooks");
MODULE_DESCRIPTION("Davicom DM9000 network driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:dm9000");

6
drivers/net/e1000e/82571.c
Просмотреть файл

@ -1326,12 +1326,10 @@ struct e1000_info e1000_82571_info = {
.mac = e1000_82571,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_STATS_ICR_ICT
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_RESET_OVERWRITES_LAA /* errata */
| FLAG_TARC_SPEED_MODE_BIT /* errata */
@ -1347,12 +1345,10 @@ struct e1000_info e1000_82572_info = {
.mac = e1000_82572,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_STATS_ICR_ICT
| FLAG_TARC_SPEED_MODE_BIT, /* errata */
.pba = 38,
.get_variants = e1000_get_variants_82571,
@ -1365,11 +1361,9 @@ struct e1000_info e1000_82573_info = {
.mac = e1000_82573,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_STATS_ICR_ICT
| FLAG_HAS_SMART_POWER_DOWN
| FLAG_HAS_AMT
| FLAG_HAS_ERT

3
drivers/net/e1000e/defines.h
Просмотреть файл

@ -184,6 +184,7 @@
#define E1000_SWFW_EEP_SM 0x1
#define E1000_SWFW_PHY0_SM 0x2
#define E1000_SWFW_PHY1_SM 0x4
#define E1000_SWFW_CSR_SM 0x8
/* Device Control */
#define E1000_CTRL_FD 0x00000001 /* Full duplex.0=half; 1=full */
@ -527,8 +528,10 @@
#define PHY_ID2 0x03 /* Phy Id Reg (word 2) */
#define PHY_AUTONEG_ADV 0x04 /* Autoneg Advertisement */
#define PHY_LP_ABILITY 0x05 /* Link Partner Ability (Base Page) */
#define PHY_AUTONEG_EXP 0x06 /* Autoneg Expansion Reg */
#define PHY_1000T_CTRL 0x09 /* 1000Base-T Control Reg */
#define PHY_1000T_STATUS 0x0A /* 1000Base-T Status Reg */
#define PHY_EXT_STATUS 0x0F /* Extended Status Reg */
/* NVM Control */
#define E1000_EECD_SK 0x00000001 /* NVM Clock */

34
drivers/net/e1000e/e1000.h
Просмотреть файл

@ -64,11 +64,14 @@ struct e1000_info;
/* Tx/Rx descriptor defines */
#define E1000_DEFAULT_TXD 256
#define E1000_MAX_TXD 4096
#define E1000_MIN_TXD 80
#define E1000_MIN_TXD 64
#define E1000_DEFAULT_RXD 256
#define E1000_MAX_RXD 4096
#define E1000_MIN_RXD 80
#define E1000_MIN_RXD 64
#define E1000_MIN_ITR_USECS 10 /* 100000 irq/sec */
#define E1000_MAX_ITR_USECS 10000 /* 100 irq/sec */
/* Early Receive defines */
#define E1000_ERT_2048 0x100
@ -147,6 +150,18 @@ struct e1000_ring {
struct e1000_queue_stats stats;
};
/* PHY register snapshot values */
struct e1000_phy_regs {
u16 bmcr; /* basic mode control register */
u16 bmsr; /* basic mode status register */
u16 advertise; /* auto-negotiation advertisement */
u16 lpa; /* link partner ability register */
u16 expansion; /* auto-negotiation expansion reg */
u16 ctrl1000; /* 1000BASE-T control register */
u16 stat1000; /* 1000BASE-T status register */
u16 estatus; /* extended status register */
};
/* board specific private data structure */
struct e1000_adapter {
struct timer_list watchdog_timer;
@ -202,8 +217,8 @@ struct e1000_adapter {
/* Tx stats */
u64 tpt_old;
u64 colc_old;
u64 gotcl_old;
u32 gotcl;
u32 gotc;
u64 gotc_old;
u32 tx_timeout_count;
u32 tx_fifo_head;
u32 tx_head_addr;
@ -227,8 +242,8 @@ struct e1000_adapter {
u64 hw_csum_err;
u64 hw_csum_good;
u64 rx_hdr_split;
u64 gorcl_old;
u32 gorcl;
u32 gorc;
u64 gorc_old;
u32 alloc_rx_buff_failed;
u32 rx_dma_failed;
@ -250,6 +265,9 @@ struct e1000_adapter {
struct e1000_phy_info phy_info;
struct e1000_phy_stats phy_stats;
/* Snapshot of PHY registers */
struct e1000_phy_regs phy_regs;
struct e1000_ring test_tx_ring;
struct e1000_ring test_rx_ring;
u32 test_icr;
@ -286,8 +304,6 @@ struct e1000_info {
#define FLAG_HAS_CTRLEXT_ON_LOAD (1 << 5)
#define FLAG_HAS_SWSM_ON_LOAD (1 << 6)
#define FLAG_HAS_JUMBO_FRAMES (1 << 7)
#define FLAG_HAS_STATS_ICR_ICT (1 << 9)
#define FLAG_HAS_STATS_PTC_PRC (1 << 10)
#define FLAG_HAS_SMART_POWER_DOWN (1 << 11)
#define FLAG_IS_QUAD_PORT_A (1 << 12)
#define FLAG_IS_QUAD_PORT (1 << 13)
@ -433,6 +449,8 @@ extern s32 e1000e_read_kmrn_reg(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_phy_has_link_generic(struct e1000_hw *hw, u32 iterations,
u32 usec_interval, bool *success);
extern s32 e1000e_phy_reset_dsp(struct e1000_hw *hw);
extern s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data);
extern s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data);
extern s32 e1000e_check_downshift(struct e1000_hw *hw);
static inline s32 e1000_phy_hw_reset(struct e1000_hw *hw)

129
drivers/net/e1000e/es2lan.c
Просмотреть файл

@ -41,6 +41,7 @@
#define E1000_KMRNCTRLSTA_OFFSET_FIFO_CTRL 0x00
#define E1000_KMRNCTRLSTA_OFFSET_INB_CTRL 0x02
#define E1000_KMRNCTRLSTA_OFFSET_HD_CTRL 0x10
#define E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE 0x1F
#define E1000_KMRNCTRLSTA_FIFO_CTRL_RX_BYPASS 0x0008
#define E1000_KMRNCTRLSTA_FIFO_CTRL_TX_BYPASS 0x0800
@ -48,6 +49,7 @@
#define E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT 0x0004
#define E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT 0x0000
#define E1000_KMRNCTRLSTA_OPMODE_E_IDLE 0x2000
#define E1000_TCTL_EXT_GCEX_MASK 0x000FFC00 /* Gigabit Carry Extend Padding */
#define DEFAULT_TCTL_EXT_GCEX_80003ES2LAN 0x00010000
@ -85,6 +87,9 @@
/* Kumeran Mode Control Register (Page 193, Register 16) */
#define GG82563_KMCR_PASS_FALSE_CARRIER 0x0800
/* Max number of times Kumeran read/write should be validated */
#define GG82563_MAX_KMRN_RETRY 0x5
/* Power Management Control Register (Page 193, Register 20) */
#define GG82563_PMCR_ENABLE_ELECTRICAL_IDLE 0x0001
/* 1=Enable SERDES Electrical Idle */
@ -270,6 +275,7 @@ static s32 e1000_acquire_phy_80003es2lan(struct e1000_hw *hw)
u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
mask |= E1000_SWFW_CSR_SM;
return e1000_acquire_swfw_sync_80003es2lan(hw, mask);
}
@ -286,6 +292,8 @@ static void e1000_release_phy_80003es2lan(struct e1000_hw *hw)
u16 mask;
mask = hw->bus.func ? E1000_SWFW_PHY1_SM : E1000_SWFW_PHY0_SM;
mask |= E1000_SWFW_CSR_SM;
e1000_release_swfw_sync_80003es2lan(hw, mask);
}
@ -410,20 +418,27 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select;
u16 temp;
ret_val = e1000_acquire_phy_80003es2lan(hw);
if (ret_val)
return ret_val;
/* Select Configuration Page */
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT;
else
} else {
/*
* Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
if (ret_val) {
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
/*
* The "ready" bit in the MDIC register may be incorrectly set
@ -433,20 +448,21 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
ret_val = -E1000_ERR_PHY;
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
udelay(200);
ret_val = e1000e_read_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
udelay(200);
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
@ -467,20 +483,27 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
u32 page_select;
u16 temp;
ret_val = e1000_acquire_phy_80003es2lan(hw);
if (ret_val)
return ret_val;
/* Select Configuration Page */
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG)
if ((offset & MAX_PHY_REG_ADDRESS) < GG82563_MIN_ALT_REG) {
page_select = GG82563_PHY_PAGE_SELECT;
else
} else {
/*
* Use Alternative Page Select register to access
* registers 30 and 31
*/
page_select = GG82563_PHY_PAGE_SELECT_ALT;
}
temp = (u16)((u16)offset >> GG82563_PAGE_SHIFT);
ret_val = e1000e_write_phy_reg_m88(hw, page_select, temp);
if (ret_val)
ret_val = e1000e_write_phy_reg_mdic(hw, page_select, temp);
if (ret_val) {
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
/*
@ -491,18 +514,20 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
udelay(200);
/* ...and verify the command was successful. */
ret_val = e1000e_read_phy_reg_m88(hw, page_select, &temp);
ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp)
if (((u16)offset >> GG82563_PAGE_SHIFT) != temp) {
e1000_release_phy_80003es2lan(hw);
return -E1000_ERR_PHY;
}
udelay(200);
ret_val = e1000e_write_phy_reg_m88(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
udelay(200);
e1000_release_phy_80003es2lan(hw);
return ret_val;
}
@ -882,10 +907,10 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
struct e1000_phy_info *phy = &hw->phy;
s32 ret_val;
u32 ctrl_ext;
u16 data;
u32 i = 0;
u16 data, data2;
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
&data);
ret_val = e1e_rphy(hw, GG82563_PHY_MAC_SPEC_CTRL, &data);
if (ret_val)
return ret_val;
@ -893,8 +918,7 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
/* Use 25MHz for both link down and 1000Base-T for Tx clock. */
data |= GG82563_MSCR_TX_CLK_1000MBPS_25;
ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL,
data);
ret_val = e1e_wphy(hw, GG82563_PHY_MAC_SPEC_CTRL, data);
if (ret_val)
return ret_val;
@ -954,6 +978,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1000e_read_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
&data);
if (ret_val)
return ret_val;
data |= E1000_KMRNCTRLSTA_OPMODE_E_IDLE;
ret_val = e1000e_write_kmrn_reg(hw,
E1000_KMRNCTRLSTA_OFFSET_MAC2PHY_OPMODE,
data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_SPEC_CTRL_2, &data);
if (ret_val)
return ret_val;
@ -983,9 +1019,18 @@ static s32 e1000_copper_link_setup_gg82563_80003es2lan(struct e1000_hw *hw)
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &data);
if (ret_val)
return ret_val;
do {
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
&data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL,
&data2);
if (ret_val)
return ret_val;
i++;
} while ((data != data2) && (i < GG82563_MAX_KMRN_RETRY));
data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, data);
@ -1074,7 +1119,8 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
{
s32 ret_val;
u32 tipg;
u16 reg_data;
u32 i = 0;
u16 reg_data, reg_data2;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_10_100_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
@ -1088,9 +1134,16 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
tipg |= DEFAULT_TIPG_IPGT_10_100_80003ES2LAN;
ew32(TIPG, tipg);
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
if (ret_val)
return ret_val;
do {
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
if (ret_val)
return ret_val;
i++;
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
if (duplex == HALF_DUPLEX)
reg_data |= GG82563_KMCR_PASS_FALSE_CARRIER;
@ -1112,8 +1165,9 @@ static s32 e1000_cfg_kmrn_10_100_80003es2lan(struct e1000_hw *hw, u16 duplex)
static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
{
s32 ret_val;
u16 reg_data;
u16 reg_data, reg_data2;
u32 tipg;
u32 i = 0;
reg_data = E1000_KMRNCTRLSTA_HD_CTRL_1000_DEFAULT;
ret_val = e1000e_write_kmrn_reg(hw, E1000_KMRNCTRLSTA_OFFSET_HD_CTRL,
@ -1127,9 +1181,16 @@ static s32 e1000_cfg_kmrn_1000_80003es2lan(struct e1000_hw *hw)
tipg |= DEFAULT_TIPG_IPGT_1000_80003ES2LAN;
ew32(TIPG, tipg);
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
if (ret_val)
return ret_val;
do {
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data);
if (ret_val)
return ret_val;
ret_val = e1e_rphy(hw, GG82563_PHY_KMRN_MODE_CTRL, &reg_data2);
if (ret_val)
return ret_val;
i++;
} while ((reg_data != reg_data2) && (i < GG82563_MAX_KMRN_RETRY));
reg_data &= ~GG82563_KMCR_PASS_FALSE_CARRIER;
ret_val = e1e_wphy(hw, GG82563_PHY_KMRN_MODE_CTRL, reg_data);
@ -1231,12 +1292,10 @@ struct e1000_info e1000_es2_info = {
.mac = e1000_80003es2lan,
.flags = FLAG_HAS_HW_VLAN_FILTER
| FLAG_HAS_JUMBO_FRAMES
| FLAG_HAS_STATS_PTC_PRC
| FLAG_HAS_WOL
| FLAG_APME_IN_CTRL3
| FLAG_RX_CSUM_ENABLED
| FLAG_HAS_CTRLEXT_ON_LOAD
| FLAG_HAS_STATS_ICR_ICT
| FLAG_RX_NEEDS_RESTART /* errata */
| FLAG_TARC_SET_BIT_ZERO /* errata */
| FLAG_APME_CHECK_PORT_B

49
drivers/net/e1000e/ethtool.c
Просмотреть файл

@ -46,8 +46,8 @@ struct e1000_stats {
static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_packets", E1000_STAT(stats.gprc) },
{ "tx_packets", E1000_STAT(stats.gptc) },
{ "rx_bytes", E1000_STAT(stats.gorcl) },
{ "tx_bytes", E1000_STAT(stats.gotcl) },
{ "rx_bytes", E1000_STAT(stats.gorc) },
{ "tx_bytes", E1000_STAT(stats.gotc) },
{ "rx_broadcast", E1000_STAT(stats.bprc) },
{ "tx_broadcast", E1000_STAT(stats.bptc) },
{ "rx_multicast", E1000_STAT(stats.mprc) },
@ -83,7 +83,7 @@ static const struct e1000_stats e1000_gstrings_stats[] = {
{ "rx_flow_control_xoff", E1000_STAT(stats.xoffrxc) },
{ "tx_flow_control_xon", E1000_STAT(stats.xontxc) },
{ "tx_flow_control_xoff", E1000_STAT(stats.xofftxc) },
{ "rx_long_byte_count", E1000_STAT(stats.gorcl) },
{ "rx_long_byte_count", E1000_STAT(stats.gorc) },
{ "rx_csum_offload_good", E1000_STAT(hw_csum_good) },
{ "rx_csum_offload_errors", E1000_STAT(hw_csum_err) },
{ "rx_header_split", E1000_STAT(rx_hdr_split) },
@ -1770,6 +1770,47 @@ static int e1000_phys_id(struct net_device *netdev, u32 data)
return 0;
}
static int e1000_get_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
if (adapter->itr_setting <= 3)
ec->rx_coalesce_usecs = adapter->itr_setting;
else
ec->rx_coalesce_usecs = 1000000 / adapter->itr_setting;
return 0;
}
static int e1000_set_coalesce(struct net_device *netdev,
struct ethtool_coalesce *ec)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct e1000_hw *hw = &adapter->hw;
if ((ec->rx_coalesce_usecs > E1000_MAX_ITR_USECS) ||
((ec->rx_coalesce_usecs > 3) &&
(ec->rx_coalesce_usecs < E1000_MIN_ITR_USECS)) ||
(ec->rx_coalesce_usecs == 2))
return -EINVAL;
if (ec->rx_coalesce_usecs <= 3) {
adapter->itr = 20000;
adapter->itr_setting = ec->rx_coalesce_usecs;
} else {
adapter->itr = (1000000 / ec->rx_coalesce_usecs);
adapter->itr_setting = adapter->itr & ~3;
}
if (adapter->itr_setting != 0)
ew32(ITR, 1000000000 / (adapter->itr * 256));
else
ew32(ITR, 0);
return 0;
}
static int e1000_nway_reset(struct net_device *netdev)
{
struct e1000_adapter *adapter = netdev_priv(netdev);
@ -1845,6 +1886,8 @@ static const struct ethtool_ops e1000_ethtool_ops = {
.phys_id = e1000_phys_id,
.get_ethtool_stats = e1000_get_ethtool_stats,
.get_sset_count = e1000e_get_sset_count,
.get_coalesce = e1000_get_coalesce,
.set_coalesce = e1000_set_coalesce,
};
void e1000e_set_ethtool_ops(struct net_device *netdev)

12
drivers/net/e1000e/hw.h
Просмотреть файл

@ -592,10 +592,8 @@ struct e1000_hw_stats {
u64 bprc;
u64 mprc;
u64 gptc;
u64 gorcl;
u64 gorch;
u64 gotcl;
u64 gotch;
u64 gorc;
u64 gotc;
u64 rnbc;
u64 ruc;
u64 rfc;
@ -604,10 +602,8 @@ struct e1000_hw_stats {
u64 mgprc;
u64 mgpdc;
u64 mgptc;
u64 torl;
u64 torh;
u64 totl;
u64 toth;
u64 tor;
u64 tot;
u64 tpr;
u64 tpt;
u64 ptc64;

159
drivers/net/e1000e/netdev.c
Просмотреть файл

@ -46,7 +46,7 @@
#include "e1000.h"
#define DRV_VERSION "0.2.0"
#define DRV_VERSION "0.2.1"
char e1000e_driver_name[] = "e1000e";
const char e1000e_driver_version[] = DRV_VERSION;
@ -466,10 +466,10 @@ next_desc:
if (cleaned_count)
adapter->alloc_rx_buf(adapter, cleaned_count);
adapter->total_rx_packets += total_rx_packets;
adapter->total_rx_bytes += total_rx_bytes;
adapter->net_stats.rx_packets += total_rx_packets;
adapter->total_rx_packets += total_rx_packets;
adapter->net_stats.rx_bytes += total_rx_bytes;
adapter->net_stats.rx_packets += total_rx_packets;
return cleaned;
}
@ -606,8 +606,8 @@ static bool e1000_clean_tx_irq(struct e1000_adapter *adapter)
}
adapter->total_tx_bytes += total_tx_bytes;
adapter->total_tx_packets += total_tx_packets;
adapter->net_stats.tx_packets += total_tx_packets;
adapter->net_stats.tx_bytes += total_tx_bytes;
adapter->net_stats.tx_packets += total_tx_packets;
return cleaned;
}
@ -775,10 +775,10 @@ next_desc:
if (cleaned_count)
adapter->alloc_rx_buf(adapter, cleaned_count);
adapter->total_rx_packets += total_rx_packets;
adapter->total_rx_bytes += total_rx_bytes;
adapter->net_stats.rx_packets += total_rx_packets;
adapter->total_rx_packets += total_rx_packets;
adapter->net_stats.rx_bytes += total_rx_bytes;
adapter->net_stats.rx_packets += total_rx_packets;
return cleaned;
}
@ -2506,56 +2506,27 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.crcerrs += er32(CRCERRS);
adapter->stats.gprc += er32(GPRC);
adapter->stats.gorcl += er32(GORCL);
adapter->stats.gorch += er32(GORCH);
adapter->stats.gorc += er32(GORCL);
er32(GORCH); /* Clear gorc */
adapter->stats.bprc += er32(BPRC);
adapter->stats.mprc += er32(MPRC);
adapter->stats.roc += er32(ROC);
if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) {
adapter->stats.prc64 += er32(PRC64);
adapter->stats.prc127 += er32(PRC127);
adapter->stats.prc255 += er32(PRC255);
adapter->stats.prc511 += er32(PRC511);
adapter->stats.prc1023 += er32(PRC1023);
adapter->stats.prc1522 += er32(PRC1522);
adapter->stats.symerrs += er32(SYMERRS);
adapter->stats.sec += er32(SEC);
}
adapter->stats.mpc += er32(MPC);
adapter->stats.scc += er32(SCC);
adapter->stats.ecol += er32(ECOL);
adapter->stats.mcc += er32(MCC);
adapter->stats.latecol += er32(LATECOL);
adapter->stats.dc += er32(DC);
adapter->stats.rlec += er32(RLEC);
adapter->stats.xonrxc += er32(XONRXC);
adapter->stats.xontxc += er32(XONTXC);
adapter->stats.xoffrxc += er32(XOFFRXC);
adapter->stats.xofftxc += er32(XOFFTXC);
adapter->stats.fcruc += er32(FCRUC);
adapter->stats.gptc += er32(GPTC);
adapter->stats.gotcl += er32(GOTCL);
adapter->stats.gotch += er32(GOTCH);
adapter->stats.gotc += er32(GOTCL);
er32(GOTCH); /* Clear gotc */
adapter->stats.rnbc += er32(RNBC);
adapter->stats.ruc += er32(RUC);
adapter->stats.rfc += er32(RFC);
adapter->stats.rjc += er32(RJC);
adapter->stats.torl += er32(TORL);
adapter->stats.torh += er32(TORH);
adapter->stats.totl += er32(TOTL);
adapter->stats.toth += er32(TOTH);
adapter->stats.tpr += er32(TPR);
if (adapter->flags & FLAG_HAS_STATS_PTC_PRC) {
adapter->stats.ptc64 += er32(PTC64);
adapter->stats.ptc127 += er32(PTC127);
adapter->stats.ptc255 += er32(PTC255);
adapter->stats.ptc511 += er32(PTC511);
adapter->stats.ptc1023 += er32(PTC1023);
adapter->stats.ptc1522 += er32(PTC1522);
}
adapter->stats.mptc += er32(MPTC);
adapter->stats.bptc += er32(BPTC);
@ -2574,19 +2545,6 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
adapter->stats.tsctc += er32(TSCTC);
adapter->stats.tsctfc += er32(TSCTFC);
adapter->stats.iac += er32(IAC);
if (adapter->flags & FLAG_HAS_STATS_ICR_ICT) {
adapter->stats.icrxoc += er32(ICRXOC);
adapter->stats.icrxptc += er32(ICRXPTC);
adapter->stats.icrxatc += er32(ICRXATC);
adapter->stats.ictxptc += er32(ICTXPTC);
adapter->stats.ictxatc += er32(ICTXATC);
adapter->stats.ictxqec += er32(ICTXQEC);
adapter->stats.ictxqmtc += er32(ICTXQMTC);
adapter->stats.icrxdmtc += er32(ICRXDMTC);
}
/* Fill out the OS statistics structure */
adapter->net_stats.multicast = adapter->stats.mprc;
adapter->net_stats.collisions = adapter->stats.colc;
@ -2633,6 +2591,54 @@ void e1000e_update_stats(struct e1000_adapter *adapter)
spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
}
/**
* e1000_phy_read_status - Update the PHY register status snapshot
* @adapter: board private structure
**/
static void e1000_phy_read_status(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
struct e1000_phy_regs *phy = &adapter->phy_regs;
int ret_val;
unsigned long irq_flags;
spin_lock_irqsave(&adapter->stats_lock, irq_flags);
if ((er32(STATUS) & E1000_STATUS_LU) &&
(adapter->hw.phy.media_type == e1000_media_type_copper)) {
ret_val = e1e_rphy(hw, PHY_CONTROL, &phy->bmcr);
ret_val |= e1e_rphy(hw, PHY_STATUS, &phy->bmsr);
ret_val |= e1e_rphy(hw, PHY_AUTONEG_ADV, &phy->advertise);
ret_val |= e1e_rphy(hw, PHY_LP_ABILITY, &phy->lpa);
ret_val |= e1e_rphy(hw, PHY_AUTONEG_EXP, &phy->expansion);
ret_val |= e1e_rphy(hw, PHY_1000T_CTRL, &phy->ctrl1000);
ret_val |= e1e_rphy(hw, PHY_1000T_STATUS, &phy->stat1000);
ret_val |= e1e_rphy(hw, PHY_EXT_STATUS, &phy->estatus);
if (ret_val)
ndev_warn(adapter->netdev,
"Error reading PHY register\n");
} else {
/*
* Do not read PHY registers if link is not up
* Set values to typical power-on defaults
*/
phy->bmcr = (BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_FULLDPLX);
phy->bmsr = (BMSR_100FULL | BMSR_100HALF | BMSR_10FULL |
BMSR_10HALF | BMSR_ESTATEN | BMSR_ANEGCAPABLE |
BMSR_ERCAP);
phy->advertise = (ADVERTISE_PAUSE_ASYM | ADVERTISE_PAUSE_CAP |
ADVERTISE_ALL | ADVERTISE_CSMA);
phy->lpa = 0;
phy->expansion = EXPANSION_ENABLENPAGE;
phy->ctrl1000 = ADVERTISE_1000FULL;
phy->stat1000 = 0;
phy->estatus = (ESTATUS_1000_TFULL | ESTATUS_1000_THALF);
}
spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
}
static void e1000_print_link_info(struct e1000_adapter *adapter)
{
struct e1000_hw *hw = &adapter->hw;
@ -2745,6 +2751,7 @@ static void e1000_watchdog_task(struct work_struct *work)
if (!netif_carrier_ok(netdev)) {
bool txb2b = 1;
/* update snapshot of PHY registers on LSC */
e1000_phy_read_status(adapter);
mac->ops.get_link_up_info(&adapter->hw,
&adapter->link_speed,
&adapter->link_duplex);
@ -2842,10 +2849,10 @@ link_up:
mac->collision_delta = adapter->stats.colc - adapter->colc_old;
adapter->colc_old = adapter->stats.colc;
adapter->gorcl = adapter->stats.gorcl - adapter->gorcl_old;
adapter->gorcl_old = adapter->stats.gorcl;
adapter->gotcl = adapter->stats.gotcl - adapter->gotcl_old;
adapter->gotcl_old = adapter->stats.gotcl;
adapter->gorc = adapter->stats.gorc - adapter->gorc_old;
adapter->gorc_old = adapter->stats.gorc;
adapter->gotc = adapter->stats.gotc - adapter->gotc_old;
adapter->gotc_old = adapter->stats.gotc;
e1000e_update_adaptive(&adapter->hw);
@ -3500,7 +3507,6 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
{
struct e1000_adapter *adapter = netdev_priv(netdev);
struct mii_ioctl_data *data = if_mii(ifr);
unsigned long irq_flags;
if (adapter->hw.phy.media_type != e1000_media_type_copper)
return -EOPNOTSUPP;
@ -3512,13 +3518,40 @@ static int e1000_mii_ioctl(struct net_device *netdev, struct ifreq *ifr,
case SIOCGMIIREG:
if (!capable(CAP_NET_ADMIN))
return -EPERM;
spin_lock_irqsave(&adapter->stats_lock, irq_flags);
if (e1e_rphy(&adapter->hw, data->reg_num & 0x1F,
&data->val_out)) {
spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
switch (data->reg_num & 0x1F) {
case MII_BMCR:
data->val_out = adapter->phy_regs.bmcr;
break;
case MII_BMSR:
data->val_out = adapter->phy_regs.bmsr;
break;
case MII_PHYSID1:
data->val_out = (adapter->hw.phy.id >> 16);
break;
case MII_PHYSID2:
data->val_out = (adapter->hw.phy.id & 0xFFFF);
break;
case MII_ADVERTISE:
data->val_out = adapter->phy_regs.advertise;
break;
case MII_LPA:
data->val_out = adapter->phy_regs.lpa;
break;
case MII_EXPANSION:
data->val_out = adapter->phy_regs.expansion;
break;
case MII_CTRL1000:
data->val_out = adapter->phy_regs.ctrl1000;
break;
case MII_STAT1000:
data->val_out = adapter->phy_regs.stat1000;
break;
case MII_ESTATUS:
data->val_out = adapter->phy_regs.estatus;
break;
default:
return -EIO;
}
spin_unlock_irqrestore(&adapter->stats_lock, irq_flags);
break;
case SIOCSMIIREG:
default:
@ -3774,6 +3807,7 @@ static pci_ers_result_t e1000_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);
@ -3900,6 +3934,7 @@ static int __devinit e1000_probe(struct pci_dev *pdev,
goto err_pci_reg;
pci_set_master(pdev);
pci_save_state(pdev);
err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct e1000_adapter));

73
drivers/net/e1000e/phy.c
Просмотреть файл

@ -116,7 +116,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
}
/**
* e1000_read_phy_reg_mdic - Read MDI control register
* e1000e_read_phy_reg_mdic - Read MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to be read
* @data: pointer to the read data
@ -124,7 +124,7 @@ s32 e1000e_phy_reset_dsp(struct e1000_hw *hw)
* Reads the MDI control register in the PHY at offset and stores the
* information read to data.
**/
static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0;
@ -150,7 +150,7 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
* Increasing the time out as testing showed failures with
* the lower time out
*/
for (i = 0; i < 64; i++) {
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
@ -170,14 +170,14 @@ static s32 e1000_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
}
/**
* e1000_write_phy_reg_mdic - Write MDI control register
* e1000e_write_phy_reg_mdic - Write MDI control register
* @hw: pointer to the HW structure
* @offset: register offset to write to
* @data: data to write to register at offset
*
* Writes data to MDI control register in the PHY at offset.
**/
static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
{
struct e1000_phy_info *phy = &hw->phy;
u32 i, mdic = 0;
@ -199,9 +199,13 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
ew32(MDIC, mdic);
/* Poll the ready bit to see if the MDI read completed */
for (i = 0; i < E1000_GEN_POLL_TIMEOUT; i++) {
udelay(5);
/*
* Poll the ready bit to see if the MDI read completed
* Increasing the time out as testing showed failures with
* the lower time out
*/
for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
udelay(50);
mdic = er32(MDIC);
if (mdic & E1000_MDIC_READY)
break;
@ -210,6 +214,10 @@ static s32 e1000_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
hw_dbg(hw, "MDI Write did not complete\n");
return -E1000_ERR_PHY;
}
if (mdic & E1000_MDIC_ERROR) {
hw_dbg(hw, "MDI Error\n");
return -E1000_ERR_PHY;
}
return 0;
}
@ -232,9 +240,8 @@ s32 e1000e_read_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 *data)
if (ret_val)
return ret_val;
ret_val = e1000_read_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
hw->phy.ops.release_phy(hw);
@ -258,9 +265,8 @@ s32 e1000e_write_phy_reg_m88(struct e1000_hw *hw, u32 offset, u16 data)
if (ret_val)
return ret_val;
ret_val = e1000_write_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
hw->phy.ops.release_phy(hw);
@ -286,18 +292,17 @@ s32 e1000e_read_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 *data)
return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
if (ret_val) {
hw->phy.ops.release_phy(hw);
return ret_val;
}
}
ret_val = e1000_read_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_read_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
hw->phy.ops.release_phy(hw);
@ -322,18 +327,17 @@ s32 e1000e_write_phy_reg_igp(struct e1000_hw *hw, u32 offset, u16 data)
return ret_val;
if (offset > MAX_PHY_MULTI_PAGE_REG) {
ret_val = e1000_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
ret_val = e1000e_write_phy_reg_mdic(hw,
IGP01E1000_PHY_PAGE_SELECT,
(u16)offset);
if (ret_val) {
hw->phy.ops.release_phy(hw);
return ret_val;
}
}
ret_val = e1000_write_phy_reg_mdic(hw,
MAX_PHY_REG_ADDRESS & offset,
data);
ret_val = e1000e_write_phy_reg_mdic(hw, MAX_PHY_REG_ADDRESS & offset,
data);
hw->phy.ops.release_phy(hw);
@ -420,7 +424,9 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
/* For newer PHYs this bit is downshift enable */
if (phy->type == e1000_phy_m88)
phy_data |= M88E1000_PSCR_ASSERT_CRS_ON_TX;
/*
* Options:
@ -463,7 +469,7 @@ s32 e1000e_copper_link_setup_m88(struct e1000_hw *hw)
if (ret_val)
return ret_val;
if (phy->revision < 4) {
if ((phy->type == e1000_phy_m88) && (phy->revision < 4)) {
/*
* Force TX_CLK in the Extended PHY Specific Control Register
* to 25MHz clock.
@ -518,8 +524,11 @@ s32 e1000e_copper_link_setup_igp(struct e1000_hw *hw)
return ret_val;
}
/* Wait 15ms for MAC to configure PHY from NVM settings. */
msleep(15);
/*
* Wait 100ms for MAC to configure PHY from NVM settings, to avoid
* timeout issues when LFS is enabled.
*/
msleep(100);
/* disable lplu d0 during driver init */
ret_val = e1000_set_d0_lplu_state(hw, 0);
@ -1152,9 +1161,7 @@ s32 e1000e_set_d3_lplu_state(struct e1000_hw *hw, bool active)
if (!active) {
data &= ~IGP02E1000_PM_D3_LPLU;
ret_val = e1e_wphy(hw,
IGP02E1000_PHY_POWER_MGMT,
data);
ret_val = e1e_wphy(hw, IGP02E1000_PHY_POWER_MGMT, data);
if (ret_val)
return ret_val;
/*

4
drivers/net/ehea/ehea_main.c
Просмотреть файл

@ -2611,7 +2611,7 @@ static int ehea_stop(struct net_device *dev)
return ret;
}
void ehea_purge_sq(struct ehea_qp *orig_qp)
static void ehea_purge_sq(struct ehea_qp *orig_qp)
{
struct ehea_qp qp = *orig_qp;
struct ehea_qp_init_attr *init_attr = &qp.init_attr;
@ -2625,7 +2625,7 @@ void ehea_purge_sq(struct ehea_qp *orig_qp)
}
}
void ehea_flush_sq(struct ehea_port *port)
static void ehea_flush_sq(struct ehea_port *port)
{
int i;

432
drivers/net/forcedeth.c
Просмотреть файл

@ -96,6 +96,7 @@
#define DEV_HAS_PAUSEFRAME_TX_V2 0x10000 /* device supports tx pause frames version 2 */
#define DEV_HAS_PAUSEFRAME_TX_V3 0x20000 /* device supports tx pause frames version 3 */
#define DEV_NEED_TX_LIMIT 0x40000 /* device needs to limit tx */
#define DEV_HAS_GEAR_MODE 0x80000 /* device supports gear mode */
enum {
NvRegIrqStatus = 0x000,
@ -174,11 +175,13 @@ enum {
NvRegReceiverStatus = 0x98,
#define NVREG_RCVSTAT_BUSY 0x01
NvRegRandomSeed = 0x9c,
#define NVREG_RNDSEED_MASK 0x00ff
#define NVREG_RNDSEED_FORCE 0x7f00
#define NVREG_RNDSEED_FORCE2 0x2d00
#define NVREG_RNDSEED_FORCE3 0x7400
NvRegSlotTime = 0x9c,
#define NVREG_SLOTTIME_LEGBF_ENABLED 0x80000000
#define NVREG_SLOTTIME_10_100_FULL 0x00007f00
#define NVREG_SLOTTIME_1000_FULL 0x0003ff00
#define NVREG_SLOTTIME_HALF 0x0000ff00
#define NVREG_SLOTTIME_DEFAULT 0x00007f00
#define NVREG_SLOTTIME_MASK 0x000000ff
NvRegTxDeferral = 0xA0,
#define NVREG_TX_DEFERRAL_DEFAULT 0x15050f
@ -201,6 +204,11 @@ enum {
NvRegPhyInterface = 0xC0,
#define PHY_RGMII 0x10000000
NvRegBackOffControl = 0xC4,
#define NVREG_BKOFFCTRL_DEFAULT 0x70000000
#define NVREG_BKOFFCTRL_SEED_MASK 0x000003ff
#define NVREG_BKOFFCTRL_SELECT 24
#define NVREG_BKOFFCTRL_GEAR 12
NvRegTxRingPhysAddr = 0x100,
NvRegRxRingPhysAddr = 0x104,
@ -352,6 +360,7 @@ union ring_type {
#define NV_TX_LASTPACKET (1<<16)
#define NV_TX_RETRYERROR (1<<19)
#define NV_TX_RETRYCOUNT_MASK (0xF<<20)
#define NV_TX_FORCED_INTERRUPT (1<<24)
#define NV_TX_DEFERRED (1<<26)
#define NV_TX_CARRIERLOST (1<<27)
@ -362,6 +371,7 @@ union ring_type {
#define NV_TX2_LASTPACKET (1<<29)
#define NV_TX2_RETRYERROR (1<<18)
#define NV_TX2_RETRYCOUNT_MASK (0xF<<19)
#define NV_TX2_FORCED_INTERRUPT (1<<30)
#define NV_TX2_DEFERRED (1<<25)
#define NV_TX2_CARRIERLOST (1<<26)
@ -473,16 +483,22 @@ union ring_type {
#define DESC_VER_3 3
/* PHY defines */
#define PHY_OUI_MARVELL 0x5043
#define PHY_OUI_CICADA 0x03f1
#define PHY_OUI_VITESSE 0x01c1
#define PHY_OUI_REALTEK 0x0732
#define PHY_OUI_MARVELL 0x5043
#define PHY_OUI_CICADA 0x03f1
#define PHY_OUI_VITESSE 0x01c1
#define PHY_OUI_REALTEK 0x0732
#define PHY_OUI_REALTEK2 0x0020
#define PHYID1_OUI_MASK 0x03ff
#define PHYID1_OUI_SHFT 6
#define PHYID2_OUI_MASK 0xfc00
#define PHYID2_OUI_SHFT 10
#define PHYID2_MODEL_MASK 0x03f0
#define PHY_MODEL_MARVELL_E3016 0x220
#define PHY_MODEL_REALTEK_8211 0x0110
#define PHY_REV_MASK 0x0001
#define PHY_REV_REALTEK_8211B 0x0000
#define PHY_REV_REALTEK_8211C 0x0001
#define PHY_MODEL_REALTEK_8201 0x0200
#define PHY_MODEL_MARVELL_E3016 0x0220
#define PHY_MARVELL_E3016_INITMASK 0x0300
#define PHY_CICADA_INIT1 0x0f000
#define PHY_CICADA_INIT2 0x0e00
@ -509,10 +525,18 @@ union ring_type {
#define PHY_REALTEK_INIT_REG1 0x1f
#define PHY_REALTEK_INIT_REG2 0x19
#define PHY_REALTEK_INIT_REG3 0x13
#define PHY_REALTEK_INIT_REG4 0x14
#define PHY_REALTEK_INIT_REG5 0x18
#define PHY_REALTEK_INIT_REG6 0x11
#define PHY_REALTEK_INIT1 0x0000
#define PHY_REALTEK_INIT2 0x8e00
#define PHY_REALTEK_INIT3 0x0001
#define PHY_REALTEK_INIT4 0xad17
#define PHY_REALTEK_INIT5 0xfb54
#define PHY_REALTEK_INIT6 0xf5c7
#define PHY_REALTEK_INIT7 0x1000
#define PHY_REALTEK_INIT8 0x0003
#define PHY_REALTEK_INIT_MSK1 0x0003
#define PHY_GIGABIT 0x0100
@ -691,6 +715,7 @@ struct fe_priv {
int wolenabled;
unsigned int phy_oui;
unsigned int phy_model;
unsigned int phy_rev;
u16 gigabit;
int intr_test;
int recover_error;
@ -704,6 +729,7 @@ struct fe_priv {
u32 txrxctl_bits;
u32 vlanctl_bits;
u32 driver_data;
u32 device_id;
u32 register_size;
int rx_csum;
u32 mac_in_use;
@ -814,6 +840,16 @@ enum {
};
static int dma_64bit = NV_DMA_64BIT_ENABLED;
/*
* Crossover Detection
* Realtek 8201 phy + some OEM boards do not work properly.
*/
enum {
NV_CROSSOVER_DETECTION_DISABLED,
NV_CROSSOVER_DETECTION_ENABLED
};
static int phy_cross = NV_CROSSOVER_DETECTION_DISABLED;
static inline struct fe_priv *get_nvpriv(struct net_device *dev)
{
return netdev_priv(dev);
@ -1078,25 +1114,53 @@ static int phy_init(struct net_device *dev)
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
np->phy_rev == PHY_REV_REALTEK_8211B) {
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
if (np->phy_model == PHY_MODEL_REALTEK_8201) {
if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
phy_reserved |= PHY_REALTEK_INIT7;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
}
}
@ -1236,26 +1300,71 @@ static int phy_init(struct net_device *dev)
}
}
if (np->phy_oui == PHY_OUI_REALTEK) {
/* reset could have cleared these out, set them back */
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
if (np->phy_model == PHY_MODEL_REALTEK_8211 &&
np->phy_rev == PHY_REV_REALTEK_8211B) {
/* reset could have cleared these out, set them back */
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG4, PHY_REALTEK_INIT5)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG5, PHY_REALTEK_INIT6)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, PHY_REALTEK_INIT2)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG3, PHY_REALTEK_INIT4)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
if (np->phy_model == PHY_MODEL_REALTEK_8201) {
if (np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_32 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_33 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_34 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_35 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_36 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_37 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_38 ||
np->device_id == PCI_DEVICE_ID_NVIDIA_NVENET_39) {
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, MII_READ);
phy_reserved |= PHY_REALTEK_INIT7;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG6, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
if (phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
phy_reserved |= PHY_REALTEK_INIT3;
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
if (mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1)) {
printk(KERN_INFO "%s: phy init failed.\n", pci_name(np->pci_dev));
return PHY_ERROR;
}
}
}
}
@ -1769,6 +1878,115 @@ static inline u32 nv_get_empty_tx_slots(struct fe_priv *np)
return (u32)(np->tx_ring_size - ((np->tx_ring_size + (np->put_tx_ctx - np->get_tx_ctx)) % np->tx_ring_size));
}
static void nv_legacybackoff_reseed(struct net_device *dev)
{
u8 __iomem *base = get_hwbase(dev);
u32 reg;
u32 low;
int tx_status = 0;
reg = readl(base + NvRegSlotTime) & ~NVREG_SLOTTIME_MASK;
get_random_bytes(&low, sizeof(low));
reg |= low & NVREG_SLOTTIME_MASK;
/* Need to stop tx before change takes effect.
* Caller has already gained np->lock.
*/
tx_status = readl(base + NvRegTransmitterControl) & NVREG_XMITCTL_START;
if (tx_status)
nv_stop_tx(dev);
nv_stop_rx(dev);
writel(reg, base + NvRegSlotTime);
if (tx_status)
nv_start_tx(dev);
nv_start_rx(dev);
}
/* Gear Backoff Seeds */
#define BACKOFF_SEEDSET_ROWS 8
#define BACKOFF_SEEDSET_LFSRS 15
/* Known Good seed sets */
static const u32 main_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
{145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
{245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 385, 761, 790, 974},
{145, 155, 165, 175, 185, 196, 235, 245, 255, 265, 275, 285, 660, 690, 874},
{245, 255, 265, 575, 385, 298, 335, 345, 355, 366, 375, 386, 761, 790, 974},
{266, 265, 276, 585, 397, 208, 345, 355, 365, 376, 385, 396, 771, 700, 984},
{266, 265, 276, 586, 397, 208, 346, 355, 365, 376, 285, 396, 771, 700, 984},
{366, 365, 376, 686, 497, 308, 447, 455, 466, 476, 485, 496, 871, 800, 84},
{466, 465, 476, 786, 597, 408, 547, 555, 566, 576, 585, 597, 971, 900, 184}};
static const u32 gear_seedset[BACKOFF_SEEDSET_ROWS][BACKOFF_SEEDSET_LFSRS] = {
{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 397},
{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
{251, 262, 273, 324, 319, 508, 375, 364, 341, 371, 398, 193, 375, 30, 295},
{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395},
{351, 375, 373, 469, 551, 639, 477, 464, 441, 472, 498, 293, 476, 130, 395}};
static void nv_gear_backoff_reseed(struct net_device *dev)
{
u8 __iomem *base = get_hwbase(dev);
u32 miniseed1, miniseed2, miniseed2_reversed, miniseed3, miniseed3_reversed;
u32 temp, seedset, combinedSeed;
int i;
/* Setup seed for free running LFSR */
/* We are going to read the time stamp counter 3 times
and swizzle bits around to increase randomness */
get_random_bytes(&miniseed1, sizeof(miniseed1));
miniseed1 &= 0x0fff;
if (miniseed1 == 0)
miniseed1 = 0xabc;
get_random_bytes(&miniseed2, sizeof(miniseed2));
miniseed2 &= 0x0fff;
if (miniseed2 == 0)
miniseed2 = 0xabc;
miniseed2_reversed =
((miniseed2 & 0xF00) >> 8) |
(miniseed2 & 0x0F0) |
((miniseed2 & 0x00F) << 8);
get_random_bytes(&miniseed3, sizeof(miniseed3));
miniseed3 &= 0x0fff;
if (miniseed3 == 0)
miniseed3 = 0xabc;
miniseed3_reversed =
((miniseed3 & 0xF00) >> 8) |
(miniseed3 & 0x0F0) |
((miniseed3 & 0x00F) << 8);
combinedSeed = ((miniseed1 ^ miniseed2_reversed) << 12) |
(miniseed2 ^ miniseed3_reversed);
/* Seeds can not be zero */
if ((combinedSeed & NVREG_BKOFFCTRL_SEED_MASK) == 0)
combinedSeed |= 0x08;
if ((combinedSeed & (NVREG_BKOFFCTRL_SEED_MASK << NVREG_BKOFFCTRL_GEAR)) == 0)
combinedSeed |= 0x8000;
/* No need to disable tx here */
temp = NVREG_BKOFFCTRL_DEFAULT | (0 << NVREG_BKOFFCTRL_SELECT);
temp |= combinedSeed & NVREG_BKOFFCTRL_SEED_MASK;
temp |= combinedSeed >> NVREG_BKOFFCTRL_GEAR;
writel(temp,base + NvRegBackOffControl);
/* Setup seeds for all gear LFSRs. */
get_random_bytes(&seedset, sizeof(seedset));
seedset = seedset % BACKOFF_SEEDSET_ROWS;
for (i = 1; i <= BACKOFF_SEEDSET_LFSRS; i++)
{
temp = NVREG_BKOFFCTRL_DEFAULT | (i << NVREG_BKOFFCTRL_SELECT);
temp |= main_seedset[seedset][i-1] & 0x3ff;
temp |= ((gear_seedset[seedset][i-1] & 0x3ff) << NVREG_BKOFFCTRL_GEAR);
writel(temp, base + NvRegBackOffControl);
}
}
/*
* nv_start_xmit: dev->hard_start_xmit function
* Called with netif_tx_lock held.
@ -2088,6 +2306,8 @@ static void nv_tx_done(struct net_device *dev)
dev->stats.tx_fifo_errors++;
if (flags & NV_TX_CARRIERLOST)
dev->stats.tx_carrier_errors++;
if ((flags & NV_TX_RETRYERROR) && !(flags & NV_TX_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
@ -2103,6 +2323,8 @@ static void nv_tx_done(struct net_device *dev)
dev->stats.tx_fifo_errors++;
if (flags & NV_TX2_CARRIERLOST)
dev->stats.tx_carrier_errors++;
if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK))
nv_legacybackoff_reseed(dev);
dev->stats.tx_errors++;
} else {
dev->stats.tx_packets++;
@ -2144,6 +2366,15 @@ static void nv_tx_done_optimized(struct net_device *dev, int limit)
if (flags & NV_TX2_LASTPACKET) {
if (!(flags & NV_TX2_ERROR))
dev->stats.tx_packets++;
else {
if ((flags & NV_TX2_RETRYERROR) && !(flags & NV_TX2_RETRYCOUNT_MASK)) {
if (np->driver_data & DEV_HAS_GEAR_MODE)
nv_gear_backoff_reseed(dev);
else
nv_legacybackoff_reseed(dev);
}
}
dev_kfree_skb_any(np->get_tx_ctx->skb);
np->get_tx_ctx->skb = NULL;
@ -2905,15 +3136,14 @@ set_speed:
}
if (np->gigabit == PHY_GIGABIT) {
phyreg = readl(base + NvRegRandomSeed);
phyreg = readl(base + NvRegSlotTime);
phyreg &= ~(0x3FF00);
if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_10)
phyreg |= NVREG_RNDSEED_FORCE3;
else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_100)
phyreg |= NVREG_RNDSEED_FORCE2;
if (((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_10) ||
((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_100))
phyreg |= NVREG_SLOTTIME_10_100_FULL;
else if ((np->linkspeed & 0xFFF) == NVREG_LINKSPEED_1000)
phyreg |= NVREG_RNDSEED_FORCE;
writel(phyreg, base + NvRegRandomSeed);
phyreg |= NVREG_SLOTTIME_1000_FULL;
writel(phyreg, base + NvRegSlotTime);
}
phyreg = readl(base + NvRegPhyInterface);
@ -4843,6 +5073,7 @@ static int nv_open(struct net_device *dev)
u8 __iomem *base = get_hwbase(dev);
int ret = 1;
int oom, i;
u32 low;
dprintk(KERN_DEBUG "nv_open: begin\n");
@ -4902,8 +5133,20 @@ static int nv_open(struct net_device *dev)
writel(np->rx_buf_sz, base + NvRegOffloadConfig);
writel(readl(base + NvRegReceiverStatus), base + NvRegReceiverStatus);
get_random_bytes(&i, sizeof(i));
writel(NVREG_RNDSEED_FORCE | (i&NVREG_RNDSEED_MASK), base + NvRegRandomSeed);
get_random_bytes(&low, sizeof(low));
low &= NVREG_SLOTTIME_MASK;
if (np->desc_ver == DESC_VER_1) {
writel(low|NVREG_SLOTTIME_DEFAULT, base + NvRegSlotTime);
} else {
if (!(np->driver_data & DEV_HAS_GEAR_MODE)) {
/* setup legacy backoff */
writel(NVREG_SLOTTIME_LEGBF_ENABLED|NVREG_SLOTTIME_10_100_FULL|low, base + NvRegSlotTime);
} else {
writel(NVREG_SLOTTIME_10_100_FULL, base + NvRegSlotTime);
nv_gear_backoff_reseed(dev);
}
}
writel(NVREG_TX_DEFERRAL_DEFAULT, base + NvRegTxDeferral);
writel(NVREG_RX_DEFERRAL_DEFAULT, base + NvRegRxDeferral);
if (poll_interval == -1) {
@ -5110,6 +5353,8 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
/* copy of driver data */
np->driver_data = id->driver_data;
/* copy of device id */
np->device_id = id->device;
/* handle different descriptor versions */
if (id->driver_data & DEV_HAS_HIGH_DMA) {
@ -5399,6 +5644,14 @@ static int __devinit nv_probe(struct pci_dev *pci_dev, const struct pci_device_i
pci_name(pci_dev), id1, id2, phyaddr);
np->phyaddr = phyaddr;
np->phy_oui = id1 | id2;
/* Realtek hardcoded phy id1 to all zero's on certain phys */
if (np->phy_oui == PHY_OUI_REALTEK2)
np->phy_oui = PHY_OUI_REALTEK;
/* Setup phy revision for Realtek */
if (np->phy_oui == PHY_OUI_REALTEK && np->phy_model == PHY_MODEL_REALTEK_8211)
np->phy_rev = mii_rw(dev, phyaddr, MII_RESV1, MII_READ) & PHY_REV_MASK;
break;
}
if (i == 33) {
@ -5477,6 +5730,28 @@ out:
return err;
}
static void nv_restore_phy(struct net_device *dev)
{
struct fe_priv *np = netdev_priv(dev);
u16 phy_reserved, mii_control;
if (np->phy_oui == PHY_OUI_REALTEK &&
np->phy_model == PHY_MODEL_REALTEK_8201 &&
phy_cross == NV_CROSSOVER_DETECTION_DISABLED) {
mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT3);
phy_reserved = mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, MII_READ);
phy_reserved &= ~PHY_REALTEK_INIT_MSK1;
phy_reserved |= PHY_REALTEK_INIT8;
mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG2, phy_reserved);
mii_rw(dev, np->phyaddr, PHY_REALTEK_INIT_REG1, PHY_REALTEK_INIT1);
/* restart auto negotiation */
mii_control = mii_rw(dev, np->phyaddr, MII_BMCR, MII_READ);
mii_control |= (BMCR_ANRESTART | BMCR_ANENABLE);
mii_rw(dev, np->phyaddr, MII_BMCR, mii_control);
}
}
static void __devexit nv_remove(struct pci_dev *pci_dev)
{
struct net_device *dev = pci_get_drvdata(pci_dev);
@ -5493,6 +5768,9 @@ static void __devexit nv_remove(struct pci_dev *pci_dev)
writel(readl(base + NvRegTransmitPoll) & ~NVREG_TRANSMITPOLL_MAC_ADDR_REV,
base + NvRegTransmitPoll);
/* restore any phy related changes */
nv_restore_phy(dev);
/* free all structures */
free_rings(dev);
iounmap(get_hwbase(dev));
@ -5632,83 +5910,83 @@ static struct pci_device_id pci_tbl[] = {
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_20),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_21),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_22),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP65 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_23),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_LARGEDESC|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_24),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_25),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_26),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP67 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_27),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_28),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_29),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_30),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP73 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_31),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_HIGH_DMA|DEV_HAS_POWER_CNTRL|DEV_HAS_MSI|DEV_HAS_PAUSEFRAME_TX_V1|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_32),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_33),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_34),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP77 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_35),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V2|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_36),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_37),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_38),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{ /* MCP79 Ethernet Controller */
PCI_DEVICE(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_39),
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT,
.driver_data = DEV_NEED_TIMERIRQ|DEV_NEED_LINKTIMER|DEV_HAS_CHECKSUM|DEV_HAS_HIGH_DMA|DEV_HAS_MSI|DEV_HAS_POWER_CNTRL|DEV_HAS_PAUSEFRAME_TX_V3|DEV_HAS_STATISTICS_V2|DEV_HAS_TEST_EXTENDED|DEV_HAS_MGMT_UNIT|DEV_HAS_CORRECT_MACADDR|DEV_HAS_COLLISION_FIX|DEV_NEED_TX_LIMIT|DEV_HAS_GEAR_MODE,
},
{0,},
};
@ -5744,6 +6022,8 @@ module_param(msix, int, 0);
MODULE_PARM_DESC(msix, "MSIX interrupts are enabled by setting to 1 and disabled by setting to 0.");
module_param(dma_64bit, int, 0);
MODULE_PARM_DESC(dma_64bit, "High DMA is enabled by setting to 1 and disabled by setting to 0.");
module_param(phy_cross, int, 0);
MODULE_PARM_DESC(phy_cross, "Phy crossover detection for Realtek 8201 phy is enabled by setting to 1 and disabled by setting to 0.");
MODULE_AUTHOR("Manfred Spraul <manfred@colorfullife.com>");
MODULE_DESCRIPTION("Reverse Engineered nForce ethernet driver");

104
drivers/net/gianfar.c
Просмотреть файл

@ -98,7 +98,6 @@
#include "gianfar_mii.h"
#define TX_TIMEOUT (1*HZ)
#define SKB_ALLOC_TIMEOUT 1000000
#undef BRIEF_GFAR_ERRORS
#undef VERBOSE_GFAR_ERRORS
@ -115,7 +114,9 @@ static int gfar_enet_open(struct net_device *dev);
static int gfar_start_xmit(struct sk_buff *skb, struct net_device *dev);
static void gfar_timeout(struct net_device *dev);
static int gfar_close(struct net_device *dev);
struct sk_buff *gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp);
struct sk_buff *gfar_new_skb(struct net_device *dev);
static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
struct sk_buff *skb);
static int gfar_set_mac_address(struct net_device *dev);
static int gfar_change_mtu(struct net_device *dev, int new_mtu);
static irqreturn_t gfar_error(int irq, void *dev_id);
@ -783,14 +784,21 @@ int startup_gfar(struct net_device *dev)
rxbdp = priv->rx_bd_base;
for (i = 0; i < priv->rx_ring_size; i++) {
struct sk_buff *skb = NULL;
struct sk_buff *skb;
rxbdp->status = 0;
skb = gfar_new_skb(dev);
skb = gfar_new_skb(dev, rxbdp);
if (!skb) {
printk(KERN_ERR "%s: Can't allocate RX buffers\n",
dev->name);
goto err_rxalloc_fail;
}
priv->rx_skbuff[i] = skb;
gfar_new_rxbdp(dev, rxbdp, skb);
rxbdp++;
}
@ -916,6 +924,7 @@ rx_irq_fail:
tx_irq_fail:
free_irq(priv->interruptError, dev);
err_irq_fail:
err_rxalloc_fail:
rx_skb_fail:
free_skb_resources(priv);
tx_skb_fail:
@ -1328,18 +1337,37 @@ static irqreturn_t gfar_transmit(int irq, void *dev_id)
return IRQ_HANDLED;
}
struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
static void gfar_new_rxbdp(struct net_device *dev, struct rxbd8 *bdp,
struct sk_buff *skb)
{
struct gfar_private *priv = netdev_priv(dev);
u32 * status_len = (u32 *)bdp;
u16 flags;
bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
priv->rx_buffer_size, DMA_FROM_DEVICE);
flags = RXBD_EMPTY | RXBD_INTERRUPT;
if (bdp == priv->rx_bd_base + priv->rx_ring_size - 1)
flags |= RXBD_WRAP;
eieio();
*status_len = (u32)flags << 16;
}
struct sk_buff * gfar_new_skb(struct net_device *dev)
{
unsigned int alignamount;
struct gfar_private *priv = netdev_priv(dev);
struct sk_buff *skb = NULL;
unsigned int timeout = SKB_ALLOC_TIMEOUT;
/* We have to allocate the skb, so keep trying till we succeed */
while ((!skb) && timeout--)
skb = dev_alloc_skb(priv->rx_buffer_size + RXBUF_ALIGNMENT);
skb = netdev_alloc_skb(dev, priv->rx_buffer_size + RXBUF_ALIGNMENT);
if (NULL == skb)
if (!skb)
return NULL;
alignamount = RXBUF_ALIGNMENT -
@ -1350,15 +1378,6 @@ struct sk_buff * gfar_new_skb(struct net_device *dev, struct rxbd8 *bdp)
*/
skb_reserve(skb, alignamount);
bdp->bufPtr = dma_map_single(&dev->dev, skb->data,
priv->rx_buffer_size, DMA_FROM_DEVICE);
bdp->length = 0;
/* Mark the buffer empty */
eieio();
bdp->status |= (RXBD_EMPTY | RXBD_INTERRUPT);
return skb;
}
@ -1544,10 +1563,31 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
bdp = priv->cur_rx;
while (!((bdp->status & RXBD_EMPTY) || (--rx_work_limit < 0))) {
struct sk_buff *newskb;
rmb();
/* Add another skb for the future */
newskb = gfar_new_skb(dev);
skb = priv->rx_skbuff[priv->skb_currx];
if ((bdp->status & RXBD_LAST) && !(bdp->status & RXBD_ERR)) {
/* We drop the frame if we failed to allocate a new buffer */
if (unlikely(!newskb || !(bdp->status & RXBD_LAST) ||
bdp->status & RXBD_ERR)) {
count_errors(bdp->status, dev);
if (unlikely(!newskb))
newskb = skb;
if (skb) {
dma_unmap_single(&priv->dev->dev,
bdp->bufPtr,
priv->rx_buffer_size,
DMA_FROM_DEVICE);
dev_kfree_skb_any(skb);
}
} else {
/* Increment the number of packets */
dev->stats.rx_packets++;
howmany++;
@ -1558,23 +1598,14 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
gfar_process_frame(dev, skb, pkt_len);
dev->stats.rx_bytes += pkt_len;
} else {
count_errors(bdp->status, dev);
if (skb)
dev_kfree_skb_any(skb);
priv->rx_skbuff[priv->skb_currx] = NULL;
}
dev->last_rx = jiffies;
/* Clear the status flags for this buffer */
bdp->status &= ~RXBD_STATS;
priv->rx_skbuff[priv->skb_currx] = newskb;
/* Add another skb for the future */
skb = gfar_new_skb(dev, bdp);
priv->rx_skbuff[priv->skb_currx] = skb;
/* Setup the new bdp */
gfar_new_rxbdp(dev, bdp, newskb);
/* Update to the next pointer */
if (bdp->status & RXBD_WRAP)
@ -1584,9 +1615,8 @@ int gfar_clean_rx_ring(struct net_device *dev, int rx_work_limit)
/* update to point at the next skb */
priv->skb_currx =
(priv->skb_currx +
1) & RX_RING_MOD_MASK(priv->rx_ring_size);
(priv->skb_currx + 1) &
RX_RING_MOD_MASK(priv->rx_ring_size);
}
/* Update the current rxbd pointer to be the next one */
@ -2001,12 +2031,16 @@ static irqreturn_t gfar_error(int irq, void *dev_id)
return IRQ_HANDLED;
}
/* work with hotplug and coldplug */
MODULE_ALIAS("platform:fsl-gianfar");
/* Structure for a device driver */
static struct platform_driver gfar_driver = {
.probe = gfar_probe,
.remove = gfar_remove,
.driver = {
.name = "fsl-gianfar",
.owner = THIS_MODULE,
},
};

83
drivers/net/ibm_newemac/core.c
Просмотреть файл

@ -43,6 +43,8 @@
#include <asm/io.h>
#include <asm/dma.h>
#include <asm/uaccess.h>
#include <asm/dcr.h>
#include <asm/dcr-regs.h>
#include "core.h"
@ -127,10 +129,35 @@ static struct device_node *emac_boot_list[EMAC_BOOT_LIST_SIZE];
static inline void emac_report_timeout_error(struct emac_instance *dev,
const char *error)
{
if (net_ratelimit())
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX |
EMAC_FTR_440EP_PHY_CLK_FIX))
DBG(dev, "%s" NL, error);
else if (net_ratelimit())
printk(KERN_ERR "%s: %s\n", dev->ndev->name, error);
}
/* EMAC PHY clock workaround:
* 440EP/440GR has more sane SDR0_MFR register implementation than 440GX,
* which allows controlling each EMAC clock
*/
static inline void emac_rx_clk_tx(struct emac_instance *dev)
{
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR,
0, SDR0_MFR_ECS >> dev->cell_index);
#endif
}
static inline void emac_rx_clk_default(struct emac_instance *dev)
{
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440EP_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR,
SDR0_MFR_ECS >> dev->cell_index, 0);
#endif
}
/* PHY polling intervals */
#define PHY_POLL_LINK_ON HZ
#define PHY_POLL_LINK_OFF (HZ / 5)
@ -524,7 +551,10 @@ static int emac_configure(struct emac_instance *dev)
rx_size = dev->rx_fifo_size_gige;
if (dev->ndev->mtu > ETH_DATA_LEN) {
mr1 |= EMAC_MR1_JPSM;
if (emac_has_feature(dev, EMAC_FTR_EMAC4))
mr1 |= EMAC4_MR1_JPSM;
else
mr1 |= EMAC_MR1_JPSM;
dev->stop_timeout = STOP_TIMEOUT_1000_JUMBO;
} else
dev->stop_timeout = STOP_TIMEOUT_1000;
@ -708,7 +738,7 @@ static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg)
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
/* Wait for management interface to become idle */
n = 10;
n = 20;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@ -733,7 +763,7 @@ static int __emac_mdio_read(struct emac_instance *dev, u8 id, u8 reg)
out_be32(&p->stacr, r);
/* Wait for read to complete */
n = 100;
n = 200;
while (!emac_phy_done(dev, (r = in_be32(&p->stacr)))) {
udelay(1);
if (!--n) {
@ -780,7 +810,7 @@ static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg,
rgmii_get_mdio(dev->rgmii_dev, dev->rgmii_port);
/* Wait for management interface to be idle */
n = 10;
n = 20;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@ -806,7 +836,7 @@ static void __emac_mdio_write(struct emac_instance *dev, u8 id, u8 reg,
out_be32(&p->stacr, r);
/* Wait for write to complete */
n = 100;
n = 200;
while (!emac_phy_done(dev, in_be32(&p->stacr))) {
udelay(1);
if (!--n) {
@ -1094,9 +1124,11 @@ static int emac_open(struct net_device *ndev)
int link_poll_interval;
if (dev->phy.def->ops->poll_link(&dev->phy)) {
dev->phy.def->ops->read_link(&dev->phy);
emac_rx_clk_default(dev);
netif_carrier_on(dev->ndev);
link_poll_interval = PHY_POLL_LINK_ON;
} else {
emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
link_poll_interval = PHY_POLL_LINK_OFF;
}
@ -1174,6 +1206,7 @@ static void emac_link_timer(struct work_struct *work)
if (dev->phy.def->ops->poll_link(&dev->phy)) {
if (!netif_carrier_ok(dev->ndev)) {
emac_rx_clk_default(dev);
/* Get new link parameters */
dev->phy.def->ops->read_link(&dev->phy);
@ -1186,6 +1219,7 @@ static void emac_link_timer(struct work_struct *work)
link_poll_interval = PHY_POLL_LINK_ON;
} else {
if (netif_carrier_ok(dev->ndev)) {
emac_rx_clk_tx(dev);
netif_carrier_off(dev->ndev);
netif_tx_disable(dev->ndev);
emac_reinitialize(dev);
@ -2237,7 +2271,7 @@ static int __devinit emac_of_bus_notify(struct notifier_block *nb,
return 0;
}
static struct notifier_block emac_of_bus_notifier = {
static struct notifier_block emac_of_bus_notifier __devinitdata = {
.notifier_call = emac_of_bus_notify
};
@ -2330,6 +2364,19 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
dev->phy.mdio_read = emac_mdio_read;
dev->phy.mdio_write = emac_mdio_write;
/* Enable internal clock source */
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
#endif
/* PHY clock workaround */
emac_rx_clk_tx(dev);
/* Enable internal clock source on 440GX*/
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR, 0, SDR0_MFR_ECS);
#endif
/* Configure EMAC with defaults so we can at least use MDIO
* This is needed mostly for 440GX
*/
@ -2362,6 +2409,12 @@ static int __devinit emac_init_phy(struct emac_instance *dev)
if (!emac_mii_phy_probe(&dev->phy, i))
break;
}
/* Enable external clock source */
#ifdef CONFIG_PPC_DCR_NATIVE
if (emac_has_feature(dev, EMAC_FTR_440GX_PHY_CLK_FIX))
dcri_clrset(SDR0, SDR0_MFR, SDR0_MFR_ECS, 0);
#endif
mutex_unlock(&emac_phy_map_lock);
if (i == 0x20) {
printk(KERN_WARNING "%s: can't find PHY!\n", np->full_name);
@ -2487,8 +2540,15 @@ static int __devinit emac_init_config(struct emac_instance *dev)
}
/* Check EMAC version */
if (of_device_is_compatible(np, "ibm,emac4"))
if (of_device_is_compatible(np, "ibm,emac4")) {
dev->features |= EMAC_FTR_EMAC4;
if (of_device_is_compatible(np, "ibm,emac-440gx"))
dev->features |= EMAC_FTR_440GX_PHY_CLK_FIX;
} else {
if (of_device_is_compatible(np, "ibm,emac-440ep") ||
of_device_is_compatible(np, "ibm,emac-440gr"))
dev->features |= EMAC_FTR_440EP_PHY_CLK_FIX;
}
/* Fixup some feature bits based on the device tree */
if (of_get_property(np, "has-inverted-stacr-oc", NULL))
@ -2559,8 +2619,11 @@ static int __devinit emac_probe(struct of_device *ofdev,
struct device_node **blist = NULL;
int err, i;
/* Skip unused/unwired EMACS */
if (of_get_property(np, "unused", NULL))
/* Skip unused/unwired EMACS. We leave the check for an unused
* property here for now, but new flat device trees should set a
* status property to "disabled" instead.
*/
if (of_get_property(np, "unused", NULL) || !of_device_is_available(np))
return -ENODEV;
/* Find ourselves in the bootlist if we are there */

14
drivers/net/ibm_newemac/core.h
Просмотреть файл

@ -301,6 +301,14 @@ struct emac_instance {
* Set if we have new type STACR with STAOPC
*/
#define EMAC_FTR_HAS_NEW_STACR 0x00000040
/*
* Set if we need phy clock workaround for 440gx
*/
#define EMAC_FTR_440GX_PHY_CLK_FIX 0x00000080
/*
* Set if we need phy clock workaround for 440ep or 440gr
*/
#define EMAC_FTR_440EP_PHY_CLK_FIX 0x00000100
/* Right now, we don't quite handle the always/possible masks on the
@ -312,8 +320,8 @@ enum {
EMAC_FTRS_POSSIBLE =
#ifdef CONFIG_IBM_NEW_EMAC_EMAC4
EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
EMAC_FTR_STACR_OC_INVERT |
EMAC_FTR_EMAC4 | EMAC_FTR_HAS_NEW_STACR |
EMAC_FTR_STACR_OC_INVERT | EMAC_FTR_440GX_PHY_CLK_FIX |
#endif
#ifdef CONFIG_IBM_NEW_EMAC_TAH
EMAC_FTR_HAS_TAH |
@ -324,7 +332,7 @@ enum {
#ifdef CONFIG_IBM_NEW_EMAC_RGMII
EMAC_FTR_HAS_RGMII |
#endif
0,
EMAC_FTR_440EP_PHY_CLK_FIX,
};
static inline int emac_has_feature(struct emac_instance *dev,

20
drivers/net/ibm_newemac/mal.c
Просмотреть файл

@ -61,8 +61,8 @@ int __devinit mal_register_commac(struct mal_instance *mal,
return 0;
}
void __devexit mal_unregister_commac(struct mal_instance *mal,
struct mal_commac *commac)
void mal_unregister_commac(struct mal_instance *mal,
struct mal_commac *commac)
{
unsigned long flags;
@ -136,6 +136,14 @@ void mal_enable_rx_channel(struct mal_instance *mal, int channel)
{
unsigned long flags;
/*
* On some 4xx PPC's (e.g. 460EX/GT), the rx channel is a multiple
* of 8, but enabling in MAL_RXCASR needs the divided by 8 value
* for the bitmask
*/
if (!(channel % 8))
channel >>= 3;
spin_lock_irqsave(&mal->lock, flags);
MAL_DBG(mal, "enable_rx(%d)" NL, channel);
@ -148,6 +156,14 @@ void mal_enable_rx_channel(struct mal_instance *mal, int channel)
void mal_disable_rx_channel(struct mal_instance *mal, int channel)
{
/*
* On some 4xx PPC's (e.g. 460EX/GT), the rx channel is a multiple
* of 8, but enabling in MAL_RXCASR needs the divided by 8 value
* for the bitmask
*/
if (!(channel % 8))
channel >>= 3;
set_mal_dcrn(mal, MAL_RXCARR, MAL_CHAN_MASK(channel));
MAL_DBG(mal, "disable_rx(%d)" NL, channel);

2
drivers/net/ibm_newemac/rgmii.c
Просмотреть файл

@ -179,7 +179,7 @@ void rgmii_put_mdio(struct of_device *ofdev, int input)
mutex_unlock(&dev->lock);
}
void __devexit rgmii_detach(struct of_device *ofdev, int input)
void rgmii_detach(struct of_device *ofdev, int input)
{
struct rgmii_instance *dev = dev_get_drvdata(&ofdev->dev);
struct rgmii_regs __iomem *p = dev->base;

2
drivers/net/ibm_newemac/tah.c
Просмотреть файл

@ -35,7 +35,7 @@ int __devinit tah_attach(struct of_device *ofdev, int channel)
return 0;
}
void __devexit tah_detach(struct of_device *ofdev, int channel)
void tah_detach(struct of_device *ofdev, int channel)
{
struct tah_instance *dev = dev_get_drvdata(&ofdev->dev);

2
drivers/net/ibm_newemac/zmii.c
Просмотреть файл

@ -189,7 +189,7 @@ void zmii_set_speed(struct of_device *ofdev, int input, int speed)
mutex_unlock(&dev->lock);
}
void __devexit zmii_detach(struct of_device *ofdev, int input)
void zmii_detach(struct of_device *ofdev, int input)
{
struct zmii_instance *dev = dev_get_drvdata(&ofdev->dev);

2
drivers/net/igb/igb_main.c
Просмотреть файл

@ -871,6 +871,7 @@ static int __devinit igb_probe(struct pci_dev *pdev,
goto err_pci_reg;
pci_set_master(pdev);
pci_save_state(pdev);
err = -ENOMEM;
netdev = alloc_etherdev(sizeof(struct igb_adapter));
@ -4079,6 +4080,7 @@ static pci_ers_result_t igb_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);

2
drivers/net/irda/ali-ircc.c
Просмотреть файл

@ -60,6 +60,7 @@ static struct platform_driver ali_ircc_driver = {
.resume = ali_ircc_resume,
.driver = {
.name = ALI_IRCC_DRIVER_NAME,
.owner = THIS_MODULE,
},
};
@ -2256,6 +2257,7 @@ static void FIR2SIR(int iobase)
MODULE_AUTHOR("Benjamin Kong <benjamin_kong@ali.com.tw>");
MODULE_DESCRIPTION("ALi FIR Controller Driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" ALI_IRCC_DRIVER_NAME);
module_param_array(io, int, NULL, 0);

2
drivers/net/irda/pxaficp_ir.c
Просмотреть файл

@ -908,6 +908,7 @@ static int pxa_irda_remove(struct platform_device *_dev)
static struct platform_driver pxa_ir_driver = {
.driver = {
.name = "pxa2xx-ir",
.owner = THIS_MODULE,
},
.probe = pxa_irda_probe,
.remove = pxa_irda_remove,
@ -929,3 +930,4 @@ module_init(pxa_irda_init);
module_exit(pxa_irda_exit);
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:pxa2xx-ir");

2
drivers/net/irda/sa1100_ir.c
Просмотреть файл

@ -1008,6 +1008,7 @@ static struct platform_driver sa1100ir_driver = {
.resume = sa1100_irda_resume,
.driver = {
.name = "sa11x0-ir",
.owner = THIS_MODULE,
},
};
@ -1041,3 +1042,4 @@ MODULE_LICENSE("GPL");
MODULE_PARM_DESC(power_level, "IrDA power level, 1 (low) to 3 (high)");
MODULE_PARM_DESC(tx_lpm, "Enable transmitter low power (1.6us) mode");
MODULE_PARM_DESC(max_rate, "Maximum baud rate (4000000, 115200, 57600, 38400, 19200, 9600)");
MODULE_ALIAS("platform:sa11x0-ir");

2
drivers/net/ixgbe/ixgbe_main.c
Просмотреть файл

@ -3431,6 +3431,7 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
}
pci_set_master(pdev);
pci_save_state(pdev);
#ifdef CONFIG_NETDEVICES_MULTIQUEUE
netdev = alloc_etherdev_mq(sizeof(struct ixgbe_adapter), MAX_TX_QUEUES);
@ -3721,6 +3722,7 @@ static pci_ers_result_t ixgbe_io_slot_reset(struct pci_dev *pdev)
return PCI_ERS_RESULT_DISCONNECT;
}
pci_set_master(pdev);
pci_restore_state(pdev);
pci_enable_wake(pdev, PCI_D3hot, 0);
pci_enable_wake(pdev, PCI_D3cold, 0);

2
drivers/net/jazzsonic.c
Просмотреть файл

@ -249,6 +249,7 @@ out:
MODULE_DESCRIPTION("Jazz SONIC ethernet driver");
module_param(sonic_debug, int, 0);
MODULE_PARM_DESC(sonic_debug, "jazzsonic debug level (1-4)");
MODULE_ALIAS("platform:jazzsonic");
#include "sonic.c"
@ -271,6 +272,7 @@ static struct platform_driver jazz_sonic_driver = {
.remove = __devexit_p(jazz_sonic_device_remove),
.driver = {
.name = jazz_sonic_string,
.owner = THIS_MODULE,
},
};

39
drivers/net/korina.c
Просмотреть файл

@ -883,7 +883,7 @@ static int korina_init(struct net_device *dev)
static int korina_restart(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
int ret = 0;
int ret;
/*
* Disable interrupts
@ -987,7 +987,7 @@ static void korina_poll_controller(struct net_device *dev)
static int korina_open(struct net_device *dev)
{
struct korina_private *lp = netdev_priv(dev);
int ret = 0;
int ret;
/* Initialize */
ret = korina_init(dev);
@ -1031,6 +1031,8 @@ static int korina_open(struct net_device *dev)
dev->name, lp->und_irq);
goto err_free_ovr_irq;
}
out:
return ret;
err_free_ovr_irq:
free_irq(lp->ovr_irq, dev);
@ -1041,8 +1043,6 @@ err_free_rx_irq:
err_release:
korina_free_ring(dev);
goto out;
out:
return ret;
}
static int korina_close(struct net_device *dev)
@ -1082,7 +1082,7 @@ static int korina_probe(struct platform_device *pdev)
struct korina_private *lp;
struct net_device *dev;
struct resource *r;
int retval, err;
int rc;
dev = alloc_etherdev(sizeof(struct korina_private));
if (!dev) {
@ -1106,7 +1106,7 @@ static int korina_probe(struct platform_device *pdev)
lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->eth_regs) {
printk(KERN_ERR DRV_NAME "cannot remap registers\n");
retval = -ENXIO;
rc = -ENXIO;
goto probe_err_out;
}
@ -1114,7 +1114,7 @@ static int korina_probe(struct platform_device *pdev)
lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->rx_dma_regs) {
printk(KERN_ERR DRV_NAME "cannot remap Rx DMA registers\n");
retval = -ENXIO;
rc = -ENXIO;
goto probe_err_dma_rx;
}
@ -1122,14 +1122,14 @@ static int korina_probe(struct platform_device *pdev)
lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
if (!lp->tx_dma_regs) {
printk(KERN_ERR DRV_NAME "cannot remap Tx DMA registers\n");
retval = -ENXIO;
rc = -ENXIO;
goto probe_err_dma_tx;
}
lp->td_ring = kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
if (!lp->td_ring) {
printk(KERN_ERR DRV_NAME "cannot allocate descriptors\n");
retval = -ENOMEM;
rc = -ENXIO;
goto probe_err_td_ring;
}
@ -1166,14 +1166,14 @@ static int korina_probe(struct platform_device *pdev)
lp->mii_if.phy_id_mask = 0x1f;
lp->mii_if.reg_num_mask = 0x1f;
err = register_netdev(dev);
if (err) {
rc = register_netdev(dev);
if (rc < 0) {
printk(KERN_ERR DRV_NAME
": cannot register net device %d\n", err);
retval = -EINVAL;
": cannot register net device %d\n", rc);
goto probe_err_register;
}
return 0;
out:
return rc;
probe_err_register:
kfree(lp->td_ring);
@ -1185,7 +1185,7 @@ probe_err_dma_rx:
iounmap(lp->eth_regs);
probe_err_out:
free_netdev(dev);
return retval;
goto out;
}
static int korina_remove(struct platform_device *pdev)
@ -1193,12 +1193,9 @@ static int korina_remove(struct platform_device *pdev)
struct korina_device *bif = platform_get_drvdata(pdev);
struct korina_private *lp = netdev_priv(bif->dev);
if (lp->eth_regs)
iounmap(lp->eth_regs);
if (lp->rx_dma_regs)
iounmap(lp->rx_dma_regs);
if (lp->tx_dma_regs)
iounmap(lp->tx_dma_regs);
iounmap(lp->eth_regs);
iounmap(lp->rx_dma_regs);
iounmap(lp->tx_dma_regs);
platform_set_drvdata(pdev, NULL);
unregister_netdev(bif->dev);

2
drivers/net/macb.c
Просмотреть файл

@ -1281,6 +1281,7 @@ static struct platform_driver macb_driver = {
.remove = __exit_p(macb_remove),
.driver = {
.name = "macb",
.owner = THIS_MODULE,
},
};
@ -1300,3 +1301,4 @@ module_exit(macb_exit);
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("Atmel MACB Ethernet driver");
MODULE_AUTHOR("Haavard Skinnemoen <hskinnemoen@atmel.com>");
MODULE_ALIAS("platform:macb");

2
drivers/net/meth.c
Просмотреть файл

@ -830,6 +830,7 @@ static struct platform_driver meth_driver = {
.remove = __devexit_p(meth_remove),
.driver = {
.name = "meth",
.owner = THIS_MODULE,
}
};
@ -855,3 +856,4 @@ module_exit(meth_exit_module);
MODULE_AUTHOR("Ilya Volynets <ilya@theIlya.com>");
MODULE_DESCRIPTION("SGI O2 Builtin Fast Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:meth");

5
drivers/net/mv643xx_eth.c
Просмотреть файл

@ -2030,6 +2030,7 @@ static struct platform_driver mv643xx_eth_driver = {
.shutdown = mv643xx_eth_shutdown,
.driver = {
.name = MV643XX_ETH_NAME,
.owner = THIS_MODULE,
},
};
@ -2038,6 +2039,7 @@ static struct platform_driver mv643xx_eth_shared_driver = {
.remove = mv643xx_eth_shared_remove,
.driver = {
.name = MV643XX_ETH_SHARED_NAME,
.owner = THIS_MODULE,
},
};
@ -2085,7 +2087,8 @@ MODULE_LICENSE("GPL");
MODULE_AUTHOR( "Rabeeh Khoury, Assaf Hoffman, Matthew Dharm, Manish Lachwani"
" and Dale Farnsworth");
MODULE_DESCRIPTION("Ethernet driver for Marvell MV643XX");
MODULE_ALIAS("platform:mv643xx_eth");
MODULE_ALIAS("platform:" MV643XX_ETH_NAME);
MODULE_ALIAS("platform:" MV643XX_ETH_SHARED_NAME);
/*
* The second part is the low level driver of the gigE ethernet ports.

2
drivers/net/netx-eth.c
Просмотреть файл

@ -502,4 +502,4 @@ module_exit(netx_eth_cleanup);
MODULE_AUTHOR("Sascha Hauer, Pengutronix");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:" CARDNAME);

15
drivers/net/netxen/netxen_nic_hw.c
Просмотреть файл

@ -1132,8 +1132,8 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
u32 fw_minor = 0;
u32 fw_build = 0;
char brd_name[NETXEN_MAX_SHORT_NAME];
struct netxen_new_user_info user_info;
int i, addr = NETXEN_USER_START;
char serial_num[32];
int i, addr;
__le32 *ptr32;
struct netxen_board_info *board_info = &(adapter->ahw.boardcfg);
@ -1150,10 +1150,10 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
valid = 0;
}
if (valid) {
ptr32 = (u32 *) & user_info;
for (i = 0;
i < sizeof(struct netxen_new_user_info) / sizeof(u32);
i++) {
ptr32 = (u32 *)&serial_num;
addr = NETXEN_USER_START +
offsetof(struct netxen_new_user_info, serial_num);
for (i = 0; i < 8; i++) {
if (netxen_rom_fast_read(adapter, addr, ptr32) == -1) {
printk("%s: ERROR reading %s board userarea.\n",
netxen_nic_driver_name,
@ -1163,10 +1163,11 @@ void netxen_nic_flash_print(struct netxen_adapter *adapter)
ptr32++;
addr += sizeof(u32);
}
get_brd_name_by_type(board_info->board_type, brd_name);
printk("NetXen %s Board S/N %s Chip id 0x%x\n",
brd_name, user_info.serial_num, board_info->chip_id);
brd_name, serial_num, board_info->chip_id);
printk("NetXen %s Board #%d, Chip id 0x%x\n",
board_info->board_type == 0x0b ? "XGB" : "GBE",

369
drivers/net/niu.c
Просмотреть файл

@ -33,8 +33,8 @@
#define DRV_MODULE_NAME "niu"
#define PFX DRV_MODULE_NAME ": "
#define DRV_MODULE_VERSION "0.7"
#define DRV_MODULE_RELDATE "February 18, 2008"
#define DRV_MODULE_VERSION "0.8"
#define DRV_MODULE_RELDATE "April 24, 2008"
static char version[] __devinitdata =
DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
@ -673,11 +673,16 @@ static int serdes_init_10g(struct niu *np)
}
if ((sig & mask) != val) {
if (np->flags & NIU_FLAGS_HOTPLUG_PHY) {
np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
return 0;
}
dev_err(np->device, PFX "Port %u signal bits [%08x] are not "
"[%08x]\n", np->port, (int) (sig & mask), (int) val);
return -ENODEV;
}
if (np->flags & NIU_FLAGS_HOTPLUG_PHY)
np->flags |= NIU_FLAGS_HOTPLUG_PHY_PRESENT;
return 0;
}
@ -998,6 +1003,28 @@ static int bcm8704_user_dev3_readback(struct niu *np, int reg)
return 0;
}
static int bcm8706_init_user_dev3(struct niu *np)
{
int err;
err = mdio_read(np, np->phy_addr, BCM8704_USER_DEV3_ADDR,
BCM8704_USER_OPT_DIGITAL_CTRL);
if (err < 0)
return err;
err &= ~USER_ODIG_CTRL_GPIOS;
err |= (0x3 << USER_ODIG_CTRL_GPIOS_SHIFT);
err |= USER_ODIG_CTRL_RESV2;
err = mdio_write(np, np->phy_addr, BCM8704_USER_DEV3_ADDR,
BCM8704_USER_OPT_DIGITAL_CTRL, err);
if (err)
return err;
mdelay(1000);
return 0;
}
static int bcm8704_init_user_dev3(struct niu *np)
{
int err;
@ -1127,33 +1154,11 @@ static int xcvr_init_10g_mrvl88x2011(struct niu *np)
MRVL88X2011_10G_PMD_TX_DIS, MRVL88X2011_ENA_PMDTX);
}
static int xcvr_init_10g_bcm8704(struct niu *np)
static int xcvr_diag_bcm870x(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
u16 analog_stat0, tx_alarm_status;
int err;
err = bcm8704_reset(np);
if (err)
return err;
err = bcm8704_init_user_dev3(np);
if (err)
return err;
err = mdio_read(np, np->phy_addr, BCM8704_PCS_DEV_ADDR,
MII_BMCR);
if (err < 0)
return err;
err &= ~BMCR_LOOPBACK;
if (lp->loopback_mode == LOOPBACK_MAC)
err |= BMCR_LOOPBACK;
err = mdio_write(np, np->phy_addr, BCM8704_PCS_DEV_ADDR,
MII_BMCR, err);
if (err)
return err;
int err = 0;
#if 1
err = mdio_read(np, np->phy_addr, BCM8704_PMA_PMD_DEV_ADDR,
@ -1211,6 +1216,89 @@ static int xcvr_init_10g_bcm8704(struct niu *np)
return 0;
}
static int xcvr_10g_set_lb_bcm870x(struct niu *np)
{
struct niu_link_config *lp = &np->link_config;
int err;
err = mdio_read(np, np->phy_addr, BCM8704_PCS_DEV_ADDR,
MII_BMCR);
if (err < 0)
return err;
err &= ~BMCR_LOOPBACK;
if (lp->loopback_mode == LOOPBACK_MAC)
err |= BMCR_LOOPBACK;
err = mdio_write(np, np->phy_addr, BCM8704_PCS_DEV_ADDR,
MII_BMCR, err);
if (err)
return err;
return 0;
}
static int xcvr_init_10g_bcm8706(struct niu *np)
{
int err = 0;
u64 val;
if ((np->flags & NIU_FLAGS_HOTPLUG_PHY) &&
(np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT) == 0)
return err;
val = nr64_mac(XMAC_CONFIG);
val &= ~XMAC_CONFIG_LED_POLARITY;
val |= XMAC_CONFIG_FORCE_LED_ON;
nw64_mac(XMAC_CONFIG, val);
val = nr64(MIF_CONFIG);
val |= MIF_CONFIG_INDIRECT_MODE;
nw64(MIF_CONFIG, val);
err = bcm8704_reset(np);
if (err)
return err;
err = xcvr_10g_set_lb_bcm870x(np);
if (err)
return err;
err = bcm8706_init_user_dev3(np);
if (err)
return err;
err = xcvr_diag_bcm870x(np);
if (err)
return err;
return 0;
}
static int xcvr_init_10g_bcm8704(struct niu *np)
{
int err;
err = bcm8704_reset(np);
if (err)
return err;
err = bcm8704_init_user_dev3(np);
if (err)
return err;
err = xcvr_10g_set_lb_bcm870x(np);
if (err)
return err;
err = xcvr_diag_bcm870x(np);
if (err)
return err;
return 0;
}
static int xcvr_init_10g(struct niu *np)
{
int phy_id, err;
@ -1548,6 +1636,59 @@ out:
return err;
}
static int link_status_10g_bcm8706(struct niu *np, int *link_up_p)
{
int err, link_up;
link_up = 0;
err = mdio_read(np, np->phy_addr, BCM8704_PMA_PMD_DEV_ADDR,
BCM8704_PMD_RCV_SIGDET);
if (err < 0)
goto out;
if (!(err & PMD_RCV_SIGDET_GLOBAL)) {
err = 0;
goto out;
}
err = mdio_read(np, np->phy_addr, BCM8704_PCS_DEV_ADDR,
BCM8704_PCS_10G_R_STATUS);
if (err < 0)
goto out;
if (!(err & PCS_10G_R_STATUS_BLK_LOCK)) {
err = 0;
goto out;
}
err = mdio_read(np, np->phy_addr, BCM8704_PHYXS_DEV_ADDR,
BCM8704_PHYXS_XGXS_LANE_STAT);
if (err < 0)
goto out;
if (err != (PHYXS_XGXS_LANE_STAT_ALINGED |
PHYXS_XGXS_LANE_STAT_MAGIC |
PHYXS_XGXS_LANE_STAT_PATTEST |
PHYXS_XGXS_LANE_STAT_LANE3 |
PHYXS_XGXS_LANE_STAT_LANE2 |
PHYXS_XGXS_LANE_STAT_LANE1 |
PHYXS_XGXS_LANE_STAT_LANE0)) {
err = 0;
np->link_config.active_speed = SPEED_INVALID;
np->link_config.active_duplex = DUPLEX_INVALID;
goto out;
}
link_up = 1;
np->link_config.active_speed = SPEED_10000;
np->link_config.active_duplex = DUPLEX_FULL;
err = 0;
out:
*link_up_p = link_up;
if (np->flags & NIU_FLAGS_HOTPLUG_PHY)
err = 0;
return err;
}
static int link_status_10g_bcom(struct niu *np, int *link_up_p)
{
int err, link_up;
@ -1627,6 +1768,82 @@ static int link_status_10g(struct niu *np, int *link_up_p)
return err;
}
static int niu_10g_phy_present(struct niu *np)
{
u64 sig, mask, val;
sig = nr64(ESR_INT_SIGNALS);
switch (np->port) {
case 0:
mask = ESR_INT_SIGNALS_P0_BITS;
val = (ESR_INT_SRDY0_P0 |
ESR_INT_DET0_P0 |
ESR_INT_XSRDY_P0 |
ESR_INT_XDP_P0_CH3 |
ESR_INT_XDP_P0_CH2 |
ESR_INT_XDP_P0_CH1 |
ESR_INT_XDP_P0_CH0);
break;
case 1:
mask = ESR_INT_SIGNALS_P1_BITS;
val = (ESR_INT_SRDY0_P1 |
ESR_INT_DET0_P1 |
ESR_INT_XSRDY_P1 |
ESR_INT_XDP_P1_CH3 |
ESR_INT_XDP_P1_CH2 |
ESR_INT_XDP_P1_CH1 |
ESR_INT_XDP_P1_CH0);
break;
default:
return 0;
}
if ((sig & mask) != val)
return 0;
return 1;
}
static int link_status_10g_hotplug(struct niu *np, int *link_up_p)
{
unsigned long flags;
int err = 0;
int phy_present;
int phy_present_prev;
spin_lock_irqsave(&np->lock, flags);
if (np->link_config.loopback_mode == LOOPBACK_DISABLED) {
phy_present_prev = (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT) ?
1 : 0;
phy_present = niu_10g_phy_present(np);
if (phy_present != phy_present_prev) {
/* state change */
if (phy_present) {
np->flags |= NIU_FLAGS_HOTPLUG_PHY_PRESENT;
if (np->phy_ops->xcvr_init)
err = np->phy_ops->xcvr_init(np);
if (err) {
/* debounce */
np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
}
} else {
np->flags &= ~NIU_FLAGS_HOTPLUG_PHY_PRESENT;
*link_up_p = 0;
niuwarn(LINK, "%s: Hotplug PHY Removed\n",
np->dev->name);
}
}
if (np->flags & NIU_FLAGS_HOTPLUG_PHY_PRESENT)
err = link_status_10g_bcm8706(np, link_up_p);
}
spin_unlock_irqrestore(&np->lock, flags);
return err;
}
static int link_status_1g(struct niu *np, int *link_up_p)
{
struct niu_link_config *lp = &np->link_config;
@ -1761,6 +1978,12 @@ static const struct niu_phy_ops phy_ops_10g_fiber = {
.link_status = link_status_10g,
};
static const struct niu_phy_ops phy_ops_10g_fiber_hotplug = {
.serdes_init = serdes_init_10g,
.xcvr_init = xcvr_init_10g_bcm8706,
.link_status = link_status_10g_hotplug,
};
static const struct niu_phy_ops phy_ops_10g_copper = {
.serdes_init = serdes_init_10g,
.link_status = link_status_10g, /* XXX */
@ -1792,6 +2015,11 @@ static const struct niu_phy_template phy_template_10g_fiber = {
.phy_addr_base = 8,
};
static const struct niu_phy_template phy_template_10g_fiber_hotplug = {
.ops = &phy_ops_10g_fiber_hotplug,
.phy_addr_base = 8,
};
static const struct niu_phy_template phy_template_10g_copper = {
.ops = &phy_ops_10g_copper,
.phy_addr_base = 10,
@ -1996,6 +2224,13 @@ static int niu_determine_phy_disposition(struct niu *np)
plat_type == PLAT_TYPE_VF_P1)
phy_addr_off = 8;
phy_addr_off += np->port;
if (np->flags & NIU_FLAGS_HOTPLUG_PHY) {
tp = &phy_template_10g_fiber_hotplug;
if (np->port == 0)
phy_addr_off = 8;
if (np->port == 1)
phy_addr_off = 12;
}
break;
case NIU_FLAGS_10G | NIU_FLAGS_XCVR_SERDES:
@ -6773,6 +7008,37 @@ static int __devinit niu_phy_type_prop_decode(struct niu *np,
return 0;
}
/* niu board models have a trailing dash version incremented
* with HW rev change. Need to ingnore the dash version while
* checking for match
*
* for example, for the 10G card the current vpd.board_model
* is 501-5283-04, of which -04 is the dash version and have
* to be ignored
*/
static int niu_board_model_match(struct niu *np, const char *model)
{
return !strncmp(np->vpd.board_model, model, strlen(model));
}
static int niu_pci_vpd_get_nports(struct niu *np)
{
int ports = 0;
if ((niu_board_model_match(np, NIU_QGC_LP_BM_STR)) ||
(niu_board_model_match(np, NIU_QGC_PEM_BM_STR)) ||
(niu_board_model_match(np, NIU_ALONSO_BM_STR))) {
ports = 4;
} else if ((niu_board_model_match(np, NIU_2XGF_LP_BM_STR)) ||
(niu_board_model_match(np, NIU_2XGF_PEM_BM_STR)) ||
(niu_board_model_match(np, NIU_FOXXY_BM_STR)) ||
(niu_board_model_match(np, NIU_2XGF_MRVL_BM_STR))) {
ports = 2;
}
return ports;
}
static void __devinit niu_pci_vpd_validate(struct niu *np)
{
struct net_device *dev = np->dev;
@ -6799,6 +7065,9 @@ static void __devinit niu_pci_vpd_validate(struct niu *np)
}
if (np->flags & NIU_FLAGS_10G)
np->mac_xcvr = MAC_XCVR_XPCS;
} else if (niu_board_model_match(np, NIU_FOXXY_BM_STR)) {
np->flags |= (NIU_FLAGS_10G | NIU_FLAGS_FIBER |
NIU_FLAGS_HOTPLUG_PHY);
} else if (niu_phy_type_prop_decode(np, np->vpd.phy_type)) {
dev_err(np->device, PFX "Illegal phy string [%s].\n",
np->vpd.phy_type);
@ -6987,11 +7256,17 @@ static int __devinit niu_get_and_validate_port(struct niu *np)
if (parent->plat_type == PLAT_TYPE_NIU) {
parent->num_ports = 2;
} else {
parent->num_ports = nr64(ESPC_NUM_PORTS_MACS) &
ESPC_NUM_PORTS_MACS_VAL;
parent->num_ports = niu_pci_vpd_get_nports(np);
if (!parent->num_ports) {
/* Fall back to SPROM as last resort.
* This will fail on most cards.
*/
parent->num_ports = nr64(ESPC_NUM_PORTS_MACS) &
ESPC_NUM_PORTS_MACS_VAL;
if (!parent->num_ports)
parent->num_ports = 4;
if (!parent->num_ports)
return -ENODEV;
}
}
}
@ -7015,7 +7290,8 @@ static int __devinit phy_record(struct niu_parent *parent,
return 0;
if (type == PHY_TYPE_PMA_PMD || type == PHY_TYPE_PCS) {
if (((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM8704) &&
((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_MRVL88X2011))
((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_MRVL88X2011) &&
((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM8706))
return 0;
} else {
if ((id & NIU_PHY_ID_MASK) != NIU_PHY_ID_BCM5464R)
@ -7262,7 +7538,6 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
u32 val;
int err;
if (!strcmp(np->vpd.model, "SUNW,CP3220") ||
!strcmp(np->vpd.model, "SUNW,CP3260")) {
num_10g = 0;
@ -7273,6 +7548,12 @@ static int __devinit walk_phys(struct niu *np, struct niu_parent *parent)
phy_encode(PORT_TYPE_1G, 1) |
phy_encode(PORT_TYPE_1G, 2) |
phy_encode(PORT_TYPE_1G, 3));
} else if (niu_board_model_match(np, NIU_FOXXY_BM_STR)) {
num_10g = 2;
num_1g = 0;
parent->num_ports = 2;
val = (phy_encode(PORT_TYPE_10G, 0) |
phy_encode(PORT_TYPE_10G, 1));
} else {
err = fill_phy_probe_info(np, parent, info);
if (err)
@ -7733,15 +8014,16 @@ static int __devinit niu_get_invariants(struct niu *np)
have_props = !err;
err = niu_get_and_validate_port(np);
if (err)
return err;
err = niu_init_mac_ipp_pcs_base(np);
if (err)
return err;
if (!have_props) {
if (have_props) {
err = niu_get_and_validate_port(np);
if (err)
return err;
} else {
if (np->parent->plat_type == PLAT_TYPE_NIU)
return -EINVAL;
@ -7753,10 +8035,17 @@ static int __devinit niu_get_invariants(struct niu *np)
niu_pci_vpd_fetch(np, offset);
nw64(ESPC_PIO_EN, 0);
if (np->flags & NIU_FLAGS_VPD_VALID)
if (np->flags & NIU_FLAGS_VPD_VALID) {
niu_pci_vpd_validate(np);
err = niu_get_and_validate_port(np);
if (err)
return err;
}
if (!(np->flags & NIU_FLAGS_VPD_VALID)) {
err = niu_get_and_validate_port(np);
if (err)
return err;
err = niu_pci_probe_sprom(np);
if (err)
return err;

12
drivers/net/niu.h
Просмотреть файл

@ -2537,6 +2537,7 @@ struct fcram_hash_ipv6 {
#define NIU_PHY_ID_MASK 0xfffff0f0
#define NIU_PHY_ID_BCM8704 0x00206030
#define NIU_PHY_ID_BCM8706 0x00206035
#define NIU_PHY_ID_BCM5464R 0x002060b0
#define NIU_PHY_ID_MRVL88X2011 0x01410020
@ -2937,6 +2938,15 @@ struct rx_ring_info {
#define NIU_MAX_MTU 9216
/* VPD strings */
#define NIU_QGC_LP_BM_STR "501-7606"
#define NIU_2XGF_LP_BM_STR "501-7283"
#define NIU_QGC_PEM_BM_STR "501-7765"
#define NIU_2XGF_PEM_BM_STR "501-7626"
#define NIU_ALONSO_BM_STR "373-0202"
#define NIU_FOXXY_BM_STR "501-7961"
#define NIU_2XGF_MRVL_BM_STR "SK-6E82"
#define NIU_VPD_MIN_MAJOR 3
#define NIU_VPD_MIN_MINOR 4
@ -3199,6 +3209,8 @@ struct niu {
struct niu_parent *parent;
u32 flags;
#define NIU_FLAGS_HOTPLUG_PHY_PRESENT 0x02000000 /* Removebale PHY detected*/
#define NIU_FLAGS_HOTPLUG_PHY 0x01000000 /* Removebale PHY */
#define NIU_FLAGS_VPD_VALID 0x00800000 /* VPD has valid version */
#define NIU_FLAGS_MSIX 0x00400000 /* MSI-X in use */
#define NIU_FLAGS_MCAST 0x00200000 /* multicast filter enabled */

3
drivers/net/phy/mdio_bus.c
Просмотреть файл

@ -89,6 +89,9 @@ int mdiobus_register(struct mii_bus *bus)
phydev->bus = bus;
/* Run all of the fixups for this PHY */
phy_scan_fixups(phydev);
err = device_register(&phydev->dev);
if (err) {

4
drivers/net/phy/phy.c
Просмотреть файл

@ -406,8 +406,10 @@ int phy_mii_ioctl(struct phy_device *phydev,
if (mii_data->reg_num == MII_BMCR
&& val & BMCR_RESET
&& phydev->drv->config_init)
&& phydev->drv->config_init) {
phy_scan_fixups(phydev);
phydev->drv->config_init(phydev);
}
break;
default:

129
drivers/net/phy/phy_device.c
Просмотреть файл

@ -53,6 +53,96 @@ static void phy_device_release(struct device *dev)
phy_device_free(to_phy_device(dev));
}
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
/*
* Creates a new phy_fixup and adds it to the list
* @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
* @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
* It can also be PHY_ANY_UID
* @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
* comparison
* @run: The actual code to be run when a matching PHY is found
*/
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *))
{
struct phy_fixup *fixup;
fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
if (!fixup)
return -ENOMEM;
strncpy(fixup->bus_id, bus_id, BUS_ID_SIZE);
fixup->phy_uid = phy_uid;
fixup->phy_uid_mask = phy_uid_mask;
fixup->run = run;
mutex_lock(&phy_fixup_lock);
list_add_tail(&fixup->list, &phy_fixup_list);
mutex_unlock(&phy_fixup_lock);
return 0;
}
EXPORT_SYMBOL(phy_register_fixup);
/* Registers a fixup to be run on any PHY with the UID in phy_uid */
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *))
{
return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_uid);
/* Registers a fixup to be run on the PHY with id string bus_id */
int phy_register_fixup_for_id(const char *bus_id,
int (*run)(struct phy_device *))
{
return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_id);
/*
* Returns 1 if fixup matches phydev in bus_id and phy_uid.
* Fixups can be set to match any in one or more fields.
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
{
if (strcmp(fixup->bus_id, phydev->dev.bus_id) != 0)
if (strcmp(fixup->bus_id, PHY_ANY_ID) != 0)
return 0;
if ((fixup->phy_uid & fixup->phy_uid_mask) !=
(phydev->phy_id & fixup->phy_uid_mask))
if (fixup->phy_uid != PHY_ANY_UID)
return 0;
return 1;
}
/* Runs any matching fixups for this phydev */
int phy_scan_fixups(struct phy_device *phydev)
{
struct phy_fixup *fixup;
mutex_lock(&phy_fixup_lock);
list_for_each_entry(fixup, &phy_fixup_list, list) {
if (phy_needs_fixup(phydev, fixup)) {
int err;
err = fixup->run(phydev);
if (err < 0)
return err;
}
}
mutex_unlock(&phy_fixup_lock);
return 0;
}
EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id)
{
struct phy_device *dev;
@ -179,13 +269,13 @@ void phy_prepare_link(struct phy_device *phydev,
* choose to call only the subset of functions which provide
* the desired functionality.
*/
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface)
{
struct phy_device *phydev;
phydev = phy_attach(dev, phy_id, flags, interface);
phydev = phy_attach(dev, bus_id, flags, interface);
if (IS_ERR(phydev))
return phydev;
@ -226,7 +316,7 @@ static int phy_compare_id(struct device *dev, void *data)
/**
* phy_attach - attach a network device to a particular PHY device
* @dev: network device to attach
* @phy_id: PHY device to attach
* @bus_id: PHY device to attach
* @flags: PHY device's dev_flags
* @interface: PHY device's interface
*
@ -238,7 +328,7 @@ static int phy_compare_id(struct device *dev, void *data)
* change. The phy_device is returned to the attaching driver.
*/
struct phy_device *phy_attach(struct net_device *dev,
const char *phy_id, u32 flags, phy_interface_t interface)
const char *bus_id, u32 flags, phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
@ -246,12 +336,12 @@ struct phy_device *phy_attach(struct net_device *dev,
/* Search the list of PHY devices on the mdio bus for the
* PHY with the requested name */
d = bus_find_device(bus, NULL, (void *)phy_id, phy_compare_id);
d = bus_find_device(bus, NULL, (void *)bus_id, phy_compare_id);
if (d) {
phydev = to_phy_device(d);
} else {
printk(KERN_ERR "%s not found\n", phy_id);
printk(KERN_ERR "%s not found\n", bus_id);
return ERR_PTR(-ENODEV);
}
@ -271,7 +361,7 @@ struct phy_device *phy_attach(struct net_device *dev,
if (phydev->attached_dev) {
printk(KERN_ERR "%s: %s already attached\n",
dev->name, phy_id);
dev->name, bus_id);
return ERR_PTR(-EBUSY);
}
@ -287,6 +377,11 @@ struct phy_device *phy_attach(struct net_device *dev,
if (phydev->drv->config_init) {
int err;
err = phy_scan_fixups(phydev);
if (err < 0)
return ERR_PTR(err);
err = phydev->drv->config_init(phydev);
if (err < 0)
@ -395,6 +490,7 @@ EXPORT_SYMBOL(genphy_config_advert);
*/
int genphy_setup_forced(struct phy_device *phydev)
{
int err;
int ctl = 0;
phydev->pause = phydev->asym_pause = 0;
@ -407,17 +503,26 @@ int genphy_setup_forced(struct phy_device *phydev)
if (DUPLEX_FULL == phydev->duplex)
ctl |= BMCR_FULLDPLX;
ctl = phy_write(phydev, MII_BMCR, ctl);
err = phy_write(phydev, MII_BMCR, ctl);
if (ctl < 0)
return ctl;
if (err < 0)
return err;
/*
* Run the fixups on this PHY, just in case the
* board code needs to change something after a reset
*/
err = phy_scan_fixups(phydev);
if (err < 0)
return err;
/* We just reset the device, so we'd better configure any
* settings the PHY requires to operate */
if (phydev->drv->config_init)
ctl = phydev->drv->config_init(phydev);
err = phydev->drv->config_init(phydev);
return ctl;
return err;
}

128
drivers/net/s2io.c
Просмотреть файл

@ -86,7 +86,7 @@
#include "s2io.h"
#include "s2io-regs.h"
#define DRV_VERSION "2.0.26.20"
#define DRV_VERSION "2.0.26.22"
/* S2io Driver name & version. */
static char s2io_driver_name[] = "Neterion";
@ -117,20 +117,6 @@ static inline int RXD_IS_UP2DT(struct RxD_t *rxdp)
#define LINK_IS_UP(val64) (!(val64 & (ADAPTER_STATUS_RMAC_REMOTE_FAULT | \
ADAPTER_STATUS_RMAC_LOCAL_FAULT)))
#define TASKLET_IN_USE test_and_set_bit(0, (&sp->tasklet_status))
#define PANIC 1
#define LOW 2
static inline int rx_buffer_level(struct s2io_nic * sp, int rxb_size, int ring)
{
struct mac_info *mac_control;
mac_control = &sp->mac_control;
if (rxb_size <= rxd_count[sp->rxd_mode])
return PANIC;
else if ((mac_control->rings[ring].pkt_cnt - rxb_size) > 16)
return LOW;
return 0;
}
static inline int is_s2io_card_up(const struct s2io_nic * sp)
{
@ -2458,7 +2444,7 @@ static void free_tx_buffers(struct s2io_nic *nic)
for (i = 0; i < config->tx_fifo_num; i++) {
unsigned long flags;
spin_lock_irqsave(&mac_control->fifos[i].tx_lock, flags);
for (j = 0; j < config->tx_cfg[i].fifo_len - 1; j++) {
for (j = 0; j < config->tx_cfg[i].fifo_len; j++) {
txdp = (struct TxD *) \
mac_control->fifos[i].list_info[j].list_virt_addr;
skb = s2io_txdl_getskb(&mac_control->fifos[i], txdp, j);
@ -2544,7 +2530,6 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
struct config_param *config;
u64 tmp;
struct buffAdd *ba;
unsigned long flags;
struct RxD_t *first_rxdp = NULL;
u64 Buffer0_ptr = 0, Buffer1_ptr = 0;
struct RxD1 *rxdp1;
@ -2592,15 +2577,7 @@ static int fill_rx_buffers(struct s2io_nic *nic, int ring_no)
DBG_PRINT(INTR_DBG, "%s: Next block at: %p\n",
dev->name, rxdp);
}
if(!napi) {
spin_lock_irqsave(&nic->put_lock, flags);
mac_control->rings[ring_no].put_pos =
(block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
spin_unlock_irqrestore(&nic->put_lock, flags);
} else {
mac_control->rings[ring_no].put_pos =
(block_no * (rxd_count[nic->rxd_mode] + 1)) + off;
}
if ((rxdp->Control_1 & RXD_OWN_XENA) &&
((nic->rxd_mode == RXD_MODE_3B) &&
(rxdp->Control_2 & s2BIT(0)))) {
@ -2978,7 +2955,7 @@ static void rx_intr_handler(struct ring_info *ring_data)
{
struct s2io_nic *nic = ring_data->nic;
struct net_device *dev = (struct net_device *) nic->dev;
int get_block, put_block, put_offset;
int get_block, put_block;
struct rx_curr_get_info get_info, put_info;
struct RxD_t *rxdp;
struct sk_buff *skb;
@ -2987,19 +2964,11 @@ static void rx_intr_handler(struct ring_info *ring_data)
struct RxD1* rxdp1;
struct RxD3* rxdp3;
spin_lock(&nic->rx_lock);
get_info = ring_data->rx_curr_get_info;
get_block = get_info.block_index;
memcpy(&put_info, &ring_data->rx_curr_put_info, sizeof(put_info));
put_block = put_info.block_index;
rxdp = ring_data->rx_blocks[get_block].rxds[get_info.offset].virt_addr;
if (!napi) {
spin_lock(&nic->put_lock);
put_offset = ring_data->put_pos;
spin_unlock(&nic->put_lock);
} else
put_offset = ring_data->put_pos;
while (RXD_IS_UP2DT(rxdp)) {
/*
@ -3016,7 +2985,6 @@ static void rx_intr_handler(struct ring_info *ring_data)
DBG_PRINT(ERR_DBG, "%s: The skb is ",
dev->name);
DBG_PRINT(ERR_DBG, "Null in Rx Intr\n");
spin_unlock(&nic->rx_lock);
return;
}
if (nic->rxd_mode == RXD_MODE_1) {
@ -3072,8 +3040,6 @@ static void rx_intr_handler(struct ring_info *ring_data)
}
}
}
spin_unlock(&nic->rx_lock);
}
/**
@ -4105,7 +4071,6 @@ static int s2io_close(struct net_device *dev)
do_s2io_delete_unicast_mc(sp, tmp64);
}
/* Reset card, kill tasklet and free Tx and Rx buffers. */
s2io_card_down(sp);
return 0;
@ -4370,29 +4335,9 @@ s2io_alarm_handle(unsigned long data)
static int s2io_chk_rx_buffers(struct s2io_nic *sp, int rng_n)
{
int rxb_size, level;
if (!sp->lro) {
rxb_size = atomic_read(&sp->rx_bufs_left[rng_n]);
level = rx_buffer_level(sp, rxb_size, rng_n);
if ((level == PANIC) && (!TASKLET_IN_USE)) {
int ret;
DBG_PRINT(INTR_DBG, "%s: Rx BD hit ", __FUNCTION__);
DBG_PRINT(INTR_DBG, "PANIC levels\n");
if ((ret = fill_rx_buffers(sp, rng_n)) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "Out of memory in %s",
__FUNCTION__);
clear_bit(0, (&sp->tasklet_status));
return -1;
}
clear_bit(0, (&sp->tasklet_status));
} else if (level == LOW)
tasklet_schedule(&sp->task);
} else if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
if (fill_rx_buffers(sp, rng_n) == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s:Out of memory", sp->dev->name);
DBG_PRINT(INFO_DBG, " in Rx Intr!!\n");
}
return 0;
}
@ -6769,49 +6714,6 @@ static int s2io_change_mtu(struct net_device *dev, int new_mtu)
return ret;
}
/**
* s2io_tasklet - Bottom half of the ISR.
* @dev_adr : address of the device structure in dma_addr_t format.
* Description:
* This is the tasklet or the bottom half of the ISR. This is
* an extension of the ISR which is scheduled by the scheduler to be run
* when the load on the CPU is low. All low priority tasks of the ISR can
* be pushed into the tasklet. For now the tasklet is used only to
* replenish the Rx buffers in the Rx buffer descriptors.
* Return value:
* void.
*/
static void s2io_tasklet(unsigned long dev_addr)
{
struct net_device *dev = (struct net_device *) dev_addr;
struct s2io_nic *sp = dev->priv;
int i, ret;
struct mac_info *mac_control;
struct config_param *config;
mac_control = &sp->mac_control;
config = &sp->config;
if (!TASKLET_IN_USE) {
for (i = 0; i < config->rx_ring_num; i++) {
ret = fill_rx_buffers(sp, i);
if (ret == -ENOMEM) {
DBG_PRINT(INFO_DBG, "%s: Out of ",
dev->name);
DBG_PRINT(INFO_DBG, "memory in tasklet\n");
break;
} else if (ret == -EFILL) {
DBG_PRINT(INFO_DBG,
"%s: Rx Ring %d is full\n",
dev->name, i);
break;
}
}
clear_bit(0, (&sp->tasklet_status));
}
}
/**
* s2io_set_link - Set the LInk status
* @data: long pointer to device private structue
@ -7161,7 +7063,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
{
int cnt = 0;
struct XENA_dev_config __iomem *bar0 = sp->bar0;
unsigned long flags;
register u64 val64 = 0;
struct config_param *config;
config = &sp->config;
@ -7186,9 +7087,6 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
s2io_rem_isr(sp);
/* Kill tasklet. */
tasklet_kill(&sp->task);
/* Check if the device is Quiescent and then Reset the NIC */
while(do_io) {
/* As per the HW requirement we need to replenish the
@ -7223,9 +7121,7 @@ static void do_s2io_card_down(struct s2io_nic * sp, int do_io)
free_tx_buffers(sp);
/* Free all Rx buffers */
spin_lock_irqsave(&sp->rx_lock, flags);
free_rx_buffers(sp);
spin_unlock_irqrestore(&sp->rx_lock, flags);
clear_bit(__S2IO_STATE_LINK_TASK, &(sp->state));
}
@ -7314,9 +7210,6 @@ static int s2io_card_up(struct s2io_nic * sp)
S2IO_TIMER_CONF(sp->alarm_timer, s2io_alarm_handle, sp, (HZ/2));
/* Enable tasklet for the device */
tasklet_init(&sp->task, s2io_tasklet, (unsigned long) dev);
/* Enable select interrupts */
en_dis_err_alarms(sp, ENA_ALL_INTRS, ENABLE_INTRS);
if (sp->config.intr_type != INTA)
@ -8119,20 +8012,15 @@ s2io_init_nic(struct pci_dev *pdev, const struct pci_device_id *pre)
s2io_reset(sp);
/*
* Initialize the tasklet status and link state flags
* Initialize link state flags
* and the card state parameter
*/
sp->tasklet_status = 0;
sp->state = 0;
/* Initialize spinlocks */
for (i = 0; i < sp->config.tx_fifo_num; i++)
spin_lock_init(&mac_control->fifos[i].tx_lock);
if (!napi)
spin_lock_init(&sp->put_lock);
spin_lock_init(&sp->rx_lock);
/*
* SXE-002: Configure link and activity LED to init state
* on driver load.

9
drivers/net/s2io.h
Просмотреть файл

@ -703,9 +703,6 @@ struct ring_info {
*/
struct rx_curr_get_info rx_curr_get_info;
/* Index to the absolute position of the put pointer of Rx ring */
int put_pos;
/* Buffer Address store. */
struct buffAdd **ba;
struct s2io_nic *nic;
@ -868,8 +865,6 @@ struct s2io_nic {
int device_enabled_once;
char name[60];
struct tasklet_struct task;
volatile unsigned long tasklet_status;
/* Timer that handles I/O errors/exceptions */
struct timer_list alarm_timer;
@ -879,8 +874,6 @@ struct s2io_nic {
atomic_t rx_bufs_left[MAX_RX_RINGS];
spinlock_t put_lock;
#define PROMISC 1
#define ALL_MULTI 2
@ -964,7 +957,6 @@ struct s2io_nic {
u8 lro;
u16 lro_max_aggr_per_sess;
volatile unsigned long state;
spinlock_t rx_lock;
u64 general_int_mask;
#define VPD_STRING_LEN 80
u8 product_name[VPD_STRING_LEN];
@ -1094,7 +1086,6 @@ static void s2io_handle_errors(void * dev_id);
static int s2io_starter(void);
static void s2io_closer(void);
static void s2io_tx_watchdog(struct net_device *dev);
static void s2io_tasklet(unsigned long dev_addr);
static void s2io_set_multicast(struct net_device *dev);
static int rx_osm_handler(struct ring_info *ring_data, struct RxD_t * rxdp);
static void s2io_link(struct s2io_nic * sp, int link);

4
drivers/net/sgiseeq.c
Просмотреть файл

@ -825,7 +825,8 @@ static struct platform_driver sgiseeq_driver = {
.probe = sgiseeq_probe,
.remove = __devexit_p(sgiseeq_remove),
.driver = {
.name = "sgiseeq"
.name = "sgiseeq",
.owner = THIS_MODULE,
}
};
@ -850,3 +851,4 @@ module_exit(sgiseeq_module_exit);
MODULE_DESCRIPTION("SGI Seeq 8003 driver");
MODULE_AUTHOR("Linux/MIPS Mailing List <linux-mips@linux-mips.org>");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:sgiseeq");

8
drivers/net/smc911x.c
Просмотреть файл

@ -92,6 +92,7 @@ module_param(tx_fifo_kb, int, 0400);
MODULE_PARM_DESC(tx_fifo_kb,"transmit FIFO size in KB (1<x<15)(default=8)");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:smc911x");
/*
* The internal workings of the driver. If you are changing anything
@ -243,7 +244,7 @@ static void smc911x_reset(struct net_device *dev)
do {
udelay(10);
reg = SMC_GET_PMT_CTRL() & PMT_CTRL_READY_;
} while ( timeout-- && !reg);
} while (--timeout && !reg);
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for PM restore\n", dev->name);
return;
@ -267,7 +268,7 @@ static void smc911x_reset(struct net_device *dev)
resets++;
break;
}
} while ( timeout-- && (reg & HW_CFG_SRST_));
} while (--timeout && (reg & HW_CFG_SRST_));
}
if (timeout == 0) {
PRINTK("%s: smc911x_reset timeout waiting for reset\n", dev->name);
@ -413,7 +414,7 @@ static inline void smc911x_drop_pkt(struct net_device *dev)
do {
udelay(10);
reg = SMC_GET_RX_DP_CTRL() & RX_DP_CTRL_FFWD_BUSY_;
} while ( timeout-- && reg);
} while (--timeout && reg);
if (timeout == 0) {
PRINTK("%s: timeout waiting for RX fast forward\n", dev->name);
}
@ -2262,6 +2263,7 @@ static struct platform_driver smc911x_driver = {
.resume = smc911x_drv_resume,
.driver = {
.name = CARDNAME,
.owner = THIS_MODULE,
},
};

2
drivers/net/smc91x.c
Просмотреть файл

@ -132,6 +132,7 @@ module_param(watchdog, int, 0400);
MODULE_PARM_DESC(watchdog, "transmit timeout in milliseconds");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:smc91x");
/*
* The internal workings of the driver. If you are changing anything
@ -2308,6 +2309,7 @@ static struct platform_driver smc_driver = {
.resume = smc_drv_resume,
.driver = {
.name = CARDNAME,
.owner = THIS_MODULE,
},
};

2
drivers/net/sni_82596.c
Просмотреть файл

@ -44,6 +44,7 @@ static const char sni_82596_string[] = "snirm_82596";
MODULE_AUTHOR("Thomas Bogendoerfer");
MODULE_DESCRIPTION("i82596 driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:snirm_82596");
module_param(i596_debug, int, 0);
MODULE_PARM_DESC(i596_debug, "82596 debug mask");
@ -166,6 +167,7 @@ static struct platform_driver sni_82596_driver = {
.remove = __devexit_p(sni_82596_driver_remove),
.driver = {
.name = sni_82596_string,
.owner = THIS_MODULE,
},
};

15
drivers/net/tehuti.c
Просмотреть файл

@ -625,6 +625,12 @@ static void __init bdx_firmware_endianess(void)
s_firmLoad[i] = CPU_CHIP_SWAP32(s_firmLoad[i]);
}
static int bdx_range_check(struct bdx_priv *priv, u32 offset)
{
return (offset > (u32) (BDX_REGS_SIZE / priv->nic->port_num)) ?
-EINVAL : 0;
}
static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
{
struct bdx_priv *priv = ndev->priv;
@ -643,9 +649,15 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
DBG("%d 0x%x 0x%x\n", data[0], data[1], data[2]);
}
if (!capable(CAP_NET_ADMIN))
return -EPERM;
switch (data[0]) {
case BDX_OP_READ:
error = bdx_range_check(priv, data[1]);
if (error < 0)
return error;
data[2] = READ_REG(priv, data[1]);
DBG("read_reg(0x%x)=0x%x (dec %d)\n", data[1], data[2],
data[2]);
@ -655,6 +667,9 @@ static int bdx_ioctl_priv(struct net_device *ndev, struct ifreq *ifr, int cmd)
break;
case BDX_OP_WRITE:
error = bdx_range_check(priv, data[1]);
if (error < 0)
return error;
WRITE_REG(priv, data[1], data[2]);
DBG("write_reg(0x%x, 0x%x)\n", data[1], data[2]);
break;

2
drivers/net/tg3.c
Просмотреть файл

@ -4017,6 +4017,8 @@ static int tg3_halt(struct tg3 *, int, int);
* Invoked with tp->lock held.
*/
static int tg3_restart_hw(struct tg3 *tp, int reset_phy)
__releases(tp->lock)
__acquires(tp->lock)
{
int err;

2
drivers/net/tsi108_eth.c
Просмотреть файл

@ -162,6 +162,7 @@ static struct platform_driver tsi_eth_driver = {
.remove = tsi108_ether_remove,
.driver = {
.name = "tsi-ethernet",
.owner = THIS_MODULE,
},
};
@ -1729,3 +1730,4 @@ module_exit(tsi108_ether_exit);
MODULE_AUTHOR("Tundra Semiconductor Corporation");
MODULE_DESCRIPTION("Tsi108 Gigabit Ethernet driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:tsi-ethernet");

1
drivers/net/typhoon.c
Просмотреть файл

@ -2183,7 +2183,6 @@ typhoon_resume(struct pci_dev *pdev)
}
netif_device_attach(dev);
netif_start_queue(dev);
return 0;
reset:

2
drivers/net/ucc_geth.c
Просмотреть файл

@ -3932,7 +3932,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
fixed_link = of_get_property(np, "fixed-link", NULL);
if (fixed_link) {
ug_info->mdio_bus = 0;
snprintf(ug_info->mdio_bus, MII_BUS_ID_SIZE, "0");
ug_info->phy_address = fixed_link[0];
phy = NULL;
} else {

46
drivers/net/via-velocity.c
Просмотреть файл

@ -605,7 +605,6 @@ static void __devinit velocity_get_options(struct velocity_opt *opts, int index,
static void velocity_init_cam_filter(struct velocity_info *vptr)
{
struct mac_regs __iomem * regs = vptr->mac_regs;
unsigned short vid;
/* Turn on MCFG_PQEN, turn off MCFG_RTGOPT */
WORD_REG_BITS_SET(MCFG_PQEN, MCFG_RTGOPT, &regs->MCFG);
@ -617,29 +616,33 @@ static void velocity_init_cam_filter(struct velocity_info *vptr)
mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
mac_set_cam_mask(regs, vptr->mCAMmask);
/* Enable first VCAM */
/* Enable VCAMs */
if (vptr->vlgrp) {
for (vid = 0; vid < VLAN_VID_MASK; vid++) {
if (vlan_group_get_device(vptr->vlgrp, vid)) {
/* If Tagging option is enabled and
VLAN ID is not zero, then
turn on MCFG_RTGOPT also */
if (vid != 0)
WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
unsigned int vid, i = 0;
mac_set_vlan_cam(regs, 0, (u8 *) &vid);
if (!vlan_group_get_device(vptr->vlgrp, 0))
WORD_REG_BITS_ON(MCFG_RTGOPT, &regs->MCFG);
for (vid = 1; (vid < VLAN_VID_MASK); vid++) {
if (vlan_group_get_device(vptr->vlgrp, vid)) {
mac_set_vlan_cam(regs, i, (u8 *) &vid);
vptr->vCAMmask[i / 8] |= 0x1 << (i % 8);
if (++i >= VCAM_SIZE)
break;
}
}
vptr->vCAMmask[0] |= 1;
mac_set_vlan_cam_mask(regs, vptr->vCAMmask);
} else {
u16 temp = 0;
mac_set_vlan_cam(regs, 0, (u8 *) &temp);
temp = 1;
mac_set_vlan_cam_mask(regs, (u8 *) &temp);
}
}
static void velocity_vlan_rx_register(struct net_device *dev,
struct vlan_group *grp)
{
struct velocity_info *vptr = netdev_priv(dev);
vptr->vlgrp = grp;
}
static void velocity_vlan_rx_add_vid(struct net_device *dev, unsigned short vid)
{
struct velocity_info *vptr = netdev_priv(dev);
@ -959,11 +962,13 @@ static int __devinit velocity_found1(struct pci_dev *pdev, const struct pci_devi
dev->vlan_rx_add_vid = velocity_vlan_rx_add_vid;
dev->vlan_rx_kill_vid = velocity_vlan_rx_kill_vid;
dev->vlan_rx_register = velocity_vlan_rx_register;
#ifdef VELOCITY_ZERO_COPY_SUPPORT
dev->features |= NETIF_F_SG;
#endif
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER;
dev->features |= NETIF_F_HW_VLAN_TX | NETIF_F_HW_VLAN_FILTER |
NETIF_F_HW_VLAN_RX;
if (vptr->flags & VELOCITY_FLAGS_TX_CSUM)
dev->features |= NETIF_F_IP_CSUM;
@ -1597,8 +1602,13 @@ static int velocity_receive_frame(struct velocity_info *vptr, int idx)
skb_put(skb, pkt_len - 4);
skb->protocol = eth_type_trans(skb, vptr->dev);
if (vptr->vlgrp && (rd->rdesc0.RSR & RSR_DETAG)) {
vlan_hwaccel_rx(skb, vptr->vlgrp,
swab16(le16_to_cpu(rd->rdesc1.PQTAG)));
} else
netif_rx(skb);
stats->rx_bytes += pkt_len;
netif_rx(skb);
return 0;
}

6
drivers/net/wan/c101.c
Просмотреть файл

@ -402,7 +402,7 @@ static int __init c101_init(void)
#ifdef MODULE
printk(KERN_INFO "c101: no card initialized\n");
#endif
return -ENOSYS; /* no parameters specified, abort */
return -EINVAL; /* no parameters specified, abort */
}
printk(KERN_INFO "%s\n", version);
@ -420,11 +420,11 @@ static int __init c101_init(void)
c101_run(irq, ram);
if (*hw == '\x0')
return first_card ? 0 : -ENOSYS;
return first_card ? 0 : -EINVAL;
}while(*hw++ == ':');
printk(KERN_ERR "c101: invalid hardware parameters\n");
return first_card ? 0 : -ENOSYS;
return first_card ? 0 : -EINVAL;
}

4
drivers/net/wan/hdlc_fr.c
Просмотреть файл

@ -1090,10 +1090,6 @@ static int fr_add_pvc(struct net_device *frad, unsigned int dlci, int type)
pvc_device *pvc = NULL;
struct net_device *dev;
int result, used;
char * prefix = "pvc%d";
if (type == ARPHRD_ETHER)
prefix = "pvceth%d";
if ((pvc = add_pvc(frad, dlci)) == NULL) {
printk(KERN_WARNING "%s: Memory squeeze on fr_add_pvc()\n",

24
include/linux/phy.h
Просмотреть файл

@ -379,6 +379,18 @@ struct phy_driver {
};
#define to_phy_driver(d) container_of(d, struct phy_driver, driver)
#define PHY_ANY_ID "MATCH ANY PHY"
#define PHY_ANY_UID 0xffffffff
/* A Structure for boards to register fixups with the PHY Lib */
struct phy_fixup {
struct list_head list;
char bus_id[BUS_ID_SIZE];
u32 phy_uid;
u32 phy_uid_mask;
int (*run)(struct phy_device *phydev);
};
int phy_read(struct phy_device *phydev, u16 regnum);
int phy_write(struct phy_device *phydev, u16 regnum, u16 val);
int get_phy_id(struct mii_bus *bus, int addr, u32 *phy_id);
@ -386,8 +398,8 @@ struct phy_device* get_phy_device(struct mii_bus *bus, int addr);
int phy_clear_interrupt(struct phy_device *phydev);
int phy_config_interrupt(struct phy_device *phydev, u32 interrupts);
struct phy_device * phy_attach(struct net_device *dev,
const char *phy_id, u32 flags, phy_interface_t interface);
struct phy_device * phy_connect(struct net_device *dev, const char *phy_id,
const char *bus_id, u32 flags, phy_interface_t interface);
struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
void (*handler)(struct net_device *), u32 flags,
phy_interface_t interface);
void phy_disconnect(struct phy_device *phydev);
@ -427,5 +439,13 @@ void phy_print_status(struct phy_device *phydev);
struct phy_device* phy_device_create(struct mii_bus *bus, int addr, int phy_id);
void phy_device_free(struct phy_device *phydev);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
int phy_register_fixup_for_id(const char *bus_id,
int (*run)(struct phy_device *));
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
int phy_scan_fixups(struct phy_device *phydev);
extern struct bus_type mdio_bus_type;
#endif /* __PHY_H */

8
include/linux/xfrm.h
Просмотреть файл

@ -97,10 +97,10 @@ struct xfrm_algo {
};
struct xfrm_algo_aead {
char alg_name[64];
int alg_key_len; /* in bits */
int alg_icv_len; /* in bits */
char alg_key[0];
char alg_name[64];
unsigned int alg_key_len; /* in bits */
unsigned int alg_icv_len; /* in bits */
char alg_key[0];
};
struct xfrm_stats {

3
net/can/raw.c
Просмотреть файл

@ -573,7 +573,8 @@ static int raw_getsockopt(struct socket *sock, int level, int optname,
int fsize = ro->count * sizeof(struct can_filter);
if (len > fsize)
len = fsize;
err = copy_to_user(optval, ro->filter, len);
if (copy_to_user(optval, ro->filter, len))
err = -EFAULT;
} else
len = 0;
release_sock(sk);

5
net/core/ethtool.c
Просмотреть файл

@ -323,6 +323,11 @@ static int ethtool_get_eeprom(struct net_device *dev, void __user *useraddr)
bytes_remaining -= eeprom.len;
}
eeprom.len = userbuf - (useraddr + sizeof(eeprom));
eeprom.offset -= eeprom.len;
if (copy_to_user(useraddr, &eeprom, sizeof(eeprom)))
ret = -EFAULT;
kfree(data);
return ret;
}

2
net/dccp/probe.c
Просмотреть файл

@ -140,7 +140,7 @@ static ssize_t dccpprobe_read(struct file *file, char __user *buf,
goto out_free;
cnt = kfifo_get(dccpw.fifo, tbuf, len);
error = copy_to_user(buf, tbuf, cnt);
error = copy_to_user(buf, tbuf, cnt) ? -EFAULT : 0;
out_free:
vfree(tbuf);

9
net/ipv4/tcp_probe.c
Просмотреть файл

@ -190,19 +190,18 @@ static ssize_t tcpprobe_read(struct file *file, char __user *buf,
width = tcpprobe_sprint(tbuf, sizeof(tbuf));
if (width < len)
if (cnt + width < len)
tcp_probe.tail = (tcp_probe.tail + 1) % bufsize;
spin_unlock_bh(&tcp_probe.lock);
/* if record greater than space available
return partial buffer (so far) */
if (width >= len)
if (cnt + width >= len)
break;
error = copy_to_user(buf + cnt, tbuf, width);
if (error)
break;
if (copy_to_user(buf + cnt, tbuf, width))
return -EFAULT;
cnt += width;
}

2
net/ipv6/Kconfig
Просмотреть файл

@ -167,7 +167,7 @@ config IPV6_SIT
Tunneling means encapsulating data of one protocol type within
another protocol and sending it over a channel that understands the
encapsulating protocol. This driver implements encapsulation of IPv6
into IPv4 packets. This is useful if you want to connect two IPv6
into IPv4 packets. This is useful if you want to connect to IPv6
networks over an IPv4-only path.
Saying M here will produce a module called sit.ko. If unsure, say Y.

18
net/ipv6/raw.c
Просмотреть файл

@ -971,6 +971,19 @@ static int do_rawv6_setsockopt(struct sock *sk, int level, int optname,
switch (optname) {
case IPV6_CHECKSUM:
if (inet_sk(sk)->num == IPPROTO_ICMPV6 &&
level == IPPROTO_IPV6) {
/*
* RFC3542 tells that IPV6_CHECKSUM socket
* option in the IPPROTO_IPV6 level is not
* allowed on ICMPv6 sockets.
* If you want to set it, use IPPROTO_RAW
* level IPV6_CHECKSUM socket option
* (Linux extension).
*/
return -EINVAL;
}
/* You may get strange result with a positive odd offset;
RFC2292bis agrees with me. */
if (val > 0 && (val&1))
@ -1046,6 +1059,11 @@ static int do_rawv6_getsockopt(struct sock *sk, int level, int optname,
switch (optname) {
case IPV6_CHECKSUM:
/*
* We allow getsockopt() for IPPROTO_IPV6-level
* IPV6_CHECKSUM socket option on ICMPv6 sockets
* since RFC3542 is silent about it.
*/
if (rp->checksum == 0)
val = -1;
else

5
net/key/af_key.c
Просмотреть файл

@ -2356,7 +2356,7 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, struct sadb_msg
struct xfrm_selector sel;
struct km_event c;
struct sadb_x_sec_ctx *sec_ctx;
struct xfrm_sec_ctx *pol_ctx;
struct xfrm_sec_ctx *pol_ctx = NULL;
if (!present_and_same_family(ext_hdrs[SADB_EXT_ADDRESS_SRC-1],
ext_hdrs[SADB_EXT_ADDRESS_DST-1]) ||
@ -2396,8 +2396,7 @@ static int pfkey_spddelete(struct sock *sk, struct sk_buff *skb, struct sadb_msg
kfree(uctx);
if (err)
return err;
} else
pol_ctx = NULL;
}
xp = xfrm_policy_bysel_ctx(XFRM_POLICY_TYPE_MAIN,
pol->sadb_x_policy_dir - 1, &sel, pol_ctx,

4
net/tipc/socket.c
Просмотреть файл

@ -1756,8 +1756,8 @@ static int getsockopt(struct socket *sock,
else if (len < sizeof(value)) {
res = -EINVAL;
}
else if ((res = copy_to_user(ov, &value, sizeof(value)))) {
/* couldn't return value */
else if (copy_to_user(ov, &value, sizeof(value))) {
res = -EFAULT;
}
else {
res = put_user(sizeof(value), ol);