From 2e61c3a57747150a583b2fb54bddb5dba09aa2cf Mon Sep 17 00:00:00 2001 From: Paul Bolle Date: Tue, 19 Jun 2012 13:52:42 +0200 Subject: [PATCH] mtd: chips: reorganize Kconfig help on swapping The Kconfig help on "Flash cmd/query data swapping" still mentions LART_ENDIAN_BYTE. That option used to be relevant for setting CONFIG_MTD_CFI_LART_BIT_SWAP. That option and macro got both removed in v2.4.11-pre4. So, although LART endianness sounds intriguing, that part of the help text can be removed. And, while we're touching this choice, move the help text up one level. Currently it's available under the "NO" option, while it's relevant for all three options. Signed-off-by: Paul Bolle Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/Kconfig | 11 ++--------- 1 file changed, 2 insertions(+), 9 deletions(-) diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index b1e3c26edd6d..e469b01d40d2 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -43,9 +43,6 @@ choice prompt "Flash cmd/query data swapping" depends on MTD_CFI_ADV_OPTIONS default MTD_CFI_NOSWAP - -config MTD_CFI_NOSWAP - bool "NO" ---help--- This option defines the way in which the CPU attempts to arrange data bits when writing the 'magic' commands to the chips. Saying @@ -55,12 +52,8 @@ config MTD_CFI_NOSWAP Specific arrangements are possible with the BIG_ENDIAN_BYTE and LITTLE_ENDIAN_BYTE, if the bytes are reversed. - If you have a LART, on which the data (and address) lines were - connected in a fashion which ensured that the nets were as short - as possible, resulting in a bit-shuffling which seems utterly - random to the untrained eye, you need the LART_ENDIAN_BYTE option. - - Yes, there really exists something sicker than PDP-endian :) +config MTD_CFI_NOSWAP + bool "NO" config MTD_CFI_BE_BYTE_SWAP bool "BIG_ENDIAN_BYTE"