From 2edb84e3047b93da2f2b234219cdc304df042d9e Mon Sep 17 00:00:00 2001 From: Alexander Tsoy Date: Sat, 29 Feb 2020 18:18:15 +0300 Subject: [PATCH] ALSA: usb-audio: Add support for MOTU MicroBook IIc MicroBook IIc operates in UAC2 mode by default. This patch addresses several issues with it: - MicroBook II and IIc shares the same USB ID. We can distinguish them by interface class. - MaxPacketsOnly attribute is erroneously set in endpoint descriptors. As a result this card produces noise with all sample rates other than 96 KHz. This also causes issues like IOMMU page faults and other problems with host controller. - Sample rate changes takes more than 2 seconds for this device. Clock validity request returns false during that period, so the clock validity quirk is required. Signed-off-by: Alexander Tsoy Link: https://lore.kernel.org/r/20200229151815.14199-1-alexander@tsoy.me Signed-off-by: Takashi Iwai --- sound/usb/clock.c | 59 ++++++++++++++++++++++++++++++++-------- sound/usb/pcm.c | 7 ++++- sound/usb/quirks-table.h | 2 +- sound/usb/quirks.c | 18 +++++++++++- 4 files changed, 72 insertions(+), 14 deletions(-) diff --git a/sound/usb/clock.c b/sound/usb/clock.c index a48313dfa967..b118cf97607f 100644 --- a/sound/usb/clock.c +++ b/sound/usb/clock.c @@ -151,16 +151,15 @@ static int uac_clock_selector_set_val(struct snd_usb_audio *chip, int selector_i return ret; } -/* - * Assume the clock is valid if clock source supports only one single sample - * rate, the terminal is connected directly to it (there is no clock selector) - * and clock type is internal. This is to deal with some Denon DJ controllers - * that always reports that clock is invalid. - */ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, struct audioformat *fmt, int source_id) { + bool ret = false; + int count; + unsigned char data; + struct usb_device *dev = chip->dev; + if (fmt->protocol == UAC_VERSION_2) { struct uac_clock_source_descriptor *cs_desc = snd_usb_find_clock_source(chip->ctrl_intf, source_id); @@ -168,13 +167,51 @@ static bool uac_clock_source_is_valid_quirk(struct snd_usb_audio *chip, if (!cs_desc) return false; - return (fmt->nr_rates == 1 && - (fmt->clock & 0xff) == cs_desc->bClockID && - (cs_desc->bmAttributes & 0x3) != - UAC_CLOCK_SOURCE_TYPE_EXT); + /* + * Assume the clock is valid if clock source supports only one + * single sample rate, the terminal is connected directly to it + * (there is no clock selector) and clock type is internal. + * This is to deal with some Denon DJ controllers that always + * reports that clock is invalid. + */ + if (fmt->nr_rates == 1 && + (fmt->clock & 0xff) == cs_desc->bClockID && + (cs_desc->bmAttributes & 0x3) != + UAC_CLOCK_SOURCE_TYPE_EXT) + return true; } - return false; + /* + * MOTU MicroBook IIc + * Sample rate changes takes more than 2 seconds for this device. Clock + * validity request returns false during that period. + */ + if (chip->usb_id == USB_ID(0x07fd, 0x0004)) { + count = 0; + + while ((!ret) && (count < 50)) { + int err; + + msleep(100); + + err = snd_usb_ctl_msg(dev, usb_rcvctrlpipe(dev, 0), UAC2_CS_CUR, + USB_TYPE_CLASS | USB_RECIP_INTERFACE | USB_DIR_IN, + UAC2_CS_CONTROL_CLOCK_VALID << 8, + snd_usb_ctrl_intf(chip) | (source_id << 8), + &data, sizeof(data)); + if (err < 0) { + dev_warn(&dev->dev, + "%s(): cannot get clock validity for id %d\n", + __func__, source_id); + return false; + } + + ret = !!data; + count++; + } + } + + return ret; } static bool uac_clock_source_is_valid(struct snd_usb_audio *chip, diff --git a/sound/usb/pcm.c b/sound/usb/pcm.c index bd258f1ec2dd..a4e4064f9aee 100644 --- a/sound/usb/pcm.c +++ b/sound/usb/pcm.c @@ -357,7 +357,12 @@ static int set_sync_ep_implicit_fb_quirk(struct snd_usb_substream *subs, ep = 0x81; ifnum = 1; goto add_sync_ep_from_ifnum; - case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II/IIc */ + /* MicroBook IIc */ + if (altsd->bInterfaceClass == USB_CLASS_AUDIO) + return 0; + + /* MicroBook II */ ep = 0x84; ifnum = 0; goto add_sync_ep_from_ifnum; diff --git a/sound/usb/quirks-table.h b/sound/usb/quirks-table.h index d187aa6d50db..1c8719292eee 100644 --- a/sound/usb/quirks-table.h +++ b/sound/usb/quirks-table.h @@ -3472,7 +3472,7 @@ AU0828_DEVICE(0x2040, 0x7270, "Hauppauge", "HVR-950Q"), }, /* MOTU Microbook II */ { - USB_DEVICE(0x07fd, 0x0004), + USB_DEVICE_VENDOR_SPEC(0x07fd, 0x0004), .driver_info = (unsigned long) &(const struct snd_usb_audio_quirk) { .vendor_name = "MOTU", .product_name = "MicroBookII", diff --git a/sound/usb/quirks.c b/sound/usb/quirks.c index 915aea256f65..3cc745fe24d8 100644 --- a/sound/usb/quirks.c +++ b/sound/usb/quirks.c @@ -1352,7 +1352,15 @@ int snd_usb_apply_boot_quirk(struct usb_device *dev, case USB_ID(0x2466, 0x8010): /* Fractal Audio Axe-Fx 3 */ return snd_usb_axefx3_boot_quirk(dev); case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook II */ - return snd_usb_motu_microbookii_boot_quirk(dev); + /* + * For some reason interface 3 with vendor-spec class is + * detected on MicroBook IIc. + */ + if (get_iface_desc(intf->altsetting)->bInterfaceClass == + USB_CLASS_VENDOR_SPEC && + get_iface_desc(intf->altsetting)->bInterfaceNumber < 3) + return snd_usb_motu_microbookii_boot_quirk(dev); + break; } return 0; @@ -1790,5 +1798,13 @@ void snd_usb_audioformat_attributes_quirk(struct snd_usb_audio *chip, else fp->ep_attr |= USB_ENDPOINT_SYNC_SYNC; break; + case USB_ID(0x07fd, 0x0004): /* MOTU MicroBook IIc */ + /* + * MaxPacketsOnly attribute is erroneously set in endpoint + * descriptors. As a result this card produces noise with + * all sample rates other than 96 KHz. + */ + fp->attributes &= ~UAC_EP_CS_ATTR_FILL_MAX; + break; } }