net: dsa: sja1105: Print the reset reason

Sometimes it can be quite opaque even for me why the driver decided to
reset the switch. So instead of adding dump_stack() calls each time for
debugging, just add a reset reason to sja1105_static_config_reload
calls which gets printed to the console.

Signed-off-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
Vladimir Oltean 2019-11-12 23:22:00 +02:00 коммит произвёл David S. Miller
Родитель d438945ae5
Коммит 2eea1fa82f
4 изменённых файлов: 27 добавлений и 7 удалений

Просмотреть файл

@ -115,7 +115,15 @@ typedef enum {
} sja1105_spi_rw_mode_t;
/* From sja1105_main.c */
int sja1105_static_config_reload(struct sja1105_private *priv);
enum sja1105_reset_reason {
SJA1105_VLAN_FILTERING = 0,
SJA1105_RX_HWTSTAMPING,
SJA1105_AGEING_TIME,
SJA1105_SCHEDULING,
};
int sja1105_static_config_reload(struct sja1105_private *priv,
enum sja1105_reset_reason reason);
/* From sja1105_spi.c */
int sja1105_xfer_buf(const struct sja1105_private *priv,

Просмотреть файл

@ -1341,13 +1341,21 @@ static void sja1105_bridge_leave(struct dsa_switch *ds, int port,
sja1105_bridge_member(ds, port, br, false);
}
static const char * const sja1105_reset_reasons[] = {
[SJA1105_VLAN_FILTERING] = "VLAN filtering",
[SJA1105_RX_HWTSTAMPING] = "RX timestamping",
[SJA1105_AGEING_TIME] = "Ageing time",
[SJA1105_SCHEDULING] = "Time-aware scheduling",
};
/* For situations where we need to change a setting at runtime that is only
* available through the static configuration, resetting the switch in order
* to upload the new static config is unavoidable. Back up the settings we
* modify at runtime (currently only MAC) and restore them after uploading,
* such that this operation is relatively seamless.
*/
int sja1105_static_config_reload(struct sja1105_private *priv)
int sja1105_static_config_reload(struct sja1105_private *priv,
enum sja1105_reset_reason reason)
{
struct ptp_system_timestamp ptp_sts_before;
struct ptp_system_timestamp ptp_sts_after;
@ -1405,6 +1413,10 @@ int sja1105_static_config_reload(struct sja1105_private *priv)
out_unlock_ptp:
mutex_unlock(&priv->ptp_data.lock);
dev_info(priv->ds->dev,
"Reset switch and programmed static config. Reason: %s\n",
sja1105_reset_reasons[reason]);
/* Configure the CGU (PLLs) for MII and RMII PHYs.
* For these interfaces there is no dynamic configuration
* needed, since PLLs have same settings at all speeds.
@ -1599,7 +1611,7 @@ static int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled)
l2_lookup_params = table->entries;
l2_lookup_params->shared_learn = !enabled;
rc = sja1105_static_config_reload(priv);
rc = sja1105_static_config_reload(priv, SJA1105_VLAN_FILTERING);
if (rc)
dev_err(ds->dev, "Failed to change VLAN Ethertype\n");
@ -1871,7 +1883,7 @@ static int sja1105_set_ageing_time(struct dsa_switch *ds,
l2_lookup_params->maxage = maxage;
return sja1105_static_config_reload(priv);
return sja1105_static_config_reload(priv, SJA1105_AGEING_TIME);
}
static int sja1105_port_setup_tc(struct dsa_switch *ds, int port,

Просмотреть файл

@ -102,7 +102,7 @@ static int sja1105_change_rxtstamping(struct sja1105_private *priv,
priv->tagger_data.stampable_skb = NULL;
}
return sja1105_static_config_reload(priv);
return sja1105_static_config_reload(priv, SJA1105_RX_HWTSTAMPING);
}
int sja1105_hwtstamp_set(struct dsa_switch *ds, int port, struct ifreq *ifr)

Просмотреть файл

@ -352,7 +352,7 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
if (rc < 0)
return rc;
return sja1105_static_config_reload(priv);
return sja1105_static_config_reload(priv, SJA1105_SCHEDULING);
}
/* The cycle time extension is the amount of time the last cycle from
@ -400,7 +400,7 @@ int sja1105_setup_tc_taprio(struct dsa_switch *ds, int port,
if (rc < 0)
return rc;
return sja1105_static_config_reload(priv);
return sja1105_static_config_reload(priv, SJA1105_SCHEDULING);
}
void sja1105_tas_setup(struct dsa_switch *ds)