ARM: Device-tree updates
Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board types.
New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN and
PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).
New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop
In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor variants
of boards/platforms.
-----BEGIN PGP SIGNATURE-----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=J0qC
-----END PGP SIGNATURE-----
Merge tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM device-tree updates from Olof Johansson:
"Business as usual -- the bulk of our changes are to devicetree files
with new hardware support, new SoCs and platforms, and new board
types.
New SoCs/platforms:
- Raspberry Pi Compute Module (CM1) and IO board
- i.MX6SSL from NXP
- Renesas RZ/N1D SoC (R9A06G032), Dual Cortex-A7 with Ethernet, CAN
and PLC interfaces
- TI AM654 SoC, Quad Cortex-A53, safety subsystem with Cortex-R5
controllers, communication and PRU subsystem and lots of other
interfaces (PCIe, USB3, etc).
New boards and systems:
- Several Atmel at91-based boards from Laird
- Marvell Armada388-based Helios4 board from SolidRun
- Samsung Aires-based phones (s5pv210)
- Allwinner A64-based Pinebook laptop
In addition to the above, there's the usual amount of new devices
described on existing platforms, fixes and tweaks and new minor
variants of boards/platforms"
* tag 'armsoc-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (478 commits)
arm64: dts: sdm845: Add tsens nodes
arm64: dts: msm8996: thermal: Initialise via DT and add second controller
arm64: dts: sprd: Add one suspend timer
arm64: dts: sprd: Add SC27XX ADC device
arm64: dts: sprd: Add SC27XX eFuse device
arm64: dts: sprd: Add SC27XX vibrator device
arm64: dts: sprd: Add SC27XX breathing light controller device
arm64: dts: meson-axg: add spdif-dit codec
arm64: dts: meson-axg: add lineout codec
arm64: dts: meson-axg: add linein codec
arm64: dts: meson-axg: add tdm interfaces
arm64: dts: meson-axg: add tdmout formatters
arm64: dts: meson-axg: add tdmin formatters
arm64: dts: meson-axg: add spdifout
arm64: dts: rockchip: add led support for Firefly-RK3399
arm64: dts: rockchip: remove deprecated Type-C PHY properties on rk3399
arm64: dts: rockchip: add power button support for Firefly-RK3399
ARM: dts: aspeed: Add coprocessor interrupt controller
arm64: dts: meson-axg: add audio arb reset controller
arm64: dts: meson-axg: add usb power regulator
...
This commit is contained in:
Linus Torvalds
Коммит
2f34a64aea
|
|
@ -1,7 +0,0 @@
|
|||
Adapteva Platforms Device Tree Bindings
|
||||
---------------------------------------
|
||||
|
||||
Parallella board
|
||||
|
||||
Required root node properties:
|
||||
- compatible = "adapteva,parallella";
|
||||
|
|
@ -41,6 +41,14 @@ Boards with the Amlogic Meson GXL S905D SoC shall have the following properties:
|
|||
Required root node property:
|
||||
compatible: "amlogic,s905d", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXL S805X SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s805x", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXL S905W SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s905w", "amlogic,meson-gxl";
|
||||
|
||||
Boards with the Amlogic Meson GXM S912 SoC shall have the following properties:
|
||||
Required root node property:
|
||||
compatible: "amlogic,s912", "amlogic,meson-gxm";
|
||||
|
|
@ -79,6 +87,11 @@ Board compatible values (alphabetically, grouped by SoC):
|
|||
- "amlogic,p230" (Meson gxl s905d)
|
||||
- "amlogic,p231" (Meson gxl s905d)
|
||||
|
||||
- "amlogic,p241" (Meson gxl s805x)
|
||||
|
||||
- "amlogic,p281" (Meson gxl s905w)
|
||||
- "oranth,tx3-mini" (Meson gxl s905w)
|
||||
|
||||
- "amlogic,q200" (Meson gxm s912)
|
||||
- "amlogic,q201" (Meson gxm s912)
|
||||
- "khadas,vim2" (Meson gxm s912)
|
||||
|
|
|
|||
|
|
@ -1,14 +0,0 @@
|
|||
* Power Management Controller (PMC)
|
||||
|
||||
Required properties:
|
||||
- compatible: Should be "atmel,<chip>-pmc".
|
||||
<chip> can be: at91rm9200, at91sam9260, at91sam9g45, at91sam9n12,
|
||||
at91sam9x5, sama5d3
|
||||
|
||||
- reg: Should contain PMC registers location and length
|
||||
|
||||
Examples:
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
};
|
||||
|
|
@ -183,6 +183,7 @@ described below.
|
|||
"marvell,sheeva-v5"
|
||||
"nvidia,tegra132-denver"
|
||||
"nvidia,tegra186-denver"
|
||||
"nvidia,tegra194-carmel"
|
||||
"qcom,krait"
|
||||
"qcom,kryo"
|
||||
"qcom,kryo385"
|
||||
|
|
@ -219,6 +220,7 @@ described below.
|
|||
"qcom,kpss-acc-v1"
|
||||
"qcom,kpss-acc-v2"
|
||||
"renesas,apmu"
|
||||
"renesas,r9a06g032-smp"
|
||||
"rockchip,rk3036-smp"
|
||||
"rockchip,rk3066-smp"
|
||||
"ste,dbx500-smp"
|
||||
|
|
|
|||
|
|
@ -0,0 +1,12 @@
|
|||
* Freescale Multi Master Multi Memory Interface (M4IF) module
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "fsl,imx51-m4if"
|
||||
- reg : Address and length of the register set for the device
|
||||
|
||||
Example:
|
||||
|
||||
m4if: m4if@83fd8000 {
|
||||
compatible = "fsl,imx51-m4if";
|
||||
reg = <0x83fd8000 0x1000>;
|
||||
};
|
||||
|
|
@ -0,0 +1,12 @@
|
|||
* Freescale Tigerp platform module
|
||||
|
||||
Required properties:
|
||||
- compatible : Should be "fsl,imx51-tigerp"
|
||||
- reg : Address and length of the register set for the device
|
||||
|
||||
Example:
|
||||
|
||||
tigerp: tigerp@83fa0000 {
|
||||
compatible = "fsl,imx51-tigerp";
|
||||
reg = <0x83fa0000 0x28>;
|
||||
};
|
||||
|
|
@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board
|
|||
Required root node properties:
|
||||
- compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
|
||||
|
||||
i.MX6SLL EVK board
|
||||
Required root node properties:
|
||||
- compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
|
||||
|
||||
Generic i.MX boards
|
||||
-------------------
|
||||
|
||||
|
|
|
|||
|
|
@ -1,8 +0,0 @@
|
|||
* Insignal's Exynos4210 based Origen evaluation board
|
||||
|
||||
Origen low-cost evaluation board is based on Samsung's Exynos4210 SoC.
|
||||
|
||||
Required root node properties:
|
||||
- compatible = should be one or more of the following.
|
||||
(a) "samsung,smdkv310" - for Samsung's SMDKV310 eval board.
|
||||
(b) "samsung,exynos4210" - for boards based on Exynos4210 SoC.
|
||||
|
|
@ -51,6 +51,9 @@ Supported boards:
|
|||
- Evaluation board for MT6797(Helio X20):
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt6797-evb", "mediatek,mt6797";
|
||||
- Mediatek X20 Development Board:
|
||||
Required root node properties:
|
||||
- compatible = "archermind,mt6797-x20-dev", "mediatek,mt6797";
|
||||
- Reference board variant 1 for MT7622:
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt7622-rfb1", "mediatek,mt7622";
|
||||
|
|
@ -63,9 +66,6 @@ Supported boards:
|
|||
- Reference board for MT7623n with eMMC:
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt7623n-rfb-emmc", "mediatek,mt7623";
|
||||
- Reference board for MT7623n with NAND:
|
||||
Required root node properties:
|
||||
- compatible = "mediatek,mt7623n-rfb-nand", "mediatek,mt7623";
|
||||
- Bananapi BPI-R2 board:
|
||||
- compatible = "bananapi,bpi-r2", "mediatek,mt7623";
|
||||
- MTK mt8127 tablet moose EVB:
|
||||
|
|
|
|||
|
|
@ -7,6 +7,7 @@ Required properties:
|
|||
Should be "ti,omap2-l4-wkup" for OMAP2 family l4 wkup bus
|
||||
Should be "ti,omap3-l4-core" for OMAP3 family l4 core bus
|
||||
Should be "ti,omap4-l4-cfg" for OMAP4 family l4 cfg bus
|
||||
Should be "ti,omap4-l4-per" for OMAP4 family l4 per bus
|
||||
Should be "ti,omap4-l4-wkup" for OMAP4 family l4 wkup bus
|
||||
Should be "ti,omap5-l4-cfg" for OMAP5 family l4 cfg bus
|
||||
Should be "ti,omap5-l4-wkup" for OMAP5 family l4 wkup bus
|
||||
|
|
@ -15,11 +16,21 @@ Required properties:
|
|||
Should be "ti,am3-l4-wkup" for AM33xx family l4 wkup bus
|
||||
Should be "ti,am4-l4-wkup" for AM43xx family l4 wkup bus
|
||||
- ranges : contains the IO map range for the bus
|
||||
- reg : registers link agent and interconnect agent and access protection
|
||||
- reg-names : "la" for link agent, "ia0" to "ia3" for one to three
|
||||
interconnect agent instances, "ap" for access if it exists
|
||||
|
||||
Examples:
|
||||
|
||||
l4: l4@48000000 {
|
||||
compatible "ti,omap2-l4", "simple-bus";
|
||||
l4: interconnect@48000000 {
|
||||
compatible "ti,omap4-l4-per", "simple-bus";
|
||||
reg = <0x48000000 0x800>,
|
||||
<0x48000800 0x800>,
|
||||
<0x48001000 0x400>,
|
||||
<0x48001400 0x400>,
|
||||
<0x48001800 0x400>,
|
||||
<0x48001c00 0x400>;
|
||||
reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
ranges = <0 0x48000000 0x100000>;
|
||||
|
|
|
|||
|
|
@ -1,5 +1,10 @@
|
|||
Rockchip platforms device tree bindings
|
||||
---------------------------------------
|
||||
|
||||
- 96boards RK3399 Ficus (ROCK960 Enterprise Edition)
|
||||
Required root node properties:
|
||||
- compatible = "vamrs,ficus", "rockchip,rk3399";
|
||||
|
||||
- Amarula Vyasa RK3288 board
|
||||
Required root node properties:
|
||||
- compatible = "amarula,vyasa-rk3288", "rockchip,rk3288";
|
||||
|
|
@ -66,6 +71,15 @@ Rockchip platforms device tree bindings
|
|||
Required root node properties:
|
||||
- compatible = "geekbuying,geekbox", "rockchip,rk3368";
|
||||
|
||||
- Google Bob (Asus Chromebook Flip C101PA):
|
||||
Required root node properties:
|
||||
compatible = "google,bob-rev13", "google,bob-rev12",
|
||||
"google,bob-rev11", "google,bob-rev10",
|
||||
"google,bob-rev9", "google,bob-rev8",
|
||||
"google,bob-rev7", "google,bob-rev6",
|
||||
"google,bob-rev5", "google,bob-rev4",
|
||||
"google,bob", "google,gru", "rockchip,rk3399";
|
||||
|
||||
- Google Brain (dev-board):
|
||||
Required root node properties:
|
||||
- compatible = "google,veyron-brain-rev0", "google,veyron-brain",
|
||||
|
|
|
|||
|
|
@ -1,7 +1,10 @@
|
|||
* Samsung's Exynos SoC based boards
|
||||
* Samsung's Exynos and S5P SoC based boards
|
||||
|
||||
Required root node properties:
|
||||
- compatible = should be one or more of the following.
|
||||
- "samsung,aries" - for S5PV210-based Samsung Aries board.
|
||||
- "samsung,fascinate4g" - for S5PV210-based Samsung Galaxy S Fascinate 4G (SGH-T959P) board.
|
||||
- "samsung,galaxys" - for S5PV210-based Samsung Galaxy S (i9000) board.
|
||||
- "samsung,artik5" - for Exynos3250-based Samsung ARTIK5 module.
|
||||
- "samsung,artik5-eval" - for Exynos3250-based Samsung ARTIK5 eval board.
|
||||
- "samsung,monk" - for Exynos3250-based Samsung Simband board.
|
||||
|
|
|
|||
|
|
@ -51,7 +51,8 @@ SoCs:
|
|||
compatible = "renesas,r8a77990"
|
||||
- R-Car D3 (R8A77995)
|
||||
compatible = "renesas,r8a77995"
|
||||
|
||||
- RZ/N1D (R9A06G032)
|
||||
compatible = "renesas,r9a06g032"
|
||||
|
||||
Boards:
|
||||
|
||||
|
|
@ -112,6 +113,8 @@ Boards:
|
|||
compatible = "renesas,porter", "renesas,r8a7791"
|
||||
- RSKRZA1 (YR0K77210C000BE)
|
||||
compatible = "renesas,rskrza1", "renesas,r7s72100"
|
||||
- RZN1D-DB (RZ/N1D Demo Board for the RZ/N1D 400 pins package)
|
||||
compatible = "renesas,rzn1d400-db", "renesas,r9a06g032"
|
||||
- Salvator-X (RTP0RC7795SIPB0010S)
|
||||
compatible = "renesas,salvator-x", "renesas,r8a7795"
|
||||
- Salvator-X (RTP0RC7796SIPB0011S)
|
||||
|
|
|
|||
|
|
@ -0,0 +1,23 @@
|
|||
Texas Instruments K3 Multicore SoC architecture device tree bindings
|
||||
--------------------------------------------------------------------
|
||||
|
||||
Platforms based on Texas Instruments K3 Multicore SoC architecture
|
||||
shall follow the following scheme:
|
||||
|
||||
SoCs
|
||||
----
|
||||
|
||||
Each device tree root node must specify which exact SoC in K3 Multicore SoC
|
||||
architecture it uses, using one of the following compatible values:
|
||||
|
||||
- AM654
|
||||
compatible = "ti,am654";
|
||||
|
||||
Boards
|
||||
------
|
||||
|
||||
In addition, each device tree root node must specify which one or more
|
||||
of the following board-specific compatible values:
|
||||
|
||||
- AM654 EVM
|
||||
compatible = "ti,am654-evm", "ti,am654";
|
||||
|
|
@ -8,18 +8,38 @@ Required root node properties:
|
|||
|
||||
Additional compatible strings:
|
||||
|
||||
- Xilinx internal board cc108
|
||||
- Adapteva Parallella board
|
||||
"adapteva,parallella"
|
||||
|
||||
- Avnet MicroZed board
|
||||
"avnet,zynq-microzed"
|
||||
"xlnx,zynq-microzed"
|
||||
|
||||
- Avnet ZedBoard board
|
||||
"avnet,zynq-zed"
|
||||
"xlnx,zynq-zed"
|
||||
|
||||
- Digilent Zybo board
|
||||
"digilent,zynq-zybo"
|
||||
|
||||
- Digilent Zybo Z7 board
|
||||
"digilent,zynq-zybo-z7"
|
||||
|
||||
- Xilinx CC108 internal board
|
||||
"xlnx,zynq-cc108"
|
||||
|
||||
- Xilinx internal board zc770 with different FMC cards
|
||||
- Xilinx ZC702 internal board
|
||||
"xlnx,zynq-zc702"
|
||||
|
||||
- Xilinx ZC706 internal board
|
||||
"xlnx,zynq-zc706"
|
||||
|
||||
- Xilinx ZC770 internal board, with different FMC cards
|
||||
"xlnx,zynq-zc770-xm010"
|
||||
"xlnx,zynq-zc770-xm011"
|
||||
"xlnx,zynq-zc770-xm012"
|
||||
"xlnx,zynq-zc770-xm013"
|
||||
|
||||
- Digilent Zybo Z7 board
|
||||
"digilent,zynq-zybo-z7"
|
||||
|
||||
---------------------------------------------------------------
|
||||
|
||||
Xilinx Zynq UltraScale+ MPSoC Platforms Device Tree Bindings
|
||||
|
|
|
|||
|
|
@ -17,14 +17,13 @@ Required properties:
|
|||
"atmel,at91sam9x5-clk-slow-rc-osc":
|
||||
at91 internal slow RC oscillator
|
||||
|
||||
"atmel,at91rm9200-pmc" or
|
||||
"atmel,at91sam9g45-pmc" or
|
||||
"atmel,at91sam9n12-pmc" or
|
||||
"atmel,at91sam9x5-pmc" or
|
||||
"atmel,sama5d3-pmc":
|
||||
"atmel,<chip>-pmc":
|
||||
at91 PMC (Power Management Controller)
|
||||
All at91 specific clocks (clocks defined below) must be child
|
||||
node of the PMC node.
|
||||
<chip> can be: at91rm9200, at91sam9260, at91sam9261,
|
||||
at91sam9263, at91sam9g45, at91sam9n12, at91sam9rl, at91sam9x5,
|
||||
sama5d2, sama5d3 or sama5d4.
|
||||
|
||||
"atmel,at91sam9x5-clk-slow" (under sckc node)
|
||||
or
|
||||
|
|
|
|||
|
|
@ -40,6 +40,7 @@ video decode local arbiter, all these ports are according to the video HW.
|
|||
Required properties:
|
||||
- compatible : must be one of the following string:
|
||||
"mediatek,mt2701-m4u" for mt2701 which uses generation one m4u HW.
|
||||
"mediatek,mt2712-m4u" for mt2712 which uses generation two m4u HW.
|
||||
"mediatek,mt8173-m4u" for mt8173 which uses generation two m4u HW.
|
||||
- reg : m4u register base and size.
|
||||
- interrupts : the interrupt of m4u.
|
||||
|
|
@ -50,8 +51,9 @@ Required properties:
|
|||
according to the local arbiter index, like larb0, larb1, larb2...
|
||||
- iommu-cells : must be 1. This is the mtk_m4u_id according to the HW.
|
||||
Specifies the mtk_m4u_id as defined in
|
||||
dt-binding/memory/mt2701-larb-port.h for mt2701 and
|
||||
dt-binding/memory/mt8173-larb-port.h for mt8173
|
||||
dt-binding/memory/mt2701-larb-port.h for mt2701,
|
||||
dt-binding/memory/mt2712-larb-port.h for mt2712, and
|
||||
dt-binding/memory/mt8173-larb-port.h for mt8173.
|
||||
|
||||
Example:
|
||||
iommu: iommu@10205000 {
|
||||
|
|
|
|||
|
|
@ -2,8 +2,9 @@ SMI (Smart Multimedia Interface) Common
|
|||
|
||||
The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
|
||||
|
||||
Mediatek SMI have two generations of HW architecture, mt8173 uses the second
|
||||
generation of SMI HW while mt2701 uses the first generation HW of SMI.
|
||||
Mediatek SMI have two generations of HW architecture, mt2712 and mt8173 use
|
||||
the second generation of SMI HW while mt2701 uses the first generation HW of
|
||||
SMI.
|
||||
|
||||
There's slight differences between the two SMI, for generation 2, the
|
||||
register which control the iommu port is at each larb's register base. But
|
||||
|
|
@ -15,6 +16,7 @@ not needed for SMI generation 2.
|
|||
Required properties:
|
||||
- compatible : must be one of :
|
||||
"mediatek,mt2701-smi-common"
|
||||
"mediatek,mt2712-smi-common"
|
||||
"mediatek,mt8173-smi-common"
|
||||
- reg : the register and size of the SMI block.
|
||||
- power-domains : a phandle to the power domain of this local arbiter.
|
||||
|
|
|
|||
|
|
@ -4,8 +4,9 @@ The hardware block diagram please check bindings/iommu/mediatek,iommu.txt
|
|||
|
||||
Required properties:
|
||||
- compatible : must be one of :
|
||||
"mediatek,mt8173-smi-larb"
|
||||
"mediatek,mt2701-smi-larb"
|
||||
"mediatek,mt2712-smi-larb"
|
||||
"mediatek,mt8173-smi-larb"
|
||||
- reg : the register and size of this local arbiter.
|
||||
- mediatek,smi : a phandle to the smi_common node.
|
||||
- power-domains : a phandle to the power domain of this local arbiter.
|
||||
|
|
@ -15,7 +16,7 @@ Required properties:
|
|||
the register.
|
||||
- "smi" : It's the clock for transfer data and command.
|
||||
|
||||
Required property for mt2701:
|
||||
Required property for mt2701 and mt2712:
|
||||
- mediatek,larb-id :the hardware id of this larb.
|
||||
|
||||
Example:
|
||||
|
|
|
|||
|
|
@ -16,6 +16,8 @@ Required properties:
|
|||
* "allwinner,sun9i-a80-mmc"
|
||||
* "allwinner,sun50i-a64-emmc"
|
||||
* "allwinner,sun50i-a64-mmc"
|
||||
* "allwinner,sun50i-h6-emmc", "allwinner.sun50i-a64-emmc"
|
||||
* "allwinner,sun50i-h6-mmc", "allwinner.sun50i-a64-mmc"
|
||||
- reg : mmc controller base registers
|
||||
- clocks : a list with 4 phandle + clock specifier pairs
|
||||
- clock-names : must contain "ahb", "mmc", "output" and "sample"
|
||||
|
|
|
|||
|
|
@ -19,8 +19,6 @@ Required properties:
|
|||
- reset-names: must be "stmmaceth"
|
||||
- phy-mode: See ethernet.txt
|
||||
- phy-handle: See ethernet.txt
|
||||
- #address-cells: shall be 1
|
||||
- #size-cells: shall be 0
|
||||
- syscon: A phandle to the device containing the EMAC or GMAC clock register
|
||||
|
||||
Optional properties:
|
||||
|
|
@ -86,8 +84,6 @@ emac: ethernet@1c0b000 {
|
|||
reset-names = "stmmaceth";
|
||||
clocks = <&ccu CLK_BUS_EMAC>;
|
||||
clock-names = "stmmaceth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy-handle = <&int_mii_phy>;
|
||||
phy-mode = "mii";
|
||||
|
|
@ -137,8 +133,6 @@ emac: ethernet@1c0b000 {
|
|||
reset-names = "stmmaceth";
|
||||
clocks = <&ccu CLK_BUS_EMAC>;
|
||||
clock-names = "stmmaceth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
|
|
@ -191,8 +185,6 @@ emac: ethernet@1c0b000 {
|
|||
reset-names = "stmmaceth";
|
||||
clocks = <&ccu CLK_BUS_EMAC>;
|
||||
clock-names = "stmmaceth";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
phy-handle = <&ext_rgmii_phy>;
|
||||
phy-mode = "rgmii";
|
||||
|
|
|
|||
|
|
@ -17,20 +17,18 @@ Example:
|
|||
|
||||
/* upstream device */
|
||||
|
||||
ssp0: ssp@41000000 {
|
||||
ssp1: ssp@41000000 {
|
||||
compatible = "mrvl,pxa3xx-ssp";
|
||||
reg = <0x41000000 0x40>;
|
||||
interrupts = <24>;
|
||||
clock-names = "pxa27x-ssp.0";
|
||||
dmas = <&dma 13
|
||||
&dma 14>;
|
||||
dma-names = "rx", "tx";
|
||||
};
|
||||
|
||||
/* DAI as user */
|
||||
|
||||
ssp_dai0: ssp_dai@0 {
|
||||
compatible = "mrvl,pxa-ssp-dai";
|
||||
port = <&ssp0>;
|
||||
port = <&ssp1>;
|
||||
#sound-dai-cells = <0>;
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -0,0 +1,37 @@
|
|||
* Device tree bindings for Texas Instruments DaVinci timer
|
||||
|
||||
This document provides bindings for the 64-bit timer in the DaVinci
|
||||
architecture devices. The timer can be configured as a general-purpose 64-bit
|
||||
timer, dual general-purpose 32-bit timers. When configured as dual 32-bit
|
||||
timers, each half can operate in conjunction (chain mode) or independently
|
||||
(unchained mode) of each other.
|
||||
|
||||
The timer is a free running up-counter and can generate interrupts when the
|
||||
counter reaches preset counter values.
|
||||
|
||||
Also see ../watchdog/davinci-wdt.txt for timers that are configurable as
|
||||
watchdog timers.
|
||||
|
||||
Required properties:
|
||||
|
||||
- compatible : should be "ti,da830-timer".
|
||||
- reg : specifies base physical address and count of the registers.
|
||||
- interrupts : interrupts generated by the timer.
|
||||
- interrupt-names: should be "tint12", "tint34", "cmpint0", "cmpint1",
|
||||
"cmpint2", "cmpint3", "cmpint4", "cmpint5", "cmpint6",
|
||||
"cmpint7" ("cmpintX" may be omitted if not present in the
|
||||
hardware).
|
||||
- clocks : the clock feeding the timer clock.
|
||||
|
||||
Example:
|
||||
|
||||
clocksource: timer@20000 {
|
||||
compatible = "ti,da830-timer";
|
||||
reg = <0x20000 0x1000>;
|
||||
interrupts = <21>, <22>, <74>, <75>, <76>, <77>, <78>, <79>,
|
||||
<80>, <81>;
|
||||
interrupt-names = "tint12", "tint34", "cmpint0", "cmpint1",
|
||||
"cmpint2", "cmpint3", "cmpint4", "cmpint5",
|
||||
"cmpint6", "cmpint7";
|
||||
clocks = <&pll0_auxclk>;
|
||||
};
|
||||
|
|
@ -142,6 +142,7 @@ geekbuying GeekBuying
|
|||
gef GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
GEFanuc GE Fanuc Intelligent Platforms Embedded Systems, Inc.
|
||||
geniatech Geniatech, Inc.
|
||||
giantec Giantec Semiconductor, Inc.
|
||||
giantplus Giantplus Technology Co., Ltd.
|
||||
globalscale Globalscale Technologies, Inc.
|
||||
gmt Global Mixed-mode Technology, Inc.
|
||||
|
|
@ -200,6 +201,7 @@ koe Kaohsiung Opto-Electronics Inc.
|
|||
kosagi Sutajio Ko-Usagi PTE Ltd.
|
||||
kyo Kyocera Corporation
|
||||
lacie LaCie
|
||||
laird Laird PLC
|
||||
lantiq Lantiq Semiconductor
|
||||
lattice Lattice Semiconductor
|
||||
lego LEGO Systems A/S
|
||||
|
|
@ -279,6 +281,7 @@ opalkelly Opal Kelly Incorporated
|
|||
opencores OpenCores.org
|
||||
openrisc OpenRISC.io
|
||||
option Option NV
|
||||
oranth Shenzhen Oranth Technology Co., Ltd.
|
||||
ORCL Oracle Corporation
|
||||
orisetech Orise Technology
|
||||
ortustech Ortus Technology Co., Ltd.
|
||||
|
|
@ -322,6 +325,7 @@ rohm ROHM Semiconductor Co., Ltd
|
|||
roofull Shenzhen Roofull Technology Co, Ltd
|
||||
samsung Samsung Semiconductor
|
||||
samtec Samtec/Softing company
|
||||
sancloud Sancloud Ltd
|
||||
sandisk Sandisk Corporation
|
||||
sbs Smart Battery System
|
||||
schindler Schindler
|
||||
|
|
@ -401,6 +405,7 @@ upisemi uPI Semiconductor Corp.
|
|||
urt United Radiant Technology Corporation
|
||||
usi Universal Scientific Industrial Co., Ltd.
|
||||
v3 V3 Semiconductor
|
||||
vamrs Vamrs Ltd.
|
||||
variscite Variscite Ltd.
|
||||
via VIA Technologies, Inc.
|
||||
virtio Virtual I/O Device Specification, developed by the OASIS consortium
|
||||
|
|
|
|||
10
MAINTAINERS
10
MAINTAINERS
|
|
@ -2014,6 +2014,7 @@ S: Supported
|
|||
F: arch/arm/boot/dts/emev2*
|
||||
F: arch/arm/boot/dts/r7s*
|
||||
F: arch/arm/boot/dts/r8a*
|
||||
F: arch/arm/boot/dts/r9a*
|
||||
F: arch/arm/boot/dts/sh*
|
||||
F: arch/arm/configs/shmobile_defconfig
|
||||
F: arch/arm/include/debug/renesas-scif.S
|
||||
|
|
@ -2132,6 +2133,15 @@ L: linux-kernel@vger.kernel.org
|
|||
S: Maintained
|
||||
F: drivers/memory/*emif*
|
||||
|
||||
ARM/TEXAS INSTRUMENTS K3 ARCHITECTURE
|
||||
M: Tero Kristo <t-kristo@ti.com>
|
||||
M: Nishanth Menon <nm@ti.com>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
S: Supported
|
||||
F: Documentation/devicetree/bindings/arm/ti/k3.txt
|
||||
F: arch/arm64/boot/dts/ti/Makefile
|
||||
F: arch/arm64/boot/dts/ti/k3-*
|
||||
|
||||
ARM/TEXAS INSTRUMENT KEYSTONE ARCHITECTURE
|
||||
M: Santosh Shilimkar <ssantosh@kernel.org>
|
||||
L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
|
||||
|
|
|
|||
|
|
@ -38,6 +38,7 @@ dtb-$(CONFIG_SOC_AT91SAM9) += \
|
|||
at91-ariettag25.dtb \
|
||||
at91-cosino_mega2560.dtb \
|
||||
at91-kizboxmini.dtb \
|
||||
at91-wb45n.dtb \
|
||||
at91sam9g15ek.dtb \
|
||||
at91sam9g25ek.dtb \
|
||||
at91sam9g35ek.dtb \
|
||||
|
|
@ -50,7 +51,10 @@ dtb-$(CONFIG_SOC_SAM_V7) += \
|
|||
at91-sama5d2_ptc_ek.dtb \
|
||||
at91-sama5d2_xplained.dtb \
|
||||
at91-sama5d3_xplained.dtb \
|
||||
at91-dvk_som60.dtb \
|
||||
at91-gatwick.dtb \
|
||||
at91-tse850-3.dtb \
|
||||
at91-wb50n.dtb \
|
||||
sama5d31ek.dtb \
|
||||
sama5d33ek.dtb \
|
||||
sama5d34ek.dtb \
|
||||
|
|
@ -73,6 +77,7 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
|
|||
bcm2835-rpi-b-rev2.dtb \
|
||||
bcm2835-rpi-b-plus.dtb \
|
||||
bcm2835-rpi-a-plus.dtb \
|
||||
bcm2835-rpi-cm1-io1.dtb \
|
||||
bcm2836-rpi-2-b.dtb \
|
||||
bcm2837-rpi-3-b.dtb \
|
||||
bcm2837-rpi-3-b-plus.dtb \
|
||||
|
|
@ -200,6 +205,7 @@ dtb-$(CONFIG_ARCH_GEMINI) += \
|
|||
gemini-dlink-dns-313.dtb \
|
||||
gemini-nas4220b.dtb \
|
||||
gemini-rut1xx.dtb \
|
||||
gemini-sl93512r.dtb \
|
||||
gemini-sq201.dtb \
|
||||
gemini-wbd111.dtb \
|
||||
gemini-wbd222.dtb
|
||||
|
|
@ -345,7 +351,8 @@ dtb-$(CONFIG_SOC_IMX27) += \
|
|||
imx27-phytec-phycore-rdk.dtb \
|
||||
imx27-phytec-phycard-s-rdk.dtb
|
||||
dtb-$(CONFIG_SOC_IMX31) += \
|
||||
imx31-bug.dtb
|
||||
imx31-bug.dtb \
|
||||
imx31-lite.dtb
|
||||
dtb-$(CONFIG_SOC_IMX35) += \
|
||||
imx35-eukrea-mbimxsd35-baseboard.dtb \
|
||||
imx35-pdk.dtb
|
||||
|
|
@ -358,10 +365,14 @@ dtb-$(CONFIG_SOC_IMX51) += \
|
|||
imx51-digi-connectcore-jsk.dtb \
|
||||
imx51-eukrea-mbimxsd51-baseboard.dtb \
|
||||
imx51-ts4800.dtb \
|
||||
imx51-zii-rdu1.dtb
|
||||
imx51-zii-rdu1.dtb \
|
||||
imx51-zii-scu2-mezz.dtb \
|
||||
imx51-zii-scu3-esb.dtb
|
||||
dtb-$(CONFIG_SOC_IMX53) += \
|
||||
imx53-ard.dtb \
|
||||
imx53-cx9020.dtb \
|
||||
imx53-kp-ddc.dtb \
|
||||
imx53-kp-hsc.dtb \
|
||||
imx53-m53evk.dtb \
|
||||
imx53-mba53.dtb \
|
||||
imx53-ppd.dtb \
|
||||
|
|
@ -400,6 +411,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
imx6dl-hummingboard2-emmc-som-v15.dtb \
|
||||
imx6dl-hummingboard2-som-v15.dtb \
|
||||
imx6dl-icore.dtb \
|
||||
imx6dl-icore-mipi.dtb \
|
||||
imx6dl-icore-rqs.dtb \
|
||||
imx6dl-mamoj.dtb \
|
||||
imx6dl-nit6xlite.dtb \
|
||||
|
|
@ -521,6 +533,8 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
|
|||
dtb-$(CONFIG_SOC_IMX6SL) += \
|
||||
imx6sl-evk.dtb \
|
||||
imx6sl-warp.dtb
|
||||
dtb-$(CONFIG_SOC_IMX6SLL) += \
|
||||
imx6sll-evk.dtb
|
||||
dtb-$(CONFIG_SOC_IMX6SX) += \
|
||||
imx6sx-nitrogen6sx.dtb \
|
||||
imx6sx-sabreauto.dtb \
|
||||
|
|
@ -533,6 +547,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
|
|||
imx6sx-udoo-neo-full.dtb
|
||||
dtb-$(CONFIG_SOC_IMX6UL) += \
|
||||
imx6ul-14x14-evk.dtb \
|
||||
imx6ul-ccimx6ulsbcexpress.dtb \
|
||||
imx6ul-geam.dtb \
|
||||
imx6ul-isiot-emmc.dtb \
|
||||
imx6ul-isiot-nand.dtb \
|
||||
|
|
@ -567,8 +582,10 @@ dtb-$(CONFIG_SOC_VF610) += \
|
|||
vf610-cosmic.dtb \
|
||||
vf610m4-cosmic.dtb \
|
||||
vf610-twr.dtb \
|
||||
vf610-zii-cfu1.dtb \
|
||||
vf610-zii-dev-rev-b.dtb \
|
||||
vf610-zii-dev-rev-c.dtb
|
||||
vf610-zii-dev-rev-c.dtb \
|
||||
vf610-zii-ssmb-spu3.dtb
|
||||
dtb-$(CONFIG_ARCH_MXS) += \
|
||||
imx23-evk.dtb \
|
||||
imx23-olinuxino.dtb \
|
||||
|
|
@ -695,10 +712,12 @@ dtb-$(CONFIG_SOC_AM33XX) += \
|
|||
am335x-pepper.dtb \
|
||||
am335x-phycore-rdk.dtb \
|
||||
am335x-pocketbeagle.dtb \
|
||||
am335x-sancloud-bbe.dtb \
|
||||
am335x-shc.dtb \
|
||||
am335x-sbc-t335.dtb \
|
||||
am335x-sl50.dtb \
|
||||
am335x-wega-rdk.dtb
|
||||
am335x-wega-rdk.dtb \
|
||||
am335x-osd3358-sm-red.dtb
|
||||
dtb-$(CONFIG_ARCH_OMAP4) += \
|
||||
omap4-droid4-xt894.dtb \
|
||||
omap4-duovero-parlor.dtb \
|
||||
|
|
@ -819,6 +838,7 @@ dtb-$(CONFIG_ARCH_RENESAS) += \
|
|||
r8a7793-gose.dtb \
|
||||
r8a7794-alt.dtb \
|
||||
r8a7794-silk.dtb \
|
||||
r9a06g032-rzn1d400-db.dtb \
|
||||
sh73a0-kzm9g.dtb
|
||||
dtb-$(CONFIG_ARCH_ROCKCHIP) += \
|
||||
rv1108-evb.dtb \
|
||||
|
|
@ -859,6 +879,8 @@ dtb-$(CONFIG_ARCH_S3C64XX) += \
|
|||
s3c6410-smdk6410.dtb
|
||||
dtb-$(CONFIG_ARCH_S5PV210) += \
|
||||
s5pv210-aquila.dtb \
|
||||
s5pv210-fascinate4g.dtb \
|
||||
s5pv210-galaxys.dtb \
|
||||
s5pv210-goni.dtb \
|
||||
s5pv210-smdkc110.dtb \
|
||||
s5pv210-smdkv210.dtb \
|
||||
|
|
@ -1039,7 +1061,7 @@ dtb-$(CONFIG_ARCH_TANGO) += \
|
|||
tango4-vantage-1172.dtb
|
||||
dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
|
||||
tegra20-harmony.dtb \
|
||||
tegra20-iris-512.dtb \
|
||||
tegra20-colibri-iris.dtb \
|
||||
tegra20-medcom-wide.dtb \
|
||||
tegra20-paz00.dtb \
|
||||
tegra20-plutux.dtb \
|
||||
|
|
@ -1109,6 +1131,7 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \
|
|||
zynq-zc770-xm012.dtb \
|
||||
zynq-zc770-xm013.dtb \
|
||||
zynq-zed.dtb \
|
||||
zynq-zturn.dtb \
|
||||
zynq-zybo.dtb \
|
||||
zynq-zybo-z7.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_370) += \
|
||||
|
|
@ -1138,6 +1161,7 @@ dtb-$(CONFIG_MACH_ARMADA_38X) += \
|
|||
armada-388-clearfog-pro.dtb \
|
||||
armada-388-db.dtb \
|
||||
armada-388-gp.dtb \
|
||||
armada-388-helios4.dtb \
|
||||
armada-388-rd.dtb
|
||||
dtb-$(CONFIG_MACH_ARMADA_39X) += \
|
||||
armada-398-db.dtb
|
||||
|
|
@ -1168,7 +1192,6 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
|
|||
mt7623a-rfb-emmc.dtb \
|
||||
mt7623a-rfb-nand.dtb \
|
||||
mt7623n-rfb-emmc.dtb \
|
||||
mt7623n-rfb-nand.dtb \
|
||||
mt7623n-bananapi-bpi-r2.dtb \
|
||||
mt8127-moose.dtb \
|
||||
mt8135-evbp1.dtb
|
||||
|
|
|
|||
|
|
@ -396,7 +396,7 @@
|
|||
compatible = "ti,wl1835";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <7 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <7 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -778,7 +778,7 @@
|
|||
compatible = "ti,wl1835";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <17 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <17 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -690,7 +690,7 @@
|
|||
compatible = "ti,wl1271";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <31 IRQ_TYPE_LEVEL_HIGH>; /* gpio 31 */
|
||||
interrupts = <31 IRQ_TYPE_EDGE_RISING>; /* gpio 31 */
|
||||
ref-clock-frequency = <38400000>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -0,0 +1,457 @@
|
|||
//SPDX-License-Identifier: GPL-2.0
|
||||
/* Copyright (C) 2018 Octavo Systems LLC - http://www.octavosystems.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-osd335x-common.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
#include <dt-bindings/display/tda998x.h>
|
||||
|
||||
/ {
|
||||
model = "Octavo Systems OSD3358-SM-RED";
|
||||
compatible = "oct,osd3358-sm-refdesign", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
|
||||
};
|
||||
|
||||
&ldo3_reg {
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
vmmc-supply = <&vmmcsd_fixed>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&emmc_pins>;
|
||||
bus-width = <8>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
nxp_hdmi_bonelt_pins: nxp-hdmi-bonelt-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
|
||||
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
|
||||
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
|
||||
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
|
||||
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
|
||||
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
|
||||
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
|
||||
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
|
||||
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
|
||||
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
|
||||
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
|
||||
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
|
||||
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
|
||||
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
|
||||
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
|
||||
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
|
||||
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
|
||||
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
|
||||
AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
|
||||
AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
|
||||
AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
|
||||
>;
|
||||
};
|
||||
|
||||
nxp_hdmi_bonelt_off_pins: nxp-hdmi-bonelt-off-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9b0, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr0 */
|
||||
>;
|
||||
};
|
||||
|
||||
mcasp0_pins: mcasp0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLUP | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
|
||||
AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2*/
|
||||
AM33XX_IOPAD(0x994, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
|
||||
AM33XX_IOPAD(0x990, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
|
||||
AM33XX_IOPAD(0x86c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.GPIO1_27 */
|
||||
>;
|
||||
};
|
||||
|
||||
flash_enable: flash-enable {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* rmii1_ref_clk.gpio0_29 */
|
||||
>;
|
||||
};
|
||||
|
||||
imu_interrupt: imu-interrupt {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x910, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_rx_er.gpio3_2 */
|
||||
>;
|
||||
};
|
||||
|
||||
ethernet_interrupt: ethernet-interrupt{
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x908, PIN_INPUT_PULLDOWN | MUX_MODE7) /* mii1_col.gpio3_0 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
|
||||
/* If you want to get 24 bit RGB and 16 BGR mode instead of
|
||||
* current 16 bit RGB and 24 BGR modes, set the propety
|
||||
* below to "crossed" and uncomment the video-ports -property
|
||||
* in tda19988 node.
|
||||
* AM335x errata for wiring:
|
||||
* http://www.ti.com/lit/er/sprz360i/sprz360i.pdf
|
||||
*/
|
||||
|
||||
blue-and-red-wiring = "straight";
|
||||
|
||||
port {
|
||||
lcdc_0: endpoint {
|
||||
remote-endpoint = <&hdmi_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
tda19988: hdmi-encoder@70 {
|
||||
compatible = "nxp,tda998x";
|
||||
reg = <0x70>;
|
||||
|
||||
pinctrl-names = "default", "off";
|
||||
pinctrl-0 = <&nxp_hdmi_bonelt_pins>;
|
||||
pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>;
|
||||
|
||||
/* Convert 24bit BGR to RGB, e.g. cross red and blue wiring */
|
||||
/* video-ports = <0x234501>; */
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
audio-ports = < TDA998x_I2S 0x03>;
|
||||
|
||||
port {
|
||||
hdmi_0: endpoint {
|
||||
remote-endpoint = <&lcdc_0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
mpu9250: imu@68 {
|
||||
compatible = "invensense,mpu6050";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio3>;
|
||||
interrupts = <21 IRQ_TYPE_EDGE_RISING>;
|
||||
i2c-gate {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
ax8975@c {
|
||||
compatible = "ak,ak8975";
|
||||
reg = <0x0c>;
|
||||
};
|
||||
};
|
||||
/*invensense,int_config = <0x10>;
|
||||
invensense,level_shifter = <0>;
|
||||
invensense,orientation = [01 00 00 00 01 00 00 00 01];
|
||||
invensense,sec_slave_type = <0>;
|
||||
invensense,key = [4e cc 7e eb f6 1e 35 22 00 34 0d 65 32 e9 94 89];*/
|
||||
};
|
||||
|
||||
bmp280: pressure@78 {
|
||||
compatible = "bosch,bmp280";
|
||||
reg = <0x76>;
|
||||
};
|
||||
};
|
||||
|
||||
&rtc {
|
||||
system-power-controller;
|
||||
};
|
||||
|
||||
&mcasp0 {
|
||||
#sound-dai-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcasp0_pins>;
|
||||
status = "okay";
|
||||
op-mode = <0>; /* MCASP_IIS_MODE */
|
||||
tdm-slots = <2>;
|
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
||||
0 0 1 0
|
||||
>;
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
};
|
||||
|
||||
/ {
|
||||
clk_mcasp0_fixed: clk-mcasp0-fixed {
|
||||
#clock-cells = <0>;
|
||||
compatible = "fixed-clock";
|
||||
clock-frequency = <24576000>;
|
||||
};
|
||||
|
||||
clk_mcasp0: clk-mcasp0 {
|
||||
#clock-cells = <0>;
|
||||
compatible = "gpio-gate-clock";
|
||||
clocks = <&clk_mcasp0_fixed>;
|
||||
enable-gpios = <&gpio1 27 0>; /* BeagleBone Black Clk enable on GPIO1_27 */
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "simple-audio-card";
|
||||
simple-audio-card,name = "TI BeagleBone Black";
|
||||
simple-audio-card,format = "i2s";
|
||||
simple-audio-card,bitclock-master = <&dailink0_master>;
|
||||
simple-audio-card,frame-master = <&dailink0_master>;
|
||||
|
||||
dailink0_master: simple-audio-card,cpu {
|
||||
sound-dai = <&mcasp0>;
|
||||
clocks = <&clk_mcasp0>;
|
||||
};
|
||||
|
||||
simple-audio-card,codec {
|
||||
sound-dai = <&tda19988>;
|
||||
};
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = &uart0;
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_s0>;
|
||||
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led2 {
|
||||
label = "beaglebone:green:usr0";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "beaglebone:green:usr1";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led4 {
|
||||
label = "beaglebone:green:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "cpu0";
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led5 {
|
||||
label = "beaglebone:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>;
|
||||
linux,default-trigger = "mmc1";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
};
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&clkout2_pin>;
|
||||
|
||||
user_leds_s0: user-leds-s0 {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x854, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
AM33XX_IOPAD(0x858, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a6.gpio1_22 */
|
||||
AM33XX_IOPAD(0x85c, PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpmc_a7.gpio1_23 */
|
||||
AM33XX_IOPAD(0x860, PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_a8.gpio1_24 */
|
||||
>;
|
||||
};
|
||||
|
||||
i2c2_pins: pinmux-i2c2-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x978, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_ctsn.i2c2_sda */
|
||||
AM33XX_IOPAD(0x97c, PIN_INPUT_PULLUP | MUX_MODE3) /* uart1_rtsn.i2c2_scl */
|
||||
>;
|
||||
};
|
||||
|
||||
uart0_pins: pinmux-uart0-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x970, PIN_INPUT_PULLUP | MUX_MODE0) /* uart0_rxd.uart0_rxd */
|
||||
AM33XX_IOPAD(0x974, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart0_txd.uart0_txd */
|
||||
>;
|
||||
};
|
||||
|
||||
clkout2_pin: pinmux-clkout2-pin {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9b4, PIN_OUTPUT_PULLDOWN | MUX_MODE3) /* xdma_event_intr1.clkout2 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_default: cpsw-default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
|
||||
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
|
||||
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_txd3 */
|
||||
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_txd2 */
|
||||
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_txd1 */
|
||||
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_txd0 */
|
||||
AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_txclk */
|
||||
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rxclk */
|
||||
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rxd3 */
|
||||
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rxd2 */
|
||||
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rxd1 */
|
||||
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rxd0 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw-sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci-mdio-default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci-mdio-sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
mmc1_pins: pinmux-mmc1-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x960, PIN_INPUT | MUX_MODE7) /* (C15) spi0_cs1.gpio0[6] */
|
||||
AM33XX_IOPAD(0x8fc, PIN_INPUT_PULLUP | MUX_MODE0) /* (G16) mmc0_dat0.mmc0_dat0 */
|
||||
AM33XX_IOPAD(0x8f8, PIN_INPUT_PULLUP | MUX_MODE0) /* (G15) mmc0_dat1.mmc0_dat1 */
|
||||
AM33XX_IOPAD(0x8f4, PIN_INPUT_PULLUP | MUX_MODE0) /* (F18) mmc0_dat2.mmc0_dat2 */
|
||||
AM33XX_IOPAD(0x8f0, PIN_INPUT_PULLUP | MUX_MODE0) /* (F17) mmc0_dat3.mmc0_dat3 */
|
||||
AM33XX_IOPAD(0x904, PIN_INPUT_PULLUP | MUX_MODE0) /* (G18) mmc0_cmd.mmc0_cmd */
|
||||
AM33XX_IOPAD(0x900, PIN_INPUT_PULLUP | MUX_MODE0) /* (G17) mmc0_clk.mmc0_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
emmc_pins: pinmux-emmc-pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x880, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||||
AM33XX_IOPAD(0x884, PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||||
AM33XX_IOPAD(0x800, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
|
||||
AM33XX_IOPAD(0x804, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
|
||||
AM33XX_IOPAD(0x808, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
|
||||
AM33XX_IOPAD(0x80c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
|
||||
AM33XX_IOPAD(0x810, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad4.mmc1_dat4 */
|
||||
AM33XX_IOPAD(0x814, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad5.mmc1_dat5 */
|
||||
AM33XX_IOPAD(0x818, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad6.mmc1_dat6 */
|
||||
AM33XX_IOPAD(0x81c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad7.mmc1_dat7 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_pins>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb_ctrl_mod {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
interrupts-extended = <&intc 18 &tps 0>;
|
||||
interrupt-names = "mc", "vbus";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&cppi41dma {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&i2c2_pins>;
|
||||
status = "okay";
|
||||
clock-frequency = <100000>;
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <4>;
|
||||
phy-mode = "rgmii-txid";
|
||||
};
|
||||
|
||||
&mac {
|
||||
slaves = <1>;
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
bus-width = <0x4>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc1_pins>;
|
||||
cd-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&rtc {
|
||||
clocks = <&clk_32768_ck>, <&l4_per_clkctrl AM3_CLKDIV32K_CLKCTRL 0>;
|
||||
clock-names = "ext-clk", "int-clk";
|
||||
};
|
||||
|
|
@ -0,0 +1,136 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*/
|
||||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include "am335x-bone-common.dtsi"
|
||||
#include "am335x-boneblack-common.dtsi"
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "SanCloud BeagleBone Enhanced";
|
||||
compatible = "sancloud,am335x-boneenhanced", "ti,am335x-bone-black", "ti,am335x-bone", "ti,am33xx";
|
||||
};
|
||||
|
||||
&am33xx_pinmux {
|
||||
pinctrl-names = "default";
|
||||
|
||||
cpsw_default: cpsw_default {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 */
|
||||
AM33XX_IOPAD(0x914, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txen.rgmii1_tctl */
|
||||
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxdv.rgmii1_rctl */
|
||||
AM33XX_IOPAD(0x91c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd3.rgmii1_td3 */
|
||||
AM33XX_IOPAD(0x920, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd2.rgmii1_td2 */
|
||||
AM33XX_IOPAD(0x924, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd1.rgmii1_td1 */
|
||||
AM33XX_IOPAD(0x928, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txd0.rgmii1_td0 */
|
||||
AM33XX_IOPAD(0x92c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mii1_txclk.rgmii1_tclk */
|
||||
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxclk.rgmii1_rclk */
|
||||
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd3.rgmii1_rd3 */
|
||||
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd2.rgmii1_rd2 */
|
||||
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd1.rgmii1_rd1 */
|
||||
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE2) /* mii1_rxd0.rgmii1_rd0 */
|
||||
>;
|
||||
};
|
||||
|
||||
cpsw_sleep: cpsw_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* Slave 1 reset value */
|
||||
AM33XX_IOPAD(0x914, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x918, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x91c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x920, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x924, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x928, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x92c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x930, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x934, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x938, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x93c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x940, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_default: davinci_mdio_default {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO */
|
||||
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
>;
|
||||
};
|
||||
|
||||
davinci_mdio_sleep: davinci_mdio_sleep {
|
||||
pinctrl-single,pins = <
|
||||
/* MDIO reset value */
|
||||
AM33XX_IOPAD(0x948, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
AM33XX_IOPAD(0x94c, PIN_INPUT_PULLDOWN | MUX_MODE7)
|
||||
>;
|
||||
};
|
||||
|
||||
usb_hub_ctrl: usb_hub_ctrl {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x944, PIN_OUTPUT_PULLUP | MUX_MODE7) /* rmii1_refclk.gpio0_29 */
|
||||
>;
|
||||
};
|
||||
|
||||
mpu6050_pins: pinmux_mpu6050_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x968, PIN_INPUT | MUX_MODE7) /* uart0_ctsn.gpio1_8 */
|
||||
>;
|
||||
};
|
||||
|
||||
lps3331ap_pins: pinmux_lps3331ap_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x868, PIN_INPUT | MUX_MODE7) /* gpmc_a10.gpio1_26 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&mac {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&cpsw_default>;
|
||||
pinctrl-1 = <&cpsw_sleep>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&davinci_mdio {
|
||||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "rgmii-txid";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
lps331ap: barometer@5c {
|
||||
compatible = "st,lps331ap-press";
|
||||
st,drdy-int-pin = <1>;
|
||||
reg = <0x5c>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <26 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
|
||||
mpu6050: accelerometer@68 {
|
||||
compatible = "invensense,mpu6050";
|
||||
reg = <0x68>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <2 IRQ_TYPE_EDGE_RISING>;
|
||||
orientation = <0xff 0 0 0 1 0 0 0 0xff>;
|
||||
};
|
||||
|
||||
usb2512b: usb-hub@2c {
|
||||
compatible = "microchip,usb2512b";
|
||||
reg = <0x2c>;
|
||||
reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
|
||||
/* wifi on port 4 */
|
||||
};
|
||||
};
|
||||
|
|
@ -8,6 +8,8 @@
|
|||
/dts-v1/;
|
||||
|
||||
#include "am33xx.dtsi"
|
||||
#include <dt-bindings/pwm/pwm.h>
|
||||
#include <dt-bindings/interrupt-controller/irq.h>
|
||||
|
||||
/ {
|
||||
model = "Toby Churchill SL50 Series";
|
||||
|
|
@ -34,25 +36,25 @@
|
|||
pinctrl-0 = <&led_pins>;
|
||||
|
||||
led0 {
|
||||
label = "sl50:green:usr0";
|
||||
label = "sl50:red:usr0";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "sl50:red:usr1";
|
||||
label = "sl50:green:usr1";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "sl50:green:usr2";
|
||||
label = "sl50:red:usr2";
|
||||
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led3 {
|
||||
label = "sl50:red:usr3";
|
||||
label = "sl50:green:usr3";
|
||||
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
|
@ -60,16 +62,44 @@
|
|||
|
||||
backlight0: disp0 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&ehrpwm1 0 500000 0>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
|
||||
default-brightness-level = <6>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&backlight0_pins>;
|
||||
pwms = <&ehrpwm1 0 500000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
enable-gpios = <&gpio2 4 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vdd_sys_reg>;
|
||||
};
|
||||
|
||||
backlight1: disp1 {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&ehrpwm1 1 500000 0>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 99>;
|
||||
default-brightness-level = <6>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&backlight1_pins>;
|
||||
pwms = <&ehrpwm1 1 500000 PWM_POLARITY_INVERTED>;
|
||||
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
|
||||
10 11 12 13 14 15 16 17 18 19
|
||||
20 21 22 23 24 25 26 27 28 29
|
||||
30 31 32 33 34 35 36 37 38 39
|
||||
40 41 42 43 44 45 46 47 48 49
|
||||
50 51 52 53 54 55 56 57 58 59
|
||||
60 61 62 63 64 65 66 67 68 69
|
||||
70 71 72 73 74 75 76 77 78 79
|
||||
80 81 82 83 84 85 86 87 88 89
|
||||
90 91 92 93 94 95 96 97 98 99
|
||||
100>;
|
||||
default-brightness-level = <50>;
|
||||
enable-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
||||
power-supply = <&vdd_sys_reg>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
|
|
@ -78,27 +108,85 @@
|
|||
#size-cells = <0>;
|
||||
|
||||
/* audio external oscillator */
|
||||
tlv320aic3x_mclk: oscillator@0 {
|
||||
audio_mclk_fixed: oscillator@0 {
|
||||
compatible = "fixed-clock";
|
||||
#clock-cells = <0>;
|
||||
clock-frequency = <24576000>; /* 24.576MHz */
|
||||
};
|
||||
|
||||
audio_mclk: audio_mclk_gate@0 {
|
||||
compatible = "gpio-gate-clock";
|
||||
#clock-cells = <0>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&audio_mclk_pins>;
|
||||
clocks = <&audio_mclk_fixed>;
|
||||
enable-gpios = <&gpio1 27 0>;
|
||||
};
|
||||
};
|
||||
|
||||
panel: lcd_panel {
|
||||
compatible = "ti,tilcdc,panel";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lcd_pins>;
|
||||
|
||||
panel-info {
|
||||
ac-bias = <255>;
|
||||
ac-bias-intrpt = <0>;
|
||||
dma-burst-sz = <16>;
|
||||
bpp = <16>;
|
||||
fdd = <0x80>;
|
||||
tft-alt-mode = <0>;
|
||||
mono-8bit-mode = <0>;
|
||||
sync-edge = <0>;
|
||||
sync-ctrl = <1>;
|
||||
raster-order = <0>;
|
||||
fifo-th = <0>;
|
||||
};
|
||||
|
||||
display-timings {
|
||||
native-mode = <&timing0>;
|
||||
timing0: 960x128 {
|
||||
clock-frequency = <18000000>;
|
||||
hactive = <960>;
|
||||
vactive = <272>;
|
||||
|
||||
hback-porch = <40>;
|
||||
hfront-porch = <16>;
|
||||
hsync-len = <24>;
|
||||
hsync-active = <0>;
|
||||
|
||||
vback-porch = <3>;
|
||||
vfront-porch = <8>;
|
||||
vsync-len = <4>;
|
||||
vsync-active = <0>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
sound {
|
||||
compatible = "ti,da830-evm-audio";
|
||||
ti,model = "AM335x-SL50";
|
||||
ti,audio-codec = <&audio_codec>;
|
||||
ti,mcasp-controller = <&mcasp0>;
|
||||
compatible = "audio-graph-card";
|
||||
label = "sound-card";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&audio_pa_pins>;
|
||||
|
||||
clocks = <&tlv320aic3x_mclk>;
|
||||
clock-names = "mclk";
|
||||
widgets = "Headphone", "Headphone Jack",
|
||||
"Speaker", "Speaker External",
|
||||
"Line", "Line In",
|
||||
"Microphone", "Microphone Jack";
|
||||
|
||||
ti,audio-routing =
|
||||
"Headphone Jack", "HPLOUT",
|
||||
"Headphone Jack", "HPROUT",
|
||||
"LINE1R", "Line In",
|
||||
"LINE1L", "Line In";
|
||||
routing = "Headphone Jack", "HPLOUT",
|
||||
"Headphone Jack", "HPROUT",
|
||||
"Amplifier", "MONO_LOUT",
|
||||
"Speaker External", "Amplifier",
|
||||
"LINE1R", "Line In",
|
||||
"LINE1L", "Line In",
|
||||
"MIC3L", "Microphone Jack",
|
||||
"MIC3R", "Microphone Jack",
|
||||
"Microphone Jack", "Mic Bias";
|
||||
|
||||
dais = <&cpu_port>;
|
||||
|
||||
pa-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
emmc_pwrseq: pwrseq@0 {
|
||||
|
|
@ -108,6 +196,14 @@
|
|||
reset-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
vdd_sys_reg: regulator@0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vdd_sys_reg";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
vmmcsd_fixed: fixedregulator0 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vmmcsd_fixed";
|
||||
|
|
@ -120,6 +216,65 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&lwb_pins>;
|
||||
|
||||
audio_pins: pinmux_audio_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
|
||||
AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
|
||||
AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
|
||||
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
|
||||
AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
|
||||
>;
|
||||
};
|
||||
|
||||
audio_pa_pins: pinmux_audio_pa_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9a0, PIN_INPUT_PULLDOWN | MUX_MODE7) /* SoundPA_en - mcasp0_aclkr.gpio3_18 */
|
||||
>;
|
||||
};
|
||||
|
||||
audio_mclk_pins: pinmux_audio_mclk_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x86c, PIN_INPUT_PULLDOWN | MUX_MODE7) /* gpmc_a11.gpio1_27 */
|
||||
>;
|
||||
};
|
||||
|
||||
backlight0_pins: pinmux_backlight0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x898, PIN_OUTPUT | MUX_MODE7) /* gpmc_wen.gpio2_4 */
|
||||
>;
|
||||
};
|
||||
|
||||
backlight1_pins: pinmux_backlight1_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* gpmc_ad10.gpio0_26 */
|
||||
>;
|
||||
};
|
||||
|
||||
lcd_pins: pinmux_lcd_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x8a0, PIN_OUTPUT | MUX_MODE0) /* lcd_data0.lcd_data0 */
|
||||
AM33XX_IOPAD(0x8a4, PIN_OUTPUT | MUX_MODE0) /* lcd_data1.lcd_data1 */
|
||||
AM33XX_IOPAD(0x8a8, PIN_OUTPUT | MUX_MODE0) /* lcd_data2.lcd_data2 */
|
||||
AM33XX_IOPAD(0x8ac, PIN_OUTPUT | MUX_MODE0) /* lcd_data3.lcd_data3 */
|
||||
AM33XX_IOPAD(0x8b0, PIN_OUTPUT | MUX_MODE0) /* lcd_data4.lcd_data4 */
|
||||
AM33XX_IOPAD(0x8b4, PIN_OUTPUT | MUX_MODE0) /* lcd_data5.lcd_data5 */
|
||||
AM33XX_IOPAD(0x8b8, PIN_OUTPUT | MUX_MODE0) /* lcd_data6.lcd_data6 */
|
||||
AM33XX_IOPAD(0x8bc, PIN_OUTPUT | MUX_MODE0) /* lcd_data7.lcd_data7 */
|
||||
AM33XX_IOPAD(0x8c0, PIN_OUTPUT | MUX_MODE0) /* lcd_data8.lcd_data8 */
|
||||
AM33XX_IOPAD(0x8c4, PIN_OUTPUT | MUX_MODE0) /* lcd_data9.lcd_data9 */
|
||||
AM33XX_IOPAD(0x8c8, PIN_OUTPUT | MUX_MODE0) /* lcd_data10.lcd_data10 */
|
||||
AM33XX_IOPAD(0x8cc, PIN_OUTPUT | MUX_MODE0) /* lcd_data11.lcd_data11 */
|
||||
AM33XX_IOPAD(0x8d0, PIN_OUTPUT | MUX_MODE0) /* lcd_data12.lcd_data12 */
|
||||
AM33XX_IOPAD(0x8d4, PIN_OUTPUT | MUX_MODE0) /* lcd_data13.lcd_data13 */
|
||||
AM33XX_IOPAD(0x8d8, PIN_OUTPUT | MUX_MODE0) /* lcd_data14.lcd_data14 */
|
||||
AM33XX_IOPAD(0x8dc, PIN_OUTPUT | MUX_MODE0) /* lcd_data15.lcd_data15 */
|
||||
AM33XX_IOPAD(0x8e0, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_vsync.lcd_vsync */
|
||||
AM33XX_IOPAD(0x8e4, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_hsync.lcd_hsync */
|
||||
AM33XX_IOPAD(0x8e8, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_pclk.lcd_pclk */
|
||||
AM33XX_IOPAD(0x8ec, PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* lcd_ac_bias_en.lcd_ac_bias_en */
|
||||
>;
|
||||
};
|
||||
|
||||
led_pins: pinmux_led_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x854, PIN_OUTPUT | MUX_MODE7) /* gpmc_a5.gpio1_21 */
|
||||
|
|
@ -207,6 +362,8 @@
|
|||
/* MDIO */
|
||||
AM33XX_IOPAD(0x948, PIN_INPUT_PULLUP | SLEWCTRL_FAST | MUX_MODE0) /* mdio_data.mdio_data */
|
||||
AM33XX_IOPAD(0x94c, PIN_OUTPUT_PULLUP | MUX_MODE0) /* mdio_clk.mdio_clk */
|
||||
/* Ethernet */
|
||||
AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* Ethernet_nRST - gpmc_ad14.gpio1_14 */
|
||||
>;
|
||||
};
|
||||
|
||||
|
|
@ -245,16 +402,6 @@
|
|||
>;
|
||||
};
|
||||
|
||||
audio_pins: pinmux_audio_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9ac, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_ahcklx.mcasp0_ahclkx */
|
||||
AM33XX_IOPAD(0x994, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_fsx.mcasp0_fsx */
|
||||
AM33XX_IOPAD(0x990, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_aclkx.mcasp0_aclkx */
|
||||
AM33XX_IOPAD(0x998, PIN_INPUT_PULLDOWN | MUX_MODE0) /* mcasp0_axr0.mcasp0_axr0 */
|
||||
AM33XX_IOPAD(0x99c, PIN_OUTPUT_PULLDOWN | MUX_MODE2) /* mcasp0_ahclkr.mcasp0_axr2 */
|
||||
>;
|
||||
};
|
||||
|
||||
ehrpwm1_pins: pinmux_ehrpwm1a_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x848, PIN_OUTPUT | MUX_MODE6) /* gpmc_a2.ehrpwm1a */
|
||||
|
|
@ -262,6 +409,12 @@
|
|||
>;
|
||||
};
|
||||
|
||||
rtc0_irq_pins: pinmux_rtc0_irq_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x824, PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_ad9.gpio0_23 */
|
||||
>;
|
||||
};
|
||||
|
||||
spi0_pins: pinmux_spi0_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x954, PIN_INPUT_PULLUP | MUX_MODE0) /* SPI0_MOSI - spi0_d0.spi0_d0 */
|
||||
|
|
@ -274,15 +427,18 @@
|
|||
|
||||
lwb_pins: pinmux_lwb_pins {
|
||||
pinctrl-single,pins = <
|
||||
AM33XX_IOPAD(0x9a4, PIN_OUTPUT | MUX_MODE7) /* SoundPA_en - mcasp0_fsr.gpio3_19 */
|
||||
AM33XX_IOPAD(0x828, PIN_OUTPUT | MUX_MODE7) /* nKbdOnC - gpmc_ad10.gpio0_26 */
|
||||
AM33XX_IOPAD(0x830, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdInt - gpmc_ad12.gpio1_12 */
|
||||
AM33XX_IOPAD(0x834, PIN_INPUT_PULLUP | MUX_MODE7) /* nKbdReset - gpmc_ad13.gpio1_13 */
|
||||
AM33XX_IOPAD(0x838, PIN_INPUT_PULLUP | MUX_MODE7) /* nDispReset - gpmc_ad14.gpio1_14 */
|
||||
AM33XX_IOPAD(0x844, PIN_INPUT_PULLUP | MUX_MODE7) /* USB1_enPower - gpmc_a1.gpio1_17 */
|
||||
/* PDI Bus - Battery system */
|
||||
AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
|
||||
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
|
||||
/* FPGA */
|
||||
AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
|
||||
AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
|
||||
AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
|
||||
AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
|
||||
AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
@ -298,9 +454,14 @@
|
|||
reg = <0x24>;
|
||||
};
|
||||
|
||||
bq32000: rtc@68 {
|
||||
compatible = "ti,bq32000";
|
||||
trickle-resistor-ohms = <1120>;
|
||||
rtc0: rtc@68 {
|
||||
compatible = "dallas,ds1339";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&rtc0_irq_pins>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <23 IRQ_TYPE_EDGE_FALLING>; /* gpio 23 */
|
||||
wakeup-source;
|
||||
trickle-resistor-ohms = <2000>;
|
||||
reg = <0x68>;
|
||||
};
|
||||
|
||||
|
|
@ -326,12 +487,21 @@
|
|||
audio_codec: tlv320aic3106@1b {
|
||||
status = "okay";
|
||||
compatible = "ti,tlv320aic3106";
|
||||
#sound-dai-cells = <0>;
|
||||
reg = <0x1b>;
|
||||
ai3x-micbias-vg = <2>; /* 2.5V */
|
||||
|
||||
AVDD-supply = <&ldo4_reg>;
|
||||
IOVDD-supply = <&ldo4_reg>;
|
||||
DRVDD-supply = <&ldo4_reg>;
|
||||
DVDD-supply = <&ldo3_reg>;
|
||||
|
||||
codec_port: port {
|
||||
codec_endpoint: endpoint {
|
||||
remote-endpoint = <&cpu_endpoint>;
|
||||
clocks = <&audio_mclk>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
/* Ambient Light Sensor */
|
||||
|
|
@ -363,7 +533,7 @@
|
|||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
dr_mode = "peripheral";
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
|
|
@ -397,17 +567,27 @@
|
|||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&audio_pins>;
|
||||
|
||||
#sound-dai-cells = <0>;
|
||||
op-mode = <0>; /* MCASP_ISS_MODE */
|
||||
tdm-slots = <2>;
|
||||
serial-dir = <
|
||||
2 0 1 0
|
||||
0 0 0 0
|
||||
0 0 0 0
|
||||
0 0 0 0
|
||||
/* 4 serializers */
|
||||
serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
|
||||
0 0 1 2
|
||||
>;
|
||||
tx-num-evt = <1>;
|
||||
rx-num-evt = <1>;
|
||||
tx-num-evt = <32>;
|
||||
rx-num-evt = <32>;
|
||||
|
||||
cpu_port: port {
|
||||
cpu_endpoint: endpoint {
|
||||
remote-endpoint = <&codec_endpoint>;
|
||||
|
||||
dai-format = "dsp_b";
|
||||
bitclock-master = <&codec_port>;
|
||||
frame-master = <&codec_port>;
|
||||
bitclock-inversion;
|
||||
clocks = <&audio_mclk>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
@ -507,13 +687,8 @@
|
|||
};
|
||||
|
||||
&cpsw_emac0 {
|
||||
phy_id = <&davinci_mdio>, <0>;
|
||||
phy-mode = "mii";
|
||||
};
|
||||
|
||||
&cpsw_emac1 {
|
||||
phy_id = <&davinci_mdio>, <1>;
|
||||
phy-mode = "mii";
|
||||
phy-handle = <ðphy0>;
|
||||
};
|
||||
|
||||
&mac {
|
||||
|
|
@ -528,6 +703,12 @@
|
|||
pinctrl-names = "default", "sleep";
|
||||
pinctrl-0 = <&davinci_mdio_default>;
|
||||
pinctrl-1 = <&davinci_mdio_sleep>;
|
||||
reset-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>;
|
||||
reset-delay-us = <100>; /* PHY datasheet states 100us min */
|
||||
|
||||
ethphy0: ethernet-phy@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&sham {
|
||||
|
|
@ -547,3 +728,15 @@
|
|||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&ehrpwm1_pins>;
|
||||
};
|
||||
|
||||
&lcdc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&tscadc {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&am335x_adc {
|
||||
ti,adc-channels = <0 1 2 3 4 5 6 7>;
|
||||
};
|
||||
|
|
|
|||
|
|
@ -29,8 +29,8 @@
|
|||
serial3 = &uart3;
|
||||
serial4 = &uart4;
|
||||
serial5 = &uart5;
|
||||
d_can0 = &dcan0;
|
||||
d_can1 = &dcan1;
|
||||
d-can0 = &dcan0;
|
||||
d-can1 = &dcan1;
|
||||
usb0 = &usb0;
|
||||
usb1 = &usb1;
|
||||
phy0 = &usb0_phy;
|
||||
|
|
|
|||
|
|
@ -127,6 +127,7 @@
|
|||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
enable-gpios = <&gpio6 16 GPIO_ACTIVE_HIGH>; /* gpio176, lcd INI */
|
||||
vcc-supply = <&vdd_io_reg>;
|
||||
|
||||
port {
|
||||
lcd_in: endpoint {
|
||||
|
|
@ -154,6 +155,7 @@
|
|||
bl: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pinctrl-names = "default";
|
||||
power-supply = <&vdd_io_reg>;
|
||||
pinctrl-0 = <&backlight_pins>;
|
||||
pwms = <&pwm11 0 5000000 0>;
|
||||
brightness-levels = <0 10 20 30 40 50 60 70 80 90 100>;
|
||||
|
|
@ -168,6 +170,13 @@
|
|||
ti,timers = <&timer11>;
|
||||
#pwm-cells = <3>;
|
||||
};
|
||||
|
||||
/* HS USB Host PHY on PORT 1 */
|
||||
hsusb1_phy: hsusb1_phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
reset-gpios = <&gpio2 25 GPIO_ACTIVE_LOW>; /* gpio_57 */
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&davinci_emac {
|
||||
|
|
@ -203,6 +212,7 @@
|
|||
reg = <0x21>;
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
vcc-supply = <&vdd_io_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -220,15 +230,21 @@
|
|||
cd-gpios = <&gpio4 31 GPIO_ACTIVE_HIGH>; /* gpio_127 */
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&mmc3 {
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
&usbhshost {
|
||||
port1-mode = "ehci-phy";
|
||||
};
|
||||
|
||||
&usbhsehci {
|
||||
phys = <&hsusb1_phy>;
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hsusb1_rst_pins>;
|
||||
|
||||
leds_pins: pinmux_leds_pins {
|
||||
pinctrl-single,pins = <
|
||||
|
|
@ -287,4 +303,32 @@
|
|||
OMAP3_CORE1_IOPAD(0x20fa, PIN_OUTPUT | MUX_MODE0) /* dss_data15.dss_data15 */
|
||||
>;
|
||||
};
|
||||
|
||||
hsusb1_rst_pins: pinmux_hsusb1_rst_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20ba, PIN_OUTPUT | MUX_MODE4) /* gpmc_ncs6.gpio_57 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&hsusb1_pins>;
|
||||
|
||||
hsusb1_pins: pinmux_hsusb1_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3430_CORE2_IOPAD(0x25d8, PIN_OUTPUT | MUX_MODE3) /* etk_clk.hsusb1_stp */
|
||||
OMAP3430_CORE2_IOPAD(0x25da, PIN_OUTPUT | MUX_MODE3) /* etk_ctl.hsusb1_clk */
|
||||
OMAP3430_CORE2_IOPAD(0x25ec, PIN_INPUT | MUX_MODE3) /* etk_d8.hsusb1_dir */
|
||||
OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE3) /* etk_d9.hsusb1_nxt */
|
||||
OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE3) /* etk_d0.hsusb1_data0 */
|
||||
OMAP3430_CORE2_IOPAD(0x25de, PIN_INPUT | MUX_MODE3) /* etk_d1.hsusb1_data1 */
|
||||
OMAP3430_CORE2_IOPAD(0x25e0, PIN_INPUT | MUX_MODE3) /* etk_d2.hsusb1_data2 */
|
||||
OMAP3430_CORE2_IOPAD(0x25ea, PIN_INPUT | MUX_MODE3) /* etk_d7.hsusb1_data3 */
|
||||
OMAP3430_CORE2_IOPAD(0x25e4, PIN_INPUT | MUX_MODE3) /* etk_d4.hsusb1_data4 */
|
||||
OMAP3430_CORE2_IOPAD(0x25e6, PIN_INPUT | MUX_MODE3) /* etk_d5.hsusb1_data5 */
|
||||
OMAP3430_CORE2_IOPAD(0x25e8, PIN_INPUT | MUX_MODE3) /* etk_d6.hsusb1_data6 */
|
||||
OMAP3430_CORE2_IOPAD(0x25e2, PIN_INPUT | MUX_MODE3) /* etk_d3.hsusb1_data7 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -14,6 +14,32 @@
|
|||
cpu0-supply = <&vdd_core_reg>;
|
||||
};
|
||||
};
|
||||
|
||||
wl12xx_buffer: wl12xx_buf {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "wl1271_buf";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_buffer_pins>;
|
||||
gpio = <&gpio5 1 GPIO_ACTIVE_LOW>; /* gpio 129 */
|
||||
regulator-always-on;
|
||||
vin-supply = <&vdd_1v8_reg>;
|
||||
};
|
||||
|
||||
wl12xx_vmmc2: wl12xx_vmmc2 {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwl1271";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_wkup_pins>;
|
||||
gpio = <&gpio1 3 GPIO_ACTIVE_HIGH >; /* gpio 3 */
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
regulator-always-on;
|
||||
vin-supply = <&wl12xx_buffer>;
|
||||
};
|
||||
};
|
||||
|
||||
&gpmc {
|
||||
|
|
@ -64,7 +90,6 @@
|
|||
regulators {
|
||||
vdd_core_reg: VDCDC1 {
|
||||
regulator-name = "vdd_core";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1200000>;
|
||||
regulator-max-microvolt = <1200000>;
|
||||
|
|
@ -72,7 +97,6 @@
|
|||
|
||||
vdd_io_reg: VDCDC2 {
|
||||
regulator-name = "vdd_io";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
|
@ -80,7 +104,6 @@
|
|||
|
||||
vdd_1v8_reg: VDCDC3 {
|
||||
regulator-name = "vdd_1v8";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
|
@ -88,7 +111,6 @@
|
|||
|
||||
vdd_usb18_reg: LDO1 {
|
||||
regulator-name = "vdd_usb18";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
|
|
@ -96,7 +118,6 @@
|
|||
|
||||
vdd_usb33_reg: LDO2 {
|
||||
regulator-name = "vdd_usb33";
|
||||
compatible = "regulator-fixed";
|
||||
regulator-always-on;
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
|
|
@ -126,8 +147,63 @@
|
|||
};
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
interrupts-extended = <&intc 86 /* &omap3_pmx_core 0x12c */>;
|
||||
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
vmmc-supply = <&wl12xx_vmmc2>;
|
||||
non-removable;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
wlcore: wlcore@2 {
|
||||
compatible = "ti,wl1271";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio6>;
|
||||
interrupts = <10 IRQ_TYPE_LEVEL_HIGH>; /* gpio_170 */
|
||||
ref-clock-frequency = <26000000>;
|
||||
tcxo-clock-frequency = <26000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart2_pins>;
|
||||
|
||||
bluetooth {
|
||||
compatible = "ti,wl1271-st";
|
||||
enable-gpios = <&gpio2 24 GPIO_ACTIVE_HIGH>; /* gpio 56 */
|
||||
max-speed = <3000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_core {
|
||||
|
||||
wl12xx_buffer_pins: pinmux_wl12xx_buffer_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2156, PIN_OUTPUT | MUX_MODE4) /* mmc1_dat7.gpio_129 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2158, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_clk.mmc2_clk */
|
||||
OMAP3_CORE1_IOPAD(0x215a, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_cmd.mmc2_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x215c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat0.mmc2_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x215e, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat1.mmc2_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2160, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat2.mmc2_dat2 */
|
||||
OMAP3_CORE1_IOPAD(0x2162, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc2_dat3.mmc2_dat3 */
|
||||
OMAP3_CORE1_IOPAD(0x2164, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat4.mmc2_dir_dat0 */
|
||||
OMAP3_CORE1_IOPAD(0x2166, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat5.mmc2_dir_dat1 */
|
||||
OMAP3_CORE1_IOPAD(0x2168, PIN_OUTPUT | MUX_MODE1) /* mmc2_dat6.mmc2_dir_cmd */
|
||||
OMAP3_CORE1_IOPAD(0x216a, PIN_INPUT | MUX_MODE1) /* mmc2_dat7.mmc2_clkin */
|
||||
OMAP3_CORE1_IOPAD(0x21c6, PIN_INPUT_PULLUP | MUX_MODE4) /* hdq_sio.gpio_170 */
|
||||
>;
|
||||
};
|
||||
|
||||
rtc_pins: pinmux_rtc_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x20b6, PIN_INPUT_PULLUP | MUX_MODE4) /* gpmc_ncs4.gpio_55 */
|
||||
|
|
@ -139,4 +215,23 @@
|
|||
OMAP3_CORE1_IOPAD(0x20d2, PIN_INPUT | MUX_MODE4) /* gpmc_wait3.gpio_65 */
|
||||
>;
|
||||
};
|
||||
|
||||
uart2_pins: pinmux_uart2_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_CORE1_IOPAD(0x2174, PIN_INPUT_PULLUP | MUX_MODE0) /* uart2_cts */
|
||||
OMAP3_CORE1_IOPAD(0x2176, PIN_OUTPUT_PULLUP | MUX_MODE0) /* uart2_rts */
|
||||
OMAP3_CORE1_IOPAD(0x2178, PIN_OUTPUT | MUX_MODE0) /* uart2_tx */
|
||||
OMAP3_CORE1_IOPAD(0x217a, PIN_INPUT | MUX_MODE0) /* uart2_rx */
|
||||
OMAP3_CORE1_IOPAD(0x20b8, PIN_INPUT | MUX_MODE0) /* gpio_56 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&omap3_pmx_wkup {
|
||||
|
||||
wl12xx_wkup_pins: pinmux_wl12xx_wkup_pins {
|
||||
pinctrl-single,pins = <
|
||||
OMAP3_WKUP_IOPAD(0x2a0c, PIN_OUTPUT | MUX_MODE4) /* sys_boot1.gpio_3 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
|
|
|||
|
|
@ -790,7 +790,7 @@
|
|||
compatible = "ti,wl1835";
|
||||
reg = <2>;
|
||||
interrupt-parent = <&gpio1>;
|
||||
interrupts = <23 IRQ_TYPE_LEVEL_HIGH>;
|
||||
interrupts = <23 IRQ_TYPE_EDGE_RISING>;
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -66,10 +66,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&extcon_usb2 {
|
||||
id-gpio = <&gpio5 7 GPIO_ACTIVE_HIGH>;
|
||||
vbus-gpio = <&gpio7 22 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
|||
|
|
@ -57,10 +57,6 @@
|
|||
};
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&extcon_usb2 {
|
||||
id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
|
||||
vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
|
||||
|
|
|
|||
|
|
@ -395,8 +395,13 @@
|
|||
dr_mode = "host";
|
||||
};
|
||||
|
||||
&omap_dwc3_2 {
|
||||
extcon = <&extcon_usb2>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
dr_mode = "peripheral";
|
||||
extcon = <&extcon_usb2>;
|
||||
dr_mode = "otg";
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
|
|
|
|||
|
|
@ -3,11 +3,6 @@
|
|||
* Device Tree file for SolidRun Clearfog Base revision A1 rev 2.0 (88F6828)
|
||||
*
|
||||
* Copyright (C) 2015 Russell King
|
||||
*
|
||||
* This board is in development; the contents of this file work with
|
||||
* the A1 rev 2.0 of the board, which does not represent final
|
||||
* production board. Things will change, don't expect this file to
|
||||
* remain compatible info the future.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
|
|
|||
|
|
@ -3,11 +3,6 @@
|
|||
* Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
|
||||
*
|
||||
* Copyright (C) 2015 Russell King
|
||||
*
|
||||
* This board is in development; the contents of this file work with
|
||||
* the A1 rev 2.0 of the board, which does not represent final
|
||||
* production board. Things will change, don't expect this file to
|
||||
* remain compatible info the future.
|
||||
*/
|
||||
#include "armada-388-clearfog.dts"
|
||||
|
||||
|
|
|
|||
|
|
@ -3,11 +3,6 @@
|
|||
* Device Tree file for SolidRun Clearfog Pro revision A1 rev 2.0 (88F6828)
|
||||
*
|
||||
* Copyright (C) 2015 Russell King
|
||||
*
|
||||
* This board is in development; the contents of this file work with
|
||||
* the A1 rev 2.0 of the board, which does not represent final
|
||||
* production board. Things will change, don't expect this file to
|
||||
* remain compatible info the future.
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
|
|
@ -235,7 +230,7 @@
|
|||
&spi1 {
|
||||
/*
|
||||
* Add SPI CS pins for clearfog:
|
||||
* CS0: W25Q32 (not populated on uSOM)
|
||||
* CS0: W25Q32
|
||||
* CS1:
|
||||
* CS2: mikrobus
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -3,11 +3,6 @@
|
|||
* Device Tree include file for SolidRun Clearfog 88F6828 based boards
|
||||
*
|
||||
* Copyright (C) 2015 Russell King
|
||||
*
|
||||
* This board is in development; the contents of this file work with
|
||||
* the A1 rev 2.0 of the board, which does not represent final
|
||||
* production board. Things will change, don't expect this file to
|
||||
* remain compatible info the future.
|
||||
*/
|
||||
|
||||
#include "armada-388.dtsi"
|
||||
|
|
@ -230,7 +225,7 @@
|
|||
&spi1 {
|
||||
/*
|
||||
* Add SPI CS pins for clearfog:
|
||||
* CS0: W25Q32 (not populated on uSOM)
|
||||
* CS0: W25Q32
|
||||
* CS1: PIC microcontroller (Pro models)
|
||||
* CS2: mikrobus
|
||||
*/
|
||||
|
|
|
|||
|
|
@ -0,0 +1,313 @@
|
|||
// SPDX-License-Identifier: (GPL-2.0 OR MIT)
|
||||
/*
|
||||
* Device Tree file for Helios4
|
||||
* based on SolidRun Clearfog revision A1 rev 2.0 (88F6828)
|
||||
*
|
||||
* Copyright (C) 2017 Aditya Prayoga <aditya@kobol.io>
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "armada-388.dtsi"
|
||||
#include "armada-38x-solidrun-microsom.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Helios4";
|
||||
compatible = "kobol,helios4", "marvell,armada388",
|
||||
"marvell,armada385", "marvell,armada380";
|
||||
|
||||
memory {
|
||||
device_type = "memory";
|
||||
reg = <0x00000000 0x80000000>; /* 2 GB */
|
||||
};
|
||||
|
||||
aliases {
|
||||
/* So that mvebu u-boot can update the MAC addresses */
|
||||
ethernet1 = ð0;
|
||||
};
|
||||
|
||||
chosen {
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
reg_12v: regulator-12v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "power_brick_12V";
|
||||
regulator-min-microvolt = <12000000>;
|
||||
regulator-max-microvolt = <12000000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_3p3v: regulator-3p3v {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3P3V";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_12v>;
|
||||
};
|
||||
|
||||
reg_5p0v_hdd: regulator-5v-hdd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "5V_HDD";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-always-on;
|
||||
vin-supply = <®_12v>;
|
||||
};
|
||||
|
||||
reg_5p0v_usb: regulator-5v-usb {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "USB-PWR";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
enable-active-high;
|
||||
gpio = <&expander0 6 GPIO_ACTIVE_HIGH>;
|
||||
vin-supply = <®_12v>;
|
||||
};
|
||||
|
||||
system-leds {
|
||||
compatible = "gpio-leds";
|
||||
status-led {
|
||||
label = "helios4:green:status";
|
||||
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "heartbeat";
|
||||
default-state = "on";
|
||||
};
|
||||
|
||||
fault-led {
|
||||
label = "helios4:red:fault";
|
||||
gpios = <&gpio0 25 GPIO_ACTIVE_LOW>;
|
||||
default-state = "keep";
|
||||
};
|
||||
};
|
||||
|
||||
io-leds {
|
||||
compatible = "gpio-leds";
|
||||
sata1-led {
|
||||
label = "helios4:green:ata1";
|
||||
gpios = <&gpio1 17 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "ata1";
|
||||
default-state = "off";
|
||||
};
|
||||
sata2-led {
|
||||
label = "helios4:green:ata2";
|
||||
gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "ata2";
|
||||
default-state = "off";
|
||||
};
|
||||
sata3-led {
|
||||
label = "helios4:green:ata3";
|
||||
gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "ata3";
|
||||
default-state = "off";
|
||||
};
|
||||
sata4-led {
|
||||
label = "helios4:green:ata4";
|
||||
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "ata4";
|
||||
default-state = "off";
|
||||
};
|
||||
usb-led {
|
||||
label = "helios4:green:usb";
|
||||
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
|
||||
linux,default-trigger = "usb-host";
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
|
||||
fan1: j10-pwm {
|
||||
compatible = "pwm-fan";
|
||||
pwms = <&gpio1 9 40000>; /* Target freq:25 kHz */
|
||||
};
|
||||
|
||||
fan2: j17-pwm {
|
||||
compatible = "pwm-fan";
|
||||
pwms = <&gpio1 23 40000>; /* Target freq:25 kHz */
|
||||
};
|
||||
|
||||
usb2_phy: usb2-phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
vbus-regulator = <®_5p0v_usb>;
|
||||
};
|
||||
|
||||
usb3_phy: usb3-phy {
|
||||
compatible = "usb-nop-xceiv";
|
||||
};
|
||||
|
||||
soc {
|
||||
internal-regs {
|
||||
i2c@11000 {
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&i2c0_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
/*
|
||||
* PCA9655 GPIO expander, up to 1MHz clock.
|
||||
* 0-Board Revision bit 0 #
|
||||
* 1-Board Revision bit 1 #
|
||||
* 5-USB3 overcurrent
|
||||
* 6-USB3 power
|
||||
*/
|
||||
expander0: gpio-expander@20 {
|
||||
/*
|
||||
* This is how it should be:
|
||||
* compatible = "onnn,pca9655",
|
||||
* "nxp,pca9555";
|
||||
* but you can't do this because of
|
||||
* the way I2C works.
|
||||
*/
|
||||
compatible = "nxp,pca9555";
|
||||
gpio-controller;
|
||||
#gpio-cells = <2>;
|
||||
reg = <0x20>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pca0_pins>;
|
||||
interrupt-parent = <&gpio0>;
|
||||
interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
|
||||
interrupt-controller;
|
||||
#interrupt-cells = <2>;
|
||||
|
||||
board_rev_bit_0 {
|
||||
gpio-hog;
|
||||
gpios = <0 GPIO_ACTIVE_LOW>;
|
||||
input;
|
||||
line-name = "board-rev-0";
|
||||
};
|
||||
board_rev_bit_1 {
|
||||
gpio-hog;
|
||||
gpios = <1 GPIO_ACTIVE_LOW>;
|
||||
input;
|
||||
line-name = "board-rev-1";
|
||||
};
|
||||
usb3_ilimit {
|
||||
gpio-hog;
|
||||
gpios = <5 GPIO_ACTIVE_HIGH>;
|
||||
input;
|
||||
line-name = "usb-overcurrent-status";
|
||||
};
|
||||
};
|
||||
|
||||
temp_sensor: temp@4c {
|
||||
compatible = "ti,lm75";
|
||||
reg = <0x4c>;
|
||||
vcc-supply = <®_3p3v>;
|
||||
};
|
||||
};
|
||||
|
||||
i2c@11100 {
|
||||
/*
|
||||
* External I2C Bus for user peripheral
|
||||
*/
|
||||
clock-frequency = <400000>;
|
||||
pinctrl-0 = <&helios_i2c1_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sata@a8000 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sata0: sata-port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
sata1: sata-port@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
sata@e0000 {
|
||||
status = "okay";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
sata2: sata-port@0 {
|
||||
reg = <0>;
|
||||
};
|
||||
|
||||
sata3: sata-port@1 {
|
||||
reg = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
spi@10680 {
|
||||
pinctrl-0 = <&spi1_pins
|
||||
µsom_spi1_cs_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
sdhci@d8000 {
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&gpio0 20 GPIO_ACTIVE_LOW>;
|
||||
no-1-8-v;
|
||||
pinctrl-0 = <&helios_sdhci_pins
|
||||
&helios_sdhci_cd_pins>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
vmmc = <®_3p3v>;
|
||||
wp-inverted;
|
||||
};
|
||||
|
||||
usb@58000 {
|
||||
usb-phy = <&usb2_phy>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f0000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
usb3@f8000 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
pinctrl@18000 {
|
||||
pca0_pins: pca0-pins {
|
||||
marvell,pins = "mpp23";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
microsom_phy0_int_pins: microsom-phy0-int-pins {
|
||||
marvell,pins = "mpp18";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
helios_i2c1_pins: i2c1-pins {
|
||||
marvell,pins = "mpp26", "mpp27";
|
||||
marvell,function = "i2c1";
|
||||
};
|
||||
helios_sdhci_cd_pins: helios-sdhci-cd-pins {
|
||||
marvell,pins = "mpp20";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
helios_sdhci_pins: helios-sdhci-pins {
|
||||
marvell,pins = "mpp21", "mpp28",
|
||||
"mpp37", "mpp38",
|
||||
"mpp39", "mpp40";
|
||||
marvell,function = "sd0";
|
||||
};
|
||||
helios_led_pins: helios-led-pins {
|
||||
marvell,pins = "mpp24", "mpp25",
|
||||
"mpp49", "mpp50",
|
||||
"mpp52", "mpp53",
|
||||
"mpp54";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
helios_fan_pins: helios-fan-pins {
|
||||
marvell,pins = "mpp41", "mpp43",
|
||||
"mpp48", "mpp55";
|
||||
marvell,function = "gpio";
|
||||
};
|
||||
microsom_spi1_cs_pins: spi1-cs-pins {
|
||||
marvell,pins = "mpp59";
|
||||
marvell,function = "spi1";
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -3,11 +3,6 @@
|
|||
* Device Tree file for SolidRun Armada 38x Microsom
|
||||
*
|
||||
* Copyright (C) 2015 Russell King
|
||||
*
|
||||
* This board is in development; the contents of this file work with
|
||||
* the A1 rev 2.0 of the board, which does not represent final
|
||||
* production board. Things will change, don't expect this file to
|
||||
* remain compatible info the future.
|
||||
*/
|
||||
#include <dt-bindings/input/input.h>
|
||||
#include <dt-bindings/gpio/gpio.h>
|
||||
|
|
@ -99,7 +94,6 @@
|
|||
compatible = "w25q32", "jedec,spi-nor";
|
||||
reg = <0>; /* Chip select 0 */
|
||||
spi-max-frequency = <3000000>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -80,20 +80,20 @@
|
|||
};
|
||||
};
|
||||
|
||||
&ehci0 {
|
||||
/*
|
||||
* Enable port A as device (via the virtual hub) and port B as
|
||||
* host by default on the eval board. This can be easily changed
|
||||
* by replacing the override below with &ehci0 { ... } to enable
|
||||
* host on both ports.
|
||||
*/
|
||||
&vhub {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2ah_default>;
|
||||
};
|
||||
|
||||
&ehci1 {
|
||||
status = "okay";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2bh_default>;
|
||||
};
|
||||
|
||||
&uhci {
|
||||
status = "okay";
|
||||
|
||||
/* No pinctrl, this follows the above EHCI settings */
|
||||
};
|
||||
|
|
|
|||
|
|
@ -21,9 +21,9 @@
|
|||
#size-cells = <1>;
|
||||
ranges;
|
||||
|
||||
vga_memory: framebuffer@bf000000 {
|
||||
vga_memory: framebuffer@9f000000 {
|
||||
no-map;
|
||||
reg = <0xbf000000 0x01000000>; /* 16M */
|
||||
reg = <0x9f000000 0x01000000>; /* 16M */
|
||||
};
|
||||
|
||||
flash_memory: region@98000000 {
|
||||
|
|
|
|||
|
|
@ -92,6 +92,12 @@
|
|||
reg = <0x1e6c0080 0x80>;
|
||||
};
|
||||
|
||||
cvic: copro-interrupt-controller@1e6c2000 {
|
||||
compatible = "aspeed,ast2400-cvic", "aspeed-cvic";
|
||||
valid-sources = <0x7fffffff>;
|
||||
reg = <0x1e6c2000 0x80>;
|
||||
};
|
||||
|
||||
mac0: ethernet@1e660000 {
|
||||
compatible = "aspeed,ast2400-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e660000 0x180>;
|
||||
|
|
@ -113,6 +119,8 @@
|
|||
reg = <0x1e6a1000 0x100>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2h_default>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -123,6 +131,20 @@
|
|||
#ports = <3>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
|
||||
status = "disabled";
|
||||
/*
|
||||
* No default pinmux, it will follow EHCI, use an explicit pinmux
|
||||
* override if you don't enable EHCI
|
||||
*/
|
||||
};
|
||||
|
||||
vhub: usb-vhub@1e6a0000 {
|
||||
compatible = "aspeed,ast2400-usb-vhub";
|
||||
reg = <0x1e6a0000 0x300>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2d_default>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
|
|
@ -161,7 +183,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
sram@1e720000 {
|
||||
sram: sram@1e720000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x1e720000 0x8000>; // 32K
|
||||
};
|
||||
|
|
@ -224,7 +246,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1e786000 0x1000>;
|
||||
clocks = <&syscon ASPEED_CLK_APB>;
|
||||
clocks = <&syscon ASPEED_CLK_24M>;
|
||||
resets = <&syscon ASPEED_RESET_PWM>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -127,6 +127,13 @@
|
|||
reg = <0x1e6c0080 0x80>;
|
||||
};
|
||||
|
||||
cvic: copro-interrupt-controller@1e6c2000 {
|
||||
compatible = "aspeed,ast2500-cvic", "aspeed-cvic";
|
||||
valid-sources = <0xffffffff>;
|
||||
copro-sw-interrupts = <1>;
|
||||
reg = <0x1e6c2000 0x80>;
|
||||
};
|
||||
|
||||
mac0: ethernet@1e660000 {
|
||||
compatible = "aspeed,ast2500-mac", "faraday,ftgmac100";
|
||||
reg = <0x1e660000 0x180>;
|
||||
|
|
@ -148,6 +155,8 @@
|
|||
reg = <0x1e6a1000 0x100>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2ah_default>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -156,6 +165,8 @@
|
|||
reg = <0x1e6a3000 0x100>;
|
||||
interrupts = <13>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT2CLK>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2bh_default>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
|
|
@ -166,6 +177,20 @@
|
|||
#ports = <2>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBUHCICLK>;
|
||||
status = "disabled";
|
||||
/*
|
||||
* No default pinmux, it will follow EHCI, use an explicit pinmux
|
||||
* override if you don't enable EHCI
|
||||
*/
|
||||
};
|
||||
|
||||
vhub: usb-vhub@1e6a0000 {
|
||||
compatible = "aspeed,ast2500-usb-vhub";
|
||||
reg = <0x1e6a0000 0x300>;
|
||||
interrupts = <5>;
|
||||
clocks = <&syscon ASPEED_CLK_GATE_USBPORT1CLK>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb2ad_default>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
apb {
|
||||
|
|
@ -211,7 +236,7 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
sram@1e720000 {
|
||||
sram: sram@1e720000 {
|
||||
compatible = "mmio-sram";
|
||||
reg = <0x1e720000 0x9000>; // 36K
|
||||
};
|
||||
|
|
@ -281,7 +306,7 @@
|
|||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1e786000 0x1000>;
|
||||
clocks = <&syscon ASPEED_CLK_APB>;
|
||||
clocks = <&syscon ASPEED_CLK_24M>;
|
||||
resets = <&syscon ASPEED_RESET_PWM>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
|
@ -1417,6 +1442,11 @@
|
|||
groups = "USB2AH";
|
||||
};
|
||||
|
||||
pinctrl_usb2ad_default: usb2ad_default {
|
||||
function = "USB2AD";
|
||||
groups = "USB2AD";
|
||||
};
|
||||
|
||||
pinctrl_usb11bhid_default: usb11bhid_default {
|
||||
function = "USB11BHID";
|
||||
groups = "USB11BHID";
|
||||
|
|
|
|||
|
|
@ -0,0 +1,95 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-dvk_som60.dts - Device Tree file for the DVK SOM60 board
|
||||
*
|
||||
* Copyright (C) 2018 Laird,
|
||||
* 2018 Ben Whitten <ben.whitten@lairdtech.com>
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "at91-som60.dtsi"
|
||||
#include "at91-dvk_su60_somc.dtsi"
|
||||
#include "at91-dvk_su60_somc_lcm.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird DVK SOM60";
|
||||
compatible = "laird,dvk-som60", "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
stdout-path = &dbgu;
|
||||
tick-timer = &pit;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&ssc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pit {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,159 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-dvk_su60_somc.dtsi - Device Tree file for the DVK SOM60 base board
|
||||
*
|
||||
* Copyright (C) 2018 Laird,
|
||||
* 2018 Ben Whitten <ben.whitten@lairdtech.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/ {
|
||||
sound {
|
||||
compatible = "atmel,asoc-wm8904";
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_pck2_as_audio_mck>;
|
||||
|
||||
atmel,model = "wm8904 @ DVK-SOM60";
|
||||
atmel,audio-routing =
|
||||
"Headphone Jack", "HPOUTL",
|
||||
"Headphone Jack", "HPOUTR",
|
||||
"IN2L", "Line In Jack",
|
||||
"IN2R", "Line In Jack",
|
||||
"Mic", "MICBIAS",
|
||||
"IN1L", "Mic";
|
||||
|
||||
atmel,ssc-controller = <&ssc0>;
|
||||
atmel,audio-codec = <&wm8904>;
|
||||
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
slot@0 {
|
||||
bus-width = <4>;
|
||||
cd-gpios = <&pioE 31 GPIO_ACTIVE_HIGH>;
|
||||
cd-inverted;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
|
||||
/* spi0.0: 4M Flash Macronix MX25R4035FM1IL0 */
|
||||
spi-flash@0 {
|
||||
compatible = "mxicy,mx25u4035", "jedec,spi-nor";
|
||||
spi-max-frequency = <33000000>;
|
||||
reg = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
&ssc0 {
|
||||
atmel,clk-from-rk-pin;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
|
||||
wm8904: wm8904@1a {
|
||||
compatible = "wlf,wm8904";
|
||||
reg = <0x1a>;
|
||||
clocks = <&pck2>;
|
||||
clock-names = "mclk";
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
eeprom@87 {
|
||||
compatible = "giantec,gt24c32a", "atmel,24c32";
|
||||
reg = <87>;
|
||||
pagesize = <32>;
|
||||
};
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&pit {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&can1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ethernet-phy@7 {
|
||||
reg = <7>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_geth_int>;
|
||||
interrupt-parent = <&pioB>;
|
||||
interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
|
||||
txen-skew-ps = <800>;
|
||||
txc-skew-ps = <3000>;
|
||||
rxdv-skew-ps = <400>;
|
||||
rxc-skew-ps = <3000>;
|
||||
rxd0-skew-ps = <400>;
|
||||
rxd1-skew-ps = <400>;
|
||||
rxd2-skew-ps = <400>;
|
||||
rxd3-skew-ps = <400>;
|
||||
};
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
ethernet-phy@1 {
|
||||
reg = <1>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_eth_int>;
|
||||
interrupt-parent = <&pioC>;
|
||||
interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-dvk_su60_somc_lcm.dtsi - Device Tree file for the DVK SOM60 LCD board
|
||||
*
|
||||
* Copyright (C) 2018 Laird,
|
||||
* 2018 Ben Whitten <ben.whitten@lairdtech.com>
|
||||
*
|
||||
*/
|
||||
|
||||
/ {
|
||||
backlight: backlight {
|
||||
compatible = "pwm-backlight";
|
||||
pwms = <&hlcdc_pwm 0 50000 0>;
|
||||
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||
default-brightness-level = <6>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
panel: panel {
|
||||
compatible = "winstar,wf70gtiagdng0", "innolux,at070tn92", "simple-panel";
|
||||
backlight = <&backlight>;
|
||||
power-supply = <&vcc_lcd_reg>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
status = "okay";
|
||||
|
||||
port@0 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0>;
|
||||
|
||||
panel_input: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&hlcdc_panel_output>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
vcc_lcd_reg: fixedregulator_lcd {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "VCC LCM";
|
||||
regulator-min-microvolt = <5000000>;
|
||||
regulator-max-microvolt = <5000000>;
|
||||
regulator-boot-on;
|
||||
regulator-always-on;
|
||||
status = "okay";
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
board {
|
||||
pinctrl_lcd_ctp_int: lcd_ctp_int {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 28 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
|
||||
ft5426@56 {
|
||||
compatible = "focaltech,ft5426", "edt,edt-ft5406";
|
||||
reg = <56>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_ctp_int>;
|
||||
|
||||
interrupt-parent = <&pioC>;
|
||||
interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
|
||||
|
||||
touchscreen-size-x = <800>;
|
||||
touchscreen-size-y = <480>;
|
||||
};
|
||||
};
|
||||
|
||||
&hlcdc {
|
||||
status = "okay";
|
||||
|
||||
hlcdc-display-controller {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_lcd_base &pinctrl_lcd_rgb888>;
|
||||
|
||||
port@0 {
|
||||
hlcdc_panel_output: endpoint@0 {
|
||||
reg = <0>;
|
||||
remote-endpoint = <&panel_input>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
|
@ -0,0 +1,121 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-gatwick.dts - Device Tree file for the Gatwick board
|
||||
*
|
||||
* Copyright (C) 2018 Laird
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "at91-wb50n.dtsi"
|
||||
#include <dt-bindings/input/input.h>
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Project Gatwick";
|
||||
compatible = "laird,gatwick", "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
autorepeat;
|
||||
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_key_gpio>;
|
||||
|
||||
reset-button {
|
||||
label = "Reset Button";
|
||||
linux,code = <KEY_SETUP>;
|
||||
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
|
||||
wakeup-source;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
ethernet {
|
||||
label = "gatwick:yellow:ethernet";
|
||||
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
wifi {
|
||||
label = "gatwick:green:wifi";
|
||||
gpios = <&pioA 28 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
ble {
|
||||
label = "gatwick:blue:ble";
|
||||
gpios = <&pioA 22 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
lora {
|
||||
label = "gatwick:orange:lora";
|
||||
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
blank {
|
||||
label = "gatwick:green:blank";
|
||||
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
user {
|
||||
label = "gatwick:yellow:user";
|
||||
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
board {
|
||||
pinctrl_key_gpio: key_gpio_0 {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PE31 GPIO with pullup deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* FTDI USART */
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* GPS USART */
|
||||
&usart1 {
|
||||
pinctrl-0 = <&pinctrl_usart1>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
spidev@0 {
|
||||
compatible = "semtech,sx1301";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <8000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
/delete-property/atmel,oc-gpio;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,230 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-som60.dtsi - Device Tree file for the SOM60 module
|
||||
*
|
||||
* Copyright (C) 2018 Laird,
|
||||
* 2018 Ben Whitten <ben.whitten@lairdtech.com>
|
||||
*
|
||||
*/
|
||||
#include "sama5d36.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird SOM60";
|
||||
compatible = "laird,som60", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
stdout-path = &dbgu;
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x8000000>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_mmc0_en: mmc0_en {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
};
|
||||
|
||||
pinctrl_nand0_wp: nand0_wp {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>;
|
||||
};
|
||||
|
||||
pinctrl_usb_vbus: usb_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 20 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
|
||||
/* Conflicts with USART2_SCK */
|
||||
};
|
||||
|
||||
pinctrl_usart2_sck: usart2_sck {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 20 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
/* Conflicts with USB_VBUS */
|
||||
};
|
||||
|
||||
pinctrl_usb_oc: usb_oc {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
/* Conflicts with USART3_SCK */
|
||||
};
|
||||
|
||||
pinctrl_usart3_sck: usart3_sck {
|
||||
atmel,pins =
|
||||
<AT91_PIOE 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
/* Conflicts with USB_OC */
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 14 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_geth_int: geth_int {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 25 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
/* Conflicts with USART1_SCK */
|
||||
};
|
||||
|
||||
pinctrl_usart1_sck: usart1_sck {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 25 AT91_PERIPH_A AT91_PINCTRL_NONE>;
|
||||
/* Conflicts with GETH_INT */
|
||||
};
|
||||
|
||||
pinctrl_eth_int: eth_int {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 10 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
|
||||
};
|
||||
|
||||
pinctrl_pck2_as_audio_mck: pck2_as_audio_mck {
|
||||
atmel,pins =
|
||||
<AT91_PIOC 15 AT91_PERIPH_B AT91_PINCTRL_NONE>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <8>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
status = "okay";
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
cs-gpios = <&pioD 13 0>, <0>, <0>, <0>;
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
status = "okay";
|
||||
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
|
||||
};
|
||||
|
||||
&usart1 {
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
};
|
||||
|
||||
&usart2 {
|
||||
pinctrl-0 = <&pinctrl_usart2 &pinctrl_usart2_rts_cts>;
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
|
||||
};
|
||||
|
||||
&adc0 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_adc0_adtrg
|
||||
&pinctrl_adc0_ad0
|
||||
&pinctrl_adc0_ad1
|
||||
&pinctrl_adc0_ad2
|
||||
&pinctrl_adc0_ad3
|
||||
&pinctrl_adc0_ad4
|
||||
&pinctrl_adc0_ad5
|
||||
>;
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rgmii";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-0 = <&pinctrl_ebi_nand_addr>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand: nand@3 {
|
||||
reg = <0x3 0x0 0x2>;
|
||||
atmel,rb = <0>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
ubootspl@0 {
|
||||
label = "u-boot-spl";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
ubi@e0000 {
|
||||
label = "ubi";
|
||||
reg = <0xe0000 0xfe00000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
atmel,vbus-gpio = <&pioC 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usb_vbus &pinctrl_usb_oc>;
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <0
|
||||
&pioE 20 GPIO_ACTIVE_HIGH
|
||||
0>;
|
||||
atmel,oc-gpio = <0
|
||||
&pioE 15 GPIO_ACTIVE_LOW
|
||||
0>;
|
||||
};
|
||||
|
|
@ -0,0 +1,64 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-wb45n.dts - Device Tree file for WB45NBT board
|
||||
*
|
||||
* Copyright (C) 2018 Laird
|
||||
*
|
||||
*/
|
||||
/dts-v1/;
|
||||
#include "at91-wb45n.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
|
||||
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
irqbtn@18 {
|
||||
reg = <18>;
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>;
|
||||
gpios = <&pioB 18 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usart3 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,165 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-wb45n.dtsi - Device Tree file for WB45NBT board
|
||||
*
|
||||
* Copyright (C) 2018 Laird
|
||||
*
|
||||
*/
|
||||
|
||||
#include "at91sam9g25.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 45N - Atmel AT91SAM (dt)";
|
||||
compatible = "laird,wb45n", "laird,wbxx", "atmel,at91sam9x5", "atmel,at91sam9";
|
||||
|
||||
chosen {
|
||||
bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
|
||||
atheros {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
};
|
||||
};
|
||||
|
||||
&reset_controller {
|
||||
compatible = "atmel,sama5d3-rstc";
|
||||
};
|
||||
|
||||
&shutdown_controller {
|
||||
atmel,wakeup-mode = "low";
|
||||
};
|
||||
|
||||
&slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
&ebi {
|
||||
status = "okay";
|
||||
nand_controller: nand-controller {
|
||||
pinctrl-0 = <&pinctrl_nand_cs &pinctrl_nand_rb &pinctrl_nand_oe_we>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
|
||||
nand@3 {
|
||||
reg = <0x3 0x0 0x800000>;
|
||||
rb-gpios = <&pioD 5 GPIO_ACTIVE_HIGH>;
|
||||
cs-gpios = <&pioD 4 GPIO_ACTIVE_HIGH>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <4>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "redund-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x280000>;
|
||||
};
|
||||
|
||||
kernel-b@360000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x360000 0x280000>;
|
||||
};
|
||||
|
||||
rootfs-a@5e0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0x5e0000 0x2600000>;
|
||||
};
|
||||
|
||||
rootfs-b@2be0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x2be0000 0x2600000>;
|
||||
};
|
||||
|
||||
user@51e0000 {
|
||||
label = "user";
|
||||
reg = <0x51e0000 0x2dc0000>;
|
||||
};
|
||||
|
||||
logs@7fa0000 {
|
||||
label = "logs";
|
||||
reg = <0x7fa0000 0x60000>;
|
||||
};
|
||||
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
num-ports = <2>;
|
||||
atmel,vbus-gpio = <
|
||||
&pioB 12 GPIO_ACTIVE_HIGH
|
||||
&pioA 31 GPIO_ACTIVE_HIGH
|
||||
>;
|
||||
atmel,oc-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&macb0 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&spi0 {
|
||||
cs-gpios = <&pioA 14 0>, <&pioA 7 0>, <0>, <0>;
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_board_usb2>;
|
||||
atmel,vbus-gpio = <&pioB 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-0 = <
|
||||
&pinctrl_mmc0_slot0_clk_cmd_dat0
|
||||
&pinctrl_mmc0_slot0_dat1_3>;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
usb2 {
|
||||
pinctrl_board_usb2: usb2-board {
|
||||
atmel,pins =
|
||||
<AT91_PIOB 11 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB11 gpio vbus sense, deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-wb50n.dts - Device Tree file for wb50n evaluation board
|
||||
*
|
||||
* Copyright (C) 2018 Laird
|
||||
*
|
||||
*/
|
||||
|
||||
/dts-v1/;
|
||||
#include "at91-wb50n.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
gpio_keys {
|
||||
compatible = "gpio-keys";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
btn0@10 {
|
||||
reg = <10>;
|
||||
label = "BTNESC";
|
||||
linux,code = <1>; /* ESC button */
|
||||
gpios = <&pioA 10 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
|
||||
irqbtn@31 {
|
||||
reg = <31>;
|
||||
label = "IRQBTN";
|
||||
linux,code = <99>; /* SysReq button */
|
||||
gpios = <&pioE 31 GPIO_ACTIVE_LOW>;
|
||||
gpio-key,wakeup = <1>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
led0 {
|
||||
label = "wb50n:blue:led0";
|
||||
gpios = <&pioA 12 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led1 {
|
||||
label = "wb50n:green:led1";
|
||||
gpios = <&pioA 24 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
|
||||
led2 {
|
||||
label = "wb50n:red:led2";
|
||||
gpios = <&pioA 26 GPIO_ACTIVE_LOW>;
|
||||
default-state = "off";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&watchdog {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
&usart0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
&usart1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&i2c0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
status = "okay";
|
||||
|
||||
spidev@0 {
|
||||
compatible = "spidev";
|
||||
reg = <0>;
|
||||
spi-max-frequency = <8000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
|
|
@ -0,0 +1,198 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/*
|
||||
* at91-wb50n.dtsi - Device Tree include file for wb50n cpu module
|
||||
*
|
||||
* Copyright (C) 2018 Laird
|
||||
*
|
||||
*/
|
||||
|
||||
#include "sama5d31.dtsi"
|
||||
|
||||
/ {
|
||||
model = "Laird Workgroup Bridge 50N - Atmel SAMA5D";
|
||||
compatible = "laird,wb50n", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5";
|
||||
|
||||
chosen {
|
||||
bootargs = "ubi.mtd=6 root=ubi0:rootfs rootfstype=ubifs rw";
|
||||
stdout-path = "serial0:115200n8";
|
||||
};
|
||||
|
||||
memory {
|
||||
reg = <0x20000000 0x4000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&pinctrl {
|
||||
board {
|
||||
pinctrl_mmc0_cd: mmc0_cd {
|
||||
atmel,pins = <AT91_PIOC 26 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PC26 GPIO with pullup deglitch */
|
||||
};
|
||||
|
||||
pinctrl_usba_vbus: usba_vbus {
|
||||
atmel,pins = <AT91_PIOB 13 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>; /* PB13 GPIO with deglitch */
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&slow_xtal {
|
||||
clock-frequency = <32768>;
|
||||
};
|
||||
|
||||
&main_xtal {
|
||||
clock-frequency = <12000000>;
|
||||
};
|
||||
|
||||
&slow_osc {
|
||||
atmel,osc-bypass;
|
||||
};
|
||||
|
||||
&usart1_clk {
|
||||
atmel,clk-output-range = <0 132000000>;
|
||||
};
|
||||
|
||||
&mmc0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc0_clk_cmd_dat0 &pinctrl_mmc0_dat1_3 &pinctrl_mmc0_cd>;
|
||||
cd-gpios = <&pioC 26 GPIO_ACTIVE_LOW>;
|
||||
slot@0 {
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&mmc1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3>;
|
||||
status = "okay";
|
||||
atheros@0 {
|
||||
compatible = "atheros,ath6kl";
|
||||
atheros,board-id = "SD32";
|
||||
reg = <0>;
|
||||
bus-width = <4>;
|
||||
};
|
||||
};
|
||||
|
||||
&macb1 {
|
||||
phy-mode = "rmii";
|
||||
};
|
||||
|
||||
&dbgu {
|
||||
dmas = <0>, <0>; /* Do not use DMA for dbgu */
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART1 */
|
||||
&usart0 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart0 &pinctrl_usart0_rts_cts>;
|
||||
};
|
||||
|
||||
/* On BB40 this port is labeled UART0 */
|
||||
&usart1 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart1 &pinctrl_usart1_rts_cts>;
|
||||
dtr-gpios = <&pioD 13 GPIO_ACTIVE_LOW>;
|
||||
dsr-gpios = <&pioD 11 GPIO_ACTIVE_LOW>;
|
||||
dcd-gpios = <&pioD 7 GPIO_ACTIVE_LOW>;
|
||||
rng-gpios = <&pioD 8 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
/* USART3 is direct-connect to the Bluetooth UART on the radio SIP */
|
||||
&usart3 {
|
||||
atmel,use-dma-rx;
|
||||
atmel,use-dma-tx;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usart3 &pinctrl_usart3_rts_cts>;
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&spi1 {
|
||||
cs-gpios = <&pioC 25 0>, <0>, <0>, <0>;
|
||||
};
|
||||
|
||||
&ebi {
|
||||
pinctrl-0 = <&pinctrl_ebi_nand_addr>;
|
||||
pinctrl-names = "default";
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&nand_controller {
|
||||
status = "okay";
|
||||
|
||||
nand: nand@3 {
|
||||
reg = <0x3 0x0 0x2>;
|
||||
atmel,rb = <0>;
|
||||
nand-bus-width = <8>;
|
||||
nand-ecc-mode = "hw";
|
||||
nand-ecc-strength = <8>;
|
||||
nand-ecc-step-size = <512>;
|
||||
nand-on-flash-bbt;
|
||||
label = "atmel_nand";
|
||||
|
||||
partitions {
|
||||
compatible = "fixed-partitions";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
||||
at91bootstrap@0 {
|
||||
label = "at91bs";
|
||||
reg = <0x0 0x20000>;
|
||||
};
|
||||
|
||||
uboot@20000 {
|
||||
label = "u-boot";
|
||||
reg = <0x20000 0x80000>;
|
||||
};
|
||||
|
||||
ubootenv@a0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xa0000 0x20000>;
|
||||
};
|
||||
|
||||
ubootenv@c0000 {
|
||||
label = "u-boot-env";
|
||||
reg = <0xc0000 0x20000>;
|
||||
};
|
||||
|
||||
kernel-a@e0000 {
|
||||
label = "kernel-a";
|
||||
reg = <0xe0000 0x500000>;
|
||||
};
|
||||
|
||||
kernel-b@5e0000 {
|
||||
label = "kernel-b";
|
||||
reg = <0x5e0000 0x500000>;
|
||||
};
|
||||
|
||||
rootfs-a@ae0000 {
|
||||
label = "rootfs-a";
|
||||
reg = <0xae0000 0x3000000>;
|
||||
};
|
||||
|
||||
rootfs-b@3ae0000 {
|
||||
label = "rootfs-b";
|
||||
reg = <0x3ae0000 0x3000000>;
|
||||
};
|
||||
|
||||
user@6ae0000 {
|
||||
label = "user";
|
||||
reg = <0x6ae0000 0x14e0000>;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb0 {
|
||||
atmel,vbus-gpio = <&pioB 13 GPIO_ACTIVE_LOW>;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&pinctrl_usba_vbus>;
|
||||
};
|
||||
|
||||
&usb1 {
|
||||
num-ports = <3>;
|
||||
atmel,vbus-gpio = <&pioA 2 GPIO_ACTIVE_LOW>;
|
||||
atmel,oc-gpio = <&pioA 4 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
|
@ -590,7 +590,7 @@
|
|||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc", "syscon";
|
||||
compatible = "atmel,at91sam9261-pmc", "syscon";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
interrupt-controller;
|
||||
|
|
|
|||
|
|
@ -93,7 +93,7 @@
|
|||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91rm9200-pmc", "syscon";
|
||||
compatible = "atmel,at91sam9263-pmc", "syscon";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
interrupt-controller;
|
||||
|
|
|
|||
|
|
@ -832,7 +832,7 @@
|
|||
};
|
||||
|
||||
pmc: pmc@fffffc00 {
|
||||
compatible = "atmel,at91sam9g45-pmc", "syscon";
|
||||
compatible = "atmel,at91sam9rl-pmc", "syscon";
|
||||
reg = <0xfffffc00 0x100>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
interrupt-controller;
|
||||
|
|
|
|||
|
|
@ -389,13 +389,13 @@
|
|||
};
|
||||
};
|
||||
|
||||
rstc@fffffe00 {
|
||||
reset_controller: rstc@fffffe00 {
|
||||
compatible = "atmel,at91sam9g45-rstc";
|
||||
reg = <0xfffffe00 0x10>;
|
||||
clocks = <&clk32k>;
|
||||
};
|
||||
|
||||
shdwc@fffffe10 {
|
||||
shutdown_controller: shdwc@fffffe10 {
|
||||
compatible = "atmel,at91sam9x5-shdwc";
|
||||
reg = <0xfffffe10 0x10>;
|
||||
clocks = <&clk32k>;
|
||||
|
|
@ -470,7 +470,7 @@
|
|||
clock-names = "dma_clk";
|
||||
};
|
||||
|
||||
pinctrl@fffff400 {
|
||||
pinctrl: pinctrl@fffff400 {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
compatible = "atmel,at91sam9x5-pinctrl", "atmel,at91rm9200-pinctrl", "simple-bus";
|
||||
|
|
@ -1206,7 +1206,7 @@
|
|||
};
|
||||
};
|
||||
|
||||
watchdog@fffffe40 {
|
||||
watchdog: watchdog@fffffe40 {
|
||||
compatible = "atmel,at91sam9260-wdt";
|
||||
reg = <0xfffffe40 0x10>;
|
||||
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
|
||||
|
|
|
|||
|
|
@ -41,6 +41,10 @@
|
|||
model = "Broadcom Cygnus SoC";
|
||||
interrupt-parent = <&gic>;
|
||||
|
||||
aliases {
|
||||
ethernet0 = ð0;
|
||||
};
|
||||
|
||||
cpus {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
|
@ -417,6 +421,11 @@
|
|||
status = "disabled";
|
||||
};
|
||||
|
||||
rng: rng@18032000 {
|
||||
compatible = "brcm,iproc-rng200";
|
||||
reg = <0x18032000 0x28>;
|
||||
};
|
||||
|
||||
sdhci0: sdhci@18041000 {
|
||||
compatible = "brcm,sdhci-iproc-cygnus";
|
||||
reg = <0x18041000 0x100>;
|
||||
|
|
|
|||
|
|
@ -0,0 +1,88 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
#include "bcm2835-rpi-cm1.dtsi"
|
||||
#include "bcm283x-rpi-usb-host.dtsi"
|
||||
|
||||
/ {
|
||||
compatible = "raspberrypi,compute-module", "brcm,bcm2835";
|
||||
model = "Raspberry Pi Compute Module IO board rev1";
|
||||
};
|
||||
|
||||
&gpio {
|
||||
/*
|
||||
* This is based on the official GPU firmware DT blob.
|
||||
*
|
||||
* Legend:
|
||||
* "NC" = not connected (no rail from the SoC)
|
||||
* "FOO" = GPIO line named "FOO" on the schematic
|
||||
* "FOO_N" = GPIO line named "FOO" on schematic, active low
|
||||
*/
|
||||
gpio-line-names = "GPIO0",
|
||||
"GPIO1",
|
||||
"GPIO2",
|
||||
"GPIO3",
|
||||
"GPIO4",
|
||||
"GPIO5",
|
||||
"GPIO6",
|
||||
"GPIO7",
|
||||
"GPIO8",
|
||||
"GPIO9",
|
||||
"GPIO10",
|
||||
"GPIO11",
|
||||
"GPIO12",
|
||||
"GPIO13",
|
||||
"GPIO14",
|
||||
"GPIO15",
|
||||
"GPIO16",
|
||||
"GPIO17",
|
||||
"GPIO18",
|
||||
"GPIO19",
|
||||
"GPIO20",
|
||||
"GPIO21",
|
||||
"GPIO22",
|
||||
"GPIO23",
|
||||
"GPIO24",
|
||||
"GPIO25",
|
||||
"GPIO26",
|
||||
"GPIO27",
|
||||
"GPIO28",
|
||||
"GPIO29",
|
||||
"GPIO30",
|
||||
"GPIO31",
|
||||
"GPIO32",
|
||||
"GPIO33",
|
||||
"GPIO34",
|
||||
"GPIO35",
|
||||
"GPIO36",
|
||||
"GPIO37",
|
||||
"GPIO38",
|
||||
"GPIO39",
|
||||
"GPIO40",
|
||||
"GPIO41",
|
||||
"GPIO42",
|
||||
"GPIO43",
|
||||
"GPIO44",
|
||||
"GPIO45",
|
||||
"HDMI_HPD_N",
|
||||
/* Also used as ACT LED */
|
||||
"EMMC_EN_N",
|
||||
/* Used by eMMC */
|
||||
"SD_CLK_R",
|
||||
"SD_CMD_R",
|
||||
"SD_DATA0_R",
|
||||
"SD_DATA1_R",
|
||||
"SD_DATA2_R",
|
||||
"SD_DATA3_R";
|
||||
|
||||
pinctrl-0 = <&gpioout &alt0>;
|
||||
};
|
||||
|
||||
&hdmi {
|
||||
hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&uart0_gpio14>;
|
||||
status = "okay";
|
||||
};
|
||||
|
|
@ -0,0 +1,34 @@
|
|||
// SPDX-License-Identifier: GPL-2.0
|
||||
/dts-v1/;
|
||||
#include "bcm2835.dtsi"
|
||||
#include "bcm2835-rpi.dtsi"
|
||||
|
||||
/ {
|
||||
leds {
|
||||
act {
|
||||
gpios = <&gpio 47 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
reg_3v3: fixed-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "3V3";
|
||||
regulator-min-microvolt = <3300000>;
|
||||
regulator-max-microvolt = <3300000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
|
||||
reg_1v8: fixed-regulator {
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "1V8";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
regulator-always-on;
|
||||
};
|
||||
};
|
||||
|
||||
&sdhost {
|
||||
non-removable;
|
||||
vmmc-supply = <®_3v3>;
|
||||
vqmmc-supply = <®_1v8>;
|
||||
};
|
||||
|
|
@ -17,6 +17,12 @@
|
|||
};
|
||||
};
|
||||
|
||||
arm-pmu {
|
||||
compatible = "arm,cortex-a53-pmu";
|
||||
interrupt-parent = <&local_intc>;
|
||||
interrupts = <9 IRQ_TYPE_LEVEL_HIGH>;
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupt-parent = <&local_intc>;
|
||||
|
|
|
|||
|
|
@ -66,6 +66,12 @@
|
|||
clock-frequency = <1000000>;
|
||||
};
|
||||
|
||||
txp@7e004000 {
|
||||
compatible = "brcm,bcm2835-txp";
|
||||
reg = <0x7e004000 0x20>;
|
||||
interrupts = <1 11>;
|
||||
};
|
||||
|
||||
dma: dma@7e007000 {
|
||||
compatible = "brcm,bcm2835-dma";
|
||||
reg = <0x7e007000 0xf00>;
|
||||
|
|
|
|||
|
|
@ -90,3 +90,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -80,3 +80,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -146,3 +146,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -38,3 +38,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -57,3 +57,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -64,3 +64,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -91,3 +91,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -83,3 +83,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -158,3 +158,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -74,3 +74,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -118,3 +118,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -104,3 +104,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -57,3 +57,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -105,3 +105,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -99,3 +99,7 @@
|
|||
&usb2 {
|
||||
vcc-gpio = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -62,3 +62,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -127,3 +127,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -39,3 +39,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -101,3 +101,7 @@
|
|||
&usb3 {
|
||||
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -182,3 +182,7 @@
|
|||
&usb3 {
|
||||
vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -104,3 +104,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -115,3 +115,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -31,5 +31,238 @@
|
|||
linux,code = <KEY_WPS_BUTTON>;
|
||||
gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
rfkill {
|
||||
label = "WiFi";
|
||||
linux,code = <KEY_RFKILL>;
|
||||
gpios = <&chipcommon 16 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
reset {
|
||||
label = "Reset";
|
||||
linux,code = <KEY_RESTART>;
|
||||
gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
};
|
||||
|
||||
leds {
|
||||
compatible = "gpio-leds";
|
||||
|
||||
wps {
|
||||
label = "bcm53xx:white:wps";
|
||||
gpios = <&chipcommon 22 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
usb2 {
|
||||
label = "bcm53xx:green:usb2";
|
||||
gpios = <&chipcommon 1 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&ohci_port2>, <&ehci_port2>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
usb3 {
|
||||
label = "bcm53xx:green:usb3";
|
||||
gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
|
||||
trigger-sources = <&ohci_port1>, <&ehci_port1>,
|
||||
<&xhci_port1>;
|
||||
linux,default-trigger = "usbport";
|
||||
};
|
||||
|
||||
power {
|
||||
label = "bcm53xx:white:power";
|
||||
gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
wifi-disabled {
|
||||
label = "bcm53xx:amber:wifi-disabled";
|
||||
gpios = <&chipcommon 0 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
wifi-enabled {
|
||||
label = "bcm53xx:white:wifi-enabled";
|
||||
gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar1 {
|
||||
label = "bcm53xx:white:bluebar1";
|
||||
gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar2 {
|
||||
label = "bcm53xx:white:bluebar2";
|
||||
gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar3 {
|
||||
label = "bcm53xx:white:bluebar3";
|
||||
gpios = <&chipcommon 15 GPIO_ACTIVE_LOW>;
|
||||
};
|
||||
|
||||
bluebar4 {
|
||||
label = "bcm53xx:white:bluebar4";
|
||||
gpios = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar5 {
|
||||
label = "bcm53xx:white:bluebar5";
|
||||
gpios = <&chipcommon 19 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar6 {
|
||||
label = "bcm53xx:white:bluebar6";
|
||||
gpios = <&chipcommon 20 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar7 {
|
||||
label = "bcm53xx:white:bluebar7";
|
||||
gpios = <&chipcommon 21 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
bluebar8 {
|
||||
label = "bcm53xx:white:bluebar8";
|
||||
gpios = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio-bus-mux {
|
||||
/* BIT(9) = 1 => external mdio */
|
||||
mdio_ext: mdio@200 {
|
||||
reg = <0x200>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
};
|
||||
};
|
||||
|
||||
mdio-mii-mux {
|
||||
compatible = "mdio-mux-mmioreg";
|
||||
mdio-parent-bus = <&mdio_ext>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x1800c1c0 0x4>;
|
||||
|
||||
/* BIT(6) = mdc, BIT(7) = mdio */
|
||||
mux-mask = <0xc0>;
|
||||
|
||||
mdio-mii@0 {
|
||||
/* Enable MII function */
|
||||
reg = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
switch@0 {
|
||||
compatible = "brcm,bcm53125";
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reset-gpios = <&chipcommon 10 GPIO_ACTIVE_LOW>;
|
||||
reset-names = "robo_reset";
|
||||
reg = <0>;
|
||||
dsa,member = <1 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@0 {
|
||||
reg = <0>;
|
||||
label = "lan1";
|
||||
};
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan5";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan2";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan6";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "lan3";
|
||||
};
|
||||
|
||||
sw1_p8: port@8 {
|
||||
reg = <8>;
|
||||
ethernet = <&sw0_p0>;
|
||||
label = "cpu";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb2 {
|
||||
vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&usb3 {
|
||||
vcc-gpio = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
|
||||
};
|
||||
|
||||
&srab {
|
||||
compatible = "brcm,bcm53012-srab", "brcm,bcm5301x-srab";
|
||||
status = "okay";
|
||||
dsa,member = <0 0>;
|
||||
|
||||
ports {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
port@1 {
|
||||
reg = <1>;
|
||||
label = "lan7";
|
||||
};
|
||||
|
||||
port@2 {
|
||||
reg = <2>;
|
||||
label = "lan4";
|
||||
};
|
||||
|
||||
port@3 {
|
||||
reg = <3>;
|
||||
label = "lan8";
|
||||
};
|
||||
|
||||
port@4 {
|
||||
reg = <4>;
|
||||
label = "wan";
|
||||
};
|
||||
|
||||
port@8 {
|
||||
reg = <8>;
|
||||
ethernet = <&gmac2>;
|
||||
label = "cpu";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
|
||||
sw0_p0: port@0 {
|
||||
reg = <0>;
|
||||
label = "extsw";
|
||||
|
||||
fixed-link {
|
||||
speed = <1000>;
|
||||
full-duplex;
|
||||
};
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -60,3 +60,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -60,3 +60,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -100,3 +100,7 @@
|
|||
&spi_nor {
|
||||
status = "okay";
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -91,3 +91,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -7,9 +7,10 @@
|
|||
#include "bcm4708.dtsi"
|
||||
|
||||
/ {
|
||||
usb3_phy: usb3-phy {
|
||||
compatible = "brcm,ns-bx-usb3-phy";
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
compatible = "brcm,ns-bx-usb3-phy";
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
|
|
|
|||
|
|
@ -154,13 +154,6 @@
|
|||
clock-names = "phy-ref-clk";
|
||||
};
|
||||
|
||||
usb3_phy: usb3-phy {
|
||||
compatible = "brcm,ns-ax-usb3-phy";
|
||||
reg = <0x18105000 0x1000>, <0x18003000 0x1000>;
|
||||
reg-names = "dmp", "ccb-mii";
|
||||
#phy-cells = <0>;
|
||||
};
|
||||
|
||||
axi@18000000 {
|
||||
compatible = "brcm,bus-axi";
|
||||
reg = <0x18000000 0x1000>;
|
||||
|
|
@ -359,7 +352,33 @@
|
|||
reg = <0x18003000 0x8>;
|
||||
#size-cells = <1>;
|
||||
#address-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
|
||||
mdio-bus-mux {
|
||||
compatible = "mdio-mux-mmioreg";
|
||||
mdio-parent-bus = <&mdio>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
reg = <0x18003000 0x4>;
|
||||
mux-mask = <0x200>;
|
||||
|
||||
mdio@0 {
|
||||
reg = <0x0>;
|
||||
#address-cells = <1>;
|
||||
#size-cells = <0>;
|
||||
|
||||
usb3_phy: usb3-phy@10 {
|
||||
compatible = "brcm,ns-ax-usb3-phy";
|
||||
reg = <0x10>;
|
||||
usb3-dmp-syscon = <&usb3_dmp>;
|
||||
#phy-cells = <0>;
|
||||
status = "disabled";
|
||||
};
|
||||
};
|
||||
};
|
||||
|
||||
usb3_dmp: syscon@18105000 {
|
||||
reg = <0x18105000 0x1000>;
|
||||
};
|
||||
|
||||
i2c0: i2c@18009000 {
|
||||
|
|
|
|||
|
|
@ -48,6 +48,14 @@
|
|||
};
|
||||
};
|
||||
|
||||
timer {
|
||||
compatible = "arm,armv7-timer";
|
||||
interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
|
||||
<GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>;
|
||||
};
|
||||
|
||||
clocks {
|
||||
#address-cells = <1>;
|
||||
#size-cells = <1>;
|
||||
|
|
|
|||
|
|
@ -42,3 +42,7 @@
|
|||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -42,3 +42,7 @@
|
|||
reg = <0x00000000 0x08000000>;
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
|
|
@ -90,3 +90,7 @@
|
|||
};
|
||||
};
|
||||
};
|
||||
|
||||
&usb3_phy {
|
||||
status = "okay";
|
||||
};
|
||||
|
|
|
|||
Некоторые файлы не были показаны из-за слишком большого количества измененных файлов Показать больше
Загрузка…
Ссылка в новой задаче