extcon: int3496: Add Intel INT3496 ACPI device extcon driver
Add an extcon driver for USB OTG ports controlled by an Intel INT3496 ACPI device (e.g. Baytrail, Cherrytrail devices). Signed-off-by: David Cohen <david.a.cohen@intel.com> [hdgoede@redhat.com: Port to current kernel, cleanup, submit upstream] [hdgoede@redhat.com: Add Documentation/extcon/intel-int3496.txt] Signed-off-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
This commit is contained in:
David Cohen
Chanwoo Choi
Родитель
5298b83658
Коммит
2f556bdb9f
|
|
@ -0,0 +1,22 @@
|
|||
Intel INT3496 ACPI device extcon driver documentation
|
||||
-----------------------------------------------------
|
||||
|
||||
The Intel INT3496 ACPI device extcon driver is a driver for ACPI
|
||||
devices with an acpi-id of INT3496, such as found for example on
|
||||
Intel Baytrail and Cherrytrail tablets.
|
||||
|
||||
This ACPI device describes how the OS can read the id-pin of the devices'
|
||||
USB-otg port, as well as how it optionally can enable Vbus output on the
|
||||
otg port and how it can optionally control the muxing of the data pins
|
||||
between an USB host and an USB peripheral controller.
|
||||
|
||||
The ACPI devices exposes this functionality by returning an array with up
|
||||
to 3 gpio descriptors from its ACPI _CRS (Current Resource Settings) call:
|
||||
|
||||
Index 0: The input gpio for the id-pin, this is always present and valid
|
||||
Index 1: The output gpio for enabling Vbus output from the device to the otg
|
||||
port, write 1 to enable the Vbus output (this gpio descriptor may
|
||||
be absent or invalid)
|
||||
Index 2: The output gpio for muxing of the data pins between the USB host and
|
||||
the USB peripheral controller, write 1 to mux to the peripheral
|
||||
controller
|
||||
|
|
@ -42,6 +42,16 @@ config EXTCON_GPIO
|
|||
Say Y here to enable GPIO based extcon support. Note that GPIO
|
||||
extcon supports single state per extcon instance.
|
||||
|
||||
config EXTCON_INTEL_INT3496
|
||||
tristate "Intel INT3496 ACPI device extcon driver"
|
||||
depends on GPIOLIB && ACPI
|
||||
help
|
||||
Say Y here to enable extcon support for USB OTG ports controlled by
|
||||
an Intel INT3496 ACPI device.
|
||||
|
||||
This ACPI device is typically found on Intel Baytrail or Cherrytrail
|
||||
based tablets, or other Baytrail / Cherrytrail devices.
|
||||
|
||||
config EXTCON_MAX14577
|
||||
tristate "Maxim MAX14577/77836 EXTCON Support"
|
||||
depends on MFD_MAX14577
|
||||
|
|
|
|||
|
|
@ -8,6 +8,7 @@ obj-$(CONFIG_EXTCON_ADC_JACK) += extcon-adc-jack.o
|
|||
obj-$(CONFIG_EXTCON_ARIZONA) += extcon-arizona.o
|
||||
obj-$(CONFIG_EXTCON_AXP288) += extcon-axp288.o
|
||||
obj-$(CONFIG_EXTCON_GPIO) += extcon-gpio.o
|
||||
obj-$(CONFIG_EXTCON_INTEL_INT3496) += extcon-intel-int3496.o
|
||||
obj-$(CONFIG_EXTCON_MAX14577) += extcon-max14577.o
|
||||
obj-$(CONFIG_EXTCON_MAX3355) += extcon-max3355.o
|
||||
obj-$(CONFIG_EXTCON_MAX77693) += extcon-max77693.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,179 @@
|
|||
/*
|
||||
* Intel INT3496 ACPI device extcon driver
|
||||
*
|
||||
* Copyright (c) 2016 Hans de Goede <hdegoede@redhat.com>
|
||||
*
|
||||
* Based on android x86 kernel code which is:
|
||||
*
|
||||
* Copyright (c) 2014, Intel Corporation.
|
||||
* Author: David Cohen <david.a.cohen@linux.intel.com>
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/acpi.h>
|
||||
#include <linux/extcon.h>
|
||||
#include <linux/gpio.h>
|
||||
#include <linux/interrupt.h>
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
|
||||
#define INT3496_GPIO_USB_ID 0
|
||||
#define INT3496_GPIO_VBUS_EN 1
|
||||
#define INT3496_GPIO_USB_MUX 2
|
||||
#define DEBOUNCE_TIME msecs_to_jiffies(50)
|
||||
|
||||
struct int3496_data {
|
||||
struct device *dev;
|
||||
struct extcon_dev *edev;
|
||||
struct delayed_work work;
|
||||
struct gpio_desc *gpio_usb_id;
|
||||
struct gpio_desc *gpio_vbus_en;
|
||||
struct gpio_desc *gpio_usb_mux;
|
||||
int usb_id_irq;
|
||||
};
|
||||
|
||||
static const unsigned int int3496_cable[] = {
|
||||
EXTCON_USB_HOST,
|
||||
EXTCON_NONE,
|
||||
};
|
||||
|
||||
static void int3496_do_usb_id(struct work_struct *work)
|
||||
{
|
||||
struct int3496_data *data =
|
||||
container_of(work, struct int3496_data, work.work);
|
||||
int id = gpiod_get_value_cansleep(data->gpio_usb_id);
|
||||
|
||||
/* id == 1: PERIPHERAL, id == 0: HOST */
|
||||
dev_dbg(data->dev, "Connected %s cable\n", id ? "PERIPHERAL" : "HOST");
|
||||
|
||||
/*
|
||||
* Peripheral: set USB mux to peripheral and disable VBUS
|
||||
* Host: set USB mux to host and enable VBUS
|
||||
*/
|
||||
if (!IS_ERR(data->gpio_usb_mux))
|
||||
gpiod_direction_output(data->gpio_usb_mux, id);
|
||||
|
||||
if (!IS_ERR(data->gpio_vbus_en))
|
||||
gpiod_direction_output(data->gpio_vbus_en, !id);
|
||||
|
||||
extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id);
|
||||
}
|
||||
|
||||
static irqreturn_t int3496_thread_isr(int irq, void *priv)
|
||||
{
|
||||
struct int3496_data *data = priv;
|
||||
|
||||
/* Let the pin settle before processing it */
|
||||
mod_delayed_work(system_wq, &data->work, DEBOUNCE_TIME);
|
||||
|
||||
return IRQ_HANDLED;
|
||||
}
|
||||
|
||||
static int int3496_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct int3496_data *data;
|
||||
int ret;
|
||||
|
||||
data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL);
|
||||
if (!data)
|
||||
return -ENOMEM;
|
||||
|
||||
data->dev = dev;
|
||||
INIT_DELAYED_WORK(&data->work, int3496_do_usb_id);
|
||||
|
||||
data->gpio_usb_id = devm_gpiod_get_index(dev, "id",
|
||||
INT3496_GPIO_USB_ID,
|
||||
GPIOD_IN);
|
||||
if (IS_ERR(data->gpio_usb_id)) {
|
||||
ret = PTR_ERR(data->gpio_usb_id);
|
||||
dev_err(dev, "can't request USB ID GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
data->usb_id_irq = gpiod_to_irq(data->gpio_usb_id);
|
||||
if (data->usb_id_irq <= 0) {
|
||||
dev_err(dev, "can't get USB ID IRQ: %d\n", data->usb_id_irq);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
data->gpio_vbus_en = devm_gpiod_get_index(dev, "vbus en",
|
||||
INT3496_GPIO_VBUS_EN,
|
||||
GPIOD_ASIS);
|
||||
if (IS_ERR(data->gpio_vbus_en))
|
||||
dev_info(dev, "can't request VBUS EN GPIO\n");
|
||||
|
||||
data->gpio_usb_mux = devm_gpiod_get_index(dev, "usb mux",
|
||||
INT3496_GPIO_USB_MUX,
|
||||
GPIOD_ASIS);
|
||||
if (IS_ERR(data->gpio_usb_mux))
|
||||
dev_info(dev, "can't request USB MUX GPIO\n");
|
||||
|
||||
/* register extcon device */
|
||||
data->edev = devm_extcon_dev_allocate(dev, int3496_cable);
|
||||
if (IS_ERR(data->edev))
|
||||
return -ENOMEM;
|
||||
|
||||
ret = devm_extcon_dev_register(dev, data->edev);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "can't register extcon device: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
ret = devm_request_threaded_irq(dev, data->usb_id_irq,
|
||||
NULL, int3496_thread_isr,
|
||||
IRQF_SHARED | IRQF_ONESHOT |
|
||||
IRQF_TRIGGER_RISING |
|
||||
IRQF_TRIGGER_FALLING,
|
||||
dev_name(dev), data);
|
||||
if (ret < 0) {
|
||||
dev_err(dev, "can't request IRQ for USB ID GPIO: %d\n", ret);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* queue initial processing of id-pin */
|
||||
queue_delayed_work(system_wq, &data->work, 0);
|
||||
|
||||
platform_set_drvdata(pdev, data);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static int int3496_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct int3496_data *data = platform_get_drvdata(pdev);
|
||||
|
||||
devm_free_irq(&pdev->dev, data->usb_id_irq, data);
|
||||
cancel_delayed_work_sync(&data->work);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static struct acpi_device_id int3496_acpi_match[] = {
|
||||
{ "INT3496" },
|
||||
{ }
|
||||
};
|
||||
MODULE_DEVICE_TABLE(acpi, int3496_acpi_match);
|
||||
|
||||
static struct platform_driver int3496_driver = {
|
||||
.driver = {
|
||||
.name = "intel-int3496",
|
||||
.acpi_match_table = int3496_acpi_match,
|
||||
},
|
||||
.probe = int3496_probe,
|
||||
.remove = int3496_remove,
|
||||
};
|
||||
|
||||
module_platform_driver(int3496_driver);
|
||||
|
||||
MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>");
|
||||
MODULE_DESCRIPTION("Intel INT3496 ACPI device extcon driver");
|
||||
MODULE_LICENSE("GPL");
|
||||
Загрузка…
Ссылка в новой задаче