l2tp: Update documentation
This patch adds documentation about the L2TPv3 functionality. Signed-off-by: James Chapman <jchapman@katalix.com> Reviewed-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
This commit is contained in:
James Chapman
David S. Miller
Родитель
789a4a2c61
Коммит
2f77a3f50c
|
|
@ -1,44 +1,95 @@
|
|||
This brief document describes how to use the kernel's PPPoL2TP driver
|
||||
to provide L2TP functionality. L2TP is a protocol that tunnels one or
|
||||
more PPP sessions over a UDP tunnel. It is commonly used for VPNs
|
||||
This document describes how to use the kernel's L2TP drivers to
|
||||
provide L2TP functionality. L2TP is a protocol that tunnels one or
|
||||
more sessions over an IP tunnel. It is commonly used for VPNs
|
||||
(L2TP/IPSec) and by ISPs to tunnel subscriber PPP sessions over an IP
|
||||
network infrastructure.
|
||||
network infrastructure. With L2TPv3, it is also useful as a Layer-2
|
||||
tunneling infrastructure.
|
||||
|
||||
Features
|
||||
========
|
||||
|
||||
L2TPv2 (PPP over L2TP (UDP tunnels)).
|
||||
L2TPv3 ethernet pseudowires.
|
||||
L2TPv3 PPP pseudowires.
|
||||
L2TPv3 IP encapsulation.
|
||||
Netlink sockets for L2TPv3 configuration management.
|
||||
|
||||
History
|
||||
=======
|
||||
|
||||
The original pppol2tp driver was introduced in 2.6.23 and provided
|
||||
L2TPv2 functionality (rfc2661). L2TPv2 is used to tunnel one or more PPP
|
||||
sessions over a UDP tunnel.
|
||||
|
||||
L2TPv3 (rfc3931) changes the protocol to allow different frame types
|
||||
to be passed over an L2TP tunnel by moving the PPP-specific parts of
|
||||
the protocol out of the core L2TP packet headers. Each frame type is
|
||||
known as a pseudowire type. Ethernet, PPP, HDLC, Frame Relay and ATM
|
||||
pseudowires for L2TP are defined in separate RFC standards. Another
|
||||
change for L2TPv3 is that it can be carried directly over IP with no
|
||||
UDP header (UDP is optional). It is also possible to create static
|
||||
unmanaged L2TPv3 tunnels manually without a control protocol
|
||||
(userspace daemon) to manage them.
|
||||
|
||||
To support L2TPv3, the original pppol2tp driver was split up to
|
||||
separate the L2TP and PPP functionality. Existing L2TPv2 userspace
|
||||
apps should be unaffected as the original pppol2tp sockets API is
|
||||
retained. L2TPv3, however, uses netlink to manage L2TPv3 tunnels and
|
||||
sessions.
|
||||
|
||||
Design
|
||||
======
|
||||
|
||||
The PPPoL2TP driver, drivers/net/pppol2tp.c, provides a mechanism by
|
||||
which PPP frames carried through an L2TP session are passed through
|
||||
the kernel's PPP subsystem. The standard PPP daemon, pppd, handles all
|
||||
PPP interaction with the peer. PPP network interfaces are created for
|
||||
each local PPP endpoint.
|
||||
The L2TP protocol separates control and data frames. The L2TP kernel
|
||||
drivers handle only L2TP data frames; control frames are always
|
||||
handled by userspace. L2TP control frames carry messages between L2TP
|
||||
clients/servers and are used to setup / teardown tunnels and
|
||||
sessions. An L2TP client or server is implemented in userspace.
|
||||
|
||||
The L2TP protocol http://www.faqs.org/rfcs/rfc2661.html defines L2TP
|
||||
control and data frames. L2TP control frames carry messages between
|
||||
L2TP clients/servers and are used to setup / teardown tunnels and
|
||||
sessions. An L2TP client or server is implemented in userspace and
|
||||
will use a regular UDP socket per tunnel. L2TP data frames carry PPP
|
||||
frames, which may be PPP control or PPP data. The kernel's PPP
|
||||
Each L2TP tunnel is implemented using a UDP or L2TPIP socket; L2TPIP
|
||||
provides L2TPv3 IP encapsulation (no UDP) and is implemented using a
|
||||
new l2tpip socket family. The tunnel socket is typically created by
|
||||
userspace, though for unmanaged L2TPv3 tunnels, the socket can also be
|
||||
created by the kernel. Each L2TP session (pseudowire) gets a network
|
||||
interface instance. In the case of PPP, these interfaces are created
|
||||
indirectly by pppd using a pppol2tp socket. In the case of ethernet,
|
||||
the netdevice is created upon a netlink request to create an L2TPv3
|
||||
ethernet pseudowire.
|
||||
|
||||
For PPP, the PPPoL2TP driver, net/l2tp/l2tp_ppp.c, provides a
|
||||
mechanism by which PPP frames carried through an L2TP session are
|
||||
passed through the kernel's PPP subsystem. The standard PPP daemon,
|
||||
pppd, handles all PPP interaction with the peer. PPP network
|
||||
interfaces are created for each local PPP endpoint. The kernel's PPP
|
||||
subsystem arranges for PPP control frames to be delivered to pppd,
|
||||
while data frames are forwarded as usual.
|
||||
|
||||
For ethernet, the L2TPETH driver, net/l2tp/l2tp_eth.c, implements a
|
||||
netdevice driver, managing virtual ethernet devices, one per
|
||||
pseudowire. These interfaces can be managed using standard Linux tools
|
||||
such as "ip" and "ifconfig". If only IP frames are passed over the
|
||||
tunnel, the interface can be given an IP addresses of itself and its
|
||||
peer. If non-IP frames are to be passed over the tunnel, the interface
|
||||
can be added to a bridge using brctl. All L2TP datapath protocol
|
||||
functions are handled by the L2TP core driver.
|
||||
|
||||
Each tunnel and session within a tunnel is assigned a unique tunnel_id
|
||||
and session_id. These ids are carried in the L2TP header of every
|
||||
control and data packet. The pppol2tp driver uses them to lookup
|
||||
internal tunnel and/or session contexts. Zero tunnel / session ids are
|
||||
treated specially - zero ids are never assigned to tunnels or sessions
|
||||
in the network. In the driver, the tunnel context keeps a pointer to
|
||||
the tunnel UDP socket. The session context keeps a pointer to the
|
||||
PPPoL2TP socket, as well as other data that lets the driver interface
|
||||
to the kernel PPP subsystem.
|
||||
control and data packet. (Actually, in L2TPv3, the tunnel_id isn't
|
||||
present in data frames - it is inferred from the IP connection on
|
||||
which the packet was received.) The L2TP driver uses the ids to lookup
|
||||
internal tunnel and/or session contexts to determine how to handle the
|
||||
packet. Zero tunnel / session ids are treated specially - zero ids are
|
||||
never assigned to tunnels or sessions in the network. In the driver,
|
||||
the tunnel context keeps a reference to the tunnel UDP or L2TPIP
|
||||
socket. The session context holds data that lets the driver interface
|
||||
to the kernel's network frame type subsystems, i.e. PPP, ethernet.
|
||||
|
||||
Note that the pppol2tp kernel driver handles only L2TP data frames;
|
||||
L2TP control frames are simply passed up to userspace in the UDP
|
||||
tunnel socket. The kernel handles all datapath aspects of the
|
||||
protocol, including data packet resequencing (if enabled).
|
||||
Userspace Programming
|
||||
=====================
|
||||
|
||||
There are a number of requirements on the userspace L2TP daemon in
|
||||
order to use the pppol2tp driver.
|
||||
For L2TPv2, there are a number of requirements on the userspace L2TP
|
||||
daemon in order to use the pppol2tp driver.
|
||||
|
||||
1. Use a UDP socket per tunnel.
|
||||
|
||||
|
|
@ -86,6 +137,35 @@ In addition to the standard PPP ioctls, a PPPIOCGL2TPSTATS is provided
|
|||
to retrieve tunnel and session statistics from the kernel using the
|
||||
PPPoX socket of the appropriate tunnel or session.
|
||||
|
||||
For L2TPv3, userspace must use the netlink API defined in
|
||||
include/linux/l2tp.h to manage tunnel and session contexts. The
|
||||
general procedure to create a new L2TP tunnel with one session is:-
|
||||
|
||||
1. Open a GENL socket using L2TP_GENL_NAME for configuring the kernel
|
||||
using netlink.
|
||||
|
||||
2. Create a UDP or L2TPIP socket for the tunnel.
|
||||
|
||||
3. Create a new L2TP tunnel using a L2TP_CMD_TUNNEL_CREATE
|
||||
request. Set attributes according to desired tunnel parameters,
|
||||
referencing the UDP or L2TPIP socket created in the previous step.
|
||||
|
||||
4. Create a new L2TP session in the tunnel using a
|
||||
L2TP_CMD_SESSION_CREATE request.
|
||||
|
||||
The tunnel and all of its sessions are closed when the tunnel socket
|
||||
is closed. The netlink API may also be used to delete sessions and
|
||||
tunnels. Configuration and status info may be set or read using netlink.
|
||||
|
||||
The L2TP driver also supports static (unmanaged) L2TPv3 tunnels. These
|
||||
are where there is no L2TP control message exchange with the peer to
|
||||
setup the tunnel; the tunnel is configured manually at each end of the
|
||||
tunnel. There is no need for an L2TP userspace application in this
|
||||
case -- the tunnel socket is created by the kernel and configured
|
||||
using parameters sent in the L2TP_CMD_TUNNEL_CREATE netlink
|
||||
request. The "ip" utility of iproute2 has commands for managing static
|
||||
L2TPv3 tunnels; do "ip l2tp help" for more information.
|
||||
|
||||
Debugging
|
||||
=========
|
||||
|
||||
|
|
@ -102,6 +182,69 @@ PPPOL2TP_MSG_CONTROL userspace - kernel interface
|
|||
PPPOL2TP_MSG_SEQ sequence numbers handling
|
||||
PPPOL2TP_MSG_DATA data packets
|
||||
|
||||
If enabled, files under a l2tp debugfs directory can be used to dump
|
||||
kernel state about L2TP tunnels and sessions. To access it, the
|
||||
debugfs filesystem must first be mounted.
|
||||
|
||||
# mount -t debugfs debugfs /debug
|
||||
|
||||
Files under the l2tp directory can then be accessed.
|
||||
|
||||
# cat /debug/l2tp/tunnels
|
||||
|
||||
The debugfs files should not be used by applications to obtain L2TP
|
||||
state information because the file format is subject to change. It is
|
||||
implemented to provide extra debug information to help diagnose
|
||||
problems.) Users should use the netlink API.
|
||||
|
||||
/proc/net/pppol2tp is also provided for backwards compaibility with
|
||||
the original pppol2tp driver. It lists information about L2TPv2
|
||||
tunnels and sessions only. Its use is discouraged.
|
||||
|
||||
Unmanaged L2TPv3 Tunnels
|
||||
========================
|
||||
|
||||
Some commercial L2TP products support unmanaged L2TPv3 ethernet
|
||||
tunnels, where there is no L2TP control protocol; tunnels are
|
||||
configured at each side manually. New commands are available in
|
||||
iproute2's ip utility to support this.
|
||||
|
||||
To create an L2TPv3 ethernet pseudowire between local host 192.168.1.1
|
||||
and peer 192.168.1.2, using IP addresses 10.5.1.1 and 10.5.1.2 for the
|
||||
tunnel endpoints:-
|
||||
|
||||
# modprobe l2tp_eth
|
||||
# modprobe l2tp_netlink
|
||||
|
||||
# ip l2tp add tunnel tunnel_id 1 peer_tunnel_id 1 udp_sport 5000 \
|
||||
udp_dport 5000 encap udp local 192.168.1.1 remote 192.168.1.2
|
||||
# ip l2tp add session tunnel_id 1 session_id 1 peer_session_id 1
|
||||
# ifconfig -a
|
||||
# ip addr add 10.5.1.2/32 peer 10.5.1.1/32 dev l2tpeth0
|
||||
# ifconfig l2tpeth0 up
|
||||
|
||||
Choose IP addresses to be the address of a local IP interface and that
|
||||
of the remote system. The IP addresses of the l2tpeth0 interface can be
|
||||
anything suitable.
|
||||
|
||||
Repeat the above at the peer, with ports, tunnel/session ids and IP
|
||||
addresses reversed. The tunnel and session IDs can be any non-zero
|
||||
32-bit number, but the values must be reversed at the peer.
|
||||
|
||||
Host 1 Host2
|
||||
udp_sport=5000 udp_sport=5001
|
||||
udp_dport=5001 udp_dport=5000
|
||||
tunnel_id=42 tunnel_id=45
|
||||
peer_tunnel_id=45 peer_tunnel_id=42
|
||||
session_id=128 session_id=5196755
|
||||
peer_session_id=5196755 peer_session_id=128
|
||||
|
||||
When done at both ends of the tunnel, it should be possible to send
|
||||
data over the network. e.g.
|
||||
|
||||
# ping 10.5.1.1
|
||||
|
||||
|
||||
Sample Userspace Code
|
||||
=====================
|
||||
|
||||
|
|
@ -158,12 +301,48 @@ Sample Userspace Code
|
|||
}
|
||||
return 0;
|
||||
|
||||
Miscellaneous
|
||||
============
|
||||
Internal Implementation
|
||||
=======================
|
||||
|
||||
The PPPoL2TP driver was developed as part of the OpenL2TP project by
|
||||
The driver keeps a struct l2tp_tunnel context per L2TP tunnel and a
|
||||
struct l2tp_session context for each session. The l2tp_tunnel is
|
||||
always associated with a UDP or L2TP/IP socket and keeps a list of
|
||||
sessions in the tunnel. The l2tp_session context keeps kernel state
|
||||
about the session. It has private data which is used for data specific
|
||||
to the session type. With L2TPv2, the session always carried PPP
|
||||
traffic. With L2TPv3, the session can also carry ethernet frames
|
||||
(ethernet pseudowire) or other data types such as ATM, HDLC or Frame
|
||||
Relay.
|
||||
|
||||
When a tunnel is first opened, the reference count on the socket is
|
||||
increased using sock_hold(). This ensures that the kernel socket
|
||||
cannot be removed while L2TP's data structures reference it.
|
||||
|
||||
Some L2TP sessions also have a socket (PPP pseudowires) while others
|
||||
do not (ethernet pseudowires). We can't use the socket reference count
|
||||
as the reference count for session contexts. The L2TP implementation
|
||||
therefore has its own internal reference counts on the session
|
||||
contexts.
|
||||
|
||||
To Do
|
||||
=====
|
||||
|
||||
Add L2TP tunnel switching support. This would route tunneled traffic
|
||||
from one L2TP tunnel into another. Specified in
|
||||
http://tools.ietf.org/html/draft-ietf-l2tpext-tunnel-switching-08
|
||||
|
||||
Add L2TPv3 VLAN pseudowire support.
|
||||
|
||||
Add L2TPv3 IP pseudowire support.
|
||||
|
||||
Add L2TPv3 ATM pseudowire support.
|
||||
|
||||
Miscellaneous
|
||||
=============
|
||||
|
||||
The L2TP drivers were developed as part of the OpenL2TP project by
|
||||
Katalix Systems Ltd. OpenL2TP is a full-featured L2TP client / server,
|
||||
designed from the ground up to have the L2TP datapath in the
|
||||
kernel. The project also implemented the pppol2tp plugin for pppd
|
||||
which allows pppd to use the kernel driver. Details can be found at
|
||||
http://openl2tp.sourceforge.net.
|
||||
http://www.openl2tp.org.
|
||||
|
|
|
|||
Загрузка…
Ссылка в новой задаче