HID: lg4ff - Add range setting support and sysfs interface
Wheel range of certain Logitech wheels - namely Driving Force GT, Driving Force Pro, G25 and G27 can be adjusted. Minimu is 40 degrees, maximum 900. DFGT, G25 and G27 all use a common command, DFP uses another one. Range can be set from userspace by writing to "/sys/module/hid_logitech/drivers/hid:logitech/<dev>range". The driver use list to store range of each connected wheel; it's not possible to use driver_data in hid_device struct as it's already b hig-lg driver. Signed-off-by: Michal Malý <madcatxster@gmail.com> Signed-off-by: Simon Wood <simon@mungewell.org> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
This commit is contained in:
Родитель
96440c8a00
Коммит
30bb75d71b
|
@ -406,6 +406,15 @@ err_free:
|
|||
return ret;
|
||||
}
|
||||
|
||||
static void lg_remove(struct hid_device *hdev)
|
||||
{
|
||||
unsigned long quirks = (unsigned long)hid_get_drvdata(hdev);
|
||||
if(quirks & LG_FF4)
|
||||
lg4ff_deinit(hdev);
|
||||
|
||||
hid_hw_stop(hdev);
|
||||
}
|
||||
|
||||
static const struct hid_device_id lg_devices[] = {
|
||||
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_MX3000_RECEIVER),
|
||||
.driver_data = LG_RDESC | LG_WIRELESS },
|
||||
|
@ -481,6 +490,7 @@ static struct hid_driver lg_driver = {
|
|||
.input_mapped = lg_input_mapped,
|
||||
.event = lg_event,
|
||||
.probe = lg_probe,
|
||||
.remove = lg_remove,
|
||||
};
|
||||
|
||||
static int __init lg_init(void)
|
||||
|
|
|
@ -21,8 +21,10 @@ static inline int lg3ff_init(struct hid_device *hdev) { return -1; }
|
|||
|
||||
#ifdef CONFIG_LOGIWII_FF
|
||||
int lg4ff_init(struct hid_device *hdev);
|
||||
int lg4ff_deinit(struct hid_device *hdev);
|
||||
#else
|
||||
static inline int lg4ff_init(struct hid_device *hdev) { return -1; }
|
||||
static inline int lg4ff_deinit(struct hid_device *hdev) { return -1; }
|
||||
#endif
|
||||
|
||||
#endif
|
||||
|
|
|
@ -42,6 +42,29 @@
|
|||
#define G27_REV_MAJ 0x12
|
||||
#define G27_REV_MIN 0x38
|
||||
|
||||
#define to_hid_device(pdev) container_of(pdev, struct hid_device, dev)
|
||||
|
||||
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, u16 range);
|
||||
static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range);
|
||||
static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf);
|
||||
static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count);
|
||||
|
||||
static DEVICE_ATTR(range, S_IRWXU | S_IRWXG | S_IRWXO, lg4ff_range_show, lg4ff_range_store);
|
||||
|
||||
static bool list_inited;
|
||||
|
||||
struct lg4ff_device_entry {
|
||||
char *device_id; /* Use name in respective kobject structure's address as the ID */
|
||||
__u16 range;
|
||||
__u16 min_range;
|
||||
__u16 max_range;
|
||||
__u8 leds;
|
||||
struct list_head list;
|
||||
void (*set_range)(struct hid_device *hid, u16 range);
|
||||
};
|
||||
|
||||
static struct lg4ff_device_entry device_list;
|
||||
|
||||
static const signed short lg4ff_wheel_effects[] = {
|
||||
FF_CONSTANT,
|
||||
FF_AUTOCENTER,
|
||||
|
@ -53,17 +76,18 @@ struct lg4ff_wheel {
|
|||
const signed short *ff_effects;
|
||||
const __u16 min_range;
|
||||
const __u16 max_range;
|
||||
void (*set_range)(struct hid_device *hid, u16 range);
|
||||
};
|
||||
|
||||
static const struct lg4ff_wheel lg4ff_devices[] = {
|
||||
{USB_DEVICE_ID_LOGITECH_WHEEL, lg4ff_wheel_effects, 40, 270},
|
||||
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL, lg4ff_wheel_effects, 40, 270},
|
||||
{USB_DEVICE_ID_LOGITECH_DFP_WHEEL, lg4ff_wheel_effects, 40, 900},
|
||||
{USB_DEVICE_ID_LOGITECH_G25_WHEEL, lg4ff_wheel_effects, 40, 900},
|
||||
{USB_DEVICE_ID_LOGITECH_DFGT_WHEEL, lg4ff_wheel_effects, 40, 900},
|
||||
{USB_DEVICE_ID_LOGITECH_G27_WHEEL, lg4ff_wheel_effects, 40, 900},
|
||||
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270},
|
||||
{USB_DEVICE_ID_LOGITECH_WII_WHEEL, lg4ff_wheel_effects, 40, 270}
|
||||
{USB_DEVICE_ID_LOGITECH_WHEEL, lg4ff_wheel_effects, 40, 270, NULL},
|
||||
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL, lg4ff_wheel_effects, 40, 270, NULL},
|
||||
{USB_DEVICE_ID_LOGITECH_DFP_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_dfp},
|
||||
{USB_DEVICE_ID_LOGITECH_G25_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
|
||||
{USB_DEVICE_ID_LOGITECH_DFGT_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
|
||||
{USB_DEVICE_ID_LOGITECH_G27_WHEEL, lg4ff_wheel_effects, 40, 900, hid_lg4ff_set_range_g25},
|
||||
{USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2, lg4ff_wheel_effects, 40, 270, NULL},
|
||||
{USB_DEVICE_ID_LOGITECH_WII_WHEEL, lg4ff_wheel_effects, 40, 270, NULL}
|
||||
};
|
||||
|
||||
struct lg4ff_native_cmd {
|
||||
|
@ -106,8 +130,7 @@ static const struct lg4ff_usb_revision lg4ff_revs[] = {
|
|||
{G27_REV_MAJ, G27_REV_MIN, &native_g27}, /* G27 */
|
||||
};
|
||||
|
||||
static int hid_lg4ff_play(struct input_dev *dev, void *data,
|
||||
struct ff_effect *effect)
|
||||
static int hid_lg4ff_play(struct input_dev *dev, void *data, struct ff_effect *effect)
|
||||
{
|
||||
struct hid_device *hid = input_get_drvdata(dev);
|
||||
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
|
||||
|
@ -151,6 +174,77 @@ static void hid_lg4ff_set_autocenter(struct input_dev *dev, u16 magnitude)
|
|||
usbhid_submit_report(hid, report, USB_DIR_OUT);
|
||||
}
|
||||
|
||||
/* Sends command to set range compatible with G25/G27/Driving Force GT */
|
||||
static void hid_lg4ff_set_range_g25(struct hid_device *hid, u16 range)
|
||||
{
|
||||
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
|
||||
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
|
||||
dbg_hid("G25/G27/DFGT: setting range to %u\n", range);
|
||||
|
||||
report->field[0]->value[0] = 0xf8;
|
||||
report->field[0]->value[1] = 0x81;
|
||||
report->field[0]->value[2] = range & 0x00ff;
|
||||
report->field[0]->value[3] = (range & 0xff00) >> 8;
|
||||
report->field[0]->value[4] = 0x00;
|
||||
report->field[0]->value[5] = 0x00;
|
||||
report->field[0]->value[6] = 0x00;
|
||||
|
||||
usbhid_submit_report(hid, report, USB_DIR_OUT);
|
||||
}
|
||||
|
||||
/* Sends commands to set range compatible with Driving Force Pro wheel */
|
||||
static void hid_lg4ff_set_range_dfp(struct hid_device *hid, __u16 range)
|
||||
{
|
||||
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
|
||||
struct hid_report *report = list_entry(report_list->next, struct hid_report, list);
|
||||
int start_left, start_right, full_range;
|
||||
dbg_hid("Driving Force Pro: setting range to %u\n", range);
|
||||
|
||||
/* Prepare "coarse" limit command */
|
||||
report->field[0]->value[0] = 0xf8;
|
||||
report->field[0]->value[1] = 0x00; /* Set later */
|
||||
report->field[0]->value[2] = 0x00;
|
||||
report->field[0]->value[3] = 0x00;
|
||||
report->field[0]->value[4] = 0x00;
|
||||
report->field[0]->value[5] = 0x00;
|
||||
report->field[0]->value[6] = 0x00;
|
||||
|
||||
if (range > 200) {
|
||||
report->field[0]->value[1] = 0x03;
|
||||
full_range = 900;
|
||||
} else {
|
||||
report->field[0]->value[1] = 0x02;
|
||||
full_range = 200;
|
||||
}
|
||||
usbhid_submit_report(hid, report, USB_DIR_OUT);
|
||||
|
||||
/* Prepare "fine" limit command */
|
||||
report->field[0]->value[0] = 0x81;
|
||||
report->field[0]->value[1] = 0x0b;
|
||||
report->field[0]->value[2] = 0x00;
|
||||
report->field[0]->value[3] = 0x00;
|
||||
report->field[0]->value[4] = 0x00;
|
||||
report->field[0]->value[5] = 0x00;
|
||||
report->field[0]->value[6] = 0x00;
|
||||
|
||||
if (range == 200 || range == 900) { /* Do not apply any fine limit */
|
||||
usbhid_submit_report(hid, report, USB_DIR_OUT);
|
||||
return;
|
||||
}
|
||||
|
||||
/* Construct fine limit command */
|
||||
start_left = (((full_range - range + 1) * 2047) / full_range);
|
||||
start_right = 0xfff - start_left;
|
||||
|
||||
report->field[0]->value[2] = start_left >> 4;
|
||||
report->field[0]->value[3] = start_right >> 4;
|
||||
report->field[0]->value[4] = 0xff;
|
||||
report->field[0]->value[5] = (start_right & 0xe) << 4 | (start_left & 0xe);
|
||||
report->field[0]->value[6] = 0xff;
|
||||
|
||||
usbhid_submit_report(hid, report, USB_DIR_OUT);
|
||||
}
|
||||
|
||||
static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_native_cmd *cmd)
|
||||
{
|
||||
struct list_head *report_list = &hid->report_enum[HID_OUTPUT_REPORT].report_list;
|
||||
|
@ -166,6 +260,60 @@ static void hid_lg4ff_switch_native(struct hid_device *hid, const struct lg4ff_n
|
|||
}
|
||||
}
|
||||
|
||||
/* Read current range and display it in terminal */
|
||||
static ssize_t lg4ff_range_show(struct device *dev, struct device_attribute *attr, char *buf)
|
||||
{
|
||||
struct lg4ff_device_entry *entry = 0;
|
||||
struct list_head *h;
|
||||
struct hid_device *hid = to_hid_device(dev);
|
||||
size_t count;
|
||||
|
||||
list_for_each(h, &device_list.list) {
|
||||
entry = list_entry(h, struct lg4ff_device_entry, list);
|
||||
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
|
||||
break;
|
||||
}
|
||||
if (h == &device_list.list) {
|
||||
dbg_hid("Device not found!");
|
||||
return 0;
|
||||
}
|
||||
|
||||
count = scnprintf(buf, PAGE_SIZE, "%u\n", entry->range);
|
||||
return count;
|
||||
}
|
||||
|
||||
/* Set range to user specified value, call appropriate function
|
||||
* according to the type of the wheel */
|
||||
static ssize_t lg4ff_range_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
|
||||
{
|
||||
struct lg4ff_device_entry *entry = 0;
|
||||
struct list_head *h;
|
||||
struct hid_device *hid = to_hid_device(dev);
|
||||
__u16 range = simple_strtoul(buf, NULL, 10);
|
||||
|
||||
list_for_each(h, &device_list.list) {
|
||||
entry = list_entry(h, struct lg4ff_device_entry, list);
|
||||
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0)
|
||||
break;
|
||||
}
|
||||
if (h == &device_list.list) {
|
||||
dbg_hid("Device not found!");
|
||||
return count;
|
||||
}
|
||||
|
||||
if (range == 0)
|
||||
range = entry->max_range;
|
||||
|
||||
/* Check if the wheel supports range setting
|
||||
* and that the range is within limits for the wheel */
|
||||
if (entry->set_range != NULL && range >= entry->min_range && range <= entry->max_range) {
|
||||
entry->set_range(hid, range);
|
||||
entry->range = range;
|
||||
}
|
||||
|
||||
return count;
|
||||
}
|
||||
|
||||
int lg4ff_init(struct hid_device *hid)
|
||||
{
|
||||
struct hid_input *hidinput = list_entry(hid->inputs.next, struct hid_input, list);
|
||||
|
@ -173,7 +321,8 @@ int lg4ff_init(struct hid_device *hid)
|
|||
struct input_dev *dev = hidinput->input;
|
||||
struct hid_report *report;
|
||||
struct hid_field *field;
|
||||
struct usb_device_descriptor *udesc = 0;
|
||||
struct lg4ff_device_entry *entry;
|
||||
struct usb_device_descriptor *udesc;
|
||||
int error, i, j;
|
||||
__u16 bcdDevice, rev_maj, rev_min;
|
||||
|
||||
|
@ -195,7 +344,7 @@ int lg4ff_init(struct hid_device *hid)
|
|||
hid_err(hid, "NULL field\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
|
||||
/* Check what wheel has been connected */
|
||||
for (i = 0; i < ARRAY_SIZE(lg4ff_devices); i++) {
|
||||
if (hid->product == lg4ff_devices[i].product_id) {
|
||||
|
@ -244,7 +393,66 @@ int lg4ff_init(struct hid_device *hid)
|
|||
if (test_bit(FF_AUTOCENTER, dev->ffbit))
|
||||
dev->ff->set_autocenter = hid_lg4ff_set_autocenter;
|
||||
|
||||
/* Initialize device_list if this is the first device to handle by lg4ff */
|
||||
if (!list_inited) {
|
||||
INIT_LIST_HEAD(&device_list.list);
|
||||
list_inited = 1;
|
||||
}
|
||||
|
||||
/* Add the device to device_list */
|
||||
entry = (struct lg4ff_device_entry *)kzalloc(sizeof(struct lg4ff_device_entry), GFP_KERNEL);
|
||||
if (!entry) {
|
||||
hid_err(hid, "Cannot add device, insufficient memory.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
entry->device_id = (char *)kzalloc(strlen((&hid->dev)->kobj.name) + 1, GFP_KERNEL);
|
||||
if (!entry->device_id) {
|
||||
hid_err(hid, "Cannot set device_id, insufficient memory.\n");
|
||||
return -ENOMEM;
|
||||
}
|
||||
strcpy(entry->device_id, (&hid->dev)->kobj.name);
|
||||
entry->min_range = lg4ff_devices[i].min_range;
|
||||
entry->max_range = lg4ff_devices[i].max_range;
|
||||
entry->set_range = lg4ff_devices[i].set_range;
|
||||
list_add(&entry->list, &device_list.list);
|
||||
|
||||
/* Create sysfs interface */
|
||||
error = device_create_file(&hid->dev, &dev_attr_range);
|
||||
if (error)
|
||||
return error;
|
||||
dbg_hid("sysfs interface created\n");
|
||||
|
||||
/* Set the maximum range to start with */
|
||||
entry->range = entry->max_range;
|
||||
if (entry->set_range != NULL)
|
||||
entry->set_range(hid, entry->range);
|
||||
|
||||
hid_info(hid, "Force feedback for Logitech Speed Force Wireless by Simon Wood <simon@mungewell.org>\n");
|
||||
return 0;
|
||||
}
|
||||
|
||||
int lg4ff_deinit(struct hid_device *hid)
|
||||
{
|
||||
bool found = 0;
|
||||
struct lg4ff_device_entry *entry;
|
||||
struct list_head *h, *g;
|
||||
list_for_each_safe(h, g, &device_list.list) {
|
||||
entry = list_entry(h, struct lg4ff_device_entry, list);
|
||||
if (strcmp(entry->device_id, (&hid->dev)->kobj.name) == 0) {
|
||||
list_del(h);
|
||||
kfree(entry->device_id);
|
||||
kfree(entry);
|
||||
found = 1;
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
if (!found) {
|
||||
dbg_hid("Device entry not found!\n");
|
||||
return -1;
|
||||
}
|
||||
|
||||
device_remove_file(&hid->dev, &dev_attr_range);
|
||||
dbg_hid("Device successfully unregistered\n");
|
||||
return 0;
|
||||
}
|
||||
|
|
Загрузка…
Ссылка в новой задаче