microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

Merge branches 'ftrace', 'gic', 'io', 'kexec', 'mod', 'sa11x0', 'sh' and 'versatile' into devel

This commit is contained in:
Russell King 2011-01-05 18:08:10 +00:00
Родитель 3c0eee3fe6 ed60453fa8 ac61d143ff 28257f7fde b230653132 50005a8deb cf562b4a55 3d09fbcd26 8a9618f5df
Коммит 31edf274f9
84 изменённых файлов: 1614 добавлений и 755 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

22
arch/arm/Kconfig
Просмотреть файл

@ -23,6 +23,7 @@ config ARM
select PERF_USE_VMALLOC
select HAVE_REGS_AND_STACK_ACCESS_API
select HAVE_HW_BREAKPOINT if (PERF_EVENTS && (CPU_V6 || CPU_V7))
select HAVE_C_RECORDMCOUNT
help
The ARM series is a line of low-power-consumption RISC chip designs
licensed by ARM Ltd and targeted at embedded applications and
@ -1164,7 +1165,7 @@ config ISA_DMA_API
bool
config PCI
bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX
bool "PCI support" if ARCH_INTEGRATOR_AP || ARCH_VERSATILE_PB || ARCH_IXP4XX || ARCH_KS8695 || MACH_ARMCORE || ARCH_CNS3XXX || SA1100_NANOENGINE
help
Find out whether you have a PCI motherboard. PCI is the name of a
bus system, i.e. the way the CPU talks to the other stuff inside
@ -1175,6 +1176,12 @@ config PCI_DOMAINS
bool
depends on PCI
config PCI_NANOENGINE
bool "BSE nanoEngine PCI support"
depends on SA1100_NANOENGINE
help
Enable PCI on the BSE nanoEngine board.
config PCI_SYSCALL
def_bool PCI
@ -1650,6 +1657,19 @@ config ATAGS_PROC
Should the atags used to boot the kernel be exported in an "atags"
file in procfs. Useful with kexec.
config CRASH_DUMP
bool "Build kdump crash kernel (EXPERIMENTAL)"
depends on EXPERIMENTAL
help
Generate crash dump after being started by kexec. This should
be normally only set in special crash dump kernels which are
loaded in the main kernel with kexec-tools into a specially
reserved region and then later executed after a crash by
kdump/kexec. The crash dump kernel must be compiled to a
memory address not used by the main kernel
For more details see Documentation/kdump/kdump.txt
config AUTO_ZRELADDR
bool "Auto calculation of the decompressed kernel image address"
depends on !ZBOOT_ROM && !ARCH_U300

4
arch/arm/boot/compressed/Makefile
Просмотреть файл

@ -45,6 +45,10 @@ else
endif
endif
ifeq ($(CONFIG_ARCH_SHMOBILE),y)
OBJS += head-shmobile.o
endif
#
# We now have a PIC decompressor implementation. Decompressors running
# from RAM should not define ZTEXTADDR. Decompressors running directly

53
arch/arm/boot/compressed/head-shmobile.S Normal file
Просмотреть файл

@ -0,0 +1,53 @@
/*
* The head-file for SH-Mobile ARM platforms
*
* Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
* Simon Horman <horms@verge.net.au>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; version 2 of the License.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
*/
#ifdef CONFIG_ZBOOT_ROM
.section ".start", "ax"
/* load board-specific initialization code */
#include <mach/zboot.h>
b 1f
__atags:@ tag #1
.long 12 @ tag->hdr.size = tag_size(tag_core);
.long 0x54410001 @ tag->hdr.tag = ATAG_CORE;
.long 0 @ tag->u.core.flags = 0;
.long 0 @ tag->u.core.pagesize = 0;
.long 0 @ tag->u.core.rootdev = 0;
@ tag #2
.long 8 @ tag->hdr.size = tag_size(tag_mem32);
.long 0x54410002 @ tag->hdr.tag = ATAG_MEM;
.long CONFIG_MEMORY_SIZE @ tag->u.mem.size = CONFIG_MEMORY_SIZE;
.long CONFIG_MEMORY_START @ @ tag->u.mem.start = CONFIG_MEMORY_START;
@ tag #3
.long 0 @ tag->hdr.size = 0
.long 0 @ tag->hdr.tag = ATAG_NONE;
1:
/* Set board ID necessary for boot */
ldr r7, 1f @ Set machine type register
adr r8, __atags @ Set atag register
b 2f
1 : .long MACH_TYPE
2 :
#endif /* CONFIG_ZBOOT_ROM */

1
arch/arm/common/Makefile
Просмотреть файл

@ -17,3 +17,4 @@ obj-$(CONFIG_ARCH_IXP2000) += uengine.o
obj-$(CONFIG_ARCH_IXP23XX) += uengine.o
obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o
obj-$(CONFIG_COMMON_CLKDEV) += clkdev.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o

69
arch/arm/common/gic.c
Просмотреть файл

@ -35,6 +35,9 @@
static DEFINE_SPINLOCK(irq_controller_lock);
/* Address of GIC 0 CPU interface */
void __iomem *gic_cpu_base_addr __read_mostly;
struct gic_chip_data {
unsigned int irq_offset;
void __iomem *dist_base;
@ -45,7 +48,7 @@ struct gic_chip_data {
#define MAX_GIC_NR 1
#endif
static struct gic_chip_data gic_data[MAX_GIC_NR];
static struct gic_chip_data gic_data[MAX_GIC_NR] __read_mostly;
static inline void __iomem *gic_dist_base(unsigned int irq)
{
@ -213,21 +216,16 @@ void __init gic_cascade_irq(unsigned int gic_nr, unsigned int irq)
set_irq_chained_handler(irq, gic_handle_cascade_irq);
}
void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
unsigned int irq_start)
static void __init gic_dist_init(struct gic_chip_data *gic,
unsigned int irq_start)
{
unsigned int gic_irqs, irq_limit, i;
void __iomem *base = gic->dist_base;
u32 cpumask = 1 << smp_processor_id();
if (gic_nr >= MAX_GIC_NR)
BUG();
cpumask |= cpumask << 8;
cpumask |= cpumask << 16;
gic_data[gic_nr].dist_base = base;
gic_data[gic_nr].irq_offset = (irq_start - 1) & ~31;
writel(0, base + GIC_DIST_CTRL);
/*
@ -267,7 +265,7 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
/*
* Limit number of interrupts registered to the platform maximum
*/
irq_limit = gic_data[gic_nr].irq_offset + gic_irqs;
irq_limit = gic->irq_offset + gic_irqs;
if (WARN_ON(irq_limit > NR_IRQS))
irq_limit = NR_IRQS;
@ -276,7 +274,7 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
*/
for (i = irq_start; i < irq_limit; i++) {
set_irq_chip(i, &gic_chip);
set_irq_chip_data(i, &gic_data[gic_nr]);
set_irq_chip_data(i, gic);
set_irq_handler(i, handle_level_irq);
set_irq_flags(i, IRQF_VALID | IRQF_PROBE);
}
@ -284,19 +282,12 @@ void __init gic_dist_init(unsigned int gic_nr, void __iomem *base,
writel(1, base + GIC_DIST_CTRL);
}
void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
static void __cpuinit gic_cpu_init(struct gic_chip_data *gic)
{
void __iomem *dist_base;
void __iomem *dist_base = gic->dist_base;
void __iomem *base = gic->cpu_base;
int i;
if (gic_nr >= MAX_GIC_NR)
BUG();
dist_base = gic_data[gic_nr].dist_base;
BUG_ON(!dist_base);
gic_data[gic_nr].cpu_base = base;
/*
* Deal with the banked PPI and SGI interrupts - disable all
* PPI interrupts, ensure all SGI interrupts are enabled.
@ -314,6 +305,42 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
writel(1, base + GIC_CPU_CTRL);
}
void __init gic_init(unsigned int gic_nr, unsigned int irq_start,
void __iomem *dist_base, void __iomem *cpu_base)
{
struct gic_chip_data *gic;
BUG_ON(gic_nr >= MAX_GIC_NR);
gic = &gic_data[gic_nr];
gic->dist_base = dist_base;
gic->cpu_base = cpu_base;
gic->irq_offset = (irq_start - 1) & ~31;
if (gic_nr == 0)
gic_cpu_base_addr = cpu_base;
gic_dist_init(gic, irq_start);
gic_cpu_init(gic);
}
void __cpuinit gic_secondary_init(unsigned int gic_nr)
{
BUG_ON(gic_nr >= MAX_GIC_NR);
gic_cpu_init(&gic_data[gic_nr]);
}
void __cpuinit gic_enable_ppi(unsigned int irq)
{
unsigned long flags;
local_irq_save(flags);
irq_to_desc(irq)->status |= IRQ_NOPROBE;
gic_unmask_irq(irq);
local_irq_restore(flags);
}
#ifdef CONFIG_SMP
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{

4
arch/arm/plat-versatile/timer-sp.c → arch/arm/common/timer-sp.c
Просмотреть файл

@ -1,5 +1,5 @@
/*
* linux/arch/arm/plat-versatile/timer-sp.c
* linux/arch/arm/common/timer-sp.c
*
* Copyright (C) 1999 - 2003 ARM Limited
* Copyright (C) 2000 Deep Blue Solutions Ltd
@ -26,8 +26,6 @@
#include <asm/hardware/arm_timer.h>
#include <plat/timer-sp.h>
/*
* These timers are currently always setup to be clocked at 1MHz.
*/

2
arch/arm/include/asm/elf.h
Просмотреть файл

@ -99,6 +99,8 @@ struct elf32_hdr;
extern int elf_check_arch(const struct elf32_hdr *);
#define elf_check_arch elf_check_arch
#define vmcore_elf64_check_arch(x) (0)
extern int arm_elf_read_implies_exec(const struct elf32_hdr *, int);
#define elf_read_implies_exec(ex,stk) arm_elf_read_implies_exec(&(ex), stk)

75
arch/arm/include/asm/hardware/entry-macro-gic.S Normal file
Просмотреть файл

@ -0,0 +1,75 @@
/*
* arch/arm/include/asm/hardware/entry-macro-gic.S
*
* Low-level IRQ helper macros for GIC
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <asm/hardware/gic.h>
#ifndef HAVE_GET_IRQNR_PREAMBLE
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
#endif
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK]
/* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm

7
arch/arm/include/asm/hardware/gic.h
Просмотреть файл

@ -33,10 +33,13 @@
#define GIC_DIST_SOFTINT 0xf00
#ifndef __ASSEMBLY__
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
extern void __iomem *gic_cpu_base_addr;
void gic_init(unsigned int, unsigned int, void __iomem *, void __iomem *);
void gic_secondary_init(unsigned int);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
void gic_enable_ppi(unsigned int);
#endif
#endif

0
arch/arm/plat-versatile/include/plat/timer-sp.h → arch/arm/include/asm/hardware/timer-sp.h
Просмотреть файл

13
arch/arm/include/asm/io.h
Просмотреть файл

@ -241,18 +241,15 @@ extern void _memset_io(volatile void __iomem *, int, size_t);
*
*/
#ifndef __arch_ioremap
#define ioremap(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_nocache(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE)
#define ioremap_cached(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_CACHED)
#define ioremap_wc(cookie,size) __arm_ioremap(cookie, size, MT_DEVICE_WC)
#define iounmap(cookie) __iounmap(cookie)
#else
#define __arch_ioremap __arm_ioremap
#define __arch_iounmap __iounmap
#endif
#define ioremap(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_nocache(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE)
#define ioremap_cached(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_CACHED)
#define ioremap_wc(cookie,size) __arch_ioremap((cookie), (size), MT_DEVICE_WC)
#define iounmap(cookie) __arch_iounmap(cookie)
#endif
#define iounmap __arch_iounmap
/*
* io{read,write}{8,16,32} macros

18
arch/arm/include/asm/kexec.h
Просмотреть файл

@ -33,10 +33,20 @@ static inline void crash_setup_regs(struct pt_regs *newregs,
if (oldregs) {
memcpy(newregs, oldregs, sizeof(*newregs));
} else {
__asm__ __volatile__ ("stmia %0, {r0 - r15}"
: : "r" (&newregs->ARM_r0));
__asm__ __volatile__ ("mrs %0, cpsr"
: "=r" (newregs->ARM_cpsr));
__asm__ __volatile__ (
"stmia %[regs_base], {r0-r12}\n\t"
"mov %[_ARM_sp], sp\n\t"
"str lr, %[_ARM_lr]\n\t"
"adr %[_ARM_pc], 1f\n\t"
"mrs %[_ARM_cpsr], cpsr\n\t"
"1:"
: [_ARM_pc] "=r" (newregs->ARM_pc),
[_ARM_cpsr] "=r" (newregs->ARM_cpsr),
[_ARM_sp] "=r" (newregs->ARM_sp),
[_ARM_lr] "=o" (newregs->ARM_lr)
: [regs_base] "r" (&newregs->ARM_r0)
: "memory"
);
}
}

17
arch/arm/include/asm/module.h
Просмотреть файл

@ -8,11 +8,6 @@
struct unwind_table;
#ifdef CONFIG_ARM_UNWIND
struct arm_unwind_mapping {
Elf_Shdr *unw_sec;
Elf_Shdr *sec_text;
struct unwind_table *unwind;
};
enum {
ARM_SEC_INIT,
ARM_SEC_DEVINIT,
@ -21,14 +16,14 @@ enum {
ARM_SEC_DEVEXIT,
ARM_SEC_MAX,
};
struct mod_arch_specific {
struct arm_unwind_mapping map[ARM_SEC_MAX];
};
#else
struct mod_arch_specific {
};
#endif
struct mod_arch_specific {
#ifdef CONFIG_ARM_UNWIND
struct unwind_table *unwind[ARM_SEC_MAX];
#endif
};
/*
* Include the ARM architecture version.
*/

30
arch/arm/kernel/machine_kexec.c
Просмотреть файл

@ -23,6 +23,8 @@ extern unsigned long kexec_indirection_page;
extern unsigned long kexec_mach_type;
extern unsigned long kexec_boot_atags;
static atomic_t waiting_for_crash_ipi;
/*
* Provide a dummy crash_notes definition while crash dump arrives to arm.
* This prevents breakage of crash_notes attribute in kernel/ksysfs.c.
@ -37,9 +39,37 @@ void machine_kexec_cleanup(struct kimage *image)
{
}
void machine_crash_nonpanic_core(void *unused)
{
struct pt_regs regs;
crash_setup_regs(&regs, NULL);
printk(KERN_DEBUG "CPU %u will stop doing anything useful since another CPU has crashed\n",
smp_processor_id());
crash_save_cpu(&regs, smp_processor_id());
flush_cache_all();
atomic_dec(&waiting_for_crash_ipi);
while (1)
cpu_relax();
}
void machine_crash_shutdown(struct pt_regs *regs)
{
unsigned long msecs;
local_irq_disable();
atomic_set(&waiting_for_crash_ipi, num_online_cpus() - 1);
smp_call_function(machine_crash_nonpanic_core, NULL, false);
msecs = 1000; /* Wait at most a second for the other cpus to stop */
while ((atomic_read(&waiting_for_crash_ipi) > 0) && msecs) {
mdelay(1);
msecs--;
}
if (atomic_read(&waiting_for_crash_ipi) > 0)
printk(KERN_WARNING "Non-crashing CPUs did not react to IPI\n");
crash_save_cpu(regs, smp_processor_id());
printk(KERN_INFO "Loading crashdump kernel...\n");

109
arch/arm/kernel/module.c
Просмотреть файл

@ -67,35 +67,6 @@ int module_frob_arch_sections(Elf_Ehdr *hdr,
char *secstrings,
struct module *mod)
{
#ifdef CONFIG_ARM_UNWIND
Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
struct arm_unwind_mapping *maps = mod->arch.map;
for (s = sechdrs; s < sechdrs_end; s++) {
char const *secname = secstrings + s->sh_name;
if (strcmp(".ARM.exidx.init.text", secname) == 0)
maps[ARM_SEC_INIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].unw_sec = s;
else if (strcmp(".ARM.exidx", secname) == 0)
maps[ARM_SEC_CORE].unw_sec = s;
else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
maps[ARM_SEC_EXIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].unw_sec = s;
else if (strcmp(".init.text", secname) == 0)
maps[ARM_SEC_INIT].sec_text = s;
else if (strcmp(".devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].sec_text = s;
else if (strcmp(".text", secname) == 0)
maps[ARM_SEC_CORE].sec_text = s;
else if (strcmp(".exit.text", secname) == 0)
maps[ARM_SEC_EXIT].sec_text = s;
else if (strcmp(".devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].sec_text = s;
}
#endif
return 0;
}
@ -300,41 +271,69 @@ apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
return -ENOEXEC;
}
struct mod_unwind_map {
const Elf_Shdr *unw_sec;
const Elf_Shdr *txt_sec;
};
int module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *mod)
{
#ifdef CONFIG_ARM_UNWIND
static void register_unwind_tables(struct module *mod)
{
const char *secstrs = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset;
const Elf_Shdr *s, *sechdrs_end = sechdrs + hdr->e_shnum;
struct mod_unwind_map maps[ARM_SEC_MAX];
int i;
for (i = 0; i < ARM_SEC_MAX; ++i) {
struct arm_unwind_mapping *map = &mod->arch.map[i];
if (map->unw_sec && map->sec_text)
map->unwind = unwind_table_add(map->unw_sec->sh_addr,
map->unw_sec->sh_size,
map->sec_text->sh_addr,
map->sec_text->sh_size);
memset(maps, 0, sizeof(maps));
for (s = sechdrs; s < sechdrs_end; s++) {
const char *secname = secstrs + s->sh_name;
if (!(s->sh_flags & SHF_ALLOC))
continue;
if (strcmp(".ARM.exidx.init.text", secname) == 0)
maps[ARM_SEC_INIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].unw_sec = s;
else if (strcmp(".ARM.exidx", secname) == 0)
maps[ARM_SEC_CORE].unw_sec = s;
else if (strcmp(".ARM.exidx.exit.text", secname) == 0)
maps[ARM_SEC_EXIT].unw_sec = s;
else if (strcmp(".ARM.exidx.devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].unw_sec = s;
else if (strcmp(".init.text", secname) == 0)
maps[ARM_SEC_INIT].txt_sec = s;
else if (strcmp(".devinit.text", secname) == 0)
maps[ARM_SEC_DEVINIT].txt_sec = s;
else if (strcmp(".text", secname) == 0)
maps[ARM_SEC_CORE].txt_sec = s;
else if (strcmp(".exit.text", secname) == 0)
maps[ARM_SEC_EXIT].txt_sec = s;
else if (strcmp(".devexit.text", secname) == 0)
maps[ARM_SEC_DEVEXIT].txt_sec = s;
}
}
static void unregister_unwind_tables(struct module *mod)
{
int i = ARM_SEC_MAX;
while (--i >= 0)
unwind_table_del(mod->arch.map[i].unwind);
}
#else
static inline void register_unwind_tables(struct module *mod) { }
static inline void unregister_unwind_tables(struct module *mod) { }
for (i = 0; i < ARM_SEC_MAX; i++)
if (maps[i].unw_sec && maps[i].txt_sec)
mod->arch.unwind[i] =
unwind_table_add(maps[i].unw_sec->sh_addr,
maps[i].unw_sec->sh_size,
maps[i].txt_sec->sh_addr,
maps[i].txt_sec->sh_size);
#endif
int
module_finalize(const Elf32_Ehdr *hdr, const Elf_Shdr *sechdrs,
struct module *module)
{
register_unwind_tables(module);
return 0;
}
void
module_arch_cleanup(struct module *mod)
{
unregister_unwind_tables(mod);
#ifdef CONFIG_ARM_UNWIND
int i;
for (i = 0; i < ARM_SEC_MAX; i++)
if (mod->arch.unwind[i])
unwind_table_del(mod->arch.unwind[i]);
#endif
}

7
arch/arm/kernel/smp_twd.c
Просмотреть файл

@ -127,8 +127,6 @@ static void __cpuinit twd_calibrate_rate(void)
*/
void __cpuinit twd_timer_setup(struct clock_event_device *clk)
{
unsigned long flags;
twd_calibrate_rate();
clk->name = "local_timer";
@ -143,10 +141,7 @@ void __cpuinit twd_timer_setup(struct clock_event_device *clk)
clk->min_delta_ns = clockevent_delta2ns(0xf, clk);
/* Make sure our local interrupt controller has this enabled */
local_irq_save(flags);
irq_to_desc(clk->irq)->status |= IRQ_NOPROBE;
get_irq_chip(clk->irq)->unmask(clk->irq);
local_irq_restore(flags);
gic_enable_ppi(clk->irq);
clockevents_register_device(clk);
}

7
arch/arm/mach-cns3xxx/core.c
Просмотреть файл

@ -69,13 +69,10 @@ void __init cns3xxx_map_io(void)
}
/* used by entry-macro.S */
void __iomem *gic_cpu_base_addr;
void __init cns3xxx_init_irq(void)
{
gic_cpu_base_addr = __io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT);
gic_dist_init(0, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io(CNS3XXX_TC11MP_GIC_DIST_BASE_VIRT),
__io(CNS3XXX_TC11MP_GIC_CPU_BASE_VIRT));
}
void cns3xxx_power_off(void)

1
arch/arm/mach-cns3xxx/core.h
Просмотреть файл

@ -11,7 +11,6 @@
#ifndef __CNS3XXX_CORE_H
#define __CNS3XXX_CORE_H
extern void __iomem *gic_cpu_base_addr;
extern struct sys_timer cns3xxx_timer;
void __init cns3xxx_map_io(void);

66
arch/arm/mach-cns3xxx/include/mach/entry-macro.S
Просмотреть файл

@ -9,74 +9,10 @@
*/
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm

4
arch/arm/mach-davinci/include/mach/io.h
Просмотреть файл

@ -22,8 +22,8 @@
#define __mem_isa(a) (a)
#ifndef __ASSEMBLER__
#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
#define __arch_iounmap(v) davinci_iounmap(v)
#define __arch_ioremap davinci_ioremap
#define __arch_iounmap davinci_iounmap
void __iomem *davinci_ioremap(unsigned long phys, size_t size,
unsigned int type);

2
arch/arm/mach-integrator/integrator_cp.c
Просмотреть файл

@ -41,7 +41,7 @@
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <plat/timer-sp.h>
#include <asm/hardware/timer-sp.h>
#include "common.h"

4
arch/arm/mach-iop13xx/include/mach/io.h
Просмотреть файл

@ -35,7 +35,7 @@ extern u32 iop13xx_atux_mem_base;
extern size_t iop13xx_atue_mem_size;
extern size_t iop13xx_atux_mem_size;
#define __arch_ioremap(a, s, f) __iop13xx_ioremap(a, s, f)
#define __arch_iounmap(a) __iop13xx_iounmap(a)
#define __arch_ioremap __iop13xx_ioremap
#define __arch_iounmap __iop13xx_iounmap
#endif

4
arch/arm/mach-iop32x/include/mach/io.h
Просмотреть файл

@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr);
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
#define __arch_iounmap(a) __iop3xx_iounmap(a)
#define __arch_ioremap __iop3xx_ioremap
#define __arch_iounmap __iop3xx_iounmap
#endif

4
arch/arm/mach-iop33x/include/mach/io.h
Просмотреть файл

@ -21,7 +21,7 @@ extern void __iop3xx_iounmap(void __iomem *addr);
#define __io(p) ((void __iomem *)IOP3XX_PCI_IO_PHYS_TO_VIRT(p))
#define __mem_pci(a) (a)
#define __arch_ioremap(a, s, f) __iop3xx_ioremap(a, s, f)
#define __arch_iounmap(a) __iop3xx_iounmap(a)
#define __arch_ioremap __iop3xx_ioremap
#define __arch_iounmap __iop3xx_iounmap
#endif

4
arch/arm/mach-ixp23xx/include/mach/io.h
Просмотреть файл

@ -45,8 +45,8 @@ ixp23xx_iounmap(void __iomem *addr)
__iounmap(addr);
}
#define __arch_ioremap(a,s,f) ixp23xx_ioremap(a,s,f)
#define __arch_iounmap(a) ixp23xx_iounmap(a)
#define __arch_ioremap ixp23xx_ioremap
#define __arch_iounmap ixp23xx_iounmap
#endif

4
arch/arm/mach-ixp4xx/include/mach/io.h
Просмотреть файл

@ -74,8 +74,8 @@ static inline void __indirect_iounmap(void __iomem *addr)
__iounmap(addr);
}
#define __arch_ioremap(a, s, f) __indirect_ioremap(a, s, f)
#define __arch_iounmap(a) __indirect_iounmap(a)
#define __arch_ioremap __indirect_ioremap
#define __arch_iounmap __indirect_iounmap
#define writeb(v, p) __indirect_writeb(v, p)
#define writew(v, p) __indirect_writew(v, p)

4
arch/arm/mach-kirkwood/include/mach/io.h
Просмотреть файл

@ -42,8 +42,8 @@ __arch_iounmap(void __iomem *addr)
__iounmap(addr);
}
#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
#define __arch_iounmap(a) __arch_iounmap(a)
#define __arch_ioremap __arch_ioremap
#define __arch_iounmap __arch_iounmap
#define __io(a) __io(a)
#define __mem_pci(a) (a)

7
arch/arm/mach-msm/board-msm8x60.c
Просмотреть файл

@ -28,8 +28,6 @@
#include <mach/board.h>
#include <mach/msm_iomap.h>
void __iomem *gic_cpu_base_addr;
unsigned long clk_get_max_axi_khz(void)
{
return 0;
@ -44,9 +42,8 @@ static void __init msm8x60_init_irq(void)
{
unsigned int i;
gic_dist_init(0, MSM_QGIC_DIST_BASE, GIC_PPI_START);
gic_cpu_base_addr = (void *)MSM_QGIC_CPU_BASE;
gic_cpu_init(0, MSM_QGIC_CPU_BASE);
gic_init(0, GIC_PPI_START, MSM_QGIC_DIST_BASE,
(void *)MSM_QGIC_CPU_BASE);
/* Edge trigger PPIs except AVS_SVICINT and AVS_SVICINTSWDONE */
writel(0xFFFFD7FF, MSM_QGIC_DIST_BASE + GIC_DIST_CONFIG + 4);

93
arch/arm/mach-omap2/include/mach/entry-macro.S
Просмотреть файл

@ -105,6 +105,35 @@ omap_irq_base: .word 0
9999:
.endm
#ifdef CONFIG_SMP
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt
* on the controller, since this requires the original irqstat
* value which we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
it cc
strcc \irqstat, [\base, #GIC_CPU_EOI]
it cs
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
itt eq
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm
#endif /* CONFIG_SMP */
#else /* MULTI_OMAP2 */
@ -141,74 +170,16 @@ omap_irq_base: .word 0
#ifdef CONFIG_ARCH_OMAP4
#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
.macro get_irqnr_preamble, base, tmp
ldr \base, =OMAP4_IRQ_BASE
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an
* interrupt if it's between 30 and 1020. The test_for_ipi
* routine below will pick up on IPIs.
* A simple read from the controller will tell us the number
* of the highest priority enabled interrupt.
* We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
#endif
#endif /* MULTI_OMAP2 */
#ifdef CONFIG_SMP
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt
* on the controller, since this requires the original irqstat
* value which we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
it cc
strcc \irqstat, [\base, #GIC_CPU_EOI]
it cs
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
itt eq
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm
#endif /* CONFIG_SMP */
.macro irq_prio_table
.endm

1
arch/arm/mach-omap2/include/mach/omap4-common.h
Просмотреть файл

@ -24,7 +24,6 @@
extern void __iomem *l2cache_base;
#endif
extern void __iomem *gic_cpu_base_addr;
extern void __iomem *gic_dist_base_addr;
extern void __init gic_init_irq(void);

2
arch/arm/mach-omap2/omap-smp.c
Просмотреть файл

@ -50,7 +50,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, gic_cpu_base_addr);
gic_secondary_init(0);
/*
* Synchronise with the boot thread.

11
arch/arm/mach-omap2/omap4-common.c
Просмотреть файл

@ -26,21 +26,22 @@
void __iomem *l2cache_base;
#endif
void __iomem *gic_cpu_base_addr;
void __iomem *gic_dist_base_addr;
void __init gic_init_irq(void)
{
void __iomem *gic_cpu_base;
/* Static mapping, never released */
gic_dist_base_addr = ioremap(OMAP44XX_GIC_DIST_BASE, SZ_4K);
BUG_ON(!gic_dist_base_addr);
gic_dist_init(0, gic_dist_base_addr, 29);
/* Static mapping, never released */
gic_cpu_base_addr = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!gic_cpu_base_addr);
gic_cpu_init(0, gic_cpu_base_addr);
gic_cpu_base = ioremap(OMAP44XX_GIC_CPU_BASE, SZ_512);
BUG_ON(!gic_cpu_base);
gic_init(0, 29, gic_dist_base_addr, gic_cpu_base);
}
#ifdef CONFIG_CACHE_L2X0

4
arch/arm/mach-orion5x/include/mach/io.h
Просмотреть файл

@ -38,8 +38,8 @@ __arch_iounmap(void __iomem *addr)
__iounmap(addr);
}
#define __arch_ioremap(p, s, m) __arch_ioremap(p, s, m)
#define __arch_iounmap(a) __arch_iounmap(a)
#define __arch_ioremap __arch_ioremap
#define __arch_iounmap __arch_iounmap
#define __io(a) __typesafe_io(a)
#define __mem_pci(a) (a)

5
arch/arm/mach-realview/core.c
Просмотреть файл

@ -50,13 +50,10 @@
#include <mach/clkdev.h>
#include <mach/platform.h>
#include <mach/irqs.h>
#include <plat/timer-sp.h>
#include <asm/hardware/timer-sp.h>
#include "core.h"
/* used by entry-macro.S and platsmp.c */
void __iomem *gic_cpu_base_addr;
#ifdef CONFIG_ZONE_DMA
/*
* Adjust the zones if there are restrictions for DMA access.

1
arch/arm/mach-realview/core.h
Просмотреть файл

@ -53,7 +53,6 @@ extern struct platform_device realview_i2c_device;
extern struct mmci_platform_data realview_mmc0_plat_data;
extern struct mmci_platform_data realview_mmc1_plat_data;
extern struct clcd_board clcd_plat_data;
extern void __iomem *gic_cpu_base_addr;
extern void __iomem *timer0_va_base;
extern void __iomem *timer1_va_base;
extern void __iomem *timer2_va_base;

65
arch/arm/mach-realview/include/mach/entry-macro.S
Просмотреть файл

@ -8,74 +8,11 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm

2
arch/arm/mach-realview/platsmp.c
Просмотреть файл

@ -69,7 +69,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, gic_cpu_base_addr);
gic_secondary_init(0);
/*
* let the primary processor know we're out of the

14
arch/arm/mach-realview/realview_eb.c
Просмотреть файл

@ -364,21 +364,19 @@ static void __init gic_init_irq(void)
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
/* core tile GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_EB11MP_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_EB11MP_GIC_DIST_BASE),
__io_address(REALVIEW_EB11MP_GIC_CPU_BASE));
#ifndef CONFIG_REALVIEW_EB_ARM11MP_REVB
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_EB_GIC_DIST_BASE), 64);
gic_cpu_init(1, __io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_init(1, 64, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_EB11MP_EB_IRQ1);
#endif
} else {
/* board GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_EB_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_EB_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_EB_GIC_DIST_BASE),
__io_address(REALVIEW_EB_GIC_CPU_BASE));
}
}

11
arch/arm/mach-realview/realview_pb1176.c
Просмотреть файл

@ -304,13 +304,14 @@ static struct platform_device char_lcd_device = {
static void __init gic_init_irq(void)
{
/* ARM1176 DevChip GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_DC1176_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_DC1176_GIC_DIST_BASE), IRQ_DC1176_GIC_START);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, IRQ_DC1176_GIC_START,
__io_address(REALVIEW_DC1176_GIC_DIST_BASE),
__io_address(REALVIEW_DC1176_GIC_CPU_BASE));
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_PB1176_GIC_DIST_BASE), IRQ_PB1176_GIC_START);
gic_cpu_init(1, __io_address(REALVIEW_PB1176_GIC_CPU_BASE));
gic_init(1, IRQ_PB1176_GIC_START,
__io_address(REALVIEW_PB1176_GIC_DIST_BASE),
__io_address(REALVIEW_PB1176_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_DC1176_PB_IRQ1);
}

10
arch/arm/mach-realview/realview_pb11mp.c
Просмотреть файл

@ -309,13 +309,13 @@ static void __init gic_init_irq(void)
writel(0x00000000, __io_address(REALVIEW_SYS_LOCK));
/* ARM11MPCore test chip GIC, primary */
gic_cpu_base_addr = __io_address(REALVIEW_TC11MP_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, __io_address(REALVIEW_TC11MP_GIC_DIST_BASE),
__io_address(REALVIEW_TC11MP_GIC_CPU_BASE));
/* board GIC, secondary */
gic_dist_init(1, __io_address(REALVIEW_PB11MP_GIC_DIST_BASE), IRQ_PB11MP_GIC_START);
gic_cpu_init(1, __io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
gic_init(1, IRQ_PB11MP_GIC_START,
__io_address(REALVIEW_PB11MP_GIC_DIST_BASE),
__io_address(REALVIEW_PB11MP_GIC_CPU_BASE));
gic_cascade_irq(1, IRQ_TC11MP_PB_IRQ1);
}

6
arch/arm/mach-realview/realview_pba8.c
Просмотреть файл

@ -273,9 +273,9 @@ static struct platform_device pmu_device = {
static void __init gic_init_irq(void)
{
/* ARM PB-A8 on-board GIC */
gic_cpu_base_addr = __io_address(REALVIEW_PBA8_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBA8_GIC_DIST_BASE), IRQ_PBA8_GIC_START);
gic_cpu_init(0, __io_address(REALVIEW_PBA8_GIC_CPU_BASE));
gic_init(0, IRQ_PBA8_GIC_START,
__io_address(REALVIEW_PBA8_GIC_DIST_BASE),
__io_address(REALVIEW_PBA8_GIC_CPU_BASE));
}
static void __init realview_pba8_timer_init(void)

13
arch/arm/mach-realview/realview_pbx.c
Просмотреть файл

@ -313,15 +313,12 @@ static void __init gic_init_irq(void)
{
/* ARM PBX on-board GIC */
if (core_tile_pbx11mp() || core_tile_pbxa9mp()) {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
29);
gic_cpu_init(0, __io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
gic_init(0, 29, __io_address(REALVIEW_PBX_TILE_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_TILE_GIC_CPU_BASE));
} else {
gic_cpu_base_addr = __io_address(REALVIEW_PBX_GIC_CPU_BASE);
gic_dist_init(0, __io_address(REALVIEW_PBX_GIC_DIST_BASE),
IRQ_PBX_GIC_START);
gic_cpu_init(0, __io_address(REALVIEW_PBX_GIC_CPU_BASE));
gic_init(0, IRQ_PBX_GIC_START,
__io_address(REALVIEW_PBX_GIC_DIST_BASE),
__io_address(REALVIEW_PBX_GIC_CPU_BASE));
}
}

6
arch/arm/mach-s5pv310/cpu.c
Просмотреть файл

@ -24,8 +24,6 @@
#include <mach/regs-irq.h>
void __iomem *gic_cpu_base_addr;
extern int combiner_init(unsigned int combiner_nr, void __iomem *base,
unsigned int irq_start);
extern void combiner_cascade_irq(unsigned int combiner_nr, unsigned int irq);
@ -122,9 +120,7 @@ void __init s5pv310_init_irq(void)
{
int irq;
gic_cpu_base_addr = S5P_VA_GIC_CPU;
gic_dist_init(0, S5P_VA_GIC_DIST, IRQ_LOCALTIMER);
gic_cpu_init(0, S5P_VA_GIC_CPU);
gic_init(0, IRQ_LOCALTIMER, S5P_VA_GIC_DIST, S5P_VA_GIC_CPU);
for (irq = 0; irq < MAX_COMBINER_NR; irq++) {
combiner_init(irq, (void __iomem *)S5P_VA_COMBINER(irq),

2
arch/arm/mach-s5pv310/include/mach/smp.h
Просмотреть файл

@ -9,8 +9,6 @@
#include <asm/hardware/gic.h>
#include <asm/smp_mpidr.h>
extern void __iomem *gic_cpu_base_addr;
/*
* We use IRQ1 as the IPI
*/

2
arch/arm/mach-s5pv310/platsmp.c
Просмотреть файл

@ -54,7 +54,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, gic_cpu_base_addr);
gic_secondary_init(0);
/*
* let the primary processor know we're out of the

10
arch/arm/mach-sa1100/Kconfig
Просмотреть файл

@ -118,6 +118,16 @@ config SA1100_LART
(also known as the LART). See <http://www.lartmaker.nl/> for
information on the LART.
config SA1100_NANOENGINE
bool "nanoEngine"
select CPU_FREQ_SA1110
select PCI
select PCI_NANOENGINE
help
Say Y here if you are using the Bright Star Engineering nanoEngine.
See <http://www.brightstareng.com/arm/nanoeng.htm> for information
on the BSE nanoEngine.
config SA1100_PLEB
bool "PLEB"
select CPU_FREQ_SA1100

3
arch/arm/mach-sa1100/Makefile
Просмотреть файл

@ -37,6 +37,9 @@ obj-$(CONFIG_SA1100_JORNADA720_SSP) += jornada720_ssp.o
obj-$(CONFIG_SA1100_LART) += lart.o
led-$(CONFIG_SA1100_LART) += leds-lart.o
obj-$(CONFIG_SA1100_NANOENGINE) += nanoengine.o
obj-$(CONFIG_PCI_NANOENGINE) += pci-nanoengine.o
obj-$(CONFIG_SA1100_PLEB) += pleb.o
obj-$(CONFIG_SA1100_SHANNON) += shannon.o

51
arch/arm/mach-sa1100/cpu-sa1100.c
Просмотреть файл

@ -94,48 +94,47 @@
#include "generic.h"
typedef struct {
struct sa1100_dram_regs {
int speed;
u32 mdcnfg;
u32 mdcas0;
u32 mdcas1;
u32 mdcas2;
} sa1100_dram_regs_t;
};
static struct cpufreq_driver sa1100_driver;
static sa1100_dram_regs_t sa1100_dram_settings[] =
{
/* speed, mdcnfg, mdcas0, mdcas1, mdcas2 clock frequency */
{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 59.0 MHz */
{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 73.7 MHz */
{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 88.5 MHz */
{ 103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff }, /* 103.2 MHz */
{ 118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 118.0 MHz */
{ 132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff }, /* 132.7 MHz */
{ 147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff }, /* 147.5 MHz */
{ 162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff }, /* 162.2 MHz */
{ 176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff }, /* 176.9 MHz */
{ 191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff }, /* 191.7 MHz */
{ 206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 206.4 MHz */
{ 221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff }, /* 221.2 MHz */
{ 235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1 }, /* 235.9 MHz */
{ 250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 250.7 MHz */
{ 265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3 }, /* 265.4 MHz */
{ 280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87 }, /* 280.2 MHz */
static struct sa1100_dram_regs sa1100_dram_settings[] = {
/*speed, mdcnfg, mdcas0, mdcas1, mdcas2, clock freq */
{ 59000, 0x00dc88a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 59.0 MHz */
{ 73700, 0x011490a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 73.7 MHz */
{ 88500, 0x014e90a3, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 88.5 MHz */
{103200, 0x01889923, 0xcccccccf, 0xfffffffc, 0xffffffff},/* 103.2 MHz */
{118000, 0x01c29923, 0x9999998f, 0xfffffff9, 0xffffffff},/* 118.0 MHz */
{132700, 0x01fb2123, 0x9999998f, 0xfffffff9, 0xffffffff},/* 132.7 MHz */
{147500, 0x02352123, 0x3333330f, 0xfffffff3, 0xffffffff},/* 147.5 MHz */
{162200, 0x026b29a3, 0x38e38e1f, 0xfff8e38e, 0xffffffff},/* 162.2 MHz */
{176900, 0x02a329a3, 0x71c71c1f, 0xfff1c71c, 0xffffffff},/* 176.9 MHz */
{191700, 0x02dd31a3, 0xe38e383f, 0xffe38e38, 0xffffffff},/* 191.7 MHz */
{206400, 0x03153223, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 206.4 MHz */
{221200, 0x034fba23, 0xc71c703f, 0xffc71c71, 0xffffffff},/* 221.2 MHz */
{235900, 0x03853a23, 0xe1e1e07f, 0xe1e1e1e1, 0xffffffe1},/* 235.9 MHz */
{250700, 0x03bf3aa3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 250.7 MHz */
{265400, 0x03f7c2a3, 0xc3c3c07f, 0xc3c3c3c3, 0xffffffc3},/* 265.4 MHz */
{280200, 0x0431c2a3, 0x878780ff, 0x87878787, 0xffffff87},/* 280.2 MHz */
{ 0, 0, 0, 0, 0 } /* last entry */
};
static void sa1100_update_dram_timings(int current_speed, int new_speed)
{
sa1100_dram_regs_t *settings = sa1100_dram_settings;
struct sa1100_dram_regs *settings = sa1100_dram_settings;
/* find speed */
while (settings->speed != 0) {
if(new_speed == settings->speed)
if (new_speed == settings->speed)
break;
settings++;
}
@ -149,7 +148,7 @@ static void sa1100_update_dram_timings(int current_speed, int new_speed)
/* We're going FASTER, so first relax the memory
* timings before changing the core frequency
*/
/* Half the memory access clock */
MDCNFG |= MDCNFG_CDB2;
@ -187,7 +186,7 @@ static int sa1100_target(struct cpufreq_policy *policy,
struct cpufreq_freqs freqs;
new_ppcr = sa11x0_freq_to_ppcr(target_freq);
switch(relation){
switch (relation) {
case CPUFREQ_RELATION_L:
if (sa11x0_ppcr_to_freq(new_ppcr) > policy->max)
new_ppcr--;

57
arch/arm/mach-sa1100/cpu-sa1110.c
Просмотреть файл

@ -16,28 +16,24 @@
*
* The SDRAM type can be passed on the command line as cpu_sa1110.sdram=type
*/
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/kernel.h>
#include <linux/moduleparam.h>
#include <linux/types.h>
#include <mach/hardware.h>
#include <asm/cputype.h>
#include <asm/mach-types.h>
#include <asm/system.h>
#include <mach/hardware.h>
#include "generic.h"
#undef DEBUG
static struct cpufreq_driver sa1110_driver;
struct sdram_params {
const char name[16];
const char name[20];
u_char rows; /* bits */
u_char cas_latency; /* cycles */
u_char tck; /* clock cycle time (ns) */
@ -107,6 +103,15 @@ static struct sdram_params sdram_tbl[] __initdata = {
.twr = 8,
.refresh = 64000,
.cas_latency = 3,
}, { /* Micron MT48LC8M16A2TG-75 */
.name = "MT48LC8M16A2TG-75",
.rows = 12,
.tck = 8,
.trcd = 20,
.trp = 20,
.twr = 8,
.refresh = 64000,
.cas_latency = 3,
},
};
@ -180,11 +185,13 @@ sdram_calculate_timing(struct sdram_info *sd, u_int cpu_khz,
sd->mdrefr |= MDREFR_K1DB2;
/* initial number of '1's in MDCAS + 1 */
set_mdcas(sd->mdcas, sd_khz >= 62000, ns_to_cycles(sdram->trcd, mem_khz));
set_mdcas(sd->mdcas, sd_khz >= 62000,
ns_to_cycles(sdram->trcd, mem_khz));
#ifdef DEBUG
printk("MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1], sd->mdcas[2]);
printk(KERN_DEBUG "MDCNFG: %08x MDREFR: %08x MDCAS0: %08x MDCAS1: %08x MDCAS2: %08x\n",
sd->mdcnfg, sd->mdrefr, sd->mdcas[0], sd->mdcas[1],
sd->mdcas[2]);
#endif
}
@ -213,7 +220,7 @@ sdram_update_refresh(u_int cpu_khz, struct sdram_params *sdram)
#ifdef DEBUG
mdelay(250);
printk("new dri value = %d\n", dri);
printk(KERN_DEBUG "new dri value = %d\n", dri);
#endif
sdram_set_refresh(dri);
@ -232,7 +239,7 @@ static int sa1110_target(struct cpufreq_policy *policy,
unsigned long flags;
unsigned int ppcr, unused;
switch(relation){
switch (relation) {
case CPUFREQ_RELATION_L:
ppcr = sa11x0_freq_to_ppcr(target_freq);
if (sa11x0_ppcr_to_freq(ppcr) > policy->max)
@ -280,11 +287,10 @@ static int sa1110_target(struct cpufreq_policy *policy,
* We wait 20ms to be safe.
*/
sdram_set_refresh(2);
if (!irqs_disabled()) {
if (!irqs_disabled())
msleep(20);
} else {
else
mdelay(20);
}
/*
* Reprogram the DRAM timings with interrupts disabled, and
@ -295,7 +301,7 @@ static int sa1110_target(struct cpufreq_policy *policy,
local_irq_save(flags);
asm("mcr p15, 0, %0, c7, c10, 4" : : "r" (0));
udelay(10);
__asm__ __volatile__(" \n\
__asm__ __volatile__("\n\
b 2f \n\
.align 5 \n\
1: str %3, [%1, #0] @ MDCNFG \n\
@ -336,7 +342,9 @@ static int __init sa1110_cpu_init(struct cpufreq_policy *policy)
return 0;
}
static struct cpufreq_driver sa1110_driver = {
/* sa1110_driver needs __refdata because it must remain after init registers
* it with cpufreq_register_driver() */
static struct cpufreq_driver sa1110_driver __refdata = {
.flags = CPUFREQ_STICKY,
.verify = sa11x0_verify_speed,
.target = sa1110_target,
@ -349,7 +357,8 @@ static struct sdram_params *sa1110_find_sdram(const char *name)
{
struct sdram_params *sdram;
for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl); sdram++)
for (sdram = sdram_tbl; sdram < sdram_tbl + ARRAY_SIZE(sdram_tbl);
sdram++)
if (strcmp(name, sdram->name) == 0)
return sdram;
@ -369,14 +378,14 @@ static int __init sa1110_clk_init(void)
if (!name[0]) {
if (machine_is_assabet())
name = "TC59SM716-CL3";
if (machine_is_pt_system3())
name = "K4S641632D";
if (machine_is_h3100())
name = "KM416S4030CT";
if (machine_is_jornada720())
name = "K4S281632B-1H";
name = "K4S281632B-1H";
if (machine_is_nanoengine())
name = "MT48LC8M16A2TG-75";
}
sdram = sa1110_find_sdram(name);

41
arch/arm/mach-sa1100/generic.c
Просмотреть файл

@ -163,10 +163,15 @@ static void sa11x0_register_device(struct platform_device *dev, void *data)
static struct resource sa11x0udc_resources[] = {
[0] = {
.start = 0x80000000,
.end = 0x8000ffff,
.start = __PREG(Ser0UDCCR),
.end = __PREG(Ser0UDCCR) + 0xffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_Ser0UDC,
.end = IRQ_Ser0UDC,
.flags = IORESOURCE_IRQ,
},
};
static u64 sa11x0udc_dma_mask = 0xffffffffUL;
@ -184,10 +189,15 @@ static struct platform_device sa11x0udc_device = {
static struct resource sa11x0uart1_resources[] = {
[0] = {
.start = 0x80010000,
.end = 0x8001ffff,
.start = __PREG(Ser1UTCR0),
.end = __PREG(Ser1UTCR0) + 0xffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_Ser1UART,
.end = IRQ_Ser1UART,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sa11x0uart1_device = {
@ -199,10 +209,15 @@ static struct platform_device sa11x0uart1_device = {
static struct resource sa11x0uart3_resources[] = {
[0] = {
.start = 0x80050000,
.end = 0x8005ffff,
.start = __PREG(Ser3UTCR0),
.end = __PREG(Ser3UTCR0) + 0xffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_Ser3UART,
.end = IRQ_Ser3UART,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device sa11x0uart3_device = {
@ -214,10 +229,15 @@ static struct platform_device sa11x0uart3_device = {
static struct resource sa11x0mcp_resources[] = {
[0] = {
.start = 0x80060000,
.end = 0x8006ffff,
.start = __PREG(Ser4MCCR0),
.end = __PREG(Ser4MCCR0) + 0xffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_Ser4MCP,
.end = IRQ_Ser4MCP,
.flags = IORESOURCE_IRQ,
},
};
static u64 sa11x0mcp_dma_mask = 0xffffffffUL;
@ -244,6 +264,11 @@ static struct resource sa11x0ssp_resources[] = {
.end = 0x8007ffff,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = IRQ_Ser4SSP,
.end = IRQ_Ser4SSP,
.flags = IORESOURCE_IRQ,
},
};
static u64 sa11x0ssp_dma_mask = 0xffffffffUL;

8
arch/arm/mach-sa1100/include/mach/hardware.h
Просмотреть файл

@ -76,4 +76,12 @@ static inline unsigned long get_clock_tick_rate(void)
#include "SA-1101.h"
#endif
#if defined(CONFIG_ARCH_SA1100) && defined(CONFIG_PCI)
#define PCIBIOS_MIN_IO 0
#define PCIBIOS_MIN_MEM 0
#define pcibios_assign_all_busses() 1
#define HAVE_ARCH_PCI_SET_DMA_MASK 1
#endif
#endif /* _ASM_ARCH_HARDWARE_H */

52
arch/arm/mach-sa1100/include/mach/nanoengine.h Normal file
Просмотреть файл

@ -0,0 +1,52 @@
/*
* arch/arm/mach-sa1100/include/mach/nanoengine.h
*
* This file contains the hardware specific definitions for nanoEngine.
* Only include this file from SA1100-specific files.
*
* Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#ifndef __ASM_ARCH_NANOENGINE_H
#define __ASM_ARCH_NANOENGINE_H
#include <mach/irqs.h>
#define GPIO_PC_READY0 GPIO_GPIO(11) /* ready for socket 0 (active high)*/
#define GPIO_PC_READY1 GPIO_GPIO(12) /* ready for socket 1 (active high) */
#define GPIO_PC_CD0 GPIO_GPIO(13) /* detect for socket 0 (active low) */
#define GPIO_PC_CD1 GPIO_GPIO(14) /* detect for socket 1 (active low) */
#define GPIO_PC_RESET0 GPIO_GPIO(15) /* reset socket 0 */
#define GPIO_PC_RESET1 GPIO_GPIO(16) /* reset socket 1 */
#define NANOENGINE_IRQ_GPIO_PCI IRQ_GPIO0
#define NANOENGINE_IRQ_GPIO_PC_READY0 IRQ_GPIO11
#define NANOENGINE_IRQ_GPIO_PC_READY1 IRQ_GPIO12
#define NANOENGINE_IRQ_GPIO_PC_CD0 IRQ_GPIO13
#define NANOENGINE_IRQ_GPIO_PC_CD1 IRQ_GPIO14
/*
* nanoEngine Memory Map:
*
* 0000.0000 - 003F.0000 - 4 MB Flash
* C000.0000 - C1FF.FFFF - 32 MB SDRAM
* 1860.0000 - 186F.FFFF - 1 MB Internal PCI Memory Read/Write
* 18A1.0000 - 18A1.FFFF - 64 KB Internal PCI Config Space
* 4000.0000 - 47FF.FFFF - 128 MB External Bus I/O - Multiplexed Mode
* 4800.0000 - 4FFF.FFFF - 128 MB External Bus I/O - Non-Multiplexed Mode
*
*/
#define NANO_PCI_MEM_RW_PHYS 0x18600000
#define NANO_PCI_MEM_RW_VIRT 0xf1000000
#define NANO_PCI_MEM_RW_SIZE SZ_1M
#define NANO_PCI_CONFIG_SPACE_PHYS 0x18A10000
#define NANO_PCI_CONFIG_SPACE_VIRT 0xf2000000
#define NANO_PCI_CONFIG_SPACE_SIZE SZ_64K
#endif

119
arch/arm/mach-sa1100/nanoengine.c Normal file
Просмотреть файл

@ -0,0 +1,119 @@
/*
* linux/arch/arm/mach-sa1100/nanoengine.c
*
* Bright Star Engineering's nanoEngine board init code.
*
* Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/root_dev.h>
#include <asm/mach-types.h>
#include <asm/setup.h>
#include <asm/mach/arch.h>
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
#include <asm/mach/serial_sa1100.h>
#include <mach/hardware.h>
#include <mach/nanoengine.h>
#include "generic.h"
/* Flash bank 0 */
static struct mtd_partition nanoengine_partitions[] = {
{
.name = "nanoEngine boot firmware and parameter table",
.size = 0x00010000, /* 32K */
.offset = 0,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "kernel/initrd reserved",
.size = 0x002f0000,
.offset = 0x00010000,
.mask_flags = MTD_WRITEABLE,
}, {
.name = "experimental filesystem allocation",
.size = 0x00100000,
.offset = 0x00300000,
.mask_flags = MTD_WRITEABLE,
}
};
static struct flash_platform_data nanoengine_flash_data = {
.map_name = "jedec_probe",
.parts = nanoengine_partitions,
.nr_parts = ARRAY_SIZE(nanoengine_partitions),
};
static struct resource nanoengine_flash_resources[] = {
{
.start = SA1100_CS0_PHYS,
.end = SA1100_CS0_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}, {
.start = SA1100_CS1_PHYS,
.end = SA1100_CS1_PHYS + SZ_32M - 1,
.flags = IORESOURCE_MEM,
}
};
static struct map_desc nanoengine_io_desc[] __initdata = {
{
/* System Registers */
.virtual = 0xf0000000,
.pfn = __phys_to_pfn(0x10000000),
.length = 0x00100000,
.type = MT_DEVICE
}, {
/* Internal PCI Memory Read/Write */
.virtual = NANO_PCI_MEM_RW_VIRT,
.pfn = __phys_to_pfn(NANO_PCI_MEM_RW_PHYS),
.length = NANO_PCI_MEM_RW_SIZE,
.type = MT_DEVICE
}, {
/* Internal PCI Config Space */
.virtual = NANO_PCI_CONFIG_SPACE_VIRT,
.pfn = __phys_to_pfn(NANO_PCI_CONFIG_SPACE_PHYS),
.length = NANO_PCI_CONFIG_SPACE_SIZE,
.type = MT_DEVICE
}
};
static void __init nanoengine_map_io(void)
{
sa1100_map_io();
iotable_init(nanoengine_io_desc, ARRAY_SIZE(nanoengine_io_desc));
sa1100_register_uart(0, 1);
sa1100_register_uart(1, 2);
sa1100_register_uart(2, 3);
Ser1SDCR0 |= SDCR0_UART;
/* disable IRDA -- UART2 is used as a normal serial port */
Ser2UTCR4 = 0;
Ser2HSCR0 = 0;
}
static void __init nanoengine_init(void)
{
sa11x0_register_mtd(&nanoengine_flash_data, nanoengine_flash_resources,
ARRAY_SIZE(nanoengine_flash_resources));
}
MACHINE_START(NANOENGINE, "BSE nanoEngine")
.boot_params = 0xc0000000,
.map_io = nanoengine_map_io,
.init_irq = sa1100_init_irq,
.timer = &sa1100_timer,
.init_machine = nanoengine_init,
MACHINE_END

284
arch/arm/mach-sa1100/pci-nanoengine.c Normal file
Просмотреть файл

@ -0,0 +1,284 @@
/*
* linux/arch/arm/mach-sa1100/pci-nanoengine.c
*
* PCI functions for BSE nanoEngine PCI
*
* Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/kernel.h>
#include <linux/irq.h>
#include <linux/pci.h>
#include <linux/spinlock.h>
#include <asm/mach/pci.h>
#include <asm/mach-types.h>
#include <mach/nanoengine.h>
static DEFINE_SPINLOCK(nano_lock);
static int nanoengine_get_pci_address(struct pci_bus *bus,
unsigned int devfn, int where, unsigned long *address)
{
int ret = PCIBIOS_DEVICE_NOT_FOUND;
unsigned int busnr = bus->number;
*address = NANO_PCI_CONFIG_SPACE_VIRT +
((bus->number << 16) | (devfn << 8) | (where & ~3));
ret = (busnr > 255 || devfn > 255 || where > 255) ?
PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
return ret;
}
static int nanoengine_read_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 *val)
{
int ret;
unsigned long address;
unsigned long flags;
u32 v;
/* nanoEngine PCI bridge does not return -1 for a non-existing
* device. We must fake the answer. We know that the only valid
* device is device zero at bus 0, which is the network chip. */
if (bus->number != 0 || (devfn >> 3) != 0) {
v = -1;
nanoengine_get_pci_address(bus, devfn, where, &address);
goto exit_function;
}
spin_lock_irqsave(&nano_lock, flags);
ret = nanoengine_get_pci_address(bus, devfn, where, &address);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
v = __raw_readl(address);
spin_unlock_irqrestore(&nano_lock, flags);
v >>= ((where & 3) * 8);
v &= (unsigned long)(-1) >> ((4 - size) * 8);
exit_function:
*val = v;
return PCIBIOS_SUCCESSFUL;
}
static int nanoengine_write_config(struct pci_bus *bus, unsigned int devfn, int where,
int size, u32 val)
{
int ret;
unsigned long address;
unsigned long flags;
unsigned shift;
u32 v;
shift = (where & 3) * 8;
spin_lock_irqsave(&nano_lock, flags);
ret = nanoengine_get_pci_address(bus, devfn, where, &address);
if (ret != PCIBIOS_SUCCESSFUL)
return ret;
v = __raw_readl(address);
switch (size) {
case 1:
v &= ~(0xFF << shift);
v |= val << shift;
break;
case 2:
v &= ~(0xFFFF << shift);
v |= val << shift;
break;
case 4:
v = val;
break;
}
__raw_writel(v, address);
spin_unlock_irqrestore(&nano_lock, flags);
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops pci_nano_ops = {
.read = nanoengine_read_config,
.write = nanoengine_write_config,
};
static int __init pci_nanoengine_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
return NANOENGINE_IRQ_GPIO_PCI;
}
struct pci_bus * __init pci_nanoengine_scan_bus(int nr, struct pci_sys_data *sys)
{
return pci_scan_bus(sys->busnr, &pci_nano_ops, sys);
}
static struct resource pci_io_ports = {
.name = "PCI IO",
.start = 0x400,
.end = 0x7FF,
.flags = IORESOURCE_IO,
};
static struct resource pci_non_prefetchable_memory = {
.name = "PCI non-prefetchable",
.start = NANO_PCI_MEM_RW_PHYS,
/* nanoEngine documentation says there is a 1 Megabyte window here,
* but PCI reports just 128 + 8 kbytes. */
.end = NANO_PCI_MEM_RW_PHYS + NANO_PCI_MEM_RW_SIZE - 1,
/* .end = NANO_PCI_MEM_RW_PHYS + SZ_128K + SZ_8K - 1,*/
.flags = IORESOURCE_MEM,
};
/*
* nanoEngine PCI reports 1 Megabyte of prefetchable memory, but it
* overlaps with previously defined memory.
*
* Here is what happens:
*
# dmesg
...
pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
pci 0000:00:00.0: reg 14: [io 0x0000-0x003f]
pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
PCI: bus0: Fast back to back transfers enabled
pci 0000:00:00.0: BAR 6: can't assign mem pref (size 0x100000)
pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f]
pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f])
*
* On the other hand, if we do not request the prefetchable memory resource,
* linux will alloc it first and the two non-prefetchable memory areas that
* are our real interest will not be mapped. So we choose to map it to an
* unused area. It gets recognized as expansion ROM, but becomes disabled.
*
* Here is what happens then:
*
# dmesg
...
pci 0000:00:00.0: [8086:1209] type 0 class 0x000200
pci 0000:00:00.0: reg 10: [mem 0x00021000-0x00021fff]
pci 0000:00:00.0: reg 14: [io 0x0000-0x003f]
pci 0000:00:00.0: reg 18: [mem 0x00000000-0x0001ffff]
pci 0000:00:00.0: reg 30: [mem 0x00000000-0x000fffff pref]
pci 0000:00:00.0: supports D1 D2
pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot
pci 0000:00:00.0: PME# disabled
PCI: bus0: Fast back to back transfers enabled
pci 0000:00:00.0: BAR 6: assigned [mem 0x78000000-0x780fffff pref]
pci 0000:00:00.0: BAR 2: assigned [mem 0x18600000-0x1861ffff]
pci 0000:00:00.0: BAR 2: set to [mem 0x18600000-0x1861ffff] (PCI address [0x0-0x1ffff])
pci 0000:00:00.0: BAR 0: assigned [mem 0x18620000-0x18620fff]
pci 0000:00:00.0: BAR 0: set to [mem 0x18620000-0x18620fff] (PCI address [0x20000-0x20fff])
pci 0000:00:00.0: BAR 1: assigned [io 0x0400-0x043f]
pci 0000:00:00.0: BAR 1: set to [io 0x0400-0x043f] (PCI address [0x0-0x3f])
# lspci -vv -s 0000:00:00.0
00:00.0 Class 0200: Device 8086:1209 (rev 09)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR+ <PERR+ INTx-
Latency: 0 (2000ns min, 14000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 0
Region 0: Memory at 18620000 (32-bit, non-prefetchable) [size=4K]
Region 1: I/O ports at 0400 [size=64]
Region 2: [virtual] Memory at 18600000 (32-bit, non-prefetchable) [size=128K]
[virtual] Expansion ROM at 78000000 [disabled] [size=1M]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI+ D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold-)
Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: e100
Kernel modules: e100
*
*/
static struct resource pci_prefetchable_memory = {
.name = "PCI prefetchable",
.start = 0x78000000,
.end = 0x78000000 + NANO_PCI_MEM_RW_SIZE - 1,
.flags = IORESOURCE_MEM | IORESOURCE_PREFETCH,
};
static int __init pci_nanoengine_setup_resources(struct resource **resource)
{
if (request_resource(&ioport_resource, &pci_io_ports)) {
printk(KERN_ERR "PCI: unable to allocate io port region\n");
return -EBUSY;
}
if (request_resource(&iomem_resource, &pci_non_prefetchable_memory)) {
release_resource(&pci_io_ports);
printk(KERN_ERR "PCI: unable to allocate non prefetchable\n");
return -EBUSY;
}
if (request_resource(&iomem_resource, &pci_prefetchable_memory)) {
release_resource(&pci_io_ports);
release_resource(&pci_non_prefetchable_memory);
printk(KERN_ERR "PCI: unable to allocate prefetchable\n");
return -EBUSY;
}
resource[0] = &pci_io_ports;
resource[1] = &pci_non_prefetchable_memory;
resource[2] = &pci_prefetchable_memory;
return 1;
}
int __init pci_nanoengine_setup(int nr, struct pci_sys_data *sys)
{
int ret = 0;
if (nr == 0) {
sys->mem_offset = NANO_PCI_MEM_RW_PHYS;
sys->io_offset = 0x400;
ret = pci_nanoengine_setup_resources(sys->resource);
/* Enable alternate memory bus master mode, see
* "Intel StrongARM SA1110 Developer's Manual",
* section 10.8, "Alternate Memory Bus Master Mode". */
GPDR = (GPDR & ~GPIO_MBREQ) | GPIO_MBGNT;
GAFR |= GPIO_MBGNT | GPIO_MBREQ;
TUCR |= TUCR_MBGPIO;
}
return ret;
}
static struct hw_pci nanoengine_pci __initdata = {
.map_irq = pci_nanoengine_map_irq,
.nr_controllers = 1,
.scan = pci_nanoengine_scan_bus,
.setup = pci_nanoengine_setup,
};
static int __init nanoengine_pci_init(void)
{
if (machine_is_nanoengine())
pci_common_init(&nanoengine_pci);
return 0;
}
subsys_initcall(nanoengine_pci_init);

7
arch/arm/mach-sa1100/simpad.c
Просмотреть файл

@ -166,9 +166,6 @@ static void __init simpad_map_io(void)
PCFR = 0;
PSDR = 0;
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
sa11x0_register_mcp(&simpad_mcp_data);
}
static void simpad_power_off(void)
@ -216,6 +213,10 @@ static int __init simpad_init(void)
pm_power_off = simpad_power_off;
sa11x0_register_mtd(&simpad_flash_data, simpad_flash_resources,
ARRAY_SIZE(simpad_flash_resources));
sa11x0_register_mcp(&simpad_mcp_data);
ret = platform_add_devices(devices, ARRAY_SIZE(devices));
if(ret)
printk(KERN_WARNING "simpad: Unable to register mq200 framebuffer device");

1
arch/arm/mach-shmobile/board-ap4evb.c
Просмотреть файл

@ -61,6 +61,7 @@
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/time.h>
#include <asm/setup.h>
/*
* Address Interface BusWidth note

87
arch/arm/mach-shmobile/include/mach/head-ap4evb.txt Normal file
Просмотреть файл

@ -0,0 +1,87 @@
LIST "partner-jet-setup.txt"
LIST "(C) Copyright 2010 Renesas Solutions Corp"
LIST "Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>"
LIST "RWT Setting"
EW 0xE6020004, 0xA500
EW 0xE6030004, 0xA500
DD 0x01001000, 0x01001000
LIST "GPIO Setting"
EB 0xE6051013, 0xA2
LIST "CPG"
ED 0xE6150080, 0x00000180
ED 0xE61500C0, 0x00000002
WAIT 1, 0xFE40009C
LIST "FRQCR"
ED 0xE6150000, 0x2D1305C3
ED 0xE61500E0, 0x9E40358E
ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xE61500E4, 0x00002000
WAIT 1, 0xFE40009C
LIST "PLL"
ED 0xE6150028, 0x00004000
WAIT 1, 0xFE40009C
ED 0xE615002C, 0x93000040
WAIT 1, 0xFE40009C
LIST "BSC"
ED 0xFEC10000, 0x00E0001B
LIST "SBSC1"
ED 0xFE400354, 0x01AD8000
ED 0xFE400354, 0x01AD8001
WAIT 5, 0xFE40009C
ED 0xFE400008, 0xBCC90151
ED 0xFE400040, 0x41774113
ED 0xFE400044, 0x2712E229
ED 0xFE400048, 0x20C18505
ED 0xFE40004C, 0x00110209
ED 0xFE400010, 0x00000087
WAIT 10, 0xFE40009C
ED 0xFE400084, 0x0000003F
EB 0xFE500000, 0x00
WAIT 5, 0xFE40009C
ED 0xFE400084, 0x0000FF0A
EB 0xFE500000, 0x00
WAIT 1, 0xFE40009C
ED 0xFE400084, 0x00002201
EB 0xFE500000, 0x00
ED 0xFE400084, 0x00000302
EB 0xFE500000, 0x00
EB 0xFE5C0000, 0x00
ED 0xFE400008, 0xBCC90159
ED 0xFE40008C, 0x88800004
ED 0xFE400094, 0x00000004
ED 0xFE400028, 0xA55A0032
ED 0xFE40002C, 0xA55A000C
ED 0xFE400020, 0xA55A2048
ED 0xFE400008, 0xBCC90959
LIST "Change CPGA setting"
ED 0xE61500E0, 0x9E40352E
ED 0xE6150004, 0x80331050
WAIT 1, 0xFE40009C
ED 0xE6150354, 0x00000002

20
arch/arm/mach-shmobile/include/mach/zboot.h Normal file
Просмотреть файл

@ -0,0 +1,20 @@
#ifndef ZBOOT_H
#define ZBOOT_H
#include <asm/mach-types.h>
#include <mach/zboot_macros.h>
/**************************************************
*
* board specific settings
*
**************************************************/
#ifdef CONFIG_MACH_AP4EVB
#define MACH_TYPE MACH_TYPE_AP4EVB
#include "mach/head-ap4evb.txt"
#else
#error "unsupported board."
#endif
#endif /* ZBOOT_H */

65
arch/arm/mach-shmobile/include/mach/zboot_macros.h Normal file
Просмотреть файл

@ -0,0 +1,65 @@
#ifndef __ZBOOT_MACRO_H
#define __ZBOOT_MACRO_H
/* The LIST command is used to include comments in the script */
.macro LIST comment
.endm
/* The ED command is used to write a 32-bit word */
.macro ED, addr, data
LDR r0, 1f
LDR r1, 2f
STR r1, [r0]
B 3f
1 : .long \addr
2 : .long \data
3 :
.endm
/* The EW command is used to write a 16-bit word */
.macro EW, addr, data
LDR r0, 1f
LDR r1, 2f
STRH r1, [r0]
B 3f
1 : .long \addr
2 : .long \data
3 :
.endm
/* The EB command is used to write an 8-bit word */
.macro EB, addr, data
LDR r0, 1f
LDR r1, 2f
STRB r1, [r0]
B 3f
1 : .long \addr
2 : .long \data
3 :
.endm
/* The WAIT command is used to delay the execution */
.macro WAIT, time, reg
LDR r1, 1f
LDR r0, 2f
STR r0, [r1]
10 :
LDR r0, [r1]
CMP r0, #0x00000000
BNE 10b
NOP
B 3f
1 : .long \reg
2 : .long \time * 100
3 :
.endm
/* The DD command is used to read a 32-bit word */
.macro DD, start, end
LDR r1, 1f
B 2f
1 : .long \start
2 :
.endm
#endif /* __ZBOOT_MACRO_H */

66
arch/arm/mach-tegra/include/mach/entry-macro.S
Просмотреть файл

@ -16,8 +16,8 @@
#include <mach/io.h>
#if defined(CONFIG_ARM_GIC)
#include <asm/hardware/gic.h>
#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
/* Uses the GIC interrupt controller built into the cpu */
#define ICTRL_BASE (IO_CPU_VIRT + 0x100)
@ -32,68 +32,6 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt
* if it's between 30 and 1020. The test_for_ipi routine below will
* pick up on IPIs.
*
* A simple read from the controller will tell us the number of the
* highest priority enabled interrupt. We then just need to check
* whether it is in the valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* bits 12-10 = src CPU, 9-0 = int # */
ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm
#else
/* legacy interrupt controller for AP16 */
.macro disable_fiq

4
arch/arm/mach-tegra/include/mach/io.h
Просмотреть файл

@ -65,8 +65,8 @@
#ifndef __ASSEMBLER__
#define __arch_ioremap(p, s, t) tegra_ioremap(p, s, t)
#define __arch_iounmap(v) tegra_iounmap(v)
#define __arch_ioremap tegra_ioremap
#define __arch_iounmap tegra_iounmap
void __iomem *tegra_ioremap(unsigned long phys, size_t size, unsigned int type);
void tegra_iounmap(volatile void __iomem *addr);

4
arch/arm/mach-tegra/irq.c
Просмотреть файл

@ -94,8 +94,8 @@ void __init tegra_init_irq(void)
writel(0, ictlr_to_virt(i) + ICTLR_CPU_IEP_CLASS);
}
gic_dist_init(0, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE), 29);
gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
gic_init(0, 29, IO_ADDRESS(TEGRA_ARM_INT_DIST_BASE),
IO_ADDRESS(TEGRA_ARM_PERIF_BASE + 0x100));
gic = get_irq_chip(29);
gic_unmask_irq = gic->unmask;

2
arch/arm/mach-tegra/platsmp.c
Просмотреть файл

@ -48,7 +48,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, IO_ADDRESS(TEGRA_ARM_PERIF_BASE) + 0x100);
gic_secondary_init(0);
/*
* Synchronise with the boot thread.

4
arch/arm/mach-ux500/cpu.c
Просмотреть файл

@ -61,8 +61,8 @@ void __init ux500_init_devices(void)
void __init ux500_init_irq(void)
{
gic_dist_init(0, __io_address(UX500_GIC_DIST_BASE), 29);
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
gic_init(0, 29, __io_address(UX500_GIC_DIST_BASE),
__io_address(UX500_GIC_CPU_BASE));
/*
* Init clocks here so that they are available for system timer

68
arch/arm/mach-ux500/include/mach/entry-macro.S
Просмотреть файл

@ -11,7 +11,8 @@
* warranty of any kind, whether express or implied.
*/
#include <mach/hardware.h>
#include <asm/hardware/gic.h>
#define HAVE_GET_IRQNR_PREAMBLE
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
@ -22,68 +23,3 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an
* interrupt if it's between 30 and 1020. The test_for_ipi
* routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number
* of the highest priority enabled interrupt. We then just
* need to check whether it is in the valid range for an
* IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
/* bits 12-10 = src CPU, 9-0 = int # */
ldr \irqstat, [\base, #GIC_CPU_INTACK]
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ
* acknowledge register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of
* interrupt on the controller, since this requires the
* original irqstat value which we won't easily be able
* to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base
* are preserved..
*/
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm

2
arch/arm/mach-ux500/platsmp.c
Просмотреть файл

@ -44,7 +44,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, __io_address(UX500_GIC_CPU_BASE));
gic_secondary_init(0);
/*
* let the primary processor know we're out of the

2
arch/arm/mach-versatile/core.c
Просмотреть файл

@ -49,7 +49,7 @@
#include <mach/clkdev.h>
#include <mach/hardware.h>
#include <mach/platform.h>
#include <plat/timer-sp.h>
#include <asm/hardware/timer-sp.h>
#include "core.h"

2
arch/arm/mach-vexpress/core.h
Просмотреть файл

@ -22,5 +22,3 @@ struct map_desc;
void v2m_map_io(struct map_desc *tile, size_t num);
extern struct sys_timer v2m_timer;
extern void __iomem *gic_cpu_base_addr;

9
arch/arm/mach-vexpress/ct-ca9x4.c
Просмотреть файл

@ -21,7 +21,7 @@
#include <mach/clkdev.h>
#include <mach/ct-ca9x4.h>
#include <plat/timer-sp.h>
#include <asm/hardware/timer-sp.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@ -60,13 +60,10 @@ static void __init ct_ca9x4_map_io(void)
v2m_map_io(ct_ca9x4_io_desc, ARRAY_SIZE(ct_ca9x4_io_desc));
}
void __iomem *gic_cpu_base_addr;
static void __init ct_ca9x4_init_irq(void)
{
gic_cpu_base_addr = MMIO_P2V(A9_MPCORE_GIC_CPU);
gic_dist_init(0, MMIO_P2V(A9_MPCORE_GIC_DIST), 29);
gic_cpu_init(0, gic_cpu_base_addr);
gic_init(0, 29, MMIO_P2V(A9_MPCORE_GIC_DIST),
MMIO_P2V(A9_MPCORE_GIC_CPU));
}
#if 0

62
arch/arm/mach-vexpress/include/mach/entry-macro.S
Просмотреть файл

@ -1,67 +1,7 @@
#include <asm/hardware/gic.h>
#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
.macro get_irqnr_preamble, base, tmp
ldr \base, =gic_cpu_base_addr
ldr \base, [\base]
.endm
.macro arch_ret_to_user, tmp1, tmp2
.endm
/*
* The interrupt numbering scheme is defined in the
* interrupt controller spec. To wit:
*
* Interrupts 0-15 are IPI
* 16-28 are reserved
* 29-31 are local. We allow 30 to be used for the watchdog.
* 32-1020 are global
* 1021-1022 are reserved
* 1023 is "spurious" (no interrupt)
*
* For now, we ignore all local interrupts so only return an interrupt if it's
* between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
*
* A simple read from the controller will tell us the number of the highest
* priority enabled interrupt. We then just need to check whether it is in the
* valid range for an IRQ (30-1020 inclusive).
*/
.macro get_irqnr_and_base, irqnr, irqstat, base, tmp
ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
ldr \tmp, =1021
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #29
cmpcc \irqnr, \irqnr
cmpne \irqnr, \tmp
cmpcs \irqnr, \irqnr
.endm
/* We assume that irqstat (the raw value of the IRQ acknowledge
* register) is preserved from the macro above.
* If there is an IPI, we immediately signal end of interrupt on the
* controller, since this requires the original irqstat value which
* we won't easily be able to recreate later.
*/
.macro test_for_ipi, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
cmp \irqnr, #16
strcc \irqstat, [\base, #GIC_CPU_EOI]
cmpcs \irqnr, \irqnr
.endm
/* As above, this assumes that irqstat and base are preserved.. */
.macro test_for_ltirq, irqnr, irqstat, base, tmp
bic \irqnr, \irqstat, #0x1c00
mov \tmp, #0
cmp \irqnr, #29
moveq \tmp, #1
streq \irqstat, [\base, #GIC_CPU_EOI]
cmp \tmp, #0
.endm

2
arch/arm/mach-vexpress/platsmp.c
Просмотреть файл

@ -51,7 +51,7 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
*/
gic_cpu_init(0, gic_cpu_base_addr);
gic_secondary_init(0);
/*
* let the primary processor know we're out of the

2
arch/arm/mach-vexpress/v2m.c
Просмотреть файл

@ -22,7 +22,7 @@
#include <mach/clkdev.h>
#include <mach/motherboard.h>
#include <plat/timer-sp.h>
#include <asm/hardware/timer-sp.h>
#include "core.h"

4
arch/arm/plat-omap/include/plat/io.h
Просмотреть файл

@ -294,8 +294,8 @@ static inline void omap44xx_map_common_io(void)
extern void omap2_init_common_hw(struct omap_sdrc_params *sdrc_cs0,
struct omap_sdrc_params *sdrc_cs1);
#define __arch_ioremap(p,s,t) omap_ioremap(p,s,t)
#define __arch_iounmap(v) omap_iounmap(v)
#define __arch_ioremap omap_ioremap
#define __arch_iounmap omap_iounmap
void __iomem *omap_ioremap(unsigned long phys, size_t size, unsigned int type);
void omap_iounmap(volatile void __iomem *addr);

1
arch/arm/plat-versatile/Makefile
Просмотреть файл

@ -1,5 +1,4 @@
obj-y := clock.o
obj-$(CONFIG_ARM_TIMER_SP804) += timer-sp.o
obj-$(CONFIG_ARCH_REALVIEW) += sched-clock.o
obj-$(CONFIG_ARCH_VERSATILE) += sched-clock.o
ifeq ($(CONFIG_LEDS_CLASS),y)

3
drivers/pcmcia/Makefile
Просмотреть файл

@ -50,8 +50,9 @@ sa1111_cs-$(CONFIG_SA1100_JORNADA720) += sa1100_jornada720.o
sa1100_cs-y += sa1100_generic.o
sa1100_cs-$(CONFIG_SA1100_ASSABET) += sa1100_assabet.o
sa1100_cs-$(CONFIG_SA1100_CERF) += sa1100_cerf.o
sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
sa1100_cs-$(CONFIG_SA1100_COLLIE) += pxa2xx_sharpsl.o
sa1100_cs-$(CONFIG_SA1100_H3600) += sa1100_h3600.o
sa1100_cs-$(CONFIG_SA1100_NANOENGINE) += sa1100_nanoengine.o
sa1100_cs-$(CONFIG_SA1100_SHANNON) += sa1100_shannon.o
sa1100_cs-$(CONFIG_SA1100_SIMPAD) += sa1100_simpad.o

3
drivers/pcmcia/sa1100_generic.c
Просмотреть файл

@ -53,6 +53,9 @@ static int (*sa11x0_pcmcia_hw_init[])(struct device *dev) = {
#if defined(CONFIG_SA1100_H3100) || defined(CONFIG_SA1100_H3600)
pcmcia_h3600_init,
#endif
#ifdef CONFIG_SA1100_NANOENGINE
pcmcia_nanoengine_init,
#endif
#ifdef CONFIG_SA1100_SHANNON
pcmcia_shannon_init,
#endif

1
drivers/pcmcia/sa1100_generic.h
Просмотреть файл

@ -13,6 +13,7 @@ extern int pcmcia_freebird_init(struct device *);
extern int pcmcia_gcplus_init(struct device *);
extern int pcmcia_graphicsmaster_init(struct device *);
extern int pcmcia_h3600_init(struct device *);
extern int pcmcia_nanoengine_init(struct device *);
extern int pcmcia_pangolin_init(struct device *);
extern int pcmcia_pfs168_init(struct device *);
extern int pcmcia_shannon_init(struct device *);

219
drivers/pcmcia/sa1100_nanoengine.c Normal file
Просмотреть файл

@ -0,0 +1,219 @@
/*
* drivers/pcmcia/sa1100_nanoengine.c
*
* PCMCIA implementation routines for BSI nanoEngine.
*
* In order to have a fully functional pcmcia subsystem in a BSE nanoEngine
* board you should carefully read this:
* http://cambuca.ldhs.cetuc.puc-rio.br/nanoengine/
*
* Copyright (C) 2010 Marcelo Roberto Jimenez <mroberto@cpti.cetuc.puc-rio.br>
*
* Based on original work for kernel 2.4 by
* Miguel Freitas <miguel@cpti.cetuc.puc-rio.br>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/device.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/signal.h>
#include <asm/mach-types.h>
#include <asm/irq.h>
#include <mach/hardware.h>
#include <mach/nanoengine.h>
#include "sa1100_generic.h"
static struct pcmcia_irqs irqs_skt0[] = {
/* socket, IRQ, name */
{ 0, NANOENGINE_IRQ_GPIO_PC_CD0, "PC CD0" },
};
static struct pcmcia_irqs irqs_skt1[] = {
/* socket, IRQ, name */
{ 1, NANOENGINE_IRQ_GPIO_PC_CD1, "PC CD1" },
};
struct nanoengine_pins {
unsigned input_pins;
unsigned output_pins;
unsigned clear_outputs;
unsigned transition_pins;
unsigned pci_irq;
struct pcmcia_irqs *pcmcia_irqs;
unsigned pcmcia_irqs_size;
};
static struct nanoengine_pins nano_skts[] = {
{
.input_pins = GPIO_PC_READY0 | GPIO_PC_CD0,
.output_pins = GPIO_PC_RESET0,
.clear_outputs = GPIO_PC_RESET0,
.transition_pins = NANOENGINE_IRQ_GPIO_PC_CD0,
.pci_irq = NANOENGINE_IRQ_GPIO_PC_READY0,
.pcmcia_irqs = irqs_skt0,
.pcmcia_irqs_size = ARRAY_SIZE(irqs_skt0)
}, {
.input_pins = GPIO_PC_READY1 | GPIO_PC_CD1,
.output_pins = GPIO_PC_RESET1,
.clear_outputs = GPIO_PC_RESET1,
.transition_pins = NANOENGINE_IRQ_GPIO_PC_CD1,
.pci_irq = NANOENGINE_IRQ_GPIO_PC_READY1,
.pcmcia_irqs = irqs_skt1,
.pcmcia_irqs_size = ARRAY_SIZE(irqs_skt1)
}
};
unsigned num_nano_pcmcia_sockets = ARRAY_SIZE(nano_skts);
static int nanoengine_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return -ENXIO;
GPDR &= ~nano_skts[i].input_pins;
GPDR |= nano_skts[i].output_pins;
GPCR = nano_skts[i].clear_outputs;
set_irq_type(nano_skts[i].transition_pins, IRQ_TYPE_EDGE_BOTH);
skt->socket.pci_irq = nano_skts[i].pci_irq;
return soc_pcmcia_request_irqs(skt,
nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
}
/*
* Release all resources.
*/
static void nanoengine_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
soc_pcmcia_free_irqs(skt,
nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
}
static int nanoengine_pcmcia_configure_socket(
struct soc_pcmcia_socket *skt, const socket_state_t *state)
{
unsigned reset;
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return -ENXIO;
switch (i) {
case 0:
reset = GPIO_PC_RESET0;
break;
case 1:
reset = GPIO_PC_RESET1;
break;
default:
return -ENXIO;
}
if (state->flags & SS_RESET)
GPSR = reset;
else
GPCR = reset;
return 0;
}
static void nanoengine_pcmcia_socket_state(
struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
{
unsigned long levels = GPLR;
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
memset(state, 0, sizeof(struct pcmcia_state));
switch (i) {
case 0:
state->ready = (levels & GPIO_PC_READY0) ? 1 : 0;
state->detect = !(levels & GPIO_PC_CD0) ? 1 : 0;
break;
case 1:
state->ready = (levels & GPIO_PC_READY1) ? 1 : 0;
state->detect = !(levels & GPIO_PC_CD1) ? 1 : 0;
break;
default:
return;
}
state->bvd1 = 1;
state->bvd2 = 1;
state->wrprot = 0; /* Not available */
state->vs_3v = 1; /* Can only apply 3.3V */
state->vs_Xv = 0;
}
/*
* Enable card status IRQs on (re-)initialisation. This can
* be called at initialisation, power management event, or
* pcmcia event.
*/
static void nanoengine_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
soc_pcmcia_enable_irqs(skt,
nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
}
/*
* Disable card status IRQs on suspend.
*/
static void nanoengine_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
{
unsigned i = skt->nr;
if (i >= num_nano_pcmcia_sockets)
return;
soc_pcmcia_disable_irqs(skt,
nano_skts[i].pcmcia_irqs, nano_skts[i].pcmcia_irqs_size);
}
static struct pcmcia_low_level nanoengine_pcmcia_ops = {
.owner = THIS_MODULE,
.hw_init = nanoengine_pcmcia_hw_init,
.hw_shutdown = nanoengine_pcmcia_hw_shutdown,
.configure_socket = nanoengine_pcmcia_configure_socket,
.socket_state = nanoengine_pcmcia_socket_state,
.socket_init = nanoengine_pcmcia_socket_init,
.socket_suspend = nanoengine_pcmcia_socket_suspend,
};
int pcmcia_nanoengine_init(struct device *dev)
{
int ret = -ENODEV;
if (machine_is_nanoengine())
ret = sa11xx_drv_pcmcia_probe(
dev, &nanoengine_pcmcia_ops, 0, 2);
return ret;
}

130
drivers/pcmcia/soc_common.c
Просмотреть файл

@ -31,20 +31,20 @@
======================================================================*/
#include <linux/cpufreq.h>
#include <linux/init.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/irq.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/mutex.h>
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/spinlock.h>
#include <linux/cpufreq.h>
#include <linux/timer.h>
#include <mach/hardware.h>
#include <asm/io.h>
#include <asm/system.h>
#include "soc_common.h"
@ -74,7 +74,8 @@ EXPORT_SYMBOL(soc_pcmcia_debug);
#endif
#define to_soc_pcmcia_socket(x) container_of(x, struct soc_pcmcia_socket, socket)
#define to_soc_pcmcia_socket(x) \
container_of(x, struct soc_pcmcia_socket, socket)
static unsigned short
calc_speed(unsigned short *spds, int num, unsigned short dflt)
@ -91,11 +92,15 @@ calc_speed(unsigned short *spds, int num, unsigned short dflt)
return speed;
}
void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt, struct soc_pcmcia_timing *timing)
void soc_common_pcmcia_get_timing(struct soc_pcmcia_socket *skt,
struct soc_pcmcia_timing *timing)
{
timing->io = calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS);
timing->mem = calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
timing->attr = calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
timing->io =
calc_speed(skt->spd_io, MAX_IO_WIN, SOC_PCMCIA_IO_ACCESS);
timing->mem =
calc_speed(skt->spd_mem, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
timing->attr =
calc_speed(skt->spd_attr, MAX_WIN, SOC_PCMCIA_3V_MEM_ACCESS);
}
EXPORT_SYMBOL(soc_common_pcmcia_get_timing);
@ -137,8 +142,8 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt)
*
* Convert PCMCIA socket state to our socket configure structure.
*/
static int
soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *state)
static int soc_common_pcmcia_config_skt(
struct soc_pcmcia_socket *skt, socket_state_t *state)
{
int ret;
@ -150,7 +155,8 @@ soc_common_pcmcia_config_skt(struct soc_pcmcia_socket *skt, socket_state_t *stat
*/
if (skt->irq_state != 1 && state->io_irq) {
skt->irq_state = 1;
set_irq_type(skt->socket.pci_irq, IRQ_TYPE_EDGE_FALLING);
set_irq_type(skt->socket.pci_irq,
IRQ_TYPE_EDGE_FALLING);
} else if (skt->irq_state == 1 && state->io_irq == 0) {
skt->irq_state = 0;
set_irq_type(skt->socket.pci_irq, IRQ_TYPE_NONE);
@ -304,24 +310,24 @@ soc_common_pcmcia_get_status(struct pcmcia_socket *sock, unsigned int *status)
* of power configuration, reset, &c. We also record the value of
* `state' in order to regurgitate it to the PCMCIA core later.
*/
static int
soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
static int soc_common_pcmcia_set_socket(
struct pcmcia_socket *sock, socket_state_t *state)
{
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
debug(skt, 2, "mask: %s%s%s%s%s%sflags: %s%s%s%s%s%sVcc %d Vpp %d irq %d\n",
(state->csc_mask==0)?"<NONE> ":"",
(state->csc_mask&SS_DETECT)?"DETECT ":"",
(state->csc_mask&SS_READY)?"READY ":"",
(state->csc_mask&SS_BATDEAD)?"BATDEAD ":"",
(state->csc_mask&SS_BATWARN)?"BATWARN ":"",
(state->csc_mask&SS_STSCHG)?"STSCHG ":"",
(state->flags==0)?"<NONE> ":"",
(state->flags&SS_PWR_AUTO)?"PWR_AUTO ":"",
(state->flags&SS_IOCARD)?"IOCARD ":"",
(state->flags&SS_RESET)?"RESET ":"",
(state->flags&SS_SPKR_ENA)?"SPKR_ENA ":"",
(state->flags&SS_OUTPUT_ENA)?"OUTPUT_ENA ":"",
debug(skt, 2, "mask: %s%s%s%s%s%s flags: %s%s%s%s%s%s Vcc %d Vpp %d irq %d\n",
(state->csc_mask == 0) ? "<NONE> " : "",
(state->csc_mask & SS_DETECT) ? "DETECT " : "",
(state->csc_mask & SS_READY) ? "READY " : "",
(state->csc_mask & SS_BATDEAD) ? "BATDEAD " : "",
(state->csc_mask & SS_BATWARN) ? "BATWARN " : "",
(state->csc_mask & SS_STSCHG) ? "STSCHG " : "",
(state->flags == 0) ? "<NONE> " : "",
(state->flags & SS_PWR_AUTO) ? "PWR_AUTO " : "",
(state->flags & SS_IOCARD) ? "IOCARD " : "",
(state->flags & SS_RESET) ? "RESET " : "",
(state->flags & SS_SPKR_ENA) ? "SPKR_ENA " : "",
(state->flags & SS_OUTPUT_ENA) ? "OUTPUT_ENA " : "",
state->Vcc, state->Vpp, state->io_irq);
return soc_common_pcmcia_config_skt(skt, state);
@ -336,8 +342,8 @@ soc_common_pcmcia_set_socket(struct pcmcia_socket *sock, socket_state_t *state)
*
* Returns: 0 on success, -1 on error
*/
static int
soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *map)
static int soc_common_pcmcia_set_io_map(
struct pcmcia_socket *sock, struct pccard_io_map *map)
{
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
unsigned short speed = map->speed;
@ -346,14 +352,14 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
map->map, map->speed, (unsigned long long)map->start,
(unsigned long long)map->stop);
debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
(map->flags==0)?"<NONE>":"",
(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
(map->flags&MAP_16BIT)?"16BIT ":"",
(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
(map->flags&MAP_0WS)?"0WS ":"",
(map->flags&MAP_WRPROT)?"WRPROT ":"",
(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"",
(map->flags&MAP_PREFETCH)?"PREFETCH ":"");
(map->flags == 0) ? "<NONE>" : "",
(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
(map->flags & MAP_16BIT) ? "16BIT " : "",
(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
(map->flags & MAP_0WS) ? "0WS " : "",
(map->flags & MAP_WRPROT) ? "WRPROT " : "",
(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "",
(map->flags & MAP_PREFETCH) ? "PREFETCH " : "");
if (map->map >= MAX_IO_WIN) {
printk(KERN_ERR "%s(): map (%d) out of range\n", __func__,
@ -390,8 +396,8 @@ soc_common_pcmcia_set_io_map(struct pcmcia_socket *sock, struct pccard_io_map *m
*
* Returns: 0 on success, -ERRNO on error
*/
static int
soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map *map)
static int soc_common_pcmcia_set_mem_map(
struct pcmcia_socket *sock, struct pccard_mem_map *map)
{
struct soc_pcmcia_socket *skt = to_soc_pcmcia_socket(sock);
struct resource *res;
@ -400,14 +406,14 @@ soc_common_pcmcia_set_mem_map(struct pcmcia_socket *sock, struct pccard_mem_map
debug(skt, 2, "map %u speed %u card_start %08x\n",
map->map, map->speed, map->card_start);
debug(skt, 2, "flags: %s%s%s%s%s%s%s%s\n",
(map->flags==0)?"<NONE>":"",
(map->flags&MAP_ACTIVE)?"ACTIVE ":"",
(map->flags&MAP_16BIT)?"16BIT ":"",
(map->flags&MAP_AUTOSZ)?"AUTOSZ ":"",
(map->flags&MAP_0WS)?"0WS ":"",
(map->flags&MAP_WRPROT)?"WRPROT ":"",
(map->flags&MAP_ATTRIB)?"ATTRIB ":"",
(map->flags&MAP_USE_WAIT)?"USE_WAIT ":"");
(map->flags == 0) ? "<NONE>" : "",
(map->flags & MAP_ACTIVE) ? "ACTIVE " : "",
(map->flags & MAP_16BIT) ? "16BIT " : "",
(map->flags & MAP_AUTOSZ) ? "AUTOSZ " : "",
(map->flags & MAP_0WS) ? "0WS " : "",
(map->flags & MAP_WRPROT) ? "WRPROT " : "",
(map->flags & MAP_ATTRIB) ? "ATTRIB " : "",
(map->flags & MAP_USE_WAIT) ? "USE_WAIT " : "");
if (map->map >= MAX_WIN)
return -EINVAL;
@ -462,8 +468,8 @@ static struct bittbl conf_bits[] = {
{ SS_OUTPUT_ENA, "SS_OUTPUT_ENA" },
};
static void
dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, int sz)
static void dump_bits(char **p, const char *prefix,
unsigned int val, struct bittbl *bits, int sz)
{
char *b = *p;
int i;
@ -481,13 +487,14 @@ dump_bits(char **p, const char *prefix, unsigned int val, struct bittbl *bits, i
*
* Returns: the number of characters added to the buffer
*/
static ssize_t show_status(struct device *dev, struct device_attribute *attr, char *buf)
static ssize_t show_status(
struct device *dev, struct device_attribute *attr, char *buf)
{
struct soc_pcmcia_socket *skt =
container_of(dev, struct soc_pcmcia_socket, socket.dev);
char *p = buf;
p+=sprintf(p, "slot : %d\n", skt->nr);
p += sprintf(p, "slot : %d\n", skt->nr);
dump_bits(&p, "status", skt->status,
status_bits, ARRAY_SIZE(status_bits));
@ -496,12 +503,12 @@ static ssize_t show_status(struct device *dev, struct device_attribute *attr, ch
dump_bits(&p, "cs_flags", skt->cs_state.flags,
conf_bits, ARRAY_SIZE(conf_bits));
p+=sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc);
p+=sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp);
p+=sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq,
p += sprintf(p, "Vcc : %d\n", skt->cs_state.Vcc);
p += sprintf(p, "Vpp : %d\n", skt->cs_state.Vpp);
p += sprintf(p, "IRQ : %d (%d)\n", skt->cs_state.io_irq,
skt->socket.pci_irq);
if (skt->ops->show_timing)
p+=skt->ops->show_timing(skt, p);
p += skt->ops->show_timing(skt, p);
return p-buf;
}
@ -594,7 +601,7 @@ soc_pcmcia_notifier(struct notifier_block *nb, unsigned long val, void *data)
mutex_lock(&soc_pcmcia_sockets_lock);
list_for_each_entry(skt, &soc_pcmcia_sockets, node)
if ( skt->ops->frequency_change )
if (skt->ops->frequency_change)
ret += skt->ops->frequency_change(skt, val, freqs);
mutex_unlock(&soc_pcmcia_sockets_lock);
@ -620,7 +627,8 @@ fs_initcall(soc_pcmcia_cpufreq_register);
static void soc_pcmcia_cpufreq_unregister(void)
{
cpufreq_unregister_notifier(&soc_pcmcia_notifier_block, CPUFREQ_TRANSITION_NOTIFIER);
cpufreq_unregister_notifier(&soc_pcmcia_notifier_block,
CPUFREQ_TRANSITION_NOTIFIER);
}
module_exit(soc_pcmcia_cpufreq_unregister);

161
drivers/rtc/rtc-sa1100.c
Просмотреть файл

@ -39,10 +39,10 @@
#include <mach/regs-ost.h>
#endif
#define RTC_DEF_DIVIDER 32768 - 1
#define RTC_DEF_DIVIDER (32768 - 1)
#define RTC_DEF_TRIM 0
static unsigned long rtc_freq = 1024;
static const unsigned long RTC_FREQ = 1024;
static unsigned long timer_freq;
static struct rtc_time rtc_alarm;
static DEFINE_SPINLOCK(sa1100_rtc_lock);
@ -61,7 +61,8 @@ static inline int rtc_periodic_alarm(struct rtc_time *tm)
* Calculate the next alarm time given the requested alarm time mask
* and the current time.
*/
static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now, struct rtc_time *alrm)
static void rtc_next_alarm_time(struct rtc_time *next, struct rtc_time *now,
struct rtc_time *alrm)
{
unsigned long next_time;
unsigned long now_time;
@ -116,7 +117,23 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
rtsr = RTSR;
/* clear interrupt sources */
RTSR = 0;
RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_probe(). */
if (rtsr & (RTSR_ALE | RTSR_HZE)) {
/* This is the original code, before there was the if test
* above. This code does not clear interrupts that were not
* enabled. */
RTSR = (RTSR_AL | RTSR_HZ) & (rtsr >> 2);
} else {
/* For some reason, it is possible to enter this routine
* without interruptions enabled, it has been tested with
* several units (Bug in SA11xx chip?).
*
* This situation leads to an infinite "loop" of interrupt
* routine calling and as a result the processor seems to
* lock on its first call to open(). */
RTSR = RTSR_AL | RTSR_HZ;
}
/* clear alarm interrupt if it has occurred */
if (rtsr & RTSR_AL)
@ -139,8 +156,58 @@ static irqreturn_t sa1100_rtc_interrupt(int irq, void *dev_id)
return IRQ_HANDLED;
}
static int sa1100_irq_set_freq(struct device *dev, int freq)
{
if (freq < 1 || freq > timer_freq) {
return -EINVAL;
} else {
struct rtc_device *rtc = (struct rtc_device *)dev;
rtc->irq_freq = freq;
return 0;
}
}
static int rtc_timer1_count;
static int sa1100_irq_set_state(struct device *dev, int enabled)
{
spin_lock_irq(&sa1100_rtc_lock);
if (enabled) {
struct rtc_device *rtc = (struct rtc_device *)dev;
OSMR1 = timer_freq / rtc->irq_freq + OSCR;
OIER |= OIER_E1;
rtc_timer1_count = 1;
} else {
OIER &= ~OIER_E1;
}
spin_unlock_irq(&sa1100_rtc_lock);
return 0;
}
static inline int sa1100_timer1_retrigger(struct rtc_device *rtc)
{
unsigned long diff;
unsigned long period = timer_freq / rtc->irq_freq;
spin_lock_irq(&sa1100_rtc_lock);
do {
OSMR1 += period;
diff = OSMR1 - OSCR;
/* If OSCR > OSMR1, diff is a very large number (unsigned
* math). This means we have a lost interrupt. */
} while (diff > period);
OIER |= OIER_E1;
spin_unlock_irq(&sa1100_rtc_lock);
return 0;
}
static irqreturn_t timer1_interrupt(int irq, void *dev_id)
{
struct platform_device *pdev = to_platform_device(dev_id);
@ -158,7 +225,11 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
rtc_update_irq(rtc, rtc_timer1_count, RTC_PF | RTC_IRQF);
if (rtc_timer1_count == 1)
rtc_timer1_count = (rtc_freq * ((1 << 30) / (timer_freq >> 2)));
rtc_timer1_count =
(rtc->irq_freq * ((1 << 30) / (timer_freq >> 2)));
/* retrigger. */
sa1100_timer1_retrigger(rtc);
return IRQ_HANDLED;
}
@ -166,8 +237,10 @@ static irqreturn_t timer1_interrupt(int irq, void *dev_id)
static int sa1100_rtc_read_callback(struct device *dev, int data)
{
if (data & RTC_PF) {
struct rtc_device *rtc = (struct rtc_device *)dev;
/* interpolate missed periods and set match for the next */
unsigned long period = timer_freq / rtc_freq;
unsigned long period = timer_freq / rtc->irq_freq;
unsigned long oscr = OSCR;
unsigned long osmr1 = OSMR1;
unsigned long missed = (oscr - osmr1)/period;
@ -178,7 +251,7 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
* Here we compare (match - OSCR) 8 instead of 0 --
* see comment in pxa_timer_interrupt() for explanation.
*/
while( (signed long)((osmr1 = OSMR1) - OSCR) <= 8 ) {
while ((signed long)((osmr1 = OSMR1) - OSCR) <= 8) {
data += 0x100;
OSSR = OSSR_M1; /* clear match on timer 1 */
OSMR1 = osmr1 + period;
@ -190,25 +263,29 @@ static int sa1100_rtc_read_callback(struct device *dev, int data)
static int sa1100_rtc_open(struct device *dev)
{
int ret;
struct rtc_device *rtc = (struct rtc_device *)dev;
ret = request_irq(IRQ_RTC1Hz, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc 1Hz", dev);
"rtc 1Hz", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_RTC1Hz);
goto fail_ui;
}
ret = request_irq(IRQ_RTCAlrm, sa1100_rtc_interrupt, IRQF_DISABLED,
"rtc Alrm", dev);
"rtc Alrm", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_RTCAlrm);
goto fail_ai;
}
ret = request_irq(IRQ_OST1, timer1_interrupt, IRQF_DISABLED,
"rtc timer", dev);
"rtc timer", dev);
if (ret) {
dev_err(dev, "IRQ %d already in use.\n", IRQ_OST1);
goto fail_pi;
}
rtc->max_user_freq = RTC_FREQ;
sa1100_irq_set_freq(dev, RTC_FREQ);
return 0;
fail_pi:
@ -236,7 +313,7 @@ static void sa1100_rtc_release(struct device *dev)
static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
unsigned long arg)
{
switch(cmd) {
switch (cmd) {
case RTC_AIE_OFF:
spin_lock_irq(&sa1100_rtc_lock);
RTSR &= ~RTSR_ALE;
@ -257,25 +334,6 @@ static int sa1100_rtc_ioctl(struct device *dev, unsigned int cmd,
RTSR |= RTSR_HZE;
spin_unlock_irq(&sa1100_rtc_lock);
return 0;
case RTC_PIE_OFF:
spin_lock_irq(&sa1100_rtc_lock);
OIER &= ~OIER_E1;
spin_unlock_irq(&sa1100_rtc_lock);
return 0;
case RTC_PIE_ON:
spin_lock_irq(&sa1100_rtc_lock);
OSMR1 = timer_freq / rtc_freq + OSCR;
OIER |= OIER_E1;
rtc_timer1_count = 1;
spin_unlock_irq(&sa1100_rtc_lock);
return 0;
case RTC_IRQP_READ:
return put_user(rtc_freq, (unsigned long *)arg);
case RTC_IRQP_SET:
if (arg < 1 || arg > timer_freq)
return -EINVAL;
rtc_freq = arg;
return 0;
}
return -ENOIOCTLCMD;
}
@ -327,12 +385,15 @@ static int sa1100_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
static int sa1100_rtc_proc(struct device *dev, struct seq_file *seq)
{
struct rtc_device *rtc = (struct rtc_device *)dev;
seq_printf(seq, "trim/divider\t: 0x%08x\n", (u32) RTTR);
seq_printf(seq, "update_IRQ\t: %s\n",
(RTSR & RTSR_HZE) ? "yes" : "no");
seq_printf(seq, "periodic_IRQ\t: %s\n",
(OIER & OIER_E1) ? "yes" : "no");
seq_printf(seq, "periodic_freq\t: %ld\n", rtc_freq);
seq_printf(seq, "periodic_freq\t: %d\n", rtc->irq_freq);
seq_printf(seq, "RTSR\t\t: 0x%08x\n", (u32)RTSR);
return 0;
}
@ -347,6 +408,8 @@ static const struct rtc_class_ops sa1100_rtc_ops = {
.read_alarm = sa1100_rtc_read_alarm,
.set_alarm = sa1100_rtc_set_alarm,
.proc = sa1100_rtc_proc,
.irq_set_freq = sa1100_irq_set_freq,
.irq_set_state = sa1100_irq_set_state,
};
static int sa1100_rtc_probe(struct platform_device *pdev)
@ -364,7 +427,8 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
*/
if (RTTR == 0) {
RTTR = RTC_DEF_DIVIDER + (RTC_DEF_TRIM << 16);
dev_warn(&pdev->dev, "warning: initializing default clock divider/trim value\n");
dev_warn(&pdev->dev, "warning: "
"initializing default clock divider/trim value\n");
/* The current RTC value probably doesn't make sense either */
RCNR = 0;
}
@ -372,13 +436,42 @@ static int sa1100_rtc_probe(struct platform_device *pdev)
device_init_wakeup(&pdev->dev, 1);
rtc = rtc_device_register(pdev->name, &pdev->dev, &sa1100_rtc_ops,
THIS_MODULE);
THIS_MODULE);
if (IS_ERR(rtc))
return PTR_ERR(rtc);
platform_set_drvdata(pdev, rtc);
/* Set the irq_freq */
/*TODO: Find out who is messing with this value after we initialize
* it here.*/
rtc->irq_freq = RTC_FREQ;
/* Fix for a nasty initialization problem the in SA11xx RTSR register.
* See also the comments in sa1100_rtc_interrupt().
*
* Sometimes bit 1 of the RTSR (RTSR_HZ) will wake up 1, which means an
* interrupt pending, even though interrupts were never enabled.
* In this case, this bit it must be reset before enabling
* interruptions to avoid a nonexistent interrupt to occur.
*
* In principle, the same problem would apply to bit 0, although it has
* never been observed to happen.
*
* This issue is addressed both here and in sa1100_rtc_interrupt().
* If the issue is not addressed here, in the times when the processor
* wakes up with the bit set there will be one spurious interrupt.
*
* The issue is also dealt with in sa1100_rtc_interrupt() to be on the
* safe side, once the condition that lead to this strange
* initialization is unknown and could in principle happen during
* normal processing.
*
* Notice that clearing bit 1 and 0 is accomplished by writting ONES to
* the corresponding bits in RTSR. */
RTSR = RTSR_AL | RTSR_HZ;
return 0;
}
@ -386,7 +479,7 @@ static int sa1100_rtc_remove(struct platform_device *pdev)
{
struct rtc_device *rtc = platform_get_drvdata(pdev);
if (rtc)
if (rtc)
rtc_device_unregister(rtc);
return 0;

2
fs/proc/vmcore.c
Просмотреть файл

@ -499,7 +499,7 @@ static int __init parse_crash_elf64_headers(void)
/* Do some basic Verification. */
if (memcmp(ehdr.e_ident, ELFMAG, SELFMAG) != 0 ||
(ehdr.e_type != ET_CORE) ||
!vmcore_elf_check_arch(&ehdr) ||
!vmcore_elf64_check_arch(&ehdr) ||
ehdr.e_ident[EI_CLASS] != ELFCLASS64 ||
ehdr.e_ident[EI_VERSION] != EV_CURRENT ||
ehdr.e_version != EV_CURRENT ||

9
include/linux/crash_dump.h
Просмотреть файл

@ -20,7 +20,14 @@ extern ssize_t copy_oldmem_page(unsigned long, char *, size_t,
#define vmcore_elf_check_arch_cross(x) 0
#endif
#define vmcore_elf_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
/*
* Architecture code can redefine this if there are any special checks
* needed for 64-bit ELF vmcores. In case of 32-bit only architecture,
* this can be set to zero.
*/
#ifndef vmcore_elf64_check_arch
#define vmcore_elf64_check_arch(x) (elf_check_arch(x) || vmcore_elf_check_arch_cross(x))
#endif
/*
* is_kdump_kernel() checks whether this kernel is booting after a panic of

7
scripts/recordmcount.c
Просмотреть файл

@ -38,6 +38,7 @@ static void *ehdr_curr; /* current ElfXX_Ehdr * for resource cleanup */
static char gpfx; /* prefix for global symbol name (sometimes '_') */
static struct stat sb; /* Remember .st_size, etc. */
static jmp_buf jmpenv; /* setjmp/longjmp per-file error escape */
static const char *altmcount; /* alternate mcount symbol name */
/* setjmp() return values */
enum {
@ -299,7 +300,9 @@ do_file(char const *const fname)
fail_file();
} break;
case EM_386: reltype = R_386_32; break;
case EM_ARM: reltype = R_ARM_ABS32; break;
case EM_ARM: reltype = R_ARM_ABS32;
altmcount = "__gnu_mcount_nc";
break;
case EM_IA_64: reltype = R_IA64_IMM64; gpfx = '_'; break;
case EM_MIPS: /* reltype: e_class */ gpfx = '_'; break;
case EM_PPC: reltype = R_PPC_ADDR32; gpfx = '_'; break;
@ -357,7 +360,7 @@ do_file(char const *const fname)
int
main(int argc, char const *argv[])
{
const char ftrace[] = "kernel/trace/ftrace.o";
const char ftrace[] = "/ftrace.o";
int ftrace_size = sizeof(ftrace) - 1;
int n_error = 0; /* gcc-4.3.0 false positive complaint */

5
scripts/recordmcount.h
Просмотреть файл

@ -275,11 +275,12 @@ static uint_t *sift_rel_mcount(uint_t *mlocp,
Elf_Sym const *const symp =
&sym0[Elf_r_sym(relp)];
char const *symname = &str0[w(symp->st_name)];
char const *mcount = '_' == gpfx ? "_mcount" : "mcount";
if ('.' == symname[0])
++symname; /* ppc64 hack */
if (0 == strcmp((('_' == gpfx) ? "_mcount" : "mcount"),
symname))
if (0 == strcmp(mcount, symname) ||
(altmcount && 0 == strcmp(altmcount, symname)))
mcountsym = Elf_r_sym(relp);
}