microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

USB fixes for 4.12-rc2 

Here are a number of small USB fixes for 4.12-rc2
 
 Most of them come from Johan, in his valiant quest to fix up all drivers
 that could be affected by "malicious" USB devices.  There's also some
 fixes for more "obscure" drivers to handle some of the vmalloc stack
 fallout (which for USB drivers, was always the case, but very few people
 actually ran those systems...)
 
 Other than that, the normal set of xhci and gadget and musb driver fixes
 as well.
 
 All have been in linux-next with no reported issues.
 
 Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 -----BEGIN PGP SIGNATURE-----
 
 iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWSBFyw8cZ3JlZ0Brcm9h
 aC5jb20ACgkQMUfUDdst+ynwXQCfUS3wnmibc98aJK/lr1Cc6a1eyWwAoIOhXmCh
 kJXFARSJOiHl5SdtNrdm
 =/5EP
 -----END PGP SIGNATURE-----

Merge tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are a number of small USB fixes for 4.12-rc2

  Most of them come from Johan, in his valiant quest to fix up all
  drivers that could be affected by "malicious" USB devices. There's
  also some fixes for more "obscure" drivers to handle some of the
  vmalloc stack fallout (which for USB drivers, was always the case, but
  very few people actually ran those systems...)

  Other than that, the normal set of xhci and gadget and musb driver
  fixes as well.

  All have been in linux-next with no reported issues"

* tag 'usb-4.12-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (42 commits)
  usb: musb: tusb6010_omap: Do not reset the other direction's packet size
  usb: musb: Fix trying to suspend while active for OTG configurations
  usb: host: xhci-plat: propagate return value of platform_get_irq()
  xhci: Fix command ring stop regression in 4.11
  xhci: remove GFP_DMA flag from allocation
  USB: xhci: fix lock-inversion problem
  usb: host: xhci-ring: don't need to clear interrupt pending for MSI enabled hcd
  usb: host: xhci-mem: allocate zeroed Scratchpad Buffer
  xhci: apply PME_STUCK_QUIRK and MISSING_CAS quirk for Denverton
  usb: xhci: trace URB before giving it back instead of after
  USB: serial: qcserial: add more Lenovo EM74xx device IDs
  USB: host: xhci: use max-port define
  USB: hub: fix SS max number of ports
  USB: hub: fix non-SS hub-descriptor handling
  USB: hub: fix SS hub-descriptor handling
  USB: usbip: fix nonconforming hub descriptor
  USB: gadget: dummy_hcd: fix hub-descriptor removable fields
  doc-rst: fixed kernel-doc directives in usb/typec.rst
  USB: core: of: document reference taken by companion helper
  USB: ehci-platform: fix companion-device leak
  ...
This commit is contained in:
Linus Torvalds 2017-05-20 08:52:34 -07:00
Родитель 331da109ec b51e0ceed1
Коммит 3202629345
38 изменённых файлов: 232 добавлений и 126 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

6
Documentation/usb/typec.rst
Просмотреть файл

@ -114,8 +114,7 @@ the details during registration. The class offers the following API for
registering/unregistering cables and their plugs:
.. kernel-doc:: drivers/usb/typec/typec.c
:functions: typec_register_cable typec_unregister_cable typec_register_plug
typec_unregister_plug
:functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug
The class will provide a handle to struct typec_cable and struct typec_plug if
the registration is successful, or NULL if it isn't.
@ -137,8 +136,7 @@ during connection of a partner or cable, the port driver must use the following
APIs to report it to the class:
.. kernel-doc:: drivers/usb/typec/typec.c
:functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role
typec_set_pwr_opmode
:functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode
Alternate Modes
~~~~~~~~~~~~~~~

14
drivers/usb/core/devio.c
Просмотреть файл

@ -475,11 +475,11 @@ static void snoop_urb(struct usb_device *udev,
if (userurb) { /* Async */
if (when == SUBMIT)
dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
"length %u\n",
userurb, ep, t, d, length);
else
dev_info(&udev->dev, "userurb %p, ep%d %s-%s, "
dev_info(&udev->dev, "userurb %pK, ep%d %s-%s, "
"actual_length %u status %d\n",
userurb, ep, t, d, length,
timeout_or_status);
@ -1895,7 +1895,7 @@ static int proc_reapurb(struct usb_dev_state *ps, void __user *arg)
if (as) {
int retval;
snoop(&ps->dev->dev, "reap %p\n", as->userurb);
snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
return retval;
@ -1912,7 +1912,7 @@ static int proc_reapurbnonblock(struct usb_dev_state *ps, void __user *arg)
as = async_getcompleted(ps);
if (as) {
snoop(&ps->dev->dev, "reap %p\n", as->userurb);
snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl(as, (void __user * __user *)arg);
free_async(as);
} else {
@ -2043,7 +2043,7 @@ static int proc_reapurb_compat(struct usb_dev_state *ps, void __user *arg)
if (as) {
int retval;
snoop(&ps->dev->dev, "reap %p\n", as->userurb);
snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
return retval;
@ -2060,7 +2060,7 @@ static int proc_reapurbnonblock_compat(struct usb_dev_state *ps, void __user *ar
as = async_getcompleted(ps);
if (as) {
snoop(&ps->dev->dev, "reap %p\n", as->userurb);
snoop(&ps->dev->dev, "reap %pK\n", as->userurb);
retval = processcompl_compat(as, (void __user * __user *)arg);
free_async(as);
} else {
@ -2489,7 +2489,7 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd,
#endif
case USBDEVFS_DISCARDURB:
snoop(&dev->dev, "%s: DISCARDURB %p\n", __func__, p);
snoop(&dev->dev, "%s: DISCARDURB %pK\n", __func__, p);
ret = proc_unlinkurb(ps, p);
break;

5
drivers/usb/core/hcd.c
Просмотреть файл

@ -1723,7 +1723,7 @@ int usb_hcd_unlink_urb (struct urb *urb, int status)
if (retval == 0)
retval = -EINPROGRESS;
else if (retval != -EIDRM && retval != -EBUSY)
dev_dbg(&udev->dev, "hcd_unlink_urb %p fail %d\n",
dev_dbg(&udev->dev, "hcd_unlink_urb %pK fail %d\n",
urb, retval);
usb_put_dev(udev);
}
@ -1890,7 +1890,7 @@ rescan:
/* kick hcd */
unlink1(hcd, urb, -ESHUTDOWN);
dev_dbg (hcd->self.controller,
"shutdown urb %p ep%d%s%s\n",
"shutdown urb %pK ep%d%s%s\n",
urb, usb_endpoint_num(&ep->desc),
is_in ? "in" : "out",
({ char *s;
@ -2520,6 +2520,7 @@ struct usb_hcd *__usb_create_hcd(const struct hc_driver *driver,
hcd->bandwidth_mutex = kmalloc(sizeof(*hcd->bandwidth_mutex),
GFP_KERNEL);
if (!hcd->bandwidth_mutex) {
kfree(hcd->address0_mutex);
kfree(hcd);
dev_dbg(dev, "hcd bandwidth mutex alloc failed\n");
return NULL;

27
drivers/usb/core/hub.c
Просмотреть файл

@ -362,7 +362,8 @@ static void usb_set_lpm_parameters(struct usb_device *udev)
}
/* USB 2.0 spec Section 11.24.4.5 */
static int get_hub_descriptor(struct usb_device *hdev, void *data)
static int get_hub_descriptor(struct usb_device *hdev,
struct usb_hub_descriptor *desc)
{
int i, ret, size;
unsigned dtype;
@ -378,10 +379,18 @@ static int get_hub_descriptor(struct usb_device *hdev, void *data)
for (i = 0; i < 3; i++) {
ret = usb_control_msg(hdev, usb_rcvctrlpipe(hdev, 0),
USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB,
dtype << 8, 0, data, size,
dtype << 8, 0, desc, size,
USB_CTRL_GET_TIMEOUT);
if (ret >= (USB_DT_HUB_NONVAR_SIZE + 2))
if (hub_is_superspeed(hdev)) {
if (ret == size)
return ret;
} else if (ret >= USB_DT_HUB_NONVAR_SIZE + 2) {
/* Make sure we have the DeviceRemovable field. */
size = USB_DT_HUB_NONVAR_SIZE + desc->bNbrPorts / 8 + 1;
if (ret < size)
return -EMSGSIZE;
return ret;
}
}
return -EINVAL;
}
@ -1313,7 +1322,7 @@ static int hub_configure(struct usb_hub *hub,
}
mutex_init(&hub->status_mutex);
hub->descriptor = kmalloc(sizeof(*hub->descriptor), GFP_KERNEL);
hub->descriptor = kzalloc(sizeof(*hub->descriptor), GFP_KERNEL);
if (!hub->descriptor) {
ret = -ENOMEM;
goto fail;
@ -1321,13 +1330,19 @@ static int hub_configure(struct usb_hub *hub,
/* Request the entire hub descriptor.
* hub->descriptor can handle USB_MAXCHILDREN ports,
* but the hub can/will return fewer bytes here.
* but a (non-SS) hub can/will return fewer bytes here.
*/
ret = get_hub_descriptor(hdev, hub->descriptor);
if (ret < 0) {
message = "can't read hub descriptor";
goto fail;
} else if (hub->descriptor->bNbrPorts > USB_MAXCHILDREN) {
}
maxchild = USB_MAXCHILDREN;
if (hub_is_superspeed(hdev))
maxchild = min_t(unsigned, maxchild, USB_SS_MAXPORTS);
if (hub->descriptor->bNbrPorts > maxchild) {
message = "hub has too many ports!";
ret = -ENODEV;
goto fail;

3
drivers/usb/core/of.c
Просмотреть файл

@ -53,6 +53,9 @@ EXPORT_SYMBOL_GPL(usb_of_get_child_node);
*
* Find the companion device from platform bus.
*
* Takes a reference to the returned struct device which needs to be dropped
* after use.
*
* Return: On success, a pointer to the companion device, %NULL on failure.
*/
struct device *usb_of_get_companion_dev(struct device *dev)

2
drivers/usb/core/urb.c
Просмотреть файл

@ -338,7 +338,7 @@ int usb_submit_urb(struct urb *urb, gfp_t mem_flags)
if (!urb || !urb->complete)
return -EINVAL;
if (urb->hcpriv) {
WARN_ONCE(1, "URB %p submitted while active\n", urb);
WARN_ONCE(1, "URB %pK submitted while active\n", urb);
return -EBUSY;
}

4
drivers/usb/dwc3/dwc3-keystone.c
Просмотреть файл

@ -107,6 +107,10 @@ static int kdwc3_probe(struct platform_device *pdev)
return PTR_ERR(kdwc->usbss);
kdwc->clk = devm_clk_get(kdwc->dev, "usb");
if (IS_ERR(kdwc->clk)) {
dev_err(kdwc->dev, "unable to get usb clock\n");
return PTR_ERR(kdwc->clk);
}
error = clk_prepare_enable(kdwc->clk);
if (error < 0) {

4
drivers/usb/dwc3/dwc3-pci.c
Просмотреть файл

@ -39,6 +39,8 @@
#define PCI_DEVICE_ID_INTEL_APL 0x5aaa
#define PCI_DEVICE_ID_INTEL_KBP 0xa2b0
#define PCI_DEVICE_ID_INTEL_GLK 0x31aa
#define PCI_DEVICE_ID_INTEL_CNPLP 0x9dee
#define PCI_DEVICE_ID_INTEL_CNPH 0xa36e
#define PCI_INTEL_BXT_DSM_UUID "732b85d5-b7a7-4a1b-9ba0-4bbd00ffd511"
#define PCI_INTEL_BXT_FUNC_PMU_PWR 4
@ -270,6 +272,8 @@ static const struct pci_device_id dwc3_pci_id_table[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_APL), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KBP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_GLK), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPLP), },
{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CNPH), },
{ PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_NL_USB), },
{ } /* Terminating Entry */
};

21
drivers/usb/dwc3/gadget.c
Просмотреть файл

@ -1261,14 +1261,24 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req)
__dwc3_gadget_start_isoc(dwc, dep, cur_uf);
dep->flags &= ~DWC3_EP_PENDING_REQUEST;
}
return 0;
}
return 0;
if ((dep->flags & DWC3_EP_BUSY) &&
!(dep->flags & DWC3_EP_MISSED_ISOC)) {
WARN_ON_ONCE(!dep->resource_index);
ret = __dwc3_gadget_kick_transfer(dep,
dep->resource_index);
}
goto out;
}
if (!dwc3_calc_trbs_left(dep))
return 0;
ret = __dwc3_gadget_kick_transfer(dep, 0);
out:
if (ret == -EBUSY)
ret = 0;
@ -3026,6 +3036,15 @@ static irqreturn_t dwc3_check_event_buf(struct dwc3_event_buffer *evt)
return IRQ_HANDLED;
}
/*
* With PCIe legacy interrupt, test shows that top-half irq handler can
* be called again after HW interrupt deassertion. Check if bottom-half
* irq event handler completes before caching new event to prevent
* losing events.
*/
if (evt->flags & DWC3_EVENT_PENDING)
return IRQ_HANDLED;
count = dwc3_readl(dwc->regs, DWC3_GEVNTCOUNT(0));
count &= DWC3_GEVNTCOUNT_MASK;
if (!count)

10
drivers/usb/gadget/function/f_fs.c
Просмотреть файл

@ -1858,12 +1858,12 @@ static int ffs_func_eps_enable(struct ffs_function *func)
ep->ep->driver_data = ep;
ep->ep->desc = ds;
comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
USB_DT_ENDPOINT_SIZE);
ep->ep->maxburst = comp_desc->bMaxBurst + 1;
if (needs_comp_desc)
if (needs_comp_desc) {
comp_desc = (struct usb_ss_ep_comp_descriptor *)(ds +
USB_DT_ENDPOINT_SIZE);
ep->ep->maxburst = comp_desc->bMaxBurst + 1;
ep->ep->comp_desc = comp_desc;
}
ret = usb_ep_enable(ep->ep);
if (likely(!ret)) {

2
drivers/usb/gadget/function/u_serial.c
Просмотреть файл

@ -1256,7 +1256,7 @@ static void gserial_console_exit(void)
struct gscons_info *info = &gscons_info;
unregister_console(&gserial_cons);
if (info->console_thread != NULL)
if (!IS_ERR_OR_NULL(info->console_thread))
kthread_stop(info->console_thread);
gs_buf_free(&info->con_buf);
}

6
drivers/usb/gadget/udc/dummy_hcd.c
Просмотреть файл

@ -2008,7 +2008,7 @@ ss_hub_descriptor(struct usb_hub_descriptor *desc)
HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = 1;
desc->u.ss.bHubHdrDecLat = 0x04; /* Worst case: 0.4 micro sec*/
desc->u.ss.DeviceRemovable = 0xffff;
desc->u.ss.DeviceRemovable = 0;
}
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
@ -2020,8 +2020,8 @@ static inline void hub_descriptor(struct usb_hub_descriptor *desc)
HUB_CHAR_INDV_PORT_LPSM |
HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = 1;
desc->u.hs.DeviceRemovable[0] = 0xff;
desc->u.hs.DeviceRemovable[1] = 0xff;
desc->u.hs.DeviceRemovable[0] = 0;
desc->u.hs.DeviceRemovable[1] = 0xff; /* PortPwrCtrlMask */
}
static int dummy_hub_control(

4
drivers/usb/host/ehci-platform.c
Просмотреть файл

@ -384,8 +384,10 @@ static int ehci_platform_resume(struct device *dev)
}
companion_dev = usb_of_get_companion_dev(hcd->self.controller);
if (companion_dev)
if (companion_dev) {
device_pm_wait_for_dev(hcd->self.controller, companion_dev);
put_device(companion_dev);
}
ehci_resume(hcd, priv->reset_on_resume);
return 0;

6
drivers/usb/host/r8a66597-hcd.c
Просмотреть файл

@ -1269,7 +1269,7 @@ static void set_td_timer(struct r8a66597 *r8a66597, struct r8a66597_td *td)
time = 30;
break;
default:
time = 300;
time = 50;
break;
}
@ -1785,6 +1785,7 @@ static void r8a66597_td_timer(unsigned long _r8a66597)
pipe = td->pipe;
pipe_stop(r8a66597, pipe);
/* Select a different address or endpoint */
new_td = td;
do {
list_move_tail(&new_td->queue,
@ -1794,7 +1795,8 @@ static void r8a66597_td_timer(unsigned long _r8a66597)
new_td = td;
break;
}
} while (td != new_td && td->address == new_td->address);
} while (td != new_td && td->address == new_td->address &&
td->pipe->info.epnum == new_td->pipe->info.epnum);
start_transfer(r8a66597, new_td);

2
drivers/usb/host/xhci-hub.c
Просмотреть файл

@ -419,7 +419,7 @@ static int xhci_stop_device(struct xhci_hcd *xhci, int slot_id, int suspend)
wait_for_completion(cmd->completion);
if (cmd->status == COMP_COMMAND_ABORTED ||
cmd->status == COMP_STOPPED) {
cmd->status == COMP_COMMAND_RING_STOPPED) {
xhci_warn(xhci, "Timeout while waiting for stop endpoint command\n");
ret = -ETIME;
}

11
drivers/usb/host/xhci-mem.c
Просмотреть файл

@ -56,7 +56,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
}
if (max_packet) {
seg->bounce_buf = kzalloc(max_packet, flags | GFP_DMA);
seg->bounce_buf = kzalloc(max_packet, flags);
if (!seg->bounce_buf) {
dma_pool_free(xhci->segment_pool, seg->trbs, dma);
kfree(seg);
@ -1724,7 +1724,7 @@ static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
xhci->dcbaa->dev_context_ptrs[0] = cpu_to_le64(xhci->scratchpad->sp_dma);
for (i = 0; i < num_sp; i++) {
dma_addr_t dma;
void *buf = dma_alloc_coherent(dev, xhci->page_size, &dma,
void *buf = dma_zalloc_coherent(dev, xhci->page_size, &dma,
flags);
if (!buf)
goto fail_sp4;
@ -2307,10 +2307,11 @@ static int xhci_setup_port_arrays(struct xhci_hcd *xhci, gfp_t flags)
/* Place limits on the number of roothub ports so that the hub
* descriptors aren't longer than the USB core will allocate.
*/
if (xhci->num_usb3_ports > 15) {
if (xhci->num_usb3_ports > USB_SS_MAXPORTS) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,
"Limiting USB 3.0 roothub ports to 15.");
xhci->num_usb3_ports = 15;
"Limiting USB 3.0 roothub ports to %u.",
USB_SS_MAXPORTS);
xhci->num_usb3_ports = USB_SS_MAXPORTS;
}
if (xhci->num_usb2_ports > USB_MAXCHILDREN) {
xhci_dbg_trace(xhci, trace_xhci_dbg_init,

7
drivers/usb/host/xhci-pci.c
Просмотреть файл

@ -52,6 +52,7 @@
#define PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI 0x0aa8
#define PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI 0x1aa8
#define PCI_DEVICE_ID_INTEL_APL_XHCI 0x5aa8
#define PCI_DEVICE_ID_INTEL_DNV_XHCI 0x19d0
static const char hcd_name[] = "xhci_hcd";
@ -166,7 +167,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_M_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_BROXTON_B_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI)) {
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI)) {
xhci->quirks |= XHCI_PME_STUCK_QUIRK;
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
@ -175,7 +177,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
}
if (pdev->vendor == PCI_VENDOR_ID_INTEL &&
(pdev->device == PCI_DEVICE_ID_INTEL_CHERRYVIEW_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI))
pdev->device == PCI_DEVICE_ID_INTEL_APL_XHCI ||
pdev->device == PCI_DEVICE_ID_INTEL_DNV_XHCI))
xhci->quirks |= XHCI_MISSING_CAS;
if (pdev->vendor == PCI_VENDOR_ID_ETRON &&

2
drivers/usb/host/xhci-plat.c
Просмотреть файл

@ -177,7 +177,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
irq = platform_get_irq(pdev, 0);
if (irq < 0)
return -ENODEV;
return irq;
/*
* sysdev must point to a device that is known to the system firmware

20
drivers/usb/host/xhci-ring.c
Просмотреть файл

@ -323,7 +323,7 @@ static void xhci_handle_stopped_cmd_ring(struct xhci_hcd *xhci,
if (i_cmd->status != COMP_COMMAND_ABORTED)
continue;
i_cmd->status = COMP_STOPPED;
i_cmd->status = COMP_COMMAND_RING_STOPPED;
xhci_dbg(xhci, "Turn aborted command %p to no-op\n",
i_cmd->command_trb);
@ -641,8 +641,8 @@ static void xhci_giveback_urb_in_irq(struct xhci_hcd *xhci,
xhci_urb_free_priv(urb_priv);
usb_hcd_unlink_urb_from_ep(hcd, urb);
spin_unlock(&xhci->lock);
usb_hcd_giveback_urb(hcd, urb, status);
trace_xhci_urb_giveback(urb);
usb_hcd_giveback_urb(hcd, urb, status);
spin_lock(&xhci->lock);
}
@ -1380,7 +1380,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
cmd_comp_code = GET_COMP_CODE(le32_to_cpu(event->status));
/* If CMD ring stopped we own the trbs between enqueue and dequeue */
if (cmd_comp_code == COMP_STOPPED) {
if (cmd_comp_code == COMP_COMMAND_RING_STOPPED) {
complete_all(&xhci->cmd_ring_stop_completion);
return;
}
@ -1436,8 +1436,8 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
break;
case TRB_CMD_NOOP:
/* Is this an aborted command turned to NO-OP? */
if (cmd->status == COMP_STOPPED)
cmd_comp_code = COMP_STOPPED;
if (cmd->status == COMP_COMMAND_RING_STOPPED)
cmd_comp_code = COMP_COMMAND_RING_STOPPED;
break;
case TRB_RESET_EP:
WARN_ON(slot_id != TRB_TO_SLOT_ID(
@ -2677,11 +2677,12 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
struct xhci_hcd *xhci = hcd_to_xhci(hcd);
union xhci_trb *event_ring_deq;
irqreturn_t ret = IRQ_NONE;
unsigned long flags;
dma_addr_t deq;
u64 temp_64;
u32 status;
spin_lock(&xhci->lock);
spin_lock_irqsave(&xhci->lock, flags);
/* Check if the xHC generated the interrupt, or the irq is shared */
status = readl(&xhci->op_regs->status);
if (status == ~(u32)0) {
@ -2707,12 +2708,9 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
*/
status |= STS_EINT;
writel(status, &xhci->op_regs->status);
/* FIXME when MSI-X is supported and there are multiple vectors */
/* Clear the MSI-X event interrupt status */
if (hcd->irq) {
if (!hcd->msi_enabled) {
u32 irq_pending;
/* Acknowledge the PCI interrupt */
irq_pending = readl(&xhci->ir_set->irq_pending);
irq_pending |= IMAN_IP;
writel(irq_pending, &xhci->ir_set->irq_pending);
@ -2757,7 +2755,7 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
ret = IRQ_HANDLED;
out:
spin_unlock(&xhci->lock);
spin_unlock_irqrestore(&xhci->lock, flags);
return ret;
}

13
drivers/usb/host/xhci.c
Просмотреть файл

@ -359,9 +359,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd)
/* fall back to msi*/
ret = xhci_setup_msi(xhci);
if (!ret)
/* hcd->irq is 0, we have MSI */
if (!ret) {
hcd->msi_enabled = 1;
return 0;
}
if (!pdev->irq) {
xhci_err(xhci, "No msi-x/msi found and no IRQ in BIOS\n");
@ -1763,7 +1764,7 @@ static int xhci_configure_endpoint_result(struct xhci_hcd *xhci,
switch (*cmd_status) {
case COMP_COMMAND_ABORTED:
case COMP_STOPPED:
case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for configure endpoint command\n");
ret = -ETIME;
break;
@ -1813,7 +1814,7 @@ static int xhci_evaluate_context_result(struct xhci_hcd *xhci,
switch (*cmd_status) {
case COMP_COMMAND_ABORTED:
case COMP_STOPPED:
case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for evaluate context command\n");
ret = -ETIME;
break;
@ -3432,7 +3433,7 @@ static int xhci_discover_or_reset_device(struct usb_hcd *hcd,
ret = reset_device_cmd->status;
switch (ret) {
case COMP_COMMAND_ABORTED:
case COMP_STOPPED:
case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout waiting for reset device command\n");
ret = -ETIME;
goto command_cleanup;
@ -3817,7 +3818,7 @@ static int xhci_setup_device(struct usb_hcd *hcd, struct usb_device *udev,
*/
switch (command->status) {
case COMP_COMMAND_ABORTED:
case COMP_STOPPED:
case COMP_COMMAND_RING_STOPPED:
xhci_warn(xhci, "Timeout while waiting for setup device command\n");
ret = -ETIME;
break;

2
drivers/usb/misc/chaoskey.c
Просмотреть файл

@ -192,7 +192,7 @@ static int chaoskey_probe(struct usb_interface *interface,
dev->in_ep = in_ep;
if (udev->descriptor.idVendor != ALEA_VENDOR_ID)
if (le16_to_cpu(udev->descriptor.idVendor) != ALEA_VENDOR_ID)
dev->reads_started = 1;
dev->size = size;

2
drivers/usb/misc/iowarrior.c
Просмотреть файл

@ -554,7 +554,7 @@ static long iowarrior_ioctl(struct file *file, unsigned int cmd,
info.revision = le16_to_cpu(dev->udev->descriptor.bcdDevice);
/* 0==UNKNOWN, 1==LOW(usb1.1) ,2=FULL(usb1.1), 3=HIGH(usb2.0) */
info.speed = le16_to_cpu(dev->udev->speed);
info.speed = dev->udev->speed;
info.if_num = dev->interface->cur_altsetting->desc.bInterfaceNumber;
info.report_size = dev->report_size;

1
drivers/usb/misc/legousbtower.c
Просмотреть файл

@ -926,6 +926,7 @@ static int tower_probe (struct usb_interface *interface, const struct usb_device
USB_MAJOR, dev->minor);
exit:
kfree(get_version_reply);
return retval;
error:

2
drivers/usb/misc/sisusbvga/sisusb_con.c
Просмотреть файл

@ -973,7 +973,7 @@ sisusbcon_set_origin(struct vc_data *c)
mutex_unlock(&sisusb->lock);
return 1;
return true;
}
/* Interface routine */

9
drivers/usb/musb/musb_host.c
Просмотреть файл

@ -2780,10 +2780,11 @@ int musb_host_setup(struct musb *musb, int power_budget)
int ret;
struct usb_hcd *hcd = musb->hcd;
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
if (musb->port_mode == MUSB_PORT_MODE_HOST) {
MUSB_HST_MODE(musb);
musb->xceiv->otg->default_a = 1;
musb->xceiv->otg->state = OTG_STATE_A_IDLE;
}
otg_set_host(musb->xceiv->otg, &hcd->self);
hcd->self.otg_port = 1;
musb->xceiv->otg->host = &hcd->self;

13
drivers/usb/musb/tusb6010_omap.c
Просмотреть файл

@ -219,6 +219,7 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
u32 dma_remaining;
int src_burst, dst_burst;
u16 csr;
u32 psize;
int ch;
s8 dmareq;
s8 sync_dev;
@ -390,15 +391,19 @@ static int tusb_omap_dma_program(struct dma_channel *channel, u16 packet_sz,
if (chdat->tx) {
/* Send transfer_packet_sz packets at a time */
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
chdat->transfer_packet_sz);
psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
psize &= ~0x7ff;
psize |= chdat->transfer_packet_sz;
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_TX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));
} else {
/* Receive transfer_packet_sz packets at a time */
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET,
chdat->transfer_packet_sz << 16);
psize = musb_readl(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET);
psize &= ~(0x7ff << 16);
psize |= (chdat->transfer_packet_sz << 16);
musb_writel(ep_conf, TUSB_EP_MAX_PACKET_SIZE_OFFSET, psize);
musb_writel(ep_conf, TUSB_EP_RX_OFFSET,
TUSB_EP_CONFIG_XFR_SIZE(chdat->transfer_len));

10
drivers/usb/serial/ftdi_sio.c
Просмотреть файл

@ -809,10 +809,10 @@ static const struct usb_device_id id_table_combined[] = {
{ USB_DEVICE(FTDI_VID, FTDI_PROPOX_ISPCABLEIII_PID) },
{ USB_DEVICE(FTDI_VID, CYBER_CORTEX_AV_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_OCD_H_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_PID, 1) },
{ USB_DEVICE_INTERFACE_NUMBER(OLIMEX_VID, OLIMEX_ARM_USB_TINY_H_PID, 1) },
{ USB_DEVICE(FIC_VID, FIC_NEO1973_DEBUG_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(FTDI_VID, FTDI_OOCDLINK_PID),
@ -1527,9 +1527,9 @@ static int set_serial_info(struct tty_struct *tty,
(new_serial.flags & ASYNC_FLAGS));
priv->custom_divisor = new_serial.custom_divisor;
check_and_exit:
write_latency_timer(port);
check_and_exit:
if ((old_priv.flags & ASYNC_SPD_MASK) !=
(priv->flags & ASYNC_SPD_MASK)) {
if ((priv->flags & ASYNC_SPD_MASK) == ASYNC_SPD_HI)

2
drivers/usb/serial/ftdi_sio_ids.h
Просмотреть файл

@ -882,6 +882,8 @@
/* Olimex */
#define OLIMEX_VID 0x15BA
#define OLIMEX_ARM_USB_OCD_PID 0x0003
#define OLIMEX_ARM_USB_TINY_PID 0x0004
#define OLIMEX_ARM_USB_TINY_H_PID 0x002a
#define OLIMEX_ARM_USB_OCD_H_PID 0x002b
/*

5
drivers/usb/serial/io_ti.c
Просмотреть файл

@ -2336,8 +2336,11 @@ static void change_port_settings(struct tty_struct *tty,
if (!baud) {
/* pick a default, any default... */
baud = 9600;
} else
} else {
/* Avoid a zero divisor. */
baud = min(baud, 461550);
tty_encode_baud_rate(tty, baud, baud);
}
edge_port->baud_rate = baud;
config->wBaudRate = (__u16)((461550L + baud/2) / baud);

21
drivers/usb/serial/ir-usb.c
Просмотреть файл

@ -197,6 +197,7 @@ static u8 ir_xbof_change(u8 xbof)
static int ir_startup(struct usb_serial *serial)
{
struct usb_irda_cs_descriptor *irda_desc;
int rates;
irda_desc = irda_usb_find_class_desc(serial, 0);
if (!irda_desc) {
@ -205,18 +206,20 @@ static int ir_startup(struct usb_serial *serial)
return -ENODEV;
}
rates = le16_to_cpu(irda_desc->wBaudRate);
dev_dbg(&serial->dev->dev,
"%s - Baud rates supported:%s%s%s%s%s%s%s%s%s\n",
__func__,
(irda_desc->wBaudRate & USB_IRDA_BR_2400) ? " 2400" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_9600) ? " 9600" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_19200) ? " 19200" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_38400) ? " 38400" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_57600) ? " 57600" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_115200) ? " 115200" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_576000) ? " 576000" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_1152000) ? " 1152000" : "",
(irda_desc->wBaudRate & USB_IRDA_BR_4000000) ? " 4000000" : "");
(rates & USB_IRDA_BR_2400) ? " 2400" : "",
(rates & USB_IRDA_BR_9600) ? " 9600" : "",
(rates & USB_IRDA_BR_19200) ? " 19200" : "",
(rates & USB_IRDA_BR_38400) ? " 38400" : "",
(rates & USB_IRDA_BR_57600) ? " 57600" : "",
(rates & USB_IRDA_BR_115200) ? " 115200" : "",
(rates & USB_IRDA_BR_576000) ? " 576000" : "",
(rates & USB_IRDA_BR_1152000) ? " 1152000" : "",
(rates & USB_IRDA_BR_4000000) ? " 4000000" : "");
switch (irda_desc->bmAdditionalBOFs) {
case USB_IRDA_AB_48:

2
drivers/usb/serial/mct_u232.c
Просмотреть файл

@ -189,7 +189,7 @@ static int mct_u232_set_baud_rate(struct tty_struct *tty,
return -ENOMEM;
divisor = mct_u232_calculate_baud_rate(serial, value, &speed);
put_unaligned_le32(cpu_to_le32(divisor), buf);
put_unaligned_le32(divisor, buf);
rc = usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
MCT_U232_SET_BAUD_RATE_REQUEST,
MCT_U232_SET_REQUEST_TYPE,

8
drivers/usb/serial/option.c
Просмотреть файл

@ -281,6 +281,7 @@ static void option_instat_callback(struct urb *urb);
#define TELIT_PRODUCT_LE922_USBCFG0 0x1042
#define TELIT_PRODUCT_LE922_USBCFG3 0x1043
#define TELIT_PRODUCT_LE922_USBCFG5 0x1045
#define TELIT_PRODUCT_ME910 0x1100
#define TELIT_PRODUCT_LE920 0x1200
#define TELIT_PRODUCT_LE910 0x1201
#define TELIT_PRODUCT_LE910_USBCFG4 0x1206
@ -640,6 +641,11 @@ static const struct option_blacklist_info simcom_sim7100e_blacklist = {
.reserved = BIT(5) | BIT(6),
};
static const struct option_blacklist_info telit_me910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(3),
};
static const struct option_blacklist_info telit_le910_blacklist = {
.sendsetup = BIT(0),
.reserved = BIT(1) | BIT(2),
@ -1235,6 +1241,8 @@ static const struct usb_device_id option_ids[] = {
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg3 },
{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, TELIT_PRODUCT_LE922_USBCFG5, 0xff),
.driver_info = (kernel_ulong_t)&telit_le922_blacklist_usbcfg0 },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_ME910),
.driver_info = (kernel_ulong_t)&telit_me910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
.driver_info = (kernel_ulong_t)&telit_le910_blacklist },
{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

2
drivers/usb/serial/qcserial.c
Просмотреть файл

@ -162,6 +162,8 @@ static const struct usb_device_id id_table[] = {
{DEVICE_SWI(0x1199, 0x9071)}, /* Sierra Wireless MC74xx */
{DEVICE_SWI(0x1199, 0x9078)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x9079)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x1199, 0x907a)}, /* Sierra Wireless EM74xx QDL */
{DEVICE_SWI(0x1199, 0x907b)}, /* Sierra Wireless EM74xx */
{DEVICE_SWI(0x413c, 0x81a2)}, /* Dell Wireless 5806 Gobi(TM) 4G LTE Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a3)}, /* Dell Wireless 5570 HSPA+ (42Mbps) Mobile Broadband Card */
{DEVICE_SWI(0x413c, 0x81a4)}, /* Dell Wireless 5570e HSPA+ (42Mbps) Mobile Broadband Card */

90
drivers/usb/storage/ene_ub6250.c
Просмотреть файл

@ -446,6 +446,10 @@ struct ms_lib_ctrl {
#define SD_BLOCK_LEN 9
struct ene_ub6250_info {
/* I/O bounce buffer */
u8 *bbuf;
/* for 6250 code */
struct SD_STATUS SD_Status;
struct MS_STATUS MS_Status;
@ -493,8 +497,11 @@ static int ene_load_bincode(struct us_data *us, unsigned char flag);
static void ene_ub6250_info_destructor(void *extra)
{
struct ene_ub6250_info *info = (struct ene_ub6250_info *) extra;
if (!extra)
return;
kfree(info->bbuf);
}
static int ene_send_scsi_cmd(struct us_data *us, u8 fDir, void *buf, int use_sg)
@ -860,8 +867,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
u8 PageNum, u32 *PageBuf, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
int result;
u8 ExtBuf[4];
u32 bn = PhyBlockAddr * 0x20 + PageNum;
result = ene_load_bincode(us, MS_RW_PATTERN);
@ -901,7 +909,7 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
bcb->CDB[2] = (unsigned char)(PhyBlockAddr>>16);
bcb->CDB[6] = 0x01;
result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@ -910,9 +918,9 @@ static int ms_read_readpage(struct us_data *us, u32 PhyBlockAddr,
ExtraDat->status0 = 0x10; /* Not yet,fireware support */
ExtraDat->status1 = 0x00; /* Not yet,fireware support */
ExtraDat->ovrflg = ExtBuf[0];
ExtraDat->mngflg = ExtBuf[1];
ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
ExtraDat->ovrflg = bbuf[0];
ExtraDat->mngflg = bbuf[1];
ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@ -1332,8 +1340,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
u8 PageNum, struct ms_lib_type_extdat *ExtraDat)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
int result;
u8 ExtBuf[4];
memset(bcb, 0, sizeof(struct bulk_cb_wrap));
bcb->Signature = cpu_to_le32(US_BULK_CB_SIGN);
@ -1347,7 +1356,7 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
bcb->CDB[2] = (unsigned char)(PhyBlock>>16);
bcb->CDB[6] = 0x01;
result = ene_send_scsi_cmd(us, FDIR_READ, &ExtBuf, 0);
result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
@ -1355,9 +1364,9 @@ static int ms_lib_read_extra(struct us_data *us, u32 PhyBlock,
ExtraDat->intr = 0x80; /* Not yet, waiting for fireware support */
ExtraDat->status0 = 0x10; /* Not yet, waiting for fireware support */
ExtraDat->status1 = 0x00; /* Not yet, waiting for fireware support */
ExtraDat->ovrflg = ExtBuf[0];
ExtraDat->mngflg = ExtBuf[1];
ExtraDat->logadr = memstick_logaddr(ExtBuf[2], ExtBuf[3]);
ExtraDat->ovrflg = bbuf[0];
ExtraDat->mngflg = bbuf[1];
ExtraDat->logadr = memstick_logaddr(bbuf[2], bbuf[3]);
return USB_STOR_TRANSPORT_GOOD;
}
@ -1556,9 +1565,9 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st)
u16 PhyBlock, newblk, i;
u16 LogStart, LogEnde;
struct ms_lib_type_extdat extdat;
u8 buf[0x200];
u32 count = 0, index = 0;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
for (PhyBlock = 0; PhyBlock < info->MS_Lib.NumberOfPhyBlock;) {
ms_lib_phy_to_log_range(PhyBlock, &LogStart, &LogEnde);
@ -1572,14 +1581,16 @@ static int ms_lib_scan_logicalblocknumber(struct us_data *us, u16 btBlk1st)
}
if (count == PhyBlock) {
ms_lib_read_extrablock(us, PhyBlock, 0, 0x80, &buf);
ms_lib_read_extrablock(us, PhyBlock, 0, 0x80,
bbuf);
count += 0x80;
}
index = (PhyBlock % 0x80) * 4;
extdat.ovrflg = buf[index];
extdat.mngflg = buf[index+1];
extdat.logadr = memstick_logaddr(buf[index+2], buf[index+3]);
extdat.ovrflg = bbuf[index];
extdat.mngflg = bbuf[index+1];
extdat.logadr = memstick_logaddr(bbuf[index+2],
bbuf[index+3]);
if ((extdat.ovrflg & MS_REG_OVR_BKST) != MS_REG_OVR_BKST_OK) {
ms_lib_setacquired_errorblock(us, PhyBlock);
@ -2062,9 +2073,9 @@ static int ene_ms_init(struct us_data *us)
{
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
int result;
u8 buf[0x200];
u16 MSP_BlockSize, MSP_UserAreaBlocks;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
printk(KERN_INFO "transport --- ENE_MSInit\n");
@ -2083,13 +2094,13 @@ static int ene_ms_init(struct us_data *us)
bcb->CDB[0] = 0xF1;
bcb->CDB[1] = 0x01;
result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
printk(KERN_ERR "Execution MS Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
/* the same part to test ENE */
info->MS_Status = *(struct MS_STATUS *)&buf[0];
info->MS_Status = *(struct MS_STATUS *) bbuf;
if (info->MS_Status.Insert && info->MS_Status.Ready) {
printk(KERN_INFO "Insert = %x\n", info->MS_Status.Insert);
@ -2098,15 +2109,15 @@ static int ene_ms_init(struct us_data *us)
printk(KERN_INFO "IsMSPHG = %x\n", info->MS_Status.IsMSPHG);
printk(KERN_INFO "WtP= %x\n", info->MS_Status.WtP);
if (info->MS_Status.IsMSPro) {
MSP_BlockSize = (buf[6] << 8) | buf[7];
MSP_UserAreaBlocks = (buf[10] << 8) | buf[11];
MSP_BlockSize = (bbuf[6] << 8) | bbuf[7];
MSP_UserAreaBlocks = (bbuf[10] << 8) | bbuf[11];
info->MSP_TotalBlock = MSP_BlockSize * MSP_UserAreaBlocks;
} else {
ms_card_init(us); /* Card is MS (to ms.c)*/
}
usb_stor_dbg(us, "MS Init Code OK !!\n");
} else {
usb_stor_dbg(us, "MS Card Not Ready --- %x\n", buf[0]);
usb_stor_dbg(us, "MS Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
@ -2116,9 +2127,9 @@ static int ene_ms_init(struct us_data *us)
static int ene_sd_init(struct us_data *us)
{
int result;
u8 buf[0x200];
struct bulk_cb_wrap *bcb = (struct bulk_cb_wrap *) us->iobuf;
struct ene_ub6250_info *info = (struct ene_ub6250_info *) us->extra;
u8 *bbuf = info->bbuf;
usb_stor_dbg(us, "transport --- ENE_SDInit\n");
/* SD Init Part-1 */
@ -2152,17 +2163,17 @@ static int ene_sd_init(struct us_data *us)
bcb->Flags = US_BULK_FLAG_IN;
bcb->CDB[0] = 0xF1;
result = ene_send_scsi_cmd(us, FDIR_READ, &buf, 0);
result = ene_send_scsi_cmd(us, FDIR_READ, bbuf, 0);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_dbg(us, "Execution SD Init Code Fail !!\n");
return USB_STOR_TRANSPORT_ERROR;
}
info->SD_Status = *(struct SD_STATUS *)&buf[0];
info->SD_Status = *(struct SD_STATUS *) bbuf;
if (info->SD_Status.Insert && info->SD_Status.Ready) {
struct SD_STATUS *s = &info->SD_Status;
ene_get_card_status(us, (unsigned char *)&buf);
ene_get_card_status(us, bbuf);
usb_stor_dbg(us, "Insert = %x\n", s->Insert);
usb_stor_dbg(us, "Ready = %x\n", s->Ready);
usb_stor_dbg(us, "IsMMC = %x\n", s->IsMMC);
@ -2170,7 +2181,7 @@ static int ene_sd_init(struct us_data *us)
usb_stor_dbg(us, "HiSpeed = %x\n", s->HiSpeed);
usb_stor_dbg(us, "WtP = %x\n", s->WtP);
} else {
usb_stor_dbg(us, "SD Card Not Ready --- %x\n", buf[0]);
usb_stor_dbg(us, "SD Card Not Ready --- %x\n", bbuf[0]);
return USB_STOR_TRANSPORT_ERROR;
}
return USB_STOR_TRANSPORT_GOOD;
@ -2180,13 +2191,15 @@ static int ene_sd_init(struct us_data *us)
static int ene_init(struct us_data *us)
{
int result;
u8 misc_reg03 = 0;
u8 misc_reg03;
struct ene_ub6250_info *info = (struct ene_ub6250_info *)(us->extra);
u8 *bbuf = info->bbuf;
result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
result = ene_get_card_type(us, REG_CARD_STATUS, bbuf);
if (result != USB_STOR_XFER_GOOD)
return USB_STOR_TRANSPORT_ERROR;
misc_reg03 = bbuf[0];
if (misc_reg03 & 0x01) {
if (!info->SD_Status.Ready) {
result = ene_sd_init(us);
@ -2303,8 +2316,9 @@ static int ene_ub6250_probe(struct usb_interface *intf,
const struct usb_device_id *id)
{
int result;
u8 misc_reg03 = 0;
u8 misc_reg03;
struct us_data *us;
struct ene_ub6250_info *info;
result = usb_stor_probe1(&us, intf, id,
(id - ene_ub6250_usb_ids) + ene_ub6250_unusual_dev_list,
@ -2313,11 +2327,16 @@ static int ene_ub6250_probe(struct usb_interface *intf,
return result;
/* FIXME: where should the code alloc extra buf ? */
if (!us->extra) {
us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
if (!us->extra)
return -ENOMEM;
us->extra_destructor = ene_ub6250_info_destructor;
us->extra = kzalloc(sizeof(struct ene_ub6250_info), GFP_KERNEL);
if (!us->extra)
return -ENOMEM;
us->extra_destructor = ene_ub6250_info_destructor;
info = (struct ene_ub6250_info *)(us->extra);
info->bbuf = kmalloc(512, GFP_KERNEL);
if (!info->bbuf) {
kfree(us->extra);
return -ENOMEM;
}
us->transport_name = "ene_ub6250";
@ -2329,12 +2348,13 @@ static int ene_ub6250_probe(struct usb_interface *intf,
return result;
/* probe card type */
result = ene_get_card_type(us, REG_CARD_STATUS, &misc_reg03);
result = ene_get_card_type(us, REG_CARD_STATUS, info->bbuf);
if (result != USB_STOR_XFER_GOOD) {
usb_stor_disconnect(intf);
return USB_STOR_TRANSPORT_ERROR;
}
misc_reg03 = info->bbuf[0];
if (!(misc_reg03 & 0x01)) {
pr_info("ums_eneub6250: This driver only supports SD/MS cards. "
"It does not support SM cards.\n");

11
drivers/usb/usbip/vhci_hcd.c
Просмотреть файл

@ -235,14 +235,19 @@ done:
static inline void hub_descriptor(struct usb_hub_descriptor *desc)
{
int width;
memset(desc, 0, sizeof(*desc));
desc->bDescriptorType = USB_DT_HUB;
desc->bDescLength = 9;
desc->wHubCharacteristics = cpu_to_le16(
HUB_CHAR_INDV_PORT_LPSM | HUB_CHAR_COMMON_OCPM);
desc->bNbrPorts = VHCI_HC_PORTS;
desc->u.hs.DeviceRemovable[0] = 0xff;
desc->u.hs.DeviceRemovable[1] = 0xff;
BUILD_BUG_ON(VHCI_HC_PORTS > USB_MAXCHILDREN);
width = desc->bNbrPorts / 8 + 1;
desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * width;
memset(&desc->u.hs.DeviceRemovable[0], 0, width);
memset(&desc->u.hs.DeviceRemovable[width], 0xff, width);
}
static int vhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,

5
drivers/uwb/i1480/dfu/usb.c
Просмотреть файл

@ -341,6 +341,7 @@ error_submit_ep1:
static
int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
{
struct usb_device *udev = interface_to_usbdev(iface);
struct i1480_usb *i1480_usb;
struct i1480 *i1480;
struct device *dev = &iface->dev;
@ -352,8 +353,8 @@ int i1480_usb_probe(struct usb_interface *iface, const struct usb_device_id *id)
iface->cur_altsetting->desc.bInterfaceNumber);
goto error;
}
if (iface->num_altsetting > 1
&& interface_to_usbdev(iface)->descriptor.idProduct == 0xbabe) {
if (iface->num_altsetting > 1 &&
le16_to_cpu(udev->descriptor.idProduct) == 0xbabe) {
/* Need altsetting #1 [HW QUIRK] or EP1 won't work */
result = usb_set_interface(interface_to_usbdev(iface), 0, 1);
if (result < 0)

1
include/linux/usb/hcd.h
Просмотреть файл

@ -148,6 +148,7 @@ struct usb_hcd {
unsigned rh_registered:1;/* is root hub registered? */
unsigned rh_pollable:1; /* may we poll the root hub? */
unsigned msix_enabled:1; /* driver has MSI-X enabled? */
unsigned msi_enabled:1; /* driver has MSI enabled? */
unsigned remove_phy:1; /* auto-remove USB phy */
/* The next flag is a stopgap, to be removed when all the HCDs

3
include/uapi/linux/usb/ch11.h
Просмотреть файл

@ -22,6 +22,9 @@
*/
#define USB_MAXCHILDREN 31
/* See USB 3.1 spec Table 10-5 */
#define USB_SS_MAXPORTS 15
/*
* Hub request types
*/