x86, asm: Fix CFI macro invocations to deal with shortcomings in gas

gas prior to (perhaps) 2.16.90 has problems with passing non-
parenthesized expressions containing spaces to macros. Spaces, however,
get inserted by cpp between any macro expanding to a number and a
subsequent + or -. For the +, current x86 gas then removes the space
again (future gas may not do so), but for the - the space gets retained
and is then considered a separator between macro arguments.

Fix the respective definitions for both the - and + cases, so that they
neither contain spaces nor make cpp insert any (the latter by adding
seemingly redundant parentheses).

Signed-off-by: Jan Beulich <jbeulich@novell.com>
LKML-Reference: <4CBDBEBA020000780001E05A@vpn.id2.novell.com>
Cc: Alexander van Heukelum <heukelum@fastmail.fm>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
This commit is contained in:
Jan Beulich 2010-10-19 14:52:26 +01:00 коммит произвёл H. Peter Anvin
Родитель d0ed0c3266
Коммит 3234282f33
7 изменённых файлов: 56 добавлений и 79 удалений

2
Kbuild
Просмотреть файл

@ -53,7 +53,7 @@ targets += arch/$(SRCARCH)/kernel/asm-offsets.s
# Default sed regexp - multiline due to syntax constraints
define sed-y
"/^->/{s:->#\(.*\):/* \1 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 \2 /* \3 */:; \
s:^->\([^ ]*\) [\$$#]*\([^ ]*\) \(.*\):#define \1 (\2) /* \3 */:; \
s:->::; p;}"
endef

Просмотреть файл

@ -48,36 +48,38 @@ For 32-bit we have the following conventions - kernel is built with
/*
* 64-bit system call stack frame layout defines and helpers,
* for assembly code:
* 64-bit system call stack frame layout defines and helpers, for
* assembly code (note that the seemingly unnecessary parentheses
* are to prevent cpp from inserting spaces in expressions that get
* passed to macros):
*/
#define R15 0
#define R14 8
#define R13 16
#define R12 24
#define RBP 32
#define RBX 40
#define R15 (0)
#define R14 (8)
#define R13 (16)
#define R12 (24)
#define RBP (32)
#define RBX (40)
/* arguments: interrupts/non tracing syscalls only save up to here: */
#define R11 48
#define R10 56
#define R9 64
#define R8 72
#define RAX 80
#define RCX 88
#define RDX 96
#define RSI 104
#define RDI 112
#define ORIG_RAX 120 /* + error_code */
#define R11 (48)
#define R10 (56)
#define R9 (64)
#define R8 (72)
#define RAX (80)
#define RCX (88)
#define RDX (96)
#define RSI (104)
#define RDI (112)
#define ORIG_RAX (120) /* + error_code */
/* end of arguments */
/* cpu exception frame or undefined in case of fast syscall: */
#define RIP 128
#define CS 136
#define EFLAGS 144
#define RSP 152
#define SS 160
#define RIP (128)
#define CS (136)
#define EFLAGS (144)
#define RSP (152)
#define SS (160)
#define ARGOFFSET R11
#define SWFRAME ORIG_RAX
@ -111,7 +113,7 @@ For 32-bit we have the following conventions - kernel is built with
.endif
.endm
#define ARG_SKIP 9*8
#define ARG_SKIP (9*8)
.macro RESTORE_ARGS skiprax=0, addskip=0, skiprcx=0, skipr11=0, \
skipr8910=0, skiprdx=0
@ -169,7 +171,7 @@ For 32-bit we have the following conventions - kernel is built with
.endif
.endm
#define REST_SKIP 6*8
#define REST_SKIP (6*8)
.macro SAVE_REST
subq $REST_SKIP, %rsp

Просмотреть файл

@ -16,22 +16,11 @@ BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR)
BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR)
BUILD_INTERRUPT(reboot_interrupt,REBOOT_VECTOR)
BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt1,INVALIDATE_TLB_VECTOR_START+1,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt2,INVALIDATE_TLB_VECTOR_START+2,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt3,INVALIDATE_TLB_VECTOR_START+3,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt4,INVALIDATE_TLB_VECTOR_START+4,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt5,INVALIDATE_TLB_VECTOR_START+5,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt6,INVALIDATE_TLB_VECTOR_START+6,
smp_invalidate_interrupt)
BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7,
.irpc idx, "01234567"
BUILD_INTERRUPT3(invalidate_interrupt\idx,
(INVALIDATE_TLB_VECTOR_START)+\idx,
smp_invalidate_interrupt)
.endr
#endif
BUILD_INTERRUPT(x86_platform_ipi, X86_PLATFORM_IPI_VECTOR)

Просмотреть файл

@ -73,31 +73,31 @@
#define GDT_ENTRY_DEFAULT_USER_DS 15
#define GDT_ENTRY_KERNEL_BASE 12
#define GDT_ENTRY_KERNEL_BASE (12)
#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE + 0)
#define GDT_ENTRY_KERNEL_CS (GDT_ENTRY_KERNEL_BASE+0)
#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE + 1)
#define GDT_ENTRY_KERNEL_DS (GDT_ENTRY_KERNEL_BASE+1)
#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE + 4)
#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE + 5)
#define GDT_ENTRY_TSS (GDT_ENTRY_KERNEL_BASE+4)
#define GDT_ENTRY_LDT (GDT_ENTRY_KERNEL_BASE+5)
#define GDT_ENTRY_PNPBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 6)
#define GDT_ENTRY_APMBIOS_BASE (GDT_ENTRY_KERNEL_BASE + 11)
#define GDT_ENTRY_PNPBIOS_BASE (GDT_ENTRY_KERNEL_BASE+6)
#define GDT_ENTRY_APMBIOS_BASE (GDT_ENTRY_KERNEL_BASE+11)
#define GDT_ENTRY_ESPFIX_SS (GDT_ENTRY_KERNEL_BASE + 14)
#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS * 8)
#define GDT_ENTRY_ESPFIX_SS (GDT_ENTRY_KERNEL_BASE+14)
#define __ESPFIX_SS (GDT_ENTRY_ESPFIX_SS*8)
#define GDT_ENTRY_PERCPU (GDT_ENTRY_KERNEL_BASE + 15)
#define GDT_ENTRY_PERCPU (GDT_ENTRY_KERNEL_BASE+15)
#ifdef CONFIG_SMP
#define __KERNEL_PERCPU (GDT_ENTRY_PERCPU * 8)
#else
#define __KERNEL_PERCPU 0
#endif
#define GDT_ENTRY_STACK_CANARY (GDT_ENTRY_KERNEL_BASE + 16)
#define GDT_ENTRY_STACK_CANARY (GDT_ENTRY_KERNEL_BASE+16)
#ifdef CONFIG_CC_STACKPROTECTOR
#define __KERNEL_STACK_CANARY (GDT_ENTRY_STACK_CANARY * 8)
#define __KERNEL_STACK_CANARY (GDT_ENTRY_STACK_CANARY*8)
#else
#define __KERNEL_STACK_CANARY 0
#endif
@ -182,10 +182,10 @@
#endif
#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS * 8)
#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS * 8)
#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS* 8 + 3)
#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS* 8 + 3)
#define __KERNEL_CS (GDT_ENTRY_KERNEL_CS*8)
#define __KERNEL_DS (GDT_ENTRY_KERNEL_DS*8)
#define __USER_DS (GDT_ENTRY_DEFAULT_USER_DS*8+3)
#define __USER_CS (GDT_ENTRY_DEFAULT_USER_CS*8+3)
#ifndef CONFIG_PARAVIRT
#define get_kernel_rpl() 0
#endif

Просмотреть файл

@ -99,9 +99,7 @@ void foo(void)
DEFINE(PAGE_SIZE_asm, PAGE_SIZE);
DEFINE(PAGE_SHIFT_asm, PAGE_SHIFT);
DEFINE(PTRS_PER_PTE, PTRS_PER_PTE);
DEFINE(PTRS_PER_PMD, PTRS_PER_PMD);
DEFINE(PTRS_PER_PGD, PTRS_PER_PGD);
DEFINE(THREAD_SIZE_asm, THREAD_SIZE);
OFFSET(crypto_tfm_ctx_offset, crypto_tfm, __crt_ctx);

Просмотреть файл

@ -382,20 +382,20 @@ sysenter_past_esp:
* enough kernel state to call TRACE_IRQS_OFF can be called - but
* we immediately enable interrupts at that point anyway.
*/
pushl_cfi $(__USER_DS)
pushl_cfi $__USER_DS
/*CFI_REL_OFFSET ss, 0*/
pushl_cfi %ebp
CFI_REL_OFFSET esp, 0
pushfl_cfi
orl $X86_EFLAGS_IF, (%esp)
pushl_cfi $(__USER_CS)
pushl_cfi $__USER_CS
/*CFI_REL_OFFSET cs, 0*/
/*
* Push current_thread_info()->sysenter_return to the stack.
* A tiny bit of offset fixup is necessary - 4*4 means the 4 words
* pushed above; +8 corresponds to copy_thread's esp0 setting.
*/
pushl_cfi (TI_sysenter_return-THREAD_SIZE+8+4*4)(%esp)
pushl_cfi TI_sysenter_return-THREAD_SIZE_asm+8+4*4(%esp)
CFI_REL_OFFSET eip, 0
pushl_cfi %eax

Просмотреть файл

@ -963,22 +963,10 @@ apicinterrupt X86_PLATFORM_IPI_VECTOR \
x86_platform_ipi smp_x86_platform_ipi
#ifdef CONFIG_SMP
apicinterrupt INVALIDATE_TLB_VECTOR_START+0 \
invalidate_interrupt0 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+1 \
invalidate_interrupt1 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+2 \
invalidate_interrupt2 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+3 \
invalidate_interrupt3 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+4 \
invalidate_interrupt4 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+5 \
invalidate_interrupt5 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+6 \
invalidate_interrupt6 smp_invalidate_interrupt
apicinterrupt INVALIDATE_TLB_VECTOR_START+7 \
invalidate_interrupt7 smp_invalidate_interrupt
.irpc idx, "01234567"
apicinterrupt (INVALIDATE_TLB_VECTOR_START)+\idx \
invalidate_interrupt\idx smp_invalidate_interrupt
.endr
#endif
apicinterrupt THRESHOLD_APIC_VECTOR \