microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

staging: fix comedi NI labpc driver build when ISA_DMA_API is not enabled 

Fix ni_labpc.c to build when CONFIG_ISA_DMA_API is not enabled.

This is a driver that supports both ISA and PCI devices.
It now builds when for PCI-only support or for both
ISA and PCI device support.
(It does not support ISA-only without PCI.)

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Frank Mori Hess <fmhess@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
This commit is contained in:
Randy Dunlap 2011-07-02 11:44:36 -07:00 коммит произвёл Greg Kroah-Hartman
Родитель 819cbb120e
Коммит 3297d6c7c8
1 изменённых файлов: 33 добавлений и 3 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

36
drivers/staging/comedi/drivers/ni_labpc.c
Просмотреть файл

@ -213,8 +213,10 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it);
static int labpc_cancel(struct comedi_device *dev, struct comedi_subdevice *s);
static irqreturn_t labpc_interrupt(int irq, void *d);
static int labpc_drain_fifo(struct comedi_device *dev);
#ifdef CONFIG_ISA_DMA_API
static void labpc_drain_dma(struct comedi_device *dev);
static void handle_isa_dma(struct comedi_device *dev);
#endif
static void labpc_drain_dregs(struct comedi_device *dev);
static int labpc_ai_cmdtest(struct comedi_device *dev,
struct comedi_subdevice *s, struct comedi_cmd *cmd);
@ -238,9 +240,9 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
struct comedi_subdevice *s,
struct comedi_insn *insn,
unsigned int *data);
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd);
#ifdef CONFIG_COMEDI_PCI
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd);
static int labpc_find_device(struct comedi_device *dev, int bus, int slot);
#endif
static int labpc_dio_mem_callback(int dir, int port, int data,
@ -527,7 +529,10 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
{
struct comedi_subdevice *s;
int i;
unsigned long dma_flags, isr_flags;
unsigned long isr_flags;
#ifdef CONFIG_ISA_DMA_API
unsigned long dma_flags;
#endif
short lsb, msb;
printk(KERN_ERR "comedi%d: ni_labpc: %s, io 0x%lx", dev->minor,
@ -587,6 +592,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
}
dev->irq = irq;
#ifdef CONFIG_ISA_DMA_API
/* grab dma channel */
if (dma_chan > 3) {
printk(KERN_ERR " invalid dma channel %u\n", dma_chan);
@ -610,6 +616,7 @@ int labpc_common_attach(struct comedi_device *dev, unsigned long iobase,
set_dma_mode(devpriv->dma_chan, DMA_MODE_READ);
release_dma_lock(dma_flags);
}
#endif
dev->board_name = thisboard->name;
@ -724,9 +731,15 @@ static int labpc_attach(struct comedi_device *dev, struct comedi_devconfig *it)
/* get base address, irq etc. based on bustype */
switch (thisboard->bustype) {
case isa_bustype:
#ifdef CONFIG_ISA_DMA_API
iobase = it->options[0];
irq = it->options[1];
dma_chan = it->options[2];
#else
printk(KERN_ERR " this driver has not been built with ISA DMA "
"support.\n");
return -EINVAL;
#endif
break;
case pci_bustype:
#ifdef CONFIG_COMEDI_PCI
@ -797,10 +810,12 @@ int labpc_common_detach(struct comedi_device *dev)
if (dev->subdevices)
subdev_8255_cleanup(dev, dev->subdevices + 2);
#ifdef CONFIG_ISA_DMA_API
/* only free stuff if it has been allocated by _attach */
kfree(devpriv->dma_buffer);
if (devpriv->dma_chan)
free_dma(devpriv->dma_chan);
#endif
if (dev->irq)
free_irq(dev->irq, dev);
if (thisboard->bustype == isa_bustype && dev->iobase)
@ -1135,7 +1150,9 @@ static int labpc_ai_cmdtest(struct comedi_device *dev,
static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
{
int channel, range, aref;
#ifdef CONFIG_ISA_DMA_API
unsigned long irq_flags;
#endif
int ret;
struct comedi_async *async = s->async;
struct comedi_cmd *cmd = &async->cmd;
@ -1182,6 +1199,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->write_byte(INIT_A1_BITS,
dev->iobase + COUNTER_A_CONTROL_REG);
#ifdef CONFIG_ISA_DMA_API
/* figure out what method we will use to transfer data */
if (devpriv->dma_chan && /* need a dma channel allocated */
/*
@ -1193,7 +1211,9 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
thisboard->bustype == isa_bustype) {
xfer = isa_dma_transfer;
/* pc-plus has no fifo-half full interrupt */
} else if (thisboard->register_layout == labpc_1200_layout &&
} else
#endif
if (thisboard->register_layout == labpc_1200_layout &&
/* wake-end-of-scan should interrupt on fifo not empty */
(cmd->flags & TRIG_WAKE_EOS) == 0 &&
/* make sure we are taking more than just a few points */
@ -1317,6 +1337,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
labpc_clear_adc_fifo(dev);
#ifdef CONFIG_ISA_DMA_API
/* set up dma transfer */
if (xfer == isa_dma_transfer) {
irq_flags = claim_dma_lock();
@ -1340,6 +1361,7 @@ static int labpc_ai_cmd(struct comedi_device *dev, struct comedi_subdevice *s)
devpriv->command3_bits |= DMA_EN_BIT | DMATC_INTR_EN_BIT;
} else
devpriv->command3_bits &= ~DMA_EN_BIT & ~DMATC_INTR_EN_BIT;
#endif
/* enable error interrupts */
devpriv->command3_bits |= ERR_INTR_EN_BIT;
@ -1426,6 +1448,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
return IRQ_HANDLED;
}
#ifdef CONFIG_ISA_DMA_API
if (devpriv->current_transfer == isa_dma_transfer) {
/*
* if a dma terminal count of external stop trigger
@ -1437,6 +1460,7 @@ static irqreturn_t labpc_interrupt(int irq, void *d)
handle_isa_dma(dev);
}
} else
#endif
labpc_drain_fifo(dev);
if (devpriv->status1_bits & TIMER_BIT) {
@ -1509,6 +1533,7 @@ static int labpc_drain_fifo(struct comedi_device *dev)
return 0;
}
#ifdef CONFIG_ISA_DMA_API
static void labpc_drain_dma(struct comedi_device *dev)
{
struct comedi_subdevice *s = dev->read_subdev;
@ -1571,13 +1596,16 @@ static void handle_isa_dma(struct comedi_device *dev)
/* clear dma tc interrupt */
devpriv->write_byte(0x1, dev->iobase + DMATC_CLEAR_REG);
}
#endif
/* makes sure all data acquired by board is transferred to comedi (used
* when acquisition is terminated by stop_src == TRIG_EXT). */
static void labpc_drain_dregs(struct comedi_device *dev)
{
#ifdef CONFIG_ISA_DMA_API
if (devpriv->current_transfer == isa_dma_transfer)
labpc_drain_dma(dev);
#endif
labpc_drain_fifo(dev);
}
@ -1769,6 +1797,7 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev,
return 1;
}
#ifdef CONFIG_ISA_DMA_API
/* utility function that suggests a dma transfer size in bytes */
static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
{
@ -1792,6 +1821,7 @@ static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd)
return size;
}
#endif
/* figures out what counter values to use based on command */
static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd)