V4L/DVB: media/az6027: doing dma on the stack

I changed the dma buffers to use allocated memory instead of stack
memory.

The reason for this is documented in Documentation/DMA-API-HOWTO.txt
under the section:  "What memory is DMA'able?"  That document was only
added a couple weeks ago and there are still lots of modules which
haven't been corrected yet.  Btw. Smatch includes a pretty good test to
find places which use stack memory as a dma buffer.  That's how I found
these.  (http://smatch.sf.net).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

drivers/media/dvb/dvb-usb/az6027.c

@@ -417,11 +417,15 @@ static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
 	u16 value;
 	u16 index;
 	int blen;
-	u8 b[12];
+	u8 *b;
 
 	if (slot != 0)
 		return -EINVAL;
 
+	b = kmalloc(12, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
 	mutex_lock(&state->ca_mutex);
 
 	req = 0xC1;
@@ -438,6 +442,7 @@ static int az6027_ci_read_attribute_mem(struct dvb_ca_en50221 *ca,
 	}
 
 	mutex_unlock(&state->ca_mutex);
+	kfree(b);
 	return ret;
 }
 
@@ -485,11 +490,15 @@ static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
 	u16 value;
 	u16 index;
 	int blen;
-	u8 b[12];
+	u8 *b;
 
 	if (slot != 0)
 		return -EINVAL;
 
+	b = kmalloc(12, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
 	mutex_lock(&state->ca_mutex);
 
 	req = 0xC3;
@@ -510,6 +519,7 @@ static int az6027_ci_read_cam_control(struct dvb_ca_en50221 *ca,
 	}
 
 	mutex_unlock(&state->ca_mutex);
+	kfree(b);
 	return ret;
 }
 
@@ -556,7 +566,11 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
 	u16 value;
 	u16 index;
 	int blen;
-	u8 b[12];
+	u8 *b;
+
+	b = kmalloc(12, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
 
 	req = 0xC8;
 	value = 0;
@@ -570,6 +584,7 @@ static int CI_CamReady(struct dvb_ca_en50221 *ca, int slot)
 	} else{
 		ret = b[0];
 	}
+	kfree(b);
 	return ret;
 }
 
@@ -667,8 +682,11 @@ static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int o
 	u16 value;
 	u16 index;
 	int blen;
-	u8 b[12];
+	u8 *b;
 
+	b = kmalloc(12, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
 	mutex_lock(&state->ca_mutex);
 
 	req = 0xC5;
@@ -692,6 +710,7 @@ static int az6027_ci_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int o
 	}
 
 	mutex_unlock(&state->ca_mutex);
+	kfree(b);
 	return ret;
 }
 
@@ -943,10 +962,16 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 	u16 value;
 	int length;
 	u8 req;
-	u8 data[256];
+	u8 *data;
 
-	if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
+	data = kmalloc(256, GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	if (mutex_lock_interruptible(&d->i2c_mutex) < 0) {
+		kfree(data);
 		return -EAGAIN;
+	}
 
 	if (num > 2)
 		warn("more than 2 i2c messages at a time is not handled yet. TODO.");
@@ -1016,6 +1041,7 @@ static int az6027_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], int n
 		}
 	}
 	mutex_unlock(&d->i2c_mutex);
+	kfree(data);
 
 	return i;
 }
@@ -1036,8 +1062,14 @@ int az6027_identify_state(struct usb_device *udev,
 			  struct dvb_usb_device_description **desc,
 			  int *cold)
 {
-	u8 b[16];
-	s16 ret = usb_control_msg(udev,
+	u8 *b;
+	s16 ret;
+
+	b = kmalloc(16, GFP_KERNEL);
+	if (!b)
+		return -ENOMEM;
+
+	ret = usb_control_msg(udev,
 				  usb_rcvctrlpipe(udev, 0),
 				  0xb7,
 				  USB_TYPE_VENDOR | USB_DIR_IN,
@@ -1048,7 +1080,7 @@ int az6027_identify_state(struct usb_device *udev,
 				  USB_CTRL_GET_TIMEOUT);
 
 	*cold = ret <= 0;
-
+	kfree(b);
 	deb_info("cold: %d\n", *cold);
 	return 0;
 }