microsoft
/
WSL2-Linux-Kernel
зеркало из https://github.com/microsoft/WSL2-Linux-Kernel.git
1
0
Форкнуть 0
Код Задачи Пакеты Проекты Релизы Вики Активность

thermal: exynos: remove needless triminfo_ctrl abstraction 

reg->triminfo_ctrl[] is used in only exynos_tmu_initialize() and
accessed only if TMU_SUPPORT_TRIM_RELOAD flag is set.  This flag
is set only on Exynos3250, Exynos4412 and Exynos5250 (other SoC
types don't even have triminfo_ctrl[] entries assigned in their
struct exynos_tmu_registers instances) so the register abstraction
is not needed and can be removed.

There should be no functional changes caused by this patch.

Cc: Amit Daniel Kachhap <amit.daniel@samsung.com>
Cc: Lukasz Majewski <l.majewski@samsung.com>
Cc: Eduardo Valentin <edubezval@gmail.com>
Cc: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>
Acked-by: Kyungmin Park <kyungmin.park@samsung.com>
Tested-by: Lukasz Majewski <l.majewski@samsung.com>
Signed-off-by: Eduardo Valentin <edubezval@gmail.com>
This commit is contained in:
Bartlomiej Zolnierkiewicz 2014-11-13 16:00:59 +01:00 коммит произвёл Eduardo Valentin
Родитель 6b1fbbdeba
Коммит 32f9520569
4 изменённых файлов: 7 добавлений и 24 удалений
Показать статистику Скачать Patch файл Скачать Diff файл Показать все файлы Свернуть все файлы

1
drivers/thermal/samsung/exynos_thermal_common.h
Просмотреть файл

@ -27,7 +27,6 @@
#define SENSOR_NAME_LEN 16
#define MAX_TRIP_COUNT 8
#define MAX_COOLING_DEVICE 4
#define MAX_TRIMINFO_CTRL_REG 2
#define ACTIVE_INTERVAL 500
#define IDLE_INTERVAL 10000

15
drivers/thermal/samsung/exynos_tmu.c
Просмотреть файл

@ -162,15 +162,14 @@ static int exynos_tmu_initialize(struct platform_device *pdev)
}
if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) {
for (i = 0; i < reg->triminfo_ctrl_count; i++) {
if (pdata->triminfo_reload[i]) {
ctrl = readl(data->base +
reg->triminfo_ctrl[i]);
ctrl |= pdata->triminfo_reload[i];
writel(ctrl, data->base +
reg->triminfo_ctrl[i]);
}
if (data->soc == SOC_ARCH_EXYNOS3250) {
ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON1);
ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON1);
}
ctrl = readl(data->base + EXYNOS_TMU_TRIMINFO_CON2);
ctrl |= EXYNOS_TRIMINFO_RELOAD_ENABLE;
writel(ctrl, data->base + EXYNOS_TMU_TRIMINFO_CON2);
}
/* Save trimming info in order to perform calibration */

7
drivers/thermal/samsung/exynos_tmu.h
Просмотреть файл

@ -76,8 +76,6 @@ enum soc_type {
* struct exynos_tmu_register - register descriptors to access registers and
* bitfields. The register validity, offsets and bitfield values may vary
* slightly across different exynos SOC's.
* @triminfo_ctrl: trim info controller register.
* @triminfo_ctrl_count: the number of trim info controller register.
* @tmu_ctrl: TMU main controller register.
* @test_mux_addr_shift: shift bits of test mux address.
* @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register.
@ -104,9 +102,6 @@ enum soc_type {
* @tmu_pmin: register to get/set the Pmin value.
*/
struct exynos_tmu_registers {
u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG];
u32 triminfo_ctrl_count;
u32 tmu_ctrl;
u32 test_mux_addr_shift;
u32 therm_trip_mode_shift;
@ -184,7 +179,6 @@ struct exynos_tmu_registers {
* @second_point_trim: temp value of the second point trimming
* @default_temp_offset: default temperature offset in case of no trimming
* @test_mux; information if SoC supports test MUX
* @triminfo_reload: reload value to read TRIMINFO register
* @cal_type: calibration type for temperature
* @freq_clip_table: Table representing frequency reduction percentage.
* @freq_tab_count: Count of the above table as frequency reduction may
@ -215,7 +209,6 @@ struct exynos_tmu_platform_data {
u8 second_point_trim;
u8 default_temp_offset;
u8 test_mux;
u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG];
enum calibration_type cal_type;
enum soc_type type;

8
drivers/thermal/samsung/exynos_tmu_data.c
Просмотреть файл

@ -82,9 +82,6 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS3250)
static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1,
.triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2,
.triminfo_ctrl_count = 2,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
@ -140,8 +137,6 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = {
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos3250_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \
@ -163,8 +158,6 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = {
#if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250)
static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2,
.triminfo_ctrl_count = 1,
.tmu_ctrl = EXYNOS_TMU_REG_CONTROL,
.test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT,
.therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT,
@ -221,7 +214,6 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = {
.temp_level = 95, \
}, \
.freq_tab_count = 2, \
.triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \
.registers = &exynos4412_tmu_registers, \
.features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \
TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \