iwlegacy: fix tx_power initialization

priv->tx_power_next is not initialized to max supported power,
but instead default value is used, what cause errors like

[   58.597834] iwl3945 0000:03:00.0: Requested user TXPOWER 15 above upper limit 14.
[   58.597839] iwl3945 0000:03:00.0: Error setting Tx power (-22).

if maximum tx power read from the eeprom is smaller than default.
In consequence card is unable to initialize properly. Fix the problem
and cleanup tx power initialization.

Reported-and-tested-by: Robin Dong <hao.bigrat@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Stanislaw Gruszka 2011-04-13 10:56:51 +02:00 коммит произвёл John W. Linville
Родитель 50f6871218
Коммит 332704a514
6 изменённых файлов: 11 добавлений и 28 удалений

Просмотреть файл

@ -74,8 +74,6 @@
/* RSSI to dBm */
#define IWL39_RSSI_OFFSET 95
#define IWL_DEFAULT_TX_POWER 0x0F
/*
* EEPROM related constants, enums, and structures.
*/

Просмотреть файл

@ -804,9 +804,6 @@ struct iwl4965_scd_bc_tbl {
#define IWL4965_DEFAULT_TX_RETRY 15
/* Limit range of txpower output target to be between these values */
#define IWL4965_TX_POWER_TARGET_POWER_MIN (0) /* 0 dBm: 1 milliwatt */
/* EEPROM */
#define IWL4965_FIRST_AMPDU_QUEUE 10

Просмотреть файл

@ -160,6 +160,7 @@ int iwl_legacy_init_geos(struct iwl_priv *priv)
struct ieee80211_channel *geo_ch;
struct ieee80211_rate *rates;
int i = 0;
s8 max_tx_power = 0;
if (priv->bands[IEEE80211_BAND_2GHZ].n_bitrates ||
priv->bands[IEEE80211_BAND_5GHZ].n_bitrates) {
@ -235,8 +236,8 @@ int iwl_legacy_init_geos(struct iwl_priv *priv)
geo_ch->flags |= ch->ht40_extension_channel;
if (ch->max_power_avg > priv->tx_power_device_lmt)
priv->tx_power_device_lmt = ch->max_power_avg;
if (ch->max_power_avg > max_tx_power)
max_tx_power = ch->max_power_avg;
} else {
geo_ch->flags |= IEEE80211_CHAN_DISABLED;
}
@ -249,6 +250,10 @@ int iwl_legacy_init_geos(struct iwl_priv *priv)
geo_ch->flags);
}
priv->tx_power_device_lmt = max_tx_power;
priv->tx_power_user_lmt = max_tx_power;
priv->tx_power_next = max_tx_power;
if ((priv->bands[IEEE80211_BAND_5GHZ].n_channels == 0) &&
priv->cfg->sku & IWL_SKU_A) {
IWL_INFO(priv, "Incorrectly detected BG card as ABG. "
@ -1124,11 +1129,11 @@ int iwl_legacy_set_tx_power(struct iwl_priv *priv, s8 tx_power, bool force)
if (!priv->cfg->ops->lib->send_tx_power)
return -EOPNOTSUPP;
if (tx_power < IWL4965_TX_POWER_TARGET_POWER_MIN) {
/* 0 dBm mean 1 milliwatt */
if (tx_power < 0) {
IWL_WARN(priv,
"Requested user TXPOWER %d below lower limit %d.\n",
tx_power,
IWL4965_TX_POWER_TARGET_POWER_MIN);
"Requested user TXPOWER %d below 1 mW.\n",
tx_power);
return -EINVAL;
}

Просмотреть файл

@ -471,13 +471,6 @@ int iwl_legacy_init_channel_map(struct iwl_priv *priv)
flags & EEPROM_CHANNEL_RADAR))
? "" : "not ");
/* Set the tx_power_user_lmt to the highest power
* supported by any channel */
if (eeprom_ch_info[ch].max_power_avg >
priv->tx_power_user_lmt)
priv->tx_power_user_lmt =
eeprom_ch_info[ch].max_power_avg;
ch_info++;
}
}

Просмотреть файл

@ -3825,10 +3825,6 @@ static int iwl3945_init_drv(struct iwl_priv *priv)
priv->force_reset[IWL_FW_RESET].reset_duration =
IWL_DELAY_NEXT_FORCE_FW_RELOAD;
priv->tx_power_user_lmt = IWL_DEFAULT_TX_POWER;
priv->tx_power_next = IWL_DEFAULT_TX_POWER;
if (eeprom->version < EEPROM_3945_EEPROM_VERSION) {
IWL_WARN(priv, "Unsupported EEPROM version: 0x%04X\n",
eeprom->version);

Просмотреть файл

@ -3140,12 +3140,6 @@ static int iwl4965_init_drv(struct iwl_priv *priv)
iwl_legacy_init_scan_params(priv);
/* Set the tx_power_user_lmt to the lowest power level
* this value will get overwritten by channel max power avg
* from eeprom */
priv->tx_power_user_lmt = IWL4965_TX_POWER_TARGET_POWER_MIN;
priv->tx_power_next = IWL4965_TX_POWER_TARGET_POWER_MIN;
ret = iwl_legacy_init_channel_map(priv);
if (ret) {
IWL_ERR(priv, "initializing regulatory failed: %d\n", ret);