usb: phy: samsung: Introducing usb phy driver for hsotg
This driver uses usb_phy interface to interact with s3c-hsotg. Supports phy_init and phy_shutdown functions to enable/disable usb phy. Support will be extended to host controllers and more Samsung SoCs. Signed-off-by: Praveen Paneri <p.paneri@samsung.com> Acked-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Felipe Balbi <balbi@ti.com>
This commit is contained in:
Praveen Paneri
Felipe Balbi
Родитель
04a6221c50
Коммит
337dc3a768
|
|
@ -0,0 +1,11 @@
|
|||
* Samsung's usb phy transceiver
|
||||
|
||||
The Samsung's phy transceiver is used for controlling usb otg phy for
|
||||
s3c-hsotg usb device controller.
|
||||
TODO: Adding the PHY binding with controller(s) according to the under
|
||||
developement generic PHY driver.
|
||||
|
||||
Required properties:
|
||||
- compatible : should be "samsung,exynos4210-usbphy"
|
||||
- reg : base physical address of the phy registers and length of memory mapped
|
||||
region.
|
||||
|
|
@ -45,3 +45,11 @@ config USB_RCAR_PHY
|
|||
|
||||
To compile this driver as a module, choose M here: the
|
||||
module will be called rcar-phy.
|
||||
|
||||
config SAMSUNG_USBPHY
|
||||
bool "Samsung USB PHY controller Driver"
|
||||
depends on USB_S3C_HSOTG
|
||||
select USB_OTG_UTILS
|
||||
help
|
||||
Enable this to support Samsung USB phy controller for samsung
|
||||
SoCs.
|
||||
|
|
|
|||
|
|
@ -9,3 +9,4 @@ obj-$(CONFIG_USB_ISP1301) += isp1301.o
|
|||
obj-$(CONFIG_MV_U3D_PHY) += mv_u3d_phy.o
|
||||
obj-$(CONFIG_USB_EHCI_TEGRA) += tegra_usb_phy.o
|
||||
obj-$(CONFIG_USB_RCAR_PHY) += rcar-phy.o
|
||||
obj-$(CONFIG_SAMSUNG_USBPHY) += samsung-usbphy.o
|
||||
|
|
|
|||
|
|
@ -0,0 +1,354 @@
|
|||
/* linux/drivers/usb/phy/samsung-usbphy.c
|
||||
*
|
||||
* Copyright (c) 2012 Samsung Electronics Co., Ltd.
|
||||
* http://www.samsung.com
|
||||
*
|
||||
* Author: Praveen Paneri <p.paneri@samsung.com>
|
||||
*
|
||||
* Samsung USB2.0 High-speed OTG transceiver, talks to S3C HS OTG controller
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License version 2 as
|
||||
* published by the Free Software Foundation.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*/
|
||||
|
||||
#include <linux/module.h>
|
||||
#include <linux/platform_device.h>
|
||||
#include <linux/clk.h>
|
||||
#include <linux/delay.h>
|
||||
#include <linux/err.h>
|
||||
#include <linux/io.h>
|
||||
#include <linux/of.h>
|
||||
#include <linux/usb/otg.h>
|
||||
#include <linux/platform_data/samsung-usbphy.h>
|
||||
|
||||
/* Register definitions */
|
||||
|
||||
#define SAMSUNG_PHYPWR (0x00)
|
||||
|
||||
#define PHYPWR_NORMAL_MASK (0x19 << 0)
|
||||
#define PHYPWR_OTG_DISABLE (0x1 << 4)
|
||||
#define PHYPWR_ANALOG_POWERDOWN (0x1 << 3)
|
||||
#define PHYPWR_FORCE_SUSPEND (0x1 << 1)
|
||||
/* For Exynos4 */
|
||||
#define PHYPWR_NORMAL_MASK_PHY0 (0x39 << 0)
|
||||
#define PHYPWR_SLEEP_PHY0 (0x1 << 5)
|
||||
|
||||
#define SAMSUNG_PHYCLK (0x04)
|
||||
|
||||
#define PHYCLK_MODE_USB11 (0x1 << 6)
|
||||
#define PHYCLK_EXT_OSC (0x1 << 5)
|
||||
#define PHYCLK_COMMON_ON_N (0x1 << 4)
|
||||
#define PHYCLK_ID_PULL (0x1 << 2)
|
||||
#define PHYCLK_CLKSEL_MASK (0x3 << 0)
|
||||
#define PHYCLK_CLKSEL_48M (0x0 << 0)
|
||||
#define PHYCLK_CLKSEL_12M (0x2 << 0)
|
||||
#define PHYCLK_CLKSEL_24M (0x3 << 0)
|
||||
|
||||
#define SAMSUNG_RSTCON (0x08)
|
||||
|
||||
#define RSTCON_PHYLINK_SWRST (0x1 << 2)
|
||||
#define RSTCON_HLINK_SWRST (0x1 << 1)
|
||||
#define RSTCON_SWRST (0x1 << 0)
|
||||
|
||||
#ifndef MHZ
|
||||
#define MHZ (1000*1000)
|
||||
#endif
|
||||
|
||||
enum samsung_cpu_type {
|
||||
TYPE_S3C64XX,
|
||||
TYPE_EXYNOS4210,
|
||||
};
|
||||
|
||||
/*
|
||||
* struct samsung_usbphy - transceiver driver state
|
||||
* @phy: transceiver structure
|
||||
* @plat: platform data
|
||||
* @dev: The parent device supplied to the probe function
|
||||
* @clk: usb phy clock
|
||||
* @regs: usb phy register memory base
|
||||
* @ref_clk_freq: reference clock frequency selection
|
||||
* @cpu_type: machine identifier
|
||||
*/
|
||||
struct samsung_usbphy {
|
||||
struct usb_phy phy;
|
||||
struct samsung_usbphy_data *plat;
|
||||
struct device *dev;
|
||||
struct clk *clk;
|
||||
void __iomem *regs;
|
||||
int ref_clk_freq;
|
||||
int cpu_type;
|
||||
};
|
||||
|
||||
#define phy_to_sphy(x) container_of((x), struct samsung_usbphy, phy)
|
||||
|
||||
/*
|
||||
* Returns reference clock frequency selection value
|
||||
*/
|
||||
static int samsung_usbphy_get_refclk_freq(struct samsung_usbphy *sphy)
|
||||
{
|
||||
struct clk *ref_clk;
|
||||
int refclk_freq = 0;
|
||||
|
||||
ref_clk = clk_get(sphy->dev, "xusbxti");
|
||||
if (IS_ERR(ref_clk)) {
|
||||
dev_err(sphy->dev, "Failed to get reference clock\n");
|
||||
return PTR_ERR(ref_clk);
|
||||
}
|
||||
|
||||
switch (clk_get_rate(ref_clk)) {
|
||||
case 12 * MHZ:
|
||||
refclk_freq = PHYCLK_CLKSEL_12M;
|
||||
break;
|
||||
case 24 * MHZ:
|
||||
refclk_freq = PHYCLK_CLKSEL_24M;
|
||||
break;
|
||||
case 48 * MHZ:
|
||||
refclk_freq = PHYCLK_CLKSEL_48M;
|
||||
break;
|
||||
default:
|
||||
if (sphy->cpu_type == TYPE_S3C64XX)
|
||||
refclk_freq = PHYCLK_CLKSEL_48M;
|
||||
else
|
||||
refclk_freq = PHYCLK_CLKSEL_24M;
|
||||
break;
|
||||
}
|
||||
clk_put(ref_clk);
|
||||
|
||||
return refclk_freq;
|
||||
}
|
||||
|
||||
static void samsung_usbphy_enable(struct samsung_usbphy *sphy)
|
||||
{
|
||||
void __iomem *regs = sphy->regs;
|
||||
u32 phypwr;
|
||||
u32 phyclk;
|
||||
u32 rstcon;
|
||||
|
||||
/* set clock frequency for PLL */
|
||||
phyclk = sphy->ref_clk_freq;
|
||||
phypwr = readl(regs + SAMSUNG_PHYPWR);
|
||||
rstcon = readl(regs + SAMSUNG_RSTCON);
|
||||
|
||||
switch (sphy->cpu_type) {
|
||||
case TYPE_S3C64XX:
|
||||
phyclk &= ~PHYCLK_COMMON_ON_N;
|
||||
phypwr &= ~PHYPWR_NORMAL_MASK;
|
||||
rstcon |= RSTCON_SWRST;
|
||||
break;
|
||||
case TYPE_EXYNOS4210:
|
||||
phypwr &= ~PHYPWR_NORMAL_MASK_PHY0;
|
||||
rstcon |= RSTCON_SWRST;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
writel(phyclk, regs + SAMSUNG_PHYCLK);
|
||||
/* Configure PHY0 for normal operation*/
|
||||
writel(phypwr, regs + SAMSUNG_PHYPWR);
|
||||
/* reset all ports of PHY and Link */
|
||||
writel(rstcon, regs + SAMSUNG_RSTCON);
|
||||
udelay(10);
|
||||
rstcon &= ~RSTCON_SWRST;
|
||||
writel(rstcon, regs + SAMSUNG_RSTCON);
|
||||
}
|
||||
|
||||
static void samsung_usbphy_disable(struct samsung_usbphy *sphy)
|
||||
{
|
||||
void __iomem *regs = sphy->regs;
|
||||
u32 phypwr;
|
||||
|
||||
phypwr = readl(regs + SAMSUNG_PHYPWR);
|
||||
|
||||
switch (sphy->cpu_type) {
|
||||
case TYPE_S3C64XX:
|
||||
phypwr |= PHYPWR_NORMAL_MASK;
|
||||
break;
|
||||
case TYPE_EXYNOS4210:
|
||||
phypwr |= PHYPWR_NORMAL_MASK_PHY0;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
|
||||
/* Disable analog and otg block power */
|
||||
writel(phypwr, regs + SAMSUNG_PHYPWR);
|
||||
}
|
||||
|
||||
/*
|
||||
* The function passed to the usb driver for phy initialization
|
||||
*/
|
||||
static int samsung_usbphy_init(struct usb_phy *phy)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
int ret = 0;
|
||||
|
||||
sphy = phy_to_sphy(phy);
|
||||
|
||||
/* Enable the phy clock */
|
||||
ret = clk_prepare_enable(sphy->clk);
|
||||
if (ret) {
|
||||
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/* Disable phy isolation */
|
||||
if (sphy->plat && sphy->plat->pmu_isolation)
|
||||
sphy->plat->pmu_isolation(false);
|
||||
|
||||
/* Initialize usb phy registers */
|
||||
samsung_usbphy_enable(sphy);
|
||||
|
||||
/* Disable the phy clock */
|
||||
clk_disable_unprepare(sphy->clk);
|
||||
return ret;
|
||||
}
|
||||
|
||||
/*
|
||||
* The function passed to the usb driver for phy shutdown
|
||||
*/
|
||||
static void samsung_usbphy_shutdown(struct usb_phy *phy)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
|
||||
sphy = phy_to_sphy(phy);
|
||||
|
||||
if (clk_prepare_enable(sphy->clk)) {
|
||||
dev_err(sphy->dev, "%s: clk_prepare_enable failed\n", __func__);
|
||||
return;
|
||||
}
|
||||
|
||||
/* De-initialize usb phy registers */
|
||||
samsung_usbphy_disable(sphy);
|
||||
|
||||
/* Enable phy isolation */
|
||||
if (sphy->plat && sphy->plat->pmu_isolation)
|
||||
sphy->plat->pmu_isolation(true);
|
||||
|
||||
clk_disable_unprepare(sphy->clk);
|
||||
}
|
||||
|
||||
static const struct of_device_id samsung_usbphy_dt_match[];
|
||||
|
||||
static inline int samsung_usbphy_get_driver_data(struct platform_device *pdev)
|
||||
{
|
||||
if (pdev->dev.of_node) {
|
||||
const struct of_device_id *match;
|
||||
match = of_match_node(samsung_usbphy_dt_match,
|
||||
pdev->dev.of_node);
|
||||
return (int) match->data;
|
||||
}
|
||||
|
||||
return platform_get_device_id(pdev)->driver_data;
|
||||
}
|
||||
|
||||
static int __devinit samsung_usbphy_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct samsung_usbphy *sphy;
|
||||
struct samsung_usbphy_data *pdata;
|
||||
struct device *dev = &pdev->dev;
|
||||
struct resource *phy_mem;
|
||||
void __iomem *phy_base;
|
||||
struct clk *clk;
|
||||
|
||||
pdata = pdev->dev.platform_data;
|
||||
if (!pdata) {
|
||||
dev_err(&pdev->dev, "%s: no platform data defined\n", __func__);
|
||||
return -EINVAL;
|
||||
}
|
||||
|
||||
phy_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||||
if (!phy_mem) {
|
||||
dev_err(dev, "%s: missing mem resource\n", __func__);
|
||||
return -ENODEV;
|
||||
}
|
||||
|
||||
phy_base = devm_request_and_ioremap(dev, phy_mem);
|
||||
if (!phy_base) {
|
||||
dev_err(dev, "%s: register mapping failed\n", __func__);
|
||||
return -ENXIO;
|
||||
}
|
||||
|
||||
sphy = devm_kzalloc(dev, sizeof(*sphy), GFP_KERNEL);
|
||||
if (!sphy)
|
||||
return -ENOMEM;
|
||||
|
||||
clk = devm_clk_get(dev, "otg");
|
||||
if (IS_ERR(clk)) {
|
||||
dev_err(dev, "Failed to get otg clock\n");
|
||||
return PTR_ERR(clk);
|
||||
}
|
||||
|
||||
sphy->dev = &pdev->dev;
|
||||
sphy->plat = pdata;
|
||||
sphy->regs = phy_base;
|
||||
sphy->clk = clk;
|
||||
sphy->phy.dev = sphy->dev;
|
||||
sphy->phy.label = "samsung-usbphy";
|
||||
sphy->phy.init = samsung_usbphy_init;
|
||||
sphy->phy.shutdown = samsung_usbphy_shutdown;
|
||||
sphy->cpu_type = samsung_usbphy_get_driver_data(pdev);
|
||||
sphy->ref_clk_freq = samsung_usbphy_get_refclk_freq(sphy);
|
||||
|
||||
platform_set_drvdata(pdev, sphy);
|
||||
|
||||
return usb_add_phy(&sphy->phy, USB_PHY_TYPE_USB2);
|
||||
}
|
||||
|
||||
static int __exit samsung_usbphy_remove(struct platform_device *pdev)
|
||||
{
|
||||
struct samsung_usbphy *sphy = platform_get_drvdata(pdev);
|
||||
|
||||
usb_remove_phy(&sphy->phy);
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#ifdef CONFIG_OF
|
||||
static const struct of_device_id samsung_usbphy_dt_match[] = {
|
||||
{
|
||||
.compatible = "samsung,s3c64xx-usbphy",
|
||||
.data = (void *)TYPE_S3C64XX,
|
||||
}, {
|
||||
.compatible = "samsung,exynos4210-usbphy",
|
||||
.data = (void *)TYPE_EXYNOS4210,
|
||||
},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, samsung_usbphy_dt_match);
|
||||
#endif
|
||||
|
||||
static struct platform_device_id samsung_usbphy_driver_ids[] = {
|
||||
{
|
||||
.name = "s3c64xx-usbphy",
|
||||
.driver_data = TYPE_S3C64XX,
|
||||
}, {
|
||||
.name = "exynos4210-usbphy",
|
||||
.driver_data = TYPE_EXYNOS4210,
|
||||
},
|
||||
{},
|
||||
};
|
||||
|
||||
MODULE_DEVICE_TABLE(platform, samsung_usbphy_driver_ids);
|
||||
|
||||
static struct platform_driver samsung_usbphy_driver = {
|
||||
.probe = samsung_usbphy_probe,
|
||||
.remove = __devexit_p(samsung_usbphy_remove),
|
||||
.id_table = samsung_usbphy_driver_ids,
|
||||
.driver = {
|
||||
.name = "samsung-usbphy",
|
||||
.owner = THIS_MODULE,
|
||||
.of_match_table = of_match_ptr(samsung_usbphy_dt_match),
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(samsung_usbphy_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Samsung USB phy controller");
|
||||
MODULE_AUTHOR("Praveen Paneri <p.paneri@samsung.com>");
|
||||
MODULE_LICENSE("GPL");
|
||||
MODULE_ALIAS("platform:samsung-usbphy");
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
/*
|
||||
* Copyright (C) 2012 Samsung Electronics Co.Ltd
|
||||
* http://www.samsung.com/
|
||||
* Author: Praveen Paneri <p.paneri@samsung.com>
|
||||
*
|
||||
* Defines platform data for samsung usb phy driver.
|
||||
*
|
||||
* This program is free software; you can redistribute it and/or modify it
|
||||
* under the terms of the GNU General Public License as published by the
|
||||
* Free Software Foundation; either version 2 of the License, or (at your
|
||||
* option) any later version.
|
||||
*/
|
||||
|
||||
#ifndef __SAMSUNG_USBPHY_PLATFORM_H
|
||||
#define __SAMSUNG_USBPHY_PLATFORM_H
|
||||
|
||||
/**
|
||||
* samsung_usbphy_data - Platform data for USB PHY driver.
|
||||
* @pmu_isolation: Function to control usb phy isolation in PMU.
|
||||
*/
|
||||
struct samsung_usbphy_data {
|
||||
void (*pmu_isolation)(int on);
|
||||
};
|
||||
|
||||
extern void samsung_usbphy_set_pdata(struct samsung_usbphy_data *pd);
|
||||
|
||||
#endif /* __SAMSUNG_USBPHY_PLATFORM_H */
|
||||
Загрузка…
Ссылка в новой задаче